Translated from Chinese (Simplified) to English - www.onlinedoctranslator.

com

SW6206
Five-port multi-protocol two-way fast charging mobile power solution supporting PD

supportPDFive-port multi-protocol two-way fast charging mobile power solution

1.overview

SW6206It is a highly integrated multi-protocol two-way fast charging mobile power dedicated all-in-one chip, supportingA+A+B+C+L Any port

for fast charging. which integrates5AHigh efficiency switching charging,22.5WEfficient synchronous boost output, PPS/PD/QC/AFC/FCP/SCP/PE/

SFCPand other fast charging protocols, power metering,ledLight display and corresponding control management logic. Only a small number of

peripheral components are needed to form a complete high-performance bidirectional fast charging mobile power solution.

2.Application field

• mobile power

• Other battery powered equipment

3.Specification

• switch charging • Type-Cinterface

➢ Current up to5A, the efficiency is as high as96%
➢ built-inUSB Type-Cinterface logic

➢ support4.2/4.35/4.4/4.5VBattery Type
➢ supportTry. SRCFunction

➢ supportJEITAspecification • BC1.2module
➢ Support temperature loop control
➢ supportBC1.2 DCPmodel

• synchronous boost
➢ Support Apple/Samsung mode

➢ output power up to22.5W, the efficiency is as high as95% • Lightningdecrypt

➢ Automatic Load Detection/Light Load Detection ➢ built-inLightningdecryption function
➢ Support wireless charging mode • Power metering and display
➢ Support low current mode ➢ built-in12bit ADC
• Output fast charging protocol ➢ Built-in coulomb meter for accurate power

➢ supportPPS/PD3.0/PD2.0 ➢ support3-5indivualledlight display

➢ supportQC4+/QC4/QC3.0/QC2.0 • Fast charge indicator

➢ supportAFC ➢ Built-in fast charging indicator driver

➢ supportFCP • lighting driver

➢ supportSCP ➢ built-in lightingleddrive
➢ supportPE2.0/PE1.1
• button
➢ supportSFCP
➢ Support mechanical keys

• Enter the fast charging protocol

• protection mechanism

➢ supportPD3.0/PD2.0
➢ Input Overvoltage Protection

➢ supportAFC
➢ Output overcurrent/short circuit protection

➢ supportFCP
➢ Charging overtime/overvoltage protection

➢ supportSCP
➢ temperature protection

➢ supportPE1.1
• I2Cinterface
• QFN-48(6x6mm)encapsulation
Copyright © 2022, ZHUHAI ISMARTWARE TECHNOLOGY CO., LTD. May, 2022 - DS035_v1.5

No. -1 -total pagestwenty threePage

 SW6206
Five-port multi-protocol two-way fast charging mobile power solution supporting PD

4.Functional block diagram

VBUSL VOUTC VBUSC VOUTA2 VBUSA2

VBUS VBUS VBUS
DATA CC1 DMA2
DATA CC1 DM
CCL/WLED 10uF 10uF CC2 10uFDPA2
CC CC2 DP
DMC
GND DM GND
GATEL GATEC DPC GATEA2
DP
Port-L Type-A2
GND
Type-C
VBUSB VOUTP VOUTA1 VBUSA1
VBUS VBUS
DMB DMA1
DM DM
DPB 10uF 10uFDPA1
DP DP
GND GND
GATEB GATEA1

VOUTA1
VOUTA2
VBUSA1
VBUSA2
GATEA1
GATEA2

VOUTC
VBUSB
VBUSC
GATEB
GATEC

VBUSL
GATEL
Micro-B Type-A1

5mΩ
VOUT VOUTP
Power Path Controller
22uF 22uF 22uF 22uF

0.1uF

VOUTSN
LED1/SCK LED1/SCK VOUTSP
BST
LED1/SCK LED5 LED3
LED2/SDA LED1
MCU LED4 LED2 0.1uF
LED3/IRQ led power
2.2uH
LED2/SDA LED2/SDA
driver control
LED4/I2C SW VBAT
LED3/IRQ LED3/IRQ
Or Module
I2C 22uF 22uF
LED4/I2C LED4/I2C

Rcset
CSET
BAT
NTC

VCC VCC internal

power DPA1 DPA1
22uF DMA1 DMA1
DPA2 DPA2
DMA2 DMA2
FLED/BSET DPB DPB
FLED/BSET fast
2K FLED DMB DMB
charge DPC DPC
Protocol DMC DMC
CC1 CC1
Rbset
CC2 CC2
VCC KEY/GSET CCL/WLED CCL/WLED
KEY/GSET
DATA DATA
Rgset
PUSH KEY EPAD

Copyright © 2022, ZHUHAI ISMARTWARE TECHNOLOGY CO., LTD. May, 2022 - DS035_v1.5

No. -2 -total pagestwenty threePage

 SW6206
Five-port multi-protocol two-way fast charging mobile power solution supporting PD

