MANUFACTURING

WPC DOOR FRAMES &

PRE- HUNG DOOR SOLUTION
WPC MATERIAL COMPOSITION PRINCIPLE
WPC (wood and plastic composite) is a new green material that can be recycled. It is made from a unique combination
of wood fiber and new plastic through large-scale extrusion. It has the characters of wood's workability, plastic's
diversity and flexibility. It is widely used in many areas.

It offers the best advantages of plastic and wood. The plastic shields the wood from deformation, crack, moisture and
insect damage and the wood projects the plastic from aging & heat-labile.

FEATURES OF WPC FRAMES

Highly Termite Anti-Corrosion Easy to Assemble
Fire Resistant
Resistant Characteristics & Fix

High Durability & No Bending, Cracking

Excellent Finishing Environment Friendly
Long Lasting & Seepage

THE MERITS OF USING WPC DOOR FRAMES

• Can be cleaned by water
• Antibacterial & alkali resistance
• With good surface flatness, high strength and no deformation
• Cold and hot resistant, anti-aging
• No formaldehyde, ammonia and other pollution HOLLOW WPC FRAME WITH
• Recyclable and truly green product USING 100% VIRGIN POLYMERS
FINISHES AVAILABLE

PAINT PVC FILM WRAPPING POLISH FRAME WITH SIDE WINDOW

SECTION SIZES AVAILABLE:

Frame - 100 x 45mm (Single rebate), 90 x 38mm (Single rebate) and 150 x 45mm (Double rebate)
Architrave - 45 x 18mm (Front) and 30 x 12mm (Rear)
MOULDED PANEL DOORS

PANEL PANEL OAK PANEL OVAL ELEGANCE

FLUSH DOORS (DECORATIVE VENEERED)

GOLDEN TEAK FD GOLDEN TEAK FD GOLDEN TEAK FD

WHITE OAK FD WHITE OAK FD SAPELE FD CHERRY SMOKED SILVER OAK

TECHNICAL SPECIFICATIONS OF DOORS :
Face - 3.15mm exterior grade HDF/ Masonite 3.15mm Skin
Core - (i) TPB (Tubular Particle Board) from Sauerland
Spanplatte, Germany
(ii) Kiln Dried Pinewood imported from USA - SYP
(Southern Yellow Pine)
Glue - Dynea PF Thermosetting Glue imported from Norway
Inner Frame - 55++ mm on all four sides with Imported Dried
Pinewood. Any type of locks, handles, fittings etc
can be fixed just like a solid wood door
Size - Up to 8 feet x 4 feet
Thickness - 25mm to 50mm
External Lipping - Teak/Hardwood can be provided against order
Additional Products - Veneered Doors, laminated doors,
decorative doors with grooving etc
ACOUSTIC DOOR SEAL
Application - Around the head and jambs of
acoustic and smoke control doorsets

Performance - Smoke tested in accordance with

BS 476-31.1, Acoustically tested in
accordance with BS EN ISO 10140-2,
1,000,000 cycle tested

Material - Flexible and rigid PVC

Fixing - Self-adhesive

Colours - Black (BK) / Brown (B) / White (W)

HARDWARE USED FOR INSTALLING OUR DOOR FRAMES

HARDWARE USE IN THE INSTALLATION PROCESS
Screws Joining The 3 parts of the frame

PU Foam Fixing the frame by leaving a 5-6mm gap between the frame and the wall

Anchors / Fasteners Fixing of the frame against the wall

Adhesive Fixing of the 3 parts of the frame and fixing of architrave

HOW TO GET THE BEST OF OUR DOORS

STORAGE HANDLING
The doors must be horizontally stacked on a flat and dry Check the doors for defects and damage immediately
surface. upon receipt.
The doors must not be stored in direct sunlight. The doors must be kept dry at all times.
To reduce the risk of colour change do not store
FIXING veneered and pre-finished doors in direct sunlight.
2.5 mm space must be provided on all sides of the door The door is designed for internal use only.
shutter. This is to accommodate minor movements of the
It is made from wood and like all other timber based
door frames.
materials it can be adversely affected by moisture.
Hinges must be aligned before fitting the door. If
alignment is not done correctly, doors can bend. If exposed to water or high humidity then it may
discolour or distort.
The doors can be cut all sides up to 12 mm per side.
Cutting must be done equally on both sides. In the case Do not hang the doors immediately after plastering.
of door with lipping on one side, full adjustment can be After hanging in new houses, freshly plastered rooms,
done on the side where lipping is not fixed. kindly leave the doors half open to allow air circulation
All four sides of the doors must be primed or sealed with until the house is completely dried out.
wood sealant at the earliest. If cutting on the sides for If the door has to be trimmed to width to fit, equal
hinge fitting is done after priming or painting, make sure amounts must be removed from each side. If the door
this area is sealed or primed again. has to be trimmed in length, equal amounts must be
Bottom portion of door must be painted before the fitting. removed from the top and bottom

The bathrooms doors must be fitted with teak or The trimming tolerance is 12mm per side. (Height and
hardwood lipping at the bottom to prevent moisture Width wise)
absorption. Guarantee for the bathroom door is void if
lipping is not provided.
IMPORTANT GUIDELINES TO
GET WARRANTY
While fitting the door, keep 2.5 mm distance on four sides of the door. Size may
fluctuate according to the climate change.

