Scribd Logo
Upload

Welcome to Scribd!

  • 22 views

    Powerline Adapter Installation Guide

    Uploaded by

    Abhijeet

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Powerline Adapter Installation Guide

    Uploaded by

    Abhijeet
    22 views6 pages

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    22 views6 pages

    Powerline Adapter Installation Guide

    Uploaded by

    Abhijeet

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 6

    http://www.mercusys.

    com

    Specifications are subject to change without notice. is a registered trademark of Quick


    MERCUSYS TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or
    registered trademarks of their respective holders.
    No part of the specifications may be reproduced in any form or by any means or used to make any Installation Guide
    derivative such as translation, transformation, or adaptation without permission from MERCUSYS
    TECHNOLOGIES CO., LIMITED. Copyright © 2020 MERCUSYS TECHNOLOGIES CO., LIMITED. All
    rights reserved. Powerline Adapter
    For technical support, the user guide and more information, please visit
    http://www.mercusys.com/support.
    7107500142 REV1.0.1
    CONTENTS
    01 / English
    05 / Deutsch
    08 / Español
    11 / Français
    14 / Italiano
    17 / Português
    20 / Nederlands
    23 / Bahasa Indonesia
    26 / Tiếng Việt
    29 / Türkçe
    36 /
    English

    Plug and Play

    Powerline
    Internet

    Adapter Adapter
    WAN LAN

    1. Connect one adapter to a LAN port of your router using an Ethernet cable.
    2. Plug the other adapter into the wall outlets on the same electrical circuit.
    3. Wait until the Power LED on any adapter turns solid on.
    4. Connect your computer to the adapter using an Ethernet cable.
    5. Enjoy!
    More: To add additional Powerline adapters and extenders with the default
    settings, simply plug them into the wall outlets on the same electrical circuit.

    1
    English

    Attention
    • Plug the powerline devices directly into the wall outlets but not the power strips.
    • For passthrough powerline devices, plug the power strips into the integrated
    electrical sockets of the powerline devices.

    Secure the Powerline Network with the Pair Button


    Tips: We recommend that you plug in the powerline devices near each other when pairing.
    Set up a secure network:
    1 Press the Pair 2 Within 2 minutes, 3 Done.
    button for 1 press the Pair button
    second on one for 1 second on
    adapter. another adapter.
    LED Status Indication
    A B Solid On The powerline adapter is on.
    The powerline adapter is off.
    Off
    Quickly Or Power-Saving Mode is on.
    Solid
    Blinking On Blinking quickly: Pairing is in
    process.
    Blinking
    Blinking slowly: The powerline
    adapter is not paired.
    2
    English
    If you have more than 2 powerline devices, repeat the steps below on each
    additional devices to be configured:
    1 Press the Pair button for 1 2 Within 2 minutes, press the 3 Done.
    second on any powerline Pair button for 1 second
    device in the secure on the additional powerline
    network. device.
    Secure Network

    A B C

    Quickly
    Blinking Solid On

    FAQ (Frequently Asked Questions)


    Q1. How do I reset my powerline adapter?
    A1. With the powerline adapter plugged into to the electrical outlet, press and hold
    the Pair button until the Power LED goes off momentarily and comes back on.

    3
    English
    Q2. How to troubleshoot if there is no internet connection in my
    powerline network?
    A1. Make sure all powerline devices are on the same electrical circuit.
    A2. Make sure all Power LEDs are solid on. If not, pair your adapters and extenders
    again.
    A3. Make sure all hardware connections are correctly and securely connected.
    A4. Check if you have an internet connection by connecting the computer directly
    to the modem or router.
    A5. Make sure your computer’s IP address is in the same segment as your router’s.
    Q3. What can I do if a successfully-paired powerline device does not
    reconnect after it has been moved to a new location?
    A1. Try another socket and make sure it is on the same electrical circuit.
    A2. Try to pair it again, and make sure the Power LED is solid on.
    A3. Check for possible interference, such as a washer, air conditioner or other
    household appliances that may be too close to one of the powerline devices.
    Plug the appliance into the integrated electrical socket (if the powerline device
    has one) to remove some electrical noise.
    To learn more about the powerline adapter, please visit our website
    http://www.mercusys.com .
    4

    You might also like