NetNumenU31 GPON NBI

Reference Manual for TL1

V1.1

ZTE CORPORATION
NO. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057
Tel: +86-755-26771900
Fax: +86-755-26770801
URL: http://ensupport.zte.com.cn
E-mail: [email protected]
LEGAL INFORMATION
Copyright © 2011 ZTE CORPORATION.
The contents of this document are protected by copyright laws and international treaties. Any reproduction or
distribution of this document or any portion of this document, in any form by any means, without the prior written
consent of ZTE CORPORATION is prohibited. Additionally, the contents of this document are protected by
contractual confidentiality obligations.
All company, brand and product names are trade or service marks, or registered trade or service marks, of ZTE
CORPORATION or of their respective owners.
This document is provided “as is”, and all express, implied, or statutory warranties, representations or conditions
are disclaimed, including without limitation any implied warranty of merchantability, fitness for a particular purpose,
title or non-infringement. ZTE CORPORATION and its licensors shall not be liable for damages resulting from the
use of or reliance on the information contained herein.
ZTE CORPORATION or its licensors may have current or pending intellectual property rights or applications
covering the subject matter of this document. Except as expressly provided in any written license between ZTE
CORPORATION and its licensee, the user of this document shall not acquire any license to the subject matter
herein.
ZTE CORPORATION reserves the right to upgrade or make technical change to this product without further notice.
Users may visit ZTE technical support website http://ensupport.zte.com.cn to inquire related information.
The ultimate right to interpret this product resides in ZTE CORPORATION.

Revision History

REVISION NO. REVISION DATE REVISION REASON

V1.0 29–04–2016 Published Version

V1.1 07–01–2017 Add some new commands.

Publishing Date: 07-01-2017

Contents
Chapter 1 Document Overview ................................................................. 1-1
1.1 Purpose............................................................................................................. 1-1
1.2 Scope................................................................................................................ 1-1

Chapter 2 TL1 Interface Overview............................................................. 2-1

Chapter 3 Important Notice ....................................................................... 3-1
3.1 Requests on TL1 Compatibility............................................................................ 3-1
3.2 Concurrent Operations to NE .............................................................................. 3-2
3.3 Error Code......................................................................................................... 3-2
3.4 Synchronization Alarm........................................................................................ 3-2

Chapter 4 TL1 Protocol .............................................................................. 4-1

4.1 Communication Protocol..................................................................................... 4-1
4.2 Command Format .............................................................................................. 4-2
4.2.1 Syntactical Operators ............................................................................... 4-2
4.2.2 TL1 Command Syntax Overview ............................................................... 4-3
4.2.3 Debug and Test TL1 ................................................................................. 4-7

Chapter 5 Unified Error Code Defination ................................................. 5-1

Chapter 6 NE Type Series Description ..................................................... 6-1
Chapter 7 TL1 Command Description ...................................................... 7-1
7.1 Service Provisioning .......................................................................................... 7-1
7.1.1 ADD-ONU【Add ONU】 ....................................................................... 7-1
7.1.2 CFG-ONU【Modify ONU Authorization Information】 ............................... 7-4
7.1.3 DEL-ONU【Delete ONU】 .................................................................... 7-7
7.1.4 CRT-SERVICEPORT【Create Service Port】 .......................................... 7-9
7.1.5 CHG-SERVICEPORT【Change Service Port】 ......................................7-23
7.1.6 DLT-SERVICEPORT【Delete Service Port】 ..........................................7-27
7.1.7 BND-PORT-MVLAN【Bind Port to MVLAN】..........................................7-30
7.1.8 UBND-PORT-MVLAN【Unbind Port from MVLAN】 ................................7-33
7.1.9 CHG-PORTQOS-TRAFFICPRF【Modify Port QoS Traffic Profile】...........7-37
7.1.10 DLT-PORTQOS-TRAFFICPRF【Delete Port QoS Traffic Profile】 ..........7-40
7.1.11 CHG-PORT-MAXLEARNTMAC【Change Port Maximum Number of
Learnt MAC Addresses】 ....................................................................7-44
7.1.12 CHG-PORTLOCATING【Change Port Identification】 ...........................7-48
7.1.13 CHG-PORT-DHCP【Modify port of DHCP】 .........................................7-54

I
7.1.14 CHG-PORT-PPPOEPLUS【Modify Port PPPoE Plus Information】 ........7-59
7.1.15 CHG-ONUVOIPIP【Change ONU VoIP IP】 ........................................7-63
7.1.16 DLT-ONUVOIPIP【Delete ONU VoIP IP Configuration】 ........................7-67
7.1.17 CRT-ONUSIPUSER【Create ONU SIP User】 .....................................7-69
7.1.18 DLT-ONUSIPUSER【Delete ONU SIP User】 ......................................7-72
7.1.19 CHG-ONU-STAT-PON【Change ONU Administrative Status】 ...............7-74
7.1.20 RST-ONU-PON【Restart ONU】 ........................................................7-76
7.1.21 ACT-LANPORT【Activate LAN Port】..................................................7-78
7.1.22 DACT-LANPORT【Deactivate LAN Port】 ...........................................7-79
7.1.23 ACT-VOIPPORT【Activate VoIP Port】................................................7-81
7.1.24 DACT-VOIPPORT【Deactivate VoIP Port】 .........................................7-83
7.1.25 CHG-ONUWANIP【Change WAN IP configuration】 .............................7-85
7.1.26 DLT-ONUWANIP【Delete WAN IP Configuration】................................7-91
7.1.27 CHG-ONUWAN【Change WAN configuration】 ....................................7-94
7.1.28 DLT-ONUWAN【Delete WAN configuration】 .......................................7-97
7.1.29 CRT-ONU-GEMPORT【Create ONU GEM Port】 .................................7-99
7.1.30 DLT-ONU-GEMPORT【Delete ONU GEM Port】 ................................ 7-102
7.1.31 CRT-ONU-MVLAN【Create ONU MVLAN】 ....................................... 7-104
7.1.32 DLT-ONU-MVLAN【Delete ONU MVLAN】 ....................................... 7-107
7.1.33 CRT-ONU-PPPOE【Create ONU PPPoE】........................................ 7-109
7.1.34 CRT-ONU-SERVICE【Create ONU Service】 ................................... 7-112
7.1.35 DLT-ONU-SERVICE【Delete ONU Service】 ..................................... 7-115
7.1.36 CRT-ONU-STATICROUTE【Create ONU Static Route】 ..................... 7-118
7.1.37 CRT-ONU-TCONT【Create ONU T-CONT】 ...................................... 7-121
7.1.38 DLT-ONU-TCONT【Delete ONU T-CONT】 ....................................... 7-123
7.1.39 CRT-ONU-GEMPORT【Create ONU GEM Port】 ............................... 7-126
7.1.40 DLT-ONU-GEMPORT【Delete ONU GEM Port】 ................................ 7-129
7.1.41 CRT-ONU-VPORTGEMPORTMAPPING【Create ONU VPort and
GEM Port Mapping】 ........................................................................ 7-131
7.1.42 CRT-ONUPORT-EXTENDEDVLANRULE【Create ONU Port Extended
VLAN Rule】 ................................................................................... 7-134
7.1.43 CRT-ONUPORT-EXTENDEDVLAN【Create ONU Port Extended
VLAN】 ........................................................................................... 7-136
7.1.44 CRT-ONUPORT-IGMP【Create ONU Port IGMP】 ............................. 7-138
7.1.45 DLT-ONUPORT-IGMP【Delete ONU Port IGMP】 .............................. 7-141
7.1.46 CRT-ONUPORT-VLANTRANSLATION【Create ONU Port VLAN
Translation】.................................................................................... 7-144

II
7.1.47 DLT-ONUPORT-VLANTRANSLATION【Delete ONU Port VLAN
Translation】.................................................................................... 7-147
7.1.48 CHG-ONU-BRGPORT【Change ONU Bridge Port】 .......................... 7-149
7.1.49 CHG-ONU-TARGETSTAT【Change ONU Target Status】 ................... 7-151
7.1.50 CHG-ONU-VIDEOANI【Change ONU Video ANI Configuration】 ......... 7-153
7.1.51 CHG-ONU-VPORT【Change ONU VPort】 ....................................... 7-156
7.1.52 CHG-ONUGEMPORT-QOS【Change ONU GEM Port QoS】 .............. 7-158
7.1.53 CHG-ONUPORT-VLAN【Change ONU Port VLAN】.......................... 7-160
7.1.54 CHG-ONUVIDEOPORT【Change ONU Video Port】 .......................... 7-163
7.1.55 CHG-ONU-VOIP【Change ONU VoIP】 ............................................ 7-165
7.1.56 CLR-ONU-CONFDATA【Clear ONU Configuration Data】 ................... 7-170
7.1.57 BND-ONU-DHCPSERVERPROFILE【Bind DHCP Server Profile to
ONU】 ............................................................................................ 7-172
7.1.58 UBND-ONU-DHCPSERVERPROFILE【Unbind DHCP Server Profile
from ONU】 ..................................................................................... 7-174
7.1.59 BND-ALARMPROFILE【Bind Alarm Profile】 ..................................... 7-176
7.1.60 UBND-ALARMPROFILE【Unbind Alarm Profile】 ............................... 7-180
7.1.61 UBND-ONUPORT-VLAN【Unbind VLAN from ONU Port】 ................. 7-183
7.1.62 BND-ONUPORT-VLAN【Bind ONU Port to VLAN】 ........................... 7-186
7.1.63 CHG-BOARD-ROGUEONUDETECT【Change Rogue ONU Detecting
Configuration】 ................................................................................ 7-188
7.1.64 CHG-ONU-ACS【Change ONU ACS】.............................................. 7-190
7.1.65 CHG-ONU-ETHPORT【Change ONU Ethernet Port】........................ 7-194
7.1.66 CHG-ONU-IPV4IPHOST【Change ONU IPv4 IP Host
Configuration】 ................................................................................ 7-197
7.1.67 CHG-ONU-VEIP【Change ONU VEIP】 ........................................... 7-200
7.1.68 CHG-ONUPORT-MVLANTAGMODE【Change ONU Port MVLAN
Tag】 .............................................................................................. 7-203
7.1.69 CHG-ONUPORT-PACKETFILTER【Change ONU Port Packet
Filter】 ............................................................................................ 7-205
7.1.70 BND-ONU-ONUPROFILE【Bind ONU Profile to ONU】 ...................... 7-208
7.1.71 UBND-ONU-ONUPROFILE【Unbind ONU Profile from ONU】............. 7-211
7.1.72 RESTORE-ONUFACTORYCONF【Restore ONU Factory
Settings】........................................................................................ 7-213
7.1.73 CHG-ONUUNI-PON【Change ONU UNI Configuration】..................... 7-215
7.1.74 UPDATE-ONU-SOFTWARE【Update ONU Software】 ....................... 7-220
7.1.75 CHG-ONUWIFI【Change ONU WiFi configuration】 ........................... 7-222
7.1.76 CHG-ONUWIFISSID【Change WiFi SSID】 ....................................... 7-226
7.1.77 CRT-ONU-MGCUSER【Create ONU MGC User】.............................. 7-232

III
 7.1.78 DLT-ONU-MGCUSER【Delete ONU MGC User】............................... 7-235
7.1.79 DLT-ONU-STATICROUTE【Delete ONU Static Route】...................... 7-238
7.1.80 CRT-ONU-TCONTBWPROFILE【Create ONU TCONT Bandwidth
Profile】 .......................................................................................... 7-240
7.1.81 DLT-ONU-TCONTBWPROFILE【Delete ONU TCONT Bandwidth
Profile】 .......................................................................................... 7-245
7.1.82 CRT-ONU-WANIP【Create ONU WAN IP】 ....................................... 7-247
7.1.83 CRT-ONUPROFILE【Create ONU Profile】 ....................................... 7-252
7.1.84 DLT-ONUPROFILE【Delete ONU Profile】 ........................................ 7-254
7.1.85 CHG-ONU-DMZ【Change ONU Demilitarized Zone】 ......................... 7-256
7.1.86 CHG-ONU-UPNP【Change ONU UPnP Configuration】 ..................... 7-258
7.1.87 CRT-ONU-PORTFORWARD【Create ONU Port Forward】 ................. 7-260
7.1.88 DLT-ONU-PORTFORWARD【Delete ONU Port Forward】 .................. 7-263
7.1.89 CHG-ONU-PON【Change ONU Configuration】................................. 7-265
7.2 Resource and Query ......................................................................................7-269
7.2.1 LST-DEVINFO【Query Device Information】........................................ 7-269
7.2.2 LST-BRDINFO【Query Board Information】......................................... 7-272
7.2.3 LST-OLTATTR-PON【Query PON Port Attributes】............................... 7-275
7.2.4 LST-ONU【Query ONU Information】 ................................................. 7-278
7.2.5 LST-ONUSTATE【Query ONU State】 ................................................ 7-285
7.2.6 LST-SERVICEPORT【List Service Port】 ............................................ 7-289
7.2.7 LST-PORTQOS-PRIPRF【List Port QoS Priority Profile】 ..................... 7-295
7.2.8 LST-PORT-MAXLEARNTMAC【Query Port Maximum Number of Learnt
MAC Addresses】 ............................................................................ 7-299
7.2.9 LST-PORTQOS-TRAFFICPRF【Retrieve Port QoS Traffic Profile】........ 7-303
7.2.10 LST-ONUTCONT【Query ONU TCONT Configuration】...................... 7-308
7.2.11 LST-ONUCFG【Query ONU Configuration Information】 ..................... 7-312
7.2.12 LST-OMDDM【Query Optical Module DDM Information】 .................... 7-315
7.2.13 LST-LANPORT【Query LAN Port Information】 .................................. 7-323
7.2.14 LST-LANPERF【Query LAN Port Performance】 ................................ 7-329
7.2.15 LST-PONPERF【Query PON Link Performance】 .............................. 7-333
7.2.16 LST-UNREGONU【Query Unregistered ONU Status Information】 ....... 7-338
7.2.17 LST-ONU-SERVICE【Query ONU Service Configuration】 .................. 7-344
7.2.18 LST-ONU-VIDEOANI【Query ONU Video ANI Configuration】 ............. 7-347
7.2.19 LST-ONU-VLANTRANSLATION【Query ONU VLAN Translation】 ....... 7-351
7.2.20 LST-ONU-VPORT【Query ONU VPort Configuration】........................ 7-354
7.2.21 LST-ONU-VPORTGEMPORTMAPPING【Query ONU VPort and GEM
Port Mapping】 ................................................................................ 7-357

IV
 7.2.22 LST-ONUGEMPORT【Query ONU GEM Port Configuration】 ............. 7-359
7.2.23 LST-ONU-SIPUSER【Query the Information of ONU SIP User】 .......... 7-363
7.2.24 LST-ONUPORT-VLAN【Query ONU Port VLAN】 .............................. 7-368
7.2.25 LST-ONU-EXTENDEDVLAN【Query ONU Extended VLAN
Configuration】 ................................................................................ 7-372
7.2.26 LST-ONU-EXTENDEDVLANRULE【Query ONU Extended VLAN Rule
Configuration】 ................................................................................ 7-376
7.2.27 LST-ONU-VOIP【Query ONU VoIP Configuration】 ............................ 7-380
7.2.28 LST-ONU-VOIPIP【Query ONU VoIP IP Configuration】 ..................... 7-386
7.2.29 LST-ONU-IPV4IPHOST【Query ONU IPv4 IP Host】 .......................... 7-394
7.2.30 LST-OLTMACADDRESS【Query OLT Learnt MAC Address】 ............. 7-398
7.2.31 LST-PORTMACADDRESS【List Mac address of ONU UNI】............... 7-402
7.2.32 LST-VLANID【List VLAN ID】........................................................... 7-408
7.2.33 LST-ONU-ONUPROFILE【Query ONU Profile of ONU Binding】 ......... 7-410
7.2.34 LST-ONUPROFILE【Query ONU Profile】 ......................................... 7-413
7.2.35 LST-ONUWANIP【Query ONU WAN IP】 .......................................... 7-416
7.2.36 LST-ONU-VOIPLINESTAT【Query ONU VoIP Line Status】 ................ 7-420
7.2.37 LST-ONUUNI-PON【List ONU UNI Information】 ............................... 7-425
7.2.38 LST-ONU-DETAIL【Query ONU Detail】 ........................................... 7-428
7.2.39 LST-VLANID-TTP【List VLAN ID】 ................................................... 7-435
7.2.40 LST-ONU-WIFI【Query ONU WiFi】 ................................................. 7-439
7.2.41 LST-ONU-WIFISSID【Query ONU WiFi SSID】.................................. 7-443
7.2.42 LST-TCONTBWPROFILE【Query TCONT Bandwidth Profile】 ............ 7-448
7.2.43 LST-ONUSIPPROFILE【Query ONU SIP Profile】.............................. 7-451
7.2.44 LST-ONUTYPEPROFILE【Query ONU Type Profile Information】........ 7-456
7.3 Alarm .............................................................................................................7-461
7.3.1 LST-ALARM【List Alarms】 ............................................................... 7-461
7.4 System ...........................................................................................................7-465
7.4.1 LOGIN【Login EMS】 ....................................................................... 7-465
7.4.2 LOGOUT【Logout EMS】 .................................................................. 7-466
7.4.3 SHAKEHAND【Shakehand Command】 ............................................. 7-467

V
 Chapter 1
Document Overview
Table of Contents
Purpose .....................................................................................................................1-1
Scope.........................................................................................................................1-1

1.1 Purpose
This document describes how to use TL1 northbound interface (NBI) of Network Element
Management System(EMS) NetNumenU31 for ZTE's access network equipment. The
partner management system can use this interface to integrate with NetNumenU31.

1.2 Scope
This document describes TL1 NBI, including the usage, protocol, functionalities and details
about TL1 command for network element (NE) management. But this document doesn't
describe details of TL1 protocol and communication technology.

1-1

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 2
TL1 Interface Overview
NBI of NetNumenU31 is a important interface to communicate between NetNumenU31
and OSS. OSS will implement provisioning, operation, monitoring, assurance and
inventory management via NBI. Transaction Language 1 (TL1) interface is string-based
and human-readable, which can be rapidly developed and easily updated. Especially,
there is no special decoders are needed for TL1 debugging, and new messages can
be added to TL1 command with minimal effort. It is the most widely used management
protocol in telecommunications networks. TL1 facilitates communication between TL1
agent in NetNumenU31, and a TL1 client. The TL1 agent on NetNumenU31 provides
access to data stored on equipment and database of EMS. The TL1 client uses this
access to monitor and control the equipment. TL1 protocol communicates via TCP. Data
(TL1 Messages) is sent and received in the form of byte stream.

2-1

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 3
Important Notice
Table of Contents
Requests on TL1 Compatibility...................................................................................3-1
Concurrent Operations to NE .....................................................................................3-2
Error Code .................................................................................................................3-2
Synchronization Alarm ...............................................................................................3-2

3.1 Requests on TL1 Compatibility

With the development of network management, TL1 commands will be extended. Then,
it's extremely necessary to consider the compatibility of TL1 command. We try to give
the result of command in a style of table, which will show the name of each field firstly.
So, even though the format of the TL1 command response result changed following after
version changing, that would facilitate the TL1 client to find the associated column the
specified data located according to the position of field, and then to analyze them. This
kind of self-adaptive feature is very convenient for TL1 client to realize compatibility.
In addition, the delimiter that separate two fields in the output result can be configured in
NetNumenU31, eg. two continuous space characters or a TAB key.
The following gives an example about the changed TL1 output information:
Now
Take the output information about LST-DEVRACK command as an example:
List of All Racks Info
—————————————————–
DID DNAME RID NAME TYPE STATUS SHELFNUM
10.61.94.33 ZXDSL8220v3.x 1 Dslam Rack ZXDSL8220v3.x Up 1
—————————————————–
Later
The output information will change as following:
List of All Racks Info
—————————————————–
DID RID DNAME NAME TYPE STATUS SHELFNUM ALARM
10.61.94.33 1 ZXDSL8220v3.x Dslam Rack ZXDSL8220v3.x Up 1 ENV
—————————————————–

3-1

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 3 Important Notice

Please pay attention to the change of RID field position and the new-added ALARM field.
In this case, the TL1 client should be self-adaptive to these changes.

3.2 Concurrent Operations to NE

NetNumenU31 only supply the TL1 NBI, it doesn't control how to use it by the client. The
TL1 client could create concurrent service instances and send many commands to the
same NE at the same time; but this would result in some fails for some NEs, due to the NE
device configuration conflicts. So we don't suggest the TL1 client send many commands
to the same NE at the same time.

3.3 Error Code

Error code of the TL1 command may be changed, OSS should not decide business process
by the error code. If OSS already use the error code, Please test whether the error code
is changed before NetNumen U31 upgrading.

3.4 Synchronization Alarm

Dispose the alarm should be as qickly as possible when in the synchronization alarm
operation, which would be block the alarm sender if not quickly enough. Keep the receiving
alarm in a cache, and another thread dispose the alarm get from the cache should be
efficient, which is strongly recommend.

3-2

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 4
TL1 Protocol
Table of Contents
Communication Protocol ............................................................................................4-1
Command Format ......................................................................................................4-2

4.1 Communication Protocol

l Communication Protocol
Transaction Language -1 (TL1) defined by Telcordia(formerly Bellcore). It is the most
widely used management protocol in telecommunications networks. Because showed in
text format, it is very understandable for developers and operators without the help of
complicated debugging and protocol analyzer. Furthermore, TL1 supports active alarm
reporting, which will report the performance, alarm and other user-interested events to
users actively and real time so as to monitor the operational status of EMS and NE.
TL1 Northbound interface of NetNumen is a kind of application-layer protocol running on
TCP protocol. Through the Sockets based on TCP/IP, it can be used to send or respond
command between the module of Northbound interface and upper-layer system.

NetNumenU31 TL1 supports connection based on SSH in order to enhance the security
of communication.
l Communication Module

4-1

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 4 TL1 Protocol

Before sending TL1 command, the OSS needs to built a connection with the TCP of
NetNumenU31 TL1 interface module (ZTE TL1 Agent) through SOCKET. The default
TL1 service port of ZTE TL1 Agent is 9819-9833 and the default SSH service port is
8819-8833.
l Session Control
The maximum of TL1 connection that can support simultaneously is 50.
l Running Efficiency
Generally, it needs 1-10 sec to run a single TL1 command. In case of large scale network
management, the OSS should build multi TL1 connections to send TL1 command
concurrently so as to improve the running efficiency of TL1 command.

4.2 Command Format

4.2.1 Syntactical Operators
Table 1 Syntactical Operators

Index Symbol Description Example

1 <> Encapsulate an identification <int-num> means to input an

integer

2 [] Encapsulate an symbol or message a[b]c means that b is optional.

3 '' Encapsulate an alphabet 'a' means the English character a

not a variable identification.

4 () Encapsulate several symbols and could

be used with * and +.

5 * Suffix, meaning the content in round a(bc)* means a or abc or abcbc

brackets could be showed for several etc.
times or never be showed.

6 + Suffix, meaning the content in round a(bc) + means abc or abcbc etc.
brackets could be showed for one or more
times.

7 ^ Space character

8 cr Enter key

9 1f Change line

10 | Choose one of the items from several a|b|c means to choose one from a,
items separated by this kind of symbol. b and c.

4-2

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

11 ::= Separate two different block messages. Such as <digit> ::= (0|1|...|9) ,
meaning the value of <digit>
should be one of the integer
coming from 0 to 9 (here, including
0 and 9).

4.2.2 TL1 Command Syntax Overview

4.2.2.1 TL1 Command Syntax
Any request from an OSS is considered a TL1 command. The general structure of a TL1
command is:
<command_code>:<staging_parameter_blocks>:<message_payload_block>;
·Command Code
It determines the action to be taken at the NetNumenU31 as a result of receiving the input
message. Each command must begin with a command code consisting of a mandatory
verb followed by up to two optional identifiers, each separated by hyphen.
·Staging Parameter Block
These are a series of four data blocks following the command code that provide info to
establish and uniquely identify an object entity within an NetNumen to be managed by the
TL1 client and to specify certain options as to how the input command is to be executed in
the NetNumenU31. The structure of the staging parameter blocks consists of the following
series:
:[<target identifier>]:<access identifier(s)>:<correlation tag>:[<general block>]:
Each block may have one or more specifically defined parameters. The parameters within
each staging block may either be position-defined or name-defined.
·Message Payload Block
This block indicates the subject matter of the message. This section may consists of zero
or more data blocks in the form:
(:<Px>(,<Px>)*)*;
Here Px represents a data item. Each data block is delimited by colons (:) and the last
terminated by a semicolon (;). Each data block may have an unlimited number of data
items, each delimited by commas (,). The data items within a data block may be either
name-defined (<keyword>=<value>) or position-defined where values are specified and
the keyword is implied by its position in the data block.

4.2.2.2 Output Response Messages

A TL1 output response message is the response to a TL1 input command. The general
structure of a TL1 output response message is :

4-3

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 4 TL1 Protocol

<header> <response identification> [<text block>] <termination>

which consists of a optional text block and all the other blocks are essential.
·Header
The Header represents information to all output response.
<cr><lf><lf>^^^<sid>^<year>-<month>-<day>^<hour>:<minute>:<second>
It contains System identifier <sid>, date and time stamps.
<sid> is restricted to 20 characters maximum and identifies the NE generating the
message. The syntax of <sid> is any TL1 identifier or text string.
The <year><month><day> construct represent the day in which the output response is
generated.
The <hour><minute> <second> construct represent the time at which the output response
is generated.
·Response Identification
The form of the response identification is :
<cr><lf>M^^<ctag>^<completion code>
This construct consists of three components namely the character M, a correlation Tag
and a completion code.
The character M signifies that the message is the response to the input command.
The <ctag> must be the same as that of the input message to associate the response with
the proper input command.
The <completion code> acknowledges the completion of the input command as COMPLD
to indicate the successful completion of the command, DENY to indicate that the system
could not execute the command, or PRTL to indicate that the system was not able
to process the command for some of the object entities. Partial responses include a
description of the problem the system encountered while attempting to execute the
command
·Text Block
The optional [<text block>] is used to represent information specific to the particular
autonomous message. The format of the text block is as follows :
((<cr><lf>^^^<EN=error-code>^^^<ENDESC=error-description>) |
(<cr><lf>^^^<quotedline>))
Here:
EN=error-code
The error code identifying the fault condition of command, such as IDNE, which indicates
that the input parameter error - the device does not exist.
ENDESC=error-description
The error description for the fault, such as 'device operation failed'.

4-4

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

quotedline
The quoted line consists of parsable text and shall be preceded and followed by double
quotes.
The famat is :
< totalrecord =total-count><cr><lf><result>
Here, result is :
<cr><lf><title><cr><lf>(<->*)<cr><lf>(<attribs>((<values>)*))(<->*)<cr><lf><cr><lf>
-attribs::=<attrib>((^^<attrib>)*)<cr><lf>
-values::=<value>((^^<value>)*)<cr><lf>
·Terminator
The form of the terminator is :
<cr><lf>( ; | > )
The terminator is represented by either the semicolon (;) character or the greater than
(>) character. The semicolon (;) character is used to indicate the termination of the output
response message. The greater than (>) character is used to indicate that more output
associated with this response will follow under another header.
Since the size of the output message should not exceed 4096 bytes, it is important to
split the response into blocks with the same Ctag. The (>) terminator is also used for
intermediate responses in a timed measurement series.

4.2.2.3 Example
Function: Retrieve all NEs from EMS.
Command Format:
LST-DEV::[ (DID=device-id)| (DIP=device-IP)|(DNAME=device-name)]:CTAG::;
Here:
LST-DEV is command name.
DID, DIP and DNAME are three different optional parameters. When there is no any
message input in this parameter item, all of the equipment information will be returned.
Input:
LST-DEV:::5::;
Response:
736 2004-04-01 10:55:49
M 1 COMPLD
EN=0 ENDESC=No error
totalrecord =2
List of All Device Info

4-5

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 4 TL1 Protocol

————————————-
DID DIP DNAME DTYPE STATUS LOCATION
10.71.47.30 10.71.47.30 TEST ZXDSL9210 Up root.Shanghai.Pudong.Zhangjiang
10.71.47.31 10.71.47.31 TEST2 ZXDSL9210 Down root.Shanghai.Xinming
————————————-
Note:

This command tries to inquire all of the NE information. That is why there is no any
parameter input.

4-6

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

4.2.3 Debug and Test TL1

TL1 session can be created via a Telnet connection in order to debug and test a TL1
command rapidly. It is very easy, that is, create a telnet connection to TL1 agent firstly, and
then input command according to TL1 syntax, at last, click ENTER key to send command
to TL1 agent.

4-7

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 4 TL1 Protocol

The example of procedure is as follows (Windows):

Assum that TL1 service IP of NetNumenU31 is 10.61.94.3 and service port is 9803, then
operate procedure is :
Create a telnet connection
a)Select Start > Run.
b)Enter cmd in the Run prompt box, and click OK.
c)At the DOS command prompt type:
telnet <TL1 service ip address > <port number> and press Enter.
That is :
telnet 10.61.94.3 9830
Excute TL1 command
d)Type or copy a TL1 command to open a TL1 session
Then the result of the command will be shown in DOS window.The example of a command
and its response result is as following figure.
Figure 1 The command example

Tips:

If you find that the DOS window can't display the response result of TL1 command, then
you can configure the DOS window to echo mode to resolve this problem.

4-8

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

The procedure is as follows:

a)Select Start > Run.
b)Enter regedit in the Run prompt box, and click OK.
c)Search item DebugFlags in [HKEY_CURRENT_USER\Software\Microsoft\Telnet]
d)Set value of DebugFlags to 0x00000010(16)
e)Open DOS window again to try TL1 command.

4-9

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 5
Unified Error Code Defination
An error code is a four-character mnemonic device in the response of an input command
describing why the command cannot be executed. Error codes are grouped into the
following categories:
Ixxx: Input

Dxxx: Device
Exxx: Exception
Sxxx: System
Axxx: Authentication
Txxx: Test

Error Code Error Type Error Description

IRC INPUT resource conflict

IDNE INPUT device does not exist

IRNE INPUT resource does not exist

IANE INPUT alarm does not exist

IMP INPUT missing parameter

IIPF INPUT invalid parameter format

IIPE INPUT input parameter error

IRE INPUT resource has existed

DDNS DEVICE device may not support this operation

DDOF DEVICE device operation failed

DDB DEVICE device is busy

SENS SYSTEM EMS may not support this operation

SSOF SYSTEM system operation failed

EEH EXCEPTION exception happens

IIAC EXCEPTION invalid AID

5-1

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 6
NE Type Series Description
NE Type Series NE Type

C300M Series C300M/C350M/MSG6000/MSG6020

C300Mv4 Series C300Mv4/C350Mv4

DSL Series ZXDSL8220V3/ZXDSL9210/ZXDSL9800/ZXDSL9803/ZXDSL9800V3/ZXDS-

L9803V3/ZXDSL9806H/ZXDSL9806I/ZXDSL9812/ZXDSL9816/ZXDSL9836/Z-
XDSL9856/ZXA10 9806V/ZXA10 9818/ZXA10 9819G/ZXA10 9836V/ZXA10
9852G/ZXA10 9852V

xDSL-MDU ZXDSL9806H/ZXDSL9806I/ZXDSL9812/ZXDSL9816/ZXDSL9836/ZXDSL9856/
Series ZXA10 9806V/ZXA10 9818/ZXA10 9836V/ZXA10 9852V

G.fast-MDU ZXA10 9819G/ZXA10 9852G

Series

LAN-MDU F402/F802/F803/F803V1/F803V3/F803G-8/F803-8/F803G-16/F803-
Series 16/F804/F805/F805PB/F806PB/F809/F821/F822/F822B/F822P/F823/F823P/F-
829/F822P/F832/F833/F839

F82x Series F820/F821/F822/F823/F829/F822P/F803V3/F809

(Deprecated)

C300 Series C300/C320v1.2

C300v2 Series C300v2/C320v2/C350v2

C300v3 Series C300v3.0/C320v3.0/C350v3

6-1

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7
TL1 Command Description
Table of Contents
Service Provisioning ..................................................................................................7-1
Resource and Query .............................................................................................7-269
Alarm .....................................................................................................................7-461
System...................................................................................................................7-465

7.1 Service Provisioning

【Add ONU】
7.1.1 ADD-ONU【 】
l Description
This command could be used for adding ONU.
l Applicable NE

NE Category NE Type Notes

PON OLT C220v1.1/C220v1.2/C300 Series/C300v2 Series/C300v3

Series

PON ONU F820/LAN-MDU Series/xDSL-MDU Series/FTTH ONU

l Command Format
ADD-ONU::OLTID=olt-name,PONID=ponport_location:CTAG::[AUTHTYPE=auth-type],
ONUID=onu-index[,PWD=onu-password][,ONUNO=onu-no]
[,RID=rid][,HEXPWD=hex-password][,NAME=name]
[,DESC=onu description],ONUTYPE=onu-type[,SPLITTERID=id]；
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

OLTID String SIZE(128) OLT IP address or Required

name, ID

7-1

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

PONID String SIZE(128) PON Port location Required

Rack-Shelf- information, located by
Slot-PON Port Rack-Shelf-Slot-PON
Number Port, NA means
nothing

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

AUTHTYPE String MAC Authorization Mode, Optional

LOID default as LOID
LOIDONCEON
SN
SNONCEON
PASSWORD
PWDONCEON
RID
SNRID
HEXPASSWORD
SNPWD

ONUID String SIZE(64) Authorization Required

Information;
If the authorization
mode for AUTHTYPE
is MAC, then ONUID
means MAC address;
If the authorization
mode for AUTHTYPE
is LOID, then ONUID
means LOID;
If the authorization
mode for AUTHTYPE
is PASSWORD,
then ONUID means
PASSWORD;
If the authorization
mode for AUTHTYPE
is RID, then ONUID
means RID;
If the authorization
mode for AUTHTYPE
is HEXPASSWORD,

7-2

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

then ONUID means

hex password.
If the authorization
mode for AUTHTYPE is
SNPWD, then ONUID
means SN+password,
for example,
ZTEG10000251/xdn.

PWD String SIZE(128) LOID PASSWORD Optional

ONUNO Integer 1-512 ONU authorization Optional

number

NAME String SIZE(128) ONU Name Optional

DESC String SIZE(64) ONU description; Optional

When it is necessary
to keep NMS and
equipment description
the same, the
description field cannot
be Chinese characters.

ONUTYPE String SIZE(32) ONU type Required

SPLIT- String SIZE(32) Optical splitter ID Optional

TERID

RID String SIZE(36) Register ID Optional

If the authorization
mode for AUTHTYPE
is SNRID, then ONUID
means SN and RID
means RID.

HEXPWD String SIZE(14) Hex Password Optional

l Response Format

Refer to Section 4.2.2.2 for detailed TL1 command response format.

l Response Parameters

None.
l Error Code

DDOF, IIPE

Refer to Chapter 5 Unified Error Code Definition for more details.

l Example

7-3

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

None.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

GPON If Authorization type is PASSWORD, the length of password is 10. The

OLT will cut off the password if it is over 10.

l Revision History

Revision Date Notes

2014–07–24 Add RID and SNRID

authorization type

NetNu- 2015–08–08 New Command Parameters:

menU31R20V12.15.20T95 HEXPWD
New Command Parameter
Values：HEXPASSWORD for
AUTHTYPE

【Modify ONU Authorization Information】

7.1.2 CFG-ONU【 】
l Description
This command is used for modifying ONU authorization information such as
authorization mode, authorization identification information, etc as changing ONU.
l Applicable NE

NE Category NE Type Notes

PON OLT C220v1.1/C220v1.2/C300 Series/C300v2 Series/C300v3

Series

PON ONU F820/LAN-MDU Series/xDSL-MDU Series/FTTH ONU

l Command Format

CFG-ONU::OLTID=olt-name,PONID=ponport_location,ONUIDTYPE=onuid-type,

ONUID=onu-index:CTAG::AUTHTYPE=auth-type[,AUTHINFO=onu-index][,PWD=password]
[,RID=rid];

l Operated Target Identifier

7-4

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

Parameter Type Value Range Description Optional Description

Name

OLTID String SIZE(128) OLT IP address, name, Required

or ID

PONID String SIZE(128) To locate a PON port by Required

Rack–Shelf–Slot- Rack-Shelf-Slot-PON
–PON Port Port ID. Type NA
when this parameter is
absent.

ONUID- String SIZE(128) ONU identifier type: Required

TYPE ONU_NAME
MAC
LOID
ONU_NUMBER
SN
PASSWORD

ONUID String SIZE(128) ONU identifier. Required

The value could
be chosen from
ONU_NAME, MAC,
LOID, ONU_NUMBER,
SN and PASSWORD
to uniquely identify an
ONU on the PON port.

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

AUTHTYPE String MAC Authorization type Required

LOID
LOIDONCEON
PASSWORD
SN
PWDONCEON
RID
SNRID

AUTHINFO String SIZE(128) MAC, LOID, Optional, MAC

PASSWORD, RID address format:
or SN of the ONU XX-XX-XX-XX-XX-XX

PWD OCTET SIZE(1-12) Password for SN or Optional

STRING LOID。

7-5

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

RID String SIZE(36) RID Optional

If the authorization
mode for AUTHTYPE
is SNRID, then
AUTHINFO means
SN and RID means
RID.

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1：
CFG-ONU::OLTID=10.63.194.46,PONID=1-1-8-1,ONUIDTYPE=LOID,
ONUID=8981720182101:CTAG::AUTHTYPE=LOID,
AUTHINFO=089866666666,PWD=17445245;
Response ：
ZTE_PONOAM 2013-10-31 14:55:48
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark：
This command is used to change LOID and LOID Password.
Command 2：
CFG-ONU::OLTID=10.63.194.46,PONID=1-1-8-1,
ONUIDTYPE=ONU_NUMBER,ONUID=2:CTAG::AUTHTYPE=SNRID,
AUTHINFO=ZTEG10012454,RID=5452354;
Response ：
ZTE_PONOAM 2014-11-31 16:25:21
M CTAG COMPLD
EN=0 ENDESC=No Error
;

7-6

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

Remark：
This command is used to change SN and RID.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

GPON If Authorization type is PASSWORD, the length of password is 10. The

OLT will cut off the password if it is over 10.

l Revision History

Revision Date Notes

NetNu- 2014-12-23 New Command Parameters：

menU31R20V12.15.20T85 RID
New Command Parameter
Values：RID,SNRID for
AUTHTYPE

【Delete ONU】
7.1.3 DEL-ONU【 】
l Description
This command is used for deleting ONU.

l Applicable NE

NE Category NE Type Notes

PON OLT C220v1.1/C220v1.2/C300 Series/C300v2 Series/C300v3

Series

PON ONU F820/LAN-MDU Series/xDSL-MDU Series/FTTH ONU

l Command Format

DEL-ONU::OLTID=olt-name,PONID=ponport_location:CTAG::ONUIDTYPE=onuid-type,
ONUID=onu-index;

l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

7-7

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

OLTID String SIZE(128) OLT IP address or Required

name, ID

PONID String SIZE(128) PON Port location Required

Rack-Shelf- information, located by
Slot-PON Port Rack-Shelf-Slot-PON
Number Port, NA means
nothing

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

ONUID- String SIZE(128) ONU identifier : Required

TYPE ONU_NAME
MAC
LOID
ONU_NUMBER
SN
PASSWORD

ONUID String SIZE(128) ONU identifier. Required

The value could
be chosen from
ONU_NAME, MAC,
LOID, ONU_NUMBER,
SN and PASSWORD
to uniquely identify an
ONU on the PON port..

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
None.
l Average Command Response Time

Scenario Average Response Time (s)

7-8

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

l Notes

Point Details

GPON If Authorization type is PASSWORD, the length of password is 10. The

OLT will cut off the password if it is over 10.

l Revision History

Revision Date Notes

【Create Service Port】

7.1.4 CRT-SERVICEPORT【 】
l Description
This command is used to create a service port.
l Applicable NE

NE Category NE Type Notes

PON OLT C300 Series/C300v2 Series/C300v3 Series

MSAN C300M Series/C300Mv4 Series

l Command Format
CRT-SERVICEPORT::(DID=device-id|DNAME=device-name)
(,PID=port-id|[,PID=port-id],OID=onu-id):CTAG::SERVICEPORTID=service-port-id
[,VIFTYPE=virtual-interface-type][,VIFID=virtual-interface-id],
MODE=mode[,DESC=desc][,ADMINSTAT=admin-status][,USERVID=user-vid]
[,USERSVID=user-svid][,USERCOS=user-cos]
[,USERETHERTYPE=user-ether-type][,USERDEFETHERTYPE=user-define-ether-type]
[,USERETHERTYPEFILTER=user-ether-type-filter]
[,ALLOWEDETHERTYPE=allowed-ether-type]
[,ALLOWEDUSERDEFETHERTYPE=allowed-user-define-ether-type]
[,STARTUSERVID=start-user-vid][,ENDUSERVID=end-user-vid][,USERDSCP=user-dscp]
[,NETWORKCVID=network-cvid][,NETWORKCTAGCOS=network-ctag-cos]
[,NETWORKSVID=network-svid][,NETWORKSTAGCOS=network-stag-cos]
[,TLSSVID=tls-svid][,TLSCVID=tls-cvid]
[,INGRESSTRAFFICPRF=ingress-traffic-prf]
[,EGRESSTRAFFICPRF=egress-traffic-prf]
[,QOSQUEUEID=qos-queue-id][,VLANMERGE=vlan-merge];

7-9

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required Under Certain

Conditions: Must choose
one between DID and
DNAME

DNAME String SIZE(1-32) NE Name Required Under Certain

Conditions: Must choose
one between DID and
DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Required Under Certain

port Conditions: Must choose
one between PID and
(PID,OID)

OID String rack-shelf-slot- ONU ID. It's used Required Under Certain
port-onu to identify the Conditions: Must choose
MacAddress ONU while DID or one between PID and OID
SN/LOID/Pass- DNAME indicates
word the OLT device.
(e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

SERVICE- Integer 1–128 Service Port ID Required

PORTID

VIFTYPE String VPort Virtual Interface Type Optional

If VIFTYPE is not
input, the default
value is VPort when
operated target
identifier is ONU.
VIFTYPE is invalid
when operated target
identifier is physical
port.

7-10

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

VIFID Integer 1-128 Virtual Interface ID Required Under Certain

Conditions: Must input
when OID is specified

MODE String Untag Service Port Mode Required

UntagAndEther- C300/C320v1.2/C300
Type M Series supports:
Priority Untag
Tag UntagAndEtherType
Tls Priority
TagAndEtherType Tag
TagAndCosPrior- TagAndCosPriority
ity VlanRangeTag
VlanRangeTag Tls
VlanRangeTa- C300v2.0/C300v3.0/
gAndEtherType C320v2.0/C320v3.0/
VlanRangeTa- C300Mv4/C350Mv4
gAndCos supports:
CVlanTranspar- Untag
ent UntagAndEtherType
DoubleVlanTag Priority
DoubleTlsVlan Tag
Tls
TagAndEtherType
TagAndCosPriority
VlanRangeTag
VlanRangeTagAndE-
therType
VlanRangeTagAnd-
Cos
CVlanTransparent
DoubleVlanTag
DoubleTlsVlan

DESC Octet SIZE(0-64) Service Port Optional

String Description
The size is 0-32
when NE type is
C300/C320v1.2/
C300M Series
The size is 0-64 when
NE type is C300v2.0/
C300v3.0/C320v2.0/
C320v3.0/C300Mv4/
C350Mv4

7-11

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

ADMIN- String Enable Administrative Status Optional

STAT Disable

USERVID Integer 1–4094 User VLAN ID Optional

Supported by C30
0/C320v1.2/C300M
Series when mode is:
Tag
TagAndEncap
TagAndEtherType
TagAndCosPriority
DoubleVlanTag
TagAndDscp
Supported by
C300v2.0/
C300v3.0/C320v2.0/
C320v3.0/C300Mv4/
C350Mv4 when mode
is:
Tag
TagAndEtherType
TagAndCosPriority
DoubleVlanTag

USERSVID Integer 1–4094 User SVLAN ID Optional

Supported by C30
0/C320v1.2/C300M
Series when mode is:
DoubleVlanTag
Supported by
C300v2.0/
C300v3.0/C320v2.0/
C320v3.0/C300Mv4/
C350Mv4 when mode
is:
DoubleVlanTag

USERCOS Integer 0–7 User CoS Priority Optional

Supported by C30
0/C320v1.2/C300M
Series when mode is:
Priority
TagAndCosPriority
VlanRangeTagAnd-
CosPriority
Supported by
C300v2.0/

7-12

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

C300v3.0/C320v2.0/
C320v3.0/C300Mv4/
C350Mv4 when mode
is:
Priority
TagAndCosPriority
VlanRangeTagAnd-
Cos

USERETH- String PPPoE User Ethernet Type Optional

ERTYPE IPoE Supported by C30
UserDefined 0/C320v1.2/C300M
Series when mode is:
UntagAndEtherType
TagAndEncap
TagAndEtherType
VlanRangeTagAn-
dEncap
VlanRangeTagAndE-
therType
Supported by
C300v2.0/C300v3.0/
C320v2.0/C320v3.0/
C300Mv4/C350Mv4
when mode is:
UntagAndEtherType
TagAndEtherType
VlanRangeTagAndE-
therType

USERDE- String Hex User Defined Ethernet Optional

FETHER- value:e.g.0x8180 Type
TYPE Required when
USERETHERTYPE is
UserDefined

USERET- String Enable User Ethernet Type Optional

HERTYPE- Disable Filter
FILTER Supported by C30
0/C320v1.2/C300M
Series

7-13

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

AL- String AllEtherType Allowed User Ethernet Deprecated

LOWEDE- PPPoE Type
THER- IPoE Supported by
TYPE UserDefined C300v2.0/C300v3.0/
C320v2.0/C320v3.0/
C300Mv4/C350Mv4
when mode is:
Untag
Priority
Tag
VlanRangeTag
VlanRangeTagAnd-
Cos
DoubleVlanTag

ALLOWE- String Hex Allowed User Defined Deprecated

DUSERDE- value:e.g.0x8180 Ethernet Type
FETHER- Required when
TYPE ALLOWEDETHER-
TYPE is
UserDefined

STAR- Integer 1–4094 User Starting VLAN ID Optional

TUSERVID Supported by C30
0/C320v1.2/C300M
Series when mode is:
VlanRangeTag
VlanRangeTagAn-
dEncap
VlanRangeTagAndE-
therType
VlanRangeTagAnd-
CosPriority
CVlanTransparent
Supported by
C300v2.0/C300v3.0/
C320v2.0/C320v3.0/
C300Mv4/C350Mv4
when mode is:
VlanRangeTag
VlanRangeTagAndE-
therType
VlanRangeTagAnd-
Cos
CVlanTransparent

7-14

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

EN- Integer 1–4094 User Ending VLAN ID Optional

DUSERVID Supported by C30
0/C320v1.2/C300M
Series when mode is:
VlanRangeTag
VlanRangeTagAn-
dEncap
VlanRangeTagAndE-
therType
VlanRangeTagAnd-
CosPriority
CVlanTransparent
Supported by
C300v2.0/C300v3.0/
C320v2.0/C320v3.0/
C300Mv4/C350Mv4
when mode is:
VlanRangeTag
VlanRangeTagAndE-
therType
VlanRangeTagAnd-
Cos
CVlanTransparent

USERD- Integer 0–63 User DSCP Priority Optional

SCP Supported by C30
0/C320v1.2/C300M
Series when mode is:
tagAndDscp

NETWOR- Integer 1–4094 Network CVLAN ID Optional

KCVID Supported by C30
0/C320v1.2/C300M
Series when mode is:
Untag
UntagAndEtherType
Priority
Tag
TagAndEncap
TagAndEtherType
TagAndCosPriority
DoubleVlanTag
TagAndDscp
Supported by
C300v2.0/
C300v3.0/C320v2.0/

7-15

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

C320v3.0/C300Mv4/
C350Mv4 when mode
is:
Untag
UntagAndEtherType
Priority
Tag
TagAndEtherType
TagAndCosPriority
DoubleVlanTag

NET- Integer 0–7 Network CVLAN CoS Optional

WORKC- Priority
TAGCOS Supported by
C300/C320v1.2/C300
M
Series when mode is:
Untag
UntagAndEtherType
Priority
Tag
TagAndEncap
TagAndEtherType
TagAndCosPriority
DoubleVlanTag
TagAndDscp
Supported by
C300v2.0/C300v3.0/
C320v2.0/C320v3.0/
C300Mv4/C350Mv4
when mode is:
Untag
UntagAndEtherType
Priority
Tag
TagAndEtherType
TagAndCosPriority
DoubleVlanTag

7-16

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

NETWOR- Integer 1–4094 Network SVLAN ID Optional

KSVID Supported by C30
0/C320v1.2/C300M
Series when mode:
Untag
UntagAndEtherType
Priority
Tag
TagAndEncap
TagAndEtherType
TagAndCosPriority
DoubleVlanTag
TagAndDscp
VlanRangeTag
VlanRangeTagAn-
dEncap
VlanRangeTagAndE-
therType
VlanRangeTagAnd-
CosPriority
Supported by
C300v2.0/C300v3.0/
C320v2.0/C320v3.0/
C300Mv4/C350Mv4
when mode is:
Untag
UntagAndEtherType
Priority
Tag
TagAndEtherType
TagAndCosPriority
VlanRangeTag
VlanRangeTagAndE-
therType
VlanRangeTagAnd-
Cos
DoubleVlanTag

7-17

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

NET- Integer 0–7 Network SVLAN CoS Optional

WORK- Priority
STAGCOS Supported by C30
0/C320v1.2/C300M
Series when mode is:
Untag
UntagAndEtherType
Priority
Tag
TagAndEncap
TagAndEtherType
TagAndCosPriority
DoubleVlanTag
TagAndDscp
VlanRangeTag
VlanRangeTagAn-
dEncap
VlanRangeTagAndE-
therType
VlanRangeTagAnd-
CosPriority
Supported by
C300v2.0/C300v3.0/
C320v2.0/C320v3.0/
C300Mv4/C350Mv4
when mode is:
Untag
UntagAndEtherType
Priority
Tag
Tls
TagAndEtherType
TagAndCosPriority
VlanRangeTag
VlanRangeTagAndE-
therType
VlanRangeTagAnd-
Cos
DoubleVlanTag

7-18

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

TLSSVID Integer 1–4094 TLS SVLAN ID Optional

Supported by C30
0/C320v1.2/C300M
Series when mode is:
Tls
DoubleTlsVlan
Supported by
C300v2.0/C300v3.0/
C320v2.0/C320v3.0/
C300Mv4/C350Mv4
when mode is:
Tls
DoubleTlsVlan

TLSCVID Integer 1–4094 TLS CVLAN ID Optional

Supported by C30
0/C320v1.2/C300M
Series when mode is:
DoubleTlsVlan
Supported by
C300v2.0/C300v3.0/
C320v2.0/C320v3.0/
C300Mv4/C350Mv4
when
mode is :
DoubleTlsVlan
Supported by C600
when mode is :
Tls

INGRES- String SIZE(1–32) Ingress Traffic Profile Optional

STRAF-
FICPRF

EGRES- String SIZE(1–32) Egress Traffic Profile Optional

STRAF-
FICPRF

QOSQUE- Integer 0–7 QoS Queue ID Optional

UEID

7-19

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

VLAN- String Enable VLAN Merge Enabling Deprecated

MERGE Disable Supported by
C300v2.0/C300v3.0/
C320v2.0/C320v3.0/
C300Mv4/C350Mv4
when
mode is :
Tag
TagAndEtherType
TagAndCosPriority

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDNS, DDOF
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
No.1 Command :
CRT-SERVICEPORT::DID=10.63.204.165,OID=1-1-6-1-1:5::
SERVICEPORTID=1,VIFTYPE=VPort,VIFID=1,MODE=Untag,
DESC=UntagDesc,NETWORKCVID=100,NETWORKSVID=120;
Response:
0 2004-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create service port on 10.63.204.165,
and SERVICEPORTID is 1, VPort is 1, MODE is Untag,
NETWORKCVID is 100, NETWORKSVID is 120.
No.2 Command :
CRT-SERVICEPORT::DID=10.63.204.165,OID=1-1-6-1-1:5::
SERVICEPORTID=2,VIFTYPE=VPort,VIFID=1,MODE=TagAndEtherType,
DESC=TagAndEtherTypeDesc,USERVID=100,USERETHERTYPE=UserDefined,

7-20

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

USERDEFETHERTYPE=0x8180,USERETHERTYPEFILTER=Enable,NETWORKCVID=200;
Response:
0 2004-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create service port on 10.63.204.165,
and SERVICEPORTID is 2, VPort is 1, MODE is TagAndEtherType,
USERVID is 100, USERDEFETHERTYPE is 0x8180,
USERETHERTYPEFILTER is enabled, NETWORKCVID is 200.
No.3 Command :
CRT-SERVICEPORT::DID=10.63.204.165,OID=1-1-6-1-1:5::
SERVICEPORTID=3,VIFTYPE=VPort,VIFID=1,
MODE=VlanRangeTag,DESC=VlanRangeTagDesc,
STARTUSERVID=100,ENDUSERVID=120,NETWORKSVID=200;
Response:
0 2004-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create service port on 10.63.204.165,
and SERVICEPORTID is 3, VPort is 1, MODE is VlanRangeTag,
STARTUSERVID is 100, ENDUSERVID is 120, NETWORKSVID is 200.
No.4 Command :
CRT-SERVICEPORT::DID=10.63.204.165,OID=1-1-6-1-1:5::
SERVICEPORTID=4,VIFTYPE=VPort,VIFID=2,MODE=Tag,USERVID=20,
NETWORKCVID=30,EGRESSTRAFFICPRF=0G_2G,QOSQUEUEID=1;
Response:
0 2004-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
;

7-21

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

Remark:
This command is used to create service port on 10.63.204.165,
and SERVICEPORTID is 3, VPort is 1, MODE is Tag, USERVID is 20,
NETWORKCVID is 30, EGRESSTRAFFICPRF is 0G_2G, and QOSQUEUEID is 1.
No.5 Command :
CRT-SERVICEPORT::DID=10.63.196.151,OID=1-1-2-1-1:5::
SERVICEPORTID=2,VIFTYPE=VPort,VIFID=1,MODE=VlanRangeTag,
STARTUSERVID=100,ENDUSERVID=120,NETWORKSVID=200;
Response:
0 2004-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create service port on 10.63.196.151,
and SERVICEPORTID is 2, VPort is 1, MODE is VlanRangeTag,
STARTUSERVID is 100, ENDUSERVID is 120, and NETWORKSVID is 200.
No.6 Command :
CRT-SERVICEPORT::DID=10.63.196.151,PID=1-1-2-1:5::
SERVICEPORTID=2,MODE=VlanRangeTag,
STARTUSERVID=100,ENDUSERVID=120,NETWORKSVID=200;
Response:
0 2016-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create service port on 10.63.196.151,
and SERVICEPORTID is 2, MODE is VlanRangeTag,
STARTUSERVID is 100, ENDUSERVID is 120, and NETWORKSVID is 200.
l Average Command Response Time

Scenario Average Response Time (s)

7-22

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.14.20T80 2014-9-12 New TL1 Command

NetNumenU31R20V12.14.20T80 2014-11-18 New Command Parameters:

VLANMERGE

NetNumenU31R20V12.16.20T100 2015-12-25 New Command Parameters for

Mode Tls: NETWORKCTAGCOS,
NETWORKSTAGCOS

NetNumenU31R20V12.16.20T105 2016-3-29 New Command Parameter

Values: VlanRangeTag,
VlanRangeTagAndEtherType,
VlanRangeTagAndCos for MODE

NetNumenU31R20V12.16.20T105 2016-5-27 New Command Parameters: PID

Change OID, VIFID from Required to
Optional

NetNumenU31R20V12.16.20T105 2016-6-30 New Command Parameter Values:

UntagAndEtherType, Priority for
MODE

NetNumenU31R20V12.17.20T115 2017-1-10 Deprecate Command Parameters:

ALLOWEDETHERTYPE,
ALLOWEDUSERDEFETHERTYPE,
VLANMERGE

【Change Service Port】

7.1.5 CHG-SERVICEPORT【 】
l Description
This command is used to change service port configuration.
l Applicable NE

NE Category NE Type Notes

PON OLT C300 Series/C300v2 Series/C300v3 Series

MSAN C300Mv4 Series

l Command Format

7-23

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

CHG-SERVICEPORT::(DID=device-id|DNAME=device-name)
(,PID=port-id|[,PID=port-id],OID=onu-id):CTAG::SERVICEPORTID=service-port-id
[,INGRESSTRAFFICPRF=ingress-traffic-prf][,EGRESSTRAFFICPRF=egress-traffic-prf]
[,NETWORKCTAGCOS=network-ctag-cos][,NETWORKSTAGCOS=network-stag-cos]
[,DESC=desc];
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required Under

Certain Conditions:
Must choose one
between DID and
DNAME

DNAME String SIZE(1-32) NE Name Required Under

Certain Conditions:
Must choose one
between DID and
DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Required Under

port Certain Conditions:
Must choose one
between PID and
(PID,OID)

OID String rack-shelf-slot- ONU ID. It's used Required Under

port-onu to identify the ONU Certain Conditions:
MacAddress while DID or DNAME Must choose one
SN/LOID/Pass- indicates the OLT between PID and OID
word device. (e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

SERVICE- Integer 1-128 Service Port ID Required

PORTID

INGRES- String SIZE(1–32) Ingress Traffic Profile Optional

STRAF- "--" means delete traffic
FICPRF profile.