Give right measurement when you order for doors and do not try resizing it later.
Never fix teak doors without sealer and melamine polish.

Company gives no warranty to fungus effected teak doors.

We recommend minimum 35 mm thickness doors if you are using special locks.

Keep unfitted doors on the level floor.

The colour of teak door skin may vary according to different lots.

Keep original Cash bills to get a warrantee

The company will not be responsible for any compensations that do not follow
the above conditions.
TENDER SPECIFICATIONS

Providing 100 x 45mm Cellular Hollow WPC (Wood Plastic Composite) Providing 100 x 45mm Cellular Hollow WPC (Wood Plastic Composite)
Door Frame with rebate of 37mm Laminated with 0.14 to 0.20mm Door Frame with rebate of 37mm. The frame shall have 9mm deep
Wooden Textured PVC Film. The frame shall have 9mm deep groove for groove for Front Architrave Fixing. Outer layer of Cellular Frame shall
Front Architrave Fixing. Outer layer of Cellular Frame shall be 5mm thick be 5mm thick and other 2 layer shall be of 4mm thickness.
and other 2 layer shall be of 4mm thickness.
Front Architrave shall be of 45 x 18mm Hollow WPC section and Rear
Front Architrave shall be of 45 x 18mm Hollow WPC section, Laminated Architrave shall be of 30x12 Hollow WPC section. The Frames and
with 0.14 to 0.20mm Wooden Textured PVC Film. Architraves can be finished with Paint or Polish.

30 x 12mm hollow Rear Architrave, having width of 30mm and thickness The Frame and Architraves shall be supplied in 3 parts as per
of 12mm Laminated with 0.14 to 0.20mm Wooden Textured PVC Film. customized size assembled with miter joint. The Door Frame having
Material Density of 990kg/m3(IS 2380 – part - 3), Shore Hardness (D) of
The Frame and Architraves shall be supplied in 3 parts as per customized
62 (ASTM D2240), Moisture Content less than 0.01% and Water
size assambeled with miter joint. The Door Frame having Material Density
Absorption of less than equal to 0.2% (IS 2380 – part – 16).
of 990kg/m3(IS 2380 – part - 3), Shore Hardness (D) of 62 (ASTM D2240),
Moisture Content less than 0.01% and Water Absorption of less than Providing 32mm MPD-12 Door with Wood Texture, Primer Finish
equal to 0.2% (IS 2380 – part – 16). suitable for staining or painting. Recess as per IS Standards including
3.15mm Exterior Grade Masonite Wood Grains Door Skin, Tubular
Providing 32mm Shutters with both side Laminate, with matching shade
Particle Board (from Sauerland Spanplatte Germany) as a filler, 55++
of Wooden Textured PVC Film Lamination of the frame. Including 3.15mm
mm on all 4 sides with imported Dried Pinewood (USA), Dynea PF
exterior grade HDF Door Skin with Tubular Particle Board, all four edges
Thermosetting Glue from Norway. Can be finished with Paint or Polish.
of shutter shall made of 55mm dried Pinewood Frame. The matching PVC
beading shall be machine glued with Frame. The Frame to be fixed using PU Foam and Anchor / Fasteners and
requisite Hardware. The Door Shutter to be fixed on the Frame with using
The Frame to be fixed using PU Foam and Anchor/Fasteners and requisite
good quality S.S Hinges and Lock.
hardware. The Door Shutter to be fixed on the Frame with using good
quality S.S Hinges and Lock. Supply and installation of Door and Shutter of brand: PathFrame with
5 year warranty.
Supply and installation of Door and Shutter of brand: PathFrame with 5
year warranty. Warranty : The set of Frame and Door installed shall carry replacement
warranty of 5 years for any manufacturing defects such as Warpage,
Warranty : The set of Frame and Door installed shall carry replacement
Delamination, Borer Or Termite Attack.
warranty of 5 years for any manufacturing defects such as Warpage,
Delamination, Borer Or Termite Attack
TEST CERTIFICATES OF THE PRODUCT
TEST Flammability Hardness (Shore D) Material Density Water Absorption

TEST METHOD VL-94 ASTM D 2240 IS 2380 (Part-3) IS 2380 (Part-16)

RESULT OBTAINED Match With Vo 62 990kg/m3 0.26%

*All test results are from CIPET

INSTALLATION PROCESS OF WPC DOOR FRAME

Scan this QR Code to watch our video for the installation process.
Or go to: https://youtu.be/6mPm6945hn0

OUR ESTEEMED CLIENTS

 PATHFRAME INDUSTRIES
(Office) 202/A, Shivalik-10, Opp. SBI Zonal Office,
Ambawadi, Ahmedabad - 380 015

(Factory) A-23 Kalpratu Industrial Estate,

Beside Sarvoday Hotel, Moraiya Village,
Changodar, Ahmedabad - 382 213

+91 99241 32956, +91 79 26305158 [email protected] www.pathframe.com