5.Pin definition and function description

5.1.pin definition

CCL/WLED
48 DMA2

46 DMA1
47 DPA1

44 DMB

42 DMC

GATEB
GATEC
45 DPB

43 DPC

41 CC1

40 CC2

39

38

37
DPA2 1 36 GATEA1

SW 2 35 GATEA2

SW 3 34 GATEL

SW 4 33 VOUT

SW 5 32 VOUT

SW6206
SW 6 31 VOUT

BST 7 30 VOUT

DATA 8 29 VOUT

VOUTA1 9 28 VOUTSN

VBUSA1 10 27 VOUTSP

VBUSB 11 26 LED1/SCK
EPAD
VBUSC 12 25 LED2/SDA
twenty three

twenty four
twenty two
twenty one
13

14

15

16

17

18

19

20

CSET
NTC
BAT

VCC
VOUTC

LDE3/IRQ
VOUTA2

VBUSL
VBUSA2

KEY/GSET

LED4/I2C
FLED/BSET

5.2.Pin description

Pin name Function Description

1 DPA2 Type-A2mouthDPpin.
2, 3, 4, 5, 6 SW switch node.
7 BST superiorNtube driveBootstrappin.

8 DATA LightningmouthDATApin.
9 VOUTA1 Type-A1Port light load current sense pin.

10 VBUSA1 Type-A1Port output voltage detection pin.

11 VBUSB Micro-BPort input voltage detection pin.

C opyright © 2022, ZHUHAI ISMARTWARE TECHNOLOGY CO., LTD. May, 2022 - DS035_v1.5

No. -3 -total pagestwenty threePage

 SW6206
Five-port multi-protocol two-way fast charging mobile power solution supporting PD

12 VBUSC Type-CPort input and output voltage detection pin.

13 VOUTC Type-CPort light load current sense pin.

14 VOUTA2 Type-A2Port light load current sense pin.

15 VBUSA2 Type-A2Port output voltage detection pin.

16 VBUSL LightningPort input voltage detection pin.

17 BAT Battery voltage detection pin.

18 NTC Battery temperature detection pin.

19 VCC Internal working power supply.

20 KEY/GSET Mechanical button input, fuel meter constant current charging time parameter setting.

twenty one FLED/BSET Fast charge indication, battery target voltage setting.

twenty two CSET Battery capacity setting.

twenty three LED4/I2C ledlight interface4,andI2CSet the signal.

twenty four LED3/IRQ ledlight interface3, can be multiplexed as an interrupt signal.

25 LED2/SDA ledlight interface2, which can be reused asI2Cdata signal.

26 LED1/SCK ledlight interface1, which can be reused asI2Cclock signal.

27 VOUTSP Input and output current sense positive terminal.

28 VOUTSN Input and output current sense negative terminal.

29, 30, 31, Charging circuit input, boost circuit output pin.
VOUT
32, 33

34 GATEL LightningOral access control.

35 GATEA2 Type-A2Oral access control.

36 GATEA1 Type-A1Oral access control.

37 GATEB Micro-BOral access control.

38 GATEC Type-COral access control.

39 CCL/WLED LightningmouthCCpin, configurable as an illumination output.

40 CC2 Type-Cconfigure channel2.

41 CC1 Type-Cconfigure channel1.

42 DMC Type-CmouthDMpin.
43 DPC Type-CmouthDPpin.
44 DMB Micro-BmouthDMpin.
45 DPB Micro-BmouthDPpin.
46 DMA1 Type-A1mouthDMpin.
47 DPA1 Type-A1mouthDPpin.
48 DMA2 Type-A2mouthDMpin.
EPAD coolingPAD, to ground.

Copyright © 2022, ZHUHAI ISMARTWARE TECHNOLOGY CO., LTD. May, 2022 - DS035_v1.5

No. -4 -total pagestwenty threePage

 SW6206
Five-port multi-protocol two-way fast charging mobile power solution supporting PD

6.Limit parameter

Parameters Symbol MIN MAX UNIT

Input voltage VBUSB/VBUSC/VBUSL - 0.3 16 V
VOUT/VOUTSP/VOUTSN/
The output voltage VOUTA1/VOUTA2/VOUTC/ - 0.3 16 V
VBUSA1/VBUSA2/VBUSC
SWpin voltage SW - 0.3 16 V
BSTpin voltage BST-SW - 0.3 6 V
GATEA1/GATEA2/GATEB/
access control voltage - 0.3 twenty one V
GATEC/GATEL
CC1/CC2/CCLpin
CC1/CC2/CCL - 0.3 16 V
Voltage

Other pin voltage - 0.3 6 V

junction temperature - 40 + 150 °C
storage temperature - 60 + 150 °C
ESD(HBM) -4 +4 KV

【Remarks】Conditions such as voltage, current and temperature exceeding this range may cause permanent damage to the device.

7.Recommended parameters

Parameters Symbol MIN Typical MAX UNIT

Input voltage VBUSB/VBUSC/VBUSL 4.5 13.5 V
battery voltage BAT 2.8 4.5 V

8.electrical characteristics

(VIN= 5V,VBAT= 3.7V, TA= 25°C,Unless otherwise specified. )

Parameters Symbol Test Conditions MIN TYP MAX UNIT

Power supply

VBUSB/VBUSC/VBUSL
VBUSB/C/L VBUSB/VBUSC/VBUSL 4 13.5 V
input power

VBUSB/VBUSC/VBUSL VBUSB/VBUSC/VBUSL
VBUSB/C/L_UVLO 3.9 4 4.1 V
Input Undervoltage Threshold Input voltage drop

