Scribd Logo
Upload

Welcome to Scribd!

  • 13 views

    Cable Laying JSA

    Uploaded by

    bikash.meher632

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    Cable Laying JSA

    Uploaded by

    bikash.meher632
    13 views3 pages

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    13 views3 pages

    Cable Laying JSA

    Uploaded by

    bikash.meher632

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    of 3

    TP SOLSR LTD

    TP SOLSR LTD 4 GW MFG PLANT TIRUNELVELI


    JOB SAFETY ANALYSIS
    JSA Ref No: TL/Enviro/TPSL/JSA/E&I/02 Rev No: Rev. Dt :
    Job Descripition Cable Laying
    Location TP Solar Project
    Type of Risk High Risk

    Sequance of basic job steps Potential Hazard Control Measures / Recommended action Responsible Person

    1.Person should under go medical fitness checkup,


    Induction and L1,L2 training.
    Mobilation Of Manpower Lake of Knowledge Of the involved 2.Every worker should be breafed about PTW and JSA Site Engineer
    of the activity.
    3.Every person should have above 18 years old
    1. The loading/unloading shall be carried out under
    1. Fall / slip of objects due to
    supervision of Thermax site engineer & in day-light
    inadequate handling facilities.
    only.
    2. Caught in between finger / foot 2. Hand gloves must be wear along with all required
    injuries PPE,s.
    3. Provide side wedge to restrict side shifting. Provide
    3. Damages to the material due to
    red flag on projected material and red-light during
    Loading/unloading of materials not following the safety instructions night if possible.
    Site Engineer
    at site
    4. Roll down of vehicle during
    4. Ensure weight of all items to be lifted.
    unloading and shifting of material.

    5. Tool box Talk: - discuss about safety for material


    5. work in poor illuminations handling and lifting equipment’s.
    6. Proper lighting arrangement should be provided.

    1.Caught in between finger / foot 1. Use of proper PPEs like hand gloves, safety shoes,
    injuries safety goggles etc.

    2. Follow safe material handling procedure: - Use of


    proper material handling tools & tackles/Use of
    categorized skilled manpower /equipment for
    stacking the materials.
    Storage / stacking of materials Site Engineer
    2. Fall of materials due to improper
    stacking, resulting in to accidents 3. Use of suitable wooden stopper orwedge supports
    and damage to material to avoid fall of stacked material/Provide sufficient
    cover like temporary shed / tarpaulin to avoid the
    damages to the material due to dust / rain.

    4. Material storage area should be barricaded and


    proper stacked
    1.Proper lighting arrangement to bedone in case of
    1.Injury
    poor natural lighting
    2.Ensure all electrical cable should be joint free
    3.Ensure all electrical cable should be laying above 6
    Usage of portable Power tools & mtr height with identification
    2.Electrical shock Site Engineer
    Lighting arrangement
    4.All electrical conection should be routed through
    RCCB
    5.Rubber mat should be provided infront of DB
    3.Fire 6.Fire extinquisher shuld be provided.

    1. slip and trip hazard 1.Access should be free of obstructions

    Shifting materials to the work 2.Material fall 2.Material should be handled care fully
    Site Engineer
    area 3.Hit injury 3.Recommended PPEs should be worn

    4.Cut injury 5.Ensure per person onely carry below 25kg weight
    1.Collapse of Mobile scaffolding 1.PTW system to be follow
    2.Fall of material 2.TBT should be conduct before start the job
    3.Fall of Person 3.Trained person to be involved in height work
    4.All power tools to be handled carefully to avoide
    personal injures, Ensure safeguards shall be fitted to
    the equipment

    5.Mobile scaffoldings and scissor lift to be used on


    leveled base for Access & inspection tag should be
    displayed.
    6.Proper access to be provided at work area.
    Cable Laying by scissor lift or
    Site Engineer
    Aluminum scaffilding 7.Barricade the working area before start the work.

    8.Activity should be carried out under 100%


    supervision
    9.Power and lifting tools should be inspected monthly
    basis
    10.Minimum 12mm Wire rope Lifeline should be
    provided on the rack
    11.Use proper PPE as per work
    requirement,FBH,Safety helmet,Safety shoes, Hand
    gloves Safety goggle/ face sheild

    Cut and physical injury due to sharp 1. Use all apporpriate PPE along with hand gloves.
    Area housekeeping Site Engineer
    edge
    2.Area should be clear after job completion.
    1.Portable fire extinquisher shall be maintained at
    1.Fire or explosion location
    2.First-aid box to be available
    3.Ensure emergencey plan in place and know to all
    the engaged people Site Engineer / Safety
    Emergency preparedness 2.Severe weather Officer
    4.Safe assembly point shall be explained to worker by
    supervisor
    4.Slip & trip
    5.Access should be clear from unwanted materials.
    5.Cut & hit injury
    Required PPE

    Goggles Cotton hand gloves Safety Shoe Nose Mask

    Safety helmet Reflective Jacket Double Lanyard FBH with Shock Absorber Ear plug

    Black goggles Welder & Grinder suit

    Prepared by Checked by Approved by

    You might also like