21 March 2024 15:38

PAGE NO. 1

****************************************************
* *
* STAAD.Pro 2023/Academic *
* Version 23.00.01.25 *

ly
* Proprietary Program of *
* Bentley Systems, Inc. *
* Date= MAR 24, 2024 *
* Time= 0:36: 5 *
* *

On
* Licensed to: *
****************************************************

1. STAAD SPACE
INPUT FILE: C:\Users\divin\OneDrive\Desktop\New folder (2)\Structure1.STD

se
2. START JOB INFORMATION
3. ENGINEER DATE 24-MAR-24
4. END JOB INFORMATION
5. INPUT WIDTH 79
6. UNIT METER KN
7. JOINT COORDINATES
8. 1 0 0 6.00001
cU
9. 2 3.00001 0 6.00001
10. 3 6.00001 0 6.00001
11. 4 3.00001 0 4.00001
12. 5 0 0 8.00002
13. 6 3.00001 0 8.00002
mi
14. 10 6.00001 0 8.00002
15. 11 10 0 0
16. 12 4.50001 0 5.00001
17. 13 1.5 0 5.00001
18. MEMBER INCIDENCES
19. 1 1 2
de

20. 2 2 3
21. 3 3 12
22. 4 4 13
23. 5 1 5
24. 7 6 2
ca

25. 8 2 4
26. 14 3 10
27. 15 12 4
28. 16 2 12
29. 17 13 1
rA

30. 19 13 2
31. DEFINE MATERIAL START
32. ISOTROPIC CONCRETE
33. E 2.17184E+07
34. POISSON 0.17
35. DENSITY 23.5615
Fo

36. ALPHA 5.5E-06

37. DAMP 0.05
38. G 9.28137E+06

C:\Users\divin\OneDrive\Desktop\New folder (2)\Structure1.anl Page 1 of 7

 21 March 2024 15:38

STAAD SPACE -- PAGE NO. 2

39. TYPE CONCRETE

40. STRENGTH FCU 27578.9
41. END DEFINE MATERIAL
42. MEMBER PROPERTY
43. 5 PRIS YD 0.4 ZD 0.5
44. 7 PRIS YD 0.4 ZD 0.5

ly
45. 14 PRIS YD 0.4 ZD 0.5
46. 1 PRIS YD 0.5 ZD 0.5
47. 2 PRIS YD 0.5 ZD 0.5
48. 3 PRIS YD 0.5 ZD 0.5
49. 4 PRIS YD 0.5 ZD 0.5

On
50. 8 PRIS YD 0.5 ZD 0.5
51. 15 PRIS YD 0.5 ZD 0.5
52. 16 PRIS YD 0.5 ZD 0.5
53. 17 PRIS YD 0.5 ZD 0.5
54. 19 PRIS YD 0.5 ZD 0.5
55. CONSTANTS
56. MATERIAL CONCRETE MEMB 1

se
57. MATERIAL CONCRETE MEMB 2
58. MATERIAL CONCRETE MEMB 3
59. MATERIAL CONCRETE MEMB 4
60. MATERIAL CONCRETE MEMB 5
61. MATERIAL CONCRETE MEMB 7
62. MATERIAL CONCRETE MEMB 8
63. MATERIAL CONCRETE MEMB 14
cU
64. MATERIAL CONCRETE MEMB 15
65. MATERIAL CONCRETE MEMB 16
66. MATERIAL CONCRETE MEMB 17
67. MATERIAL CONCRETE MEMB 19
68. SUPPORTS
mi
69. 6 FIXED
70. 5 PINNED
71. 10 PINNED
72. LOAD 1 LOADTYPE NONE TITLE LOAD CASE 1
**WARNING- JOINT NO. 11 NOT CONNECTED. OK, IF PART OF CONTROL/DEPENDENT.
**WARNING- THIS STRUCTURE IS DISJOINTED. IGNORE IF
de

CONTROL/DEPENDENT OR IF UNCONNECTED JOINTS.

73. MEMBER LOAD
74. 1 CON GX 20 0 0
75. 3 CON GX -15 0 0
76. MEMBER LOAD
ca

77. 3 CON GY -60 1.8077 0

78. 19 CON GY -60 0 0
79. PERFORM ANALYSIS PRINT ALL
rA
Fo

C:\Users\divin\OneDrive\Desktop\New folder (2)\Structure1.anl Page 2 of 7

 21 March 2024 15:38

STAAD SPACE -- PAGE NO. 3

P R O B L E M S T A T I S T I C S
-----------------------------------

ly
NUMBER OF JOINTS 10 NUMBER OF MEMBERS 12
NUMBER OF PLATES 0 NUMBER OF SOLIDS 0
NUMBER OF SURFACES 0 NUMBER OF SUPPORTS 3

Using 64-bit analysis engine.