VBUSB/VBUSC/VBUSL VBUSB/C/L_UVLO_ VBUSB/VBUSC/VBUSL

300 400 500 mV
Input Undervoltage Threshold Hysteresis HYS Input voltage rises

Copyright © 2022, ZHUHAI ISMARTWARE TECHNOLOGY CO., LTD. May, 2022 - DS035_v1.5

No. -5 -total pagestwenty threePage

 SW6206
Five-port multi-protocol two-way fast charging mobile power solution supporting PD

VBUSB/VBUSC/VBUSL VBUSB/VBUSC/VBUSL
VBUSB/C/L_OVP 13.4 13.7 14 V
Input Overvoltage Threshold Input voltage rises

VBUSB/VBUSC/VBUSL VBUSB/C/L_OVP_ VBUSB/VBUSC/VBUSL

mV
600 8001000
Input Overvoltage Threshold Hysteresis HYS Input voltage drop

BoostorVBUSB/VBUSC/VBUSLcatch
4.9 5 5.1 V
VCCThe output voltage VCC enter

shutdown VBAT V
BoostorVBUSB/VBUSC/VBUSLcatch
40 60 80 mA
VCCOutput current ICC enter

shutdown 40 60 80 mA
Internal resistance of power tube

NMOStop tube RDSON_H 17 20 twenty four mΩ

NMOSdown tube RDSON_L 9 11 14 mΩ

NMOSUpper tube peak current limit IPEAK_H charging mode 6 8 10 A

NMOSLower leg peak current limit IPEAK_L boost mode 8 10 12 A

charging mode

Trickle cut-off voltage VTC 2.9 3 3.1 V

VBAT< 0.5V 30 60 100 mA

Trickle charge current (battery terminal current ) ITC
0.5V<VBAT< 3V 200 300 400 mA

VBUSB/VBUSL= 5V,ICCSET=2A 1.8 2 2.1 A

VBUSC= 5V,ICCSET=3A 2.7 3 3.2 A

ICC VBUSB/VBUSC/VBUSL= 9V,

Constant charging current
1.8 2 2.1 A
ICCSET=2A

VBUSB/VBUSC/VBUSL=12V,
1.3 1.5 1.6 A
ICCSET=1.5A

VBUSB/VBUSC/VBUSL= 5V 200 230 260 mA

cut-off charging current IEND VBUSB/VBUSC/VBUSL= 9V 100 130 160 mA

VBUSB/VBUSC/VBUSL= 12V 80 100 120 mA

Charging target voltage VBAT_FULL 4.16 4.2 4.24 V

Recharge voltage VBAT_RECH 4.06 4.1 4.14 V

On-off level fCHG 350 400 450KHz

Trickle charge timeout tTC_OT 36 40 44 Min

Constant current and constant voltage charging timeout tCC_OT 30 33 36 hours

constant temperature value TREGU_CHG 100 115 130 ℃

Copyright © 2022, ZHUHAI ISMARTWARE TECHNOLOGY CO., LTD. May, 2022 - DS035_v1.5

No. -6 -total pagestwenty threePage

 SW6206
Five-port multi-protocol two-way fast charging mobile power solution supporting PD

VBUSB/VBUSC/VBUSL= 5V 4.4 4.5 4.6 V

Pressure limiter threshold VHOLD VBUSB/VBUSC/VBUSL= 9V 8.4 8.5 8.6 V

VBUSB/VBUSC/VBUSL= 12V 11.35 11.45 11.55 V

boost mode

VBATInput voltage VBAT 2.9 4.5 V

VBATInput Undervoltage Threshold VBAT_UVLO VBATInput voltage drop 2.8 2.9 3.0 V

VBATInput Undervoltage Threshold Hysteresis VBAT_UVLO_HYS VBATInput voltage rises 400 500 600 mV

Vout=5V, Iout=0A 5 5.1 5.2 V

VOUTThe output voltage Vout Vout=9V, Iout=0A 8.9 9.1 9.3 V

Vout=12V, Iout=0A 11.8 12.1 12.4 V

Vout=5V, IOUTSET=3A 3 3.4 A

Full load output current Iout Vout=9V,IOUTSET=2A 2 2.3 A

Vout=12V, IOUTSET=1.5A 1.5 1.8 A

RDS_PATH=10mΩ, Vout=5V 40 60 80 mA
Light load current detection threshold ILIGHT_LOAD
RDS_PATH=10mΩ, Vout=9V/12V 20 40 60 mA

single port output 28 32 40 S

Light load detection shutdown time tLIGHT_LOAD
Multi-port output or discharge while charging 12 16 20 S