7-24

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

EGRES- String SIZE(1–32) Egress Traffic Profile Optional

STRAF- "--" means delete traffic
FICPRF profile.

NET- Integer 0–7 Network CVLAN CoS Optional

WORKC- Priority
TAGCOS Supported when mode
is:
Untag
Tag
TagAndEtherType
TagAndCosPriority
DoubleVlanTag
For more details
regarding mode,
please refer to
parameter MODE
of command
CRT-SERVICEPORT

NET- Integer 0–7 Network SVLAN CoS Optional

WORK- Priority
STAGCOS Supported when mode
is:
Tls
For more details
regarding mode,
please refer to
parameter MODE
of command
CRT-SERVICEPORT

DESC Octet SIZE(1–64) Description Optional

String "--" means to clear the
description.

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.

l Response Parameters
None.

l Error Code
IDNE, IRNE, IMP, IIPE, DDNS, DDOF, EEH

Refer to Chapter 5 Unified Error Code Definition for more details.

l Example

7-25

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

Command 1:
CHG-SERVICEPORT::DID=10.63.204.165,OID=1-1-6-1-1:5::SERVICEPORTID=3,
INGRESSTRAFFICPRF=INTEST,EGRESSTRAFFICPRF=EGTEST;
Response:
0 2014-10-28 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to change the configuration of Rack1/Shelf1/Slot6/Port1/ONU1
/ServicePort3 on NE 10.63.204.165.
Command 2:

CHG-SERVICEPORT::DID=10.63.204.165,OID=1-1-6-1-1:5::SERVICEPORTID=3,
NETWORKSTAGCOS=5;

Response:
0 2015-12-25 00:00:00
M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:

This command is used to change the configuration of Rack1/Shelf1/Slot6/Port1/ONU1

/ServicePort3 on NE 10.63.204.165.
Command 3:

CHG-SERVICEPORT::DID=10.63.204.165,PID=1-1-6-1:5::SERVICEPORTID=3,
NETWORKSTAGCOS=5;
Response:

0 2016-05-27 00:00:00
M 5 COMPLD

EN=0 ENDESC=No Error

;
Remark:

This command is used to change the configuration of

Rack1/Shelf1/Slot6/Port1/ServicePort3 on NE 10.63.204.165.
Command 4:

7-26

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

CHG-SERVICEPORT::DID=10.63.204.165,PID=1-1-6-1:5::SERVICEPORTID=3,
DESC=Test;
Response:
0 2016-09-19 15:33:07
M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to change the description of
Rack1/Shelf1/Slot6/Port1/ServicePort3 on NE 10.63.204.165.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.14.20T80 2014-10-28 New TL1 Command

NetNumenU31R20V12.16.20T100 2015-12-25 New Command Parameters：

NETWORKCTAGCOS, NETWORK-
STAGCOS

NetNumenU31R20V12.16.20T105 2016-5-27 Change OID from Required to Optional

NetNumenU31R20V12.16.20T110 2016-9-19 New Command Parameters：DESC

【Delete Service Port】

7.1.6 DLT-SERVICEPORT【 】
l Description
This command is used to delete a service port.
l Applicable NE

NE Category NE Type Notes

PON OLT C300 Series/C300v2 Series/C300v3 Series

MSAN C300M Series/C300Mv4 Series

7-27

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

l Command Format
DLT-SERVICEPORT::(DID=device-id|DNAME=device-name)
(,PID=port-id|[,PID=port-id],OID=onu-id):CTAG::
SERVICEPORTID=service-port-id;
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required Under

Certain Conditions:
Must choose one
between DID and
DNAME

DNAME String SIZE(1-32) NE Name Required Under

Certain Conditions:
Must choose one
between DID and
DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Required Under

port Certain Conditions:
Must choose one
between PID and
(PID,OID)

OID String rack-shelf-slot- ONU ID. It's used Required Under

port-onu to identify the ONU Certain Conditions:
MacAddress while DID or DNAME Must choose one
SN/LOID/Pass- indicates the OLT between PID and OID
word device. (e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

SERVICE- Integer 1-128 Service Port ID Required

PORTID

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.

7-28

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

l Error Code
DDNS, DDOF
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
DLT-SERVICEPORT::DID=10.63.204.165,OID=1-1-6-1-1:5::SERVICEPORTID=1;

Response:
0 2004-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error

;
Remark:
This command is used to delete service port 1 on 10.63.204.165.
Command 2:
DLT-SERVICEPORT::DID=10.63.204.165,PID=1-1-6-1:5::SERVICEPORTID=1;
Response:
0 2016-05-27 10:55:49

M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to delete service port 1 on 10.63.204.165.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.14.20T80 2014-9-16 New TL1 Command

7-29

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

NetNumenU31R20V12.16.20T105 2016-5-27 New Command

Parameters: PID
Change OID from Required
to Optional

【Bind Port to MVLAN】

7.1.7 BND-PORT-MVLAN【 】
l Description
This command is used to bind port to MVLAN.
l Applicable NE

NE Category NE Type Notes

DSL DSL Series

PON ONU F820/LAN-MDU Series

PON OLT C220v1.2/C300 Series/C300v2 Series/C300v3 Series

MSAN MSAG5200/MSAG5200V3/MSG5208/C300M Series/C300Mv4

Series

l Command Format
BND-PORT-MVLAN::(DID=device-id|DNAME=device-name),(PID=port-id)|(OID=onuid[,
ONUPORT=onu-port]):CTAG::MVLANID=mvlan-id[,
(VINTERFACE=vinterfaceid|VPI=vpi,VCI=vci)][,BINDTYPE=1/2][,
PROTOCOLTYPE=IGMP/MLD];
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required Under Certain

Conditions: Must choose
one between DID and
DNAME

DNAME String SIZE(1-32) NE Name Required Under Certain

Conditions: Must choose
one between DID and
DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Required Under Certain

port Conditions: Must choose
one between PID and
OID

7-30

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

OID String rack-shelf- ONU ID. It's used Required Under Certain
slot-port-onu to identify the ONU Conditions: Must choose
MacAddress while DID or DNAME one between PID and
SN/LOID/Pass- indicates the OLT OID
word device. (e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

ONUPORT String [rack-][shelf-][slot- UNI Port of ONU (e.g. Optional

]port 3-2: slot3-port2 If no
slot, 2: port2 1-1-3-2:
rack1-shelf1-slot3-
port2)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

MVLANID Inte- 1-4094 MVLAN ID Required

ger

VINTER- Inte- 0-128 Virtual Interface ID Optional

FACE ger (When virtual interface
type is BrgPort:
C300M Series/ C300Mv-
4/C350Mv4:0-10
DSL Series:1-8
MSAG5200:0-7
When virtual interface
type is VPort:1-128
)

VPI Inte- 0-255 VPI Optional: Must choose

ger VPI and VCI at the same
time

VCI Inte- 0-65535 VCI Optional: Must choose

ger VPI and VCI at the same
time

BINDTYPE Inte- 1:Source Bind Type Optional

ger 2:Receive

PROTO- String IGMP PROTOCOLTYPE Optional

COLTYPE MLD If not input,the default
value is IGMP.
Supported by
C300v2.0/C300v3.0.

7-31

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
IDNE、IRNE、IMP、IIPE、DDNS、DDOF、EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
No.1 Command :
BND-PORT-MVLAN::DID=10.61.94.77,PID=1-1-7-1:5::MVLANID=200,BINDTYPE=1;
Response:
0 2014-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to bind Rack1/Shelf1/Slot7/Port1 as a source port to MVLAN
200 on NE 10.61.94.77.
No.2 Command :
BND-PORT-MVLAN::DID=10.61.94.77,PID=1-1-3-11:5::MVLANID=200,BINDTYPE=2;
Response:
0 2014-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to bind Rack1/Shelf1/Slot3/Port11 as a receiving port to
MVLAN 200 on NE 10.61.94.77.
No.3 Command :
BND-PORT-MVLAN::DID=10.61.94.77,OID=1-1-2-1-1:5::MVLANID=200,
VINTERFACE=3,BINDTYPE=2,PROTOCOLTYPE=MLD;
Response:
0 2014-04-01 10:55:49
M 5 COMPLD

7-32

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

EN=0 ENDESC=No Error

;
Remark:
This command is used to bind Rack1/Shelf1/Slot2/Port1/ONU1/VPort3 as a receiving
port to MVLAN 200 on NE 10.61.94.77.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNu- 2014-10-28 Change Operated Target

menU31R20V12.14.20T80 Identifier:ONUPORT from
Required to Optional

NetNu- 2015-11-3 New Command Parameters：

menU31R20V12.15.20T95 PROTOCOLTYPE

【Unbind Port from MVLAN】

7.1.8 UBND-PORT-MVLAN【 】
l Description
This command is used to unbind port from MVLAN.
l Applicable NE

NE Category NE Type Notes

DSL DSL Series

PON ONU F820/LAN-MDU Series

PON OLT C220v1.2/C300 Series/C300v2 Series/C300v3 Series

MSAN MSAG5200/MSAG5200V3/MSG5208/C300M Series/C300Mv4

Series

l Command Format
UBND-PORT-MVLAN::(DID=device-id|DNAME=device-name),(PID=port-id)|(OID=onu-id[,
ONUPORT=onu-port]):CTAG::MVLANID=mvlan-id[,

7-33

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

(VINTERFACE=vinterface-id|VPI=vpi,VCI=vci)][,BINDTYPE=1/2][,
PROTOCOLTYPE=IGMP/MLD];
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required Under Certain

Conditions: Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required Under Certain

Conditions: Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Required Under Certain

port Conditions: Must
choose one between
PID and OID

OID String rack-shelf- ONU ID. It's used Required Under Certain
slot-port-onu to identify the ONU Conditions: Must
MacAddress while DID or DNAME choose one between
SN/LOID/Pass- indicates the OLT PID and OID
word device. (e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

ONUPORT String [rack-][shelf-][slo- UNI Port of ONU (e.g. Optional

t-]port 3-2: slot3-port2 If no
slot, 2: port2 1-1-3-2:
rack1-shelf1-slot3-
port2)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

MVLANID Integer 1-4094 MVLAN ID Required

7-34

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

VINTER- Integer 0-128 Virtual Interface ID Optional

FACE (When virtual interface
type is BrgPort:
C300M Series/ C300M-
v4/C350Mv4:0-10
DSL Series:1-8
MSAG5200:0-7
When virtual interface
type is VPort:1-128
)

VPI Integer 0-255 VPI Optional: Must choose

VPI and VCI at the same
time

VCI Integer 0-65535 VCI Optional: Must choose

VPI and VCI at the same
time

BINDTYPE Integer 1:Source Bind Type Optional

2:Receive

PROTO- String IGMP PROTOCOLTYPE Optional

COLTYPE MLD If not input,the default
value is IGMP.
Supported by
C300v2.0/C300v3.0.

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters

None.
l Error Code
IDNE、IRNE、IMP、IIPE、DDNS、DDOF、EEH

Refer to Chapter 5 Unified Error Code Definition for more details.

l Example
No.1 Command :

UBND-PORT-MVLAN::DID=10.61.94.77,PID=1-1-7-1:5::MVLANID=200,BINDTYPE=1;
Response:

0 2014-04-01 10:55:49

M 5 COMPLD
EN=0 ENDESC=No Error

7-35

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

;
Remark:
This command is used to unbind Rack1/Shelf1/Slot7/Port1 from MVLAN 200 on NE
10.61.94.77.
No.2 Command :
UBND-PORT-MVLAN::DID=10.61.94.77,PID=1-1-3-11:5::MVLANID=200,VINTERFACE=1,
BINDTYPE=2;
Response:
0 2014-04-01 10:55:49

M 5 COMPLD
EN=0 ENDESC=No Error
;

Remark:
This command is used to unbind Rack1/Shelf1/Slot3/Port11 from MVLAN 200 on NE
10.61.94.77.
No.3 Command :
UBND-PORT-MVLAN::DID=10.61.94.77,OID=1-1-2-1-1:5::
MVLANID=200,VINTERFACE=3,BINDTYPE=2,PROTOCOLTYPE=MLD;
Response:
0 2014-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
;

Remark:
This command is used to unbind Rack1/Shelf1/Slot2/Port1/ONU1/VPort3 from
MVLAN 200 on NE 10.61.94.77.

l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

7-36

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

Revision Date Notes

NetNu- 2014-10-28 Change Operated Target

menU31R20V12.14.20T80 Identifier:ONUPORT from
Required to Optional

NetNu- 2015-11-3 New Command Parame-

menU31R20V12.15.20T95 ters：PROTOCOLTYPE

【Modify Port QoS Traffic

7.1.9 CHG-PORTQOS-TRAFFICPRF【
】
Profile】
l Description
This command is used to change port QoS traffic profile.

l Applicable NE

NE Category NE Type Notes

DSL DSL Series

MSAN MSAG5200/MSAG5200V3/MSAG5208/C300M
Series/C300Mv4 Series

PON OLT C300 Series/C300v2 Series/C300v3 Series

l Command Format
CHG-PORTQOS-TRAFFICPRF::(DID=device-id|DNAME=device-name),
(PID=port-id|([PID=port-id,]OID=onu-id[,ONUPORT=onu-port])):CTAG::
VINTERFACETYPE=virtual-interface-type,(SVLANID=svlan-id[,CVLANID=cvlan-
id]|VINTERFACEID=vinterface-id,| (VPI=vpi,VCI=vci))[,DIRECTION=direction],

TRAFFICPRF=traffic-profile-name;
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required Under Certain

Conditions: Must choose
one between DID and
DNAME

DNAME String SIZE(1-32) NE Name Required Under Certain

Conditions: Must choose
one between DID and
DNAME

7-37

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

PID String rack-shelf- Port ID (e.g 1-1-3-5) Case 1: PID. PID Required
slot-port Case 2: [PID,]OID. PID
Optional, OID Required

OID String rack-shelf- ONU ID. It's used to Case 1: PID. PID Required
slot-port-onu identify the ONU while Case 2: [PID,]OID. PID
MacAddress DID or DNAME indicates Optional, OID Required
SN/LOID/Pa- the OLT device.
ssword (e.g.1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

ONUPORT String [rack-][shelf-] UNI Port of ONU Required Under Certain

[slot-]port (e.g. 3-2: slot3-port2 Conditions: Must choose
If no slot, 2: port2 one between PID and
1-1-3-2: rack1-shelf1- (OID,ONUPORT)
slot3-port2)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

VINTER- String VLAN Virtual Interface Type. Required

FACE- BrgPort (VPort is supported
TYPE VPort by PON OLT/C300
Mv4/C350Mv4.)

SVLANID Integer 1-4094 S-VID Optional

CVLANID Integer 1-4094 C-VID Optional

VINTER- Integer 1-128 Virtual Interface ID Optional

FACEID

VPI Integer 0-255 VPI Optional

Not supported by MSAN.

VCI Integer 0-65535 VCI Optional

Not supported by MSAN.

DIREC- String Ingress Direction Optional

TION Egress (Default value is Egress.)

TRAF- String SIZE(0-32) Traffic Profile Name Required

FICPRF

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.

7-38

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

l Error Code
IIAC, IMP, IIPE, DDOF
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
No.1 Command :
CHG-PORTQOS-TRAFFICPRF::DID=10.63.173.29,PID=1-1-3-1:5::
VINTERFACETYPE=VLAN,SVLANID=5,TRAFFICPRF=TEST.PRF;
Response:
0 2004-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to change port QoS traffic profile of Rack1/
Shelf1/Slot3/Port1/SVLANID5 on 10.63.174.29.
No.2 Command :
CHG-PORTQOS-TRAFFICPRF::DID=10.63.173.29,PID=1-1-3-1:5::
VINTERFACETYPE=BrgPort,VINTERFACEID=1,TRAFFICPRF=TEST.PRF;
Response:
0 2004-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to change port QoS traffic profile of Rack1/
Shelf1/Slot3/Port1/BrgPort1 on 10.63.174.29.
No.3 Command :
CHG-PORTQOS-TRAFFICPRF::DID=10.63.173.29,PID=1-1-3-1:5::
VINTERFACETYPE=BrgPort,VPI=8,VCI=81,DIRECTION=Egress,TRAFFICPRF=TEST.PRF;
Response:
0 2004-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:

7-39

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

This command is used to change port QoS traffic profile of Rack1/

Shelf1/Slot3/Port1/BrgPort(8/81) on 10.63.174.29.
No.4 Command :
CHG-PORTQOS-TRAFFICPRF::DID=10.63.173.29,OID=1-1-3-1-1:5::
VINTERFACETYPE=VPort,VINTERFACEID=1,TRAFFICPRF=TEST.PRF;
Response:
0 2004-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to change port QoS traffic profile of Rack1/
Shelf1/Slot3/Port1/ONU1/VPort1 on 10.63.174.29.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.14.20T80 2014-9-23 New Command Parameter

Values:VPort for VINTERFACETYPE

NetNu- 2016-4-27 Change ONUPORT from Required to

menU31R20V12.16.20T105 Optional
Change Command Parameters：
(OID=onu-id[,ONUPORT=onu-port])
to ([PID=port-id,]OID=onu-
id[,ONUPORT=onu-port])

【Delete Port QoS Traffic

7.1.10 DLT-PORTQOS-TRAFFICPRF【
】
Profile】
l Description
This command is used to delete port QoS traffic profile.

7-40

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

l Applicable NE

NE Category NE Type Notes

PON ONU xDSL-MDU Series

MSAN MSAG5200V3/C300M Series/C300Mv4 Series

PON OLT C300v2 Series/C300v3 Series

l Command Format
DLT-PORTQOS-TRAFFICPRF::(DID=device-id|DNAME=device-name),(PID=port-id|
(OID=onu-id,ONUPORT=onu-port)):CTAG::VINTERFACETYPE=virtual-interface-type,
(SVLANID=svlan-id[,CVLANID=cvlan-id]|VINTERFACEID=vinterface-id,|
(VPI=vpi,VCI=vci))[,DIRECTION=direction];
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required Under Certain

Conditions: Must choose
one between DID and
DNAME

DNAME String SIZE(1-32) NE Name Required Under Certain

Conditions: Must choose
one between DID and
DNAME

PID String rack-shelf- Port ID (e.g 1-1-3-5) Required Under Certain

slot-port Conditions: Must choose
one between PID and OID

OID String rack-shelf- ONU ID. It's used to Required Under Certain
slot-port-onu identify the ONU while DID Conditions: Must choose
MacAddress or DNAME indicates the one between PID and OID
SN/LOID/Pa- OLT device.
ssword (e.g.1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

ONUPORT String [rack-][shelf-] UNI Port of ONU Required Under Certain

[slot-]port (e.g. 3-2: slot3-port2 Conditions: Must choose
If no slot, 2: port2 one between PID and
1-1-3-2: rack1-shelf1- (OID,ONUPORT)
slot3-port2)

l Command Parameter

7-41

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

Parameter Type Value Range Description Optional Description

Name

VINTER- String VLAN Virtual Interface Type. Required

FACE- BrgPort (VPort is supported
TYPE VPort by PON OLT/C300
Mv4/C350Mv4.)
SVLANID Integer 1-4094 S-VID Optional

CVLANID Integer 1-4094 C-VID Optional

VINTER- Integer 1-128 Virtual Interface ID Optional

FACEID

VPI Integer 0-255 VPI Optional

Not supported by MSAN.

VCI Integer 0-65535 VCI Optional

Not supported by MSAN.

DIREC- String Ingress Direction Optional

TION Egress (If DIRECTION is not
input, the ingress and
egress traffic profiles will
be deleted.)

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code

IIAC, IMP, IIPE, DDOF

Refer to Chapter 5 Unified Error Code Definition for more details.
l Example

No.1 Command :
DLT-PORTQOS-TRAFFICPRF::DID=10.63.173.29,PID=1-1-3-1:5::
VINTERFACETYPE=VLAN,SVLANID=5;

Response:
0 2004-04-01 10:55:49

M 5 COMPLD
EN=0 ENDESC=No Error

;
Remark:

7-42

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

This command is used to delete port QoS traffic profile of

Rack1/Shelf1/Slot3/Port1/SVLANID5 on 10.63.173.29.
No.2 Command :
DLT-PORTQOS-TRAFFICPRF::DID=10.63.173.29,PID=1-1-3-1:5::
VINTERFACETYPE=BrgPort,VINTERFACEID=1;
Response:
0 2004-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to delete port QoS traffic profile of
Rack1/Shelf1/Slot3/Port1/BrgPort1 on 10.63.173.29.
No.3 Command :
DLT-PORTQOS-TRAFFICPRF::DID=10.63.173.29,PID=1-1-3-1:5::
VINTERFACETYPE=BrgPort,VPI=8,VCI=81,DIRECTION=Egress;
Response:
0 2004-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to delete port QoS traffic profile of
Rack1/Shelf1/Slot3/Port1/BrgPort(8/81) on 10.63.173.29.
No.4 Command :
DLT-PORTQOS-TRAFFICPRF::DID=10.63.173.29,OID=1-1-3-1-1:5::
VINTERFACETYPE=VPort,VINTERFACEID=1;
Response:
0 2004-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to delete port QoS traffic profile of
Rack1/Shelf1/Slot3/Port1/ONU1/VPort1 on 10.63.173.29.

7-43

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.14.20T80 2014-9-23 New Command Parameter Val-

ues:VPort for VINTERFACETYPE

7.1.11 CHG-PORT-MAXLEARNTMAC【 【Change Port Maximum

】
Number of Learnt MAC Addresses】
l Description
This command is used to change maximum number of learnt MAC addresses.
l Applicable NE

NE Category NE Type Notes

PON OLT C300 Series/C300v2 Series/C300v3 Series

MSAN C300M Series

DSL DSL Series

l Command Format
CHG-PORT-MAXLEARNTMAC::(DID=device-id|DNAME=device-name),(PID=port-
id|([PID=port-id,]OID=onu-id[,ONUPORT=onu-port])):CTAG::[VIFTYPE=virtual-interface-type,][(VIFID
l Operated Target Identifier

Parameter Type Value Range Description Optional

Name Description

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one
between DID and
DNAME

7-44

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one
between DID and
DNAME

PID String rack-shelf-slot-port Port ID (e.g. 1-1-3-5) Case 1: PID. PID

Required
Case 2: [PID,]OID.
PID Optional, OID
Required

OID String rack-shelf-slot-port- ONU ID. It's used Case 1: PID. PID
onu to identify the ONU Required
MacAddress while DID or DNAME Case 2: [PID,]OID.
SN/LOID/Password indicates the OLT PID Optional, OID
device. Required
(e.g.1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

ONUPORT String [rack-][shelf-][slot-]p- UNI Port of ONU Required Under

ort (e.g. 3-2: slot3-port2 Certain Conditions:
If no slot, 2: port2 Must choose one
1-1-3-2: rack1- between PID and
shelf1-slot3-port2) (OID,ONUPORT)

l Command Parameter

Parameter Type Value Range Description Optional

Name Description

VIFTYPE String VPort Virtual Interface Type. (If Optional

ServicePort VIFTYPE is not input, the
BrgPort default value is VPort when
operated target identifier is
ONU, and the default value
is BrgPort when operated
target identifier is physical
port.)

7-45

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

VIFID Integer 1-256 Virtual Interface ID. Optional

(When operated target
identifier is ONU, VIFID
means VPort number.
When operated target
identifier is physical port,
VIFID means bridge port
number.)

VLANID Integer 1-4094 VLAN ID Optional

MACLIMITSTAT String Enable MAC Limit Status Optional

Disable

MAXLEARNT- Integer 0-32768 Maximum Number of Optional

MAC Learnt MAC Addresses

SERVICENAME String SIZE(1-64) Service Name. Optional

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code

IDNE、DDOF
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
No.1 Command :
CHG-PORT-MAXLEARNTMAC::DID=10.61.94.33,OID=1-1-1-1-1:5::VIFID=1,
MACLIMITSTAT=Enable,MAXLEARNTMAC=10;
Response:

0 2004-04-01 10:55:49
M 5 COMPLD

EN=0 ENDESC=No error

;

Remark:

This command is used to set maximum number of learnt MAC addresses of

Rack1/Shelf1/Slot1/Port1/ONU1/VPort1 to 10 on 10.61.94.33.

No.2 Command :

7-46

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

CHG-PORT-MAXLEARNTMAC::DID=10.61.94.33,OID=1-1-1-1-1:5::VIFTYPE=VPort,VIFID=1,
MACLIMITSTAT=Disable;
Response:
0 2004-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No error
;
Remark:
This command is used to disable MAC address limit of
Rack1/Shelf1/Slot1/Port1/ONU1/VPort1 on 10.61.94.33.
No.3 Command :
CHG-PORT-MAXLEARNTMAC::DID=10.61.94.33,PID=1-1-1-1:5::VLANID=20,
MACLIMITSTAT=Enable,MAXLEARNTMAC=10;
Response:
0 2004-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No error
;
Remark:
This command is used to set maximum number of learnt MAC addresses of
Rack1/Shelf1/Slot1/Port1/VLAN20 to 10 on 10.61.94.33.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.13.20T50 2013-8-14 Delete Command Parameters: VIFTYPE

New Command Parameters: VLANID
Change Command Parameters:
LEARNTMACSTATUS to MACLIMITSTAT
Change VIFID from Required to Optional

7-47

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

NetNumenU31R20V12.16.20T105 2016-4-27 New Command Parameters：VIFTYPE

New Command Parameters ：
SERVICENAME

【Change Port Identification】

7.1.12 CHG-PORTLOCATING【 】
l Description
Change the port identification.
l Applicable NE

NE Category NE Type Notes

PON OLT C220v1.1/C220v1.2/C300 Series/C300v2 Series/C300v3

Series

MSAN MSAG5200V3/C300M Series/C300Mv4 Series

DSL DSL Series

l Command Format
CHG-PORTLOCATING::(DID=device-id|DNAME=device-name),(PID=port-id|OID=oid):
CTAG::[VIFTYPE=virtual-interface-type,][(VIFID=vinterface-id|SERVICENAME=service-name)]
[,FORMAT=format-value][,REMOTEIDSTAT=remoteid-status][,REMOTEIDNAME=
remoteid-name][,REMOTEIDPRF=remoteid-profile][,DHCPSYNTAXPRF=dhcp-syntax-profile,
PPPOESYNTAXPRF=pppoe-syntax-profile];
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required Under Certain

Conditions:Must choose
one between DID and
DNAME

DNAME String SIZE(1-32) NE Name Required Under Certain

Conditions:Must choose
one between DID and
DNAME

PID String rack-shelf- Port ID (e.g 1-1-3-5) Required Under Certain

slot-port Conditions:Must choose
one between PID and
OID

7-48

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

OID String rack-shelf- ONU ID. It's used to Required Under Certain
slot-port-onu identify the ONU while Conditions:Must choose
MacAddress DID or DNAME indicates one between PID and
SN/LOID/Pas- the OLT device. OID
sword (e.g.1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter

Parame- Type Value Range Description Optional

ter Name Description

VIFTYPE String VPort Virtual Interface Type. Optional

ServicePort (If VIFTYPE is not input, the
BrgPort default value is VPort when
operated target identifier is ONU,
and the default value is BrgPort
when operated target identifier is
physical port.)

VIFID Integer 1-256 Virtual Interface ID. Optional

Not supported by DSL Series.

SERVICE- String SIZE(1-64) Service Name. Optional

NAME

FORMAT String CTC The format of port Optional

DSL-FORUM identification:
DSL-FORUM- CTC: China Telecom
RACKFRAME DSL-FORUM: DSL Forum
CNC DSL-FORUM-RACKFRAME:
TT DSL Forum with Rack and Frame
KT (Supported by DSL Series)
TI CNC: China Netcom
ST TT: T.Telekom
CISCO KT: Korea Telecom (Supported
JUNIPER by C300 Series/MSAG5200V3)
CTCDSLAM TI: Telecom Italia
KPN ST: Singapore Telecommunica-
FLEXIBLE- tions Limited (Singtel) (Supported
SYNTAX by C300 Series/MSAG5200V3)
FT CISCO: CISCO (Supported by
DT DSL Series)
SILKNET JUNIPER: Juniper (Supported by
VODAFONE DSL Series)
BHARTIAIRTEL CTCDSLAM: China Telecom
CUC DSLAM (Supported by DSL
Series)
7-49

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

[Syntax Profile] KPN: KPN (Supported by DSL

Series)
FLEXIBLE-SYNTAX: Flexible
Syntax
FT:France Telecom
DT:TR156
SILKNET:Georgia Telcom
VODAFONE:Vodafone
BHARTIAIRTEL:Bharti Airtel
CUC:China Unicom
[Syntax Profile](Syntax Profile
Name, Supported by C300M
Series)

RE- String Enable Remote ID Status Optional

MOTEID- Disable
STAT

RE- String SIZE(1-64) Name of Remote ID. Optional

MOTEID- --:delete remote ID name
NAME

RE- String SIZE(1-32) Remote ID Profile. Optional

MOTEID- --:delete remote ID profile
PRF Supported by C300v2 Series and
C300v3 Series

DHCP- String SIZE(1-32) DHCP Syntax Profile. Optional

SYNTAX- Supported by DSL Series.
PRF

PP- String SIZE(1-32) PPPoE Syntax Profile. Optional

POESYN- Supported by DSL Series.
TAXPRF

l Response Format

Refer to Section 4.2.2.2 for detailed TL1 command response format.

l Response Parameters

None.
l Error Code

DDOF, IIPE, EEH

Refer to Chapter 5 Unified Error Code Definition for more details.

l Example

No.1 Command :

7-50

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

CHG-PORTLOCATING::DID=10.63.196.242,OID=1-1-1-2-1:CTAG::VIFID=1,
FORMAT=DSL-FORUM,REMOTEIDSTAT=Enable,REMOTEIDNAME=test;
Response:
ZTE-EB9A30BF27A 2010-09-27 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to change the port identification of Rack1/Shelf1/Slot1/Port2
Onu1 on 10.63.196.242.
No.2 Command :
CHG-PORTLOCATING::DID=10.63.196.242,OID=1-1-1-3-1:CTAG::VIFID=1,
FORMAT=DSL-FORUM,REMOTEIDSTAT=Enable;
Response:
ZTE-EB9A30BF27A 2010-09-27 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to change the port identification of Rack1/Shelf1/Slot1/Port3
Onu1 on 10.63.196.242.
No.3 Command :
CHG-PORTLOCATING::DID=10.63.196.242,OID=1-1-1-4-1:CTAG::VIFID=1,
FORMAT=DSL-FORUM;
Response:
ZTE-EB9A30BF27A 2010-09-27 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to change the port identification of Rack1/Shelf1/Slot1/Port4
Onu1 on 10.63.196.242.
No.4 Command :
CHG-PORTLOCATING::DID=10.63.194.46,OID=1-1-17-1-1:CTAG::VIFTYPE=ServicePort,
VIFID=1,FORMAT=FLEXIBLE-SYNTAX;

7-51

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

Response:
ZTE-EB9A30BF27A 2013-02-04 16:18:05
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to change the port identification of
Rack1/Shelf1/Slot17/Port1/Onu1/ServicePort1 on 10.63.194.46.
No.5 Command :
CHG-PORTLOCATING::DID=10.63.194.43,PID=1-1-3-1-2:CTAG::VIFID=1,FORMAT=AAA;
Response:
ZTE-EB9A30BF27A 2013-03-05 16:18:05
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to change the port identification of
Rack1/Shelf1/Slot3/Port1/Pvc2 on 10.63.194.43. AAA is the syntax profile name.
No.6 Command :
CHG-PORTLOCATING::DID=10.63.174.165,PID=1-1-3-1:CTAG::VIFID=1,
FORMAT=FLEXIBLE-SYNTAX,DHCPSYNTAXPRF=TestDhcp,
PPPOESYNTAXPRF=TestPppoe;
Response:
ZTE-EB9A30BF27A 2013-03-10 16:18:05
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to change the DHCP and PPPoE syntax profile of
Rack1/Shelf1/Slot3/Port1 on 10.63.174.165.
No.7 Command :
CHG-PORTLOCATING::DID=10.63.194.43,PID=1-1-4-1:CTAG::FORMAT=AAA;
Response:
ZTE-EB9A30BF27A 2013-04-25 16:18:05
M CTAG COMPLD

7-52

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

EN=0 ENDESC=No Error

;
Remark:
This command is used to change the port identification of Rack1/Shelf1/Slot4/Port1
on 10.63.194.43. AAA is the syntax profile name.
No.8 Command :
CHG-PORTLOCATING::DID=10.63.194.43,PID=1-1-4-1:CTAG::REMOTEIDPRF=–;
Response:
ZTE-EB9A30BF27A 2013-04-25 16:18:05
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to delete the remote ID profile of Rack1/Shelf1/Slot4/Port1 on
10.63.194.43.
No.9 Command :
CHG-PORTLOCATING::DID=10.63.194.43,PID=1-1-3-1-2:CTAG::SERVICENAME=HIS,
FORMAT=AAA;
Response:
ZTE-EB9A30BF27A 2013-03-05 16:18:05
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to change the port identification of
Rack1/Shelf1/Slot3/Port1/Onu1/ServiceName HIS on 10.63.194.43. AAA is the
syntax profile name.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

7-53

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

Revision Date Notes

NetNumenU31R20V12.13.20T40 2013-4-10 New Command Parameters: DHCPSYN-

TAXPRF, PPPOESYNTAXPRF

NetNumenU31R20V12.13.20T40 2013-4-25 Change VIFID from Required to Optional

NetNumenU31R20V12.13.20T50 2013-7-12 New Command Parameters:

REMOTEIDPRF.
Change Value Range of VIFID from
1–128 to 1–256.

NetNumenU31R20V12.14.20T75 2014-4-4 New Command Parameters ：

SERVICENAME
NetNumenU31R20V12.15.20T90 2015-4-2 New Command Parameter Values:
FT, DT, SILKNET, VODAFONE,
BHARTIAIRTEL, CUC for FORMAT

NetNumenU31R20V12.17.20T115 2016-12-29 New Command Parameter Values:

DSL-FORUM-RACKFRAME

【Modify port of DHCP】

7.1.13 CHG-PORT-DHCP【 】
l Description
Modify the DHCP configuration of port.
l Applicable NE

NE Category NE Type Notes

PON OLT C220v1.2/C300 Series/C300v2 Series/C300v3 Series

MSAN MSAG5200V3/C300M Series/C300Mv4 Series

PON ONU xDSL-MDU Series/G.fast-MDU Series/LAN-MDU

Series

l Command Format
CHG-PORT-DHCP::(DID=device-id|DNAME=device-name),(PID=port-id|OID=oid):CTAG::
[VIFTYPE=virtual-interface-type,][(VIFID=vinterface-id|SERVICENAME=service-name),]
[OPTION82STAT=option82-status][,SNOOPINGSTAT=snooping-status]
[,TRUSTSTAT=trust-status][,TRUSTPOLICY=policy-value];
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

7-54

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

DID String SIZE(1-100) NE ID Required Under

Certain Conditions:
Must choose one
between DID and
DNAME

DNAME String SIZE(1-32) NE Name Required Under

Certain Conditions:
Must choose one
between DID and
DNAME

PID String rack-shelf-slot- Port ID(e.g 1-1-3-5) Required Under

port Certain Conditions:
Must choose one
between PID and OID

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU Under Certain
MacAddress while DID or DNAME Conditions:Must
SN/LOID/Pass- indicates the OLT choose one between
word device. PID and OID
(e.g.1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter

Parameter Type Value Range Description Optional

Name Description

VIFTYPE String VPort Virtual Interface Type. Optional

ServicePort (If VIFTYPE is not input, the
BrgPort default value is VPort when
operated target identifier is
ONU, and the default value is
BrgPort when operated target
identifier is physical port.)

VIFID Integer 1-256 Virtual Interface ID. Optional

SERVICE- String SIZE(1-64) Service Name. Optional

NAME

OPTION82 String Enable DHCP Option82 Status Optional

STAT Disable Not Supported by C300v3
Series.

SNOOP- String Enable DHCP Snooping Status Optional

INGSTAT Disable

7-55

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

TRUST- String Trust DHCP Trust Status For PON OLT

STAT Untrust and MSAN:
Must choose
TRUSTSTAT
and TRUST-
POLICY at
the same time
For PON
ONU:
Optional

TRUST- String Keep Trust Policy For PON OLT

POLICY Replace Keep: Retain the existing port and MSAN:
Discard identification information. Must choose
Add Replace: Overwrite port TRUSTSTAT
identification information. and TRUST-
Discard: Drop messages with POLICY at
port identification information. the same time
Add: Add port identification For PON
information. ONU: Not
For PON OLT and MSAN: applicable
If TRUSTSTAT is Trust,
TRUSTPOLICY should be
configured as Keep or Replace.
If TRUSTSTAT is Untrust,
TRUSTPOLICY should be
configured as Discard or Add.

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.

l Response Parameters
None.
l Error Code

DDOF, IIPE, EEH

Refer to Chapter 5 Unified Error Code Definition for more details.

l Example

No.1 Command :
CHG-PORT-DHCP::DID=10.63.196.242,OID=1-1-1-2-1:5::VIFID=1,
SNOOPINGSTAT=Enable;

Response:
ZTE-EB9A30BF27A 2010-09-27 10:55:49

7-56

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to modify the DHCP information of Rack1/Shelf1/Slot1/Port2
ONU 1 VPort 1 on NE 10.63.196.242.
No.2 Command :
CHG-PORT-DHCP::DID=10.63.196.242,OID=1-1-3-1:5::VIFID=1,OPTION82STAT=Enable;
Response:
ZTE-EB9A30BF27A 2010-09-27 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to modify the DHCP information of Rack1/Shelf1/Slot3/Port1
BridgePort 1 on NE 10.63.196.242.
No.3 Command :
CHG-PORT-DHCP::DID=10.63.196.242,OID=1-1-1-2-1:5::VIFID=1,OPTION82STAT=Enable,
TRUSTSTAT=Trust,TRUSTPOLICY=Keep;
Response:
ZTE-EB9A30BF27A 2010-09-27 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to modify the DHCP information of Rack1/Shelf1/Slot1/Port2
ONU 1 VPort 1 on NE 10.63.196.242.
No.4 Command :
CHG-PORT-DHCP::DID=DID=10.63.194.46,OID=1-1-17-1-1:5::VIFTYPE=ServicePort,
VIFID=1,OPTION82STAT=Disable,SNOOPINGSTAT=Enable,TRUSTSTAT=Untrust,
TRUSTPOLICY=Add;
Response:
ZTE-EB9A30BF27A 2013-02-04 16:18:05
M 5 COMPLD
EN=0 ENDESC=No Error

7-57

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

;
Remark:
This command is used to modify the DHCP information of Rack1/Shelf1/Slot17/Port1
ONU 1 ServicePort 1 on NE 10.63.194.46.
No.5 Command :
CHG-PORT-DHCP::DID=10.63.194.46,OID=1-1-17-1-1:5::VIFTYPE=VPort,SERVICENAME
=HIS,OPTION82STAT=Disable,SNOOPINGSTAT=Enable,
TRUSTSTAT=Untrust,TRUSTPOLICY=Add;
Response:
ZTE-EB9A30BF27A 2013-02-04 16:18:05
M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to modify the DHCP information of Rack1/Shelf1/Slot17/Port1
ONU 1 SERVICENAME HIS on NE 10.63.194.46.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.13.20T40 2013-4-25 Change VIFID from

Required to Optional.

NetNumenU31R20V12.13.20T50 2013-7-12 Change Value Range of

VIFID from 1–128 to 1–256.

NetNumenU31R20V12.14.20T70 2014-2-18 New Command

Parameters ：
SERVICENAME.

NetNumenU31R20V12.17.20T115 2016-12-29 New Applicable NEs：PON

ONU

7-58

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

【 Modify Port PPPoE Plus

7.1.14 CHG-PORT-PPPOEPLUS【
】
Information】
l Description
This command is used to modify port PPPoE plus information.
l Applicable NE

NE Category NE Type Notes

MSAN MSAG5200V3/C300M Series/C300Mv4 Series

PON OLT C220v1.1/C220v1.2/C300 Series/C300v2

Series/C300v3 Series

DSL Series xDSL-MDU Series

l Command Format
CHG-PORT-PPPOEPLUS::(DID=device-ID|DNAME=device-name),
(PID=portid|OID=oid):CTAG::[VIFTYPE=virtual-interface-type,]
(VIFID=vinterface-id|SERVICENAME=service-name),STATUS=pppoeplus-status
[,TRUSTSTAT=trust-status,TRUSTPOLICY=trust-policy];
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID(e.g 1-1-3-5) Required

port Under Certain
Conditions:Must
choose one between
PID and OID

7-59

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU Under Certain
MacAddress while DID or DNAME Conditions:Must
SN/LOID/Pass- indicates the OLT choose one between
word device. PID and OID
(e.g.1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter

Parameter Type Value Range Description Optional

Name Description

VIFTYPE String VPort Virtual Interface Type. Optional

ServicePort (If VIFTYPE is not input, the
BrgPort default value is VPort when
operated target identifier is
ONU, and the default value is
BrgPort when operated target
identifier is physical port.)

VIFID Integer 1-256 Virtual Interface ID. Optional

Not supported by DSL Series.

SERVICE- String SIZE(1-64) Service Name. Optional

NAME

STATUS String Enable PPPoE Plus Status Required

Disable

TRUST- String Trust PPPoE Plus Trust Status Optional:

STAT Untrust Must choose
TRUSTSTAT
and
TRUSTPOLICY
at the same time

TRUST- String Keep Trust Policy Optional:

POLICY Replace Keep: Retain the existing port Must choose
Discard identification information. TRUSTSTAT
Add Replace: Overwrite port and
identification information. TRUSTPOLICY
Discard: Drop messages with at the same time
port identification information.
Add: Add port identification
information.
If TRUSTSTAT is Trust,
TRUSTPOLICY should

7-60

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

be configured as Keep or
Replace. If TRUSTSTAT
is Untrust, TRUSTPOLICY
should be configured as
Discard or Add.

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
No.1 Command :
CHG-PORT-PPPOEPLUS::DID=10.63.156.129,PID=1-1-6-1:5::VIFID=1,STATUS=Disable;
Response:
ZTE-EB9A30BF27A 2010-05-19 10:18:28
M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to modify port PPPoE plus information of Rack1/
Shelf1/Slot6/Port1 on 10.63.156.129.
No.2 Command :
CHG-PORT-PPPOEPLUS::DID=10.63.194.46,OID=1-1-17-1-1:5::
VIFTYPE=ServicePort,VIFID=1,STATUS=Enable;
Response:
ZTE-EB9A30BF27A 2013-02-04 16:18:05
M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to modify port PPPoE plus information of
Rack1/Shelf1/Slot17/Port1/Onu1/ServicePort1 on 10.63.194.46.
No.3 Command :

7-61

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

CHG-PORT-PPPOEPLUS::DID=10.63.194.43,PID=1-1-4-1:5::STATUS=Disable;
Response:
ZTE-EB9A30BF27A 2013-04-25 10:18:28
M 5 COMPLD
EN=0 ENDESC=No Error
;
No.4 Command :
CHG-PORT-PPPOEPLUS::DID=10.63.194.46,OID=1-1-17-1-1:5::
VIFTYPE=ServicePort,SERVICENAME=HIS,STATUS=Enable;
Response:
ZTE-EB9A30BF27A 2013-02-04 16:18:05
M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to modify port PPPoE plus information of
Rack1/Shelf1/Slot17/Port1/Onu1/ServiceName HIS on 10.63.194.46.
No.5 Command :
CHG-PORT-PPPOEPLUS::DID=10.63.156.129,PID=1-1-6-1:5::VIFID=1,STATUS=Disable,
TRUSTSTAT=Untrust,TRUSTPOLICY=Add;
Response:
ZTE-EB9A30BF27A 2010-05-19 10:18:28
M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to modify port PPPoE plus information of Rack1/
Shelf1/Slot6/Port1 on 10.63.156.129.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

7-62

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

l Revision History

Revision Date Notes

NetNumenU31R20V12.13.20T40 2013-4-25 Change VIFID from Required to

Optional.

NetNumenU31R20V12.13.20T50 2013-7-12 Change Value Range of VIFID from

1–128 to 1–256.

NetNumenU31R20V12.14.20T75 2014-4-4 New Command Parameters：

SERVICENAME

NetNumenU31R20V12.14.20T75 2014-5-21 New Command Parameters：

TRUSTSTAT, TRUSTPOLICY

【Change ONU VoIP IP】

7.1.15 CHG-ONUVOIPIP【 】
l Description
This command is used to change GPON ONU VoIP configuration information.
l Applicable NE

NE Category NE Type Notes

PON OLT C220v1.2/C300 Series/C300v2 Series/C300v3 Series

l Command Format
CHG-ONUVOIPIP::(DID=device-id|DNAME=device-name)[,PID=port-id]
[,OID=onu-id]:CTAG::[ONUPROFILENAME=onu-profile-name],VLANPROFILENAME=
vlan-profile-name,IPHOSTID=iphost-id,IPMODE=ip-mode[,IPPROFILENAME=ip-profile-name]
[,IP=ip-address][,IPPREFIXLENGTH=ip-prefix-length][,PPPOEUSER=pppoe-user]
[,PPPOEPWD=pppoe-pwd][,ONUIDENTIFIER=onu-identifier];
l Operated Target Identifier

Parameter Type Value Range Description Optional

Name Description

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one
between DID and
DNAME

7-63

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one
between DID and
DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

por

OID String rack-shelf-slot- ONU ID. It's used to Required Under

port-onu identify the ONU while Certain Condi-
MacAddress DID or DNAME indicates tions:Must choose
SN/LOID/Pass- the OLT device. one between OID
word (e.g. 1-1-1-2-1 and ONUPRO-
00-18-FE-7C-64-E4 FILENAME
ZTEG54998768)

l Command Parameter

Parameter Type Value Range Description Optional

Name Description

ONUPRO- String SIZE(1-64) ONU Profile NAME Required Under Cer-

FILENAME tain Conditions:Must
choose one between
OID and ONUPRO-
FILENAME

VLANPRO- String SIZE(1-64) VLAN Profile Name Required

FILENAME

IPHOSTID Integer 1-255 IP Host ID Required

IPMODE String Static IP Allocation Mode Required

PPPoE Static: Static IP
DHCP PPPoE: PPPoE
DHCP: DHCP

IPPROFILE- String SIZE(1-64) IP Profile Name Optional:

NAME Required when
IPMODE is Static

IP String IpAddress IP Address Optional:

Valid when IPMODE is Required when
Static IPMODE is Static

7-64

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

IPPRE- Integer 0–128 IP Address Prefix Optional:

FIXLENGTH Length Required when
Valid when IPMODE is IPMODE is Static
Static

PPPOEUSER String SIZE(1-128) PPPoE User Name Optional:

Valid when IPMODE is Required when
PPPoE IPMODE is PPPoE

PPPOEPWD String SIZE(0-25) PPPoE Password Optional:

Valid when IPMODE is Required when
PPPoE IPMODE is PPPoE

ONUIDENTI- String SIZE(0-25) ONU Identifier Optional

FIER Valid when IPMODE is
DHCP

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CHG-ONUVOIPIP::DID=10.63.156.26,OID=1-1-5-7-1:CTAG::
VLANPROFILENAME=vlanProfile,IPHOSTID=1,IPMODE=Static,
IPPROFILENAME=ipProfile,IP=10.63.204.220,IPPREFIXLENGTH=24;
Response:
ZTE-SH10083644D01 2014-10-21 10:41:22
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to configure the ONU VoIP IP information of Rack1/
Shelf1/Slot5/Port7/ONU1 on 10.63.156.26, and IP allocation mode is static IP.
Command 2:
CHG-ONUVOIPIP::DID=10.63.156.26,OID=1-1-5-7-1:CTAG::
VLANPROFILENAME=vlanProfile,IPHOSTID=1,IPMODE=PPPoE,
PPPOEUSER=zte,PPPOEPWD=zte123;

7-65

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

Response:
ZTE-SH10083644D01 2014-10-21 10:41:22
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to configure the ONU VoIP IP information of Rack1/
Shelf1/Slot5/Port7/ONU1 on 10.63.156.26, and IP allocation mode is PPPoE.
Command 3:
CHG-ONUVOIPIP::DID=10.63.156.26,OID=1-1-5-7-1:CTAG::
VLANPROFILENAME=vlanProfile,IPHOSTID=1,IPMODE=DHCP;
Response:
ZTE-SH10083644D01 2014-10-21 10:41:22
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to configure the ONU VoIP IP information of Rack1/
Shelf1/Slot5/Port7/ONU1 on 10.63.156.26, and IP allocation mode is DHCP.
Command 4:
CHG-ONUVOIPIP::DID=10.63.156.26:CTAG::ONUPROFILENAME=remote-profile,
VLANPROFILENAME=vlanProfile,IPHOSTID=1,IPMODE=Static,IPPROFILENAME=
ipProfile,IP=10.63.204.220,IPPREFIXLENGTH=24;
Response:
ZTE-SH10083644D01 2017-04-21 10:41:22
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to modify VoIP IP of ONU profile remote-profile on NE
10.63.156.26.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

7-66

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.14.20T80 2014-10-30 New TL1 Command

NetNumenU31R20V12.17.20T120 2017-4-27 New Command

Parameters ：
ONUPROFILENAME

【Delete ONU VoIP IP Configuration】

7.1.16 DLT-ONUVOIPIP【 】
l Description
This command is used to delete GPON ONU VoIP configuration inforamtion.
l Applicable NE

NE Category NE Type Not-

es

PON OLT C220v1.2/C300 Series/C300v2 Series/C300v3 Series

MSAN C300Mv4 Series

l Command Format
DLT-ONUVOIPIP::(DID=device-ID|DNAME=device-name)[,PID=port-id][,OID=onu-id]:CTAG::

[ONUPROFILENAME=onu-profile-name];
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

7-67

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

por

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU Under Certain
MacAddress while DID or DNAME Conditions:Must
SN/LOID/Pass- indicates the OLT choose one
word device. between OID and
(e.g. 1-1-1-2-1 ONUPROFILENAME
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter

Parameter Type Value Description Optional Description

Name Range

ONUPRO- String SIZE(1- ONU Profile Required Under Certain

FILENAME 64) Name Conditions:Must choose one between
OID and ONUPROFILENAME

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
DLT-ONUVOIPIP::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::;
Response：
ZTE-SH10083644D01 2014-03-18 10:41:22
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to delete GPON ONU VoIP IP configuration information from
Rack1/Shelf1/Slot5/Port7/ONU1 on 10.63.204.51.
Command 2:

7-68

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

DLT-ONUVOIPIP::DID=10.63.204.51:CTAG::ONUPROFILENAME=remote-profile;
Response：
ZTE-SH10083644D01 2017-04-25 10:41:22
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to delete GPON ONU VoIP IP configuration information from
ONU profile remote-profile on NE 10.63.204.51.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.14.20T80 2014-10-30 New TL1 Command

NetNumenU31R20V12.17.20T120 2017-4-25 New Command Parameters:

ONUPROFILENAME

【Create ONU SIP User】

7.1.17 CRT-ONUSIPUSER【 】
l Description
This command is used to create ONU SIP user information.
l Applicable NE

NE Category NE Type Notes

PON OLT C220v1.2/C300 Series/C300v2 Series/C300v3 Series

MSAN C300Mv4 Series

l Command Format
CRT-ONUSIPUSER::(DID=device-id|DNAME=device-name)[,PID=port-id],
OID=onu-id,ONUPORT=onu-port:CTAG::USERPHONE=user-phone,
[SIPPROFILENAME=sip-profile-name][,USERNAME=user-name][,

7-69

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

AUTHUSERNAME=auth-user-name][,AUTHPASSWORD=auth-password][,
MEDIAPROFILENAME=media-profile-name];
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

por

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU
MacAddress while DID or DNAME
SN/LOID/Pass- indicates the OLT
word device.
(e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

ONUPORT String [rack-][shelf-][slo- UNI Port of ONU Required

t-]port (e.g. 3-2: slot3-port2
If no slot, 2: port2
1-1-3-2: rack1-shelf1-
slot3-port2)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

USER- String SIZE(1-128) User Phone Number Required

PHONE

SIPPRO- String SIZE(1-64) SIP Profile Name Optional

FILENAME Only support GPON. It
is required for GPON.

