USER MANUAL

“
“ THANK YOU FOR CHOOSING A DERYA ARMS PRODUCT
THIS BOOKLET WILL GUIDE YOU THROUGH HANDLING YOUR FIREARM SAFELY

MAINTENANCE INSTRUCTIONS:
PLEASE NOTE: CHANGES MAY BE
1) NEVER MAKE CHANGES OR ALTERATIONS TO YOUR
MADE WITHOUT NOTICE SHOTGUN
This shotgun was built to a proven and tested design, and
Your shotgun features an innovative and unique design. With manufactured with care. It must NEVER be altered or changed.
regular care and cleaning, your firearm will serve you for a life Changing or altering any part of your shotgun may result in
time. The firearm was manufactured by DERYA ARMS from serious injuries to you or others, and is NOT RECOMMENDED
high quality raw materials and with high-tech CNC machines by the manufacturer. Any changes made to the shotgun or
in our factory. use of non-factory parts voids the factory warranty.

Please read and understand all the directions and instructions 2) PROPER CARE AND STORAGE
in this Manual to guarantee the best performance and a Regular care and cleaning of your firearm is key to its proper
safe shooting experience. Maintain your firearm properly in functionality and reliability. ALWAYS make sure that the
accordance with these instructions so it will remain safe, and firearm is UNLOADED before you leave the range and check
performs properly. it again before you start the cleaning process.

Always remember that you are using a firearm; always follow

all safety rules and be aware that it is your responsibility to THE RESPONSIBILITIES OF THE USER
share your knowledge, and educate others in the safe use of The laws of your country give you the right to possess a
this firearm. hunting firearm. Appreciate and enjoy your rights with care.
Be aware that, as an owner of a firearm, you are responsible
Before firing a cartridge, learn the parts of your firearm and for ensuring your own safety and that of your shooting
understand how it operates. Please read this manual carefully partners, observers, and the environment.
and enjoy your firearm safely.

01
 DISCLAIMER IMPORTANT WARNING

This firearm is sold with the understanding that the buyer 1) Read the instructions booklet completely before using
will obey all applicable domestic laws, therefore Derya your firearm.
Arms is not responsible for death or injuries caused by 2) Always be aware of the handling and functional
incorrect or irresponsible use. characteristics of your firearms.
3) Always unload your firearm when not in use (remove all
cartridges).
DERYA ARMS DOES NOT ACCEPT ANY
RESPONSIBILITIES FOR DAMAGE DUE TO When stored or not in use, firearms should always be
THE FOLLOWING CAUSES unloaded and move the safety lever to the WHITE position to
block the trigger of your firearm.
1) INCORRECT OR IRRESPONSIBLE USE OF THE FIREARM
2) USE OF INCORRECT GAUGE AMMUNITION OR RELOADED, Always remove all cartridges and inspect the chamber to
DAMAGED OR INPROPER CARTRIDGES ensure your firearm is unloaded.
3) INSUFFICIENT AND/OR INCORRECT MAINTENANCE OR 1) After shooting.
CLEANING WHICH CAUSES TO DAMAGE OR WEAR 2) Before racking or after picking up the firearm.
4) SALE CONTRARY TO APPLICABLE LAWS AND REGULATIONS 3) Before putting the gun into its case.
5) CHANGING OR CONVERSION OF THE FIREARM’S 4) Any time you are not using your firearm.
ORIGINAL DESIGN, OPERATING MECHANISM, ACCESSORIES, 5) Before handing your gun to anyone else.
MAGAZINES OR MECHANICALS 4) ALWAYS KEEP YOUR FIREARM POINTED IN A SAFE
6) CARELESS, DANGEROUS OR CRIMINAL USE DIRECTION. This ensures you do not injure yourself or anyone
7) USING THE FIREARM WITHOUT FIRST READING, else.
UNDERSTANDING AND FOLLOWING ALL SAFETY RULES 5) ALWAYS STORE YOUR FIREARM OUT OF REACH OF
8) ANY OTHER USE OR ACTION THAT IS BEYOND THE DIRECT CHILDREN OR OTHER UNAUTHORIZED PEOPLE. There are
CONTROL OF THE MANUFACTURER many ways of keeping your firearms locked and stored safely
and securely. Always secure your firearm in accordance
with applicable laws in your area and always unload and
then lock the firearm when not in use or whenever it will be
unattended.