Quiescent Current IQ VBAT=3.7V 40 50 65 uA

0A<Iout<1A 0 mV

Line Loss Compensation VOUT_WDC 1A<Iout<2A 30 50 70 mV

Iout>2A 80 100 120 mV

On-off level fBST 350 400 450KHz

Thermal Control Loop Threshold TREGU_BST 100 115 130 ℃

Type-Cinterface

CCPin output current ICC_SOURCE Power Level=3.0A 310 330 350 uA

CCPin Termination Resistor RD. 4.9 5.1 5.3 kΩ

BC1.2

DP Apple 2.4A Mode 2.55 2.7 2.85 V

DP/DMVoltage
DM Apple 2.4A Mode 2.55 2.7 2.85 V

PE

current threshold IREF 150 250 350 mA

Copyright © 2022, ZHUHAI ISMARTWARE TECHNOLOGY CO., LTD. May, 2022 - DS035_v1.5

No. -7 -total pagestwenty threePage

 SW6206
Five-port multi-protocol two-way fast charging mobile power solution supporting PD

exit time tPLUG_OUT 160 200 240 M

ledbattery indicator

battery indicatorleddrive current Iled 2 4 6 mA

ledFlashing frequency fled 0.8 1 1.2 Hz

ledillumination

WLEDresistance RWLED 10 20 30 Ω

KEY

short key TSHORT twenty four 32 500 M

Long key Tlong 1.5 2 3 S

double click TDOUBLE Maximum time between two short key presses 1.2 1.5 1.8 S

I2C

rate fCLK 100 400Kbit/S

Thermal Shutdown Protection

Thermal Shutdown Threshold TSHDT The temperature rises 135 150 165 ℃

Thermal Shutdown Hysteresis TSHDT_HYS Temperature drop 55 70 85 ℃

9.Functional description

9.1.charging mode

SW6206Integrates the highest efficiency up to96%A switch charging module that supports4.2V/4.35V/4.4V/4.5Vand other

battery types, switching frequency400KHz, you can use a small volume2.2uHinductance.

The charging process is divided into the following three processes: trickle mode, constant current mode, and constant voltage mode. When the battery voltage is lower than3VWhen ,

the charging module is in the trickle current mode, and the charging current is the trickle charging current; when the battery voltage is greater than3V, the charging module enters the

constant current mode and charges at full speed according to the set target current; when the battery voltage rises to the charging target voltage (such as4.2V), the charging module enters

the constant voltage mode, at this time the current gradually decreases, while the battery terminal voltage remains unchanged; when the charging current decreases to the charging cut-off

current, the charging ends. If the battery voltage drops below the target voltage after being fully charged0.1V, charging will restart automatically.

Copyright © 2022, ZHUHAI ISMARTWARE TECHNOLOGY CO., LTD. May, 2022 - DS035_v1.5

No. -8 -total pagestwenty threePage

 SW6206
Five-port multi-protocol two-way fast charging mobile power solution supporting PD

VBAT_FULL ICC

IEND
VTC ITC

Trickle CC cv
charge charge charge

The battery type can beFLED/BSET Pinset up. rightVCCpull up10KΩresistor, set the4.2Vbattery; right
VCCpull up15KΩresistor, set the4.35Vbattery; rightVCCpull up5.6KΩresistor, set the4.4Vbattery; right VCC
pull up3KΩresistor, set the4.5VBattery.

The constant current charging current is set according to the fast charging input voltage, which is the constant current at the input terminal, and the

maximum current at the battery terminal can reach5A. when in normal5Vinput voltage, forMicro-BandLightningport, the charging current is set to2A;forType-

C port, the charging current is set to3A; When in fast charge9Vinput voltage, the charging current is set to2A; When in fast charge12V input voltage, the

charging current is set to1.5A.

Charging module supportNTCprotection andJEITAspecification,NTCThe temperature protection module will always monitor the battery temperature, typically, make it

in0~50Charge within the normal temperature range of ℃. When the temperature is abnormal, reduce the charging current, lower the charging target voltage or turn off

charging. Typical application uses103AT NTCresistance, when the temperature is below5°C, the charging current is reduced by half, if the temperature continues to drop

below0℃, the charging is turned off, and the temperature rises to5℃, it will be recharged automatically, the charging current will be reduced by half, and the temperature

will continue to rise to10℃, restore the normal charging current. When the temperature is higher than45℃, the charging target voltage decreases0.1V, if the temperature

continues to rise above50℃, the charging is turned off, and the temperature drops to45Automatically recharge after ℃, the charging target voltage is lowered0.1V, the

temperature continues to drop to40℃, restore the normal charging target voltage.JEITASpecifications can be enabled or disabled as required.

The charging module also contains a temperature control loop, when the die temperature exceeds115°C, the charging current begins to drop, if the over-temperature continues to

exceed150℃, the chip enters the over-temperature shutdown mode.

The charging module also contains a timeout mechanism, when the constant current charging time exceeds33hours or trickle charging over40After 10 minutes, charging stops,

and this state can be released by plugging and unplugging the adapter.

9.2.boost mode

SW6206Integrated22.5Wof the boost module, the switching frequency400KHz, the highest efficiency can reach95%. The boost module

containsPSM/PWMBoth modes, under light load, work inPSMmode; under heavy load, work inPWMmodel. When the load is connected, the system

automatically detects and starts the booster module; when the load is removed, the system detects that after a certain period of time,

Copyright © 2022, ZHUHAI ISMARTWARE TECHNOLOGY CO., LTD. May, 2022 - DS035_v1.5

No. -9 -total pagestwenty threePage

 SW6206
Five-port multi-protocol two-way fast charging mobile power solution supporting PD

Turn off boost output.

Boost module supportCC/CVmodel. When the load current is less thanCCWhen the current is limited, the step-down circuit outputs the set voltage. When the load

reachesCCcurrent limit value, will limit the output current atCCcurrent limit value, the output voltage will drop. The output current limit value is configured according to the

output voltage, the higher the output voltage, the lower the current limit value.