7-70

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

USER- String SIZE(1-25) User Name Optional

NAME

AU- String SIZE(1-50) User Authentication Optional

THUSER- Name
NAME

AUTH- String SIZE(0-25) User Authentication Optional

PASS- Password
WORD

MEDI- String SIZE(1-64) Media Profile Name Optional

APROFILE- Only support GPON.
NAME

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CRT-ONUSIPUSER::DID=10.63.204.51,OID=1-1-5-7-1,ONUPORT=1:CTAG::
USERPHONE=12354678,SIPPROFILENAME=testSipProfile,USERNAME=sip001,
AUTHUSERNAME=uer1,AUTHPASSWORD=aa;
Response:
0 2013-08-20 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create the ONU SIP user of Rack1/
Shelf1/Slot5/Port7/ONU1/POTS1 on 10.63.204.51.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

7-71

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.14.20T80 2014-09-11 New TL1 Command

【Delete ONU SIP User】

7.1.18 DLT-ONUSIPUSER【 】
l Description
This command is used to delete ONU SIP user information.
l Applicable NE

NE Category NE Type Notes

PON OLT C220v1.2/C300 Series/C300v2 Series/C300v3 Series

MSAN C300Mv4 Series

l Command Format
DLT-ONUSIPUSER::(DID=device-id|DNAME=device-name)[,PID=port-id],OID=onu-id,
ONUPORT=onu-port:CTAG::;
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

por

7-72

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU
MacAddress while DID or DNAME
SN/LOID/Pass- indicates the OLT
word device.
(e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

ONUPORT String [rack-][shelf-][slo- UNI Port of ONU Required

t-]port (e.g. 3-2: slot3-port2
If no slot, 2: port2
1-1-3-2: rack1-shelf1-
slot3-port2)

l Command Parameter
None.
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
DLT-ONUSIPUSER::DID=10.63.204.51,OID=1-1-5-7-1,ONUPORT=1:CTAG::;
Response::
0 2013-08-20 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to delete the ONU SIP user of Rack1/
Shelf1/Slot5/Port7/ONU1/POTS1 on 10.63.204.51.
l Average Command Response Time

Scenario Average Response Time (s)

7-73

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.14.20T80 2014-09-11 New TL1 Command

【 Change ONU Administrative

7.1.19 CHG-ONU-STAT-PON【
】
Status】
l Description
This command is used to change ONU administrative status.
l Applicable NE

NE Category NE Type Notes

PON OLT C220v1.1/C220v1.2/C300 Series/C300v2 Series/C300v3

Series

l Command Format
CHG-ONU-STAT-PON::(DID=device-ID|DNAME=device-name),OID=onu-ID:
CTAG::STATUS=adminstatus;

l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(0-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(0-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

7-74

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU
MacAddress while DID or DNAME
SN/LOID/Pass- indicates the OLT
word device.
(e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter

Parameter Name Type Value Range Description

STATUS Integer 1–Enable ONU Administrative Status

2–Disable

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF、IIPE、EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CHG-ONU-STAT-PON::DID=10.46.41.14,OID=1-1-8-1-1:CTAG::STATUS=Enable;
应答：
NETSH180492D1 2012-07-04 16:54:48
M 5 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to enable administrative status of
Rack1/Shelf1/Slot8/Port1/ONU1 on 10.46.41.14.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

7-75

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.14.20T70 2014–02–20

【Restart ONU】
7.1.20 RST-ONU-PON【 】
l Description
This command is used to restart the specified ONU.
l Applicable NE

NE Category NE Type Notes

PON OLT C220v1.2/C300 Series/C300v2 Support EPON and GPON

Series/C300v3 Series

l Command Format
RST-ONU-PON::(DID=device-ID|DNAME=device-name) ,OID=onu-id:CTAG::;
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required Under

Certain Conditions:
Must choose one
between DID and
DNAME

DNAME String SIZE(1-32) NE Name Required Under

Certain Conditions:
Must choose one
between DID and
DNAME

7-76

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU
MacAddress while DID or DNAME
SN/LOID/Pass- indicates the OLT
word device.
(e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command:
RST-ONU-PON::DID=10.46.41.14,OID=1-1-6-1-1:CTAG001::;
Response：
XUZHILU 2012-02-10 16:38:06
M Ctag001 COMPLD
EN=0 ENDESC=No Error;
Remark:
This command is used to restart Rack1/Shelf1/Slot6/Port1/ONU1 on OLT 10.46.41.14.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

7-77

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

【Activate LAN Port】

7.1.21 ACT-LANPORT【 】
l Description
This command is used for activating the LAN port.
l Applicable NE

NE Category NE Type Notes

PON OLT C220v1.2/C300 Series/C300v2 Series/C300v3

Series

PON ONU F820/LAN-MDU Series/xDSL-MDU Series/FTTH

ONU

l Command Format

ACT-LANPORT::ONUIP=onu-name|OLTID=olt-name[,PONID=ponport_location,
ONUIDTYPE=onuid-type,ONUID=onu-index],ONUPORT=onu-port:CTAG::;
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

ONUIP String SIZE(128) IP address, name, or Required

ID of the ONU that has Under Certain
management IP Conditions:Must
choose one between
ONUIP and OLTID

OLTID String SIZE(128) OLT IP address, name, Required

or ID Under Certain
Conditions:Must
choose one between
ONUIP and OLTID

PONID String SIZE(128) To locate a PON port by Optional:PONID

Rack–Shelf–Slot- Rack-Shelf-Slot-PON ONUIDTYPE and
–PON Port Port ID. Type NA ONUID must choose at
when this parameter is the same time
absent.

ONUID- String SIZE(128) ONU identifier type Optional:PONID

TYPE (ONU_NAME, MAC, ONUIDTYPE and
LOID, ONU_NUMBER) ONUID must choose at
the same time

7-78

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

ONUID String SIZE(128) ONU identifier. The Optional:PONID

value could be chosen ONUIDTYPE and
from ONU_NAME, ONUID must choose at
MAC, LOID and the same time
ONU_NUMBER to
uniquely identify an
ONU on the PON port.

ONUPORT String SIZE(128) To locate an Required

Rack-Shelf-Slot- ONU port by
ONU Port ID Rack-Shelf-Slot-ONU
Port ID. Type NA
when this parameter is
absent.

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
None.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Modifier Notes

【Deactivate LAN Port】

7.1.22 DACT-LANPORT【 】
l Description

7-79

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

This command is used for deactivating the LAN port.

l Applicable NE

NE Category NE Type Notes

PON OLT C220v1.2/C300 Series/C300v2 Series/C300v3

Series

PON ONU F820/LAN-MDU Series/xDSL-MDU Series/FTTH

ONU

l Command Format

DACT-LANPORT::ONUIP=onu-name|OLTID=olt-name[,PONID=ponport_location,ONUIDTYPE=onu
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

ONUIP String SIZE(128) IP address, name, or Required

ID of the ONU that has Under Certain
management IP Conditions:Must
choose one between
ONUIP and OLTID

OLTID String SIZE(128) OLT IP address, name, Required

or ID Under Certain
Conditions:Must
choose one between
ONUIP and OLTID

PONID String SIZE(128) To locate a PON port by Optional:PONID

Rack–Shelf–Slot- Rack-Shelf-Slot-PON ONUIDTYPE and
–PON Port Port ID. Type NA ONUID must choose at
when this parameter is the same time
absent.

ONUID- String SIZE(128) ONU identifier type Optional:PONID

TYPE (ONU_NAME, MAC, ONUIDTYPE and
LOID, ONU_NUMBER) ONUID must choose at
the same time

ONUID String SIZE(128) ONU identifier. The Optional:PONID

value could be chosen ONUIDTYPE and
from ONU_NAME, ONUID must choose at
MAC, LOID and the same time
ONU_NUMBER to
uniquely identify an
ONU on the PON port.

7-80

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

ONUPORT String SIZE(128) To locate an Required

Rack-Shelf-Slot- ONU port by
ONU Port ID Rack-Shelf-Slot-ONU
Port ID. Type NA
when this parameter is
absent.

l Response Format

Refer to Section 4.2.2.2 for detailed TL1 command response format.

l Response Parameters
None.

l Error Code
DDOF, IIPE
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
None.

l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Modifier Notes

【Activate VoIP Port】

7.1.23 ACT-VOIPPORT【 】
l Description

This command is used for activating the VoIP port.

l Applicable NE

NE Category NE Type Notes

PON OLT C220v1.2/C300 Series

7-81

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

PON ONU F820/LAN-MDU Series/xDSL-MDU Series/FTTH

ONU

l Command Format
ACT-VOIPPORT::ONUIP=onu-name|[OLTID=olt-name,PONID=ponport_location,
ONUIDTYPE=onuid-type,ONUID=onu-index],ONUPORT=onu-port:CTAG::;
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

ONUIP String SIZE(128) IP address, name, or Required Under Cer-

ID of the ONU that has tain Conditions:Must
management IP choose one between
ONUIP and (OLT-
ID,PONID,ONUID-
TYPE,ONUID)

OLTID String SIZE(128) OLT IP address, name, Required Under Cer-

or ID tain Conditions:Must
choose one between
ONUIP and (OLT-
ID,PONID,ONUID-
TYPE,ONUID)

PONID String SIZE(128) To locate a PON port by Required Under Cer-

Rack-Shelf-Slot- Rack-Shelf-Slot-PON tain Conditions:Must
PON Port ID Port ID. Type NA choose one between
when this parameter is ONUIP and (OLT-
absent. ID,PONID,ONUID-
TYPE,ONUID)

ONUID- String SIZE(128) ONU identifier type Required Under Cer-

TYPE (ONU_NAME, MAC, tain Conditions:Must
LOID, ONU_NUMBER) choose one between
ONUIP and (OLT-
ID,PONID,ONUID-
TYPE,ONUID)

ONUID String SIZE(128) ONU identifier. The Required Under Cer-

value could be chosen tain Conditions:Must
from ONU_NAME, choose one between
MAC, LOID and ONUIP and (OLT-
ONU_NUMBER to ID,PONID,ONUID-
uniquely identify an TYPE,ONUID)
ONU on the PON port.

7-82

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

ONUPORT String SIZE(128) To locate an Required

Rack-Shelf-Slot- ONU port by
ONU Port ID Rack-Shelf-Slot-ONU
Port ID. Type NA
when this parameter is
absent.

l Response Format

Refer to Section 4.2.2.2 for detailed TL1 command response format.

l Response Parameters
None.

l Error Code
DDOF, IIPE
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
None.

l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Modifier Notes

【Deactivate VoIP Port】

7.1.24 DACT-VOIPPORT【 】
l Description

This command is used for deactivating the VoIP port.

l Applicable NE

NE Category NE Type Notes

PON OLT C220v1.2/C300 Series

7-83

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

PON ONU F820/LAN-MDU Series/xDSL-MDU Series/FTTH

ONU

l Command Format
DACT-VOIPPORT::ONUIP=onu-name|[OLTID=olt-name,PONID=ponport_location,
ONUIDTYPE=onuid-type,ONUID=onu-index],ONUPORT=onu-port:CTAG::;
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

ONUIP String SIZE(128) IP address, name, or Required Under Cer-

ID of the ONU that has tain Conditions:Must
management IP choose one between
ONUIP and (OLT-
ID,PONID,ONUID-
TYPE,ONUID)

OLTID String SIZE(128) OLT IP address, name, Required Under Cer-

or ID tain Conditions:Must
choose one between
ONUIP and (OLT-
ID,PONID,ONUID-
TYPE,ONUID)

PONID String SIZE(128) To locate a PON port by Required Under Cer-

Rack-Shelf-Slot- Rack-Shelf-Slot-PON tain Conditions:Must
PON Port ID Port ID. Type NA choose one between
when this parameter is ONUIP and (OLT-
absent. ID,PONID,ONUID-
TYPE,ONUID)

ONUID- String SIZE(128) ONU identifier type Required Under Cer-

TYPE (ONU_NAME, MAC, tain Conditions:Must
LOID, ONU_NUMBER) choose one between
ONUIP and (OLT-
ID,PONID,ONUID-
TYPE,ONUID)

ONUID String SIZE(128) ONU identifier. The Required Under Cer-

value could be chosen tain Conditions:Must
from ONU_NAME, choose one between
MAC, LOID and ONUIP and (OLT-
ONU_NUMBER to ID,PONID,ONUID-
uniquely identify an TYPE,ONUID)
ONU on the PON port.

7-84

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

ONUPORT String SIZE(128) To locate an Required

Rack-Shelf-Slot- ONU port by
ONU Port ID Rack-Shelf-Slot-ONU
Port ID. Type NA
when this parameter is
absent.

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
None.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Modifier Notes

【Change WAN IP configuration】

7.1.25 CHG-ONUWANIP【 】
l Description
This command is used to change WAN IP configuration mode when the WAN on the
ONU is routed, the IP configuration mode is consisted of Static, PPPoE, DHCP.
l Applicable NE

NE Category NE Type Notes

PON OLT C220v1.2/C300 Series/C300v2 Series/C300v3 Series

7-85

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

MSAN C300Mv4 Series

l Command Format
CHG-ONUWANIP::(DID=device-id|DNAME=device-name)[,PID=port-id],OID=onu-id
:CTAG::IPHOSTID=iphost-id[,IPMODE=ip-mode][,ONUIDENTIFIER=onu-identifier]
[,IP=ip-address][,IPMASKLEN=ip-mask-length][,(IPPROFILENAME=ip-profile-name
|IPGATEWAY=ip-gateway)][,PPPOEUSER=pppoe-user][,PPPOEPWD=pppoe-pwd]
(,VLANPROFILENAME=vlan-profile-name|VID=vlan-id)[,PPPOEMODE=pppoe-mode]
[,PPPOESERVICENAME=pppoe-service-name];

l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

por

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU
MacAddress while DID or DNAME
SN/LOID/Pass- indicates the OLT
word device.
(e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

IPHOSTID Integer 1-255 IP Host ID Required

7-86

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

IPMODE String Static IP Configuration Mode Optional

PPPoE If not input, the default
DHCP mode will be PPPoE.
Static: Static IP
PPPoE: PPPoE
DHCP: DHCP

ONUIDENTI- String SIZE(0-25) ONU Identifier Optional

FIER Valid if IPMODE is
DHCP

IP String IpAddress IP Address Optional:

Valid if IPMODE is Required if IPMODE is
Static Static

IPMASKLEN Integer 1–255 IP Mask Length Optional:

Valid if IPMODE is Required if IPMODE is
Static Static

IPPROFILE- String SIZE(1-64) IP Profile Name Optional:

NAME Required if IPMODE is
Static,
then must choose
one between
IPPROFILENAME
and IPGATEWAY.

IPGATEWAY String IpAddress IP Gateway Optional:

Valid if IPMODE is Required if IPMODE is
Static Static,
then must choose
one between
IPPROFILENAME
and IPGATEWAY.

PP- String SIZE(1-32) PPPoE User Name Optional:

POEUSER Valid if IPMODE is Required if IPMODE is
PPPoE PPPoE

PPPOEPWD String SIZE(1-32) PPPoE Password Optional:

Valid if IPMODE is Required if IPMODE is
PPPoE PPPoE

VLANPRO- String SIZE(1-64) VLAN Profile Name Required

FILENAME Under Certain
Conditions:Must
choose one between
VLANPROFILENAME
and VID

7-87

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

VID Integer 1-4094 VLAN ID for WAN Required

if not input, the VID Under Certain
of WAN will be not Conditions:Must
changed choose one between
VLANPROFILENAME
and VID

PPPOE- String Auto PPPoE Mode Optional

MODE Chap Valid if IPMODE is
Pap PPPoE
If not input, the default
mode will be Auto

PPPOESER- String SIZE(1-60) PPPoE Service Name Optional

VICENAME Valid if IPMODE is
PPPoE

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.

l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example

Command 1:
CHG-ONUWANIP::DID=10.63.156.26,OID=1-1-5-7-1:CTAG::IPHOSTID=1,IPMODE=PPPoE,
PPPOEUSER=zte,PPPOEPWD=ztewan,VLANPROFILENAME=VLAN100;
Response:

ZTE-SH10083644D01 2013-12-17 10:01:22

M CTAG COMPLD

EN=0 ENDESC=No Error

;
Remark:

This command is used to configure ONU WAN IP information of

Rack1/Shelf1/Slot5/Port7/ONU1 on 10.63.156.26, and IP allocation mode is PPPoE.
Command 2:

7-88

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

CHG-ONUWANIP::DID=10.63.156.26,OID=1-1-5-7-1:CTAG::IPHOSTID=1,IPMODE=PPPoE,
PPPOEUSER=zte,PPPOEPWD=ztewan,VID=100;
Response:
ZTE-SH10083644D01 2013-12-17 10:01:22
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to configure ONU WAN IP information of
Rack1/Shelf1/Slot5/Port7/ONU1 on 10.63.156.26, and IP allocation mode is PPPoE.
Command 3:
CHG-ONUWANIP::DID=10.63.156.26,OID=1-1-5-7-1:CTAG::IPHOSTID=1,IPMODE=DHCP,
VLANPROFILENAME=VLAN100;
Response:

ZTE-SH10083644D01 2013-12-17 10:01:22

M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to configure ONU WAN IP information of
Rack1/Shelf1/Slot5/Port7/ONU1 on 10.63.156.26, and IP allocation mode is DHCP.
Command 4:
CHG-ONUWANIP::DID=10.63.156.26,OID=1-1-5-7-1:CTAG::IPHOSTID=1,

IPMODE=DHCP,VID=100;
Response:
ZTE-SH10083644D01 2013-12-17 10:01:22

M CTAG COMPLD
EN=0 ENDESC=No Error

;
Remark:

This command is used to configure ONU WAN IP information of

Rack1/Shelf1/Slot5/Port7/ONU1 on 10.63.156.26, and IP allocation mode is DHCP.
Command 5:

CHG-ONUWANIP::DID=10.63.156.26,OID=1-1-5-7-1:CTAG::IPHOSTID=1,IPMODE=Static,

7-89

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

IP=10.63.204.220,IPGATEWAY=10.63.204.254,IPMASKLEN=24,
VLANPROFILENAME=VLAN100;
Response:
ZTE-SH10083644D01 2013-12-17 10:01:22
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to configure ONU WAN IP information of
Rack1/Shelf1/Slot5/Port7/ONU1 on 10.63.156.26, and IP allocation mode is static IP.
Command 6:
CHG-ONUWANIP::DID=10.63.156.26,OID=1-1-5-7-1:CTAG::IPHOSTID=1,IPMODE=Static,
IP=10.63.204.220,IPGATEWAY=10.63.204.254,IPMASKLEN=24,VID=100;
Response:
ZTE-SH10083644D01 2013-12-17 10:01:22
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to configure ONU WAN IP information of
Rack1/Shelf1/Slot5/Port7/ONU1 on 10.63.156.26, and IP allocation mode is static IP.
Command 7:
CHG-ONUWANIP::DID=10.63.156.26,OID=1-1-5-7-1:CTAG::VLANPROFILENAME=VLAN100,
IPHOSTID=1,IPMODE=PPPoE,PPPOEUSER=zte,PPPOEPWD=ztewan,
PPPOESERVICENAME=servicewan;
Response:
ZTE-SH10083644D01 2017-02-27 10:41:22
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to configure ONU WAN IP information of
Rack1/Shelf1/Slot5/Port7/ONU1 on 10.63.156.26, and IP allocation mode is PPPoE,
PPPoE service name is servicewan.
l Average Command Response Time

7-90

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.13.40T70 2014-1-8 New Command Parameters:IP-

MODE,IP,IPMASKLEN,IPGATE-
WAY,ONUIDENTIFIER

NetNumenU31R20V12.15.20T90 2015-4-28 New Command Parameters:IPPRO-

FILENAME,VLANPROFILENAME

NetNumenU31R20V12.17.20T115 2017-2-27 New Command Parameters:PPPOE-

SERVICENAME

【Delete WAN IP Configuration】

7.1.26 DLT-ONUWANIP【 】
l Description
This command is used to delete ONU WAN IP configuration.
l Applicable NE

NE Category NE Type Notes

PON OLT C220v1.2/C300 Series/C300v2 Series

l Command Format
DLT-ONUWANIP::(DID=device-id|DNAME=device-name)[,PID=port-id][,OID=onu-id]:

CTAG::[ONUPROFILENAME=onu-profile-name],IPHOSTID=iphost-id;
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

7-91

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

DID String SIZE(1-100) NE ID Required Under

Certain Conditions:
Must choose one
between DID and
DNAME

DNAME String SIZE(1-32) NE Name Required Under

Certain Conditions:
Must choose one
between DID and
DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

por

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU Under Certain
MacAddress while DID or DNAME Conditions:Must
SN/LOID/Pass- indicates the OLT choose one
word device. between OID and
(e.g. 1-1-1-2-1 ONUPROFILENAME
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

ONUPRO- String SIZE(1-64) ONU Profile Name Required

FILENAME Under Certain
Conditions:Must
choose one
between OID and
ONUPROFILENAME

IPHOSTID Integer 1-255 IP Host ID Required

l Response Format

Refer to Section 4.2.2.2 for detailed TL1 command response format.

l Response Parameters

None.
l Error Code

7-92

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

DDOF, IIPE, EEH

Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
DLT-ONUWANIP::DID=10.63.194.46,OID=1-1-5-7-1:CTAG::IPHOSTID=2;
Response:
ZTE-SH10083644D01 2014-03-18 10:01:22
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to delete WAN IP configuration associated with IP Host 2 of
Rack1/Shelf1/Slot5/Port7/ONU1 on OLT 10.63.194.46.
Command 2:
DLT-ONUWANIP::DID=10.63.194.46:CTAG::ONUPROFILENAME=remoteProfile,
IPHOSTID=2;
Response:
ZTE-SH10083644D01 2017-05-18 10:01:22
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to delete GPON ONU WAN IP configuration information from
ONU profile remoteProfile on NE 10.63.194.46.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.13.40T70 2014-3-20 New TL1 Command

7-93

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

NetNumenU31R20V12.17.20T120 2017-5-25 New Command Parameters:

ONUPROFILENAME

【Change WAN configuration】

7.1.27 CHG-ONUWAN【 】
l Description
This command is used to change WAN configuration.
l Applicable NE

NE Category NE Type Notes

PON OLT C220v1.2/C300 Series

l Command Format
CHG-ONUWAN::(DID=device-id|DNAME=device-name)[,PID=port-id],OID=onu-id
:CTAG::WANID=wan-id[,IPHOSTID=iphost-id],SERVICETYPE=service-type
[,UNILIST=uni-list][,SSIDLIST=ssid-list][,MVLAN=mvlan-id];
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

por

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU
MacAddress while DID or DNAME
SN/LOID/Pass- indicates the OLT
word device.
(e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter

7-94

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

Parameter Type Value Range Description Optional Description

Name

WANID Integer 1-255 WAN ID Required

IPHOSTID Integer 1-255 IP Host ID Optional:

if not input, WAN is Required if WAN is
bridged routed

SERVICE- String Internet Service Type Required

TYPE TR069 Support multiple
VoIP choices. The type
Other should be separated by
a left slash if multiple
ones are selected
e.g. Inter-
net/TR069/VoIP

UNILIST String SIZE(0-100) Associated UNIs Optional

if not input, WAN does
not associate with any
UNI ports.
Support multiple
choices. The UNI port
should be separated by
a left slash if multiple
ones are selected
e.g. 1/2/3/5

SSIDLIST String SIZE(0-100) Associated SSIDs Optional

if not input, WAN does
not associate with any
SSIDs.
Support multiple
choices. The SSID
should be separated by
a left slash if multiple
ones are selected
e.g. 1/2/3/5

MVLAN Integer 1–4094 MVLAN Optional:

Required if
SERVICETYPE
contains ‘Other’

l Response Format

Refer to Section 4.2.2.2 for detailed TL1 command response format.

l Response Parameters

7-95

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CHG-ONUWAN::DID=10.63.156.26,OID=1-1-5-7-1:CTAG::WANID=1,IPHOSTID=1,
SERVICETYPE=Internet;
应答：
ZTE-SH10083644D01 2013-12-17 10:41:22
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to configure routed WAN 1 in Port1 of
Rack1/Shelf1/Slot5/Port7/ONU1 on 10.63.156.26, and set associated IP Host to IP
Host 1, set service type to Internet. This WAN does not associate with any SSIDs or
UNI ports.
Command 2:
CHG-ONUWAN::DID=10.63.156.26,OID=1-1-5-7-1:CTAG::WANID=1,SERVICETYPE=Internet,
UNILIST=1/2,SSIDLIST=1;
应答：
ZTE-SH10083644D01 2013-12-17 10:41:22
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to configure bridged WAN 1 in Port1 of
Rack1/Shelf1/Slot5/Port7/ONU1 on 10.63.156.26, set service type to Internet. This
WAN associates with SSID 1 and UNI port 1,2.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

7-96

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.13.40T70 2014-01-08 New TL1 Command

【Delete WAN configuration】

7.1.28 DLT-ONUWAN【 】
l Description
This command is used to delete WAN configuration.

l Applicable NE

NE Category NE Type Notes

PON OLT C220v1.2/C300 Series/C300v2 Series

l Command Format
DLT-ONUWAN::(DID=device-id|DNAME=device-name)[,PID=port-id],OID=onu-id:
CTAG::WANID=wan-id;
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required Under

Certain Conditions:
Must choose one
between DID and
DNAME

DNAME String SIZE(1-32) NE Name Required Under

Certain Conditions:
Must choose one
between DID and
DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

por

7-97

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU
MacAddress while DID or DNAME
SN/LOID/Pass- indicates the OLT
word device.
(e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

WANID Integer 1-255 WAN ID Required

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
DLT-ONUWAN::DID=10.63.194.46,OID=1-1-5-7-1:CTAG::WANID=1;
Response：
ZTE-SH10083644D01 2014-03-18 10:41:22
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to delete WAN 1 configuration of
Rack1/Shelf1/Slot5/Port7/ONU1 on OLT 10.63.194.46.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

7-98

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.13.40T70 2014-03-20 New TL1 Command

【Create ONU GEM Port】

7.1.29 CRT-ONU-GEMPORT【 】
l Description
This command is used to create an ONU GEM port.
l Applicable NE

NE Category NE Type Notes

PON OLT C300v2 Series/C300v3 Series

l Command Format

CRT-ONU-GEMPORT::(DID=device-id|DNAME=device-name)[,PID=port-id][,
OID=onu-id]:CTAG::[ONUPROFILENAME=onu-profile-name],ONUGEMPORTID=onu-gemport-id
TCONTID=tcont-id[,GEMPORTNAME=gemport-name][,ADMINSTAT=administrative-status]
[,GEMPORTID=gemport-id]
[,TCONTQUEUE=tcont-queue][,USTRAFFICPROFILENAME=upstream-traffic-profile-name]
[,DSTRAFFICPROFILENAME=downstream-traffic-profile-name];
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

por

7-99

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU Under Certain
MacAddress while DID or DNAME Conditions:Must
SN/LOID/Pass- indicates the OLT choose one
word device. between OID and
(e.g. 1-1-1-2-1 ONUPROFILENAME
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

ONUPRO- String SIZE(1-64) ONU Profile NAME Required

FILENAME Under Certain
Conditions:Must
choose one
between OID and
ONUPROFILENAME

ONUGEM- Integer 1-255 ONU GEM Port ID Required

PORTID

TCONTID Integer 1-255 T-CONT ID Required

GEMPORT- String SIZE(1-64) GEM Port NAME Optional

NAME

ADMIN- String Enable Administrative Status Optional

STAT Disable

GEMPOR- Integer 129-4095 Port-ID of GEM Port Optional

TID

TCON- Integer 0-7 T-CONT Queue Optional

TQUEUE

USTRAF- String SIZE(1-64) Upstream Traffic Profile Optional

FICPRO- Name
FILENAME

DSTRAF- String SIZE(1-64) Downstream Traffic Optional

FICPRO- Profile Name
FILENAME

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.

7-100

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CRT-ONU-GEMPORT::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::ONUGEMPORTID=1,
TCONTID=1,USTRAFFICPROFILENAME=5M,DSTRAFFICPROFILENAME=10M;
Response:
0 2015-05-20 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create the ONU GEM port of
Rack1/Shelf1/Slot5/Port7/ONU1 on 10.63.204.51.
Command 2:
CRT-ONU-GEMPORT::DID=10.63.204.51:CTAG::ONUPROFILENAME=line-profile,
ONUGEMPORTID=1,TCONTID=1,USTRAFFICPROFILENAME=5M,
DSTRAFFICPROFILENAME=10M;
Response:
0 2017-04-20 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create a GEM port of ONU profile line-profile on NE
10.63.204.51.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

7-101

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

Revision Date Notes

NetNumenU31R20V12.15.20T90 2015-6-16 New TL1 Command

NetNumenU31R20V12.17.20T120 2017-4-27 New Command

Parameters ：
ONUPROFILENAME

【Delete ONU GEM Port】

7.1.30 DLT-ONU-GEMPORT【 】
l Description
This command is used to delete an ONU GEM port.
l Applicable NE

NE Category NE Type Notes

PON OLT C300 Series/C300v2 Series/C300v3 Series

MSAN C300Mv4 Series

l Command Format
DLT-ONU-GEMPORT::(DID=device-id|DNAME=device-name)[,PID=port-id][,OID=onu-id]
:CTAG::[ONUPROFILENAME=onu-profile-name,]ONUGEMPORTID=onu-gemport-id;
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

port

7-102

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU Under Certain
MacAddress while DID or DNAME Conditions:Must
SN/LOID/Pass- indicates the OLT choose one
word device. between OID and
(e.g. 1-1-1-2-1 ONUPROFILENAME
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

ONUPRO- String SIZE(1-64) ONU Profile Required Under Certain

FILENAME Name Conditions:Must choose
one between OID and
ONUPROFILENAME

ONUGEM- Integer 1-255 ONU GEM Port Required

PORTID ID

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
DLT-ONU-GEMPORT::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::ONUGEMPORTID=1;
Response:
0 2015-05-20 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to delete the ONU GEM port of
Rack1/Shelf1/Slot5/Port7/ONU1 on 10.63.204.51.
Command 2:

7-103

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

DLT-ONU-GEMPORT::DID=10.63.204.51:CTAG::ONUPROFILENAME=line-profile,
ONUGEMPORTID=1;
Response:
0 2017-04-25 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to delete a GEM port from ONU profile line-profile on NE
10.63.204.51.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.16.20T110 2016-10-31 New TL1 Command

NetNumenU31R20V12.17.20T120 2017-4-25 New Command Parameters：

ONUPROFILENAME

【Create ONU MVLAN】

7.1.31 CRT-ONU-MVLAN【 】
l Description
This command is used to create an ONU MVLAN.
l Applicable NE

NE Category NE Type Notes

PON OLT C300v2 Series/C300v3 Series

l Command Format
CRT-ONU-MVLAN::(DID=device-id|DNAME=device-name)[,PID=port-id][,
OID=onu-id]:CTAG::[ONUPROFILENAME=onu-profile-name],MVLAN=mvlan;

7-104

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

por

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU Under Certain
MacAddress while DID or DNAME Conditions:Must
SN/LOID/Pass- indicates the OLT choose one
word device. between OID and
(e.g. 1-1-1-2-1 ONUPROFILENAME
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

ONUPRO- String SIZE(1-64) ONU Profile NAME Required

FILENAME Under Certain
Conditions:Must
choose one
between OID and
ONUPROFILENAME
MVLAN Integer 1-4094 MVLAN Required

l Response Format

Refer to Section 4.2.2.2 for detailed TL1 command response format.

l Response Parameters

None.
l Error Code

7-105

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

DDOF, IIPE, EEH

Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CRT-ONU-MVLAN::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::MVLAN=100;
Response:
0 2015-05-20 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create a MVLAN of Rack1/Shelf1/Slot5/Port7/ONU1 on
10.63.204.51.
Command 2:
CRT-ONU-MVLAN::DID=10.63.204.51:CTAG::ONUPROFILENAME=remote-profile,
MVLAN=100;
Response:
0 2017-04-20 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create an MVLAN of ONU profile remote-profile on NE
10.63.204.51.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.15.20T95 2015-10-19 New TL1 Command

7-106

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

NetNumenU31R20V12.17.20T120 2017-4-27 New Command

Parameters ：
ONUPROFILENAME

【Delete ONU MVLAN】

7.1.32 DLT-ONU-MVLAN【 】
l Description
This command is used to delete an ONU MVLAN.
l Applicable NE

NE Category NE Type Notes

PON OLT C300 Series/C300v2 Series/C300v3 Series

MSAN C300Mv4 Series

l Command Format
DLT-ONU-MVLAN::(DID=device-id|DNAME=device-name)[,PID=port-id][,OID=onu-id]:CTAG::
[ONUPROFILENAME=onu-profile-name,]MVLAN=mvlan;
l Operated Target Identifier

Parame- Type Value Range Description Optional Description

ter Name

DID String SIZE(1-100) NE ID Required Under Certain

Conditions:Must choose one
between DID and DNAME

DNAME String SIZE(1-32) NE Name Required Under Certain

Conditions:Must choose one
between DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. Optional

por 1-1-5-2)

7-107

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

OID String rack-shelf-slot- ONU ID. It's used Required Under Certain
port-onu to identify the Conditions:Must choose
MacAddress ONU while DID or one between OID and
SN/LOID/Pass- DNAME indicates ONUPROFILENAME
word the OLT device.
(e.g. 1-1-1-2-1
00-18-FE-7C-
64-E4
ZTEG54998768)

l Command Parameter

Parameter Type Value Description Optional Description

Name Range

ONUPRO- String SIZE(1-64) ONU Profile Required Under Certain

FILENAME Name Conditions:Must choose
one between OID and
ONUPROFILENAME

MVLAN Inte- 1-4094 MVLAN Required

ger

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, IDNE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
DLT-ONU-MVLAN::DID=10.63.204.233,OID=1-1-5-7-1:CTAG:::MVLAN=100;
Response:
0 2016-05-06 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;

7-108

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

Remark:
This command is used to delete a MVLAN of Rack1/Shelf1/Slot5/Port7/ONU1 on
10.63.204.233.
Command 2:
DLT-ONU-MVLAN::DID=10.63.204.233:CTAG:::ONUPROFILENAME=remote-profile,MVLAN=10
Response:
0 2017-04-25 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to delete a MVLAN 100 from ONU profile remote-profile on NE
10.63.204.233.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.16.20T105 2016-5-19 New TL1 Command

NetNumenU31R20V12.17.20T120 2017-4-25 New Command Parameters ：

ONUPROFILENAME

【Create ONU PPPoE】

7.1.33 CRT-ONU-PPPOE【 】
l Description
This command is used to create ONU PPPoE configuration information.
l Applicable NE

NE Category NE Type Notes

PON OLT C300v2 Series/C300v3 Series

l Command Format

7-109

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

CRT-ONU-PPPOE::(DID=device-id|DNAME=device-name)[,PID=port-id],
OID=onu-id:CTAG::IPHOSTID=iphost-id[,NATENABLE=nat-enable][,
PPPOEMODE=pppoe-mode][,CONNECTTYPE=connection-type]
[,RELEASETIME=release-time],USERNAME=user-name,PASSWORD=password;
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

por

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU
MacAddress while DID or DNAME
SN/LOID/Pass- indicates the OLT
word device.
(e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

IPHOSTID Integer 1-255 IP Host ID Required

NATEN- String Enable NAT Enabling Optional

ABLE Disable

PPPOE- String Auto PPPoE Mode Optional

MODE Chap
Pap

CONNECT- String Always Connection Type Optional

TYPE OnDemand
Manual

7-110

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

RELEASE- Integer 1–65535 Release Time Optional

TIME (Seconds)

USER- String SIZE(1-128) PPPoE User Name Required

NAME

PASS- String SIZE(1-25) PPPoE Password Required

WORD

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CRT-ONU-PPPOE::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::IPHOSTID=1,
NATENABLE=Enable,PPPOEMODE=Auto,USERNAME=guest, PASSWORD=pwd;
Response:
0 2015-05-20 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create the ONU PPPoE information of
Rack1/Shelf1/Slot5/Port7/ONU1 on 10.63.204.51.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

7-111

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

NetNumenU31R20V12.15.20T100 2015-10-27 New TL1 Command

【Create ONU Service】

7.1.34 CRT-ONU-SERVICE【 】
l Description
This command is used to create an ONU service.
l Applicable NE

NE Category NE Type Notes

PON OLT C300v2 Series/C300v3 Series

l Command Format
CRT-ONU-SERVICE::(DID=device-id|DNAME=device-name)[,PID=port-id][,
OID=onu-id]:CTAG::[ONUPROFILENAME=onu-profile-name],SERVICENAME=service-name,
ONUGEMPORTID=gemport-id,MAPPINGTYPE=mapping-type[,COS=cos][,VID=vlan-id]
[,ONUPORT=onu-port];
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

port

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU Under Certain
MacAddress while DID or DNAME Conditions:Must
SN/LOID/Pass- indicates the OLT choose one
word device. between OID and
(e.g. 1-1-1-2-1 ONUPROFILENAME
00-18-FE-7C-64-E4
ZTEG54998768)

7-112

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

ONUPRO- String SIZE(1-64) ONU Profile NAME Required

FILENAME Under Certain
Conditions:Must
choose one
between OID and
ONUPROFILENAME

SERVICE- String SIZE(1-64) Service Name Required

NAME

ONUGEM- Integer 1-255 ONU GemPort ID Required

PORTID

MAPPING- String VLAN Mapping Type Required

TYPE CoS
CoSAndVLAN
Transparent
Untag

COS String SIZE(1-32) CoS Priority(0-7). Required Under

CoS1/CoS2/CoS4- Certain Conditions:
CoS6/...（e.g. 1/4/6 Mapping Type is CoS
1/3-5/7) or
CoSAndVLAN

VID String SIZE(1-255) VLAN ID(1-4094). Required Under

VID1/VID2/VID3- Certain Conditions:
VID9/... （ e.g. Mapping Type is VLAN
100/105/106 or
100/102-105/120) CoSAndVLAN

ONUPORT String [rack-][shelf-][slo- Ethernet Port of ONU Optional

t-]port (e.g. 3-2: slot3-port2
If no slot, 2: port2
1-1-3-2: rack1-shelf1-
slot3-port2)

l Response Format

Refer to Section 4.2.2.2 for detailed TL1 command response format.

l Response Parameters

None.
l Error Code

DDOF, IIPE, EEH

7-113

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

Refer to Chapter 5 Unified Error Code Definition for more details.

l Example
Command 1:
CRT-ONU-SERVICE::DID=10.63.204.233,OID=1-1-5-7-1:CTAG::
SERVICENAME=service,ONUGEMPORTID=1,MAPPINGTYPE=VLAN,VID=100;
Response:
0 2015-06-06 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create ONU service of Rack1/ Shelf1/Slot5/Port7/ONU1 on
10.63.204.233.
Command 2:
CRT-ONU-SERVICE::DID=10.63.204.233,OID=1-1-5-7-1:CTAG::
SERVICENAME=service,ONUGEMPORTID=1,MAPPINGTYPE=VLAN,VID=100/102-104/120;
Response:
0 2015-06-06 10:56:23
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create ONU service of Rack1/ Shelf1/Slot5/Port7/ONU1 on
10.63.204.233.
Command 3:
CRT-ONU-SERVICE::DID=10.63.204.233,OID=1-1-5-7-1:CTAG::
SERVICENAME=service,ONUGEMPORTID=1,MAPPINGTYPE=VLAN,VID=100,ONUPORT=1;
Response:
0 2016-11-28 10:56:23
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create ONU service of Rack1/ Shelf1/Slot5/Port7/ONU1 on
10.63.204.233.

7-114

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

Command 4:
CRT-ONU-SERVICE::DID=10.63.204.233:CTAG::ONUPROFILENAME=remote-profile,
SERVICENAME=service,ONUGEMPORTID=1,MAPPINGTYPE=VLAN,VID=100;
Response:
0 2017-04-06 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create a service of ONU profile remote-profile on NE
10.63.204.233.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.15.20T90 2015-6-9 New TL1 Command

NetNumenU31R20V12.17.20T115 2016-11-28 New Command Parameters：

ONUPORT

NetNumenU31R20V12.17.20T120 2017-4-27 New Command Parameters：

ONUPROFILENAME

【Delete ONU Service】

7.1.35 DLT-ONU-SERVICE【 】
l Description
This command is used to delete an ONU service.
l Applicable NE

NE Category NE Type Notes

PON OLT C300 Series/C300v2 Series/C300v3 Series

MSAN C300Mv4 Series

7-115

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

l Command Format
DLT-ONU-SERVICE::(DID=device-id|DNAME=device-name)[,PID=port-id]
[,OID=onu-id]:CTAG::[ONUPROFILENAME=onu-profile-name,]SERVICENAME=service-name;
l Operated Target Identifier

Parameter Type Value Range Description Optional

Name Description

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

por

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU Under Certain
MacAddress while DID or DNAME Conditions:Must
SN/LOID/Pass- indicates the OLT choose one
word device. between OID and
(e.g. 1-1-1-2-1 ONUPROFILENAME
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

ONUPRO- String SIZE(1-64) ONU Profile Required Under Certain

FILENAME Name Conditions:Must choose
one between OID and
ONUPROFILENAME

SERVICE- Octet String SIZE(1-64) Service Name Required

NAME

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters

7-116

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
DLT-ONU-SERVICE::DID=10.63.204.233,OID=1-1-5-7-1:CTAG::SERVICENAME=iptvService;
Response:
0 2016-09-06 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to delete an ONU service of Rack1/ Shelf1/Slot5/Port7/ONU1
on 10.63.204.233.
Command 2:
DLT-ONU-SERVICE::DID=10.63.204.233:CTAG::ONUPROFILENAME=remote-profile,SERVICEN
Response:
0 2017-04-25 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to delete an ONU service from ONU profile remote-profile on
NE 10.63.204.233.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

7-117

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

NetNumenU31R20V12.16.20T110 2016-9-28 New TL1 Command

NetNumenU31R20V12.17.20T120 2017-4-25 New Command Parameters:

ONUPROFILENAME

【Create ONU Static Route】

7.1.36 CRT-ONU-STATICROUTE【 】
l Description
This command is used to create an ONU static route.
l Applicable NE

NE Category NE Type Notes

PON OLT C300v2 Series/C300v3 Series

MSAN C300Mv4 Series

l Command Format
CRT-ONU-STATICROUTE::(DID=device-id|DNAME=device-name)[,PID=port-id]
[,OID=onu-id]:CTAG::[ONUPROFILENAME=onu-profile-name],DESTIPADDRESS=
destination-ip-address,DESTIPMASK=destination-ip-mask,NEXTHOPIPADDRESS=
next-hop-ip-address [,OUTPUTPORT=output-port];
l Operated Target Identifier

Parameter Type Value Range Description Optional

Name Description

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one
between DID and
DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one
between DID and
DNAME

PID String rack-shelf-slot- Port ID (e.g. Optional

por 1-1-5-2)

7-118

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

OID String rack-shelf-slot- ONU ID. It's used Required Under

port-onu to identify the Certain Condi-
MacAddress ONU while DID or tions:Must choose
SN/LOID/Pas- DNAME indicates one between OID
sword the OLT device. and ONUPROFILE-
(e.g. 1-1-1-2-1 NAME
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter

Parameter Type Value Range Description Optional

Name Description

ONUPROFILE- String SIZE(1-64) ONU Profile Name Required Under

NAME Certain Condi-
tions:Must choose
one between OID
and ONUPROFILE-
NAME

DESTIPAD- IpAddress Destination IP Required

DRESS Address

DESTIPMASK IpAddress Destination IP Required

Address Mask

NEXTHOPIPAD IpAddress Next Hop IP Required

DRESS Address

OUTPUTPORT Integer 1–255 Output Port Optional

l Response Format

Refer to Section 4.2.2.2 for detailed TL1 command response format.

l Response Parameters

None.
l Error Code

DDOF, IIPE, EEH

Refer to Chapter 5 Unified Error Code Definition for more details.

l Example

Command 1:

7-119

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

CRT-ONU-STATICROUTE::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::
DESTIPADDRESS=100.200.7.0,DESTIPMASK=255.255.255.0,
NEXTHOPIPADDRESS=192.168.4.1, OUTPUTPORT=10;
Response:
0 2015-05-17 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:

This command is used to create an ONU static route of

Rack1/Shelf1/Slot5/Port7/ONU1 on 10.63.204.51.
Command 2:
CRT-ONU-STATICROUTE::DID=10.63.204.51:CTAG::ONUPROFILENAME=remote-profile,
DESTIPADDRESS=100.200.7.0,DESTIPMASK=255.255.255.0,
NEXTHOPIPADDRESS=192.168.4.1, OUTPUTPORT=10;
Response:
0 2017-05-17 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;

Remark:
This command is used to create a static route of ONU profile remote-profile on NE
10.63.204.51.

l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.15.20T95 2015-10-22 New TL1 Command

7-120

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

NetNumenU31R20V12.17.20T120 2017-5-17 New Command

Parameters ：
ONUPROFILENAME

【Create ONU T-CONT】

7.1.37 CRT-ONU-TCONT【 】
l Description
This command is used to create an ONU T-CONT.
l Applicable NE

NE Category NE Type Notes

PON OLT C300v2 Series/C300v3 Series

l Command Format
CRT-ONU-TCONT::(DID=device-id|DNAME=device-name)[,PID=port-id]
[,OID=onu-id]:CTAG::[ONUPROFILENAME=onu-profile-name],
TCONTID=tcont-id[,TCONTNAME=tcont-name][,
BANDWIDTHPROFILENAME=bandwidth-profile-name] [,ALLOCID=alloc-id];
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

por

7-121

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU Under Certain
MacAddress while DID or DNAME Conditions:Must
SN/LOID/Pass- indicates the OLT choose one
word device. between OID and
(e.g. 1-1-1-2-1 ONUPROFILENAME
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

ONUPRO- String SIZE(1-64) ONU Profile NAME Required

FILENAME Under Certain
Conditions:Must
choose one
between OID and
ONUPROFILENAME

TCONTID Integer 1-255 T-CONT ID Required

TCONT- String SIZE(1-64) T-CONT NAME Optional

NAME

BAND- String SIZE(1-64) T-CONT Bandwidth Optional

WIDTH- Profile Name
PROFILE-
NAME

ALLOCID Integer 256-4095 T-CONT Allocation ID Optional

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CRT-ONU-TCONT::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::TCONTID=1,
BANDWIDTHPROFILENAME=5M;
Response:

7-122

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

0 2015-05-20 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create the ONU T-CONT of Rack1/Shelf1/Slot5/Port7/ONU1
on 10.63.204.51.
Command 2:
CRT-ONU-TCONT::DID=10.63.204.51:CTAG::ONUPROFILENAME=line-profile,TCONTID=1,
BANDWIDTHPROFILENAME=5M;
Response:
0 2017-05-20 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create a T-CONT of ONU profile line-profile on NE
10.63.204.51.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.15.20T90 2015-06-03 New TL1 Command

NetNumenU31R20V12.17.20T120 2017-4-27 New Command

Parameters ：
ONUPROFILENAME

【Delete ONU T-CONT】

7.1.38 DLT-ONU-TCONT【 】
l Description

7-123

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

This command is used to delete an ONU T-CONT.

l Applicable NE

NE Category NE Type Notes

PON OLT C300 Series/C300v2 Series/C300v3 Series

MSAN C300Mv4 Series

l Command Format
DLT-ONU-TCONT::(DID=device-id|DNAME=device-name)[,PID=port-id]
[,OID=onu-id]:CTAG::[ONUPROFILENAME=onu-profile-name,]TCONTID=tcont-id;
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required Under

Certain Conditions:
Must choose one
between DID and
DNAME

DNAME String SIZE(1-32) NE Name Required Under

Certain Conditions:
Must choose one
between DID and
DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

port

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU Under Certain
MacAddress while DID or DNAME Conditions:Must
SN/LOID/Pass- indicates the OLT choose one
word device. between OID and
(e.g. 1-1-1-2-1 ONUPROFILENAME
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

7-124

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

ONUPRO- String SIZE(1-64) ONU Profile Name Required

FILENAME Under Certain
Conditions:Must
choose one
between OID and
ONUPROFILENAME

TCONTID Integer 1-255 T-CONT ID Required

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
DLT-ONU-TCONT::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::TCONTID=1;
Response:
0 2016-10-31 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to delete the ONU T-CONT of
Rack1/Shelf1/Slot5/Port7/ONU1/TCONT1 on 10.63.204.51.
Command 2:
DLT-ONU-TCONT::DID=10.63.204.51:CTAG::ONUPROFILENAME=line-profile,TCONTID=1;
Response:
0 2017-04-25 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to delete a T-CONT from ONU profile line-profile on NE
10.63.204.51.

7-125

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.16.20T110 2016-10-31 New TL1 Command

NetNumenU31R20V12.17.20T120 2017-4-25 New Command Parameters：

ONUPROFILENAME

【Create ONU GEM Port】

7.1.39 CRT-ONU-GEMPORT【 】
l Description
This command is used to create an ONU GEM port.
l Applicable NE

NE Category NE Type Notes

PON OLT C300v2 Series/C300v3 Series

l Command Format
CRT-ONU-GEMPORT::(DID=device-id|DNAME=device-name)[,PID=port-id][,
OID=onu-id]:CTAG::[ONUPROFILENAME=onu-profile-name],ONUGEMPORTID=onu-gemport-id,
TCONTID=tcont-id[,GEMPORTNAME=gemport-name][,ADMINSTAT=administrative-status]
[,GEMPORTID=gemport-id]
[,TCONTQUEUE=tcont-queue][,USTRAFFICPROFILENAME=upstream-traffic-profile-name]
[,DSTRAFFICPROFILENAME=downstream-traffic-profile-name];
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

7-126

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

por

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU Under Certain
MacAddress while DID or DNAME Conditions:Must
SN/LOID/Pass- indicates the OLT choose one
word device. between OID and
(e.g. 1-1-1-2-1 ONUPROFILENAME
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

ONUPRO- String SIZE(1-64) ONU Profile NAME Required

FILENAME Under Certain
Conditions:Must
choose one
between OID and
ONUPROFILENAME

ONUGEM- Integer 1-255 ONU GEM Port ID Required

PORTID

TCONTID Integer 1-255 T-CONT ID Required

GEMPORT- String SIZE(1-64) GEM Port NAME Optional

NAME

ADMIN- String Enable Administrative Status Optional

STAT Disable

GEMPOR- Integer 129-4095 Port-ID of GEM Port Optional

TID

TCON- Integer 0-7 T-CONT Queue Optional

TQUEUE

USTRAF- String SIZE(1-64) Upstream Traffic Profile Optional

FICPRO- Name
FILENAME

7-127

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

DSTRAF- String SIZE(1-64) Downstream Traffic Optional

FICPRO- Profile Name
FILENAME

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CRT-ONU-GEMPORT::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::ONUGEMPORTID=1,
TCONTID=1,USTRAFFICPROFILENAME=5M,DSTRAFFICPROFILENAME=10M;
Response:
0 2015-05-20 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create the ONU GEM port of
Rack1/Shelf1/Slot5/Port7/ONU1 on 10.63.204.51.
Command 2:
CRT-ONU-GEMPORT::DID=10.63.204.51:CTAG::ONUPROFILENAME=line-profile,
ONUGEMPORTID=1,TCONTID=1,USTRAFFICPROFILENAME=5M,
DSTRAFFICPROFILENAME=10M;
Response:
0 2017-04-20 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create a GEM port of ONU profile line-profile on NE
10.63.204.51.
l Average Command Response Time

7-128

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.15.20T90 2015-6-16 New TL1 Command

NetNumenU31R20V12.17.20T120 2017-4-27 New Command

Parameters ：
ONUPROFILENAME

【Delete ONU GEM Port】

7.1.40 DLT-ONU-GEMPORT【 】
l Description
This command is used to delete an ONU GEM port.
l Applicable NE

NE Category NE Type Notes

PON OLT C300 Series/C300v2 Series/C300v3 Series

MSAN C300Mv4 Series

l Command Format
DLT-ONU-GEMPORT::(DID=device-id|DNAME=device-name)[,PID=port-id][,OID=onu-id]
:CTAG::[ONUPROFILENAME=onu-profile-name,]ONUGEMPORTID=onu-gemport-id;
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

7-129

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

port

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU Under Certain
MacAddress while DID or DNAME Conditions:Must
SN/LOID/Pass- indicates the OLT choose one
word device. between OID and
(e.g. 1-1-1-2-1 ONUPROFILENAME
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

ONUPRO- String SIZE(1-64) ONU Profile Required Under Certain

FILENAME Name Conditions:Must choose
one between OID and
ONUPROFILENAME

ONUGEM- Integer 1-255 ONU GEM Port Required

PORTID ID

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
DLT-ONU-GEMPORT::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::ONUGEMPORTID=1;
Response:
0 2015-05-20 10:55:49
M CTAG COMPLD

7-130

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

EN=0 ENDESC=No Error

;
Remark:
This command is used to delete the ONU GEM port of
Rack1/Shelf1/Slot5/Port7/ONU1 on 10.63.204.51.
Command 2:
DLT-ONU-GEMPORT::DID=10.63.204.51:CTAG::ONUPROFILENAME=line-profile,
ONUGEMPORTID=1;
Response:
0 2017-04-25 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to delete a GEM port from ONU profile line-profile on NE
10.63.204.51.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.16.20T110 2016-10-31 New TL1 Command

NetNumenU31R20V12.17.20T120 2017-4-25 New Command Parameters：

ONUPROFILENAME

【Create ONU VPort

7.1.41 CRT-ONU-VPORTGEMPORTMAPPING【
】
and GEM Port Mapping】
l Description
This command is used to create a mapping between ONU VPort and GEM port.