02
6) ALWAYS OBEY ALL LAWS REGARDING OWNERSHIP, 10) ENSURE THE BARREL IS NOT PLUGGED OR OBSTRUCTED
TRANSPORT, AND SHOOTING YOUR FIREARM. Never point BEFORE YOU LOAD YOUR GUN. The barrel should not have
your firearm at a person. Do not harm any person or damage any residue from bore cleaning solvent or oil, or any other
any public property. foreign material inside the bore, chamber or choke. If the
barrel is blocked or otherwise obstructed, even partially,
7) IF YOUR FIREARM DOES NOT FIRE AFTER PULLING THE this may cause bulging and/or a breech explosion and/or a
TRIGGER: STOP, WAIT A MINUTE, AND USE EXTRA CAUTION split barrel. If you feel a strange recoil or the report sounds
WHEN OPENING THE BOLT. If your firearm did not fire after unusually loud or soft STOP SHOOTING IMMEDIATELY and
pulling the trigger STOP! Keep the firearm pointed in a safe check the barrel for obstructions and bulges.
direction, apply the safety by moving the safety lever to the
white position. Wait 60 seconds. Carefully open the bolt NEVER try to clear an obstruction in your barrel by firing
by pulling the cocking handle and eject the shell in a safe another shell!
direction. Always remember when you experience a misfire,
your firearm is still loaded and could fire at any time (a “hang ANY PARTIAL OR COMPLETE BORE OBSTRUCTION can cause
fire”). serious injury or death to the shooter or bystanders.

8) ALWAYS TREAT YOUR FIREARM AS IF IT IS LOADED, EVEN

WHEN THE SAFETY IS ON. Always keep your finger away from
the trigger unless you are on target and prepared to shoot. SERIAL NUMBER
Never forget that even with safety ON, you are responsible
for the direction your firearm is pointing. Do not count on a
mechanical device. The serial number is engraved on the firearm on several
places. Every firearm has a unique number. This number is
9) This firearm was produced under the control and used for legal and warranty matters. Derya suggests that
supervision of Derya Arms. The firearm must never be altered. owners note and store the serial numbers of all of your
Derya does not recommended the use of any spare parts or firearms in a secure location away from the firearms.
accessories and magazines other than those included in the
original box or received from Derya. If you need magazines,
spare parts or repair, contact our authorized distributor in
your country or Derya Arms ONLY.

03
 MK-12 DISASSEMBLY OF THE FIREARM

1) Remove the magazine. 4) Push the detaching pin and pull 7) Unscrew the gas system retaining 10) Remove the charging handle by
from the other side until it sets. nut by turning in arrow direction. pulling it.
2) Unscrew the barrel shroud by
turning in arrow direction. 5) Push the other detaching pin and 8) Remove the split rings. At this 11) Remove both barrel screws with
pull from the other side until it sets. stage you can change the pistons. an allen wrench one at a time.
3) Pull the foreend in arrow
direction. 6) Detach upper from lower. 9) Remove the piston, slide and gas 12) Pull out the bolt assembly in
block by pulling in arrow direction. arrow direction.

1 4 7 10

2 5 8 11

3 6 9 12

04
 MK-12 DAXOS® & BUFFERBOLT® SYSTEM

1) Pull the charging handle. 2) Insert the charging handle from 3) Make sure the handle is set. BufferBolt® System
the other side.

1 2 3

Heavy Loads Piston

USAGE OF CHOKE TUBES Choke Tube Wrench
3” Shotshells (Magnum)
Light Loads Piston
Never fire or gun cleaning tools through a barrel that uses choke 23/4” Shotshells
tubes without having tube installed. The threads of the choke tube
and the internal threads of the barrel should be cleaned after each
use and before installation of the tube.

To install a tube, insert the tube into the barrel and tighten with
your fingers. Once the tube is finger-tightened, tighten with the
appropriate choke-tube wrench until the tube is snug. DO NOT over
tighten or forcefully tighten with wrench.

MARKING USAGE OF CHOKE TUBES NOTCHES

FULL Suitable for longer ranges (DON’T USE SLUGS!)
MODIFIED Suitable for medium ranges (DON’T USE SLUGS!)
CYLINDER Suitable for short ranges