Boost module supportNTCProtect,NTCThe protection module will monitor the battery temperature all the time, making it in-20~60Discharge within the normal

temperature range of ℃, and stop discharging when the temperature is abnormal. Typical application uses103AT NTCresistance, when the temperature is higher than 60

or below -20℃, stop discharging. After the discharge is stopped, even if the temperature returns to the normal temperature, the chip will not automatically start up, but

needs to detect the load insertion or short key action.

The boost module also contains a temperature control loop, when the die temperature exceeds115℃, the output voltage begins to drop; if the over-temperature

continues to exceed150℃, the chip enters the over-temperature shutdown mode. After entering the over-temperature shutdown mode, even if the temperature drops

below the over-temperature threshold, the chip will not automatically start up, but needs to detect load insertion or short key action.

The boost module includes protections such as input undervoltage/output overvoltage/output overload/output short circuit.

9.3.access control

SW6206supportType-A1+Type-A2+Micro-B+Type-C+Lightningfive of themType-A1andType-A2
supportQC3.0/QC2.0/AFC/FCP/SCP/PE2.0/PE1.1/SFCPfast charge output;Type-Csupport PPS/PD3.0/
PD2.0/QC4+/QC3.0/QC2.0/AFC/FCP/SCP/PE2.0/PE1.1/SFCPFast charge output, support PD3.0/PD2.0/
AFC/FCP/SCP/PE1.1fast charge input;Micro-BsupportAFC/FCP/SCP/PE1.1fast charge input; Lightning
supportPD3.0/PD2.0Fast charging input, and supports cable decryption.

Short key and load access can be openedType-A1/Type-A2The port discharges to the outside, and the light load detection will be closedType-A1/Type-A2/Type-C

Output port, the light load detection current threshold is related to the internal resistance of the access tube, and the internal resistance of the access tube10mΩhour,5V

The light load current corresponding to output and high voltage output is about60mA/40mA;DFPAccess can be openedType-Cport for charging,UFPaccess will openType-C

The port discharges externally, and the otherType-Cport supports light load detection, theUFPWhen the device is lightly loaded, it will also shut down Type-Cport, enter low

power consumption mode; adapter access can be openedMicro-B/Lightningport for charging.

SW6206Support charging while discharging. Support fast charging input and output when working with a single port, support when working with multiple ports5Vinput Output.

When charging while discharging, the power supply at the input port also discharges to the output port while charging the battery. The function of charging and discharging can be disabled

according to demand. When charging while discharging, the output port is given priority to discharge, and the threshold of the voltage limiting ring of the charging module is set to4.8V, when

the input port power is drawn by the output port device, if the input power supply is insufficient and the input voltage is lower than4.8VWhen , the charging module will reduce the charging

current so that the input port voltage remains at4.8V, the power supply of the input port gives priority to the power supply of the output port device.

SW6206supportType-A1/Type-A2/Type-CThe port discharges to the outside at the same time, and the output voltage at this time is5V.

9.4.mode setting

SW6206Supports wireless charging, low current and lighting drive modes. existI2CIn mode, three modes are set by registers.
existledIn display mode, three modes passPinset up.

Copyright © 2022, ZHUHAI ISMARTWARE TECHNOLOGY CO., LTD. May, 2022 - DS035_v1.5

No. -10 -total pagestwenty threePage

 SW6206
Five-port multi-protocol two-way fast charging mobile power solution supporting PD

SW6206Support wireless charging mode,Type-A2The port is connected to the wireless charging module, which is specially optimized for the power supply of the

wireless charging module, such as a short key to openType-A2mouth,5VOutput and high voltage output, the light load detection current is set to240mA/115mA, the

light load detection time is fixed at32S. Wireless charging mode throughLED1/SCK Pinsetting, to ground100KResistance, set to wireless charging mode; otherwise, set to

non-wireless charging mode.

SW6206Support low-current mode, which can charge low-current devices such as Bluetooth headsets and wristbands. After setting to low current mode,

long press to enter or exit low current mode. After entering the low current mode, the power display will also change, indicating that it is in the low current mode.

In low current mode, the2No light-load detection is performed within one hour, and the low-current mode can also be exited when double-clicking to shut

down. low current mode throughLED2/SDA Pinsetting, to ground100KResistor, set to low current mode; otherwise, set to non-small current mode.

SW6206Supports lighting drive mode.CCL/WLEDCan be configured as a lighting driver function orLightningMouthPDQuick

charge input function. Lighting drive mode viaLED3/IRQ Pinsetting, to ground100KResistor, set to lighting drive mode;
otherwise, set toLightningMouthPDFast charge input mode.

9.5. Type-Cinterface

SW6206IntegratedType-CThe interface controller not only supports bidirectional input and output, but also supportstry.SRCRole. When the adapter is connected, the

chip will automatically power on and charge; when the adapter is removed, it will automatically stop charging. When the electrical equipment is connected, the booster module

is turned on to work, and if the electrical equipment is unplugged, the booster module is automatically turned off.

When the electrical equipment is connected and the boost function is turned on,SW6206will be atCCbroadcast on pin3Acurrent

capability. if VBUSB/Lightningaccess, will also be inCCon the radio3Acurrent capability.