7-131

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

l Applicable NE

NE Category NE Type Notes

PON OLT C300v2 Series/C300v3 Series

l Command Format
CRT-ONU-VPORTGEMPORTMAPPING::(DID=device-id|DNAME=device-name)[,PID=port-id],
OID=onu-id:CTAG::VPORTID=vport-id,ONUGEMPORTID=gemport-id[,COS=cos][,VID=vlan-id];
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

por

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU
MacAddress while DID or DNAME
SN/LOID/Pass- indicates the OLT
word device.
(e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

VPORTID Integer 1-256 VPort ID Required

ONUGEM- Integer 1-255 ONU GEM Port ID Required

PORTID

COS Integer 0-7 CoS Optional

7-132

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

VID Integer 1-4094 VLAN ID Optional

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CRT-ONU-VPORTGEMPORTMAPPING::DID=10.63.204.233,OID=1-1-5-7-1:CTAG::
VPORTID=1,ONUGEMPORTID=2;
Response:
0 2015-06-06 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create a mapping between VPort 1 and GEM port 2 of Rack1/
Shelf1/Slot5/Port7/ONU1 on 10.63.204.233.
Command 2:
CRT-ONU-VPORTGEMPORTMAPPING::DID=10.63.204.233,OID=1-1-5-7-1
:CTAG::VPORTID=1,ONUGEMPORTID=2,COS=7,VID=1066;
Response:
0 2015-06-06 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create a mapping with CoS(7) and VLAN(1066) between
VPort 1 and GEM port 2 of Rack1/ Shelf1/Slot5/Port7/ONU1 on 10.63.204.233.
l Average Command Response Time

Scenario Average Response Time (s)

7-133

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.15.20T90 2015-06-10 New TL1 Command

【Create ONU Port

7.1.42 CRT-ONUPORT-EXTENDEDVLANRULE【
】
Extended VLAN Rule】
l Description
This command is used to create ONU port extended VLAN rule.
l Applicable NE

NE Category NE Type Notes

PON OLT C300v2 Series/C300v3 Series

l Command Format
CRT-ONUPORT-EXTENDEDVLANRULE::(DID=device-id|DNAME=device-name)[,PID=port-id],
OID=onu-id,ONUPORT=onu-port:CTAG::[PORTTYPE=port-type],
FILTERRULENAME=filter-rule-name,TREATMENTRULENAME=treatment-rule-name;
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

por

7-134

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU
MacAddress while DID or DNAME
SN/LOID/Pass- indicates the OLT
word device.
(e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

ONUPORT String [rack-][shelf-][slo- UNI Port of ONU Required

t-]port (e.g. 3-2: slot3-port2
If no slot, 2: port2
1-1-3-2: rack1-shelf1-
slot3-port2)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

PORTTYPE String Ethernet UNI Port Type Optional

WiFi If not input, the default
VEIP UNI type is Ethernet.
IPHost

FILTERRU- String SIZE(1-64) Filter Rule Name Required

LENAME

TREAT- String SIZE(1-64) Treatment Rule Name Required

MENTRU-
LENAME

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.

l Response Parameters

None.
l Error Code

DDOF, IIPE, EEH

Refer to Chapter 5 Unified Error Code Definition for more details.

l Example
Command 1:

7-135

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

CRT-ONUPORT-EXTENDEDVLANRULE::DID=10.63.204.51,OID=1-1-5-7-1,ONUPORT=1:
CTAG::PORTTYPE=Ethernet,FILTERRULENAME=filterRule,TREATMENTRULENAME
=treatmentRule;
Response:
0 2015-05-20 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create an extended VLAN rule of
Rack1/Shelf1/Slot5/Port7/ONU1/Ethernet port1 on 10.63.204.51.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.15.20T95 2015-08-08 New TL1 Command

【 Create ONU Port

7.1.43 CRT-ONUPORT-EXTENDEDVLAN【
】
Extended VLAN】
l Description
This command is used to create ONU port extended VLAN information.
l Applicable NE

NE Category NE Type Notes

PON OLT C300v2 Series/C300v3 Series

l Command Format
CRT-ONUPORT-EXTENDEDVLAN::(DID=device-id|DNAME=device-name)[,PID=port-id],
OID=onu-id,ONUPORT=onu-port:CTAG::[PORTTYPE=port-type],DSMODE=downstream-mode;
l Operated Target Identifier

7-136

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

por

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU
MacAddress while DID or DNAME
SN/LOID/Pass- indicates the OLT
word device.
(e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

ONUPORT String [rack-][shelf-][slo- UNI Port of ONU Required

t-]port (e.g. 3-2: slot3-port2
If no slot, 2: port2
1-1-3-2: rack1-shelf1-
slot3-port2)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

PORTTYPE String Ethernet UNI Port Type Optional

WiFi If not input, the default
VEIP UNI type is Ethernet.
IPHost

DSMODE String InverseUpstream Downstream Mode Required

Transparent

l Response Format

7-137

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

Refer to Section 4.2.2.2 for detailed TL1 command response format.

l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CRT-ONUPORT-EXTENDEDVLAN::DID=10.63.204.51,OID=1-1-5-7-1,ONUPORT=1:CTAG::
PORTTYPE=Ethernet,DSMODE=InverseUpstream;
Response:
0 2015-05-20 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create the extended VLAN information of
Rack1/Shelf1/Slot5/Port7/ONU1/Ethernet port1 on 10.63.204.51.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.15.20T95 2015-08-08 New TL1 Command

【Create ONU Port IGMP】

7.1.44 CRT-ONUPORT-IGMP【 】
l Description
This command is used to create ONU port IGMP information.
l Applicable NE

7-138

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

NE Category NE Type Notes

PON OLT C300 Series/C300v2 Series/C300v3 Series

MSAN C300Mv4 Series

l Command Format
CRT-ONUPORT-IGMP::(DID=device-id|DNAME=device-name)[,PID=port-id],
OID=onu-id,ONUPORT=onu-port:CTAG::[PORTTYPE=port-type],
IGMPPROFILENAME=igmp-profile-name[,MAXGROUPNUM=max-group-number]
[,MAXBANDWIDTH=max-bandwidth][,BANDWIDTHENFORCE=bandwidth-enforce];
l Operated Target Identifier

Parameter Type Value Range Description Optional

Name Description

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

por

OID String rack-shelf-slot- ONU ID. It's used to Required

port-onu identify the ONU while
MacAddress DID or DNAME indicates
SN/LOID/Pass- the OLT device.
word (e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

ONUPORT String [rack-][shelf-][slo- UNI Port of ONU Required

t-]port (e.g. 3-2: slot3-port2
If no slot, 2: port2
1-1-3-2: rack1-shelf1-
slot3-port2)

l Command Parameter

Parameter Type Value Range Description Optional

Name Description

7-139

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

PORTTYPE String Ethernet UNI Port Type Optional

VEIP If not input, the
default UNI type is
Ethernet.

IGMPPRO- String SIZE(1-64) IGMP Profile Name Required

FILENAME

MAX- Integer 0-1000 Maximum Group Number Optional

GROUP- Value 0 indicates no limit
NUM

MAXBAND- Integer 0-2147483648 Maximum Bandwidth Optional

WIDTH (kbps)
Value 0 indicates no limit

BAND- String Enable Bandwidth Enforcing Optional

WIDTHEN- Disable Enabling
FORCE

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IDNE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CRT-ONUPORT-IGMP::DID=10.63.204.51,OID=1-1-5-7-1,ONUPORT=1:CTAG::
IGMPPROFILENAME=igmpProfile,MAXGROUPNUM=100;
Response:
0 2015-08-20 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error

7-140

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

;
Remark:
This command is used to create IGMP information of
Rack1/Shelf1/Slot5/Port7/ONU1/Ethernet port 1 on 10.63.204.51.
Command 2:
CRT-ONUPORT-IGMP::DID=10.63.204.51,OID=1-1-5-7-1,ONUPORT=1:CTAG::
PORTTYPE=VEIP,IGMPPROFILENAME=igmpProfile,MAXGROUPNUM=100;
Response:
0 2016-05-23 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create IGMP information of
Rack1/Shelf1/Slot5/Port7/ONU1/VEIP port 1 on 10.63.204.51.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.16.20T100 2015-12-01 New TL1 Command

NetNumenU31R20V12.16.20T105 2016-05-23 New Command

Parameters：PORTTYPE

【Delete ONU Port IGMP】

7.1.45 DLT-ONUPORT-IGMP【 】
l Description
This command is used to delete an ONU port IGMP.
l Applicable NE

NE Category NE Type Notes

7-141

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

PON OLT C300 Series/C300v2 Series/C300v3 Series

MSAN C300Mv4 Series

l Command Format
DLT-ONUPORT-IGMP::(DID=device-id|DNAME=device-name)[,PID=port-id],
OID=onu-id,ONUPORT=onu-port:CTAG::[PORTTYPE=port-type];
l Operated Target Identifier

Parameter Type Value Range Description Optional

Name Description

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

por

OID String rack-shelf-slot- ONU ID. It's used to Required

port-onu identify the ONU while
MacAddress DID or DNAME indicates
SN/LOID/Pass- the OLT device.
word (e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

ONUPORT String [rack-][shelf-][slo- UNI Port of ONU Required

t-]port (e.g. 3-2: slot3-port2
If no slot, 2: port2
1-1-3-2: rack1-shelf1-
slot3-port2)

l Command Parameter

Parameter Type Value Range Description Optional

Name Description

7-142

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

PORTTYPE String Ethernet UNI Port Type Optional

VEIP If not input, the
default UNI type is
Ethernet.

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IDNE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
DLT-ONUPORT-IGMP::DID=10.63.204.51,OID=1-1-5-7-1,ONUPORT=1:CTAG::;
Response:
0 2015-08-20 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to delete an IGMP of Rack1/Shelf1/Slot5/Port7/ONU1/Ethernet
port 1 on 10.63.204.251.
Command 2:
DLT-ONUPORT-IGMP::DID=10.63.204.51,OID=1-1-5-7-1,ONUPORT=1:CTAG::
PORTTYPE=VEIP;
Response:
0 2016-05-23 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to delete an IGMP of Rack1/Shelf1/Slot5/Port7/ONU1/VEIP
port 1 on 10.63.204.251.

7-143

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.16.20T110 2016-09-29 New TL1 Command

【Create ONU Port

7.1.46 CRT-ONUPORT-VLANTRANSLATION【
】
VLAN Translation】
l Description
This command is used to create ONU port VLAN translation.
l Applicable NE

NE Category NE Type Notes

PON OLT C220v1.2/C300 Series/C300v2 Series/C300v3 Series

MSAN C300Mv4 Series

l Command Format
CRT-ONUPORT-VLANTRANSLATION::(DID=device-id|DNAME=device-name)[,PID=port-id],
OID=onu-id,ONUPORT=onu-port:CTAG::[PORTTYPE=port-type],USERVID=user-vid
[,USERCOS=user-cos]([,CVID=cvid][,SVID=svid])[,CTAGCOS=ctag-cos]
[,STAGCOS=stag-cos];
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

7-144

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot-por Port ID (e.g. 1-1-5-2) Optional

OID String rack-shelf-slot-port- ONU ID. It's used Required

onu to identify the ONU
MacAddress while DID or DNAME
SN/LOID/Password indicates the OLT
device.
(e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

ONUPORT String [rack-][shelf-][slot-]p- UNI Port of ONU Required

ort (e.g. 3-2: slot3-port2
If no slot, 2: port2
1-1-3-2: rack1-shelf1-
slot3-port2)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

PORTTYPE String Ethernet UNI Port Type Optional

MulticastGEMPort If not input, the default
UnicastGEMPort UNI type is Ethernet.
WiFi
VEIP
WAN
USERVID Integer 1-4094 User VLAN ID Required

USERCOS Integer 0-7 User CoS Priority Optional

CVID Integer 1-4094 CVLAN ID Required Under

Certain Conditions:
At least choose one
between CVID and
SVID

SVID Integer 1-4094 SVLAN ID Required Under

Certain Conditions:
At least choose one
between CVID and
SVID

7-145

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

CTAGCOS Integer 0-7 CVLAN CoS Priority Optional

STAGCOS Integer 0-8 SVLAN CoS Priority Optional

Value 8 indicates
copying priority from
inner VLAN priority

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CRT-ONUPORT-VLANTRANSLATION::DID=10.63.204.233,OID=1-1-5-7-1,ONUPORT=1:
CTAG::PORTTYPE=Ethernet,USERVID=115,CVID=100,SVID=200;
Response:
0 2015-12-06 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create VLAN translation of Rack1/
Shelf1/Slot5/Port7/ONU1/Ethernet port 1 on 10.63.204.233.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.16.20T100 2016-01-11 New TL1 Command

7-146

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

【Delete ONU Port

7.1.47 DLT-ONUPORT-VLANTRANSLATION【
】
VLAN Translation】
l Description
This command is used to delete ONU port VLAN translation.
l Applicable NE

NE Category NE Type Notes

PON OLT C220v1.2/C300 Series/C300v2 Series/C300v3 Series

MSAN C300Mv4 Series

l Command Format
DLT-ONUPORT-VLANTRANSLATION::(DID=device-id|DNAME=device-name)[,PID=port-id],

OID=onu-id,ONUPORT=onu-port:CTAG::[PORTTYPE=port-type],USERVID=user-vid
[,USERCOS=user-cos];

l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot-por Port ID (e.g. 1-1-5-2) Optional

OID String rack-shelf-slot-port- ONU ID. It's used Required

onu to identify the ONU
MacAddress while DID or DNAME
SN/LOID/Password indicates the OLT
device.
(e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

7-147

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

ONUPORT String [rack-][shelf-][slot-]p- UNI Port of ONU Required

ort (e.g. 3-2: slot3-port2
If no slot, 2: port2
1-1-3-2: rack1-shelf1-
slot3-port2)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

PORTTYPE String Ethernet UNI Port Type Optional

MulticastGEMPort If not input, the default
UnicastGEMPort UNI type is Ethernet.
WiFi
VEIP
WAN
USERVID Integer 1-4094 User VLAN ID Required

USERCOS Integer 0-7 User CoS Priority Optional

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
DLT-ONUPORT-VLANTRANSLATION::DID=10.63.204.233,OID=1-1-5-7-1,ONUPORT=1:
CTAG::PORTTYPE=Ethernet,USERVID=115;
Response:
0 2015-12-06 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to delete VLAN translation of Rack1/
Shelf1/Slot5/Port7/ONU1/Ethernet port 1 on 10.63.204.233.

7-148

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.16.20T100 2016-01-11 New TL1 Command

【Change ONU Bridge Port】

7.1.48 CHG-ONU-BRGPORT【 】
l Description
This command is used to change ONU bridge port configuration information.
l Applicable NE

NE Category NE Type Notes

PON OLT C220v1.2/C300 Series/C300v2 Series/C300v3 Series

MSAN C300Mv4 Series

l Command Format
CHG-ONU-BRGPORT::(DID=device-id|DNAME=device-name)[,PID=port-id],
OID=onu-id,ONUPORT=onu-port:CTAG::[UPBWPRF=up-bandwidth-profile-name][,
DOWNBWPRF=down-bandwidth-profile-name];
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

7-149

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot-por Port ID (e.g. 1-1-5-2) Optional

OID String rack-shelf-slot-port- ONU ID. It's used Required

onu to identify the ONU
MacAddress while DID or DNAME
SN/LOID/Password indicates the OLT
device.
(e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

ONUPORT String [rack-][shelf-][slot-]p- UNI Port of ONU Required

ort (e.g. 3-2: slot3-port2
If no slot, 2: port2
1-1-3-2: rack1-shelf1-
slot3-port2)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

UPBWPRF String SIZE(1-64) Upstream Bandwidth Optional

Profile Name

DOWNBW- String SIZE(1-64) Downstream Optional

PRF Bandwidth Profile
Name

l Response Format

Refer to Section 4.2.2.2 for detailed TL1 command response format.

l Response Parameters
None.

l Error Code
DDOF, IIPE, EEH

Refer to Chapter 5 Unified Error Code Definition for more details.

7-150

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

l Example
Command 1:
CHG-ONU-BRGPORT::DID=10.63.204.233,OID=1-1-5-7-1,ONUPORT=1:CTAG::
UPBWPRF=5M,DOWNBWPRF=10M;
Response:
0 2015-06-06 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to change rate limiting of Rack1/
Shelf1/Slot5/Port7/ONU1/bridge port 1 on 10.63.204.233.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.16.20T100 2015-12-15 New TL1 Command

【Change ONU Target Status】

7.1.49 CHG-ONU-TARGETSTAT【 】
l Description
This command is used to change GPON ONU target status.
l Applicable NE

NE Category NE Type Notes

PON OLT C220v1.2/C300 Series/C300v2 Series/C300v3 Series

l Command Format
CHG-ONU-TARGETSTAT::(DID=device-id|DNAME=device-name)[,PID=port-id],
OID=onu-id:CTAG::TARGETSTAT=target-status;
l Operated Target Identifier

7-151

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

port

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU
MacAddress while DID or DNAME
SN/LOID/Pass- indicates the OLT
word device.
(e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

TARGET- String Inactive Target Status Required

STAT OMCIReady

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.

l Response Parameters
None.

l Error Code
DDOF, IIPE, EEH

Refer to Chapter 5 Unified Error Code Definition for more details.

l Example

Command 1:

7-152

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

CHG-ONU-TARGETSTAT::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::
TARGETSTAT=OMCIReady;
Response：
0 2014-12-22 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to change ONU target status of
Rack1/Shelf1/Slot5/Port7/ONU1 on 10.63.204.51.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.15.20T85 2014-12-22 New TL1 Command

【 Change ONU Video ANI

7.1.50 CHG-ONU-VIDEOANI【
】
Configuration】
l Description
This command is used to change ONU video ANI configuration.
l Applicable NE

NE Category NE Type Notes

PON OLT C220v1.2/C300 Series/C300v2 Series/C300v3 Series

l Command Format
CHG-ONU-VIDEOANI::(DID=device-id|DNAME=device-name)[,PID=port-id],OID=onu-id
:CTAG::[ADMINSTAT=admin-status][,AGCMODE=agc-mode,AGC=agc];
l Operated Target Identifier

7-153

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

port

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU
MacAddress while DID or DNAME
SN/LOID/Pass- indicates the OLT
word device.
(e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

ADMIN- String Enable Administrative Status Optional

STAT Disable

AGCMODE String None AGC Mode Optional

Broadband
Optical

AGC Integer -128–127 AGC (0.1dB) Required Under

Certain Conditions:
Broadband or Optical
mode.

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.

l Response Parameters
None

7-154

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CHG-ONU-VIDEOANI::DID=10.63.173.78,OID=1-1-2-1-1:CTAG::AGCMODE=Optical,AGC=12;

Response：
0 2015-04-10 10:19:37
M CTAG COMPLD
EN=0 ENDESC=No Error

;
Remark:
This command is used to change video ANI configuration of
Rack1/Shelf1/Slot2/Port1/ONU1 on 10.63.173.78.

Command 2:
CHG-ONU-VIDEOANI::DID=10.63.173.78,OID=1-1-2-1-1:CTAG::ADMINSTAT=Enable;
Response：
0 2016-05-09 10:32:43
M CTAG COMPLD
EN=0 ENDESC=No Error

;
Remark:
This command is used to change video ANI configuration of
Rack1/Shelf1/Slot2/Port1/ONU1 on 10.63.173.78.
Command 3:
CHG-ONU-VIDEOANI::DID=10.63.173.78,OID=1-1-2-1-1:CTAG::ADMINSTAT=Enable,

AGCMODE=Optical,AGC=12;

Response：
0 2016-05-09 11:13:42

M CTAG COMPLD
EN=0 ENDESC=No Error

;
Remark:

7-155

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

This command is used to change video ANI configuration of

Rack1/Shelf1/Slot2/Port1/ONU1 on 10.63.173.78.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.15.20T90 2015-04-10 New TL1 Command

NetNumenU31R20V12.16.20T105 2015-05-09 New Command Parameters ：

ADMINSTAT

【Change ONU VPort】

7.1.51 CHG-ONU-VPORT【 】
l Description
This command is used to change ONU VPort configuration.
l Applicable NE

NE Category NE Type Notes

PON OLT C300v2 Series/C300v3 Series

l Command Format
CHG-ONU-VPORT::(DID=device-id|DNAME=device-name)[,PID=port-id],OID=onuid:
CTAG::VPORTID=vport-id[,MAPPINGTYPE=mapping-type][,VPORTNAME=vport-name];
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

7-156

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

por

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU
MacAddress while DID or DNAME
SN/LOID/Pass- indicates the OLT
word device.
(e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

VPORTID Integer 1-256 VPort ID Required

MAPPING- String VLAN Mapping Type Optional

TYPE CoS
CoSAndVLAN
OneToOne

VPORT- String SIZE(1-128) VPort Name Optional

NAME

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CHG-ONU-VPORT::DID=10.63.204.233,OID=1-1-5-7-1:CTAG::
VPORTID=1,MAPPINGTYPE=VLAN;
Response:

7-157

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

0 2015-06-06 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to configure VLAN mapping type of Rack1/
Shelf1/Slot5/Port7/ONU1/VPort1 on 10.63.204.233.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.15.20T90 2015-06-05 New TL1 Command

【Change ONU GEM Port QoS】

7.1.52 CHG-ONUGEMPORT-QOS【 】
l Description
This command is used to change ONU GEM port QoS information.
l Applicable NE

NE Category NE Type Notes

PON OLT C300v2 Series/C300v3 Series

l Command Format

CHG-ONUGEMPORT-QOS::(DID=device-id|DNAME=device-name)[,PID=port-id],
OID=onu-id:CTAG::ONUGEMPORTID=onu-gemport-id,ONUPORT=onu-port,
DSQUEUE=downstream-queue;

l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

7-158

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

por

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU
MacAddress while DID or DNAME
SN/LOID/Pass- indicates the OLT
word device.
(e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

ONUGEM- Integer 1-255 ONU GEM Port ID Required

PORTID

ONUPORT String [rack-][shelf-][slo- Ethernet Port of ONU Required

t-]port (e.g. 3-2: slot3-port2
If no slot, 2: port2
1-1-3-2: rack1-shelf1-
slot3-port2)

DSQUEUE Integer 0-7 Downstream Queue Required

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.

7-159

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

l Example
Command 1:
CHG-ONUGEMPORT-QOS::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::ONUGEMPORTID=1,
ONUPORT=1,DSQUEUE=2;
Response:
0 2015-05-20 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to change the QoS information of
Rack1/Shelf1/Slot5/Port7/ONU1/GEM port1 on 10.63.204.51.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.15.20T95 2015-08-08 New TL1 Command

【Change ONU Port VLAN】

7.1.53 CHG-ONUPORT-VLAN【 】
l Description
This command is used to change ONU port VLAN.
l Applicable NE

NE Category NE Type Notes

PON OLT C300v2 Series/C300v3 Series

l Command Format
CHG-ONUPORT-VLAN::(DID=device-id|DNAME=device-name)[,PID=port-id][,

7-160

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

OID=onu-id],ONUPORT=onu-port:CTAG::[ONUPROFILENAME=onu-profile-name]
[,PORTTYPE=port-type][,VLANMODE=vlan-mode][,PVID=pvid][,COS=cos];
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required Under Certain

Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required Under Certain

Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

por

OID String rack-shelf-slot- ONU ID. It's used Required Under Certain
port-onu to identify the ONU Conditions:Must
MacAddress while DID or DNAME choose one
SN/LOID/Pass- indicates the OLT between OID and
word device. ONUPROFILENAME
(e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

ONUPORT String [rack-][shelf-][slo- UNI Port of ONU Required

t-]port (e.g. 3-2: slot3-port2
If no slot, 2: port2
1-1-3-2: rack1-shelf1-
slot3-port2)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

ONUPRO- String SIZE(1-64) ONU Profile NAME Required

FILENAME Under Certain
Conditions:Must
choose one
between OID and
ONUPROFILENAME

7-161

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

PORTTYPE String Ethernet UNI Port Type Optional

MulticastGEMPort If not input, the default
UnicastGEMPort UNI type is Ethernet.
WiFi
VEIP
WAN
VLAN- String Tag VLAN Mode Optional
MODE Trunk
Hybrid
Transparent

PVID Integer 1-4094 PVID Optional

COS Integer 0-7 CoS Optional

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CHG-ONUPORT-VLAN::DID=10.63.204.233,OID=1-1-5-7-1,ONUPORT=1:CTAG::
PORTTYPE=Ethernet,VLANMODE=Hybrid,PVID=115,COS=4;
Response:
0 2015-06-06 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to set VLAN mode to hybrid of Rack1/
Shelf1/Slot5/Port7/ONU1/ETHUNI1 on 10.63.204.233,and PVID is set to 115,CoS
is set to 4.
Command 2:
CHG-ONUPORT-VLAN::DID=10.63.204.233,ONUPORT=1:CTAG::ONUPROFILENAME=
remote-profile,PORTTYPE=Ethernet,VLANMODE=Hybrid,PVID=115,COS=4;
Response:

7-162

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

0 2017-04-06 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to modify Ethernet port 1 VLAN information of ONU profile
remote-profile on NE 10.63.204.233.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.15.20T90 2015-06-15 New TL1 Command

NetNumenU31R20V12.17.20T120 2017-4-27 New Command

Parameters ：
ONUPROFILENAME

【Change ONU Video Port】

7.1.54 CHG-ONUVIDEOPORT【 】
l Description
This command is used to change GPON ONU video port information.
l Applicable NE

NE Category NE Type Notes

PON OLT C300v2 Series/C300v3 Series

l Command Format
CHG-ONUVIDEOPORT::(DID=device-id|DNAME=device-name)[,PID=port-id],
OID=onu-id,ONUPORT=onu-port:CTAG::ADMINSTAT=admin-status;
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

7-163

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

por

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU
MacAddress while DID or DNAME
SN/LOID/Pass- indicates the OLT
word device.
(e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

ONUPORT String [rack-][shelf-][slo- Video Port of ONU Required

t-]port (e.g. 3-2: slot3-port2
If no slot, 2: port2
1-1-3-2: rack1-shelf1-
slot3-port2)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

ADMIN- String Enable Administrative Status Required

STAT Disable

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example

7-164

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

Command 1:
CHG-ONUVIDEOPORT::DID=10.63.204.51,OID=1-1-5-7-1,ONUPORT=1:CTAG::
ADMINSTAT=Enable;
Response:
0 2014-11-20 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to enable the administrative status of Rack1/
Shelf1/Slot5/Port7/ONU1/Video Port1 on 10.63.204.51.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.15.20T90 2014-11-28 New TL1 Command

【Change ONU VoIP】

7.1.55 CHG-ONU-VOIP【 】
l Description
This command is used to change the VoIP of ONU.
l Applicable NE

NE Category NE Type Notes

PON OLT C300 Series/C300v2 Series/C300v3 Series

MSAN C300Mv4 Series

l Command Format
CHG-ONU-VOIP::(DID=device-id|DNAME=device-name)[,PID=port-id][,OID=onu-id]:CTAG::
[ONUPROFILENAME=onu-profile-name][,PROTOCOLTYPE=protocol-type]
[,USEDCONFMETHOD=used-conf-method][,H248REGMODE=h248-reg-mode]

7-165

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

[,ONUDOMAIN=onu-domain][,H248EQUIPMENTNAME=h248-equipment-name]
[,MGCREGMODE=mgc-reg-mode][,LINENAMESN=line-name-sn]
[,IPALLOCATINGMODE=ip-allocating-mode][,CONFSVRADDRESS=conf-svr-address]
[,CONFSVRVALIDATIONSCHEME=conf-svr-validation-scheme]
[,CONFSVRUSERNAME=conf-svr-user-name][,CONFSVRPASSWORD=conf-svr-password]
[,CONFSVRREALM=conf-svr-realm];

l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

port

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU Under Certain
MacAddress while DID or DNAME Conditions:Must
SN/LOID/Pass- indicates the OLT choose one
word device. between OID and
(e.g. 1-1-1-2-1 ONUPROFILENAME
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

ONUPROFILE- String SIZE(1-64) ONU Profile Name Required Under Certain

NAME Conditions:Must choose
one between OID and
ONUPROFILENAME

7-166

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

PROTO- String None Protocol Type Optional

COLTYPE SIP
H.248
MGCP
Non-OMCI

USEDCONFM- String Default Used Configuration Optional

ETHOD OMCI Method
ConfFile
TR069
IETF

H248REG- String IPv4 H.248 Registration Optional

MODE Domain Mode Valid when
EquipName PROTOCOLTYPE is
H.248

ONUDOMAIN String SIZE(1-128) ONU Domain Optional

Valid when
PROTOCOLTYPE is
H.248
Required when
H248REGMODE is IPv4
or Domain

H248EQUIP- String SIZE(1-25) H.248 Equipment Optional

MENTNAME Name Valid when
PROTOCOLTYPE is
H.248
Required when
H248REGMODE is IPv4
or EquipName

MGCREG- String Wildcard MGC Registration Optional

MODE Individual Mode Valid when
PROTOCOLTYPE is
MGCP

LINENAMESN String SIZE(1-25) Line Name Serial Optional

Number Valid when
PROTOCOLTYPE is
MGCP

IPALLOCAT- String Single IP Allocating Mode Optional

INGMODE Dual
Multiple

CONFSVRAD- String SIZE(1-128) Configuration Server Optional

DRESS Address

7-167

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

CONFSVR- String Disable Configuration Server Optional

VALIDATION- MD5 Validation Scheme
SCHEME Basic

CON- String SIZE(1-50) Configuration Server Optional

FSVRUSER- User Name Required when CON-
NAME FSVRVALIDATION-
SCHEME is MD5 or
Basic

CONFSVR- String SIZE(1-32) Configuration Server Optional

PASSWORD Password Required when CON-
FSVRVALIDATION-
SCHEME is MD5 or
Basic

CONFSVR- String SIZE(1-32) Configuration Server Optional

REALM Realm Required when CON-
FSVRVALIDATION-
SCHEME is MD5

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CHG-ONU-VOIP::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::PROTOCOLTYPE=SIP;
Response：
0 2016-02-25 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to change the VoIP protocol type of
Rack1/Shelf1/Slot5/Port7/ONU1 on NE 10.63.204.51.
：
Command 2：
CHG-ONU-VOIP::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::PROTOCOLTYPE=SIP,

7-168

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

USEDCONFMETHOD=OMCI,IPALLOCATINGMODE=Single,CONFSVRADDRESS=10.63.204.5
CONFSVRVALIDATIONSCHEME=MD5,CONFSVRUSERNAME=zte,CONFSVRPASSWORD=zt
CONFSVRREALM=@zte;
Response：
0 2017-04-26 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:：
This command is used to change the SIP VoIP information of
Rack1/Shelf1/Slot5/Port7/ONU1 on NE 10.63.204.51.
：
Command 3：
CHG-ONU-VOIP::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::PROTOCOLTYPE=H.248,
H248REGMODE=IPv4,ONUDOMAIN=ztedomain,H248EQUIPMENTNAME=zteequip,
CONFSVRADDRESS=10.63.204.5,CONFSVRVALIDATIONSCHEME=Disable;
Response：
0 2017-04-26 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to change the H.248 VoIP information of
Rack1/Shelf1/Slot5/Port7/ONU1 on NE 10.63.204.51.
：
Command 4：
CHG-ONU-VOIP::DID=10.63.204.51:CTAG::ONUPROFILENAME=remote-profile,
PROTOCOLTYPE=MGCP,MGCREGMODE=Wildcard,LINENAMESN=ztezte,
CONFSVRADDRESS=10.63.204.5,CONFSVRVALIDATIONSCHEME=Basic,
CONFSVRUSERNAME=zte,CONFSVRPASSWORD=zte;
Response：
0 2017-04-26 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:

7-169

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

This command is used to change the MGCP VoIP information from ONU profile
remote-profile on NE 10.63.204.51.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.16.20T100 2016-3-4 New TL1 Command

NetNumenU31R20V12.17.20T120 2017-4-28 New Command Parameters：

ONUPROFILENMAE,
USEDCONFMETHOD,
H248REGMODE, ONUDOMAIN,
H248EQUIPMENTNAME,
MGCREGMODE, LINENAMESN,
IPALLOCATINGMODE,
CONFSVRADDRESS,
CONFSVRVALIDATIONSCHEME,
CONFSVRUSERNAME,
CONFSVRPASSWORD,
CONFSVRREALM

【Clear ONU Configuration Data】

7.1.56 CLR-ONU-CONFDATA【 】
l Description
This command is used to clear the configuration data of an ONU.
l Applicable NE

NE Category NE Type Notes

PON OLT C300v2 Series/C300v3 Series

l Command Format
CLR-ONU-CONFDATA::(DID=device-id|DNAME=device-name)[,PID=port-id][,OID=onu-id]
:CTAG::;
l Operated Target Identifier

7-170

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

por

OID String rack-shelf-slot- ONU ID. It's used Optional

port-onu to identify the ONU
MacAddress while DID or DNAME
SN/LOID/Pass- indicates the OLT
word device.
(e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter
None.
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CLR-ONU-CONFDATA::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::;
Response:
0 2015-08-20 10:55:49
M CTAG COMPLD

7-171

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

EN=0 ENDESC=No Error

;
Remark:
This command is used to clear the configuration data of
Rack1/Shelf1/Slot5/Port7/ONU1 on 10.63.204.51.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.15.20T95 2015-09-18 New TL1 Command

【Bind DHCP Server

7.1.57 BND-ONU-DHCPSERVERPROFILE【
】
Profile to ONU】
l Description
This command is used to bind DHCP server profile to ONU.
l Applicable NE

NE Category NE Type Notes

PON OLT C300v2 Series/C300v3 Series

l Command Format

BND-ONU-DHCPSERVERPROFILE::(DID=device-ID|DNAME=device-name)[,PID=port-id],
OID=onu-id:CTAG::DHCPSERVERPROFILENAME=dhcpserver-profile-name;
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

7-172

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

port

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU
MacAddress while DID or DNAME
SN/LOID/Pass- indicates the OLT
word device.
(e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

DHCPSER- String SIZE(1-32) DHCP Server Profile Required

VERPRO- Name
FILENAME

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters

None.
l Error Code

DDOF, IIPE, EEH

Refer to Chapter 5 Unified Error Code Definition for more details.

l Example

Command 1:
BND-ONU-DHCPSERVERPROFILE::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::
DHCPSERVERPROFILENAME=testDhcpServerProfile;

7-173

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

Response：
0 2015-05-13 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to bind DHCP server profile testDhcpServerProfile to
Rack1/Shelf1/Slot5/Port7/ONU1 on 10.63.204.51.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.15.20T90 2015-05-13 New TL1 Command

【Unbind DHCP Server

7.1.58 UBND-ONU-DHCPSERVERPROFILE【
】
Profile from ONU】
l Description
This command is used to unbind DHCP server profile from ONU.
l Applicable NE

NE Category NE Type Notes

PON OLT C300v2 Series/C300v3 Series

l Command Format
UBND-ONU-DHCPSERVERPROFILE::(DID=device-ID|DNAME=device-name)[,PID=port-id],
OID=onu-id:CTAG::;
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

7-174

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

por

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU
MacAddress while DID or DNAME
SN/LOID/Pass- indicates the OLT
word device.
(e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter
None.
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
UBND-ONU-DHCPSERVERPROFILE::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::;
Response：
0 2013-08-20 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;

7-175

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

Remark:
This command is used to unbind DHCP server profile form
Rack1/Shelf1/Slot5/Port7/ONU1 on 10.63.204.51.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.15.20T90 2015-05-13 New TL1 Command

【Bind Alarm Profile】

7.1.59 BND-ALARMPROFILE【 】
l Description
This command is used to bind alarm profile.
l Applicable NE

NE NE Type Notes
Category

PON OLT C220v1.2/C300 Series/C300v2 Series/C300v3 Series

l Command Format
BND-ALARMPROFILE::(DID=device-id|DNAME=device-name)[,BID=board-id|[,P-
ID=port-id][,OID=onu-id[,ONUPORT=onu-port]]]:CTAG::ALARMPROFILENAME=al-
arm-profile-name;
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required Under

Certain Conditions:
Must choose one
between DID and
DNAME

7-176

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

DNAME String SIZE(1-32) NE Name Required Under

Certain Conditions:
Must choose one
between DID and
DNAME

BID String rack-shelf-slot Board ID (e.g. 1-1-5) Optional

Can't be input with PID
and OID at the same
time.

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

port Can't be input with BID
at the same time.

OID String rack-shelf-slot- ONU ID. It's used Optional

port-onu to identify the ONU Can't be input with BID
MacAddress while DID or DNAME at the same time.
SN/LOID/Pass- indicates the OLT
word device.
(e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

ONUPORT String [rack-][shelf-][slo- UNI Port of ONU Optional

t-]port (e.g. 3-2: slot3-port2 Valid if OID is input.
If no slot, 2: port2
1-1-3-2: rack1-shelf1-
slot3-port2)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

ALARMPRO- String SIZE(1-32) Alarm Profile Name Required

FILENAME

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Defination for more details.
l Example

7-177

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

Command 1:
BND-ALARMPROFILE::DID=10.63.194.46:CTAG::ALARMPROFILENAME=alarm-
profile-Ne;
Response：
xuzhilu-PC 2014-10-22 10:44:33
M CTFG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to bind alarm profile alarm-profile-Ne to OLT 10.63.194.46.
Command 2:
BND-ALARMPROFILE::DID=10.63.194.46,BID=1-1-5:CTAG::ALARMPROFILE-
NAME=alarm-profile-Board;
Response：
xuzhilu-PC 2014-10-22 10:46:22
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to bind alarm profile alarm-profile-Board to Rack1/Shelf1/Slot5
on OLT 10.63.194.46.
Command 3:
BND-ALARMPROFILE::DID=10.63.194.46,PID=1-1-5-2:CTAG::ALARMPROFILE=a-
larm-profile-Port;
Response：
xuzhilu-PC 2014-10-22 10:51:45
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to bind alarm profile alarm-profile-Port to
Rack1/Shelf1/Slot5/Port2 on OLT 10.63.194.46.
：
Command 4：
BND-ALARMPROFILE::DID=10.63.194.46,OID=1-1-5-2-10:CTAG::ALARMPROFILE-

7-178

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

NAME=alarm-profile-ONU;
Response：
xuzhilu-PC 2014-10-22 10:51:45
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to bind alarm profile alarm-profile-ONU to
Rack1/Shelf1/Slot5/Port2/ONU10 on OLT 10.63.194.46.
：
Command 5：
BND-ALARMPROFILE::DID=10.63.194.46,PID=1-1-5-2,OID=ZTEG0A2B3366:CT-
AG::ALARMPROFILENAME=alarm-profile-ONU;
Response：
xuzhilu-PC 2014-10-22 10:58:05
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to bind alarm profile alarm-profile-ONU to ONU of
Rack1/Shelf1/Slot5/Port2 on OLT 10.63.194.46.
：
Command 6：
BND-ALARMPROFILE::DID=10.63.194.46,OID=1-1-5-2-10,ONUPORT=2:CT-
AG::ALARMPROFILENAME=alarm-profile-ONUPORT;
Response：
xuzhilu-PC 2014-10-22 11:02:16
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to bind alarm profile alarm-profile-ONUPORT to
Rack1/Shelf1/Slot5/Port2/ONU10/ONUPORT2 on OLT 10.63.194.46.
l Average Command Response Time

Scenario Average Response Time (s)

7-179

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.14.20T80 2014-10-22 New TL1 Command

【Unbind Alarm Profile】

7.1.60 UBND-ALARMPROFILE【 】
l Description
This command is used to unbind alarm profile.
l Applicable NE

NE NE Type Notes
Category

PON OLT C220v1.2/C300 Series/C300v2 Series/C300v3 Series

l Command Format
UBND-ALARMPROFILE::(DID=device-id|DNAME=device-name)[,BID=board-id|[,P-
ID=port-id][,OID=onu-id[,ONUPORT=onu-port]]]:CTAG::;
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required Under

Certain Conditions:
Must choose one
between DID and
DNAME

DNAME String SIZE(1-32) NE Name Required Under

Certain Conditions:
Must choose one
between DID and
DNAME

BID String rack-shelf-slot Board ID (e.g. 1-1-5) Optional

Can't be input with PID
and OID at the same
time.

7-180

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

port Can't be input with BID
at the same time.

OID String rack-shelf-slot- ONU ID. It's used Optional

port-onu to identify the ONU Can't be input with BID
MacAddress while DID or DNAME at the same time.
SN/LOID/Pass- indicates the OLT
word device.
(e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

ONUPORT String [rack-][shelf-][slo- UNI Port of ONU Optional

t-]port (e.g. 3-2: slot3-port2 Valid if OID is input.
If no slot, 2: port2
1-1-3-2: rack1-shelf1-
slot3-port2)

l Command Parameter
None
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Defination for more details.
l Example
Command 1:
UBND-ALARMPROFILE::DID=10.63.194.46:CTAG::;
Response：
xuzhilu-PC 2014-10-22 11:04:11
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to unbind alarm profile from OLT 10.63.194.46.
Command 2:

7-181

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

UBND-ALARMPROFILE::DID=10.63.194.46,BID=1-1-5:CTAG::;
Response：
xuzhilu-PC 2014-10-22 11:12:32
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to unbind alarm profile from Rack1/Shelf1/Slot5 on OLT
10.63.194.46.
Command 3:
UBND-ALARMPROFILE::DID=10.63.194.46,PID=1-1-5-2:CTAG::;
Response：
xuzhilu-PC 2014-10-22 11:15:15
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to unbind alarm profile from Rack1/Shelf1/Slot5/Port2 on OLT
10.63.194.46.
：
Command 4：
UBND-ALARMPROFILE::DID=10.63.194.46,OID=1-1-5-2-10:CTAG::;
Response：
xuzhilu-PC 2014-10-22 11:20:51
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to unbind alarm profile from Rack1/Shelf1/Slot5/Port2/ONU10
on OLT 10.63.194.46.
：
Command 5：
UBND-ALARMPROFILE::DID=10.63.194.46,PID=1-1-5-2,OID=ZTEG0A2B3366:CTAG::;
Response：
xuzhilu-PC 2014-10-22 11:22:17
M CTAG COMPLD

7-182

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

EN=0 ENDESC=No Error

;
Remark:
This command is used to unbind alarm profile from ONU of Rack1/Shelf1/Slot5/Port2
on OLT 10.63.194.46.
：
Command 6：
UBND-ALARMPROFILE::DID=10.63.194.46,OID=1-1-5-2-10,ONUPORT=2:CTAG::;
Response：
xuzhilu-PC 2014-10-22 11:23:36
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to unbind alarm profile from
Rack1/Shelf1/Slot5/Port2/ONU10/ONUPORT2 on OLT 10.63.194.46.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.14.20T80 2014-10-22 New TL1 Command

【Unbind VLAN from ONU Port】

7.1.61 UBND-ONUPORT-VLAN【 】
l Description
This command is used to unbind VLAN from ONU port.
l Applicable NE

NE Category NE Type Notes

PON OLT C220v1.2/C300 Series/C300v2 Series/C300v3 Series

7-183

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

MSAN C300Mv4 Series

l Command Format
UBND-ONUPORT-VLAN::(DID=device-id|DNAME=device-name)[,PID=port-id],
OID=onu-id,ONUPORT=onu-port:CTAG::[PORTTYPE=port-type],VID=vid;
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot-port Port ID (e.g. 1-1-5-2) Optional

OID String rack-shelf-slot-port- ONU ID. It's used Required

onu to identify the ONU
MacAddress while DID or DNAME
SN/LOID/Password indicates the OLT
device.
(e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

ONUPORT String [rack-][shelf-][slot-]p- UNI Port of ONU Required

ort (e.g. 3-2: slot3-port2
If no slot, 2: port2
1-1-3-2: rack1-shelf1-
slot3-port2)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

7-184

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

PORTTYPE String Ethernet UNI Port Type Optional

MulticastGEMPort If not input, the default
UnicastGEMPort UNI type is Ethernet.
WiFi
VEIP
WAN
VID Integer 1-4094 VLAN ID Required

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
UBND-ONUPORT-VLAN::DID=10.63.204.233,OID=1-1-5-7-1,ONUPORT=1:CTAG::
PORTTYPE=Ethernet,VID=115;
Response:
0 2015-06-06 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to unbind VLAN 115 from Rack1/
Shelf1/Slot5/Port7/ONU1/Ethernet port 1 on 10.63.204.233.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

7-185

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

Revision Date Notes

NetNumenU31R20V12.16.20T100 2016-01-11 New TL1 Command

【Bind ONU Port to VLAN】

7.1.62 BND-ONUPORT-VLAN【 】
l Description
This command is used to bind ONU port to VLAN.
l Applicable NE

NE Category NE Type Notes

PON OLT C220v1.2/C300 Series/C300v2 Series/C300v3 Series

MSAN C300Mv4 Series

l Command Format
BND-ONUPORT-VLAN::(DID=device-id|DNAME=device-name)[,PID=port-id],
OID=onu-id,ONUPORT=onu-port:CTAG::[PORTTYPE=port-type],VID=vid;
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot-por Port ID (e.g. 1-1-5-2) Optional

OID String rack-shelf-slot-port- ONU ID. It's used Required

onu to identify the ONU
MacAddress while DID or DNAME
SN/LOID/Password indicates the OLT
device.
(e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

7-186

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

ONUPORT String [rack-][shelf-][slot-]p- UNI Port of ONU Required

ort (e.g. 3-2: slot3-port2
If no slot, 2: port2
1-1-3-2: rack1-shelf1-
slot3-port2)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

PORTTYPE String Ethernet UNI Port Type Optional

MulticastGEMPort If not input, the default
UnicastGEMPort UNI type is Ethernet.
WiFi
VEIP
WAN
VID Integer 1-4094 VLAN ID Required

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
BND-ONUPORT-VLAN::DID=10.63.204.233,OID=1-1-5-7-1,ONUPORT=1:CTAG::
PORTTYPE=Ethernet,VID=115;
Response:
0 2015-06-06 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to bind VLAN 115 to Rack1/ Shelf1/Slot5/Port7/ONU1/Ethernet
port 1 on 10.63.204.233.
l Average Command Response Time

7-187

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.16.20T100 2015-12-15 New TL1 Command

【Change Rogue ONU

7.1.63 CHG-BOARD-ROGUEONUDETECT【
】
Detecting Configuration】
l Description
This command is used to change the rogue ONU detecting configuration.
l Applicable NE

NE Category NE Type Notes

PON OLT C220v1.2/C300 Series/C300v2 Series/C300v3 Series

MSAN C300Mv4 Series

l Command Format
CHG-BOARD-ROGUEONUDETECT::(DID=device-id|DNAME=device-name),
BID=board-id:CTAG::DETECTSTAT=detect-status[,LOCATINGSTAT=locating-status]
[,AUTOSHUTDOWNSTAT=auto-shutdown-status];

l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

7-188

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

BID String rack-shelf-slot Board ID (e.g. 1-1-5) Required

l Command Parameter

Parameter Name Type Value Description Optional Description

Range

DETECTSTAT String Enable Detect Status Required

Disable

LOCATINGSTAT String Enable Locating Status Optional

Disable

AUTOSHUT- String Enable Auto-shutdown Status Optional

DOWNSTAT Disable

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CHG-BOARD-ROGUEONUDETECT::DID=10.63.204.233,
BID=1-1-5:CTAG::DETECTSTAT=Enable,LOCATINGSTAT=Enable,
AUTOSHUTDOWNSTAT=Enable;
Response:
0 2015-12-06 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to configure the regue ONU detecting of Rack1/ Shelf1/Slot5
on 10.63.204.233.

7-189

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.16.20T100 2015-12-31 New TL1 Command

【Change ONU ACS】

7.1.64 CHG-ONU-ACS【 】
l Description
This command is used to change the ACS configuration of ONU.
l Applicable NE

NE Category NE Type Notes

PON OLT C300 Series/C300v2 Series/C300v3 Series

MSAN C300Mv4 Series

l Command Format
CHG-ONU-ACS::(DID=device-id|DNAME=device-name)[,PID=port-id]
[,OID=onu-id]:CTAG::[ONUPROFILENAME=onu-profile-name],
ADMINSTAT=administrative-status,VALIDATIONSCHEME=validation-scheme,
TAGTYPE=tag-type[,URI=uri][,USERNAME=user-name][,PWD=password]
[,REALM=realm]
[VID=vlan-id][,PRIORITY=priority];

l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

7-190

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

port

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU Under Certain
MacAddress while DID or DNAME Conditions:Must
SN/LOID/Pass- indicates the OLT choose one
word device. between OID and
(e.g. 1-1-1-2-1 ONUPROFILENAME
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

ONUPRO- String SIZE(1-64) ONU Profile NAME Required

FILENAME Under Certain
Conditions:Must
choose one
between OID and
ONUPROFILENAME

ADMIN- String Enable Administrative Status Required

STAT Disable

VALIDA- String Disable Validation Scheme Required

TION- MD5
SCHEME Basic

TAGTYPE String Untagged Tag Type Required

Tagged

URI String SIZE(1-128) URI Optional

USER- String SIZE(1-25) User Name Required Under Cer-

NAME tain Conditions:VAL-
IDATIONSCHEME is
MD5 or Basic

7-191

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

PWD String SIZE(1-25) Password Required Under Cer-

tain Conditions:VAL-
IDATIONSCHEME is
MD5 or Basic

REALM String SIZE(1-25) Realm Required Under Cer-

tain Conditions:VAL-
IDATIONSCHEME is
MD5

VID Integer 1-4094 VLAN ID Required

Under Certain
Conditions:TAGTYPE
is Tagged

PRIORITY Integer 0-7 priority Required

Under Certain
Conditions:TAGTYPE
is Tagged

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IDNE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CHG-ONU-ACS::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::ADMINSTAT=Enable,
VALIDATIONSCHEME=Disable,TAGTYPE=Tagged,URI=10.2.3.6,VID=100,
PRIORITY=7;
Response：
0 2016-04-25 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to change the ACS configuration of
Rack1/Shelf1/Slot5/Port7/ONU1 on 10.63.204.51(administrative status is enable,
tag type is Tagged, URI is 10.2.3.6,

7-192

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

validation scheme is disable, VLAN ID is 100, priority is 7).