05
MK-12 BASIC PARTS
P.NO PART NAME P.NO PART NAME P.NO PART NAME P.NO PART NAME
1 Lower Receiver 34 Stock Support 67 Gas Block Screws 100 Magazine Follower Extractor Pin (Opt.)
2 Trigger 35 Pivot Nut 68 Gas System Retaining Nut 101 Magazine Spring
3 Disconnector Spring 36 Sling Plate 69 Forend 102 Magazine Base Plate Retainer
4 Disconnector 37 Detent Ball 70 Handguard 103 Magazine Base Plate
5 Trigger Spring 38 Bolt Buffer 71 Handguard Retaining Screw
6 Trigger Pin 39 Bolt Return Spring 72 Handguard Pivot Nut Note:
7 Crescent Washer 40 Lock Ring 73 Handguard Pivot Polymer Nut Some models will vary from exploded view.
8 Hammer 41 Extractor Spring 74 Barrel Shroud
9 Hammer Pin Sleeve. Male 42 Extractor Pin 75 Sling Swivel
10 Hammer Pin Sleeve. Female 43 Pivot Pin 76 Sling Swivel Screw
11 Hammer Spring 44 Upper Receiver 77 Flip-up Assembly (Rear)
12 Hammer Pin 45 Pin 78 Flip-up Nut (Rear)
13 Crescent Washer (Optional) 46 Slide Carrier 79 Flip-up Screw (Rear)
14 Safety 47 Ball Spring 80 Flip-up Assembly (Front)
15 Safety Lever 48 5 Ø Ball 81 Flip-up Nut (Front)
16 Safety Lever 49 Bolt 82 Flip-up Screw (Front)
17 Safety Retaining Screw 50 Buffer Bolt System 83 Mobile Choke
18 Safety Retaining Screw 51 Lock 84 Pistol Grip
19 Safety Detent 52 Firing Pin Return Spring 85 Washer
20 Safety Spring 53 Firing Pin 86 M6 Screw
21 M4 Screw 54 Firing Pin Retaining Pin 87 Pistol Grip Cap
22 Bolt Catch 55 Extractor Spring 88 Pistol Grip Cap Screw
23 Bolt Catch Spring 56 Extractor Spring Pin 89 Stock
24 Bolt Catch Pin 57 Extractor 90 Cheek Piece Housing
25 Magazine Catch 58 Extractor Spring Pin 91 Cheek Piece Housing
26 Magazine Catch Spring 59 Cocking Handle 92 Adjustable Cheek Piece
27 Magazine Catch Button 60 Barrel With Barrel Extension 93 Cheek Piece Adjuster
28 Magazine Catch Screw 61 M8 Screw 94 Cheek Piece Fiber Nut
29 M6 Screw 62 M8 Screw 95 Cheek Piece Nut
30 Takedown Pin 63 Slide With Slide Extension 96 Magazine
31 Extractor Spring Pin 64 Gas Piston 97 Magazine Follower
32 Extractor Spring 65 Gas Block 98 Magazine Follower Extractor Spring
33 M4 Screw 66 Gas Block O-Ring 99 Magazine Follower Extractor

06
MK-12 MAG FED SHOTGUN

78 80
77
44 69

45 70 72 73 81
40 79
39 82
38
71
61 60 75
34

35 21
62 76
36
20 74
51
89 19 14 50
17
18 49
92
58
33 53
37 16 15 52
32 55 56
54 83
57
31
30 41 48
42 47
93
1 65
66
67
46 68
84 43 59
85 63
90 86 64
25
91 87
94
95 88
29 26
8 96
27
28 12
13
11 100
4 6
9
97 98
10
3

22
99

5 23
7 101
2

24

102

103

07
 MK-20 DISASSEMBLY OF THE FIREARM

1) Remove the magazine. 4) Push the detaching pin and pull 7) Unscrew the gas system retaining 10) Remove the charging handle by
from the other side until it sets. nut by turning in arrow direction. pulling it.
2) Unscrew the barrel shroud by
turning in arrow direction. 5) Push the other detaching pin and 8) Remove the split rings. At this 11) Remove both barrel screws with
pull from the other side until it sets. stage you can change the pistons. an allen wrench one at a time.
3) Pull the foreend in arrow
direction. 6) Detach upper from lower. 9) Remove the piston, slide and gas 12) Pull out the bolt assembly in
block by pulling in arrow direction. arrow direction.

1 4 7 10

2 5 8 11

3 6 9 12

08
 MK-20 DAXOS® & BUFFERBOLT® SYSTEM

1) Pull the charging handle. 2) Insert the charging handle from 3) Make sure the handle is set. BufferBolt® System
the other side.

1 2 3

Heavy Loads Piston

USAGE OF CHOKE TUBES Choke Tube Wrench
3” Shotshells (Magnum)
Light Loads Piston
Never fire or gun cleaning tools through a barrel that uses choke 23/4” Shotshells
tubes without having tube installed. The threads of the choke tube
and the internal threads of the barrel should be cleaned after each
use and before installation of the tube.