9.6. PDsfast charge

SW6206IntegratedPPS/PD3.0/PD2.0Fast charge protocol, support input and output two-way fast charge. Output
supports three gears configurableFIX PDOand two fixedAPDO. in5V FIX PDOcan be configured as5V:3A/2A/2.4A/2.5A;
9V FIX PDOcan be configured as9V:2A/2.22A/2.33A/2.4A;12V FIX PDOcan be configured as12V:1.5A/1.6A/1
.67A/1.75A. PPS0 APDOfor5.0~5.9V@3A;PPS1 APDOfor5.0~11V@2A. input support5V/9V/12VVoltage.

9.7. QC3.0/QC2.0fast charge

SW6206IntegratedQCFast charging protocol, supportQC4+/QC4/QC3.0/QC2.0,supportClass A.QC2.0support 5V/9V/

12VThe output voltage.QC3.0support5V~12VThe output voltage,200mV/Step.

QC2.0/QC3.0according toDP/DMThe corresponding output voltage of the voltage request is as follows:

access device SW6206

Copyright © 2022, ZHUHAI ISMARTWARE TECHNOLOGY CO., LTD. May, 2022 - DS035_v1.5

No. -11 -total pagestwenty threePage

 SW6206
Five-port multi-protocol two-way fast charging mobile power solution supporting PD

DP DM VOUT note

3.3V 3.3V keep the original voltage not responding

0.6V 0.6V 12V

3.3V 0.6V 9V

0.6V 3.3V continuous mode 0.2V/Step

0.6V GND 5V

9.8. AFCsfast charge

SW6206IntegratedAFCFast charging protocol, output support5V/9V/12V. input support5V/9VVoltage.

9.9. FCPsfast charge

SW6206IntegratedFCPFast charging protocol, support5V/9V/12VThe output voltage. input support5V/9VVoltage.

9.10. SCPsfast charge

SW6206IntegratedSCPFast charging protocol, output [email protected]. input support5.5V/3A.

9.11. PEfast charge

SW6206IntegratedPE2.0andPE1.1fast charge protocol,PE2.0support5V~12VThe output voltage,500mV/Step. PE1.1

support5V/7V/9V/12VThe output voltage. input support5V/9VVoltage.

9.12. SFCPsfast charge

SW6206IntegratedSFCPFast charging protocol, support5V/9V/12VThe output voltage.

Copyright © 2022, ZHUHAI ISMARTWARE TECHNOLOGY CO., LTD. May, 2022 - DS035_v1.5

No. -12 -total pagestwenty threePage

 SW6206
Five-port multi-protocol two-way fast charging mobile power solution supporting PD

9.13. BC1.2Function

SW6206containsUSBIntelligent adaptive function module, which not only supportsBC1.2Function, as well as the Chinese mobile phone charger standard,

can also be well compatible with Apple and Samsung's high-current output identification:

Apple 2.4A mode: DP=2.7V, DM=2.7V;

Samsung 2A mode: DP=1.2V, DM=1.2V;

9.14. LightningMouth decryption

SW6206supportLightningPort decryption function, support internal decryption or external decryption mode. When the internal decryption

mode is selected, theDATAdirect connectionLightningMouthDATA Pinterminal; when the external decryption mode is selected,DATAconnect directly

toVCC, and then use the external decryption chip toLightningMouth for decryption.

9.15.Power metering

SW6206Integrated high-precision power metering system, built-in coulomb counter, can accurately obtain battery power.

The fuel gauge supports battery capacity self-learning function, and the current battery capacity can be learned after a complete charging process.

The initial capacity of the battery can beCSET Pinresistance to ground setting. initial capacityCsetwith resistanceRcsetThe relationship is:

Rset=( Cset +2000 )*5/3

inCsetUnit ismAh,RsetThe unit is Ω.

The constant current charging time parameters of the fuel gauge can be passedKEY/GSETarriveVCCpull-up resistor setting.

9.16. ADCs

SW6206internally integrated12 bit ADC, can collectVOUTVoltage/IOUTcurrent/battery voltage/NTCVoltage.

Specifically:

ADCpath scope step

VOUTVoltage 0~16.384V 4mV

IOUTelectric current 0~9.309A 25/11mA

battery voltage 0~4.915V 1.2mV

Copyright © 2022, ZHUHAI ISMARTWARE TECHNOLOGY CO., LTD. May, 2022 - DS035_v1.5

No. -13 -total pagestwenty threePage

 SW6206
Five-port multi-protocol two-way fast charging mobile power solution supporting PD

NTCVoltage 0~4.505V 1.1mV

chip temperature - 100~200℃ 1/6.82℃

9.17. NTCsFunction

SW6206integratedNTCThe function can monitor the battery temperature in real time, and protect it when the temperature is

abnormal.NTC Pin By discharging a certain current toNTCresistor, then collect theNTCvoltage to calculate the current battery temperature.