Command 2:
CHG-ONU-ACS::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::ADMINSTAT=Enable,
VALIDATIONSCHEME=MD5,TAGTYPE=Untagged,URI=zte.com.cn,USERNAME=admin,
PWD=admin,REALM=realmtest;
Response：
0 2016-04-25 12:23:12
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to change the ACS configuration of
Rack1/Shelf1/Slot5/Port7/ONU1 on 10.63.204.51(administrative status is enable,
tag type is Untagged, URI is zte.com.cn,
validation scheme is MD5, user name is admin, password is admin, realm is
realmtest).
Command 3:
CHG-ONU-ACS::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::ADMINSTAT=Enable,
VALIDATIONSCHEME=Basic,TAGTYPE=Untagged,URI=zte.com.cn,USERNAME=admin,
PWD=admin;
Response：
0 2016-04-25 12:45:24
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to change the ACS configuration of
Rack1/Shelf1/Slot5/Port7/ONU1 on 10.63.204.51(administrative status is enable,
tag type is Untagged, URI is zte.com.cn,
validation scheme is Basic, user name is admin, password is admin).
Command 4:
CHG-ONU-ACS::DID=10.63.204.51:CTAG::ONUPROFILENAME=remote-profile,
ADMINSTAT=Enable,VALIDATIONSCHEME=Disable,TAGTYPE=Tagged,URI=10.2.3.6,
VID=100,PRIORITY=7;
Response：

7-193

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

0 2017-07-17 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to change ONU ACS of ONU profile remote-profile on NE
10.63.204.51.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.16.20T105 2016-04-25 New TL1 Command

NetNumenU31R20V12.17.20T120 2017-5-17 New Command

Parameters ：
ONUPROFILENAME

【Change ONU Ethernet Port】

7.1.65 CHG-ONU-ETHPORT【 】
l Description
This command is used to change ONU ethernet port configuration.
l Applicable NE

NE Category NE Type Notes

PON OLT C300 Series/C300v2 Series/C300v3 Series

MSAN C300Mv4 Series

l Command Format
CHG-ONU-ETHPORT::(DID=device-id|DNAME=device-name)[,PID=port-id],OID=onu-id,
ONUPORT=onu-port:CTAG::[ADMINSTAT=admin-status][,DUPLEXSPEED=duplex-speed];
l Operated Target Identifier

7-194

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot-port Port ID (e.g. 1-1-5-2) Optional

OID String rack-shelf-slot-port- ONU ID. It's used Optional

onu to identify the ONU
MacAddress while DID or DNAME
SN/LOID/Password indicates the OLT
device.
(e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

ONUPORT String [rack-][shelf-][slot-]p- UNI Port of ONU Required

ort (e.g. 3-2: slot3-port2
If no slot, 2: port2
1-1-3-2: rack1-shelf1-
slot3-port2)

l Command Parameter

Parameter Name Type Value Range Description Optional

Description

ADMINSTAT String Enable Administrative Status Optional

Disable

7-195

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

DUPLEXSPEED String Auto Duplex and Speed Optional

Half10M
Full10M
Half100M
Full100M
Full1000M
Full10000M

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, IDNE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CHG-ONU-ETHPORT::DID=10.63.204.233,OID=1-1-6-1-1,ONUPORT=1:CTAG::
DUPLEXSPEED=Full1000M;
Response:
0 2016-09-26 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to change ethernet port duplex and speed of
Rack1/Shelf1/Slot6/Port1/ONU1/UNI1 on 10.63.204.233.
Command 2:
CHG-ONU-ETHPORT::DID=10.63.204.233,OID=1-1-6-1-1,ONUPORT=1:CTAG::
ADMINSTAT=Enable,DUPLEXSPEED=Full1000M;
Response:
0 2016-09-26 10:55:49
M CTAG COMPLD

7-196

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

EN=0 ENDESC=No Error

;
Remark:
This command is used to change ethernet port configuration of
Rack1/Shelf1/Slot6/Port1/ONU1/UNI1 on 10.63.204.233.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.16.20T110 2016-09-26 New TL1 Command

【 Change ONU IPv4 IP Host

7.1.66 CHG-ONU-IPV4IPHOST【
】
Configuration】
l Description
This command is used to change ONU IPv4 IP host configuration.
l Applicable NE

NE Category NE Type Notes

PON OLT C300 Series/C300v2 Series/C300v3 Series

MSAN C300Mv4 Series

l Command Format
CHG-ONU-IPV4IPHOST::(DID=device-id|DNAME=device-name)[,PID=port-id],OID=onu-
id:CTAG::IPHOSTID=iphost-id[,IPOPTIONS=ip-options][,ONUIDENTIFIER=onu-identifier]
[,IP=ip][,IPMASK=ip-mask][,GATEWAY=gateway][,PRIMARYDNS=primary-dns]
[,SECONDARYDNS=secondary-dns];
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

7-197

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

port

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU
MacAddress while DID or DNAME
SN/LOID/Pass- indicates the OLT
word device.
(e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

IPHOSTID Integer 1–2 IP Host ID Required

IPOP- String EnableDHCP IP Options Optional

TIONS RespondPing (e.g. EnableDHCP
RespondTraceR- EnableDHCP/Re-
oute spondPing
EnableIpStack /RespondTraceRoute)

ONUIDEN- String SIZE(1-25) ONU Identifier Optional

TIFIER

IP String IpAddress IP Address Optional

IPMASK String IpAddress IP Mask Optional

GATEWAY String IpAddress Gateway Optional

PRIMA- String IpAddress Primary DNS Optional

RYDNS

SECONDA- String IpAddress Secondary DNS Optional

RYDNS

7-198

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None
l Error Code
DDOF, IIPE, EEH

Refer to Chapter 5 Unified Error Code Definition for more details.

l Example
Command 1:
CHG-ONU-IPV4IPHOST::DID=10.63.173.78,OID=1-1-2-1-

1:CTAG::IPHOSTID=1,IPOPTIONS=EnableDHCP/RespondPing/RespondTraceRoute,
ONUIDENTIFIER=test,IP=10.1.2.3,IPMASK=255.255.255.0,GATEWAY=10.1.2.1,
PRIMARYDNS=10.1.3.1,SECONDARYDNS=10.1.3.2;
Response：
0 2016-05-10 15:29:24
M CTAG COMPLD
EN=0 ENDESC=No Error

;
Remark:
This command is used to change IP host configuration of
Rack1/Shelf1/Slot2/Port1/ONU1 on 10.63.173.78.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.16.20T105 2016-05-10 New TL1 Command

7-199

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

【Change ONU VEIP】

7.1.67 CHG-ONU-VEIP【 】
l Description
This command is used to change ONU VEIP configuration.
l Applicable NE

NE Category NE Type Notes

PON OLT C300 Series/C300v2 Series/C300v3 Series

MSAN C300Mv4 Series

l Command Format
CHG-ONU-VEIP::(DID=device-id|DNAME=device-name)[,PID=portid],OID=onu-id,
ONUPORT=onu-port:CTAG::[ADMINSTAT=admin-status]
[,INTERDOMAINNAME=interdomain-name][,PORTASSIGNENABLE=port-assign-enable]

[,PROTOCOLTYPE=protocol-type][,ASSIGNEDPORT=assigned-port][,IPHOSTID=iphost-id];
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot-port Port ID (e.g. 1-1-5-2) Optional

OID String rack-shelf-slot-port- ONU ID. It's used Required

onu to identify the ONU
MacAddress while DID or DNAME
SN/LOID/Password indicates the OLT
device.
(e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

7-200

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

ONUPORT String [rack-][shelf-][slot-]p- UNI Port of ONU Required

ort (e.g. 3-2: slot3-port2
If no slot, 2: port2
1-1-3-2: rack1-shelf1-
slot3-port2)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

ADMIN- String Enable Administrative Status Optional

STAT Disable

INTERDO- String SIZE(1-25) Interdomain Name Optional

MAINNAME

PORTAS- String Enable Port Assign Enable Optional

SIGNEN- Disable
ABLE

PROTO- String TCP Protocol Type Required Under Cer-

COLTYPE UDP tain Conditions: when
PORTASSIGNEN-
ABLE is Enable

AS- Integer 0-65535 Assigned Port Required Under Cer-

SIGNED- tain Conditions: when
PORT PORTASSIGNEN-
ABLE is Enable

IPHOSTID Integer 1-255 IP Host ID Required Under Cer-

tain Conditions:when
PORTASSIGNEN-
ABLE is Enable

7-201

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, IDNE, EEH

Refer to Chapter 5 Unified Error Code Definition for more details.

l Example
Command 1:
CHG-ONU-VEIP::DID=10.63.204.233,OID=1-1-5-7-1,ONUPORT=1:CTAG::

ADMINSTAT=Enable,INTERDOMAINNAME=domain,
PORTASSIGNENABLE=Enable,PROTOCOLTYPE=UDP,
ASSIGNEDPORT=1000,IPHOSTID=1;
Response:
0 2015-12-06 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error

;
Remark:
This command is used to change VEIP configuration of
Rack1/Shelf1/Slot5/Port7/ONU1/VEIP1 on 10.63.204.233.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.16.20T105 2016-06-23 New TL1 Command

7-202

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

【Change ONU Port

7.1.68 CHG-ONUPORT-MVLANTAGMODE【
】
MVLAN Tag】
l Description
This command is used to change the MVLAN tag mode of ONU port.
l Applicable NE

NE Category NE Type Notes

PON OLT C300 Series/C300v2 Series/C300v3 Series

MSAN C300Mv4 Series

l Command Format
CHG-ONUPORT-MVLANTAGMODE::(DID=device-id|DNAME=device-name)[,PID=port-id][,
OID=onu-id],ONUPORT=onu-port:CTAG::[ONUPROFILENAME=onu-profile-name],
MVLANTAGMODE=mvlan-tag-mode;
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

port

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU Under Certain
MacAddress while DID or DNAME Conditions:Must
SN/LOID/Pass- indicates the OLT choose one
word device. between OID and
(e.g. 1-1-1-2-1 ONUPROFILENAME
00-18-FE-7C-64-E4
ZTEG54998768)

7-203

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

ONUPORT String [rack-][shelf-][slo- UNI Port of ONU Required

t-]port (e.g. 3-2: slot3-port2
If no slot, 2: port2
1-1-3-2: rack1-shelf1-
slot3-port2)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

ONUPRO- String SIZE(1-64) ONU Profile NAME Required

FILENAME Under Certain
Conditions:Must
choose one
between OID and
ONUPROFILENAME
MVLAN- String Stripped MVLAN Tag Mode Required
TAGMODE NotStripped
Translated

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CHG-ONUPORT-MVLANTAGMODE::DID=10.63.204.51,OID=1-1-5-7-1,ONUPORT=1:CTAG::
MVLANTAGMODE=Stripped;
Response:
0 2016-09-20 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to change the MVLAN tag mode of
Rack1/Shelf1/Slot5/Port7/ONU1/ONU Port1 on 10.63.204.51.

7-204

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

Command 2:
CHG-ONUPORT-MVLANTAGMODE::DID=10.63.204.51,ONUPORT=1:CTAG::
ONUPROFILENAME=remote-profile,MVLANTAGMODE=Stripped;
Response:
0 2017-04-20 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to modify MVLAN tag mode of ONU profile remote-profile on
NE 10.63.204.51.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.16.20T110 2016-10-31 New TL1 Command

NetNumenU31R20V12.17.20T120 2017-4-27 New Command

Parameters ：
ONUPROFILENAME

【Change ONU Port Packet

7.1.69 CHG-ONUPORT-PACKETFILTER【
】
Filter】
l Description
This command is used to change the packet filter of ONU port .
l Applicable NE

NE Category NE Type Notes

PON OLT C300 Series/C300v2 Series/C300v3 Series

MSAN C300Mv4 Series

7-205

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

l Command Format
CHG-ONUPORT-PACKETFILTER::(DID=device-id|DNAME=device-name)[,PID=port-id],
OID=onu-id,ONUPORT=onu-port:CTAG::[PORTTYPE=port-type][,IPV4MULTICAST=
ipv4-multicast][,IPV6MULTICAST=ipv6-multicast][,IPV4BROADCAST=ipv4-broadcast]
[,RARP=rarp][,IPX=ipx][,NETBEUI=netbeui][,APPLETALK=apple-talk][,BPDU=bpdu]
[,ARP=arp][,PPPOE=pppoe];

l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

port

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU
MacAddress while DID or DNAME
SN/LOID/Pass- indicates the OLT
word device.
(e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

ONUPORT String [rack-][shelf-][slo- UNI Port of ONU Required

t-]port (e.g. 3-2: slot3-port2
If no slot, 2: port2
1-1-3-2: rack1-shelf1-
slot3-port2)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

7-206

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

PORTTYPE String Ethernet Port Type Optional

IpHost If not input, the default
port type is Ethernet

IPV4MUL- String Forward IPv4 Multicast Filter Optional

TICAST Discard

IPV6MUL- String Forward IPv6 Multicast Filter Optional

TICAST Discard

IPV4BROA- String Forward IPv4 Broadcast Filter Optional

DCAST Discard

RARP String Forward RARP Filter Optional

Discard

IPX String Forward IPX Filter Optional

Discard

NETBEUI String Forward Net BEUI Filter Optional

Discard

AP- String Forward Apple Talk Filter Optional

PLETALK Discard

BPDU String Forward BPDU Filter Optional

Discard

ARP String Forward ARP Filter Optional

Discard

PPPOE String Forward PPPoE Filter Optional

Discard

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.

l Error Code

DDOF, IIPE, EEH

Refer to Chapter 5 Unified Error Code Definition for more details.

l Example
Command 1:

CHG-ONUPORT-PACKETFILTER::DID=10.63.204.51,OID=1-1-5-7-1,ONUPORT=2
:CTAG::PORTTYPE=Ethernet,IPV4MULTICAST=Forward,BPDU=Discard;

7-207

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

Response:
0 2016-11-10 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to change the packet filter of
Rack1/Shelf1/Slot5/Port7/ONU1/UNI2 on 10.63.204.51.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.17.20T115 2016-11-15 New TL1 Command

【Bind ONU Profile to ONU】

7.1.70 BND-ONU-ONUPROFILE【 】
l Description
This command is used to bind ONU profile to ONU.
l Applicable NE

NE Category NE Type Notes

PON OLT C220v1.2/C300 Series/C300v2 Series/C300v3 Series

MSAN C300Mv4 Series

l Command Format
BND-ONU-ONUPROFILE::(DID=device-ID|DNAME=device-name)[,PID=port-id],
OID=onu-id:CTAG::(ONUPROFILENAME=onu-profile-name
|(ONULINEPROFILENAME=onu-line-profile-name,ONUREMOTEPROFILE-
NAME=onu-remote-profile-name));
l Operated Target Identifier

7-208

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

port

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU
MacAddress while DID or DNAME
SN/LOID/Pass- indicates the OLT
word device.
(e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

ONUPRO- String SIZE(1-32) ONU Profile Name Required Under Cer-

FILENAME tain Conditions:Must
choose one between
ONUPROFILENAME
and (ONULINE-
PROFILENAME，
ONUREMOTEPRO-
FILENAME)

ONULINE- String SIZE(1-32) ONU Line Profile Name Required Under Cer-
PROFILE- tain Conditions:Must
NAME choose one between
ONUPROFILENAME
and (ONULINE-
PROFILENAME，
ONUREMOTEPRO-
FILENAME)

7-209

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

ONURE- String SIZE(1-32) ONU Remote Profile Required Under Cer-

MOTEPRO- Name tain Conditions:Must
FILENAME choose one between
ONUPROFILENAME
and (ONULINE-
PROFILENAME，
ONUREMOTEPRO-
FILENAME)

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
BND-ONU-ONUPROFILE::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::
ONUPROFILENAME=testOnuProfile;
Response：
0 2013-08-20 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to bind ONU profile testOnuProfile to
Rack1/Shelf1/Slot5/Port7/ONU1 on 10.63.204.51.
Command 2:
BND-ONU-ONUPROFILE::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::
ONULINEPROFILENAME=testOnuLineProfile,ONUREMOTEPROFILENAME
=testOnuRemoteProfile;
Response：
0 2013-08-20 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;

7-210

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

Remark:
This command is used to bind ONU line profile testOnuLineProfile and ONU remote
profile testOnuRemoteProfile to Rack1/Shelf1/Slot5/Port7/ONU1 on 10.63.204.51.
Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.14.20T80 2014-08-20 New TL1 Command

NetNumenU31R20V12.14.20T80 2014-10-22 New Command Parame-

ters: ONUREMOTEPRO-
FILENAME,ONULINEPRO-
FILENAME

【 Unbind ONU Profile from

7.1.71 UBND-ONU-ONUPROFILE【
】
ONU】
l Description
This command is used to unbind ONU profile from ONU.
l Applicable NE

NE Category NE Type Notes

PON OLT C220v1.2/C300 Series/C300v2 Series

MSAN C300Mv4 Series

l Command Format
UBND-ONU-ONUPROFILE::(DID=device-ID|DNAME=device-name)[,PID=port-id],
OID=onu-id:CTAG::;

l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

7-211

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

por

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU
MacAddress while DID or DNAME
SN/LOID/Pass- indicates the OLT
word device.
(e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter
None.
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
UBND-ONU-ONUPROFILE::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::;
Response：
0 2013-08-20 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;

7-212

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

Remark:
This command is used to unbind ONU profile form Rack1/Shelf1/Slot5/Port7/ONU1
on 10.63.204.51.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.14.20T80 2014-08-20 New TL1 Command

【Restore ONU Factory

7.1.72 RESTORE-ONUFACTORYCONF【
】
Settings】
l Description
This command is used to restore ONU factory settings.
l Applicable NE

NE Category NE Type Notes

PON OLT C220v1.2/C300 Series

PON ONU F820/LAN-MDU Series/xDSL-MDU Series

l Command Format
RESTORE-ONUFACTORYCONF::(DID=device-id|DNAME=device-name)[,OID=onu-id]:
CTAG::;
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required Under

Certain Conditions:
Must choose one
between DID and
DNAME

7-213

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

DNAME String SIZE(1-32) NE Name Required Under

Certain Conditions:
Must choose one
between DID and
DNAME

OID String rack-shelf-slot- ONU ID. It's used Optional: Required

port-onu to identify the ONU if DID or DNAME
MacAddress while DID or DNAME indicates the OLT
SN/LOID/Pass- indicates the OLT device. Not required
word device. if DID or DNAME
(e.g. 1-1-1-2-1 indicates the MDU
00-18-FE-7C-64-E4 device.
ZTEG54998768)

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
RESTORE-ONUFACTORYCONF::DID=10.63.156.26,OID=1-1-5-7-1:CTAG::;
Response:
NETSH180492D1 2014-01-22 10:34:48
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to restore factory settings of Rack1/Shelf1/Slot5/Port7/ONU1
on OLT 10.63.156.26.
Command 2:
RESTORE-ONUFACTORYCONF::DID=10.63.204.101:CTAG::;
Response:
NETSH180492D1 2014-01-22 10:40:15
M CTAG COMPLD

7-214

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

EN=0 ENDESC=No Error

;
Remark:
This command is used to restore factory settings of the MDU 10.63.204.101.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.13.40T70 2014-1-26 New TL1 Command

【Change ONU UNI Configuration】

7.1.73 CHG-ONUUNI-PON【 】
l Description
This command is used to change ONU UNI configuration.
l Applicable NE

NE NE Type Notes
Category

PON OLT C220v1.1/C220v1.2/C300 Series/C300v2 Series/C300v3 Series

PON ONU F820/LAN-MDU Series/xDSL-MDU Series

l Command Format

CHG-ONUUNI-PON::(DID=device-id|DNAME=device-name)[,OID=onu-id],ONU-
PORT=onu-port:CTAG::[PORTTYPE=port-type][,STATUS=status]

[,BWTEMPLATE=bw-template][,PVC=pvc][,VLANMODE=vlan-mode,PVLAN=
pvlan,CVLAN=CVLAN][,ACCESSMODE=access-mode][,IPRETRIEVEMODE=

ip-retrieve-mode]
[,ALARMNAME=alarm-name,ALARMREPORTCONTROL=alarm-report-control];
l Operated Target Identifier

7-215

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

OID String rack-shelf-slot- ONU ID. It's used Optional

port-onu to identify the ONU
MacAddress while DID or DNAME
SN/LOID/Pass- indicates the OLT
word device.
(e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

ONUPORT String [rack-][shelf-][slot-] UNI Port of ONU Required

port (e.g. 3-2: slot3-port2
If no slot, 2: port2
1-1-3-2:rack1-shelf1-
slot3-port2)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

PORTTYPE String Ethernet UNI Port Type Optional

MulticastGEMPort If not input, the default
UnicastGEMPort UNI type is Ethernet.
WiFi
VEIP
WAN

STATUS String enable UNI Port Optional

disable Administrative Status

BWTEM- String SIZE(0-63) Bandwidth Profile Optional

PLATE Name

7-216

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

PVC String SIZE(0-32) PVC NO. Optional

Required only when
UNI is DSL

VLANMODE String tag VLAN Mode Optional

transparent
translate
trunk
hybrid

PVLAN Integer 0-4094 TLS VLAN Optional

CVLAN String SIZE(0-100) Format is : Optional

PVID-TAGVLAN1-
TAGVLAN2…
If PVID is -1, it is not
configured.

ACCESS- String oam Access Mode Optional

MODE snmp If not input, MDU uses
SNMP, and SFU uses
OAM.

IPRETRIEV- String NoControl DHCP IP Address Optional

EMODE FromONU Retrieving Mode of
FromNetwork ETH UNI，supported
Forbidden by GPON SFU.
NoControl: DHCP IP
address is retrieved
from ONU or network.
FromONU: DHCP IP
address is retrieved
from ONU.
FromNetwork: DHCP
IP address is retrieved
from network.
Forbidden: DHCP IP
address retrieving is
forbidden.

ALARM- String SelfLoopbacked ONU Port Alarm Optional

NAME Name
Only supported by
EPON.

7-217

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

ALARMRE- String Enable Alarm Report Control Optional

PORTCON- Disable Only supported by
TROL EPON.

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CHG-ONUUNI-PON::DID=10.46.41.14,OID=1-1-8-1-1,PORT=1:CTFG::STATUS=en-
able,VLANMODE=hyrbid,PVLAN=0,CVLAN=100-46-85-309;
Response：
NETSH180492D1 2012-07-03 17:54:48
M CTFG COMPLD
EN=0 ENDESC=No Error
;
Remark：
This command is used to change configuration of
Rack1/Shelf1/Slot8/Port1/ONU1/ETHUNI1 on OLT 10.46.41.14. Administrative
status is set to enable, VLAN mode is set to Hybrid, PVLAN is set to 0, PVID is set to
100, and tagged VLAN 46,85 309 are bound to this port.
Command 2:
CHG-ONUUNI-PON::DID=10.46.41.157,PORT=2-1:CTFG::STATUS=enable;
Response：
NETSH180492D1 2012-07-12 08:54:48
M CTFG COMPLD
EN=0 ENDESC=No Error
;
Remark：
This command is used to enable administrative status of Slot2/Port1 on MDU
10.46.41.157.

7-218

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

Command 3：
CHG-ONUUNI-PON::DID=DID=10.46.41.14,OID=1-1-8-1-1,ONUPORT=1:CTFG::
PORTTYPE=VEIP,VLANMODE=Tag,CVLAN=100;
Response：
NETSH180492D1 2014-03-20 11:15:22
M CTFG COMPLD
EN=0 ENDESC=No Error
;
Remark：
This command is used to change configuration of
Rack1/Shelf1/Slot8/Port1/ONU1/VEIPUNI1 on OLT 10.46.41.14. VLAN mode is set
to Tag, PVID is set to 100.
Command 4：
CHG-ONUUNI-PON::DID=DID=10.46.41.14,OID=1-1-8-1-1,ONUPORT=1:CTFG::
IPRETRIEVEMODE=FromNetwork;
Response：
NETSH180492D1 2014-09-09 10:35:12
M CTFG COMPLD
EN=0 ENDESC=No Error
;
Remark：
This command is used to change the DHCP IP address retrieving mode of
Rack1/Shelf1/Slot8/Port1/ONU1/ETHUNI1 on OLT 10.46.41.14.DHCP IP address of
the Ethernet UNI will be retrieved from network.
Command 5：
CHG-ONUUNI-PON::DID=DID=10.46.41.14,OID=1-1-8-1-1,ONUPORT=1:CTFG::
ALARMNAME=SelfLoopbacked,ALARMREPORTCONTROL=Enable;
Response：
NETSH180492D1 2017-03-08 10:35:12
M CTFG COMPLD
EN=0 ENDESC=No Error
;
Remark：
This command is used to enable the self-loopbacked alarm report of
Rack1/Shelf1/Slot5/Port7/ONU1/Ethernet port 1 on 10.46.41.14.

7-219

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.13.40T70 2014-03-20 New Command Parameters: PORTTYPE

NetNumenU31R20V12.14.20T80 2014-09-09 New Command Parameters:

IPRETRIEVEMODE

NetNumenU31R20V12.17.20T115 2017-3-9 New Command Parameters: ALARM-

NAME， ALARMREPORTCONTROL

【Update ONU Software】

7.1.74 UPDATE-ONU-SOFTWARE【 】
l Description
This command is used to update the software of ONU.
l Applicable NE

NE Category NE Type Notes

PON OLT C300v2 Series/C300v3 Series

MSAN C300Mv4 Series

l Command Format
UPDATE-ONU-SOFTWARE::(DID=device-id|DNAME=device-name),PID=port-id:CTAG::
SWVER=software-version,ONULIST=onu-list;

l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

7-220

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Required

port

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

SWVER String SIZE(1-64) ONU Software Version Required

ONULIST String SIZE(1-500) ONU List (e.g. Required

1-5/8/10)

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
UPDATE-ONU-SOFTWARE::DID=10.63.204.51,PID=1-1-5-7:CTAG::SWVER=f460914.bin,
ONULIST=1-2/7;
Response：
0 2017-04-20 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to update the software version of
Rack1/Shelf1/Slot5/Port7/ONU1 ONU2 ONU7 on 10.63.204.51.
l Average Command Response Time

7-221

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.17.20T120 2017-4-25 New TL1 Command

【Change ONU WiFi configuration】

7.1.75 CHG-ONUWIFI【 】
l Description

This command is used to change ONU WiFi configuration.

l Applicable NE

NE Category NE Type Notes

PON OLT C220v1.2/C300 Series/C300v2 Series/C300v3 Series

MSAN C300Mv4 Series

l Command Format
CHG-ONUWIFI::(DID=device-id|DNAME=device-name),OID=onu-id:CTAG::
WIFIID=wifi-id[,CHANNEL=channel][,ADMINSTAT=admin-stat]
[,RADIOMEASENABLING=radio-meas-enabling][,ISOLATIONENABLING=isolation-enabling]

[,WORKINGMODE=working-mode][,SGIENABLING=sgi-enabling]
[,REGULATORYDOMAIN=regulatory-domain][,CHANNELBANDWIDTH=channel-bandwidth]

[,QOSTYPE=qos-type][,TXRATE=tx-rate][,TXPOWER=tx-power];

l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

7-222

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU
MacAddress while DID or DNAME
SN/LOID/Pass- indicates the OLT
word device.
(e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter

Parameter Name Type Value Range Description Optional

Description

WIFIID Integer 1-8 WiFi ID Required

CHANNEL String 1-13 WiFi Channel Optional

Auto

ADMINSTAT String Enable Administrative Optional

Disable Status

RADIOMEASEN- String Enable Radio Optional

ABLING Disable Measurement
Enabling

ISOLATIONEN- String Enable Isolation Enabling Optional

ABLING Disable

WORKINGMODE String 802Dot11b Working Mode Optional

802Dot11g
802Dot11n
802Dot11b-11g
802Dot11b-11g-
11n

SGIENABLING String Enable SGI Enabling Optional

Disable Valid when
WORKING-
MODE is
802Dot11n or
802Dot11b-11g-
11n

7-223

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

REGULATORYDO- String Other Regulatory Domain Optional

MAIN USA
Canada
ETSI
Spain
France
MKK
China
Russia
Brazil
Egypt
Germany
Greece
Hongkong
Italy
Korea
UK
Portugal
Lithuania

CHANNELBAND- String 20MHz Channel Bandwith Optional

WIDTH 40MHz Valid when
WORKING-
MODE is
802Dot11n or
802Dot11b-11g-
11n

QOSTYPE String Disable QoS Type Optional

WMM
SSID

TXRATE String Auto Transmitting Rate Optional

1Mbps
2Mbps
5Dot5Mbps
6Mbps
9Mbps
11Mbps
12Mbps
18Mbps
24Mbps
36Mbps
48Mbps
54Mbps

7-224

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

TXPOWER String 100Percent Transmitting Power Optional

80Percent
60Percent
40Percent
20Percent

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.

l Response Parameters
None.
l Error Code

DDOF, IIPE, EEH

Refer to 5 Unified Error Code Defination for more details.
l Example
Command 1:
CHG-ONUWIFI::DID=10.63.156.26,OID=1-1-5-7-1:CTAG::WIFIID=1,CHANNEL=Auto;
Response:
ZTE-SH10083644D01 2013-08-30 10:41:22
M CTAG COMPLD

EN=0 ENDESC=No Error

;
Remark:
This command is used to change channel to automatic in WiFi1 of
Rack1/Shelf1/Slot5/Port7/ONU1 on NE 10.63.156.26.
Command 2:
CHG-ONUWIFI::DID=10.63.156.26,OID=1-1-5-7-1:CTAG::WIFIID=1,ADMINSTAT=Enable,
REGULATORYDOMAIN=China,WORKINGMODE=802Dot11b-11g-11n,TXRATE=12Mbps,

TXPOWER=80Percent;
Response:

ZTE-SH10083644D01 2017-05-04 10:41:22

M CTAG COMPLD

EN=0 ENDESC=No Error

;
Remark:

7-225

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

This command is used to change WiFi configuration in WiFi1 of

Rack1/Shelf1/Slot5/Port7/ONU1 on NE 10.63.156.26.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.13.40T60 2013-12-17 New TL1 Command

NetNumenU31R20V12.17.20T120 2017-5-4 Change CHANNEL from

Required to Optional
New Command
Parameters ：
ADMINSTAT,
RADIOMEASENABLING,
ISOLATIONENABLING,
SGIENABLING,
WORKINGMODE,
REGULATORYDOMAIN,
CHANNELBANDWIDTH,
QOSTYPE, TXRATE,
TXPOWER

【Change WiFi SSID】

7.1.76 CHG-ONUWIFISSID【 】
l Description
This command is used to change WiFi SSID configuration.
l Applicable NE

NE Category NE Type Notes

PON OLT C220v1.2/C300 Series/C300v2 Series

MSAN C300Mv4 Series

l Command Format
CHG-ONUWIFISSID::(DID=device-id|DNAME=device-name),OID=onu-id:CTAG::

7-226

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

WIFIID=wifi-id,SSID=ssid,ADMINSTAT=administrative-status
[,SSIDNAME=ssid-name][,HIDEENABLING=hide-enabling]
[,ISOLATIONENABLING=isolation-enabling][,MAXUSERNUM=maximum-user-number]
[,AUTHALG=authentication-algorithms][,WEPENCRYPTENABLING=wep-encryption-enabling,
WEPKEYLEN=wep-key-length,WEPKEYFORMAT=wep-key-format,
WEPKEYVALUE=wep-key-value,WEPDEFAULTKEY=wep-default-key]
[,ENCRYPT=encrypt,PASSWORD=password,
PWDUPDATEINTERVAL=password-update-interval];
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU
MacAddress while DID or DNAME
SN/LOID/Pass- indicates the OLT
word device.
(e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter

Parameter Type Value Range Description Optional

Name Description

WIFIID Inte- 1-8 WiFi ID Required

ger

SSID Inte- 1-8 WiFi SSID Required

ger

ADMINSTAT String Enable SSID Administrative Status Required

Disable

7-227

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

SSIDNAME String SIZE(1-32) SSID Name Optional

HIDEEN- String Enable Hide Enabling Optional

ABLING Disable

ISOLATIO- String Enable Isolation Enabling Optional

NENABLING Disable

MAXUSER- Inte- 1-65535 Maximum User Number Optional

NUM ger

AUTHALG String OpenSystem SSID Authentication Algorithms Optional

SharedKey
WpaPsk
Wpa2Psk
WpaPskAnd-
Wpa2Psk

WEPEN- String Enable WEP Encryption Enabling Optional

CRYPTEN- Disable Valid if
ABLING AUTHALG is
OpenSystem or
SharedKey

WEP- String 64 WEP Key Length Optional

KEYLEN 128 Valid if
AUTHALG is
OpenSystem or
SharedKey

WEPKEY- String ASCII WEP Key Format Optional

FORMAT Hex Valid if
AUTHALG is
OpenSystem or
SharedKey

WEPKEY- String SIZE(23|43|55 WEP Key Value Optional

VALUE |107) The WEP encryption key value Valid if
that consists of four groups ASCII AUTHALG is
or hex value, format as follows: OpenSystem or
WEPKEYLEN + WEPKEYFOR- SharedKey
MAT
64 + ASCII -- each group consists
of 5 bytes string
128 + ASCII -- each group consists
of 13 bytes string

7-228

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

64 + Hex -- each group consists of

10 bytes hex string
128 + Hex -- each group consists
of 26 bytes hex string
e.g.
64 + ASCII ：
a1b2c/3d4e5/6f7g8/h9i0j
64 + Hex：
123456ABCD/ABCD123456/432
DEF3245/A123456789

WEPDE- Inte- 1-4 WEP Default Key Optional

FAULTKEY ger Valid if
AUTHALG is
OpenSystem or
SharedKey

ENCRYPT String Aes WPA Encryption Algorithm Optional

Tkip Support multiple choices. The Valid if
Wep algorithm should be separated by AUTHALG is
a left slash if multiple ones are WpaPsk ,
selected Wpa2Psk or
e.g. Aes/Tkip/Wep WpaPskAnd-
Wpa2Psk

7-229

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

PASSWORD String SIZE(8-63) WPA Encryption Key Value Optional:

Valid if
AUTHALG is
WpaPsk ,
Wpa2Psk or
WpaPskAnd-
Wpa2Psk

PWDUP- Inte- 100–1000 WPA Encryption Key Updating Optional

DATEINTER- ger Interval(s) Valid if
VAL if not input, the default interval is AUTHALG is
600s WpaPsk ,
Wpa2Psk or
WpaPskAnd-
Wpa2Psk

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to 5 Unified Error Code Defination for more details.
l Example
Command 1:
CHG-ONUWIFISSID::DID=10.63.156.26,OID=1-1-5-7-1,ONUPORT=1:CTAG::WIFIID=1,
SSID=1,ADMINSTAT=Enable,SSIDNAME=zte-Test;
Response:
ZTE-SH10083644D01 2013-08-30 10:41:22
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to activate SSID1 in WiFi1 of Rack1/Shelf1/Slot5/Port7/ONU1
on 10.63.156.26, and set the name to zte-Test.

7-230

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

Command 2:
CHG-ONUWIFISSID::DID=10.63.156.26,OID=1-1-11-3-1:CTAG::WIFIID=1,
SSID=1,ADMINSTAT=Enable,SSIDNAME=zte-Test,AUTHALG=WpaPskAndWpa2Psk,
ENCRYPT=Aes/Tkip,PASSWORD=telsurzte1;
Response:
ZTE-SH10083644D01 2013-08-30 10:41:22
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This comman is used to activate SSID1 in WiFi1 of Rack1/Shelf1/Slot11/Port3/ONU1
on 10.63.156.26, and set the name to zte-Test, change the desirable authentication
algorithms and assign the WPA password.
Command 3:
CHG-ONUWIFISSID::DID=10.63.156.26,OID=1-1-11-3-1:CTAG::WIFIID=1,SSID=1,
ADMINSTAT=Enable,ADMINSTAT=Enable,SSIDNAME=zte-Test,AUTHALG=OpenSystem,
WEPENCRYPTENABLING=Enable,WEPKEYLEN=64,WEPKEYFORMAT=ASCII,
WEPKEYVALUE=12345/67890/12345/67890,WEPDEFAULTKEY=1;
Response:
ZTE-SH10083644D01 2017-05-03 11:21:12
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to activate SSID1 in WiFi1 of Rack1/Shelf1/Slot11/Port3/ONU1
on 10.63.156.26, and set the name to zte-Test, change the desirable authentication
algorithms and assign the WEP password.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

7-231

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

Revision Date Notes

NetNumenU31R20V12.13.40T60 2013-12-17 New TL1 Command

NetNumenU31R20V12.17.20T120 2017-5-3 New Command Parameters：

HIDEENABLING,ISOLATIONEN-
ABLING,
MAXUSERNUM,WEPEN-
CRYPTENABLING,
WEPKEYLEN,WEPKEYFORMAT,
WEPKEYVALUE,WEPDEFAULT-
KEY
New Command Parameter
Values：
OpenSystem, SharedKey for
AUTHALG

【Create ONU MGC User】

7.1.77 CRT-ONU-MGCUSER【 】
l Description
This command is used to create ONU MGC user information.

l Applicable NE

NE Category NE Type Notes

PON OLT C300v2 Series/C300v3 Series

MSAN C300Mv4 Series

l Command Format
CRT-ONU-MGCUSER::(DID=device-id|DNAME=device-name)[,PID=port-id][,OID=onu-id],

ONUPORT=onu-port:CTAG::[ONUPROFILENAME=onu-profile-name,]

MGCPROFILENAME=mgc-profile-name[,SIGNALCODE=signal-code]
[,MEDIAPROFILENAME=media-profile-name];

l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

7-232

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

port

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU Under Certain
MacAddress while DID or DNAME Conditions:Must
SN/LOID/Pass- indicates the OLT choose one
word device. between OID and
(e.g. 1-1-1-2-1 ONUPROFILENAME
00-18-FE-7C-64-E4
ZTEG54998768)

ONUPORT String [rack-][shelf-][slo- UNI Port of ONU Required

t-]port (e.g. 3-2: slot3-port2
If no slot, 2: port2
1-1-3-2: rack1-shelf1-
slot3-port2)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

ONUPRO- String SIZE(1-64) ONU Profile Name Required

FILENAME Under Certain
Conditions:Must
choose one
between OID and
ONUPROFILENAME

MGCPRO- String SIZE(1-64) MGC Profile Name Required

FILENAME

7-233

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

SIGNAL- String LoopStart Signal Code Optional

CODE GroundStart
LoopReverseBat-
tery
CoinFirst
DialToneFirst
Multiparty

MEDI- String SIZE(1-64) Media Profile Name Optional

APROFILE-
NAME

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CRT-ONU-MGCUSER::DID=10.63.204.51,OID=1-1-5-7-1,ONUPORT=1:CTAG::
MGCPROFILENAME=mgcprofile,SIGNALCODE=LoopStart;
Response:
0 2017-04-28 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create the ONU MGC user of Rack1/
Shelf1/Slot5/Port7/ONU1/POTS1 on NE 10.63.204.51.
：
Command 2：
CRT-ONU-MGCUSER::DID=10.63.204.51,ONUPORT=1:CTAG::
ONUPROFILENAME=remote-profile,MGCPROFILENAME=mgcprofile,
MEDIAPROFILENAME=mediaprf;
Response:
0 2017-04-28 10:55:49

7-234

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create the ONU MGC user from ONU profile remote-profile
on NE 10.63.204.51.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.17.20T120 2017-4-28 New TL1 Command

【Delete ONU MGC User】

7.1.78 DLT-ONU-MGCUSER【 】
l Description
This command is used to delete ONU MGC user information.
l Applicable NE

NE Category NE Type Notes

PON OLT C300v2 Series/C300v3 Series

MSAN C300Mv4 Series

l Command Format
DLT-ONU-MGCUSER::(DID=device-id|DNAME=device-name)[,PID=port-id][,OID=onu-id],

ONUPORT=onu-port:CTAG::[ONUPROFILENAME=onu-profile-name];
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

7-235

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

port

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU Under Certain
MacAddress while DID or DNAME Conditions:Must
SN/LOID/Pass- indicates the OLT choose one
word device. between OID and
(e.g. 1-1-1-2-1 ONUPROFILENAME
00-18-FE-7C-64-E4
ZTEG54998768)

ONUPORT String [rack-][shelf-][slo- UNI Port of ONU Required

t-]port (e.g. 3-2: slot3-port2
If no slot, 2: port2
1-1-3-2: rack1-shelf1-
slot3-port2)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

ONUPRO- String SIZE(1-64) ONU Profile Name Required

FILENAME Under Certain
Conditions:Must
choose one
between OID and
ONUPROFILENAME

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code

7-236

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

DDOF, IIPE, EEH

Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
DLT-ONU-MGCUSER::DID=10.63.204.51,OID=1-1-5-7-1,ONUPORT=1:CTAG::;
Response:
0 2017-04-28 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to delete the ONU MGC user of Rack1/
Shelf1/Slot5/Port7/ONU1/POTS1 on NE 10.63.204.51.
：
Command 2：
DLT-ONU-MGCUSER::DID=10.63.204.51,ONUPORT=1:CTAG::
ONUPROFILENAME=remote-profile;
Response:
0 2017-04-28 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to delete the ONU MGC user of POTS1 from ONU profile
remote-profile on NE 10.63.204.51.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.17.20T120 2017-4-28 New TL1 Command

7-237

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

【Delete ONU Static Route】

7.1.79 DLT-ONU-STATICROUTE【 】
l Description
This command is used to delete an ONU static route.
l Applicable NE

NE Category NE Type Notes

PON OLT C300v2 Series/C300v3 Series

MSAN C300Mv4 Series

l Command Format

DLT-ONU-STATICROUTE::(DID=device-id|DNAME=device-name)[,PID=port-id]
[,OID=onu-id]:CTAG::[ONUPROFILENAME=onu-profile-name],DESTIPADDRESS=
destination-ipaddress,DESTIPMASK=destination-ip-mask;
l Operated Target Identifier

Parameter Type Value Range Description Optional

Name Description

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot-por Port ID (e.g. 1-1-5-2) Optional

OID String rack-shelf-slot-port- ONU ID. It's used Required

onu to identify the ONU Under Certain
MacAddress while DID or DNAME Conditions:Must
SN/LOID/Password indicates the OLT choose one
device. between OID and
(e.g. 1-1-1-2-1 ONUPROFILENAME
00-18-FE-7C-64-E4
ZTEG54998768)

7-238

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

l Command Parameter

Parameter Type Value Range Description Optional

Name Description

ONUPRO- String SIZE(1-64) ONU Profile Name Required

FILENAME Under Certain
Conditions:Must
choose one
between OID and
ONUPROFILENAME

DESTIPAD- IpAd- Destination IP Required

DRESS dress Address

DESTIPMASK IpAd- Destination IP Required

dress Address Mask

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, IDNE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
DLT-ONU-STATICROUTE::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::
DESTIPADDRESS=100.200.7.0,DESTIPMASK=255.255.255.0;
Response:
0 2017-05-17 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to delete a static route of Rack1/Shelf1/Slot5/Port7/ONU1 on
10.63.204.233.
Command 2:

7-239

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

DLT-ONU-STATICROUTE::DID=10.63.204.233:CTAG::ONUPROFILENAME=
remote-profile,DESTIPADDRESS=100.200.7.0,DESTIPMASK=255.255.255.0;
Response:
0 2017-05-17 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to delete a static route from ONU profile remote-profile on NE
10.63.204.233.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.17.20T120 2017-5-17 New TL1 Command

【 Create ONU TCONT

7.1.80 CRT-ONU-TCONTBWPROFILE【
】
Bandwidth Profile】
l Description
This command is used to create ONU TCONT bandwidth profile.
l Applicable NE

NE Category NE Type Notes

PON OLT C300v2 Series/C300v3 Series

MSAN C300Mv4 Series

l Command Format
CRT-ONU-TCONTBWPROFILE::(DID=device-id|DNAME=device-name):CTAG::
PROFILENAME=profile-name,BWTYPE=bandwidth-type[,FIXEDBW=fixed-bandwidth]

7-240

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

[,ASSUREDBW=assured-bandwidth][,MAXIMUMBW=maximum-bandwidth]
[,PRIORITY=priority][,WEIGHT=weight];
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

l Command Parameter

Parameter Name Type Value Range Description Optional

Description

PROFILENAME String SIZE(1-64) Profile Name Required

BWTYPE String Fixed Bandwidth Required

Assured Type
AssuredAndNonassured
BestEffort
All

7-241

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

FIXEDBW Integer 64-9953280 Fixed Required

Bandwidth Under Certain
Unit: kbps Conditions:
BWTYPE is
Fixed or
All

ASSUREDBW Integer 64-9953280 Assured Required

Bandwidth Under Certain
Unit: kbps Conditions:
BWTYPE is
Assured,
AssuredAnd-
Nonassured or
All

MAXIMUMBW Integer 64-9953280 Maximum Required

Bandwidth Under Certain
Unit: kbps Conditions:
BWTYPE is
AssuredAnd-
Nonassured,
BestEffort or
All

PRIORITY Integer 1-4 Priority Optional: Valid

if BWTYPE is
BestEffort or
All

7-242

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

WEIGHT Integer 1-1000 Weight Optional: Valid

if BWTYPE is
BestEffort or
All

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CRT-ONU-TCONTBWPROFILE::DID=10.63.204.51:CTAG::
PROFILENAME=test,BWTYPE=Fixed,FIXEDBW=1000;
Response:
0 2017-04-27 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create ONU TCONT bandwidth profile test
with BWTYPE Fixed on 10.63.204.51.
Command 2:
CRT-ONU-TCONTBWPROFILE::DID=10.63.204.51:CTAG::
PROFILENAME=test,BWTYPE=Assured,ASSUREDBW=2000;
Response:
0 2017-04-27 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error

7-243

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

;
Remark:
This command is used to create ONU TCONT bandwidth profile test
with BWTYPE Assured on 10.63.204.51.
Command 3:
CRT-ONU-TCONTBWPROFILE::DID=10.63.204.51:CTAG::
PROFILENAME=test,BWTYPE=AssuredAndNonassured,
ASSUREDBW=2000,MAXIMUMBW=3000;
Response:
0 2017-04-27 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create ONU TCONT bandwidth profile test
with BWTYPE AssuredAndNonassured on 10.63.204.51.
Command 4:
CRT-ONU-TCONTBWPROFILE::DID=10.63.204.51:CTAG::
PROFILENAME=test,BWTYPE=BestEffort,
MAXIMUMBW=3000,PRIORITY=1,WEIGHT=100;
Response:
0 2017-04-27 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create ONU TCONT bandwidth profile test
with BWTYPE BestEffort on 10.63.204.51.
Command 5:
CRT-ONU-TCONTBWPROFILE::DID=10.63.204.51:CTAG::
PROFILENAME=test,BWTYPE=All,FIXEDBW=1000,
ASSUREDBW=2000,MAXIMUMBW=3000,PRIORITY=1,WEIGHT=100;
Response:
0 2017-04-27 10:55:49

7-244

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create ONU TCONT bandwidth profile test
with BWTYPE All on 10.63.204.51.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.17.20T120 2017-4-27 New TL1 Command

【 Delete ONU TCONT

7.1.81 DLT-ONU-TCONTBWPROFILE【
】
Bandwidth Profile】
l Description
This command is used to delete ONU TCONT bandwidth profile.
l Applicable NE

NE Category NE Type Notes

PON OLT C300v2 Series/C300v3 Series

MSAN C300Mv4 Series

l Command Format
DLT-ONU-TCONTBWPROFILE::(DID=device-id|DNAME=device-name):CTAG::
PROFILENAME=profile-name;
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

7-245

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

PROFILE- String SIZE(1-64) Profile Name Required

NAME

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
DLT-ONU-TCONTBWPROFILE::DID=10.63.204.51:CTAG::
PROFILENAME=test;
Response:
0 2017-04-27 10:56:29
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:

7-246

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

This command is used to delete ONU TCONT bandwidth profile test on 10.63.204.51.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.17.20T120 2017-4-27 New TL1 Command

【Create ONU WAN IP】

7.1.82 CRT-ONU-WANIP【 】
l Description
This command is used to create an ONU WAN IP.

l Applicable NE

NE Category NE Type Notes

PON OLT C300v2 Series/C300v3 Series

MSAN C300Mv4 Series

l Command Format
CRT-ONU-WANIP::(DID=device-id|DNAME=device-name)[,PID=port-id][,OID=onu-id]
:CTAG::[ONUPROFILENAME=onu-profile-name][,IPADDRTYPE=ip-address-type],
IPHOSTID=iphost-id,VLANPROFILENAME=vlan-profile-name,IPMODE=ip-mode[,
IPPROFILENAME=ipprofile-name][,IP=ip-address][,IPPREFIXLENGTH=
ip-prefix-length][,PPPOEMODE=pppoe-mode][,PPPOEUSER=pppoeuser]
[,PPPOEPWD=pppoe-pwd][,PPPOESERVICENAME=pppoe-service-name]
[,ONUIDENTIFIER=onuidentifier][,RSPPINGENABLING][,RSPTRACERSENABLING];
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

7-247

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

por

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU Under Certain
MacAddress while DID or DNAME Conditions:Must
SN/LOID/Pass- indicates the OLT choose one
word device. between OID and
(e.g. 1-1-1-2-1 ONUPROFILENAME
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

ONUPRO- String SIZE(1-64) ONU Profile NAME Required

FILENAME Under Certain
Conditions:Must
choose one
between OID and
ONUPROFILENAME

IPADDR- String IPv4 IP Address Type Optional

TYPE IPv6

IPHOSTID Integer 1-255 IP Host ID Required

VLANPRO- String SIZE(1-64) VLAN Profile Name Required

FILENAME

IPMODE String Static IP Configuration Mode Required

PPPoE Static: Static IP
DHCP PPPoE: PPPoE
DHCP: DHCP

7-248

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

IPPROFILE- String SIZE(1-64) IP Profile Name Optional:

NAME Valid if IPMODE is
Static

IP String IpAddress IP Address Optional:

Valid if IPMODE is
Static

IPPRE- Integer 0–128 IP Prefix Length Optional:

FIXLENGTH Valid if IPMODE is
Static

PPPOE- String Auto PPPoE Mode Optional

MODE Chap Valid if IPMODE is
Pap PPPoE

PP- String SIZE(1-32) PPPoE User Name Optional:

POEUSER Valid if IPMODE is
PPPoE

PPPOEPWD String SIZE(1-32) PPPoE Password Optional:

Valid if IPMODE is
PPPoE

PPPOESER- String SIZE(1-60) PPPoE Service Name Optional:

VICENAME Valid if IPMODE is
PPPoE

ONUIDENTI- String SIZE(1-25) ONU Identifier Optional

FIER Valid if IPMODE is
DHCP

RSPPIN- String Enable Disable Respond to Pings Optional

GENABLING Enabling

RSPTRAC- String Enable Disable Respond to Router Optional

ERSEN- Solicitation Enabling
ABLING

l Response Format

Refer to Section 4.2.2.2 for detailed TL1 command response format.