To install a tube, insert the tube into the barrel and tighten with
your fingers. Once the tube is finger-tightened, tighten with the
appropriate choke-tube wrench until the tube is snug. DO NOT over
tighten or forcefully tighten with wrench.

MARKING USAGE OF CHOKE TUBES NOTCHES

FULL Suitable for longer ranges (DON’T USE SLUGS!)
MODIFIED Suitable for medium ranges (DON’T USE SLUGS!)
CYLINDER Suitable for short ranges

09
MK-20 BASIC PARTS
P.NO PART NAME P.NO PART NAME P.NO PART NAME P.NO PART NAME
1 Lower Receiver 34 Stock Support 67 Gas Block Screws 100 Magazine Follower Extractor Pin
2 Trigger 35 Pivot Nut 68 Gas System Retaining Nut 101 Magazine Spring
3 Disconnector Spring 36 Sling Plate 69 Forend 102 Magazine Base Plate Retainer
4 Disconnector 37 Detent Ball 70 Handguard 103 Magazine Base Plate
5 Trigger Spring 38 Bolt Buffer 71 Handguard Retaining Screw
6 Trigger Pin 39 Bolt Return Spring 72 Handguard Pivot Nut
7 Crescent Washer 40 Lock Ring 73 Handguard Pivot Polymer Nut
8 Hammer 41 Extractor Spring 74 Barrel Shroud
9 Hammer Pin Sleeve. Male 42 Extractor Pin 75 Sling Swivel
10 Hammer Pin Sleeve. Female 43 Pivot Pin 76 Sling Swivel Screw
11 Hammer Spring 44 Upper Receiver 77 Flip-up Assembly (Rear)
12 Hammer Pin 45 Pin 78 Flip-up Nut (Rear)
13 Crescent Washer 46 Slide Carrier 79 Flip-up Screw (Rear)
14 Safety 47 Ball Spring 80 Flip-up Assembly (Front)
15 Safety Lever 48 5 Ø Ball 81 Flip-up Nut (Front)
16 Safety Lever 49 Bolt 82 Flip-up Screw (Front)
17 Safety Retaining Screw 50 Buffer Bolt System 83 Mobile Choke
18 Safety Retaining Screw 51 Lock 84 Pistol Grip
19 Safety Detent 52 Firing Pin Return Spring 85 Washer
20 Safety Spring 53 Firing Pin 86 M6 Screw
21 M4 Screw 54 Firing Pin Retaining Pin 87 Pistol Grip Cap
22 Bolt Catch 55 Extractor Spring 88 Pistol Grip Cap Screw
23 Bolt Catch Spring 56 Extractor Spring Pin 89 Stock
24 Bolt Catch Pin 57 Extractor 90 Cheek Piece Housing
25 Magazine Catch 58 Extractor Spring Pin 91 Cheek Piece Housing
26 Magazine Catch Spring 59 Cocking Handle 92 Adjustable Cheek Piece
27 Magazine Catch Button 60 Barrel with Barrel Extension 93 Cheek Piece Adjuster
28 Magazine Catch Screw 61 M8 Screw 94 Cheek Piece Fiber Nut
29 M6 Screw 62 M8 Screw 95 Cheek Piece Nut
30 Takedown Pin 63 Slide With Slide Extension 96 Magazine
31 Extractor Spring Pin 64 Gas Piston 97 Magazine Follower
32 Extractor Spring 65 Gas Block 98 Magazine Follower Extractor Spring
33 M4 Screw 66 Gas Block O-Ring 99 Magazine Follower Extractor

10
MK-20 MAG FED SHOTGUN

78 80
77
44 69

45 70 72 73 81
40 79
39 82
38
71
61 60 75
34

35 21
62 76 74
36
20
51
89 19 14 50
17
18 49
92
58
33 53
37 16 15 52
32 55 56
54 83
57
31
30 41 48
42 47
93
65
1 66
67
46 68
84 43 59
85 63
90 86 64
25
91 87
94
95 88
29 26
8 96
27
28 12
13
11 100
4 6
9
97 98
10
3

22
99

5 23
7 101
2

24

102

103

11
 BULLPUP DISASSEMBLY OF THE FIREARM
1) Make sure the firearm is in the safe 4) Turn the lever in arrow direction. 7) Remove the cover/forend by sliding 10) Remove the barrel by pulling in arrow
position. the barrel in arrow direction. direction. At this stage you can clean or
5) Remove the mag tube cover. replace the gas piston.
2) Remove the magazine by pushing the 8) Unscrew the barrel retaining nut.
magazine release button. 6) Slide the cover towards in arrow 11) Remove the recoil pad with a sharp
direction. Make sure the safety is not 9) Hold the pistol grip. Push the latch to object. At this stage you can add or
3) Pull the charging handle in arrow blocking the cover. release the bolt and getting the barrel remove extensions.
direction and lock it in that position by loose.
pushing the latch. 12) Remove the screws and add or
replace extensions to the recoil pad.