On
SOLVER USED IS THE IN-CORE ADVANCED MATH SOLVER

TOTAL PRIMARY LOAD CASES = 1, TOTAL DEGREES OF FREEDOM = 48

TOTAL LOAD COMBINATION CASES = 0 SO FAR.

se
cU
mi
de
ca
rA
Fo

C:\Users\divin\OneDrive\Desktop\New folder (2)\Structure1.anl Page 3 of 7

 21 March 2024 15:38

STAAD SPACE -- PAGE NO. 4

LOADING 1 LOADTYPE NONE TITLE LOAD CASE 1

-----------

ly
MEMBER LOAD - UNIT KN METE

MEMBER UDL L1 L2 CON L LIN1 LIN2

On
*** NOTE : THE CONCENTRATED MEMBER LOAD APPLIED AT ONE OF THE NODE POINTS
OF MEMBER # 1 (LOAD # 1) WILL BE TREATED AS A LOAD ACTING,
NOT AT THE JOINT, BUT AT AN INFINITESIMAL DISTANCE AWAY FROM THE JOINT
WITHIN THE MEMBER SPAN. TO AVOID THIS, YOU MAY APPLY THE LOAD AS A
JOINT LOAD INSTEAD.
PLEASE NOTE, FOR OTHER MEMBERS IF LOADING IS APPLIED AT MEMBER ENDS,
IT WILL BE TREATED IN THE SAME MANNER AS IS DONE FOR MEMBER # 1

se
1 20.0000 GX 0.00
3 -15.0000 GX 0.00

MEMBER LOAD - UNIT KN METE

cU
MEMBER UDL L1 L2 CON L LIN1 LIN2

*** NOTE : THE CONCENTRATED MEMBER LOAD APPLIED AT ONE OF THE NODE POINTS
OF MEMBER # 3 (LOAD # 1) WILL BE TREATED AS A LOAD ACTING,
mi
NOT AT THE JOINT, BUT AT AN INFINITESIMAL DISTANCE AWAY FROM THE JOINT
WITHIN THE MEMBER SPAN. TO AVOID THIS, YOU MAY APPLY THE LOAD AS A
JOINT LOAD INSTEAD.
PLEASE NOTE, FOR OTHER MEMBERS IF LOADING IS APPLIED AT MEMBER ENDS,
IT WILL BE TREATED IN THE SAME MANNER AS IS DONE FOR MEMBER # 3
de

3 -60.0000 GY 1.80
19 -60.0000 GY 0.00
*WARNING- ZERO STIFFNESS IN DIRECTION 1 AT JOINT 11 EQN.NO. 31
LOADS APPLIED OR DISTRIBUTED HERE FROM ELEMENTS WILL BE IGNORED.
THIS MAY BE DUE TO ALL MEMBERS AT THIS JOINT BEING RELEASED OR
ca

EFFECTIVELY RELEASED IN THIS DIRECTION.

*WARNING- ZERO STIFFNESS IN DIRECTION 2 AT JOINT 11 EQN.NO. 32
*WARNING- ZERO STIFFNESS IN DIRECTION 3 AT JOINT 11 EQN.NO. 33
*WARNING- ZERO STIFFNESS IN DIRECTION 4 AT JOINT 11 EQN.NO. 34
*WARNING- ZERO STIFFNESS IN DIRECTION 5 AT JOINT 11 EQN.NO. 35
rA

*WARNING- ZERO STIFFNESS IN DIRECTION 6 AT JOINT 11 EQN.NO. 36

FOR LOADING - 1
APPLIED JOINT EQUIVALENT LOADS
JOINT FORCE-X FORCE-Y FORCE-Z MOM-X MOM-Y MOM-Z
Fo

1 2.00000E+01 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00

2 1.86266E-05-4.20746E-10 0.00000E+00-1.44117E-10 0.00000E+00 2.16177E-10
3-1.50000E+01-3.47925E-10 1.03391E-05-1.17166E-10 2.32474E-05 1.75749E-10
12-1.60944E-05-6.00000E+01-1.07296E-05 8.38447E-05-3.60297E-11-1.25767E-04

C:\Users\divin\OneDrive\Desktop\New folder (2)\Structure1.anl Page 4 of 7

 21 March 2024 15:38

STAAD SPACE -- PAGE NO. 5

APPLIED JOINT EQUIVALENT LOADS

JOINT FORCE-X FORCE-Y FORCE-Z MOM-X MOM-Y MOM-Z
13 0.00000E+00-6.00000E+01 0.00000E+00 9.29892E-05 0.00000E+00-1.39485E-04

STATIC LOAD/REACTION/EQUILIBRIUM SUMMARY FOR CASE NO. 1

LOADTYPE NONE TITLE LOAD CASE 1

ly
CENTER OF FORCE BASED ON Y FORCES ONLY (METE).
(FORCES IN NON-GLOBAL DIRECTIONS WILL INVALIDATE RESULTS)