7-249

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CRT-ONU-WANIP::DID=10.63.156.26,OID=1-1-5-7-1:CTAG::VLANPROFILENAME
=VLAN100,IPHOSTID=1,IPMODE=PPPoE,PPPOEUSER=zte,PPPOEPWD=ztewan;
Response:
ZTE-SH10083644D01 2017-05-17 10:01:22
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create an ONU WAN IP information of
Rack1/Shelf1/Slot5/Port7/ONU1 on 10.63.156.26, and IP allocation mode is PPPoE.
Command 2:
CRT-ONU-WANIP::DID=10.63.156.26,OID=1-1-5-7-1:CTAG::VLANPROFILENAME
=VLAN100,IPHOSTID=1,IPMODE=DHCP;
Response:
ZTE-SH10083644D01 2017-05-17 10:01:22
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create an ONU WAN IP information of
Rack1/Shelf1/Slot5/Port7/ONU1 on 10.63.156.26, and IP allocation mode is DHCP.
Command 3:
CRT-ONU-WANIP::DID=10.63.156.26,OID=1-1-5-7-1:CTAG::VLANPROFILENAME
=VLAN100,IPHOSTID=1,IPMODE=Static,IPPROFILENAME=ipProfile,
IP=10.63.204.220,IPPREFIXLENGTH=24,RSPPINGENABLING=Enable,
RSPTRACERSENABLING=Enable;
Response:
ZTE-SH10083644D01 2017-05-17 10:01:22

7-250

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create an ONU WAN IP information of
Rack1/Shelf1/Slot5/Port7/ONU1 on 10.63.156.26, and IP allocation mode is Static.
Command 4:
CRT-ONU-WANIP::DID=10.63.156.26:CTAG::ONUPROFILENAME=remote-profile,
VLANPROFILENAME=VLAN100,IPHOSTID=1,IPMODE=DHCP;
Response:
ZTE-SH10083644D01 2017-05-17 10:01:22
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create a WAN IP of ONU profile remote-profile on NE
10.63.156.26.
Command 5:
CRT-ONU-WANIP::DID=10.63.156.26,OID=1-1-5-7-1:CTAG::IPADDRTYPE=IPv6,
VLANPROFILENAME=VLAN100,IPHOSTID=1,IPMODE=PPPoE,PPPOEUSER=zte,
PPPOEPWD=ztewan;
Response:
ZTE-SH10083644D01 2017-09-17 10:01:22
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create an ONU IPv6 WAN IP information of
Rack1/Shelf1/Slot5/Port7/ONU1 on 10.63.156.26, and IP allocation mode is PPPoE.
Command 6:
CRT-ONU-WANIP::DID=10.63.204.232,OID=1-1-4-1-7:CTAG::
IPADDRTYPE=IPv6,VLANPROFILENAME=VLAN35,IPMODE=Static,IPHOSTID=1,
IPPROFILENAME=lzz,IP="1:1:1:1:1:1:1:1";
Response:
ZTE-SH10083644D01 2017-09-17 10:01:22
M CTAG COMPLD

7-251

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

EN=0 ENDESC=No Error

;
Remark:
This command is used to create an ONU IPv6 WAN IP information of
Rack1/Shelf1/Slot5/Port7/ONU1 on 10.63.156.26, and IP allocation mode is Static.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.17.20T120 2017-5-17 New TL1 Command

NetNumenU31R20V12.17.20T125 2017-9-24 New Command Parameters：

IPADDRTYPE

【Create ONU Profile】

7.1.83 CRT-ONUPROFILE【 】
l Description
This command is used to create an ONU profile.
l Applicable NE

NE Category NE Type Notes

PON OLT C300v2 Series/C300v3 Series

MSAN C300Mv4 Series

l Command Format
CRT-ONUPROFILE::(DID=device-id|DNAME=device-name):CTAG::
PROFILETYPE=profile-type,PROFILENAME=profile-name;
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

7-252

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

l Command Parameter

Parameter Type Value Range Description Optional

Name Description

PROFILETYPE String Line Profile Type Required

Remote

PROFILENAME String SIZE(1-64) Profile Name Required

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.

l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:

CRT-ONUPROFILE::DID=10.63.204.232:CTAG::PROFILETYPE=Line,PROFILENAME=line-profi
Response:

0 2017-04-25 10:55:49
M CTAG COMPLD

EN=0 ENDESC=No Error

;
Remark:

This command is used to create an ONU line profile line-profile on NE 10.63.204.51.

l Average Command Response Time

7-253

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.17.20T120 2017-4-25 New TL1 Command

【Delete ONU Profile】

7.1.84 DLT-ONUPROFILE【 】
l Description
This command is used to delete an ONU profile.
l Applicable NE

NE Category NE Type Notes

PON OLT C300v2 Series/C300v3 Series

MSAN C300Mv4 Series

l Command Format
DLT-ONUPROFILE::(DID=device-id|DNAME=device-name):CTAG::
PROFILETYPE=profile-type,PROFILENAME=profile-name;
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

l Command Parameter

7-254

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

Parameter Name Type Value Range Description Optional Description

PROFILETYPE String Line Profile Type Required

Remote

PROFILENAME String SIZE(1-64) Profile Name Required

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code

DDOF, IIPE, EEH

Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
DLT-ONUPROFILE::DID=10.63.204.232:CTAG::PROFILETYPE=Line,PROFILENAME=line-profil

Response:
0 2017-04-25 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:

This command is used to delete an ONU line profile line-profile on NE 10.63.204.51.

l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.17.20T120 2017-4-25 New TL1 Command

7-255

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

【Change ONU Demilitarized Zone】

7.1.85 CHG-ONU-DMZ【 】
l Description
This command is used to change ONU demilitarized zone configuration.
l Applicable NE

NE Category NE Type Notes

PON OLT C300v2 Series/C300v3 Series

MSAN C300Mv4 Series

l Command Format
CHG-ONU-DMZ::(DID=device-id|DNAME=device-name)[,PID=port-id],OID=onu-id
:CTAG::[DMZENABLING=dmz-enabling][,IPHOSTID=ip-host-id]
[,LANHOSTIPTYPE=lan-host-ip-type][,LANHOSTIP=lan-host-ip];
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

port

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU
MacAddress while DID or DNAME
SN/LOID/Pass- indicates the OLT
word device.
(e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter

7-256

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

Parameter Name Type Value Range Description Optional

Description

DMZENABLING String Enable Demilitarized Optional

Disable Zone Enabling
Status

IPHOSTID Integer 1-255 IP Host ID Optional

LANHOSTIPTYPE String IPv4 LAN Host IP Type Optional

IPv6 The default value
is IPv4

LANHOSTIP String IpAddress LAN Host IP Optional

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CHG-ONU-DMZ::DID=10.63.173.78,OID=1-1-2-1-1:CTAG::DMZENABLING=Enable,IPHOSTID=
LANHOSTIPTYPE=IPv4,LANHOSTIP=13.1.1.13;
Response:
0 2017-09-20 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to change the ONU demilitarized zone configuration of Rack1/
Shelf1/Slot2/Port1/ONU1 on NE 10.63.173.78.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

7-257

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

l Revision History

Revision Date Notes

NetNumenU31R20V12.17.20T125 2017-9-22 New TL1 Command

【Change ONU UPnP Configuration】

7.1.86 CHG-ONU-UPNP【 】
l Description
This command is used to change the ONU UPnP configuration.
l Applicable NE

NE Category NE Type Notes

PON OLT C300v2 Series/C300v3 Series

MSAN C300Mv4 Series

l Command Format
CHG-ONU-UPNP::(DID=device-id|DNAME=device-name),[PID=port-id,]OID=onu-id:CTAG::
UPNPENABLING=upnp-enabling[,IPHOSTID=ip-host-id];
l Operated Target Identifier

Parameter Type Value Range Description Optional

Name Description

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one
between DID and
DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one
between DID and
DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

port

7-258

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU
MacAddress while DID or DNAME
SN/LOID/Pass- indicates the OLT
word device.
(e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter

Parameter Type Value Range Description Optional

Name Description

UPNPEN- String Enable ONU UPnP Enabling Required

ABLING Disable

IPHOSTID Integer 1-255 IP Host ID Required Under

Certain Condi-
tions:UPNPEN-
ABLING is Enable

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CHG-ONU-UPNP::DID=10.63.204.232,OID=1-1-4-8-2:CTAG::UPNPENABLING=Enable,
IPHOSTID=1;
Response:
0 2017-09-21 11:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;

7-259

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

Remark:
This command is used to change the UPnP configuration of
Rack1/Shelf1/Slot4/Port8/ONU2 on 10.63.204.232.
Command 2:
CHG-ONU-UPNP::DID=10.63.204.232,OID=1-1-4-8-2:CTAG::UPNPENABLING=Disable;
Response:
0 2017-09-21 11:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to change the UPnP configuration of
Rack1/Shelf1/Slot4/Port8/ONU2 on 10.63.204.232.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.17.20T125 2017-9-21 New TL1 Command

【Create ONU Port Forward】

7.1.87 CRT-ONU-PORTFORWARD【 】
l Description
This command is used to create ONU port forward.
l Applicable NE

NE Category NE Type Notes

PON OLT C300v2 Series/C300v3 Series

MSAN C300Mv4 Series

l Command Format

7-260

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

CRT-ONU-PORTFORWARD::(DID=device-id|DNAME=device-name)[,PID=port-id],OID=onu-id
:CTAG::PORTFWDID=port-forward-id[,PORTFWDSTAT=port-forward-stat]
[,PROTOCOLTYPE=protocol-type][,MAPPINGTYPE=mapping-type][,IPHOSTID=ip-host-id]
[,IPTYPE=ip-type][,LANHOSTIP=lan-host-ip][,LANHOSTMAC=lan-host-mac]
[,LANSTARTPORT=lan-start-port][,LANENDPORT=lan-end-port]
[,WANSTARTPORT=wan-start-port][,WANENDPORT=wan-end-port]

[,WANSTARTIP=wan-start-ip][,WANENDIP=wan-end-ip];
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

port

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU
MacAddress while DID or DNAME
SN/LOID/Pass- indicates the OLT
word device.
(e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter

Parameter Name Type Value Range Description Optional

Description

PORTFWDID Integer 1-255 Port Forward Required

Index

PORTFWDSTAT String Enable Port Forward Optional

Disable Status

7-261

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

PROTOCOLTYPE String TCP Protocol Type Optional

UDP
TCPAndUDP

MAPPINGTYPE String IP Mapping Type Optional

MAC

IPHOSTID Integer 1-255 IP Host ID Optional

IPTYPE String IPv4 IP Type Optional

IPv6 If not input, the
default IP type is
IPv4

LANHOSTIP String IpAddress LAN Host IP Optional

Required when
MAPPINGTYPE is
IP

LANHOSTMAC String MacAddress LAN Host MAC Optional

Required when
MAPPINGTYPE is
MAC

LANSTARTPORT Integer 1-65535 LAN Starting Port Optional

LANENDPORT Integer 1-65535 LAN Ending Port Optional

WANSTARTPORT Integer 1-65535 WAN Starting Port Optional

WANENDPORT Integer 1-65535 WAN Ending Port Optional

WANSTARTIP String IpAddress WAN Starting IP Optional

WANENDIP String IpAddress WAN Ending IP Optional

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CRT-ONU-PORTFORWARD::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::
PORTFWDID=1,PORTFWDSTAT=Enable,MAPPINGTYPE=IP,LANHOSTIP=2.2.2.2,
LANSTARTPORT=2121,WANSTARTIP=3.3.3.3,WANSTARTPORT=21;

7-262

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

Response:
0 2017-09-20 10:55:49
M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to create the ONU port forward of Rack1/
Shelf1/Slot5/Port7/ONU1 on NE 10.63.204.51.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.17.20T125 2017-9-20 New TL1 Command

【Delete ONU Port Forward】

7.1.88 DLT-ONU-PORTFORWARD【 】
l Description
This command is used to delete ONU port forward.
l Applicable NE

NE Category NE Type Notes

PON OLT C300v2 Series/C300v3 Series

MSAN C300Mv4 Series

l Command Format
DLT-ONU-PORTFORWARD::(DID=device-id|DNAME=device-name)[,PID=port-id],OID=onu-id
:CTAG::PORTFWDID=port-forward-id;
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

7-263

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

port

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU
MacAddress while DID or DNAME
SN/LOID/Pass- indicates the OLT
word device.
(e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

PORTFW- Integer 1-255 Port Forward Index Required

DID

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
DLT-ONU-PORTFORWARD::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::PORTFWDID=1;
Response:
0 2017-09-20 10:55:49

7-264

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

M CTAG COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to delete the ONU port forward 1 of Rack1/
Shelf1/Slot5/Port7/ONU1 on NE 10.63.204.51.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.17.20T125 2017-9-20 New TL1 Command

【Change ONU Configuration】

7.1.89 CHG-ONU-PON【 】
l Description
This command is used to change ONU configuration.
l Applicable NE

NE Category NE Type Notes

PON OLT C220v1.1/C220v1.2/C300 Only support command pa-

Series/C300v2 Series/C300v3 rameters OMCCENCRYPT
Series and UPSTREAMFECEN-
ABLING by C300v2 Series
and C300v3 Series

MSAN C300Mv4 Series Only support command pa-

rameters OMCCENCRYPT
and UPSTREAMFECEN-
ABLING

l Command Format
CHG-ONU-PON::(DID=device-id|DNAME=device-name),OID=onu-id:CTAG::[OID=
onu-id][,IPADDRESS=ip-address][,ODN=odn][,ONUNAME=onu-name]

7-265

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

[,USERNAME=user-name][,DESC=desc][,OMCCENCRYPT=omcc-encrypt]
[,ONUTYPE=onu-type][,UPSTREAMFECENABLING=upstream-fec-enabling];
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required Under

Certain Conditions:
Must choose one
between DID and
DNAME

DNAME String SIZE(1-32) NE Name Required Under

Certain Conditions:
Must choose one
between DID and
DNAME

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU
MacAddress while DID or DNAME
SN/LOID/Pass- indicates the OLT
word device.
(e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter

Parameter Name Type Value Range Description Optional

Description

IPADDRESS String SIZE(0-63) IP Address Optional

ODN String SIZE(0-63) ODN ID Optional

ONUNAME String SIZE(0-63) ONU Name Optional

USERNAME String SIZE(0-63) Username Optional

DESC String SIZE(0-63) Description of ONU Optional

OMCCENCRYPT String Enable OMCC Encryption Enabling Optional

Disable Only support GPON.

ONUTYPE String SIZE(1-64) ONU Type Optional

UPSTREAMFE- String Enable Upstream FEC Enabling Optional

CENABLING Disable Only support GPON.
Auto

7-266

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None.
l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
CHG-ONU-PON::DID=10.63.204.211,OID=1-1-5-3-1:0545::DESC=for test;
Response:
NETSH180492D1 2012-07-02 16:54:48
M 0545 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to configure description of Rack1/Shelf1/Slot5/Port3/ONU1 on
OLT 10.63.204.211.
Command 2:
CHG-ONU-PON::DID=10.46.41.14,OID=1-1-8-1-3:0545::ONUNAME=for
test,ODN=1-1,IPADDRESS=10.10.10.7,DESC=for tesbianbian,USERNAME=xubin;
Response:
NETSH180492D1 2012-07-02 16:55:48
M 0545 COMPLD
EN=0 ENDESC=No Error
;
Remark:
This command is used to configure name, ODN ID, IP address, description and
username of Rack1/Shelf1/Slot8/Port1/ONU3 on OLT 10.46.41.14.
Command 3:
CHG-ONU-PON::DID=10.46.41.14,OID=1-1-8-1-6:0545::OID=AA-BB-11-22-33-44;
Response:
NETSH180492D1 2012-07-02 16:56:29
M 0545 COMPLD

7-267

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

EN=0 ENDESC=No Error

Remark:
This command is used to configure MAC address of Rack1/Shelf1/Slot8/Port1/ONU6
on OLT 10.46.41.14.
Command 4:
CHG-ONU-PON::DID=10.63.204.211,OID=1-1-5-3-1:0545::OMCCENCRYPT=
Enable;
Response:
NETSH180492D1 2014-03-18 16:58:10
M 0545 COMPLD
EN=0 ENDESC=No Error
Remark:
This command is used to enable OMCC encryption of
Rack1/Shelf1/Slot5/Port3/ONU1 on OLT 10.63.204.211.
Command 5:
CHG-ONU-PON::DID=10.63.204.211,OID=1-1-5-3-1:0545::ONUTYPE=
F420;
Response:
NETSH180492D1 2015-12-18 13:18:13
M 0545 COMPLD
EN=0 ENDESC=No Error
Remark:
This command is used to change ONU type of Rack1/Shelf1/Slot5/Port3/ONU1 on
OLT 10.63.204.211.
Command 6:
CHG-ONU-PON::DID=10.63.204.211,OID=1-1-5-3-1:0545::UPSTREAMFECENABLING=
Enable;
Response:
NETSH180492D1 2015-07-18 13:18:13
M 0545 COMPLD
EN=0 ENDESC=No Error
Remark:
This command is used to change ONU upstream FEC enabling of
Rack1/Shelf1/Slot5/Port3/ONU1 on OLT 10.63.204.211.
l Average Command Response Time

7-268

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.13.40T70 2014-3-20 New Command Parameters:

OMCCENCRYPT

NetNumenU31R20V12.16.20T100 2015-12-23 New Command Parameters:

ONUTYPE

NetNumenU31R20V12.17.20T120 2017-7-18 New Command Parameters:

UPSTREAMFECENABLING

7.2 Resource and Query

【Query Device Information】
7.2.1 LST-DEVINFO【 】
l Description
This command is used for querying the type, software version, memory, CPU,
temperature, etc of the NE (OLT and ONU).
l Applicable NE

NE Category NE Type Notes

PON OLT C220v1.1/C220v1.2/C300 Series

PON ONU F820/LAN-MDU Series/xDSL-MDU

Series

l Command Format
LST-DEVINFO::ONUIP=onu-name|OLTID=olt-name[,PONID=ponport-location,
ONUIDTYPE=id-type,ONUID=onu-index]:CTAG::;
l Operated Target Identifier

Parameter Type Value Range Description Optional

Name Description

7-269

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

ONUIP String SIZE(128) IP address, name, or

ID of the ONU that
has management IP

OLTID String SIZE(128) OLT IP address,

name, or ID

PONID String SIZE(128) To locate a Required for the

Rack–Shelf–Slot– PON port by ONU that has no
PON Port ID Rack-Shelf-Slot-PON management IP
Port ID. Type NA
when this parameter
is absent.

ONUIDTYPE String ONU_NAME, ONU identifier

MAC, type (ONU_NAME,
LOID, ONU_NUM- MAC, LOID,
BER ONU_NUMBER)

ONUID String SIZE(128) ONU identifier. Required for the

The value could ONU that has no
be chosen from management IP
ONU_NAME,
MAC, LOID and
ONU_NUMBER to
uniquely identify an
ONU on the PON
port.

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters

Parameter Name Type Value Range Description

DEVNAME String SIZE(128) Device name

DEVIP String SIZE(128) Device IP

DT String SIZE(255) Device type

DEVER String SIZE(255) Software version

MEM Integer 0–100 Memory utilization rate

Unit: %

CPU Integer 0–100 CPU utilization rate

Unit: %

TEMPERATURE Integer -50–100 Temperature

Unit: ℃

7-270

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

l Error Code
DDOF、IIPE、EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
No.1 Command :
LST-DEVINFO::OLTID=10.63.173.78:CTAG::;

Response：
PON001 2014-02-26 16:42:30
M CTAG COMPLD
EN=0 ENDESC=No Error

totalrecord=1

List of Device Info

—————————————————–
DEVNAME DEVIP DT DEVER MEM CPU TEMPERATURE
10.63.173.78 10.63.173.78 C300v2.0 V2.0.0 45 1 53

—————————————————–
;
Remark:
This command is used to list device information of 10.63.173.78.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

7-271

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

【Query Board Information】

7.2.2 LST-BRDINFO【 】
l Description
This command is used for querying the board information such as type, status, version,
etc.
l Applicable NE

NE Category NE Type Notes

PON OLT C220v1.2/C300 Series

PON ONU F820/LAN-MDU Series/xDSL-MDU

Series

l Command Format

LST-BRDINFO::ONUIP=onu-name|OLTID=olt-name[,PONID=ponport_location,
ONUIDTYPE=id-type,ONUID=onu_index][,BOARDID=board-name]:CTAG::;
l Operated Target Identifier

Parameter Type Value Range Description Optional

Name Description

ONUIP String SIZE(128) IP address, name, or

ID of the ONU that
has management IP

OLTID String SIZE(128) OLT IP address,

name, or ID

PONID String SIZE(128) To locate a Required for the

Rack–Shelf–Slot– PON port by ONU that has no
PON Port ID Rack-Shelf-Slot-PON management IP
Port ID. Type NA
when this parameter
is absent.

ONUIDTYPE String ONU_NAME, ONU identifier

MAC, type (ONU_NAME,
LOID, ONU_NUM- MAC, LOID,
BER ONU_NUMBER)

7-272

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

ONUID String SIZE(128) ONU identifier. Required for the

The value could ONU that has no
be chosen from management IP
ONU_NAME,
MAC, LOID and
ONU_NUMBER to
uniquely identify an
ONU on the PON
port.

BOARDID String SIZE(128) To locate a board Optional. Query

Rack-Shelf-Slot by Rack-Shelf-Slot. all boards if the
Type NA when this BOARDID is
parameter is absent. absent.

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.

l Response Parameters

Parameter Name Type Value Range Description

BOARDID String SIZE(128) To locate a board by

Rack-Shelf-Slot Rack-Shelf-Slot. Type NA
when this parameter is absent.

BSTAT String Normal Board status

Fault
Offline

BOARDTYPE String SIZE(128) Board type

BSERVICE String Power Board service type

ETH
ADSL
VDSL
POTS
E1
GPON
EPON
SCU
Other

PNUM Integer 0–64 Number of ports

SWVER String SIZE(255) Software version

HWVER String SIZE(255) Hardware version

MEM Integer 0–100 Memory utilization rate

Unit: %

7-273

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

CPU Integer 0–100 CPU utilization rate

Unit: %

l Error Code
DDOF、IIPE、EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
No.1 Command :
LST-BRDINFO::OLTID=10.63.173.78:CTAG::;
Response：
PON001 2014-02-26 16:42:30
M CTAG COMPLD
EN=0 ENDESC=No Error

totalrecord=4

List of Board Info

—————————————————–
BOARDID BSTAT BOARDTYPE BSERVICE PNUM SWVER HWVER MEM CPU
1-1-0 Normal PRWG Power 0 – – 0 0
1-1-10 Normal SCTMB Control 5 V2.0.0 130100 45 1
1-1-14 Normal GTGH GPON 16 V2.0.0 120700 16 32
1-1-21 Normal GUSQ ETH 4 V2.0.0 090200 23 1
—————————————————–
;
Remark:
This command is used to list board information of 10.63.173.78.
No.2 Command :
LST-BRDINFO::OLTID=10.63.173.78,BOARDID=1-1-14:CTAG::;
Response：
PON001 2014-02-26 16:42:30
M CTAG COMPLD
EN=0 ENDESC=No Error

7-274

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

totalrecord=1

List of Board Info

—————————————————–
BOARDID BSTAT BOARDTYPE BSERVICE PNUM SWVER HWVER MEM CPU
1-1-14 Normal GTGH GPON 16 V2.0.0 120700 16 32
—————————————————–
;
Remark:
This command is used to list board information of board 1-1-14 on 10.63.173.78.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

【Query PON Port Attributes】

7.2.3 LST-OLTATTR-PON【 】
l Description
This command is used to query PON port attributes.
l Applicable NE

NE Category NE Type Notes

PON OLT C220v1.1/C220v1.2/C300 Series/C300v2 Series

l Command Format

LST-OLTATTR-PON::(DID=device-id|DNAME=device-name),(BID=board-id|

PID=port-id):CTAG::;
l Operated Target Identifier

7-275

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(0-100) NE ID Required Under

Certain Conditions:
Must choose one
between DID and
DNAME

DNAME String SIZE(0-32) NE Name Required Under

Certain Conditions:
Must choose one
between DID and
DNAME

BID String rack-shelf-slot Board ID (e.g. 1-1-15) Required Under

Certain Conditions:
Must choose one
between BID and PID

PID String rack-shelf-slot- Port ID （ e.g. Required Under

port 1-1-15-2） Certain Conditions:
Must choose one
between BID and PID

l Command Parameter
None
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters

Parameter Name Type Value Range Description

DID String SIZE(0-100) NE ID

DNAME String SIZE(0-32) NE Name

PID String rack-shelf-slot-port Port ID（e.g. 1-1-15-2）

ADMINSTATUS String up Administrative Status

down

OPERSTATUS String up Operational Status

down

HWAUTHSTAT String enable Hardware Authentication Status

disable EPON Supported.

l Error Code

7-276

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

DDOF, IIPE, EEH

Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
LST-OLTATTR-PON::DID=10.46.41.14,PID=1-1-8-1:CTAG::;
Response：
SH10083644D02 2012-07-12 15:48:38
M CTAG COMPLD
EN=0 ENDESC=No Error

totalrecord=1

List of OLT information

—————————————————–
DID DNAME PID ADMINSTATUS OPERSTATUS HWAUTHSTAT
10.46.41.14 10.46.41.14 1-1-8-1 up down disable
—————————————————–
;
Remark:
This command is used to query EPON port attributes of Rack1/Shelf1/Slot8/Port1 on
10.46.41.14.
Command 2:
LST-OLTATTR-PON::DID=10.63.194.46,BID=1-1-2:CTAG::;
Response：
AE8D4F1CB00A4CB 2014-03-17 14:46:27
M CTAG COMPLD
EN=0 ENDESC=No Error

totalrecord=8

List of OLT information

—————————————————–
DID DNAME PID ADMINSTATUS OPERSTATUS HWAUTHSTAT
10.63.194.46 10.63.194.46 1-1-2-1 up down –

7-277

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

10.63.194.46 10.63.194.46 1-1-2-2 up down –

10.63.194.46 10.63.194.46 1-1-2-3 up up –
10.63.194.46 10.63.194.46 1-1-2-4 up down –
10.63.194.46 10.63.194.46 1-1-2-5 up down –
10.63.194.46 10.63.194.46 1-1-2-6 up up –
10.63.194.46 10.63.194.46 1-1-2-7 up down –
10.63.194.46 10.63.194.46 1-1-2-8 up down –
—————————————————–
;
Remark:
This command is used to query GPON ports attributes of Rack1/Shelf1/Slot2 on
10.63.194.46.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.13.40T70 2014-03-20 New Command Parameters：BID

【Query ONU Information】

7.2.4 LST-ONU【 】
l Description
This command is used for querying all ONUs or a specific ONU under the OLT.
l Applicable NE

NE Category NE Type Notes

PON OLT C220v1.1/C220v1.2/C300 Series/C300v2 Series/C300v3

Series

PON ONU F820/LAN-MDU Series/xDSL-MDU Series

l Command Format
LST-ONU::[ONUIP=onu-ip|OLTID=olt-name[,PONID=ponport_location[,ONUIDTY-

7-278

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

PE=onuid-type,ONUID=onu-index]]]:CTAG::[NAME=onu-name];
l Operated Target Identifier

Parameter Type Value Range Description Optional

Name Description

ONUIP String SIZE(128) IP address or name Required for the ONU

of the ONU that has with management IP
management IP

OLTID String SIZE(128) OLT IP address or Optional

name

PONID String SIZE(128) To locate a Optional

Rack–Shelf–Sl- PON port by
ot–PON Port ID Rack-Shelf-Slot-PON
Port ID. Type NA
when this parameter
is absent.

ONUIDTYPE String SIZE(128) ONU identifier type: Optional

ONU_NAME
MAC
LOID
ONU_NUMBER
SN
PASSWORD

ONUID String SIZE(128) ONU identifier. Optional

The value could
be chosen from
ONU_NAME,
MAC, LOID,
ONU_NUMBER, SN
and PASSWORD to
identify a single ONU
on the PON port.

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

NAME String SIZE(1-127) ONU Name Optional

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.

l Response Parameters

7-279

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

Parameter Name Type Value Range Description

OLTID String SIZE(128) OLT IP address or name

PONID String SIZE(128) To locate a PON port by

Rack–Shelf–Slot–PON Rack-Shelf-Slot-PON Port ID.
Port ID Type NA when this parameter is
absent.

ONUNO Integer 0-512 ONU authorization number

NAME String SIZE(128) ONU name

DESC String SIZE(128) ONU description

ONUTYPE String SIZE(128) ONU type

IP String SIZE(128) ONU management IP

AUTHTYPE String ONU_NAME Authorization type. Return “--”

MAC when the authorization type is
LOID absent.
ONU_NUMBER
SN
PASSWORD

MAC String SIZE(128) Registration MAC of the ONU

LOID String SIZE(64) Return “--” in case of MAC

authorization mode

PWD String SIZE(128) LOID PASSWORD. Return “--” if

the PASSWORD is absent.

SWVER String SIZE(128) Software version

l Error Code
DDOF, IIPE
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
LST-ONU::OLTID=10.63.194.46:CTAG::;
Response：
ZTE_10.63.204.161 2013-11-12 13:58:10
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=11

7-280

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

list of ONU
—————————————————–
OLTID PONID ONUNO NAME DESC ONUTYPE IP AUTHTYPE MAC LOID PWD
SWVER
10.46.41.12 1-1-3-1 1 – – ZTE-F821-lxd – MAC 000000000062 – – V1.2.0P3C1
10.46.41.12 1-1-3-1 2 – – ZTE-F821-lxd – MAC 000000000407 – – V1.2.0P3
10.46.41.12 1-1-3-1 5 – – ZTE-F820 10.46.41.196 MAC 08181A28F427 – –
V1.1.0P3T17

10.46.41.12 1-1-3-1 6 – – ZTE-F820 10.46.41.197 MAC 000000109917 – –

V1.0.0P7T3
10.46.41.12 1-1-3-2 32 – – ZTE-F821-lxd 10.46.41.92 MAC 0000EF101991 – –
V1.2.0P3
10.46.41.12 1-1-3-2 34 – – ZTE-F821-10GAS 10.46.41.94 MAC 201310171618 –
– V1.2.0P3
10.46.41.12 1-1-6-1 1 ONU-1:1 – ZTEG-F829 – SN – ZTEG87654321 – –
10.46.41.12 1-1-6-1 2 2 – ZTE-F601 – SN – ztegDDDDDDDD – –
10.46.41.12 1-1-6-3 2 ONU-3:2 – ZTEG-F821 10.46.41.91 SN – ZTEG00123858 –
–
10.46.41.12 1-1-6-3 34 gponname – ZTEG-F821 – SN – ZTEG10097165 – –
10.46.41.12 1-1-6-5 1 ONU-5:1 – ZTEG-F829 – SN – ZTEG87654321 – –
—————————————————–
;

Remark:
This command is used to query ONU information on OLT 10.63.173.78.
：
Command 2：
LST-ONU::OLTID=10.63.194.46,PONID=1-1-9-1:CTAG::;

Response：
ZTE_10.63.204.161 2013-11-12 14:05:57

M CTAG COMPLD
EN=0 ENDESC=No Error

totalrecord=4

list of ONU
—————————————————–

7-281

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

OLTID PONID ONUNO NAME DESC ONUTYPE IP AUTHTYPE MAC LOID PWD
SWVER
10.63.194.46 1-1-9-1 5 F621-RJO8JM-001 – ZTE-D402 – SN – ZTEG55262235 – –
10.63.194.46 1-1-9-1 4 – – ZTE-D420 – LOIDONCEON – 22228760002 – –
10.63.194.46 1-1-9-1 2 – – ZTE-D420 – MAC 112233445566 – – –
10.63.194.46 1-1-9-1 1 1 – ZTE-9806 100.63.204.102 SN – znx111 – –
—————————————————–
;
Remark：
This command is used to query ONU information of Slot9/Port1 on OLT 10.63.173.78.
：
Command 3：
LST-ONU::OLTID=10.63.194.46,PONID=1-1-3-1,ONUIDTYPE=ONU_NUMBER,
ONUID=1:CTAG::;
Response：
ZTE_10.63.204.161 2013-11-12 14:09:36
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=1
list of ONU
—————————————————–
OLTID PONID ONUNO NAME DESC ONUTYPE IP AUTHTYPE MAC LOID PWD
SWVER
10.63.194.46 1-1-3-1 1 1 – E8-C – SN – 513542647247 – –
—————————————————–
;
Remark：
This command is used to query ONU information of Slot9/Port1 on OLT 10.63.173.78
by ONU identifier.
：
Command 4：
LST-ONU::ONUIP=10.63.204.102:CTAG::;
Response：
ZTE_10.63.204.161 2013-11-12 14:11:01
M CTAG COMPLD
EN=0 ENDESC=No Error

7-282

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

totalrecord=1

list of ONU
—————————————————–
OLTID PONID ONUNO NAME DESC ONUTYPE IP AUTHTYPE MAC LOID PWD
SWVER
10.63.194.46 1-1-2-1 3 wwww dddd – ZTE-9806 10.63.204.102 MAC
BBBBBBBBBBBB – – –
—————————————————–
;
Remark：
This command is used to query ONU information by management IP address
10.63.204.102.
Command 5:
LST-ONU:::CTAG::NAME=TEST_1111;
Response：
zxpon-x86-ss2 2014-03-19 14:11:40
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=2

list of ONU
—————————————————–
OLTID PONID ONUNO NAME DESC ONUTYPE IP AUTHTYPE MAC LOID PWD SWVER
10.63.204.165 1-1-6-1 6 TEST_1111 – E8-C – SN – 313131231231 – –
10.63.194.46 1-1-12-6 1 TEST_1111 – ZTE-F622 – SN – ZTEG87655321 – –
—————————————————–
;
Remark:
This command is used to query ONU information named TEST_1111.
Command 6:
LST-ONU::ONUID=ZTEG31231231:CTAG::;
Response：
zxpon-x86-ss2 2016-05-26 14:11:40

7-283

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

M CTAG COMPLD
totalrecord=1

list of ONU
—————————————————–
OLTID PONID ONUNO NAME DESC ONUTYPE IP AUTHTYPE MAC LOID PWD
SWVER
10.63.204.165 1-1-6-1 6 TEST_1111 – E8-C – SN – ZTEG31231231 – –
—————————————————–
;
Remark:
This command is used to query ONU information which ONUID is ZTEG31231231.
：
Command 7：
LST-ONU::OLTID=10.63.194.46,PONID=1-1-9-0:CTAG::;
Response：
ZTE_10.63.204.161 2017-04-18 14:05:57
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=4
list of ONU
—————————————————–
OLTID PONID ONUNO NAME DESC ONUTYPE IP AUTHTYPE MAC LOID PWD
SWVER
10.63.194.46 1-1-9-1 5 F621-RJO8JM-001 – ZTE-D402 – SN – ZTEG55262235 – –
10.63.194.46 1-1-9-1 4 – – ZTE-D420 – LOIDONCEON – 22228760002 – –
10.63.194.46 1-1-9-2 2 – – ZTE-D420 – MAC 112233445566 – – –
10.63.194.46 1-1-9-2 1 1 – ZTE-9806 100.63.204.102 SN – znx111 – –
—————————————————–
;
Remark：
This command is used to query ONU information of slot 9 on OLT 10.63.173.78.
l Average Command Response Time

Scenario Average Response Time (s)

7-284

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.13.40T70 2013-03-20 Change OLTID from Required to Optional

New Command Parameter: NAME

NetNu- 2016-05-26 Support to query ONU by ONUID(ONU

menU31R20V12.16.20T100 identifier)

NetNu- 2017-04-18 Support to query ONU by slot

menU31R20V12.17.20T120

【Query ONU State】

7.2.5 LST-ONUSTATE【 】
l Description
This command is used for querying the type, software version, memory, CPU,
temperature, etc of the NE (OLT and ONU).

l Applicable NE

NE Category NE Type Notes

PON OLT C220v1.1/C220v1.2/C300 Series/C300v2 Series/C300v3

Series

PON ONU F820/LAN-MDU Series/xDSL-MDU Series

l Command Format

LST-ONUSTATE::OLTID=olt-name,PONID=ponport_location[,ONUIDTYPE=id-type,
ONUID=onu-index]:CTAG::;

l Operated Target Identifier

Parameter Type Value Range Description Optional

Name Description

OLTID String SIZE(128) OLT IP address, Required

name, or ID

7-285

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

PONID String SIZE(128) To locate a Required

Rack–Shelf–Slot– PON port by
PON Port ID Rack-Shelf-Slot-PON
Port ID. Type NA
when this parameter
is absent.

ONUIDTYPE String ONU_NAME, ONU identifier type: Optional. Query

MAC, ONU_NAME the status of all
LOID, ONU_NUM- MAC ONUs under the
BER LOID OLT PON port if
ONU_NUMBER this parameter is
SN absent.
PASSWORD

ONUID String SIZE(128) ONU identifier. Optional. Query

The value could the status of all
be chosen from ONUs under the
ONU_NAME, OLT PON port if
MAC, LOID, this parameter is
ONU_NUMBER, absent.
SN and PASSWORD
to uniquely identify
an ONU on the PON
port.

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters

Parameter Name Type Value Range Description

ONUID String SIZE(128) ONU identifier. The value is

ONU_Number. It is used for
uniquely locating the ONU
under the PON port.

AdminState String UP Administration state

DOWN

OperState String UP Operation status

Power-Off
LOS

AUTH String MAC Authorization type

LOID

7-286

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

AUTHINFO String SIZE(64) Authorization information.

AUTHINFO is the MAC add
ress if AUTH is MAC
authorization. AUTHINFO
is LOID if AUTH is LOID
authorization.

ONUIP String SIZE(128) ONU management IP

LASTOFFTIME String SIZE(128) ONU last offline time (including

power-off and LOS). The
time format is “YYYY-MM-DD
HH-MM-SS”. Report “--” in this
field for the online ONUs.

LASTOFFREASON String Unknown ONU last offline reason.

OLTLOS Unknown: unknown reason
ONULOS OLTLOS: OLT LOS
ONULOF ONULOS: ONU LOS
ONUSF ONULOF: ONU LOF
ONULOA ONUSF: ONU SF
ONULOAM ONULOA: ONU LOA
ONUAuthorization- ONULOAM: ONU LOAM
Failed ONUAuthorizationFailed: ONU
ONUPowerOff authorization failed
ONUDeactivationSuc- ONUPowerOff: ONU power off
ceeded ONUDeactivationSucceeded:
ONUDeactivationFailed ONU deactivation succeed
ONUReboot ONUDeactivationFailed: ONU
ONUShutdown deactivation failed
ONUReboot: ONU reboot
ONUShutdown: ONU
shutdown

LASTONTIME String SIZE(128) ONU last online time. The

time format is “YYYY-MM-DD
HH-MM-SS”.

l Error Code

DDOF、IIPE、EEH

Refer to Chapter 5 Unified Error Code Definition for more details.

7-287

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

l Example
No.1 Command :
LST-ONUSTATE::OLTID=10.63.173.78,PONID=1-1-14-9:CTAG::;
Response：
PON001 2014-02-26 16:42:30
M CTAG COMPLD
EN=0 ENDESC=No Error

totalrecord=4

list of ONU state

—————————————————–
ONUID AdminState OperState AUTH AUTHINFO ONUIP LASTOFFTIME
LASTOFFREASON LASTONTIME
1 UP LOS SN ZTEG00000022 – 2014-10-27 14:49:26 ONULOS 2014-10-27
14:31:27
2 UP LOS SN ZTEG00000001 – 2014-10-15 14:29:58 ONULOS 2014-10-15
14:10:37
3 UP LOS SN 555544444444 – – – –
7 UP LOS SN ZTEG10073950 – – – –
—————————————————–
;
Remark:
This command is used to list ONU state of port 1-1-14-9 on 10.63.173.78.
No.2 Command :
LST-ONUSTATE::OLTID=10.63.173.78,PONID=1-1-14-9,ONUIDTYPE=SN,
ONUID=ZTEG00000022:CTAG::;
Response：
PON001 2014-02-26 16:42:30
M CTAG COMPLD
EN=0 ENDESC=No Error

totalrecord=1

list of ONU state

7-288

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

—————————————————–
ONUID AdminState OperState AUTH AUTHINFO ONUIP LASTOFFTIME
LASTOFFREASON LASTONTIME
1 UP LOS SN ZTEG00000022 – 2014-10-27 14:49:26 ONULOS 2014-10-27
14:31:27
—————————————————–
;
Remark:
This command is used to list ONU state of port 1-1-14-9 on 10.63.173.78.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

【List Service Port】

7.2.6 LST-SERVICEPORT【 】
l Description
This command is used to list service ports.
l Applicable NE

NE Category NE Type Notes

PON OLT C300 Series/C300v2 Series/C300v3 Series

MSAN C300M Series/C300Mv4 Series

l Command Format
LST-SERVICEPORT::(DID=device-id|DNAME=device-name)
(,PID=port-id|[,PID=port-id],OID=onu-id):CTAG::
[SERVICEPORTID=service-port-id];

7-289

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required Under Certain

Conditions: Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required Under Certain

Conditions: Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Required Under Certain

port Conditions: Must
choose one between
PID and (PID,OID)

OID String rack-shelf- ONU ID. It's used Required Under Certain
slot-port-onu to identify the ONU Conditions: Must
MacAddress while DID or DNAME choose one between
SN/LOID/Pass- indicates the OLT PID and OID
word device. (e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

SERVICE- Integer 1-128 Service Port ID Optional

PORTID If SERVICEPORTID is
not specified, all the
results will be returned,
otherwise only the
result relative with
specific attributes will be
returned.

l Response Format

Refer to Section 4.2.2.2 for detailed TL1 command response format.

l Response Parameters

Title of Response Result: "Service port information of the device " + device-id

7-290

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

Parameter Type Value Range Description

Name

DID String SIZE(1-100) NE ID

DNAME String SIZE(1-32) NE Name

PID String rack-shelf-slot-port Port ID

OID String rack-shelf-slot-port-onu ONU ID

MacAddress
SN/LOID/Password

VIFTYPE String VPort Virtual Interface Type

VIFID Integer 1–128 Virtual Interface ID

SERVICEPOR- Integer 1–128 Service Port ID

TID

DESC Octet SIZE(0-64) Service Port Description

String

ADMINSTAT String Enable Administrative Status

Disable

OPERSTAT String -- Operational Status

Deprecated

MODE String Untag Service Port Mode

UntagAndEtherType
Priority
Tag
Tls
TagAndEtherType
TagAndCosPriority
VlanRangeTag
VlanRangeTagAndEther-
Type
VlanRangeTagAndCos
CVlanTransparent
DoubleVlanTag
DoubleTlsVlan

USERETHER- String NotConfigured User Ethernet Type

TYPE PPPoE
IPoE
UserDefined

USERDE- String Hex Value: e.g. 0x8180 User Defined Ethernet Type
FETHERTYPE

USERETHER- String Enable User Ethernet Type Filter

TYPEFILTER Disable

7-291

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

ALLOWEDE- String -- Allowed User Ethernet Type

THERTYPE Deprecated

ALLOWE- String -- Allowed User Defined Ethernet

DUSERDE- Type
FETHERTYPE Deprecated

USERVID Integer 1–4094 User VLAN ID

USERSVID Integer 1–4094 User SVLAN ID

USERCOS Integer 0–7 User CoS Priority

STAR- Integer 1–4094 User Starting VLAN ID

TUSERVID

ENDVUSERID Integer 1–4094 User Ending VLAN ID

USERDSCP Integer 0–63 User DSCP Priority

NETWORKCVID Integer 1–4094 Network CVLAN ID

NETWORKC- Integer 0–7 Network CVLAN CoS Priority

TAGCOS

NETWORKSVID Integer 1–4094 Network SVLAN ID

NETWORK- Integer 0–7 Network SVLAN CoS Priority

STAGCOS

TLSSVID Integer 1–4094 TLS SVLAN ID

TLSCVID Integer 1–4094 TLS CVLAN ID

INGRESSTRAF- String SIZE(1–32) Ingress Traffic Profile

FICPRF

EGRESSTRAF- String SIZE(1–32) Egress Traffic Profile

FICPRF

QOSQUEUEID Integer 0–7 QoS Queue ID

VLANMERGE String -- VLAN Merge Enabling

Deprecated

l Error Code
DDOF、IIPE、EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
LST-SERVICEPORT::DID=10.63.204.167,OID=1-1-6-1-1:5::SERVICEPORTID=1;
Response:
ZTE_10.63.204.69 2014-09-19 11:43:15
M 5 COMPLD

7-292

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

EN=0 ENDESC=No Error

totalrecord=1

Service port information of the device 10.63.204.167

—————————————————–
DID DNAME PID OID VIFTYPE VIFID SERVICEPORTID DESC ADMINSTAT
OPERSTAT MODE USERETHERTYPE USERDEFETHERTYPE USERETHERTYPEFILTER
ALLOWEDETHERTYPE ALLOWEDUSERDEFETHERTYPE USERVID USERSVID
USERCOS STARTUSERVID ENDUSERVID USERDSCP NETWORKCVID
NETWORKCTAGCOS NETWORKSVID NETWORKSTAGCOS TLSSVID TLSCVID
INGRESSTRAFFICPRF EGRESSTRAFFICPRF QOSQUEUEID VLANMERGE
10.63.204.167 C300v2.0-10.63.204.167 – 1-1-6-1-1 VPort 1 1 –
Enable – TagAndEtherType UserDefined 0x8180 – – – 300
– – – – – 350 – – – – – – – – –
—————————————————–
;
Remark:
This command is used to list information of service port 1 of
Rack1/Shelf1/Slot6/Port1/ONU1 on 10.63.204.167.
Command 2:
LST-SERVICEPORT::DID=10.63.204.167,OID=1-1-6-1-1:5::;
Response:
ZTE_10.63.204.69 2014-09-19 11:43:15
M 5 COMPLD
EN=0 ENDESC=No Error

totalrecord=2

Service port information of the device 10.63.204.167

—————————————————–
DID DNAME PID OID VIFTYPE VIFID SERVICEPORTID DESC ADMINSTAT
OPERSTAT MODE USERETHERTYPE USERDEFETHERTYPE USERETHERTYPEFILTER
ALLOWEDETHERTYPE ALLOWEDUSERDEFETHERTYPE USERVID USERSVID

7-293

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

USERCOS STARTUSERVID ENDUSERVID USERDSCP NETWORKCVID

NETWORKCTAGCOS NETWORKSVID NETWORKSTAGCOS TLSSVID TLSCVID
INGRESSTRAFFICPRF EGRESSTRAFFICPRF QOSQUEUEID VLANMERGE
10.63.204.167 C300v2.0-10.63.204.167 – 1-1-6-1-1 VPort 1 1 –
Enable – TagAndEtherType UserDefined 0x8180 – – – 300
– – – – – 350 – – – – – – – – –
10.63.204.167 C300v2.0-10.63.204.167 – 1-1-6-1-1 VPort 1 2 desc
Disable – Tls – – – AllEtherType – – – – –
– – – – – – 200 – – – – –
—————————————————–
;
Remark:
This command is used to list information of service port of
Rack1/Shelf1/Slot6/Port1/ONU1 on 10.63.204.167.
Command 3:
LST-SERVICEPORT::DID=10.63.204.167,PID=1-1-6-1:5::;
Response:
ZTE_10.63.204.69 2016-05-27 11:43:15
M 5 COMPLD
EN=0 ENDESC=No Error

totalrecord=2

Service port information of the device 10.63.204.167

—————————————————–
DID DNAME PID OID VIFTYPE VIFID SERVICEPORTID DESC ADMINSTAT
OPERSTAT MODE USERETHERTYPE USERDEFETHERTYPE USERETHERTYPEFILTER
ALLOWEDETHERTYPE ALLOWEDUSERDEFETHERTYPE USERVID USERSVID
USERCOS STARTUSERVID ENDUSERVID USERDSCP NETWORKCVID
NETWORKCTAGCOS NETWORKSVID NETWORKSTAGCOS TLSSVID TLSCVID
INGRESSTRAFFICPRF EGRESSTRAFFICPRF QOSQUEUEID VLANMERGE
10.63.204.167 C300v2.0-10.63.204.167 1-1-6-1 – – – 1 –
Enable – TagAndEtherType UserDefined 0x8180 – – – 300
– – – – – 350 – – – – – – – – –

7-294

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

10.63.204.167 C300v2.0-10.63.204.167 1-1-6-1 – – – 2 desc

Disable – Tls – – – – – – – – –
– – – – – – 200 – – – – –
—————————————————–
;
Remark:
This command is used to list information of service port of Rack1/Shelf1/Slot6/Port1
on 10.63.204.167.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.14.20T80 2014-9-16 New TL1 Command

NetNumenU31R20V12.14.20T80 2014-11-18 New Response Parameters:VLAN-

MERGE

NetNumenU31R20V12.16.20T105 2016-3-29 New Response Parameter

Values: VlanRangeTag,
VlanRangeTagAndEtherType,
VlanRangeTagAndCos for MODE

NetNumenU31R20V12.16.20T105 2016-5-27 New Command Parameters: PID

Change OID from Required to Optional

NetNumenU31R20V12.16.20T105 2016-6-30 New Response Parameter Values:

UntagAndEtherType, Priority for MODE

NetNumenU31R20V12.17.20T115 2017-1-10 Deprecate Response Parameters:

OPERSTAT, ALLOWEDETHERTYPE,
ALLOWEDUSERDEFETHERTYPE,
VLANMERGE

【List Port QoS Priority Profile】

7.2.7 LST-PORTQOS-PRIPRF【 】
l Description

7-295

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

This command is used to list port QoS priority profile.

l Applicable NE

NE Category NE Type Notes

PON OLT C300 Series/C300v2 Series/C300v3 Series

MSAN MSAG5200V3/C300M Series/C300Mv4 Series

l Command Format

LST-PORTQOS-PRIPRF::(DID=device-id|DNAME=device-name),(PID=port-id|
(OID=onu-id[,ONUPORT=onu-port])):CTAG::[VIFID=virtual-interface-id|
SERVICENAME=service-name];
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required Under Certain

Conditions: Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required Under Certain

Conditions: Must
choose one between
DID and DNAME

PID String rack-shelf-slot-port Port ID (e.g 1-1-3-5) Required Under Certain

Conditions: Must
choose one between
PID and OID

OID String rack-shelf-slot-port- ONU ID. It's used Required Under Certain
onu to identify the Conditions: Must
MacAddress ONU while DID choose one between
SN/LOID/Password or DNAME indicates PID and OID
the OLT device.
(e.g.1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

ONUPORT String [rack-][shelf-][slot-]p- UNI Port of ONU Required Under

ort (e.g. 3-2: Certain Conditions:
slot3-port2 Must choose one
If no slot, 2: port2 between PID and
1-1-3-2: rack1- (OID,ONUPORT)
shelf1-slot3-port2)

7-296

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

VIFID Inte- 1-128 Virtual Interface ID. Optional

ger (When operated target
identifier is ONU, VIFID
means VPort number.
When operated target
identifier is physical port,
VIFID means bridge port
number. Supported by
C300v2.0/C300v3.0/C300
Mv4/C350Mv4.)

SERVICE- String SIZE(1-64) Service Name Optional

NAME

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
Title of Response Result: Port QoS Profile

Parameter Type Value Range Description

Name

DID String SIZE(1-100) NE ID

PID String rack-shelf-slot-port Port ID (e.g 1-1-3-5)

OID String rack-shelf-slot-port-onu ONU ID. It's used to identify

MacAddress the ONU while DID or DNAME
SN/LOID/Password indicates the OLT device.
(e.g.1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

ONUPORT String [rack-][shelf-][slot-]port UNI Port of ONU

(e.g. 3-2: slot3-port2
If no slot, 2: port2
1-1-3-2: rack1-shelf1-slot3-port2)

COSQUEUEMA- String SIZE(0-32) CoS Mapping Queue Profile Name

PPRF

QUEUEPRF String SIZE(0-32) Queue Block Profile Name

VIFTYPE String VPort Virtual Interface Type

VIFID Integer 1-256 Virtual Interface ID

7-297

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

l Error Code
DDNS, DDOF
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
No.1 Command :
LST-PORTQOS-PRIPRF::DID=10.61.94.35,PID=1-1-5-2:5::;
Response:
0 2004-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
totalrecord=1
Port QoS Profile
————————————-
DID PID OID ONUPORT COSQUEUEMAPPRF QUEUEPRF VIFTYPE VIFID
10.61.94.35 1-1-5-2 – – QUEUE_MAP_PRF QUEUE_BOLCK_PRF – –
————————————-
;
Remark:
This command is used to list QoS priority profile of Rack1/Shelf1/Slot5/Port2 on
10.61.94.35.
No.2 Command :
LST-PORTQOS-PRIPRF::DID=10.61.94.35,OID=1-1-5-2-1:5::VIFID=1;
Response:
0 2004-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
totalrecord=1
Port QoS Profile
————————————-
DID PID OID ONUPORT COSQUEUEMAPPRF QUEUEPRF VIFTYPE VIFID
10.61.94.35 – 1-1-5-2-1 – QUEUE_MAP_PRF QUEUE_BOLCK_PRF VPort 1
————————————-
;
Remark:

7-298

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

This command is used to list QoS priority profile of

Rack1/Shelf1/Slot5/Port2/ONU1/VPort1 on 10.61.94.35.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.14.20T80 2014-9-12 New Command Parameters:VIFID,

SERVICENAME
New Response Parameters:VIFTYPE,
VIFID

7.2.8 LST-PORT-MAXLEARNTMAC【 【Query Port Maximum Number

】
of Learnt MAC Addresses】
l Description
This command is used to query port maximum number of learnt MAC addresses.
l Applicable NE

NE Category NE Type Notes

PON OLT C300 Series/C300v2 Series

MSAN C300M Series

DSL DSL Series

l Command Format
LST-PORT-MAXLEARNTMAC::(DID=device-id|DNAME=device-name),(PID=port-id|(OID=onu-id[
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required Under Certain

Conditions:Must choose
one between DID and
DNAME

7-299

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

DNAME String SIZE(1-32) NE Name Required Under Certain

Conditions:Must choose
one between DID and
DNAME

PID String rack-shelf- Port ID (e.g. 1-1-3-5) Required Under Certain

slot-port Conditions:Must choose
one between PID and
OID

OID String rack-shelf- ONU ID. It's used to Required Under Certain
slot-port-onu identify the ONU while Conditions:Must choose
MacAddress DID or DNAME indicates one between PID and
SN/LOID/Pas- the OLT device. OID
sword (e.g.1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

ONUPORT String [rack-][shelf-][ UNI Port of ONU Required Under Certain

slot-]port (e.g. 3-2: slot3-port2 Conditions: Must choose
If no slot, 2: port2 one between PID and
1-1-3-2: rack1-shelf1- (OID,ONUPORT)
slot3-port2)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

VIFID Integer 1-256 Virtual Interface ID. Optional

(When operated target
identifier is ONU, VIFID
means VPort number.
When operated target
identifier is physical port,
VIFID means bridge port
number.)

VLANID Integer 1-4094 VLAN ID Optional

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters

Parameter Name Type Value Range Description

DID String SIZE(1-100) NE ID

DNAME String SIZE(1-32) NE Name

7-300

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

PID String rack-shelf-slot-port Port ID (e.g 1-1-3-5)

OID String rack-shelf-slot-port-onu ONU ID. It's used to identify

MacAddress the ONU while DID or DNAME
SN/LOID/Password indicates the OLT device.
(e.g.1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

ONUPORT String [rack-][shelf-][slot-]port UNI Port of ONU

(e.g. 3-2: slot3-port2
If no slot, 2: port2
1-1-3-2: rack1-shelf1-slot3-
port2)

VIFTYPE String BrgPort Virtual Interface Type

VPort

VIFID Integer 1-256 Virtual Interface ID

VLANID Integer 1-4094 VLAN ID

MACLIMITSTAT String Enable MAC Limit Status

Disable

MAXLEARNTMAC Integer 0-32768 Maximum Number of Learnt

MAC Addresses

l Error Code
DDOF、IDNE、IIPE、EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
No.1 Command :
LST-PORT-MAXLEARNTMAC::DID=10.63.204.51,PID=1-1-5-1:CTAG::;
Response:
ZTE-EB9A30BF27A 2013-04-25 12:11:22
M CTAG COMPLD
EN=0 ENDESC=No Error

totalrecord=1

Maximum learnt MAC addresses of the device 10.63.204.51 1-1-5-1

————————————————————
DID DNAME PID OID ONUPORT VIFTYPE VIFID VLANID MACLIMITSTAT

7-301

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

MAXLEARNTMAC
10.63.204.51 C300M 1-1-5-1 – – – – – Enable 20
————————————————————
;
Remark:
This command is used to query the maximum number of learnt MAC addresses of
Rack1/Shelf1/Slot5/Port1 on 10.63.204.51.
No.2 Command :
LST-PORT-MAXLEARNTMAC::DID=10.63.204.51,PID=1-1-5-1:CTAG::VLANID=4;
Response:
ZTE-EB9A30BF27A 2013-04-25 12:11:22
M CTAG COMPLD
EN=0 ENDESC=No Error

totalrecord=1

Maximum learnt MAC addresses of the device 10.63.204.51 1-1-5-1

————————————————————
DID DNAME PID OID ONUPORT VIFTYPE VIFID VLANID MACLIMITSTAT
MAXLEARNTMAC
10.63.204.51 C300M 1-1-5-1 – – – – 4 Enable 20
————————————————————
;
Remark:
This command is used to query the maximum number of learnt MAC addresses of
Rack1/Shelf1/Slot5/Port1/VLAN4 on 10.63.204.51.
No.3 Command :
LST-PORT-MAXLEARNTMAC::DID=10.63.204.51,OID=1-1-1-1-1:CTAG::VIFID=1;
Response:
ZTE-EB9A30BF27A 2013-04-25 12:11:22
M CTAG COMPLD
EN=0 ENDESC=No Error

totalrecord=1

7-302

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

Maximum learnt MAC addresses of the device 10.63.204.51 1-1-1-1-1

————————————————————
DID DNAME PID OID ONUPORT VIFTYPE VIFID VLANID MACLIMITSTAT
MAXLEARNTMAC
10.63.204.51 C300 – 1-1-1-1-1 – VPort 1 – Enable 20
————————————————————
;
Remark:
This command is used to query the maximum number of learnt MAC addresses of
Rack1/Shelf1/Slot1/Port1/ONU1/VPort1 on 10.63.204.51.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.13.20T50 2013-8-13 New Command

【Retrieve Port QoS Traffic

7.2.9 LST-PORTQOS-TRAFFICPRF【
】
Profile】
l Description
This command is used to retrieve port QoS traffic profile.
l Applicable NE

NE Category NE Type Notes

DSL DSL Series

MSAN MSAG5200/MSAG5200V3/MSAG5208/C300M
Series/C300Mv4 Series

PON OLT C300 Series/C300v2 Series/C300v3 Series

l Command Format

7-303

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

LST-PORTQOS-TRAFFICPRF::(DID=device-id|DNAME=device-name),(PID=port-id|
(OID=onu-id,ONUPORT=onu-port)):CTAG::[VINTERFACETYPE=virtual-interface-type]
[,(SVLANID=svlan-id[,CVLANID=cvlan-id]|VINTERFACEID=vinterface-id,|
(VPI=vpi,VCI=vci))][,DIRECTION=direction];
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required Under Certain

Conditions: Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required Under Certain

Conditions: Must
choose one between
DID and DNAME

PID String rack-shelf-slot-port Port ID (e.g Required Under Certain

1-1-3-5) Conditions: Must
choose one between
PID and OID

OID String rack-shelf-slot-port- ONU ID. It's used Required Under Certain
onu to identify the Conditions: Must
MacAddress ONU while DID or choose one between
SN/LOID/Password DNAME indicates PID and OID
the OLT device.
(e.g.1-1-1-2-1
00-18-FE-7C-
64-E4
ZTEG54998768)

ONUPORT String [rack-][shelf-][slot-]p- UNI Port of ONU Required Under

ort (e.g. 3-2: Certain Conditions:
slot3-port2 Must choose one
If no slot, 2: port2 between PID and
1-1-3-2: rack1- (OID,ONUPORT)
shelf1-slot3-port2)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

7-304

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

VINTER- String VLAN Virtual Interface Optional

FACETYPE BrgPort Type.
VPort (VPort is supported
by PON OLT/C300
Mv4/C350Mv4.)