1 4 7 10

2 5 8 11

3 6 9 12

12
 BULLPUP ASSEMBLY OF THE FIREARM

1) Pull the bolt assembly slightly 3) Mount the gas tube cap by screwing
backwards and place the gas block on it on.
the gas tube. BufferBolt® System
4) Turn the lever to its initial position. The Specially developed system to avoid
2) Once the barrel is set slowly release firearm will not work properly if you skip damages in the receiver caused by recoil. Light Loads Piston: Heavy Loads Piston:
the assembly to its position. this step. Patented by DERYA® 2¾” Shotshells 3” Shotshells (Magnum)

1 3

2 4

13
BULLPUP BASIC PARTS
P.NO PART NAME P.NO PART NAME P.NO PART NAME P.NO PART NAME
1 Lower Receiver 34 Cartridge Ramp Spring 67 Gas Block Discharge Shell Pin 100 Magazine Follower
2 Rear Trigger 35 Cartridge Ramp Ball 68 Gas Block Discharge Shell Screw 101 Magazine Follower Extractor Spring
3 Disconnector Spring 36 Cartridge Ramp Slide 69 Magazine Tube Cover 102 Magazine Follower Extractor
4 Disconnector 37 Cartridge Ramp Screw 70 Frame Connector Rubber 103 Magazine Spring
5 Trigger Spring 38 Upper Receiver 71 Frame Connector Washer 104 Magazine Base Plate Retainer
6 Trigger Slide 39 Ejector Cover 72 Washer 105 Magazine Base Plate
7 Trigger Pin 40 Ejector Cover Spring 73 M8 Screw
8 Crescent Washer 41 Ejector Cover Pin 74 Recoil Pad Extension
9 Front Trigger 42 Ejector Cover Screw 75 Recoil Pad Extension Screw
10 Front Trigger Spring 43 Cover Spring 76 Recoil Pad Button Spring
11 Front Trigger Pin 44 Magazine Tube 77 Recoil Pad Button
12 Hammer 45 Slide Carrier 78 Recoil Pad
13 Hammer Pin Sleeve Male 46 Main Spring 79 M4 Nut
14 Hammer Pin Sleeve Female 47 Slide With Slide Carrier 80 Cheekpad
15 Hammer Spring 48 Slide Carrier Spring 81 Cheekpad Screw
16 Hammer Pin 49 Slide Carrier Pin 82 Forend
17 Crescent Washer 50 Slide Carrier Fixing Pin 83 M4 Nut
18 Safety 51 Bolt 84 Side Rail
19 Left Safety Lever 52 Lock 85 M5 Screw
20 Right Safety Lever 53 Buffer Bolt System 86 Charging Handle Assembly
21 M4 Screw 54 Firing Pin Spring 87 Grip
22 M4 Screw 55 Firing Pin 88 Forend Retainer
23 Safety Detent 56 Firing Pin Fragment 89 Top Rail
24 Safety Spring 57 Extractor Spring 90 Top Rail Pin
25 M4 Screw 58 Extractor Spring Pin 91 Flip Up Sight (Rear)
26 Bolt Stopper 59 Extractor 92 Flip Up Sight M5 Nut
27 Magazine Lock Latch 60 Extractor Pin 93 Flip Up Sight M5 Screw
28 Magazine Lock 61 Gas Piston 94 Flip Up Sight (Front)
29 Magazine Lock Spring 62 Gas Piston Fragment 95 Sling Swivel Docking
30 Magazine Lock Button 63 Barrel Assembly 96 Sling Swivel Docking Screw
31 Magazine Lock Screw 64 Gas Block O-Ring 97 Forend Nut
32 Upper Connector Pin 65 Gas Block Discharge Shell 98 Mobile Choke
33 Cartridge Ramp 66 Gas Block Discharge Shell Spring 99 Magazine

