Scribd Logo
Upload

Welcome to Scribd!

  • 5 views

    4260D Tier2 DCEC

    Uploaded by

    wahyu santoso
    Engine D13

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    4260D Tier2 DCEC

    Uploaded by

    wahyu santoso
    5 views2 pages
    Engine D13

    Original Title

    4260D-Tier2-DCEC

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Engine D13

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    5 views2 pages

    4260D Tier2 DCEC

    Uploaded by

    wahyu santoso
    Engine D13

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Engine Cummins 6CTAA8.

    3
    Rated Power 194 kW (260 hp / 264 ps) @ 2,200 rpm
    Blade Width 4,270 mm
    4260D
    Maximum Speed
    Draw Bar Pull
    44 km/h
    112 kN MOTOR
    GRADER
    Operating Weight 20,500 kg

    T O U GH W O R LD. T O UGH EQ U IPM E N T.


    4260D
    SPECIFICATIONS >>>

    ENGINE MOLDBOARD PERFORMANCE


    Emission Regulation Tier 2 / Stage II Bank Cut Angle 28~71°
    Manufacturer Cummins Moldboard Lift Above Ground 570 mm
    Model 6CTAA8.3 Moldboard Side Shift, left/right 465 / 933 mm
    Rated Power 194 kW (260 hp / 264 ps) @ 2,200 rpm Maximum Sloping Angle 90°
    Maximum Torque 1100 N·m / 1,400 rpm Cutting Depth 838 mm
    Number of Cylinders 6 Circle Rotation 360°
    Aspiration Turbo & air-to-air intercooled Circle Diameter 1,576 mm
    Circle Thickness 150 mm
    TRANSMISSION
    Transmission Type Power shift DIMENSIONS
    Torque Converter Single stage, three elements Wheelbase 6,550 mm
    Maximum Travel Speed, fwd 44 km/h Overall Length 9,680 mm
    Maximum Travel Speed, rev 32 km/h Overall Width 2,860 mm
    Number of Speeds, fwd 6 Overall Height with Cab 3,530 mm
    Number of Speeds, rev 3 Clearance under Front Axle 545 mm
    Moldboard Standard Length 4,270 mm
    AXLES
    Moldboard Standard Thickness 19 mm
    Differential Type Limited slip standard
    Moldboard Standard Height 610 mm
    Final Drive Type Chain drive
    Axle Oscillation 16° OPERATING WEIGHTS
    Front Axle, Wheel Lean Angle Left / right 18° Operating Weight 20,500 kg

    STEERING SERVICE CAPACITIES


    Steering Configuration Load sensor steering gear Fuel Tank 480 L
    Steering Relief Pressure 16.7 MPa Engine Oil 21 L
    Minimum Turning Radius 7,500 mm Cooling System 38 L
    Steering Angle ±50° Hydraulic System 125 L
    Frame Articulation Angle ±27° Transmission and Torque Converter 27 L
    Tandems, each 75 L
    BRAKES
    Service Brake Type Wet brake OPTIONAL EQUIPMENT
    Service Brake Location Rear axle Rear Ripper Rotary Beacon
    Frictional Flake Worm Box Front Dozer
    TIRES
    Automatic Leveling System
    Tire Size 20.5-25

    HYDRAULIC SYSTEM
    Main Pump Type Gear
    Main Relief Pressure 20 MPa
    Main Pump Flow 122 L/min

    WORKING CAPACITIES
    Maximum Draw Pull 112 kN
    Cutting Pressure 10,120 kg

    TANDEM DRIVE PERFORMANCE


    Height 670 mm
    Width 215 mm
    Center Distance 1,696 mm

    Guangxi Liugong Machinery Co., Ltd. 04/2023 Designed by LiuGong


    No. 1 Liutai Road, Liuzhou, Guangxi 545007, PR China Replace the previous versions of 02/2023
    T: +86 772 3886124 E: [email protected]
    www.liugong.com
    Specifications and designs are subject to change without notice. Machines shown may include optional equipment. LiuGong standard and optional equipment may vary from region to region.
    Please consult your LiuGong dealer for information specific to your area. Engine power kW is converted to horsepower (1 kW=1.3596 ps and 1 kW=1.3410 hp) in this file.

    You might also like