TECHNICAL

DATASHEET

AT15-3 PICK AND CARRY

CRANE

MAXIMUM CAPACITY MAXIMUM BOOM LENGTH MAXIMUM HOOK HEIGHT

15t 17.9m 17m terex.com/franna

 OVERVIEW

The AT 15-3 is our most compact pick and carry

crane, with a maximum lifting capacity of 15
tonne (17 USt). This crane combines safety and
comfort with exceptional steering flexibility,
providing the operator with the ability to lift
and manoeuvre in tight spaces. Like all Franna
cranes, the AT 15-3 is as comfortable on the road
as it is on the job site.

KEY FEATURES AND BENEFITS:

⊲ 15 tonne at 1.6m radius

⊲ 1.05 tonne at 15.8m radius
⊲ 17m maximum hook height
⊲ 10.5 tonne capacity on 3 part hook block
⊲ Single line pull 3.5 tonne
⊲ Wide stance boom lift cylinders enhance
operator’s vision.
⊲ Easy access to all key maintenance points
⊲ Modern cabin design ensures maximum
comfort for the operator

2 // AT15-3 - Technical Datasheet

TECHNICAL DESCRIPTION

01. Boom 04. Hydraulic System

Maximum boom length 17.9m Axial piston pump 62cc/rev

Maximum hook height 17m Maximum pump flow rate 130 litre/min
Boom elevation angle range -5° / 60° Maximum working pressure 210 bar
Maximum hook height with jib 19.5m Hydraulic tank capacity 120 litre
Articulation 40° R / 40° L
Machinery hook (rhino) 8 tonne

05. Chassis

Front Axle 6,000 kg

02. Winch
Rear Axle 10,000kg
Maximum line pull 3.5 tonne Axle total 16,000 kg
Two speed winch 35m/min / 70m/min Turning circle 6.6m
Hook block 10.5 tonne maximum rated capacity
(3 part)

06. Brakes & Suspension

Brake System Air operated drum brakes

03. Engine & Transmission
Suspension Two semi elliptic springs on front and
Standard engine Mercedes OM 906 rear axle plus torsion bar on front
axle for stability
Engine power 170kW
Engine torque 810 Nm
Fuel Type Diesel
Fuel Capacity 330 litre 07. Vehicle Performance
Transmission Allison 5 speed Maximum rated travel speed 80 km/h
Transfer case ZF 2:1 Ratio Gradeability50%

01
02

04

03

07
05
06

AT15-3 - Technical Datasheet // 3

 13 00 mm
51°
22° 455 mm
15° 15°

1950 mm 1950 mm 685mm 45 mm

DIMENSIONS / AREA OF OPERATION

80 mm 1420 mm 3900 mm

9225 mm
1600 mm 1050 mm 960 mm

Plan view 6130 mm 3095 mm

2410 mm

Right hand view

150 mm
5870 mm

97 mm 5000 mm
(TO CENTRE OF STEERING WHEEL)

MRC 15t 15t 9.5t

2080 mm

13 00 mm
51°
22° 455 mm
15° 15°

1950 mm 1950 mm 685mm 45 mm

80 mm 1420 mm 3900 mm 1600 mm 1050 mm 960 mm

9225 mm

Area of operation
> 1>
01º
0
A ºR
TAIR
C>TU
10
ILC
ºA
AU

6130 mm 3095 mm
TRILTO
IA
CNU
TLIZO
40° 4

AO
TN
IO
NNE *
ZZOO
40°
0°

N
N EE*
*

<1<
01º 0Aº R
10°

<10º ARTICULATION ZONE*

10°

ARTTIC
ICU
10°
ULLA

2410 mm
ATTIO
IONN
10°

ZOZNO
10°

EN* E*
10°
>1
>10
0 ººA
A
40°

> R
R1TT
I0
CºU A
I CL AURTT I
4 0°

L
I O
40

A C
NTU L A

>10
ZIO
ONNT I O
°

E* Z N

ºA
40N°EO*NE OZ

R T ICU

4 // AT15-3 - Technical Datasheet

LA
*

TIO
N
ZO <
10

N E1
°

*
RADIUS LOAD CHART

NOTE: Rated Capacity values shown are for the Pick and Carry Chart.