14
BULLPUP MAG FED SHOTGUN

91
92
93
81 89 94 92
80

90 93

79

63
38 53

78 75 96
74 95 52
55
60
43 54
39 56 51
58
64
73 71 70 59
40
57
41
44 50
42 47
48
72 32 49
76 61
25 62 98
4 18
77 66
3 24 67
46
8 23 69
21
7
19 45
5 65
6 2 22 20
82 68

27 26 96
29 95
30
1
31

28
10
87
11 9
36
99 83
34 97
12
100 101
33 102 85
35 16 84
37 15 86
13 103
14 104 88
17 105

15
 PUMP MAG FED DISASSEMBLY / LOADING OF THE FIREARM

1) Pull the forend backwards to bring the 4) Unscrew the tube cap shroud by 1) Turn the safety button to safe position. 4) Push the side button and cock the
bolt to it’s position. turning in arrow direction. firearm by pulling the forend back and
2) Remove the magazine. forwards.
2) Push the detaching pin and pull from 5) Pull the barrel in arrow direction.
the other side until it sets. 3) Load cartridges into the magazine
6) Then remove the bolt group by sliding until it reaches its capacity.
3) Detach receiver from the trigger guard. it to the front.

1 4 1 4

BufferBolt® System
Specially developed system to avoid
damages in the receiver caused by recoil.
2 5 2 Patented by DERYA®

3 6 3

16
PUMP MAG FED BASIC PARTS
P.NO PART NAME P.NO PART NAME P.NO PART NAME
1 Trigger Guard 34 Main Tube 67 Magazine Spring
2 Safety 35 Slide Carrier 68 Magazine Base Plate Retainer
3 Safety Ball 36 Slide Carrier Pin Spring 69 Magazine Base Plate
4 Safety Spring 37 Slide Carrier Pin 70 Mobile Choke
5 Safety Pin 38 Slide Carrier Fixing Pin 71 Ejector Spring (Optional)
6 Trigger Spring 39 Forend 72 Ejector (Optional)
7 Ø7 Ball 40 Bolt 73 Ejector Screw (Optional)
8 Trigger 41 Buffer Bolt System
9 Disconnector Spring 42 Lock
10 Disconnector Ball 43 Firing Pin Spring
11 Disconnector 44 Firing Pin
12 Trigger Pin 45 Firing Pin Pin
13 Hammer Spring 46 Extractor Spring
14 Hammer Ball 47 Extractor Spring Pin
15 Hammer 48 Extractor
16 Side Button 49 Extractor Pin
17 Hammer Pin 50 Barrel With Barrel Extension, Gas Block and Sight
18 Crescent Washer 51 Heat Cage
19 Side Button Spring 52 Heat Cage Screw
20 Magazine Lock 53 Main Tube Cap
21 Magazine Lock Spring 54 Sling Swiwel Washer
22 Magazine Lock Button 55 Sling Swiwel Nut
23 Magazine Lock Screw 56 Sling Swiwel
24 Upper Receiver 57 Stock
25 Top Rail 58 Cheekpad
26 Top Rail Short Screw 59 Cheekpad Nut
27 Top Rail Long Screw 60 Cheekpad Screw
28 Sight Lower Spring 61 Recoil Pad Extension
29 Sight Body 62 Recoil Pad
30 Sight Assembly Screw 63 Sling Swivel
31 Extractor Spring 64 Stock Screw
32 Extractor Pin 65 Magazine
33 Takedown Pin 66 Magazine Follower

17
PUMP MAG FED SHOTGUN

30 73
52
58 27
62 29 26 72
61 71
51 52
28
59
64
41
44
25 43 42
31
32 49
24 40 46
47
45 48
50
60
63 57 33
35

38
4 7 15 39 70
6 18 36
3 34 37

5 17

2
8
11
13 14
12

19
9 16 1 55
10 54
53 56

65
20
21
22
23
66

67

68

69

18
 SEMI AUTOMATIC DISASSEMBLY / LOADING OF THE FIREARM

1) Activate the safety by pushing the 4) Remove the barrel by pushing in arrow 7) Remove the charging handle by 1) Push the magazine latch to the marked
button. direction, while pulling the charging pulling in arrow direction. position to enable the chamber feeding
handle. of loaded shells from the magazine tube.
8) Remove the bolt assembly by pulling If the latch is shut, only one shell at a time
2) Unscrew the nut/cap in arrow will be fed to the chamber.
5) Bring the handle in parralel position in arrow direction.
direction. with the locking hole of the charging
handle. 9) At this stage you can change the gas 2) Fill the magazine tube with proper
3) Push the forend in arrow direction. pistons. Heavy and light shell pistons cartridges.
6) Hold tight the bolt assembly to are located on the magazine tube and 3) Load the firearm by cocking the
remove the charging handle. marked as such. charging handle.

