RouterBOARD Feature Request
RouterBOARD Feature Request
• (Votes: 4) More slots & More watts! Instead of faster CPU's, more miniPCI slots and bigger voltage regulators.
We already got this to some degree with the newest revision of the RB532, but an even bigger model would be
nice. Something on the order of 8 slots, fully populated with XR cards.
• (Votes: 4) New routerboard Crossroads with 5G card / 300MHz cpu / 32MB RAM / L3 / 80usd
• (Votes: 3) Longer-term availability (non-obsolescence) e.g. RB112
• (Votes: 3) MPLS hardware acceleration (Use hardware ASIC instead of CPU)
• (Votes: 3) Routing hardware acceleration (Use hardware ASIC instead of CPU)
• (Votes: 3) A 12 and 24 port RouterBoard for Layer3 switch use.
• (Votes: 3) Long Term Support, more hardware revisions instead of new models.
• (Votes: 2) API in RB250GS.
• (Votes: 2) "Market change." Integrating ports mini pci express that they are more efficient
• (Votes: 2) Documentation about the mini-ups in board connector and how it works (ie: rb230), package ups with
support it.
• (Votes: 2) Additional (i.e. 2) async serial interfaces
• (Votes: 2) SNMP-TRAP Support would by nice for Receiving events with NET-SNMP's trapd
• (Votes: 2) 5 to 10 binary inputs (maybe a few that detect a break in continuity and a few that detect when voltage
goes high) (MERGE with I2C bus at top, it's the same request)
• (Votes: 2) 4 x 8 bit value input headers (to industry standard data acquisition specifications)
• (Votes: 2) 2 x ( 16 bit value input headers (again, to industry standard data acquisition specs)
• (Votes: 4) Daughterboard with telephony interfaces (preferably Digium compatible)
• (Votes: 1) Users Manual for RB1000
• (Votes: 2) Support for ERICSSON F3507g mini-pci express card
• (Votes: 1) a small micro-SD slot for RB750, an extra storage for a small useful device.
• (Votes: 1) Routerboard specifically for routing (e.g. rb1000) with one or more ports SATA for store proxy-cache
• (Votes: 1) Sound interface (AC97 ? on main or daughterboard) (used for telephony, tone for alignment or other
VOIP applications)
• (Votes: 1) MetaRouter on RB600(A)
• (Votes: 1) IGMP Proxy support in RB250GS.
• (Votes: 3) Have the capability of a built in adsl+ cablemodem with automatic traffic shaping+wifi (G+N
protocol)+1Gbit ports
• (Votes: 1) Support for NAT64 and DNS64
• (Votes: 1) Introducing Events as triggers for running the scripts
• (Votes: 1) Ability to add custom fields in WinBox Loader and an Export/Import addressbook button for easyer
transfer of connections
• (Votes: 0) A digital input/output(tamper switch)
• (Votes: 0) SNMP direct SMS reporting to admin about problems with network. (SIM Card slot with sms service)
• (Votes: 0) Part time working with polling / without polling - to be able to connect mikrotik clients with polling
and Nstream and other devices without this features.
• (Votes: 24) Make all boards 48vdc so we do not need different PSU all the time ie RB532 (48v) vs RB333 (24V)
this request is irrelevant now that all new models are the same voltage
RouterBOARD Feature Request 3
• (Votes: 11) Pins with 5v (or other voltage) that can on/off with routeros e.g. on/off a relay of alarm or domo
applications use the Fan headers or user LED connections
• (Votes: 8) FCC approval of Routerboard (rb433 appears to be approved, haven't bought much other new model
variety)
• (Votes: 6) Routerboard that support 3G, HSDPA, UMTS - with mini-PCI
• (Votes: 2) 802.11n support Done!
• (Votes: 13) USB connector in new RBs for GSM EDGE/UMTS modems done! RouterBOARD 433UAH is
available with 2 USB ports
• (Votes: 5) MMCX connector for the R52H Done!
• (Votes: 3) non-Pacwireless outdoor cases There are Lots of Companies Making Cases for RouterBoard based
products
(Check Out are Made for MikroTik Page on the main site.)
• (Votes: 1) Gigabit Ethernet for RB411 and Newer Model Boards. Done : RB450G - I disagree. RB411 is not
RB450G. This vote was mainly about RB411 series boards.
Note: **Only one vote per user** Don't abuse the Wiki !
Please provide links to provide further detail on your request.
Article Sources and Contributors 4