SVLANID Integer 1-4094 S-VID Optional

CVLANID Integer 1-4094 C-VID Optional

VINTER- Integer 1-128 Virtual Interface ID Optional

FACEID

VPI Integer 0-255 VPI Optional

Not supported by
MSAN.

VCI Integer 0-65535 VCI Optional

Not supported by
MSAN.

DIRECTION String Ingress Direction Optional

Egress

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
Title of Response Result: Port QoS Traffic Profile

Parameter Type Value Range Description

Name

DID String SIZE(1-100) NE ID

PID String rack-shelf-slot-port Port ID (e.g 1-1-3-5)

OID String rack-shelf-slot-port-onu ONU ID. It's used to identify

MacAddress the ONU while DID or DNAME
SN/LOID/Password indicates the OLT device.
(e.g.1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

VINTERFACE- String VLAN Virtual Interface Type

TYPE BrgPort
VPort

SVLANID Integer 1-4094 S-VID

CVLANID Integer 1-4094 C-VID

VINTERFACEID Integer 1-128 Virtual Interface ID

7-305

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

DIRECTION String Ingress Direction

Egress

TRAFFICPRF String SIZE(0-32) Traffic Profile Name

VPI Integer 0-255 VPI

Not supported by MSAN.

VCI Integer 0-65535 VCI

Not supported by MSAN.

l Error Code
DDNS, DDOF
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
No.1 Command :
LST-PORTQOS-TRAFFICPRF::DID=10.61.94.35,PID=1-1-5-2:5::;
Response:
0 2004-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
totalrecord=1
Port QoS Traffic Profile
—————————————————————————
DID PID OID VINTERFACETYPE SVLANID CVLANID
VINTERFACEID DIRECTION TRAFFICPRF VPI VCI
10.61.94.35 1-1-5-2 – VLAN 5 – – Egress TEST.PRF 8 81
—————————————————————————
;
Remark:
This command is used to retrieve port QoS traffic profile of Rack1/Shelf1/Slot5/Port2
on 10.61.94.35.
No.2 Command :
LST-PORTQOS-TRAFFICPRF::DID=10.61.94.35,PID=1-1-5-2:5::
VINTERFACETYPE=BrgPort, VINTERFACEID=1;
Response:
0 2004-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error

7-306

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

totalrecord=1
Port QoS Traffic Profile
—————————————————————————
DID PID OID VINTERFACETYPE SVLANID CVLANID
VINTERFACEID DIRECTION TRAFFICPRF VPI VCI
10.61.94.35 1-1-5-2 – BrgPort – – 1 Egress TEST.PRF 8 81
—————————————————————————
;
Remark:
This command is used to retrieve port QoS traffic profile of
Rack1/Shelf1/Slot5/Port2/BrgPort1 on 10.61.94.35.

No.3 Command :
LST-PORTQOS-TRAFFICPRF::DID=10.61.94.35,PID=1-1-5-2:5::
VINTERFACETYPE=BrgPort,VPI=8,VCI=81;
Response:
0 2004-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
totalrecord=1
Port QoS Traffic Profile
—————————————————————————
DID PID OID VINTERFACETYPE SVLANID CVLANID
VINTERFACEID DIRECTION TRAFFICPRF VPI VCI
10.61.94.35 1-1-5-2 – BrgPort – – – Egress TEST.PRF 8 81
—————————————————————————
;
Remark:
This command is used to retrieve port QoS traffic profile of
Rack1/Shelf1/Slot5/Port2/BrgPort(8/81) on 10.61.94.35.
No.4 Command :
LST-PORTQOS-TRAFFICPRF::DID=10.61.94.35,OID=1-1-5-2-1:5::
VINTERFACETYPE=VPort, VINTERFACEID=1;
Response:
0 2004-04-01 10:55:49

7-307

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

M 5 COMPLD
EN=0 ENDESC=No Error
totalrecord=1
Port QoS Traffic Profile
—————————————————————————
DID PID OID VINTERFACETYPE SVLANID CVLANID
VINTERFACEID DIRECTION TRAFFICPRF VPI VCI
10.61.94.35 – 1-1-5-2-1 VPort – – 1 Egress TEST.PRF – –
—————————————————————————
;
Remark:
This command is used to retrieve port QoS traffic profile of Rack1/
Shelf1/Slot5/Port2/ONU1/VPort1 on 10.61.94.35.

l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.14.20T80 2014-9-23 New Command Parameter Values:VPort

for VINTERFACETYPE
New Response Parameter Values:VPort
for VINTERFACETYPE

【Query ONU TCONT Configuration】

7.2.10 LST-ONUTCONT【 】
l Description
This command is used to query ONU TCONT configuration.
l Applicable NE

NE Category NE Type Notes

PON OLT C220v1.2/C300 Series/C300v2 Series/C300v3 Series

7-308

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

l Command Format
LST-ONUTCONT::(DID=device-id|DNAME=device-name)[,PID=port-id][,OID=onu-id]
:CTAG::[ONUPROFILENAME=onu-profile-name];
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(0-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(0-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

port

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU Under Certain
MacAddress while DID or DNAME Conditions:Must
SN/LOID/Pass- indicates the OLT choose one
word device. between OID and
(e.g. 1-1-1-2-1 ONUPROFILENAME
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

ONUPRO- String SIZE(1-64) ONU Profile NAME Required

FILENAME Under Certain
Conditions:Must
choose one
between OID and
ONUPROFILENAME

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters

7-309

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

Title of Response Result: List of ONU TCONT information

Parameter Name Type Value Range Description

DID String SIZE(0-100) NE ID

DNAME String SIZE(0-32) NE Name

OID String rack-shelf-slot-port-onu ONU ID

-- means not supported

ONUTCONTID Integer 1-255 TCONT ID in ONU

TCONTNAME String SIZE(0-64) TCONT Name

TCONTALLOCID Integer 256-4095 Global Allocated ID of TCONT

BANDWIDTH- String SIZE(0-64) Bandwidth Profile Name

PROFILE

l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
LST-ONUTCONT::DID=10.63.173.78,OID=1-1-2-1-1:CTAG::;
Response：
SH10083644D02 2014-03-19 14:19:37
M CTAG COMPLD
EN=0 ENDESC=No Error

totalrecord=3

List of ONU TCONT information

—————————————————–
DID DNAME OID ONUTCONTID TCONTNAME TCONTALLOCID
BANDWIDTHPROFILE
10.63.173.78 MT-OLT 1-1-2-1-1 1 HSI 264 T1-10M
10.63.173.78 MT-OLT 1-1-2-1-1 2 VoIP 265 T1-5M
10.63.173.78 MT-OLT 1-1-2-1-1 3 test 266 T1-20M
—————————————————–
;
Remark:

7-310

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

This command is used to query TCONT configuration of

Rack1/Shelf1/Slot2/Port1/ONU1 on 10.63.173.78.
Command 2:
LST-ONUTCONT::DID=10.63.173.78:CTAG::ONUPROFILENAME=line-profile;
Response：
SH10083644D02 2017-07-19 14:19:37
M CTAG COMPLD
EN=0 ENDESC=No Error

totalrecord=3

List of ONU TCONT information

—————————————————–
DID DNAME OID ONUTCONTID TCONTNAME TCONTALLOCID
BANDWIDTHPROFILE
10.63.173.78 MT-OLT – HSI 264 T1-10M
10.63.173.78 MT-OLT – 2 VoIP 265 T1-5M

10.63.173.78 MT-OLT – 3 test 266 T1-20M

—————————————————–
;
Remark:
This command is used to query TCONT configuration of ONU profile line-profile on
NE 10.63.173.78.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.13.40T70 2014-3-20 New TL1 Command

7-311

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

NetNumenU31R20V12.17.20T120 2017-7-19 New Command

Parameters ：
ONUPROFILENAME

【Query ONU Configuration Information】

7.2.11 LST-ONUCFG【 】
l Description
This command is used for querying the configuration information including ONU state,
fiber length, authorization information, etc of a certain ONU.

l Applicable NE

NE Category NE Type Notes

PON OLT C220v1.2/C300 Series

PON ONU F820/LAN-MDU Series/xDSL-MDU Series

l Command Format
LST-ONUCFG::OLTID=olt-name,PONID=ponport_location,ONUIDTYPE=id-type,
ONUID=onu-index:CTAG::;
l Operated Target Identifier

Parameter Type Value Range Description Optional

Name Description

OLTID String SIZE(128) OLT IP address, Required

name, or ID

PONID String SIZE(128) To locate a Required

Rack–Shelf–Slot– PON port by
PON Port ID Rack-Shelf-Slot-PON
Port ID. Type NA
when this parameter
is absent.

ONUIDTYPE String ONU_NAME, ONU identifier Required

MAC, type (ONU_NAME,
LOID, ONU_NUM- MAC, LOID,
BER ONU_NUMBER)

7-312

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

ONUID String SIZE(128) ONU identifier. Required

The value could
be chosen from
ONU_NAME,
MAC, LOID and
ONU_NUMBER to
uniquely identify an
ONU on the PON
port.

l Response Format

Refer to Section 4.2.2.2 for detailed TL1 command response format.

l Response Parameters

Parameter Name Type Value Range Description

AdminState String UP Administration state

DOWN

OperState String UP Operation status

Power-Off
LOS

AUTHTYPE String MAC Authorization type

LOID
LOIDONCEON

AUTHINFO String SIZE(64) Authorization information.

If AUTHTYPE is MAC
authorization, AUTHINFO
is MAC address. If AUTHTYPE
is LOID authorization,
AUTHINFO is LOID.

Length Double 0–100 Optical fiber length

Unit: km

UsFixedBw Integer 0–40000 Upstream fixed bandwidth

Unit: Mbit/s

UsAssuredBw Integer 0–40000 Upstream assured bandwidth

Unit: Mbit/s

UsMaxBw Integer 0–40000 Upstream maximum bandwidth

Unit: Mbit/s

DsMaxBw Integer 0–40000 Downstream maximum

bandwidth
Unit: Mbit/s

7-313

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

l Error Code
DDOF、IIPE、EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
No.1 Command :
LST-ONUCFG::OLTID=10.63.173.78,PONID=1-1-14-9,ONUIDTYPE=SN,
ONUID=ZTEGC409D896:CTAG::
Response：
PON001 2014-02-26 16:42:30
M CTAG COMPLD
EN=0 ENDESC=No Error

totalrecord=1

list of ONU configuration

—————————————————–
AdminState OperState AUTHTYPE ONUID Length UsFixedBw UsAssuredBw
UsMaxBw DsMaxBw
UP UP SN ZTEGC409D896 0.0050 – – – –
—————————————————–
;
Remark:
This command is used to list ONU configuration of port 1-1-14-9 on 10.63.173.78.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

7-314

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

【Query Optical Module DDM Information】

7.2.12 LST-OMDDM【 】
l Description
This command is used to query the optical module DDM information including ETH
optical module, OLT PON optical module, and ONU PON optical module.
l Applicable NE

NE Category NE Type Notes

PON OLT C300 Series/C300v2 Series/C300v3 Series

PON ONU F820/LAN-MDU Series/xDSL-MDU Series

l Command Format
LST-OMDDM::ONUIP=onu-name|OLTID=olt-name[,PONID=ponport_location[,ONU-
IDTYPE=id-type,ONUID=onu-index]][,PORTID=lanport_index][,PEERFLAG=flag]
[,FRDB=from-database]:CTAG::[CHANNELID=channel-id];
l Operated Target Identifier

Parameter Type Value Range Description Optional

Name Description

ONUIP String SIZE(128) IP address or name Required for the ONU

of the ONU that has with management IP
management IP

OLTID String SIZE(128) OLT IP address or Required for the

name ONU that has no
management IP

PONID String SIZE(128) To locate a Optional

Rack-Shelf-Slot- PON port by
PON Port ID Rack-Shelf-Slot-PON
Port ID. Type NA
when this parameter
is absent.

ONUIDTYPE String SIZE(128) ONU_NAME, Optional

MAC, LOID,
ONU_NUMBER

ONUID String SIZE(128) ONU identifier. The Optional

value could be one
of ONU_NAME,
MAC, LOID and
ONU_NUMBER to
identify a single ONU
on the PON port.

7-315

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

PORTID OCTET SIZE(128) To locate a port by Optional

STRING Rack-Shelf-Slot- Rack-Shelf-Slot-Port It is used to query
Port ID ID. Type NA when this uplink optical module
parameter is absent. information.

PEERFLAG OCTET True The default value Optional

STRING False is False. It is
used to optical
power information
of opposite end.

FRDB OCTET True From Database. If Optional

STRING False it is true, statistical
data are got from
database. Otherwise,
from NE.
The pre-condition of
using statistical data
in database is that the
policy of "AccessLay-
erDevice_Resource
and Performance
Data Retrieve Policy"
has run successfully.

l Command Parameter

Parameter Name Type Value Range Descrip- Optional

tion Description

CHANNELID Integer 1-8 Channel ID Optional

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters

Title of Response Result: List of Optical Power Info

Parameter Name Type Value Range Description

ONUID OCTET SIZE(128) Return “--” when querying the

STRING OLT optical module.
Return the ONU identifier
when querying the ONU optical
module, and the value is
ONU_Number.

7-316

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

RxPower OCTET -40 - 10 Receiving optical power

STRING unit: dBm

RxPowerR OCTET Normal To check whether the receiving

STRING High optical power is normal.
Low

TxPower OCTET -40 - 10 Transmission optical power

STRING unit: dBm

TxPowerR OCTET Normal To check whether the

STRING High transmission optical power
Low is normal.

CurrTxBias OCTET 0 - 131 Bias current

STRING unit: mA

CurrTxBiasR OCTET Normal To check whether the bias

STRING High current is normal.
Low

Temperature OCTET -45 - 90 Temperature

STRING unit: ℃

TemperatureR OCTET Normal To check whether the

STRING High temperature is normal.
Low

Voltage OCTET 0 - 6.55 Power supply voltage

STRING unit: V

VoltageR OCTET Normal To check whether the power

STRING High supply voltage is normal.
Low

PTxPower OCTET -40 - 10 Transmission power supply of

STRING the opposite end
unit: dBm

7-317

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

PRxPower OCTET -40 - 10 Receiving power supply of the

STRING opposite end
unit: dBm

ChannelId Integer 1-8 Channel ID

This response parameter will be
shown only when the parameter
'port.isSupportComboPon'
in the TL1 configuration file
'an-pon-tl1-param.properties' is
enable.The default value of this
parameter is disable.

l Error Code
DDOF, IIPE
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
LST-OMDDM::OLTID=10.46.41.14,PONID=1-1-7-1:CTAG::;
Response：
ZTE_10.63.204.128 2014-05-07 09:53:54
M CTAG COMPLD
EN=0 ENDESC=No Error

totalrecord=1

List of Optical Power Info

—————————————————–
ONUID RxPower RxPowerR TxPower TxPowerR CurrTxBias CurrTxBiasR
Temperature TemperatureR Voltage VoltageR PTxPower PRxPower
– – – 4.122 Normal 7.858 Normal 43.75 Normal 3.352 Normal – –
—————————————————–
;
Remark:
This command is used to query PON port optical module DDM information from OLT.

7-318

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

：
Command 2：
LST-OMDDM::OLTID=10.46.41.14,PONID=1-1-6-5,ONUIDTYPE=SN,ONUID=ZTEG-
00E00008:CTAG::;
Response：
ZTE_10.63.204.128 2014-05-07 09:59:18
M CTAG COMPLD
EN=0 ENDESC=No Error

totalrecord=1

List of Optical Power Info

—————————————————–
ONUID RxPower RxPowerR TxPower TxPowerR CurrTxBias CurrTxBiasR
Temperature TemperatureR Voltage VoltageR PTxPower PRxPower
16 -17.049 Normal 1.938 Normal 14.976 Normal 33.863 Normal 3.32 Normal – –
—————————————————–

;
Remark：
This command is used to query ONU optical module DDM information from OLT.
：
Command 3：
LST-OMDDM::OLTID=10.46.41.14,PONID=1-1-6-5,PEERFLAG=true:CTAG::;
Response：
ZTE_10.63.204.128 2014-05-07 10:01:26
M CTAG COMPLD
EN=0 ENDESC=No Error

totalrecord=7

List of Optical Power Info

—————————————————–
ONUID RxPower RxPowerR TxPower TxPowerR CurrTxBias CurrTxBiasR
Temperature TemperatureR Voltage VoltageR PTxPower PRxPower

7-319

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

– – – 3.239 Normal 12.814 Normal 49.3 Normal 3.155 Normal – –

1 -20.044 Normal – – 14.784 Normal 33.003 Normal 3.32 Normal 1.978 -16.98
2––––––––––––
11 -20.07 Normal – – 14.8 Normal 33.027 Normal 3.32 Normal 1.928 -16.98
12 – – – – – – – – – – – –
13 – – – – – – – – – – – –
16 -20.044 Normal – – 14.77 Normal 32.968 Normal 3.3 Normal 1.987 -17.032
—————————————————–
;
Remark：
This command is used to query PON port optical module DDM information from OLT,
including information of ONU.
：
Command 4：
LST-OMDDM::OLTID=10.63.193.209,PORTID=1-1-19-2:CTAG::;
Response：
ZTE_10.63.204.128 2014-05-07 10:01:26
M CTAG COMPLD
EN=0 ENDESC=No Error

totalrecord=1

List of Optical Power Info

—————————————————–
ONUID RxPower RxPowerR TxPower TxPowerR CurrTxBias CurrTxBiasR
Temperature TemperatureR Voltage VoltageR PTxPower PRxPower
– -30.659 Normal -5.026 Normal 7.83 Normal 40.968 Normal 3.223 Normal – –
—————————————————–
;
Remark：
This command is used to query uplink port optical module DDM information from OLT.
Command 5:
LST-OMDDM::OLTID=10.46.41.14,PONID=1-1-6-5,ONUIDTYPE=SN,ONUID=ZTEG-
00E00008:CTAG::FRDB=True;
Response：

7-320

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

ZTE_10.63.204.128 2014-05-07 10:59:23

M CTAG COMPLD
EN=0 ENDESC=No Error

totalrecord=1

List of Optical Power Info

—————————————————–
ONUID RxPower RxPowerR TxPower TxPowerR CurrTxBias CurrTxBiasR
Temperature TemperatureR Voltage VoltageR PTxPower PRxPower
16 -17.049 Normal 1.938 Normal 14.976 Normal 33.863 Normal 3.32 Normal – –
—————————————————–
;
Remark:
This command is used to query ONU optical module DDM information from database.
：
Command 6：
LST-OMDDM::OLTID=10.63.193.209,PORTID=1-1-19-2:CTAG::CHANNELID;
Response：
ZTE_10.63.204.128 2014-05-07 10:01:26
M CTAG COMPLD
EN=0 ENDESC=No Error

totalrecord=1

List of Optical Power Info

—————————————————–
ONUID RxPower RxPowerR TxPower TxPowerR CurrTxBias CurrTxBiasR
Temperature TemperatureR Voltage VoltageR PTxPower PRxPower ChannelId
– -30.659 Normal -5.026 Normal 7.83 Normal 40.968 Normal 3.223 Normal – – 1
—————————————————–
;
Remark：
This command is used to query optical module DDM information of PON port channel
1 from OLT(supporting combo PON).

7-321

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

：
Command 7：
LST-OMDDM::OLTID=10.63.193.209,PORTID=1-1-19-2:CTAG::;
Response：
ZTE_10.63.204.128 2014-05-07 10:01:26
M CTAG COMPLD
EN=0 ENDESC=No Error

totalrecord=1

List of Optical Power Info

—————————————————–
ONUID RxPower RxPowerR TxPower TxPowerR CurrTxBias CurrTxBiasR
Temperature TemperatureR Voltage VoltageR PTxPower PRxPower ChannelId
– -30.659 Normal -5.026 Normal 7.83 Normal 40.968 Normal 3.223 Normal – – 1

– -30.659 Normal -5.026 Normal 7.83 Normal 40.968 Normal 3.223 Normal – – 2
—————————————————–
;
Remark：
This command is used to query optical module DDM information of PON port from
OLT(supporting combo PON).
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.13.40T70 2014-05-07 New Command Parameters: FRDB

NetNu- 2016-08-30 New Command Parameters: CHANNELID

menU31R20V12.16.20T110 New Response Parameters: ChannelId

7-322

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

【Query LAN Port Information】

7.2.13 LST-LANPORT【 】
l Description
This command is used to query LAN port information.
l Applicable NE

NE Category NE Type Notes

PON OLT C220v1.1/C220v1.2/C300 Series/C300v2 Series/C300v3 Series

PON ONU F820/LAN-MDU Series/xDSL-MDU Series

l Command Format

LST-LANPORT::ONUIP=onu-name|(OLTID=olt-name[,PONID=ponport_location,
ONUIDTYPE=onuid-type,ONUID=onu-index])[,PORTID=port_index]:CTAG::;
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

ONUIP OC- SIZE(1-128) IP address or name, or Required for the ONU

TET ID of the ONU which that has management
STR- has management IP IP
ING

OLTID OC- SIZE(1-128) OLT IP address or Required for the OLT

TET name, ID or the ONU that has
STR- no management IP
ING

PONID OC- SIZE(1-128) PON Port location Required for the

TET information, located ONU that has no
STR- by Rack-Shelf-Slot- management IP
ING PON Port, Type NA
when this parameter
is absent

ONUID- OC- ONU_NAME ONU Identifier type Required for the

TYPE TET ONU_NUMBER ONU that has no
STR- MAC management IP
ING LOID
SN
PASSWORD

7-323

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

ONUID OC- SIZE(1-128) ONU Identifier, the Required for the

TET value could be chosen ONU that has no
STR- from ONU_NAME, management IP
ING MAC, LOID,
ONU_NUMBER, SN
and PASSWORD,one
of which could identify
a single ONU of PON
port.

PORTID OC- SIZE(1-128) To locate the Optional

TET LAN port by
STR- Rack-Shelf-Slot-LAN
ING Port ID; Type NA
when this parameter
is absent.

l Command Parameter
None.
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters

Title of Response Result: "list of lan port info"

Parameter Type Value Range Description

Name

ONUIP OCTET SIZE(0-128) ONU management IP，Return “--”

STRING when ONU IP is absent.

OLTID OCTET SIZE(0-128) OLT IP address or name, ID.

STRING

PONID OCTET SIZE(0-128) PON Port location information,

STRING located by Rack-Shelf-Slot-PON
Port，Return “--” when ONU IP is
absent.

ONUID OCTET SIZE(0-128) ONU Identifier，Return “--” when

STRING ONU IP is absent.

PORTID OCTET SIZE(0-128) LAN port ID，Return “--” when

STRING ONU IP is absent.

ADMINSTATUS OCTET UP Administrative status.

STRING DOWN

7-324

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

DUPLEX OCTET Full Working mode.

STRING Half
Auto
Auto-Full
Auto-Half

SPEED OCTET Auto Speed.

STRING 10M
100M
1000M
Auto-10M
Auto-100M
Auto-1000M

RateLimitUs INTE- 0-1000000 Upstream rate limit (Unit:kbps).

GER

RateLimitDs INTE- 0-1000000 Downstream rate limit (Unit:kbps).

GER

l Error Code
DDOF、EEEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
No.1 Command:
LST-LANPORT::OLTID=10.63.194.46:CTAG::;
Response:
ZTE_10.63.204.161 2013-11-13 10:29:02
M CTAG COMPLD
EN=0 ENDESC=No Error

totalrecord=4
list of lan port info
—————————————————–
ONUIP OLTID PONID ONUID PORTID ADMINSTATUS DUPLEX SPEED
RateLimitUs RateLimitDs
– 10.63.194.46 – – 1-1-20-1 UP Full 10000 – –
– 10.63.194.46 – – 1-1-20-2 UP Full 10000 – –
– 10.63.194.46 – – 1-1-20-3 UP Full – – –
– 10.63.194.46 – – 1-1-20-4 UP Full – – –

7-325

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

—————————————————–
;
Remark:
This command is used to query all the LAN port information for OLT.
No.2 Command:
LST-LANPORT::OLTID=10.63.194.46,PORTID=1-1-20-1:CTAG::;
Response:
ZTE_10.63.204.161 2013-11-13 10:29:22
M CTAG COMPLD
EN=0 ENDESC=No Error

totalrecord=1

list of lan port info

—————————————————–
ONUIP OLTID PONID ONUID PORTID ADMINSTATUS DUPLEX SPEED
RateLimitUs RateLimitDs
– 10.63.194.46 – – 1-1-20-1 UP Full 10000 – –
—————————————————–
;
Remark:
This command is used to query the specified LAN port information for OLT.
No.3 Command:
LST-LANPORT::OLTID=10.63.194.46,PONID=1-1-9-1,ONUIDTYPE=MAC,
ONUID=11-22-33-44-55-66:CTAG::;
Response:
ZTE_10.63.204.161 2013-11-13 10:37:09
M CTAG COMPLD
EN=0 ENDESC=No Error

totalrecord=4
list of lan port info
—————————————————–

7-326

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

ONUIP OLTID PONID ONUID PORTID ADMINSTATUS DUPLEX SPEED

RateLimitUs RateLimitDs
– 10.63.194.46 1-1-9-1 2 1-1-1-1 UP Auto Auto – –
– 10.63.194.46 1-1-9-1 2 1-1-1-2 UP Auto Auto – –
– 10.63.194.46 1-1-9-1 2 1-1-1-3 UP Auto Auto – –
– 10.63.194.46 1-1-9-1 2 1-1-1-4 UP Auto Auto – –
—————————————————–
;
Remark:
This command is used to query all the LAN port information for the ONU that has no
management IP.
：
No.4 Command:：
LST-LANPORT::OLTID=10.63.194.46,PONID=1-1-3-1,ONUIDTYPE=LOID,
ONUID=56666789888,PORTID=1-1-1-1:CTAG::;
Response:
ZTE_10.63.204.161 2013-11-13 10:36:22
M CTAG COMPLD
EN=0 ENDESC=No Error

totalrecord=1
list of lan port info
—————————————————–
ONUIP OLTID PONID ONUID PORTID ADMINSTATUS DUPLEX SPEED
RateLimitUs RateLimitDs
– 10.63.194.46 1-1-3-1 10 1-1-1-1 UP Auto Auto 0 0
—————————————————–
;
Remark:
This command is used to query specified LAN port information for the ONU that has
no management IP.
No.5 Command:
LST-LANPORT::ONUIP=10.63.204.102:CTAG::;
Response:
ZTE_10.63.204.161 2013-11-13 10:41:35
M CTAG COMPLD

7-327

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

EN=0 ENDESC=No Error

totalrecord=16
list of lan port info
—————————————————–
ONUIP OLTID PONID ONUID PORTID ADMINSTATUS DUPLEX SPEED
RateLimitUs RateLimitDs
10.63.204.102 10.63.194.46 1-1-9-1 1 1-1-1-1 UP Full 10M 1024 2048
10.63.204.102 10.63.194.46 1-1-9-1 1 1-1-1-2 UP Full 10M 0 2048
10.63.204.102 10.63.194.46 1-1-9-1 1 1-1-1-3 UP – – 0 0
10.63.204.102 10.63.194.46 1-1-9-1 1 1-1-1-4 UP – – 0 0
10.63.204.102 10.63.194.46 1-1-9-1 1 1-1-1-5 UP – – 0 0
10.63.204.102 10.63.194.46 1-1-9-1 1 1-1-1-6 UP – – 0 0
10.63.204.102 10.63.194.46 1-1-9-1 1 1-1-1-7 UP – – 0 0
10.63.204.102 10.63.194.46 1-1-9-1 1 1-1-1-8 UP – – 0 0
10.63.204.102 10.63.194.46 1-1-9-1 1 1-1-1-9 UP – – 0 0
10.63.204.102 10.63.194.46 1-1-9-1 1 1-1-1-10 UP – – 0 0
10.63.204.102 10.63.194.46 1-1-9-1 1 1-1-1-11 UP – – 1000 1000
10.63.204.102 10.63.194.46 1-1-9-1 1 1-1-1-12 UP – – 0 0
10.63.204.102 10.63.194.46 1-1-9-1 1 1-1-1-13 UP – – 0 0
10.63.204.102 10.63.194.46 1-1-9-1 1 1-1-1-14 UP – – 0 0
10.63.204.102 10.63.194.46 1-1-9-1 1 1-1-1-15 UP – – 0 0
10.63.204.102 10.63.194.46 1-1-9-1 1 1-1-1-16 UP – – 0 0
—————————————————–
;
Remark:
This command is used to query all the LAN port information for the ONU that has
management IP.
No.6 Command:
LST-LANPORT::ONUIP=10.63.204.102,PORTID=1-1-1-1:CTAG::;
Response:
ZTE_10.63.204.161 2013-11-13 10:46:03
M CTAG COMPLD
EN=0 ENDESC=No Error

7-328

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

totalrecord=1

list of lan port info

—————————————————–
ONUIP OLTID PONID ONUID PORTID ADMINSTATUS DUPLEX SPEED
RateLimitUs RateLimitDs
10.63.204.102 10.63.194.46 1-1-9-1 1 1-1-1-1 UP Full 10M 1024 2048
—————————————————–
;
Remark:
This command is used to query specified LAN port information for the ONU that has
management IP.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

【Query LAN Port Performance】

7.2.14 LST-LANPERF【 】
l Description
This command is used for querying the ETH performance information of the OLT uplink
port or ONU LAN port.
l Applicable NE

NE Category NE Type Notes

PON OLT C220v1.2/C300 Series

PON ONU F820/LAN-MDU Series/xDSL-MDU Series

l Command Format

7-329

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

LST-LANPERF::ONUIP=onu_name|OLTID=olt_name[,PONID=ponport_location,
NUIDTYPE=id-type,ONUID=onu_index],PORTID=lanport_index:CTAG::;
l Operated Target Identifier

Parameter Type Value Range Description Optional

Name Description

ONUIP String SIZE(128) IP address, name, or

ID of the ONU that
has management IP

OLTID String SIZE(128) OLT IP address,

name, or ID

PONID String SIZE(128) To locate a Required for the

Rack–Shelf–Slot– PON port by ONU that has no
PON Port ID Rack-Shelf-Slot-PON management IP
Port ID. Type NA
when this parameter
is absent.

ONUIDTYPE String ONU_NAME, ONU identifier

MAC, type (ONU_NAME,
LOID, ONU_NUM- MAC, LOID,
BER ONU_NUMBER)

ONUID String SIZE(128) ONU identifier. Required for the

The value could ONU that has no
be chosen from management IP
ONU_NAME,
MAC, LOID and
ONU_NUMBER to
uniquely identify an
ONU on the PON
port.

PORTID String SIZE(128) To locate an OLT uplink port or

Rack–Shelf–Slot– ONU port by ONU LAN port
ONU Port ID Rack-Shelf-Slot-ONU
Port ID. Type NA
when this parameter
is absent.

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.

l Response Parameters

7-330

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

Parameter Type Value Range Description Note

Name

OutPkts Double 0–1.85E19 Number of outgoing

packets

InPkts Double 0–1.85E19 Number of incoming

packets

OutOctets Double 0–1.85E19 Number of outgoing

octets

InOctets Double 0–1.85E19 Number of incoming

octets

CRC Double 0–1.85E19 Number of incoming

packets with CRC
errors

UnderSizeP- Double 0–1.85E19 Number of incoming

kts undersize packets

OverSizePkts Double 0–1.85E19 Number of incoming

oversize packets

InErrors Double 0–1.85E19 Number of incoming

error packets

OutErrors Double 0–1.85E19 Number of outgoing

error packets

InDiscards Double 0–1.85E19 Number of incoming

packets that were
discarded

OutDiscards Double 0–1.85E19 Number of outgoing

packets that were
discarded

InUnicastPkts Double 0–1.85E19 Number of incoming

unicast packets

InMulticastP- Double 0–1.85E19 Number of incoming

kts multicast packets

InBroadcastP- Double 0–1.85E19 Number of incoming

kts broadcast packets

OutUnicastP- Double 0–1.85E19 Number of outgoing

kts unicast packets

OutMulticas- Double 0–1.85E19 Number of outgoing

tPkts multicast packets

OutBroad- Double 0–1.85E19 Number of outgoing

castPkts broadcast packets

7-331

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

StateChange- Integer 0– 4294967295 State change counters Optional

Counters

l Error Code
DDOF、IIPE、EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command :
LST-LANPERF::OLTID=10.63.173.78,PONID=1-1-14-9,ONUIDTYPE=SN,
ONUID=ZTEGC409D8CB,ONUPORT=1-1-1-1:CTAG::;
Response：
PON001 2014-02-26 16:42:30
M CTAG COMPLD
EN=0 ENDESC=No Error

totalrecord=1

list of Ethenet performance

—————————————————–
OutPkts InPkts OutOctets InOctets CRC UnderSizePkts OverSizePkts InErrors
OutErrors InDiscards OutDiscards InUnicastPkts InMulticastPkts InBroadcastPkts
OutUnicastPkts OutMulticastPkts OutBroadcastPkts StateChangeCounters
1456561 1456584 745757243 745765938 0 0 0 – – 0 0 1450418 6175 10 6176 0
6–
—————————————————–
;
Remark:
This command is used to list ONU LAN port performance.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

7-332

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

l Revision History

Revision Date Notes

【Query PON Link Performance】

7.2.15 LST-PONPERF【 】
l Description

This command is used for querying the number of receiving/transmission packets,

receiving/transmission octets, error frames of the OLT PON port or ONU PON port.
l Applicable NE

NE Category NE Type Notes

PON OLT C300 Series/C300v2 Series/C300v3 Series

PON ONU F820/LAN-MDU Series/xDSL-MDU Series

l Command Format

LST-PONPERF::ONUIP=onu-name|(OLTID=olt-name,PONID=ponport_location
[,ONUIDTYPE=id-type,ONUID=onu-index]):CTAG::[CHANNELID=channel-id];
l Operated Target Identifier

Parameter Type Value Range Description Optional

Name Description

ONUIP String SIZE(128) IP address, name, or

ID of the ONU that
has management IP

OLTID String SIZE(128) OLT IP address, Required for the

name, or ID OLT PON port or
the ONU that has
no management IP

PONID String SIZE(128) To locate a Required for the

Rack–Shelf–Slot– PON port by OLT PON port or
PON Port ID Rack-Shelf-Slot-PON the ONU that has
Port ID. Type NA no management IP
when this parameter
is absent.

ONUIDTYPE String ONU_NAME, ONU identifier Required for the

MAC, type (ONU_NAME, ONU that has no
LOID, MAC, LOID, management IP
ONU_NUMBER ONU_NUMBER)

7-333

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

ONUID String SIZE(128) ONU identifier. Required for the

The value could ONU that has no
be chosen from management IP
ONU_NAME,
MAC, LOID and
ONU_NUMBER to
uniquely identify an
ONU on the PON
port.

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

CHAN- Integer 1-8 Channel ID Optional

NELID

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters

Parameter Name Type Value Range Description

OutPkts Double 0–1.85E19 Number of outgoing packets

InPkts Double 0–1.85E19 Number of incoming packets

OutOctets Double 0–1.85E19 Number of outgoing octets

InOctets Double 0–1.85E19 Number of incoming octets

CRC Double 0–1.85E19 Number of incoming packets

with CRC errors

UnderSizePkts Double 0–1.85E19 Number of incoming undersize

packets

OverSizePkts Double 0–1.85E19 Number of incoming oversize

packets

InErrors Double 0–1.85E19 Number of incoming error

packets

OutErrors Double 0–1.85E19 Number of outgoing error

packets

InDiscards Double 0–1.85E19 Number of incoming packets

that were discarded

OutDiscards Double 0–1.85E19 Number of outgoing packets

that were discarded

7-334

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

InUnicastPkts Double 0–1.85E19 Number of incoming unicast

packets

InMulticastPkts Double 0–1.85E19 Number of incoming multicast

packets

InBroadcastPkts Double 0–1.85E19 Number of incoming broadcast

packets

OutUnicastPkts Double 0–1.85E19 Number of outgoing unicast

packets

OutMulticastPkts Double 0–1.85E19 Number of outgoing multicast

packets

OutBroadcastPkts Double 0–1.85E19 Number of outgoing broadcast

packets

ChannelId Integer 1-8 Channel ID

This response parameter
will be shown only
when the parameter
'port.isSupportComboPon'
in the TL1 configuration file
'an-pon-tl1-param.properties'
is enable.The default value of
this parameter is disable.

l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
No.1 Command :
LST-PONPERF::OLTID=10.63.173.78,PONID=1-1-14-9,ONUIDTYPE=SN,
ONUID=ZTEGC409D896:CTAG::;
Response：
PON001 2014-02-26 16:42:30
M CTAG COMPLD
EN=0 ENDESC=No Error

totalrecord=1

7-335

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

list of pon port performance

—————————————————–
OutPkts InPkts OutOctets InOctets CRC UnderSizePkts OverSizePkts InErrors
OutErrors InDiscards OutDiscards InUnicastPkts InMulticastPkts InBroadcastPkts
OutUnicastPkts OutMulticastPkts OutBroadcastPkts
423786 0 20341728 135500 0 0 0 0 0 0 0 0 0 0 423786 0 0
—————————————————–
;
Remark:
This command is used to list ONU PON port performance.
No.2 Command :
LST-PONPERF::OLTID=10.63.173.78,PONID=1-1-14-9:CTAG::;
Response：
PON001 2014-02-26 16:42:30
M CTAG COMPLD
EN=0 ENDESC=No Error

totalrecord=1

list of pon port performance

—————————————————–
OutPkts InPkts OutOctets InOctets CRC UnderSizePkts OverSizePkts InErrors
OutErrors InDiscards OutDiscards InUnicastPkts InMulticastPkts InBroadcastPkts
OutUnicastPkts OutMulticastPkts OutBroadcastPkts
282027 9659 13537296 0 0 0 0 0 0 0 0 5007 4652 0 0 0 0
—————————————————–
;
Remark:
This command is used to list OLT PON port performance.
No.3 Command :
LST-PONPERF::OLTID=10.63.173.78,PONID=1-1-14-9:CTAG::CHANNELID=1;
Response：
PON001 2016-08-26 16:23:12
M CTAG COMPLD
EN=0 ENDESC=No Error

7-336

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

totalrecord=1

list of pon port performance

—————————————————–
OutPkts InPkts OutOctets InOctets CRC UnderSizePkts OverSizePkts InErrors
OutErrors InDiscards OutDiscards InUnicastPkts InMulticastPkts InBroadcastPkts
OutUnicastPkts OutMulticastPkts OutBroadcastPkts ChannelId
282027 9659 13537296 0 0 0 0 0 0 0 0 5007 4652 0 0 0 0 1
—————————————————–
;
Remark:
This command is used to list the performance of OLT PON port channel 1(supporting
combo PON).
No.4 Command :
LST-PONPERF::OLTID=10.63.173.78,PONID=1-1-14-9:CTAG::;
Response：
PON001 2016-08-26 16:33:14
M CTAG COMPLD
EN=0 ENDESC=No Error

totalrecord=2

list of pon port performance

—————————————————–
OutPkts InPkts OutOctets InOctets CRC UnderSizePkts OverSizePkts InErrors
OutErrors InDiscards OutDiscards InUnicastPkts InMulticastPkts InBroadcastPkts
OutUnicastPkts OutMulticastPkts OutBroadcastPkts ChannelId
282027 9659 13537296 0 0 0 0 0 0 0 0 5007 4652 0 0 0 0 1
34213 213 543543 0 0 0 0 0 0 0 0 234 53 0 0 0 0 2
—————————————————–
;
Remark:
This command is used to list the performance of OLT PON port(supporting combo
PON).

7-337

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.16.20T110 2016-08-30 New Command Parameters: CHANNELID

New Response Parameters: ChannelId

【 Query Unregistered ONU Status

7.2.16 LST-UNREGONU【
】
Information】
l Description

This command is used for querying the status information of the unregistered ONU.
l Applicable NE

NE Category NE Type Notes

PON OLT C300 Series/C300v2 Series/C300v3 Series

l Command Format
LST-UNREGONU::(OLTID=olt-name[,PONID=ponport_location]|ONUID=onu-id):CTAG::;
l Operated Target Identifier

Parameter Type Value Range Description Optional

Name Description

OLTID String SIZE(128) OLT IP address, Required

name, or ID Under Certain
Conditions:Must
choose one among
OLTID, (OLTID,
PONID) and
ONUID

7-338

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

PONID String SIZE(128) To locate a Required

Rack–Shelf–Slot– PON port by Under Certain
PON Port ID Rack-Shelf-Slot-PON Conditions:Must
Port ID. Type NA choose one among
when this parameter OLTID, (OLTID,
is absent. PONID) and
ONUID

ONUID String SIZE(1-128) ONU identifier. Required

The value could Under Certain
be chosen from Conditions:Must
MAC, LOID, SN, RID choose one among
and PASSWORD to OLTID, (OLTID,
identify a single ONU PONID) and
on the PON port. ONUID

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters

Parameter Name Type Value Range Description

MAC String SIZE(1-128) Support for EPON, return “--”

for GPON.

LOID String SIZE(1-64) LOID

PWD String SIZE(1-128) PASSWORD

ERROR String Conflict Support for EPON, return “--”

Unauth for GPON.
PONID String SIZE(1-128) To locate a PON port by
Rack-Shelf-Slot-PON Port ID.
SN String SIZE(1-128) SN

AUTHTIME String SIZE(1-128) Authentication Time

DT String SIZE(1-255) ONU Type

7-339

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

LOIDPWD String SIZE(1-12) ONU LOID Password

This response parameter
will be shown only
when the parameter
'lstunregonu.lstLoidPwdEtc'
in the TL1 configuration file
'an-pon-tl1-param.properties'
is enable.

RID String SIZE(1-36) ONU Register ID

This response parameter
will be shown only
when the parameter
'lstunregonu.lstLoidPwdEtc'
in the TL1 configuration file
'an-pon-tl1-param.properties'
is enable.

SOFTWAREVER- String SIZE(1-14) ONU Software Version

SION This response parameter
will be shown only
when the parameter
'lstunregonu.lstLoidPwdEtc'
in the TL1 configuration file
'an-pon-tl1-param.properties'
is enable.

CHANNELID Integer 1-8 Channel ID

This response parameter
will be shown only
when the parameter
'lstunregonu.lstLoidPwdEtc'
in the TL1 configuration file
'an-pon-tl1-param.properties'
is enable.

7-340

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

DEVNAME Octet String SIZE(1-128) NE Name

This response parameter
will be shown only when the
operated target identifier is
ONUID.

DEVIP String SIZE(1-128) NE IP

This response parameter
will be shown only when the
operated target identifier is
ONUID.

l Error Code
DDOF, EEEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
：
Command 1：
LST-UNREGONU::OLTID=10.63.196.165:CTAG::;
Response：
ZTE_10.63.204.161 2013-10-31 16:05:24
M CTAG COMPLD
total_blocks=1
block_number=1
block_records=2
List of unreg onu information
—————————————————–
MAC LOID PWD ERROR PONID SN AUTHTIME DT
08-18-1A-D7-1A-F8 08181AD71AF8 123456 Unauth 1-1-4-4 – 2013/10/30 11:23:31
ZTE-F420
38-46-08-29-12-3A 38460829123A ztepon Unauth 1-1-4-4 – 2013/10/31 15:48:44
ZTE-F460

7-341

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

—————————————————–
;
Remark：
This command is used to query the unregistered ONU from OLT.
：
Command 2：
LST-UNREGONU::OLTID=10.63.196.165,PONID=1-1-4-4:CTAG::;
Response：
ZTE_10.63.204.161 2013-10-31 16:06:03
M CTAG COMPLD
total_blocks=1
block_number=1
block_records=1
List of unreg onu information
—————————————————–
MAC LOID PWD ERROR PONID SN AUTHTIME DT
08-18-1A-D7-1A-F8 08181AD71AF8 123456 Unauth 1-1-4-4 – 2013/10/30 11:23:31
ZTE-F420
—————————————————–
;
Remark：
This command is used to query the unregistered ONU of Rack1/Shelf1/Slot4/Port4 on
10.63.196.165.
：
Command 3：
LST-UNREGONU::OLTID=10.63.204.232,PONID=1-1-4-1:CTAG::;
Response：
ZTE_10.63.204.161 2016-09-11 16:16:23
M CTAG COMPLD
total_blocks=1
block_number=1
block_records=1
List of unreg onu information
—————————————————–
MAC LOID PWD ERROR PONID SN AUTHTIME DT LOIDPWD RID
SOFTWAREVERSION CHANNELID

7-342

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

– 08181AD71AF8 123456 Unauth 1-1-4-1 test 2016/09/10 11:23:31 ZTE-F420

123123 – v13 1
—————————————————–
;
Remark：
This command is used to query the unregistered ONU of Rack1/Shelf1/Slot4/Port4 on
10.63.204.232(supporting LOIDPWD and etc.).
Command 4:
LST-UNREGONU::ONUID=08181AD71AF8:CTAG::;
Response：
ZTE_10.63.204.161 2016-10-17 16:05:24
M CTAG COMPLD
total_blocks=1
block_number=1
block_records=2
List of unreg onu information
—————————————————–
MAC LOID PWD ERROR PONID SN AUTHTIME DT DEVNAME DEVIP
08-18-1A-D7-1A-F8 08181AD71AF8 123456 Unauth 1-1-4-4 – 2013/10/30 11:23:31
ZTE-F420
C300v2DEV 10.63.204.233
—————————————————–
;
Remark：
This command is used to query the unregistered ONU by ONUID.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

7-343

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

NetNumenU31R20V12.16.20T110 2016-09-12 New Response Parameters: LOIDPWD,

RID,
SOFTWAREVERSION, CHANNELID

NetNumenU31R20V12.16.20T110 2016-10-17 New Command Parameters: ONUID

New Response Parameters: DEVNAME,
DEVIP
Support querying unregistered ONU by
ONUID

【Query ONU Service Configuration】

7.2.17 LST-ONU-SERVICE【 】
l Description
This command is used to query ONU service configuration.

l Applicable NE

NE Category NE Type Notes

PON OLT C300v2 Series/C300v3 Series

l Command Format
LST-ONU-SERVICE::(DID=device-id|DNAME=device-name)[,PID=port-id][,OID=onu-id]
:CTAG::[ONUPROFILENAME=onu-profile-name];
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

port

7-344

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU Under Certain
MacAddress while DID or DNAME Conditions:Must
SN/LOID/Pass- indicates the OLT choose one
word device. between OID and
(e.g. 1-1-1-2-1 ONUPROFILENAME
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter

Parameter Value Range Description Optional

Name Type Description

ONUPRO- String SIZE(1-64) ONU Profile NAME Required Under Cer-

FILENAME tain Conditions:Must
choose one between
OID and ONUPRO-
FILENAME

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
Title of Response Result: List of ONU Service information

Parameter Name Type Value Range Description

DID String SIZE(1-100) NE ID

DNAME String SIZE(1-32) NE Name

OID String rack-shelf-slot-port-onu ONU ID

-- means not supported

SERVICENAME String SIZE(1-64) Service Name

ONUGEMPOR- Integer 1-255 ONU GEM Port ID

TID

MAPPINGTYPE String VLAN Mapping Type

CoS
CoSAndVLAN
Transparent
Untag

COS String SIZE(1-32) CoS Priority(0-7).

CoS1/CoS2/CoS4-CoS6/...
（e.g. 1/4/6 1/3-5/7)

7-345

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

VID String SIZE(1-255) VLAN ID(1–4094).