On
X = 0.300000731E+01
Y = -0.000000000E+00
Z = 0.500001133E+01
TOTAL APPLIED LOAD 1

***TOTAL APPLIED LOAD ( KN METE ) SUMMARY (LOADING 1 )

SUMMATION FORCE-X = 5.00

se
SUMMATION FORCE-Y = -120.00
SUMMATION FORCE-Z = -0.00

SUMMATION OF MOMENTS AROUND THE ORIGIN-

MX= 600.00 MY= 30.00 MZ= -360.00

TOTAL REACTION LOAD 1

cU
***TOTAL REACTION LOAD( KN METE ) SUMMARY (LOADING 1 )
SUMMATION FORCE-X = -5.00
SUMMATION FORCE-Y = 120.00
SUMMATION FORCE-Z = 0.00
mi

SUMMATION OF MOMENTS AROUND THE ORIGIN-

MX= -600.00 MY= -30.00 MZ= 360.00

MAXIMUM DISPLACEMENTS ( CM /RADIANS) (LOADING 1)

de

MAXIMUMS AT NODE
X = 4.02398E-03 1
Y = -2.17431E+00 4
Z = -4.38353E-04 13
RX= -6.50188E-03 2
ca

RY= -2.78902E-05 5
RZ= 6.94445E-04 1
rA

EXTERNAL AND INTERNAL JOINT LOAD SUMMARY ( KN METE )-

JT EXT FX/ EXT FY/ EXT FZ/ EXT MX/ EXT MY/ EXT MZ/
INT FX INT FY INT FZ INT MX INT MY INT MZ

SUPPORT=1
Fo

5 0.00 0.00 0.00 0.00 0.00 0.00

1.15 25.86 1.10 -0.00 -0.00 -0.00 111000

6 0.00 0.00 0.00 0.00 0.00 0.00

3.36 -171.72 -4.35 -360.00 -3.52 0.00 111111

10 0.00 0.00 0.00 0.00 0.00 0.00

0.49 25.86 3.26 -0.00 -0.00 -0.00 111000

C:\Users\divin\OneDrive\Desktop\New folder (2)\Structure1.anl Page 5 of 7

 21 March 2024 15:38

STAAD SPACE -- PAGE NO. 6

************ END OF DATA FROM INTERNAL STORAGE ************

80. START CONCRETE DESIGN

ly
CONCRETE DESIGN
81. CODE INDIAN
82. FC 20000 MEMB 1
83. FC 20000 MEMB 2
84. FC 20000 MEMB 3

On
85. FC 20000 MEMB 4
86. FC 20000 MEMB 5
87. FC 20000 MEMB 7
88. FC 20000 MEMB 8
89. FC 20000 MEMB 14
90. FC 20000 MEMB 15
91. FC 20000 MEMB 16

se
92. FC 20000 MEMB 17
93. FC 20000 MEMB 19
94. FYMAIN 500000 MEMB 1
95. FYMAIN 500000 MEMB 2
96. FYMAIN 500000 MEMB 3
97. FYMAIN 500000 MEMB 4
98. FYMAIN 500000 MEMB 5
cU
99. FYMAIN 500000 MEMB 7
100. FYMAIN 500000 MEMB 8
101. FYMAIN 500000 MEMB 14
102. FYMAIN 500000 MEMB 15
103. FYMAIN 500000 MEMB 16
mi
104. FYMAIN 500000 MEMB 17
105. FYMAIN 500000 MEMB 19
106. FYSEC 415000 MEMB 1
107. FYSEC 415000 MEMB 2
108. FYSEC 415000 MEMB 3
109. FYSEC 415000 MEMB 4
de

110. FYSEC 415000 MEMB 5

111. FYSEC 415000 MEMB 7
112. FYSEC 415000 MEMB 8
113. FYSEC 415000 MEMB 14
114. FYSEC 415000 MEMB 15
ca

115. FYSEC 415000 MEMB 16

116. FYSEC 415000 MEMB 17
117. FYSEC 415000 MEMB 19
118. END CONCRETE DESIGN
119. FINISH
rA
Fo

C:\Users\divin\OneDrive\Desktop\New folder (2)\Structure1.anl Page 6 of 7

 21 March 2024 15:38

STAAD SPACE -- PAGE NO. 7

*********** END OF THE STAAD.Pro RUN ***********

**** DATE= MAR 24,2024 TIME= 0:36: 6 ****

ly
************************************************************
* For technical assistance on STAAD.Pro, please visit *
* http://www.bentley.com/en/support/ *
* *
* Details about additional assistance from *

On
* Bentley and Partners can be found at program menu *
* Help->Technical Support *
* *
* Copyright (c) Bentley Systems, Inc. *
* http://www.bentley.com *
************************************************************

se
cU
mi
de
ca
rA
Fo

C:\Users\divin\OneDrive\Desktop\New folder (2)\Structure1.anl Page 7 of 7