1 4 7 1

2 5 8 2

3 6 9 3

19
SEMI AUTOMATIC BASIC PARTS
P.NO PART NAME P.NO PART NAME P.NO PART NAME
1 Trigger Assembly 34 Bolt Release Button Pin 67 Magazine Tube Cap
2 Hammer Spring 35 Slotted Spring Pin 68 Sling Washer
3 Hammer Spring Socket 36 Magazine Tube Latch Rivet 69 Sling Nut
4 Hammer 37 Magazine Tube Latch 70 Stud
5 Hammer Pin 38 Magazine Tube Latch Pin 71 Receiver Pins
6 Safety 39 Magazine Tube Latch Spring 72 Buttstock Bolt (Optional)
7 Safety Socket 40 M4 Screw 73 Buttstock (Variable)
8 Safety Spring 41 Main Spring 74 Buttstock Washer
9 Safety Pin 42 Slide + Slide Carrier 75 Buttstock Spring Washer
10 7 Socket 43 Pin Spring 76 Buttstock Screw
11 D Segment 44 Pin 77 Recoil Pad
12 Trigger Spring 45 Connection Pin 78 Recoil Pad Screw
13 Trigger 46 Ø4 Ball 79 Stud
14 Disconnector Spring 47 Ball Spring 80 Mobile Choke
15 Disconnector Socket 48 Retainer Pin
16 Disconnector 49 Heavy Loads Piston
17 Trigger Pin 50 Light Loads Piston
18 Carrier Latch Spring 51 Light Loads Piston Ring
19 Carrier Latch Socket 52 Light Loads Piston Oring
20 Carrier 53 Bolt
21 Carrier Latch 54 Lock
22 Carrier Latch Pin 55 Firing Pin Spring
23 7 Socket 56 Firing Pin
24 D Segment 57 Firing Pin Pin
25 Magazine Tube 58 Extractor Spring
26 Front Plug 59 Extractor Pin
27 Magazine Spring 60 Extractor
28 Rear Plug 61 Extractor Fixing Pin
29 Receiver 62 Charging Handle
30 Carrier Latch Frame 63 Barrel+Barrel Extension+Barrel Rail+Sight+Gas Block
31 Carrier Latch Rivet Spring 64 Gas Block Oring
32 Bolt Release Button Spring 65 Forend
33 Bolt Release Button 66 Forend Tube

20
 SEMI AUTOMATIC SHOTGUN

75 74 72 56
55 54
76
77

63
53
57
47
78 61
29 46 58
59 60
48 42
64
49
62 45
73 43 50
71 44 51
30 52
79
31
28

32
33
41 80
34 37

10 11 35 27
12
9 1
18 36 40
8 26
39
7 19
38 25
6 69 68
5 67
13
16 70
17
24
23
2 3 4 65
14 15

66
22 21
20

21
 PUMP ACTION DISASSEMBLY OF THE FIREARM / SETTINGS AG PUMP ACTION DISASSEMBLY OF THE FIREARM / SETTINGS

1) Remove the magazine cap. 1) Push the safety button to SAFE 1) Remove the magazine cap. 1) Push the safety button to SAFE
position. position.
2) Open the action slightly then push the 2) Open the action slightly then push the
barrel forward and of the receiver. 2) Load cardridges into the tube until it barrel forward and of the receiver. 2) Load cardridges into the tube until it
reaches its capacity. reaches its capacity.
3) Now you can remove the bolt group, 3) Now you can remove the bolt group,
by sliding it to the front. 3) Push the relase latch and cock the by sliding it to the front. 3) Push the relase latch and cock the
firearm by pulling the forend. firearm by pulling the forend.