AT15-3 - Technical Datasheet // 5

 LOAD CHART
RATED CAPACITY CHART - FALL BLOCK
BOOM LENGTH (m)
RAD
5.66 6.00 6.50 7.00 7.50 8.00 8.50 9.00 9.50 10.00 10.50 11.00 11.50 12.00 12.50 13.00 13.50 13.86
m kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg
10500 10500 10500 10500 10500
1.6 10500 10500 10500 10500 10500
48 50 54 57 59
10500 10500 10500 10500 10500 10500 10500
2.0 10500 10500 10500 10500 10500 10500 10500
42 46 50 53 56 58 60
10400 10350 10350 10350 10350 10350 10350 9950 9650
2.5 9250 9250 9250 9250 9250 9250 9250 9200 9200
34 39 44 48 51 54 56 58 60
8500 8500 8500 8500 8500 8500 8500 8500 8500 8300 7350
3.0 7600 7600 7600 7600 7600 7550 7550 7550 7550 7550 7350
25 31 37 42 46 49 52 55 57 58 60
7200 7200 7200 7200 7200 7200 7150 7150 7150 7150 6750 5950 5650
3.5 6400 6400 6400 6400 6400 6400 6400 6400 6350 6350 6350 5950 5650
9 20 30 36 41 45 48 51 53 55 57 59 60
6950 6250 6200 6200 6200 6200 6200 6200 6200 6150 6150 5500 5250 5000 4800
4.0 6150 5550 5500 5500 5500 5500 5500 5500 5500 5500 5500 5450 5250 5000 4800
(3.61) (3.95) 20 28 35 39 43 46 49 52 54 56 57 59 60
5450 5400 5400 5400 5400 5400 5400 5400 5400 5150 4900 4650 4500 4300 4150
4.5 4850 4800 4800 4800 4800 4800 4800 4800 4800 4800 4800 4650 4500 4300 4150
(4.45) 19 28 34 38 42 45 48 50 52 54 56 57 59 60
4850 4800 4800 4800 4800 4800 4800 4800 4800 4550 4350 4200 4050 3900 3800
5.0 4300 4250 4250 4250 4250 4250 4250 4250 4250 4250 4200 4200 4050 3900 3800
(4.95) 18 27 33 37 41 44 47 49 51 53 55 56 58 59
4300 3900 3850 3850 3850 3850 3850 3850 3850 3850 3700 3550 3300 3200
6.0 3800 3450 3400 3400 3400 3400 3400 3400 3400 3400 3400 3400 3300 3200
(5.45) (5.95) 17 25 31 35 39 42 45 47 49 51 52 54
3550 3200 3200 3200 3200 3200 3200 3200 3200 3050 2950 2850
7.0 3100 2800 2800 2800 2800 2800 2800 2800 2800 2800 2800 2800
(6.45) (6.95) 16 24 29 34 37 40 43 45 47 48
2950 2700 2700 2700 2700 2700 2700 2700 2650 2600
8.0 2600 2350 2350 2350 2350 2350 2350 2350 2350 2350
(7.45) (7.95) 16 23 28 32 36 38 41 43
2500 2300 2300 2300 2300 2300 2300 2300
9.0 2200 2000 2000 2000 2000 2000 2000 2000
(8.45) (8.95) 15 22 27 31 34 36
2150 2000 2000 2000 2000 2000
10.0 1850 1750 1750 1750 1750 1750
(9.45) (9.95) 14 21 26 29
1900 1750 1750 1750
11.0 1600 1500 1500 1500
(10.45) (10.95) 14 19
1650 1550
11.81 1400 1350
(11.45) (11.81)

KEY:
RC (KG) LESS THAN 10 DEG ARTICULATION
RC (KG) GREATER THAN 10 DEG ARTICULATION
9 BOOM ANGLE
(3.61) RADIUS AT ZERO BOOM ANGLE

“Weight of slings & hook block to be added to load

Read and understand warning notes before operating crane”

6 // AT15-3 - Technical Datasheet

OUR LOCATIONS

BRISBANE

PERTH

SYDNEY

MELBOURNE

Brisbane (Head Office) Sydney

Terex Australia Pty Ltd Terex Australia Pty Ltd
585 Curtin Avenue East (PO Box 1396) 114 Hassall Street
Eagle Farm QLD 4009, Australia Wetherill Park NSW 2164, Australia
Tel: +61 7 3868 9600 Tel: +61 2 8786 4444
Fax: +61 7 3268 2489 Fax: +61 2 8786 4455
Services: Manufacturing, Sales, Service, Parts Services: Sales, Service, Parts

Melbourne Perth
Terex Australia Pty Ltd Terex Australia Pty Ltd
133 Logis Boulevard 39 Catalano Road
Dandenong South VIC 3175, Australia Canning Vale WA 6155, Australia
Tel: +61 3 8794 4170 Tel: +61 8 9232 0000
Fax: +61 3 9551 8143 Fax: +61 8 9232 0051
Services: Sales, Service, Parts Services: Sales, Service, Parts

Tel: 1800 837 395

Email: [email protected]

The material in this document is for information only and is subject to change without notice.
Franna® assumes no liability resulting from errors or omissions in this document, or from the use of the information contained herein.
Due to continual product development we reserve the right to change specifications without notice. Product performance figures given in this
brochure are for guidance purposes only, this information does not constitute an expressed or implied warranty or guarantee, but shows test
examples. These results will vary depending on application. Photographs are for illustrative purposes only; some or all of the machines in the

www.terex.com/franna
illustrations may be fitted with optional extras. Please check with your Dealer for details on optional extras.
Published and Printed in November 2019.