NTCfunction support 103ATresistor, at low resistance values, the discharge80uA, to ensure the detection accuracy; when the resistance

is high, release40uA, to ensure the detection range. release by default80uAcurrent, inNTCvoltage higher than2.712V, switch to40uA

;release40uA atNTCvoltage below0.718V, switch to80uA.

use typical103ATResistance, discharge, protection threshold and correspondingNTCThe parameters are as follows:

Threshold description NTCtemperature/℃ NTCVoltage/V NTCCurrent/uA

dischargeNTClow temperature protection - 20 2.711 40

dischargeNTCHigh temperature constant temperature control 55 0.283 80

dischargeNTCHigh temperature protection 60 0.242 80

When charging, the protection threshold and correspondingNTCThe parameters are as follows:

Threshold description NTCtemperature/℃ NTCVoltage/V NTCCurrent/uA

ChargeNTClow temperature protection 0 2.182 80

ChargeNTC JEITALow temperature drop current 5 1.764 80

ChargeNTC JEITALow temperature recovery current 10 1.437 80

ChargeNTC JEITAHigh temperature recovery voltage 40 0.466 80

ChargeNTC JEITAHigh temperature voltage drop 45 0.393 80

ChargeNTCHigh temperature protection 50 0.333 80

In practical applications, the temperature range can be changed by means of series/parallel resistors. if not requiredNTCprotection function, the

Copyright © 2022, ZHUHAI ISMARTWARE TECHNOLOGY CO., LTD. May, 2022 - DS035_v1.5

No. -14 -total pagestwenty threePage

 SW6206
Five-port multi-protocol two-way fast charging mobile power solution supporting PD

NTC Pingrounded.

9.18. LEDslight display

SW6206supportledlight display.ledLamp driver support3~5lights, can automatically identifyledNumber of lights.

5In the light state, the connection method is as follows:

LED1/SCK
100K
LED1/SCK
LED5 LED3
LED1 wireless charging mode

LED4 LED2 led mold

100K
LED2/SDA
driver LED2/SDA Mode
Or
select
low current mode
LED3/IRQ
I2C
select

100K
LED4/I2C LED3/IRQ
Rcset CCL/WLED mode
CSET

5Under lamp discharge stateledInstruction table:

Capacity LED1 LED2 LED3 LED4 LED5

80~100% On On On On On
60~80% On On On On Off
40~60% On On On Off Off
20~40% On On Off Off Off
5~20% On Off Off Off Off
1~5% flicker Off Off Off Off
0% Off Off Off Off Off

5When the lamp is chargingledInstruction table:

Capacity LED1 LED2 LED3 LED4 LED5

100% On On On On On
80~99% On On On On flicker
60~80% On On On flicker Off
40~60% On On flicker Off Off
20~40% On flicker Off Off Off
0~20% flicker Off Off Off Off

4Connection method in light state:

Copyright © 2022, ZHUHAI ISMARTWARE TECHNOLOGY CO., LTD. May, 2022 - DS035_v1.5

No. -15 -total pagestwenty threePage

 SW6206
Five-port multi-protocol two-way fast charging mobile power solution supporting PD

LED1/SCK
100K
LED1/SCK
LED3
LED1 wireless charging mode

LED4 LED2 led mold

100K
LED2/SDA
driver LED2/SDA Mode
Or
select
low current mode
LED3/IRQ
I2C
select

100K
LED4/I2C LED3/IRQ
Rcset CCL/WLED mode
CSET

4Battery power indicator when the lamp is in discharge state:

Capacity LED1 LED2 LED3 LED4

75~100% On On On On
50~75% On On On Off
25~50% On On Off Off
5~25% On Off Off Off
1~5% flicker Off Off Off
0% Off Off Off Off

4Battery level indicator under charging status:

Capacity LED1 LED2 LED3 LED4

100% On On On On
75~99% On On On flicker
50~75% On On flicker Off
25~50% On flicker Off Off
0~25% flicker Off Off Off

3Connection method in light state:

LED1/SCK
100K
LED1/SCK
LED3
LED1
wireless charging mode

LED2 led mold

100K
LED2/SDA
driver LED2/SDA Mode
Or
select
low current mode
LED3/IRQ
I2C
select

100K
LED4/I2C LED3/IRQ

Rcset CCL/WLED mode

CSET

3Indicator table in lamp discharge state:

Copyright © 2022, ZHUHAI ISMARTWARE TECHNOLOGY CO., LTD. May, 2022 - DS035_v1.5

No. -16 -total pagestwenty threePage

 SW6206
Five-port multi-protocol two-way fast charging mobile power solution supporting PD

Capacity LED1 LED2 LED3

66~100% On On On
33~66% On On Off
5~33% On Off Off
1~5% flicker Off Off
0% Off Off Off

3Indication meter for lamp charging status:

Capacity LED1 LED2 LED3

100% On On On
66~99% On On flicker
33~66% On flicker Off
0~33% flicker Off Off

In low power state,LED1flashing5The system shuts down after this time.

Abnormal, such as output overcurrent, output short circuit, input overvoltage, chip overtemperature,NTCprotection etc. allledfull flash5The system shuts down after an

abnormality is displayed for the first time.

9.19.lighting driver

SW6206Integrated lighting insideledDrive, turn on and off by long pressing the button. lighting driver withLightning
Mouth CCLreuse, throughLED3/IRQ Pinset up.

9.20.Fast charge indicator

SW6206Internally integrated fast charging indicator driverFLED/BSET Pin, during fast charge input or output,FLED/BSETPull low to

turn on the fast charge indicator.

9.21.button

SW6206Support mechanical buttons, internal weak pull-up, support short press, long press and double click.

When short press action, openType-A1mouth and light loadType-CThe output port is used for external discharge and power display.