1 1 1 1

2 2 2 2

3 3 3 3

22
PUMP ACTION BASIC PARTS
P.NO PART NAME P.NO PART NAME P.NO PART NAME
1 Trigger Guard 34 Follower Tube Spring 67 M4 Screws (Optional)
2 Hammer Spring 35 Follower Tube 68 M4 Screws (Optional)
3 Hammer Socket 36 Slotted Spring Pin
4 Hammer 37 Slide Carrier Note: Some models will vary from exploded view.
5 Hammer Pin 38 Pin
6 Safety 39 Pin Spring *Barrel with Barrel Extension, Ejector, Gas Block and Fiber
7 Safety Socket 40 M4 Screw Optic Sight
8 Safety Spring 41 Forend
9 Safety Pin 42 Bolt
10 7 Socket 43 Lock
11 D Segment 44 Firing Pin Spring
12 Trigger 45 Firing Pin
13 Trigger Spring 46 Firing Pin Pin
14 Disconnector Spring 47 Extractor Spring
15 Disconnector 48 Extractor Pin
16 Trigger Pin 49 Extractor
17 Side Button 50 Extractor Fixing Pin
18 Ejector Spring 51 Barrel Assembly*
19 Carrier Latch Spring 52 Magazine Tube Cap
20 Carrier Latch Socket 53 Sling Swivel Washer
21 Carrier 54 M5 Nut
22 Carrier Latch 55 Sling Swivel M5 Screw
23 Carrier Latch Pin 56 Takedown Pin
24 7 Socket 57 Stock
25 D Segment 58 Stock Connection Washer
26 Magazine Tube 59 Stock Bolt
27 Front Plug 60 Recoil Pad
28 Magazine Spring 61 Recoil Pad Screw
29 Rear Plug 62 Sling Swivel Screw
30 Receiver 63 Mobile Choke (Optional)
31 Ejector Tube 64 Handguard Pivot Nut (Optional)
32 Bolt Button Spring 65 Handguard Pivot Nut Screw (Optional)
33 Slotted Spring Pin 66 Heat Shield (Optional)

23
 PUMP ACTION SHOTGUN

66
68

60
59 67

61 58
51

45
44
43
63
42
30 48
46 49
64 50

62 57 47
56
34 37
31 35 65 41
32 36 40

11 29 39 38
33 10
9 20
1 5
8 19
17 28
7
27
6 25
24
12 22
15 18 53
26
16 2 3
4
14 13 23
21 54
52
55

24
AG PUMP ACTION BASIC PARTS
P.NO PART NAME P.NO PART NAME P.NO PART NAME
1 Trigger Guard 34 Follower Tube Spring 67 Recoil Pad
2 Hammer Spring 35 Follower Tube 68 Sling Swivel
3 Hammer Socket 36 Slotted Spring Pin 69 Recoil Pad Screw
4 Hammer 37 Slide Carrier 70 Mobile Choke
5 Hammer Pin 38 Pin 71 Bead Sight
6 Safety 39 Pin Spring
7 Safety Socket 40 M4 Screw Note: Some models will vary from exploded view.
8 Safety Spring 41 Slide Extension
9 Safety Pin 42 Slide Extension Ring *Barrel with Barrel Extension, Ejector, Gas Block and Bead
10 7 Socket 43 Forend Sight
11 D Segment 44 Slide Extension Nut
12 Trigger 45 Bolt
13 Trigger Spring 46 Lock
14 Disconnector Spring 47 Firing Pin Spring
15 Disconnector 48 Firing Pin
16 Trigger Pin 49 Firing Pin Pin
17 Side Button 50 Extractor Spring
18 Ejector Spring 51 Extractor Pin
19 Carrier Latch Spring 52 Extractor
20 Carrier Latch Socket 53 Extractor Fixing Pin
21 Carrier 54 Barrel Assembly*
22 Carrier Latch 55 Magazine Tube Cap
23 Carrier Latch Pin 56 Sling Swivel Washer
24 7 Socket 57 M5 Nut
25 D Segment 58 Sling Swivel M5 Screw
26 Magazine Tube 59 Magazine Tube Cap Sling Swivel
27 Front Plug 60 Sling Swivel Rivet
28 Magazine Spring 61 Takedown Pin
29 Rear Plug 62 Stock
30 Receiver 63 Cheekpad
31 Ejector Tube 64 Cheekpad Nut
32 Bolt Button Spring 65 Cheekpad Screw
33 Slotted Spring Pin 66 Recoil Pad Extension

25
 AG PUMP ACTION SHOTGUN

63

67 66

54 71
65
69
30 48 46
62
47

45
50
70
49
52
64 53 51
35 37
68 61 29
34 42
31 40 41
32 36
39 38 43
33 11
9 10 19
5
8 44
7 17 28
20 27
12 6 24
15 25
1 22
13 18 26 57
55
16
2 3 4 59

14 23 56
21 58

60

26
 06/2021
Derya Silah San.Ltd. +90 332 514 8118 [email protected] www.deryaarms.com
O.S.B. 41959 Sk.
No:24/1 42700
Konya/Turkey