Division of City Schools

Camp Crame High School

District IV, Quezon City, Metro Manila

PERIODICAL TEST in T.L.E. / G8

SCORE
COMPUTER SYSTEM SERVICING

NAME:______________________________________ SECTION:__________

Directions: Choose the letter of the best answer. Write your answer on this sheet of paper.

1. It is a handheld device that aids to carry out and accomplish a function.

A. Equipment

B. Implements

C. Materials

D. Tools

2. Which of the following is not an example of a hardware tool?

A. Diagnostic Tools C. Electro-static discharge

B. Electrical tools D. Hand tools

3. How can we prolong the safe use of our hand tools following guidelines on

Environment Safety and Health Program requirements?

A. A single tool can be used for different types of jobs.

B. All tools must be kept together in one container.

C. Clean tools with water and soap

D. Each tool must be operated according to the manufacturer’s instructions.

4. To test the integrity of circuits and the quality of electricity in computer

components, you need to use

A. Anti-static mat C. Multimeter

B. Loopback Adapter D. Part-retriever

5. The following are examples of hand tools except

A. Anti-static wrist strap C. Torx screwdriver

B. Flathead screwdriver D. Tweezers

6. It is a computer memory that connects directly to the CPU.

A. Expansion Slot

B. Random-access memory
C. Read-Only Memory

D. Video Card

7. Which of the following hardware components is used to allow the user to input

texts, numbers, special characters, and other functions?

A. Gamepad

B. Keyboard

C. Mouse

D. Scanner

8. Modern computers require speakers to appreciate movies, music, graphic

presentation, and even computer alerts. To which hardware component does the

speaker belong?

A. Input Devices

B. Output Device

C. Peripheral Device

D. Processing Device

9. If you are to create a typewritten report or document, which of the following

applications will you use?

A. Internet Explorer

B. MS Excel

C. MS PowerPoint

D. MS Word

10. Applying Occupation Health and Safety involves the following procedures

EXCEPT;

A. Always switch off the power of the computer and unplug it before working on it.

B. Do not work alone so that there is someone who takes care of you in case

of an emergency.

C. Plug-in the computer system while working with computer parts.

D. Take away any liquid near your working area to avoid getting electrocuted

or accidentally damaging computer parts.

11. It is one of the best tools for creating typewritten documents.

A. Home page

B. MS Word
C. Uniform Resource Locator (URL)

D. Web page

12. It is information from another computer designed for the worldwide web.

A. Home page

B. Uniform Resource Locator (URL)

C. Web browser

D. Web page

13. The first web page that the web browser will open.

A. Home page

B. Uniform Resource Locator (URL)

C. Web browser

D. Web page

14. The address or location of a website that the user enters for his entry to a specific

address.

A. Home page

B. Uniform Resource Locator (URL)

C. Web browser

D. Web page

15. The collection of interconnected networks of a computer.

A. Infranet

B. Internet

C. Internet protocol

D. Networking

16. This is commonly used code in computers to represent and interpret letters,

numbers, and special characters with bits.

A. Advanced Technology Attachment

B. American Standard Code for Information Interchange

C. Serial Advanced Technology Attachment

D. Small Computer System Interface

17 It is responsible for controlling internal and external devices to perform

Arithmetic and Logical operations in the computer systems.

A. Arithmetic Logic B. Digital Logic C. CPU D. Hard Disk

18. These chips are located in the motherboard that contains instructions that can be

directly accessed by the CPU

A. DIMM B. DRAM C. ROM D. SRAM

19. The smallest measuring tool used in horizontal short distances.

A. Protractor B. Ruler C. T- square D. Triangles

20. Convert 30 to binary.

A. 11110 B. 11101 C. 11011 D. 11001

21. It is represented by as a small rectangle with curved corners used at the start

and end of a flowchart.

A. Decision B. Process C. Sub-process D. Terminator

22. It refers to an action clearly stated in a process and is represented by a

rectangle.

A. Decision B. Process C. Sub-process D. Terminator

23. It is a major process broken up into simpler processes represented by a

rectangle with double lines on each side.

A. Decision B. Process C. Sub-process D. Terminator

24. Which of the following schematic symbol represent a diode?

A. B. C. D.

25. Resistor symbols are drawn in two different ways; as a zigzag resistor and ______.

A. Circle B. Coil C. Rectangular D. Square

6. Which of the following devices are classified as flush, hanging, and surface types

that will hold and protect the lamp?