When the action is long pressed, the lighting driver is turned on or off; when in the low current mode, it enters or exits the low current mode.

On double click action, closeType-A1/Type-A2Mouth andType-COutput port, power display; if there is an external power supply,

Copyright © 2022, ZHUHAI ISMARTWARE TECHNOLOGY CO., LTD. May, 2022 - DS035_v1.5

No. -17 -total pagestwenty threePage

 SW6206
Five-port multi-protocol two-way fast charging mobile power solution supporting PD

Then only the output port is closed.

9.22. I2Cinterface

SW6206supportI2Cinterface, support100K/400Kcommunication rate.MasteraccessibleI2CThe interface reads the status information of

the chip.I2CThe interface is multiplexed with the power display module, when set toI2Cinterface, theLED4/I2Cgrounded. existI2CIn the mode, the

wireless charging, low current and lighting driving modes are set by registers.

LED1/SCK

LED2/SDA
MCU led
LED3/IRQ driver
Or
LED4/I2C I2C
Rcset
CSET

Read operation:

Slave address:0x3C
Register address:0xB0

Write operation:

Slave address:0x3C
Register address:0xB0

Copyright © 2022, ZHUHAI ISMARTWARE TECHNOLOGY CO., LTD. May, 2022 - DS035_v1.5

No. -18 -total pagestwenty threePage

 SW6206
Five-port multi-protocol two-way fast charging mobile power solution supporting PD

1ststep 2ndstep

SCL

wr ack ack

SDA S

3rdstep

SCL

SDA D7 D6 D5 D4 D3 D2 D1 D0ackP

Copyright © 2022, ZHUHAI ISMARTWARE TECHNOLOGY CO., LTD. May, 2022 - DS035_v1.5

No. -19 -total pagestwenty threePage

 SW6206
Five-port multi-protocol two-way fast charging mobile power solution supporting PD

10.Typical application circuit diagram

Copyright © 2022, ZHUHAI ISMARTWARE TECHNOLOGY CO., LTD. May, 2022 - DS035_v1.5

No. -20 -total pagestwenty threePage

 SW6206
Five-port multi-protocol two-way fast charging mobile power solution supporting PD

11.Mechanical Dimensions

11.1.Package diagram

11.2.package size

Dimension in Millimeters
Symbol
MIN NOM MAX
A 0.70 0.75 0.80
A1 - 0.02 0.05
b 0.15 0.20 0.25
c 0.18 0.20 0.23
D. 5.90 6.00 6.10
D2 4.10 4.20 4.30
e 0.40BSC
Ne 4.40BSC
Nd 4.40BSC
E. 5.90 6.00 6.10
E2 4.10 4.20 4.30
L 0.35 0.40 0.45
h 0.30 0.35 0.40

Copyright © 2022, ZHUHAI ISMARTWARE TECHNOLOGY CO., LTD. May, 2022 - DS035_v1.5

No. -twenty one -total pagestwenty threePage

 SW6206
Five-port multi-protocol two-way fast charging mobile power solution supporting PD

12.version history

V1.0 initial version;

V1.1 Modified some electrical characteristic parameters;

V1.2 Modified boost moduleNTCa description of the protection;

V1.3 modify companylogo;

V1.4 RevisePD PDOand other parameters;

V1.5 Update document templates;

Copyright © 2022, ZHUHAI ISMARTWARE TECHNOLOGY CO., LTD. May, 2022 - DS035_v1.5

No. -twenty two -total pagestwenty threePage

 SW6206
Five-port multi-protocol two-way fast charging mobile power solution supporting PD

disclaimer
Zhuhai Zhirong Technology Co., Ltd. (hereinafter referred to as "Zhirong Technology") may modify or update the products, services and this document

provided at any time without prior notice. Customers should obtain the latest relevant information before placing an order and confirm that such information is

complete and up to date.

The information contained in this document is for your convenience only, and Zhirong Technology does not make any express or implied, written or oral, statutory or

other forms of representation or guarantee, including but not limited to the purpose, characteristics, usage, and marketability of the product. etc. Zhirong Technology does not

assume any responsibility for the information and the consequences caused by the unreasonable use of the information.

Zhirong Technology does not undertake any obligation for application assistance or customer product design. Customers should be responsible for the products and

applications they use of Zhirong Technology. Customers should provide sufficient design and operation safety verification, and guarantee that no third-party intellectual

property rights will be violated when integrating Zhirong products into any application. Zhirong Technology will not be liable for any infringement.

When reselling Zhirong Technology products, if there are discrepancies or false elements in comparison with the product parameters and its statements,

all express or implied authorizations for related products of Zhirong Technology will be automatically lost, and this improper, fraudulent For commercial

behavior, Zhirong Technology reserves the right to take all legal methods. Zhirong Technology shall not be liable or liable for any such misrepresentation.

This document is only allowed to be copied if there is no tampering with the content and with relevant authorization, conditions, restrictions and statements,

otherwise Zhirong Technology has the right to pursue its legal responsibility. Zhirong Technology does not assume any responsibility or liability for such tampered documents.

Reproduction of information involving third parties is subject to additional restrictions.

Copyright © 2022, ZHUHAI ISMARTWARE TECHNOLOGY CO., LTD. May, 2022 - DS035_v1.5

No. -twenty three -total pagestwenty threePage