A. Convenient outlet B. Fuse C. Lamp holders D. Switch

27. A lineman uses this tool for gripping, holding, and cutting electrical wires, cables,

and even small nails.

A. Combination pliers C. Long nose pliers

B. Fuse pliers D. Side cutting pliers

28. The following are the most common electrical supplies and materials. Which one

is NOT?

A. Convenience outlet C. Lamp holders

B. Extension cord D. Male plug

29. Electronic circuit is the work performed to the end of a wire that allows it to
connect to a device. Which of the following is NOT considered a device?

A. Appliances B. Connector C. Switch D. Terminal

30. When joining 2 pieces of metal or other ductile materials by deforming one or both

of them to hold the other, you are performing a_____.

A. crimping B. desoldering C. splicing D. soldering

31. A test of circuit-board components can be done to some extent without removing

the components from the circuit board. Which among the following is considered

as circuit board components?

A. Integrated circuits C. Resistant

B. Ohmmeter D. Voltage

32. More comprehensive testing can be performed on electronics components when

these are removed from the circuit board. Which of the following will measure input and output voltages?

A. Multimeter C. Transistors

B. Ohmmeter D. Voltmeter

33. Checking and connecting one component to other computer is one way to

diagnose computer errors. Which of the given choices is being referred to?

A. Check cables C. Hardware settings

B. Event viewer D. Trial and error

34. Check RAM and CPU consumptions using the Task Manager to stop running

programs. Which of the following commands will direct you to Task Manager?

A. CTRL+ALT+DEL C. CTRL+HOME+DEL

C. CTRL+END+DEL D. SHIFT+ALT+DEL

35. Troubleshooting any circuit is very important to the check wire connection,

damaged components, quality of soldering, and to identify specific wire or

electrical connections. What process must be done to test the continuity of the

electronic circuit?

A. Continuity Test C. Power On Self-Test

B. Multimeter Testing D. Single Line Testing

36. Which of the following tools is used to test the basic functionality of specific

computer ports?

A. Digital Multimeter C. Loopback Adapter

B. LAN Tester D. Toner probe

37. Which of the following is not an example of disk management tools?

A. Chkdsk C. Dxdiag

B. Defrag D. Fdisk

38. Which of the following is the first step in testing computer components?

A. Evaluate errors C. Respond to errors

B. Gather information D. Validate data

39. During the boot routine, you will hear a series of beeps that indicates an error in

one of the computer components. What do you call these beep sounds?

A Beep Codes C. Power On Self-Test

B. Hard Disk Drive Indicator D. System Error Message

40. Which will help you troubleshoot problems relating to Windows Operating

Systems?

A. Diagnostic Tools C. Software Tools

B. Disk Management Tools D. Diagnostic Test Management

41. Which tool is used for hardware to stand on to prevent static electricity from building up?

a. Anti-static mat c. Philips head screwdriver

42. Which tool is used to loosen or tighten cross-head screws?

a. Anti-static mat c. Philips head screwdriver

b. Hex driver d. Wire cutter

43. Which tool is sometimes called a nut driver? It is used to tighten nuts in the same way that a screwdriver tightens screws?

a. Anti-static mat c. Philips head screwdriver

b. Hex driver d. Wire cutter

44. Which tool is used to strip and cut wires?

a. Anti-static mat c. Philips head screwdriver

b. Hex driver d. Wire cutter

45. Which tool is used to retrieve parts from location that are too small for your hand to fit?

a. Part Retriever c. Cable ties

b. Lint-free Cloth d. Flat head screwdriver

46. Which tool is used to clean different computer components without scratching or leaving debris?

a. Part Retriever c. Cable ties

b. Lint-free Cloth d. Flat head screwdriver

47. Which tool is used to bundle cables neatly inside and outside of a computer?
a. Part Retriever c. Cable ties

b. Lint-free Cloth d. Flat head screwdriver

48. Which tool is used to loosen or tighten slotted screws?

a. Part Retriever c. Cable ties

b. Lint-free Cloth d. Flat head screwdriver

49. Which tool is used to loosen or tighten screws that have a star-like depression on the top, a feature that is mainly found on
laptop?

a. Anti-static mat c. Philips head screwdriver

b. Torx screwdriver d. Wire cutter

50. Which tool is used to blow away dust and debris from different computer parts without touching the components?

a. Anti-static mat c. Compressed air

b. Hex driver d. Wire cutter