VID1/VID2/VID3-VID9/...
（ e.g. 100/105/106
100/102-105/120)

l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
LST-ONU-SREVICE::DID=10.63.173.78,OID=1-1-2-1-1:CTAG::;
Response：
SH10083644D02 2015-06-09 14:19:37
M CTAG COMPLD
EN=0 ENDESC=No Error

totalrecord=3

List of ONU Service information

—————————————————–
DID DNAME OID SERVICENAME ONUGEMPORTID MAPPINGTYPE COS VID
10.63.173.78 MT-OLT 1-1-2-1-1 service1 1 VLAN – 100/102-109/112
10.63.173.78 MT-OLT 1-1-2-1-1 service2 2 CoS 1/3-6/7 –
10.63.173.78 MT-OLT 1-1-2-1-1 service3 3 CoS 2/5 –
—————————————————–
;
Remark:
This command is used to query ONU service configuration of
Rack1/Shelf1/Slot2/Port1/ONU1 on 10.63.173.78.
Command 2:
LST-ONU-SREVICE::DID=10.63.173.78:CTAG::ONUPROFILENAME=remote-profile;
Response：
SH10083644D02 2017-07-19 14:19:37
M CTAG COMPLD
EN=0 ENDESC=No Error

7-346

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

totalrecord=3

List of ONU Service information

—————————————————–
DID DNAME OID SERVICENAME ONUGEMPORTID MAPPINGTYPE COS VID
10.63.173.78 MT-OLT – service1 1 VLAN – 100/102-109/112
10.63.173.78 MT-OLT – service2 2 CoS 1/3-6/7 –
10.63.173.78 MT-OLT – service3 3 CoS 2/5 –
—————————————————–
;
Remark:
This command is used to query ONU service configuration of ONU profile
remote-profile on NE 10.63.173.78.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.15.20T90 2015-6-09 New TL1 Command

NetNumenU31R20V12.17.20T120 2017-7-19 New Command
Parameters ：
ONUPROFILENAME

【 Query ONU Video ANI

7.2.18 LST-ONU-VIDEOANI【
】
Configuration】
l Description
This command is used to query ONU video ANI configuration.

7-347

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

l Applicable NE

NE Category NE Type Notes

PON OLT C220v1.2/C300 Series/C300v2 Series/C300v3 Series

l Command Format
LST-ONU-VIDEOANI::(DID=device-id|DNAME=device-name)[,PID=port-id],OID=onu-id
:CTAG::;
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

port

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU
MacAddress while DID or DNAME
SN/LOID/Pass- indicates the OLT
word device.
(e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter
None
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
Title of Response Result: List of ONU video ANI information

Parameter Name Type Value Range Description

7-348

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

DID String SIZE(1-100) NE ID

DNAME String SIZE(1-32) NE Name

OID String rack-shelf-slot-port-onu ONU ID

ADMINSTAT String Enable Administrative Status

Disable

OPERSTAT String Online Operational Status

Offline

ARC String Enable Alarm Reporting Control

Disable

Alarm Reporting Control Interval

ARCINTERVAL Integer 0-255 (min)

LOWER- String None Lower Frequency Range (MHz)

FREQUEN- From50to550
CYRANGE From50to750
From50to870

HIGHER- String None Higher Frequency Range (MHz)

FREQUEN- From550to750
CYRANGE From550to870
From950to2050
From2150to3250
From950to3250

SIGNALCAPA- String NoCapability Signal Capability

BILITY Total
Fixed
TotalAndFixed
Variable
TotalAndVariable
Broadband
TotalAndBroadband

OPTICALSIG- Integer 0-65535 Optical Signal Level (dBm)

NALLEVEL

PILOTSIGNAL- Integer -32768–32767 Pilot Signal Level (dBuV)

LEVEL

MINIMUMSIG- Integer -32768–32767 Minimum Signal Level (dBm)

NALLEVEL

MAXIMUMSIG- Integer -32768–32767 Maximum Signal Level (dBm)

NALLEVEL

PILOTFRE- Double 0-4294967295 Pilot Frequency (Hz)

QUENCY

7-349

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

AGCMODE String None AGC Mode

Broadband
Optical

AGC Integer -128–127 AGC (0.1dB)

LOWEROPTI- Integer -120–60 Lower Optical Threshold

CALTHRESH- (0.1dBm)
OLD

UPPEROPTI- Integer -120–60 Upper Optical Threshold

CALTHRESH- (0.1dBm)
OLD

l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.

l Example
Command:
LST-ONU-VIDEOANI::DID=10.63.173.78,OID=1-1-2-1-1:CTAG::;
Response：
SH10083644D02 2015-01-15 14:19:37
M CTAG COMPLD
EN=0 ENDESC=No Error

totalrecord=1

List of ONU video ANI information

—————————————————–

DID DNAME OID ADMINSTAT OPERSTAT ARC ARCINTERVAL

LOWERFREQUENCYRANGE HIGHERFREQUENCYRANGE SIGNALCAPABILITY
OPTICALSIGNALLEVEL PILOTSIGNALLEVEL MINIMUMSIGNALLEVEL
MAXIMUMSIGNALLEVEL PILOTFREQUENCY AGCMODE AGC
LOWEROPTICALTHRESHOLD UPPEROPTICALTHRESHOLD

10.63.173.78 MT-OLT 1-1-2-1-1 Enable Online Enable 10 From50to550

From550to750 Total 20 15 -30 -30 500 Optical 20 -95 25
—————————————————–

;
Remark:

7-350

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

This command is used to query video ANI configuration of

Rack1/Shelf1/Slot2/Port1/ONU1 on 10.63.173.78.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.15.20T85 2015-01-19 New TL1 Command

【 Query ONU VLAN

7.2.19 LST-ONU-VLANTRANSLATION【
】
Translation】
l Description
This command is used to query ONU VLAN translation configuration information.
l Applicable NE

NE Category NE Type Notes

PON OLT C220v1.2/C300 Series/C300v2 Series/C300v3 Series

MSAN C300Mv4 Series

l Command Format

LST-ONU-VLANTRANSLATION::(DID=device-id|DNAME=device-name)[,PID=port-id],OID=onu-i
[,ONUPORT=onu-port]:CTAG::[PORTTYPE=port-type];
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

7-351

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

port

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU
MacAddress while DID or DNAME
SN/LOID/Pass- indicates the OLT
word device.
(e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

ONUPORT String [rack-][shelf-][sl- UNI Port of ONU Optional

ot-]port (e.g. 3-2: slot3-port2 It must require
If no slot, 2: port2 PORTTYPE when
1-1-3-2: rack1-shelf1- selects ONUPORT.
slot3-port2)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

PORTTYPE String Ethernet UNI Port Type Optional

MulticastGEMPort
UnicastGEMPort
WiFi
VEIP
WAN

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.

l Response Parameters
Title of Response Result: List of ONU VLAN translation information

Parameter Name Type Value Range Description

DID String SIZE(1-100) NE ID

DNAME String SIZE(1-32) NE Name

OID String rack-shelf-slot-port-onu ONU ID

7-352

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

PORTTYPE String Ethernet UNI Port Type

MulticastGEMPort
UnicastGEMPort
WiFi
VEIP
WAN
ONUPORT String [rack-][shelf-][slot-]port UNI Port of ONU
(e.g. 3-2: slot3-port2
If no slot, 2: port2
1-1-3-2: rack1-shelf1-slot3-
port2)

USERVID Integer 1-4094 User VLAN ID

USERCOS Integer 0-8 User CoS Priority

Value 8 indicates no
configuration

CVID Integer 0-4094 CVLAN ID

Value 0 indicates no
configuration

CTAGCOS Integer 0-8 CVLAN CoS Priority

Value 8 indicates no
configuration

SVID Integer 0-4094 SVLAN ID

Value 0 indicates no
configuration

STAGCOS Integer 0-8 SVLAN CoS Priority

Value 8 indicates copying priority
from inner VLAN priority

l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
LST-ONU-VLANTRANSLATION::DID=10.63.173.78,OID=1-1-2-1-1:CTAG::PORTTYPE=Ethernet
Response：
SH10083644D02 2015-03-19 14:19:37
M CTAG COMPLD
EN=0 ENDESC=No Error

7-353

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

totalrecord=3

List of ONU VLAN translation information

————————————————————–
DID DNAME OID PORTTYPE ONUPORT USERVID USERCOS CVID CTAGCOS
SVID STAGCOS
10.63.173.78 OLT-M Ethernet 1-1-2-1-1 1 100 0 200 0 0 0
10.63.173.78 OLT-M Ethernet 1-1-2-1-1 1 110 0 220 0 0 0
10.63.173.78 OLT-M Ethernet 1-1-2-1-2 1 100 0 0 8 200 8
————————————————————–
;
Remark:
This command is used to query ONU VLAN translation configuration information of
Rack1/Shelf1/Slot2/Port1/ONU1/Ethernet on 10.63.173.78.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.16.20T100 2016-01-11 New TL1 Command

【Query ONU VPort Configuration】

7.2.20 LST-ONU-VPORT【 】
l Description
This command is used to query ONU VPort configuration.
l Applicable NE

NE Category NE Type Notes

PON OLT C300v2 Series/C300v3 Series

l Command Format
LST-ONU-VPORT::(DID=device-id|DNAME=device-name)[,PID=port-id],OID=onu-id

7-354

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

:CTAG::;
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

port

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU
MacAddress while DID or DNAME
SN/LOID/Pass- indicates the OLT
word device.
(e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter
None
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
Title of Response Result: List of ONU VPort information

Parameter Name Type Value Range Description

DID String SIZE(1-100) NE ID

DNAME String SIZE(1-32) NE Name

OID String rack-shelf-slot-port-onu ONU ID

VPORTID Integer 1-256 VPort ID

VPORTNAME String SIZE(1-128) VPort Name

7-355

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

MAPPINGTYPE String VLAN Mapping Type

CoS
CoSAndVLAN
OneToOne

l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command:
LST-ONU-VPORT::DID=10.63.173.78,OID=1-1-2-1-1:CTAG::;
Response：
SH10083644D02 2015-06-09 14:19:37
M CTAG COMPLD
EN=0 ENDESC=No Error

totalrecord=3

List of ONU VPort information

—————————————————–
DID DNAME OID VPORTID VPORTNAME MAPPINGTYPE
10.63.173.78 MT-OLT 1-1-2-1-1 1 vport1 VLAN
10.63.173.78 MT-OLT 1-1-2-1-1 2 – CoS
10.63.173.78 MT-OLT 1-1-2-1-1 3 vport3 CoS
—————————————————–
;
Remark:
This command is used to query VPort configuration of
Rack1/Shelf1/Slot2/Port1/ONU1 on 10.63.173.78.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

7-356

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

l Revision History

Revision Date Notes

NetNumenU31R20V12.15.20T90 2015-06-09 New TL1 Command

【Query ONU VPort

7.2.21 LST-ONU-VPORTGEMPORTMAPPING【
】
and GEM Port Mapping】
l Description
This command is used to query ONU VPort and GEM port Mapping.
l Applicable NE

NE Category NE Type Notes

PON OLT C300v2 Series/C300v3 Series

l Command Format

LST-ONU-VPORTGEMPORTMAPPING::(DID=device-id|DNAME=device-name)[,PID=port-id],
OID=onu-id:CTAG::;
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

port

7-357

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU
MacAddress while DID or DNAME
SN/LOID/Pass- indicates the OLT
word device.
(e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter
None
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
Title of Response Result: List of ONU VPort and GEM port mapping information

Parameter Name Type Value Range Description

DID String SIZE(1-100) NE ID

DNAME String SIZE(1-32) NE Name

OID String rack-shelf-slot-port-onu ONU ID

VPORTID Integer 1-256 VPort ID

ONUGEMPOR- Integer 1-255 ONU GEM Port ID

TID

CoS Integer 0-7 CoS

VID Integer 1-4094 VLAN ID

l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command:
LST-ONU-VPORTGEMPORTMAPPING::DID=10.63.173.78,OID=1-1-2-1-1:CTAG::;
Response：
SH10083644D02 2015-06-09 14:19:37
M CTAG COMPLD
EN=0 ENDESC=No Error

7-358

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

totalrecord=3

List of ONU VPort and GEM port mapping information

—————————————————–
DID DNAME OID VPORTID ONUGEMPORTID COS VID
10.63.173.78 MT-OLT 1-1-2-1-1 1 1 – –
10.63.173.78 MT-OLT 1-1-2-1-1 2 2 6 –
10.63.173.78 MT-OLT 1-1-2-1-1 3 4 2 1066
—————————————————–
;
Remark:
This command is used to query VPort and GEM port mapping of
Rack1/Shelf1/Slot2/Port1/ONU1 on 10.63.173.78.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.15.20T90 2015-06-10 New TL1 Command

【Query ONU GEM Port Configuration】

7.2.22 LST-ONUGEMPORT【 】
l Description
This command is used to query ONU GEM Port configuration.
l Applicable NE

NE Category NE Type Notes

PON OLT C220v1.2/C300 Series/C300v2 Series/C300v3 Series

l Command Format
LST-ONUGEMPORT::(DID=device-id|DNAME=device-name)[,PID=port-id][,OID=onu-id]
:CTAG::[ONUPROFILENAME=onu-profile-name];

7-359

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(0-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(0-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

port

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU Under Certain
MacAddress while DID or DNAME Conditions:Must
SN/LOID/Pass- indicates the OLT choose one
word device. between OID and
(e.g. 1-1-1-2-1 ONUPROFILENAME
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

ONUPRO- String SIZE(1-64) ONU Profile NAME Required

FILENAME Under Certain
Conditions:Must
choose one
between OID and
ONUPROFILENAME

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
Title of Response Result: List of ONU GEM Port information

Parameter Name Type Value Range Description

DID String SIZE(0-100) NE ID

7-360

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

DNAME String SIZE(0-32) NE Name

OID String rack-shelf-slot-port-onu ONU ID

-- means not supported

ONUGEMPOR- Integer 1-255 GEM Port ID in ONU

TID

GEMPORTID Integer 129-4094 Port ID of GEM Port

GEMPORT- String SIZE(0-64) GEM Port Name

NAME

ONUTCONTID Integer 1-255 TCONT ID in ONU

USTRAF- String SIZE(0-64) Upstream Traffic Profile Name

FICPROFILE

DSTRAF- String SIZE(0-64) Downstream Traffic Profile

FICPROFILE Name

ENCRYPTMODE String DownstreamAES Encryption Mode

DisableAES
BidirectionAES

l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
LST-ONUGEMPORT::DID=10.63.173.78,OID=1-1-2-1-1:CTAG::;
Response：
SH10083644D02 2014-03-19 14:19:37
M CTAG COMPLD
EN=0 ENDESC=No Error

totalrecord=2

List of ONU GEM Port information

—————————————————–
DID DNAME OID ONUGEMPORTID GEMPORTID GEMPORTNAME
ONUTCONTID USTRAFFICPROFILE DSTRAFFICPROFILE ENCRYPTMODE
10.63.173.78 MT-OLT 1-1-2-1-1 1 1 HSI 1 T1-10M FULL DisableAES
10.63.173.78 MT-OLT 1-1-2-1-1 2 2 VoIP 2 T1-5M FULL DisableAES

7-361

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

—————————————————–
;
Remark:
This command is used to query GEM Port configuration of
Rack1/Shelf1/Slot2/Port1/ONU1 on 10.63.173.78.
Command 2:
LST-ONUGEMPORT::DID=10.63.173.78:CTAG::ONUPROFILENAME=line-profile;
Response：
SH10083644D02 2017-07-19 14:19:37
M CTAG COMPLD
EN=0 ENDESC=No Error

totalrecord=2

List of ONU GEM Port information

—————————————————–
DID DNAME OID ONUGEMPORTID GEMPORTID GEMPORTNAME
ONUTCONTID USTRAFFICPROFILE DSTRAFFICPROFILE ENCRYPTMODE
10.63.173.78 MT-OLT – 1 1 HSI 1 T1-10M FULL DisableAES
10.63.173.78 MT-OLT – 2 2 VoIP 2 T1-5M FULL DisableAES
—————————————————–
;
Remark:
This command is used to query GEM Port configuration of ONU profile line-profile on
NE 10.63.173.78.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

7-362

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

NetNumenU31R20V12.13.40T70 2014-3-20 New TL1 Command

NetNumenU31R20V12.17.20T120 2017-7-19 New Command
Parameters ：
ONUPROFILENAME

【Query the Information of ONU SIP

7.2.23 LST-ONU-SIPUSER【
】
User】
l Description
This command is used for querying the information of ONU SIP user.
l Applicable NE

NE Category NE Type Notes

PON OLT C300 Series/C300v2 Series/C300v3 Series

MSAN C300Mv4 Series

l Command Format
LST-ONU-SIPUSER::(DID=device-id|DNAME=device-name)[,PID=port-id],OID=onu-id
[,ONUPORT=onu-port]:CTAG::;
l Operated Target Identifier

Parameter Type Value Range Description Optional

Name Description

DID String SIZE(1-100) NE ID Required Under

Certain Conditions:
Must choose one
between DID and
DNAME

DNAME String SIZE(1-32) NE Name Required Under

Certain Conditions:
Must choose one
between DID and
DNAME

7-363

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

PID String rack-shelf-slot-port Port ID (e.g. 1-1-5-2) Optional

OID String rack-shelf-slotport- ONU ID. It's used Required

onu MacAddress to identify the
SN/LOID/Password ONU while DID or
DNAME indicates
the OLT device.
(e.g.1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

ONUPORT String [rack-][shelf-][slot-]p- UNI Port of ONU Optional

ort (e.g. 3-2: slot3-
port2 If no slot, 2:
port2 1-1-3-2: rack1-
shelf1-slot3-port2)

l Response Format

Refer to Section 4.2.2.2 for detailed TL1 command response format.

l Response Parameters
Title of Response Result: List of ONU SIP user information

Parameter Name Type Value Range Description

ONUPORT String [rack-][shelf-][slot-]port UNI Port of ONU (e.g.

3-2: slot3- port2 If no slot,
2: port2 1-1-3-2: rack1-
shelf1-slot3-port2)

SIPPROFILENAME String SIZE(1-64) SIP Profile Name

USERID String SIZE(1-128) User ID

DISPLAYNAME String SIZE(1-25) Display Name

("--" means unconfigured or
unsupported)

USERNAME String SIZE(1-50) User Name

("--" means unconfigured or
unsupported)

7-364

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

SIGNALCODE String LoopStart Signal Code

GroundStart
LoopReverseBattery
CoinFirst
DialToneFirst
Multiparty

MEDIAPFOFILE String SIZE(1-64) Media Profile

("--" means unconfigured or
unsupported)

AGENTID Integer 1-255 Agent ID

("--" means unconfigured or
unsupported)

AGENTSTAT String Initial Agent Status

Connected
IcmpError
MalformedRsp
InadequateInfoRsp
Timeout
Redundant
None

VOICEMAILURI String SIZE(1-128) Voice Mail URI

("--" means unconfigured or
unsupported)

7-365

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

VOICEMAILVALI- String Disabled Voice Mail Validation

DATION MD5
Basic

VOICEMAILUSER- String SIZE(1-50) Voice Mail User Name

NAME ("--" means unconfigured or
unsupported)

VOICEMAILREALM String SIZE(1-25) Voice Mail Realm

("--" means unconfigured or
unsupported)

VOICEMAILSUB- Integer 0-2147483647 Voice Mail Subscription

SEXPTIME Expiration Time(s)

l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
：
Command 1：
LST-ONU-SIPUSER::DID=10.63.196.165,OID=1-1-4-4-1:CTAG::;
Response：
SH10083644D02 2016-09-18 10:16:37
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=2
List of ONU SIP user information
—————————————————–
ONUPORT SIPPROFILENAME USERID DISPLAYNAME USERNAME
SIGNALCODE MEDIAPFOFILE AGENTID AGENTSTAT VOICEMAILURI
VOICEMAILVALIDATION VOICEMAILUSERNAME VOICEMAILREALM
VOICEMAILSUBSEXPTIME
1 sip1 111 test1 t1 LoopStart media1 1 Connected mail.zte.com.cn Basic
mail1 – 3600
2 sip2 222 test2 t2 GroundStart media2 2 Connected mail.zte.com.cn MD5

7-366

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

mail2 zte.com.cn 3600

—————————————————–
;
Remark：
This command is used to query ONU SIP user information of
Rack1/Shelf1/Slot4/Port4/ONU1 on 10.63.196.165.
：
Command 2：
LST-ONU-SIPUSER::DID=10.63.196.165,OID=1-1-4-4-1,ONUPORT=1:CTAG::;
Response：
SH10083644D02 2016-09-18 10:18:14
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=1
List of ONU SIP user information
—————————————————–
ONUPORT SIPPROFILENAME USERID DISPLAYNAME USERNAME
SIGNALCODE MEDIAPFOFILE AGENTID AGENTSTAT VOICEMAILURI
VOICEMAILVALIDATION VOICEMAILUSERNAME VOICEMAILREALM
VOICEMAILSUBSEXPTIME
1 sip1 111 test1 t1 LoopStart media1 1 Connected mail.zte.com.cn Basic
mail1 – 3600
—————————————————–
;
Remark：
This command is used to query ONU SIP user information of
Rack1/Shelf1/Slot4/Port4/ONU1/ONU Port1 on 10.63.196.165.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

7-367

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

Revision Date Notes

NetNumenU31R20V12.16.20T110 2016-09-18 New TL1 Command

【Query ONU Port VLAN】

7.2.24 LST-ONUPORT-VLAN【 】
l Description
This command is used to query ONU port VLAN information.

l Applicable NE

NE Category NE Type Notes

PON OLT C300v2 Series/C300v3 Series

l Command Format
LST-ONUPORT-VLAN::(DID=device-id|DNAME=device-name)
[,[PID=port-id,]OID=onu-id[,ONUPORT=onu-port]]:CTAG::
[ONUPROFILENAME=onu-profile-name][,PORTTYPE=port-type];
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

port

7-368

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

OID String rack-shelf-slot- ONU ID. It's used Required Under

port-onu to identify the ONU Certain
MacAddress while DID or DNAME Conditions:Must
SN/LOID/Pass- indicates the OLT choose one
word device. between OID and
(e.g. 1-1-1-2-1 ONUPROFILENAME
00-18-FE-7C-64-E4
ZTEG54998768)

ONUPORT String [rack-][shelf-][sl- UNI Port of ONU Optional

ot-]port (e.g. 3-2: slot3-port2
If no slot, 2: port2
1-1-3-2: rack1-shelf1-
slot3-port2)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

ONUPRO- String SIZE(1-64) ONU Profile Name Required Under

FILENAME Certain
Conditions:Must
choose one
between OID and
ONUPROFILENAME

PORTTYPE String Ethernet UNI Port Type Optional

MulticastGEMPort If not input, the default
UnicastGEMPort UNI type is Ethernet.
WiFi
VEIP
IPHost

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.

l Response Parameters
Title of Response Result: List of ONU port VLAN information

Parameter Type Value Range Description

Name

DID String SIZE(1-100) NE ID

DNAME String SIZE(1-32) NE Name

OID String rack-shelf-slot-port-onu ONU ID

7-369

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

ONUPORT String [rack-][shelf-][slot-]port UNI Port of ONU

PORTTYPE String Ethernet UNI Port Type

MulticastGEMPort
UnicastGEMPort
WiFi
VEIP
WAN
VLANMODE String Tag VLAN Mode
Trunk
Hybrid
Transparent
None

PVID Integer 1-4094 PVID

COS Integer 0-7 CoS

TAGGEDVLAN String SIZE(1-100) Tagged VLAN List (e.g.

23/25-27/30)

l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
LST-ONUPORT-VLAN::DID=10.63.173.78,OID=1-1-2-1-1:CTAG::;
Response：
SH10083644D02 2015-06-09 14:19:37
M CTAG COMPLD
EN=0 ENDESC=No Error

totalrecord=4

List of ONU port VLAN information

—————————————————–
DID DNAME OID ONUPORT PORTTYPE VLANMODE PVID COS TAGGEDVLAN
10.63.173.78 MT-OLT 1-1-2-1-1 1 Ethernet None 1 0 –
10.63.173.78 MT-OLT 1-1-2-1-1 2 Ethernet Hybrid 101 4 23/25/28

7-370

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

10.63.173.78 MT-OLT 1-1-2-1-1 1 MulticastGEMPort None 1 0 –

10.63.173.78 MT-OLT 1-1-2-1-1 1 WiFi None 1 0 –
—————————————————–
;
Remark:
This command is used to query UNI port VLAN information of
Rack1/Shelf1/Slot2/Port1/ONU1 on 10.63.173.78.
Command 2:
LST-ONUPORT-VLAN::DID=10.63.173.78:CTAG::ONUPROFILENAME=remote-profile;
Response：
SH10083644D02 2017-08-01 11:19:37
M CTAG COMPLD
EN=0 ENDESC=No Error

totalrecord=4

List of ONU port VLAN information

—————————————————–
DID DNAME OID ONUPORT PORTTYPE VLANMODE PVID COS TAGGEDVLAN
10.63.173.78 MT-OLT – 1 Ethernet None 1 0 –
10.63.173.78 MT-OLT – 2 Ethernet Hybrid 101 4 23/25/28
10.63.173.78 MT-OLT – 1 MulticastGEMPort None 1 0 –
10.63.173.78 MT-OLT – 1 WiFi None 1 0 –
—————————————————–
;
Remark:
This command is used to query UNI port VLAN information of ONU profile
remote-profile on 10.63.173.78.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

7-371

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

l Revision History

Revision Date Notes

NetNumenU31R20V12.15.20T90 2015-06-16 New TL1 Command

NetNumenU31R20V12.17.20T120 2017-08-01 New Command
Parameters ：
ONUPROFILENAME

【Query ONU Extended VLAN

7.2.25 LST-ONU-EXTENDEDVLAN【
】
Configuration】
l Description
This command is used to query ONU extended VLAN configuration.
l Applicable NE

NE Category NE Type Notes

PON OLT C300 Series/C300v2 Series/C300v3 Series

MSAN C300Mv4 Series

l Command Format
LST-ONU-EXTENDEDVLAN::(DID=device-id|DNAME=device-name)[,PID=port-id],OID=onu-id
[,ONUPORT=onu-port]:CTAG::[PORTTYPE=port-type];
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

7-372

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

port

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU
MacAddress while DID or DNAME
SN/LOID/Pass- indicates the OLT
word device.
(e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

ONUPORT String [rack-][shelf-][sl- UNI Port of ONU Optional

ot-]port (e.g. 3-2: slot3-port2 If not input, all extended
If no slot, 2: port2 VLAN information of
1-1-3-2: rack1-shelf1- ONU will be listed.
slot3-port2)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

PORTTYPE String Ethernet UNI Port Type Optional

WiFi If not input, the default
VEIP UNI type is Ethernet.
IPHost

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
Title of Response Result: List of ONU extended VLAN information

Parameter Name Type Value Range Description

DID String SIZE(1-100) NE ID

DNAME String SIZE(1-32) NE Name

OID String rack-shelf-slot-port-onu ONU ID

7-373

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

PORTTYPE String Ethernet UNI Port Type

WiFi
VEIP
IPHost

ONUPORT String [rack-][shelf-][slot-]port UNI Port of ONU

INPUTTPID Integer 0-65535 Input TPID

OUTPUTTPID Integer 0-65535 Output TPID

DSMODE String InverseUpstream Downstream Mode

Transparent
InverseVlanAndPriOthersForward
InverseVlanOthersForward
InversePriOthersForward
InverseVlanAndPriOthersDiscard
InverseVlanOthersDiscard
InversePriOthersDiscard
Discard

DSCP2COSPR- String SIZE(1-64) DSCP Mapping CoS

OFILENAME Profile

l Error Code

DDOF, IIPE, EEH

Refer to Chapter 5 Unified Error Code Definition for more details.

l Example

Command 1:
LST-ONU-EXTENDEDVLAN::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::;

7-374

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

Response：
SH10083644D02 2016-11-28 14:19:37
M CTAG COMPLD
EN=0 ENDESC=No Error

totalrecord=2

List of ONU extended VLAN information

—————————————————–
DID DNAME OID PORTTYPE ONUPORT INPUTTPID OUTPUTTPID DSMODE
DSCP2COSPROFILENAME
10.63.204.51 MT-OLT 1-1-5-7-1 Ethernet 1 33024 33024 InverseUpstream
DSCPtoCoSProfile
10.63.204.51 MT-OLT 1-1-5-7-1 Ethernet 2 33024 33024 InverseUpstream
DSCPtoCoSProfile
—————————————————–
;
Remark:
This command is used to query extended VLAN configuration of
Rack1/Shelf1/Slot5/Port7/ONU1 on 10.63.204.51.
Command 2:
LST-ONU-EXTENDEDVLAN::DID=10.63.204.51,OID=1-1-5-7-1,ONUPORT=1:CTAG::;
Response：
SH10083644D02 2016-11-28 14:19:37
M CTAG COMPLD
EN=0 ENDESC=No Error

totalrecord=1

List of ONU extended VLAN information

—————————————————–
DID DNAME OID PORTTYPE ONUPORT INPUTTPID OUTPUTPID DSMODE
DSCP2COSPROFILENAME
10.63.204.51 MT-OLT 1-1-5-7-1 Ethernet 1 33024 33024 InverseUpstream
DSCPtoCoSProfile

7-375

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

—————————————————–
;
Remark:
This command is used to query extended VLAN configuration of
Rack1/Shelf1/Slot5/Port7/ONU1/Ethernet port 1 on 10.63.204.51.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.17.20T115 2016-12-6 New TL1 Command

【Query ONU Extended

7.2.26 LST-ONU-EXTENDEDVLANRULE【
】
VLAN Rule Configuration】
l Description

This command is used to query ONU extended VLAN rule configuration.

l Applicable NE

NE Category NE Type Notes

PON OLT C300 Series/C300v2 Series/C300v3 Series

MSAN C300Mv4 Series

l Command Format

LST-ONU-EXTENDEDVLANRULE::(DID=device-id|DNAME=device-name)[,PID=port-id],OID=
onu-id[,ONUPORT=onu-port]:CTAG::[PORTTYPE=port-type];

l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

7-376

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

port

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU
MacAddress while DID or DNAME
SN/LOID/Pass- indicates the OLT
word device.
(e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

ONUPORT String [rack-][shelf-][sl- UNI Port of ONU Optional

ot-]port (e.g. 3-2: slot3-port2 If not input, all
If no slot, 2: port2 extended VLAN rule
1-1-3-2: rack1-shelf1- information of ONU will
slot3-port2) be listed.

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

PORTTYPE String Ethernet UNI Port Type Optional

WiFi If not input, the default
VEIP UNI type is Ethernet.
IPHost

l Response Format

Refer to Section 4.2.2.2 for detailed TL1 command response format.

l Response Parameters

Title of Response Result: List of ONU extended VLAN rule information

7-377

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

Parameter Type Value Range Description

Name

DID String SIZE(1-100) NE ID

DNAME String SIZE(1-32) NE Name

OID String rack-shelf-slot-port-onu ONU ID

PORTTYPE String Ethernet UNI Port Type

WiFi
VEIP
IPHost

ONUPORT String [rack-][shelf-][slot-]port UNI Port of ONU

FILTERRULE- String SIZE(1-64) Filter Rule Name

NAME

TREATMEN- String SIZE(1-64) Treatment Rule Name

TRULENAME

l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:

LST-ONU-EXTENDEDVLANRULE::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::;
Response：

SH10083644D02 2016-11-28 14:19:37

M CTAG COMPLD

EN=0 ENDESC=No Error

totalrecord=2

List of ONU extended VLAN rule information

7-378

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

—————————————————–
DID DNAME OID PORTTYPE ONUPORT FILTERRULENAME
TREATMENTRULENAME
10.63.204.51 MT-OLT 1-1-5-7-1 Ethernet 1 filterRule treatmentRule
10.63.204.51 MT-OLT 1-1-5-7-1 Ethernet 2 filterRule treatmentRule
—————————————————–
;
Remark:
This command is used to query extended VLAN rule configuration of
Rack1/Shelf1/Slot5/Port7/ONU1 on 10.63.204.51.
Command 2:
LST-ONU-EXTENDEDVLANRULE::DID=10.63.204.51,OID=1-1-5-7-1,ONUPORT=1:CTAG::;
Response：
SH10083644D02 2016-11-28 14:19:37
M CTAG COMPLD
EN=0 ENDESC=No Error

totalrecord=1

List of ONU extended VLAN information

—————————————————–
DID DNAME OID PORTTYPE ONUPORT FILTERRULENAME
TREATMENTRULENAME
10.63.204.51 MT-OLT 1-1-5-7-1 Ethernet 1 filterRule treatmentRule
—————————————————–
;
Remark:
This command is used to query extended VLAN rule configuration of
Rack1/Shelf1/Slot5/Port7/ONU1/Ethernet port 1 on 10.63.204.51.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

7-379

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

l Revision History

Revision Date Notes

NetNumenU31R20V12.17.20T115 2016-12-6 New TL1 Command

【Query ONU VoIP Configuration】

7.2.27 LST-ONU-VOIP【 】
l Description
This command is used to query ONU VoIP configuration.
l Applicable NE

NE Category NE Type Notes

PON OLT C300 Series/C300v2 Series/C300v3 Series

MSAN C300Mv4 Series

l Command Format
LST-ONU-VOIP::(DID=device-id|DNAME=device-name)[,[PID=port-id,]OID=onu-id]
:CTAG::[ONUPROFILENAME=onu-profile-name];
l Operated Target Identifier

Parameter Type Value Range Description Optional

Name Description

DID String SIZE(1-100) NE ID Required Under

Certain Conditions:
Must choose one
between DID and
DNAME

DNAME String SIZE(1-32) NE Name Required Under

Certain Conditions:
Must choose one
between DID and
DNAME

PID String rack-shelf-slot-port Port ID (e.g. 1-1-5-2) Optional

7-380

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

OID String rack-shelf-slot-port- ONU ID. It's used Required Under

onu MacAddress to identify the Certain
SN/LOID/Password ONU while DID or Conditions:Must
DNAME indicates choose one
the OLT device. between OID and
(e.g.1-1-1-2-1 ONUPROFILE-
00-18-FE-7C-64-E4 NAME
ZTEG54998768)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

ONUPRO- String SIZE(1-64) ONU Profile Name Required Under

FILENAME Certain
Conditions:Must
choose one
between OID and
ONUPROFILENAME

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
Title of Response Result: List of ONU VoIP Information

Parameter Name Type Value Range Description

DID String SIZE(1-100) NE ID

DNAME String SIZE(1-32) NE Name

OID String rack-shelf-slot-port-onu ONU ID. It's used to identify

MacAddress the ONU while DID or
SN/LOID/Password DNAME indicates the OLT
device. (e.g.1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

7-381

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

SUPPORTEDSIG- String None Supported Signal Protocol (e.g.

NALPROTOCOL SIP None,
H248 SIP/H248/MGCP)
MGCP
NonOMCI

USEDSIGNALPRO- String None Used Signal Protocol

TOCOL SIP
H248
MGCP
NonOMCI

SUPPORTED- String OMCI Supported Configuration

CONFMETHOD ConfFile Method (e.g. OMCI,
TR069 OMCI/ConfFile/TR069/IETF)
IETF

USED- String Default Used Configuration Method

CONFMETHOD OMCI
ConfFile
TR069
IETF

7-382

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

H248REGMODE String IPv4 H.248 Registration Mode

Domain
EquipName

ONUDOMAIN String SIZE(1-128) ONU Domain

H248EQUIPMENT- String SIZE(1-28) H.248 Equipment Name

NAME

MGCREGMODE String Wildcard MGC Registration Mode

Individual

LINENAMESN String SIZE(1-25) Line Name Serial Number

IPALLOCATING- String Single IP Allocating Mode

MODE Dual
Multiple

CONFSVRAD- String SIZE(1-128) Configuration Server Address

DRESS

7-383

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

CONFSVRVALIDA- String Disable Configuration Server Validation

TIONSCHEME MD5 Scheme
Basic

CONFSVRUSER- String SIZE(1-50) Configuration Server User

NAME Name

CONFSVRREALM String SIZE(1-32) Configuration Server Realm

CONFSTATUS String Inactive Configuration Status

Active
Initializing
Fault

l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
：
Command 1：
LST-ONU-VOIP::DID=10.63.196.165,OID=1-1-4-4-1:CTAG::;

Response：
SH10083644D02 2016-12-06 10:16:37
M CTAG COMPLD

EN=0 ENDESC=No Error

totalrecord=1
List of ONU VoIP Information

—————————————————–
DID DNAME OID SUPPORTEDSIGNALPROTOCOL USEDSIGNALPROTOCOL
SUPPORTEDCONFMETHOD USEDCONFMETHOD H248REGMODE

7-384

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

ONUDOMAIN H248EQUIPMENTNAME MGCREGMODE LINENAMESN

IPALLOCATINGMODE CONFSVRADDRESS CONFSVRVALIDATIONSCHEME
CONFSVRUSERNAME CONFSVRREALM CONFSTATUS
10.63.196.165 test 1-1-4-4-1 SIP/H248/MGCP H248 OMCI/ConfFile/TR069/IETF
OMCI IPv4 testDomain
equipName Wildcard – Single 10.1.1.1 MD5 username server Inactive
—————————————————–
;
Remark：
This command is used to query ONU VoIP information of
Rack1/Shelf1/Slot4/Port4/ONU1 on 10.63.196.165.
：
Command 2：
LST-ONU-VOIP::DID=10.63.196.165:CTAG::ONUPROFILENAME=remote-profile;
Response：
SH10083644D02 2017-08-01 11:16:37
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=1
List of ONU VoIP Information
—————————————————–
DID DNAME OID SUPPORTEDSIGNALPROTOCOL USEDSIGNALPROTOCOL
SUPPORTEDCONFMETHOD USEDCONFMETHOD H248REGMODE
ONUDOMAIN H248EQUIPMENTNAME MGCREGMODE LINENAMESN
IPALLOCATINGMODE CONFSVRADDRESS CONFSVRVALIDATIONSCHEME
CONFSVRUSERNAME CONFSVRREALM CONFSTATUS
10.63.196.165 test – SIP/H248/MGCP H248 OMCI/ConfFile/TR069/IETF OMCI IPv4
testDomain
equipName Wildcard – Single 10.1.1.1 MD5 username server Inactive
—————————————————–
;
Remark：
This command is used to query ONU VoIP information of ONU profile remote-profile
on 10.63.196.165.
l Average Command Response Time

Scenario Average Response Time (s)

7-385

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.17.20T115 2016-12-6 New TL1 Command

NetNumenU31R20V12.17.20T120 2017-08-01 New Command Parameters ：

ONUPROFILENAME

【Query ONU VoIP IP Configuration】

7.2.28 LST-ONU-VOIPIP【 】
l Description
This command is used to query ONU VoIP IP configuration.
l Applicable NE

NE Category NE Type Notes

PON OLT C300 Series/C300v2 Series/C300v3 Series

MSAN C300Mv4 Series

l Command Format
LST-ONU-VOIPIP::(DID=device-id|DNAME=device-name)[,PID=port-id][,OID=onu-id]
:CTAG::[ONUPROFILENAME=onu-profile-name];

l Operated Target Identifier

Parameter Type Value Range Description Optional

Name Description

7-386

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

DID String SIZE(1-100) NE ID Required Under

Certain Conditions:
Must choose one
between DID and
DNAME

DNAME String SIZE(1-32) NE Name Required Under

Certain Conditions:
Must choose one
between DID and
DNAME

PID String rack-shelf-slot-port Port ID (e.g. 1-1-5-2) Optional

OID String rack-shelf-slot-port- ONU ID. It's used Required Under

onu MacAddress to identify the Certain Condi-
SN/LOID/Password ONU while DID or tions:Must choose
DNAME indicates one between OID
the OLT device. and ONUPRO-
(e.g.1-1-1-2-1 FILENAME
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter

Parameter Value Range Description Optional

Name Type Description

ONUPRO- String SIZE(1-64) ONU Profile NAME Required Under Cer-

FILENAME tain Conditions:Must
choose one between
OID and ONUPRO-
FILENAME

l Response Format

Refer to Section 4.2.2.2 for detailed TL1 command response format.

l Response Parameters
Title of Response Result: List of ONU VoIP IP Information

Parameter Name Type Value Range Description

7-387

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

DID String SIZE(1-100) NE ID

DNAME String SIZE(1-32) NE Name

OID String rack-shelf-slot-port-onu ONU ID. It's used to identify

MacAddress the ONU while DID or
SN/LOID/Password DNAME indicates the OLT
device. (e.g.1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)
-- means not supported
ONUSLOT Integer 0-16 ONU Slot

IPALLOCATING- String SignalAndMedia IP Allocating Type

TYPE Media

IPMODE String Static IP Mode

DHCP
PPPoE

IPPROFILE String SIZE(1-64) IP Profile

VLANPROFILE String SIZE(1-64) VLAN Profile

7-388

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

HOSTID String SIZE(1-25) Host ID

ONUIDENTIFIER String SIZE(1-25) ONU Identifier

STATICIPTYPE String Unknown Static IP Address Type

IPv4
IPv6

STATICIP String IpAddress Static IP Address

STATICIPPRE- Integer 1-31 Static IP Address Prefix Length

FIXLENGTH Only Support for IPv4 .

PPPOEMODE String Auto PPPoE Mode

Chap
Pap

PPPOEUSER- String SIZE(1-128) PPPoE User Name

NAME

PPPOESERVICE- String SIZE(1-60) PPPoE Service Name

NAME

CURRENTIP String IpAddress Current IP Address

Only support for IPv4.

7-389

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

CURRENTIPPRE- Integer 1-31 Current IP Address Prefix

FIXLENGTH Length
Only support for IPv4.

CURRENTGATE- String IpAddress Current Gateway

WAY Only support for IPv4.

CURRENTPRIMA- String IpAddress Current Primary DNS

RYDNS Only support for IPv4.

CURRENTSEC- String IpAddress Current Secondary DNS

ONDARYDNS Only support for IPv4.

DHCPDOMAIN- String SIZE(1-25) DHCP Domain Name

NAME Only support for IPv4.

HOSTNAME String SIZE(1-25) Host Name

Only support for IPv4.

7-390

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

MAC String MacAddress MAC

RESPONDPIN- String Enable Respond to Ping Enabling

GENABLING Disable

RESPOND- String Enable Respond to Trace Route

TRACEROUTEEN- Disable Enabling
ABLING Only support for IPv4.

RSENABLING String Enable Router Solicitation Enabling

Disable Only support for IPv6.

ONLINKPREFIX String SIZE(17) On-link Prefix

Only support for IPv6.

LINKLOCALAD- String IpAddress Link Local Address

DRESS Only support for IPv6.

7-391

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

DHCPUNIQUEID String SIZE(1-25) DHCPv6 Unique ID

Only support for IPv6.

l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
：
Command 1：
LST-ONU-VOIPIP::DID=10.63.196.165,OID=1-1-4-4-1:CTAG::;
Response：
SH10083644D02 2016-12-06 10:16:37
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=1
List of ONU VoIP IP Information
—————————————————–
DID DNAME OID ONUSLOT IPALLOCATINGTYPE IPMODE IPPROFILE
VLANPROFILE HOSTID
ONUIDENTIFIER STATICIPTYPE STATICIP STATICIPPREFIXLENGTH
PPPOEMODE PPPOEUSERNAME
PPPOESERVICENAME CURRENTIP CURRENTIPPREFIXLENGTH
CURRENTGATEWAY CURRENTPRIMARYDNS
CURRENTSECONDARYDNS DHCPDOMAINNAME HOSTNAME MAC
RESPONDPINGENABLING
RESPONDTRACEROUTEENABLING RSENABLING ONLINKPREFIX
LINKLOCALADDRESS DHCPUNIQUEID
10.63.196.165 test 1-1-4-4-1 1 SignalAndMedia Static ippro vlanpro 1
– IPv4 10.1.1.1 24 – –
pppoesername 10.1.1.1 24 10.1.1.25 10.1.1.22
10.1.1.23 – – – Enable
Enable Disable – – –
—————————————————–

7-392

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

;
Remark：
This command is used to query ONU VoIP IP information of
Rack1/Shelf1/Slot4/Port4/ONU1 on 10.63.196.165.
l ：
Command 2：
LST-ONU-VOIPIP::DID=10.63.196.165:CTAG::ONUPROFILENAME=remote-profile;
Response：
SH10083644D02 2017-07-19 10:16:37
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=1
List of ONU VoIP IP Information
—————————————————–
DID DNAME OID ONUSLOT IPALLOCATINGTYPE IPMODE IPPROFILE
VLANPROFILE HOSTID
ONUIDENTIFIER STATICIPTYPE STATICIP STATICIPPREFIXLENGTH
PPPOEMODE PPPOEUSERNAME
PPPOESERVICENAME CURRENTIP CURRENTIPPREFIXLENGTH
CURRENTGATEWAY CURRENTPRIMARYDNS
CURRENTSECONDARYDNS DHCPDOMAINNAME HOSTNAME MAC
RESPONDPINGENABLING
RESPONDTRACEROUTEENABLING RSENABLING ONLINKPREFIX
LINKLOCALADDRESS DHCPUNIQUEID
10.63.196.165 test – 1 SignalAndMedia Static ippro vlanpro 1
– IPv4 10.1.1.1 24 – –
pppoesername 10.1.1.1 24 10.1.1.25 10.1.1.22
10.1.1.23 – – – Enable
Enable Disable – – –
—————————————————–
;
Remark：
This command is used to query ONU VoIP IP information of ONU profile remote-profile
on NE 10.63.196.165.
l Average Command Response Time

Scenario Average Response Time (s)

7-393

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.17.20T115 2016-12-6 New TL1 Command

NetNumenU31R20V12.17.20T120 2017-7-19 New Command Parameters：

ONUPROFILENAME

【Query ONU IPv4 IP Host】

7.2.29 LST-ONU-IPV4IPHOST【 】
l Description
This command is used to query the information of ONU IPv4 IP host.
l Applicable NE

NE Category NE Type Notes

PON OLT C300 Series/C300v2 Series/C300v3 Series

MSAN C300Mv4 Series

l Command Format
LST-ONU-IPV4IPHOST::(DID=device-id|DNAME=device-name)[,PID=port-id],
OID=onu-id:CTAG::[IPHOSTID=iphost-id];
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

7-394

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

port

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU
MacAddress while DID or DNAME
SN/LOID/Pass- indicates the OLT
word device.
(e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

IPHOSTID Integer 1–2 IP Host ID Optional

If not input, all IPv4
IP host information of
ONU will be listed.

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
Title of Response Result: List of ONU IPv4 IP host information

Parameter Name Type Value Range Description

DID String SIZE(1-100) NE ID

DNAME String SIZE(1-32) NE Name

OID String rack-shelf-slot-port- ONU ID

onu

7-395

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

IPHOSTID Integer 1-2 IP Host ID

MACADDRESS String MacAddress MAC Address

IPOPTIONS String EnableDHCP IP Options

RespondPing (e.g. EnableDHCP
RespondTraceRoute EnableDHCP/RespondPing
EnableIpStack /RespondTraceRoute)

ONUIDENTIFIER String SIZE(1-25) ONU Identifier

IP String IpAddress IP Address

IPMASK String IpAddress IP Mask

GATEWAY String IpAddress Gateway

PRIMARYDNS String IpAddress Primary DNS

SEC- String IpAddress Secondary DNS

ONDARYDNS
CURRENTIP String IpAddress Current IP Address

CURRENTIP- String IpAddress Current IP Mask

MASK
CURRENTGATE- String IpAddress Current Gateway
WAY

CURRENTPRI- String IpAddress Current Primary DNS

MARYDNS

CURRENTSEC- String IpAddress Current Secondary DNS

ONDARYDNS

DOMAINNAME String SIZE(1-25) Domain Name

7-396

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

HOSTNAME String SIZE(1-25) Host Name

l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
LST-ONU-IPV4IPHOST::DID=10.63.173.78,OID=1-1-2-1-1:CTAG::;
Response：
SH10083644D02 2016-12-02 10:16:37
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=2
List of ONU IPv4 IP host information
—————————————————–
DID DNAME OID IPHOSTID MACADDRESS IPOPTIONS ONUIDENTIFIER IP
IPMASK GATEWAY PRIMARYDNS SECONDARYDNS CURRENTIP
CURRENTIPMASK CURRENTGATEWAY CURRENTPRIMARYDNS
CURRENTSECONDARYDNS DOMAINNAME HOSTNAME
10.63.173.78 C300 1-1-2-1-1 1 00-00-00-00-00-00 EnableDHCP/RespondPing id1
10.3.3.3 255.255.255.0 10.3.3.1 10.3.3.5 10.3.3.36 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0
0.0.0.0 – –
2 12-34-66-00-00-00 RespondPing – 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0
0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 – –
—————————————————–
;
Remark:
This command is used to query IPv4 IP host information of
Rack1/Shelf1/Slot2/Port1/ONU1 on 10.63.173.78.
Command 2:
LST-ONU-IPV4IPHOST::DID=10.63.173.78,OID=1-1-2-1-1:CTAG::IPHOSTID=1;
Response：
EN=0 ENDESC=No Error

7-397

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

totalrecord=1
List of ONU IPv4 IP host information
—————————————————–
DID DNAME OID IPHOSTID MACADDRESS IPOPTIONS ONUIDENTIFIER IP
IPMASK GATEWAY PRIMARYDNS SECONDARYDNS CURRENTIP
CURRENTIPMASK CURRENTGATEWAY CURRENTPRIMARYDNS
CURRENTSECONDARYDNS DOMAINNAME HOSTNAME
10.63.173.78 C300 1-1-2-1-1 1 00-00-00-00-00-00 EnableDHCP/RespondPing id1
10.3.3.3 255.255.255.0 10.3.3.1 10.3.3.5 10.3.3.36 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0
0.0.0.0 – –
—————————————————–
;
Remark:
This command is used to query IPv4 IP host information of
Rack1/Shelf1/Slot2/Port1/ONU1/IPHOST1 on 10.63.173.78.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.17.20T115 2016-12-02 New TL1 Command

【 Query OLT Learnt MAC

7.2.30 LST-OLTMACADDRESS【
】
Address】
l Description
This command is used to query MAC address learnt by uplink port，PON port or ONU
of OLT.
l Applicable NE

NE Category NE Type Notes

PON OLT C220v1.2/C300 Series/C300v2 Series

7-398

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

l Command Format
LST-OLTMACADDRESS::OLTID=olt_name[,PONID=ponport_location,ONUIDTYPE=
onuid-type,ONUID=onu-index]:CTAG::;
l Operated Target Identifier

Parameter Type Value Range Description Optional

Name Description

OLTID OCTET SIZE(128) OLT IP Address or Required

STRING Name

PONID OCTET SIZE(128) To locate a Optional

STRING Rack–Shelf–Sl- PON port by
ot–PON Port ID Rack-Shelf-Slot-PON
Port ID. Type NA
when this parameter
is absent.

ONUIDTYPE OCTET ONU_NAME ONU ID Type Required if PONID is

STRING ONU_NUMBER input
MAC
LOID
SN
PASSWORD

ONUID OCTET SIZE(128) ONU identifier. Required if PONID is

STRING The value could input
be chosen from
ONU_NAME,
MAC, LOID and
ONU_NUMBER to
identify a single ONU
on the PON port.

l Command Parameter
None

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.

l Response Parameters
Title of Response Result: list of MAC Address

Parameter Name Type Value Range Description

7-399

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

PORT OCTET SIZE(0-128) To locate a port by

STRING Rack-Shelf-Slot-Port ID. Type
NA when this parameter is
absent.

PORTTYPE OCTET ETH Port Type

STRING EPON
GPON

MAC OCTET SIZE(0-128) MAC Address

STRING

MAC TYPE OCTET STATIC MAC Address Type

STRING DYNAMIC

ONUID OCTET SIZE(0-128) ONU ID

STRING

VLAN ID INTEGER 0-4095 VLAN ID

CVID INTEGER 0-4095 CVLAN ID. "--" means

-- unconfigured.

l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
LST-OLTMACADDRESS::OLTID=10.63.196.165:CTAG::;
Response：
ZTE_10.63.204.161 2013-10-31 16:05:24
M CTAG COMPLD
total_blocks=1
block_number=1
block_records=3

list of MAC Address

—————————————————–
PORT PORTTYPE MAC MAC TYPE ONUID VLAN ID CVID
1-1-4-4 EPON 38-46-08-29-12-3C DYNAMIC 2 10 200

7-400

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

1-1-4-4 EPON 38-46-08-29-12-3B DYNAMIC 2 11 201

1-1-4-4 EPON 38-46-08-29-12-3A DYNAMIC 2 12 202
—————————————————–
;
Remark:
This command is used to query MAC address learnt by uplink port and PON port of
OLT 10.63.196.165.
：
Command 2：
LST-OLTMACADDRESS::OLTID=10.46.41.14,PONID=1-1-7-1,ONUIDTYPE=ONU_
NUMBER, ONUID=1:CTAG::;
Response：
ZTE_10.63.204.128 2014-05-06 15:42:20
M CTAG COMPLD
total_blocks=1
block_number=1
block_records=4

list of MAC Address

—————————————————–
PORT PORTTYPE MAC MAC TYPE ONUID VLAN ID CVID
1-1-7-1 EPON 00-D0-D0-12-EE-EE DYNAMIC 1 60 1001
1-1-7-1 EPON 1A-D7-EA-10-00-FF DYNAMIC 1 61 400-800
1-1-7-1 EPON 16-5C-01-17-91-06 DYNAMIC 1 62 0
1-1-7-1 EPON 13-32-01-17-88-6B DYNAMIC 1 63 –
—————————————————–
;
Remark：
This command is used to query MAC address learnt by ONU.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

7-401

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

l Revision History

Revision Date Notes

NetNumenU31R20V12.13.40T70 2014-5-7 New Command Parameters：PONID,

ONUIDTYPE, ONUID

NetNumenU31R20V12.17.20T120 2017-5-26 New Response Parameters：CVID

【List Mac address of ONU UNI】

7.2.31 LST-PORTMACADDRESS【 】
l Description
This command is used for querying MAC address learnt by ONU UNI.
l Applicable NE

NE Category NE Type Notes

PON OLT C300 Series/C300v2 Series/C300v3 Series

PON ONU F820/LAN-MDU Series/xDSL-MDU Series/G.fast-MDU

Series

l Command Format

LST-PORTMACADDRESS::ONUIP=onu_name|OLTID=olt_name[,PONID=ponport_
location][,ONUIDTYPE=id-type,ONUID=onu_index][,PORTTYPE=uniport_type][,
PORTID=uniport_index][,VLAN=vlan_value]:CTAG::;
l Operated Target Identifier

Parameter Type Value Range Description Optional

Name Description

ONUIP String SIZE(128) IP address or name of the Required for

ONU that has management the ONU
IP that has
management
IP

OLTID String SIZE(128) OLT IP address, name, or Required for

ID the OLT or
the ONU
that has no
management
IP

7-402

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

PONID String SIZE(128) To locate a PON port by Optional

Rack–Shelf–Slot– Rack-Shelf-Slot-PON Port
PON Port ID ID. Type NA when this
parameter is absent.

ONUIDTYPE String ONU_NAME, ONU identifier type Optional.

MAC, (ONU_NAME, MAC, LOID, Query the
LOID, ONU_NUMBER) status of all
ONU_NUMBER ONUs under
the OLT PON
port if this
parameter is
absent.

ONUID String SIZE(128) ONU identifier. The value Optional.

could be chosen from Query the
ONU_NAME, MAC, LOID status of all
and ONU_NUMBER to ONUs under
uniquely identify an ONU on the OLT PON
the PON port. port if this
parameter is
absent.

PORTTYPE String Ethernet ONU UNI Type Optional

WiFi If not input, the default UNI
IPHost type is Ethernet。
VEIP Ethernet：Ethernet UNI
WiFi：WiFi UNI, GPON
SFU supported。
IPHost：IP host, GPON
SFU supported。
VEIP：VEIP，GPON SFU
supported。

PORTID String SIZE(128) To locate the ONU port Optional

Rack-Shelf-Slot- by Rack-Shelf-Slot-ONU
ONU Port ID Port ID. Type NA when this
parameter is absent.

VLAN Integer 1-4094 VLAN Optional

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters

Parameter Name Type Value Range Description

VLAN Integer 1-4094 VLAN

7-403

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

MAC String SIZE(1-128) MAC Address,format:

XX:XX:XX:XX:XX:XX

PORTTYPE String Ethernet Port Type

WiFi This response parameter
IPHost will be shown only when the
VEIP location command parameter
is ONU.

PORTID String SIZE(1-128) UNI Port of ONU

To locate an ONU port by
Rack-Shelf-Slot-ONU Port ID.
Type NA when this parameter
is absent.
This response parameter
will be shown only when the
location command parameter
is ONU.

l Error Code
DDOF、IIPE、EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
：
Command 1：
LST-PORTMACADDRESS::OLTID=192.168.60.99,PONID=1-1-2-1,ONUIDTYPE=
ONU_NUMBER,ONUID=4,PORTID=1-1-1-1:CTAG::;
Response：
SH10083644D02 2012-06-25 13:58:41
M CTAG COMPLD
EN=0 ENDESC=No Error

totalrecord=12

list of MAC Address

—————————————————–
VLAN MAC
– 00:00:5E:00:01:51
– 00:1B:0D:ED:0B:80
– 00:1E:73:91:0D:F1

7-404

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

– 00:26:ED:72:BF:0C
– 4C:54:99:45:C1:55
– 01:00:5E:00:00:01
– 01:10:01:80:C2:00
– 01:80:C2:00:00:00
– 0F:00:01:80:C2:00
– 0F:01:01:80:C2:00
– 0F:02:01:80:C2:00
– 0F:03:01:80:C2:00
—————————————————–
;
Remark：
This command is used to query MAC addresses learnt by
Rack1/Shelf1/Slot2/PonPort1/ONU4/ETHUNI1 on OLT 192.168.60.99.
：
Command 2：
LST-PORTMACADDRESS::ONUIP=10.63.174.168,PORTID=1-1-1-1:CTAG::;
Response：
SH10083644D02 2012-06-25 13:58:41
M CTAG COMPLD
EN=0 ENDESC=No Error

totalrecord=43

list of MAC Address

—————————————————–
VLAN MAC
100 44:87:FC:6F:31:31
100 02:10:18:01:00:01
100 00:24:21:BE:63:96
100 00:24:01:05:09:07
100 00:D0:D0:21:00:34
100 2C:41:38:94:65:85
100 00:D0:D0:01:02:7D
100 00:21:28:FA:7A:42

7-405

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

100 00:19:99:18:82:C8
100 F0:DE:F1:4A:B9:9A
100 00:1E:40:12:09:86
100 90:FB:A6:1C:5F:E0
100 00:25:12:D2:37:C6
100 00:1E:73:DF:02:47
100 00:D0:D0:63:93:98
100 00:1E:90:00:98:4C
100 5C:F3:FC:3A:47:8E
100 00:0C:29:62:91:A9
100 00:25:11:60:0F:43
100 00:21:97:EE:8C:61
100 00:D0:D0:9C:6B:51
100 44:87:FC:FB:2E:C4
100 00:15:EB:6F:D0:D1
100 5C:33:8E:F6:C7:B5
100 1C:6F:65:0C:55:4B
100 00:24:21:76:B4:35
100 F0:7D:68:16:65:BC
100 00:22:B0:68:89:F1
100 00:19:21:22:12:B6
100 00:D0:D0:21:FF:07
100 00:1D:60:C7:98:D9
100 00:24:21:74:35:90
100 00:D0:D0:C7:06:E1
100 00:1E:73:DF:11:40
100 00:1E:90:45:8A:F3
100 00:25:11:60:14:18
100 44:37:E6:10:50:0A
100 00:00:10:09:14:01
100 00:24:7E:04:82:6F
100 00:21:97:A9:0B:4A
100 00:25:12:EE:EE:EE
100 F0:DE:F1:81:E6:3A

7-406

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

100 00:1B:B9:F7:51:7A
—————————————————–
;
Remark：
This command is used to query MAC addresses learnt by Slot1/ETHUNI1 on MDU
10.63.174.168.
：
Command 3：
LST-PORTMACADDRESS::OLTID=192.168.60.99,PONID=1-1-3-1,ONUIDTYPE=
ONU_NUMBER,ONUID=6,PORTTYPE=WiFi,PORTID=1-1-1-1:CTAG::;
Response：
SH10083644D02 2014-09-16 10:40:11
M CTAG COMPLD
EN=0 ENDESC=No Error

totalrecord=5

list of MAC Address

—————————————————–
VLAN MAC
– 00:19:21:22:12:B6
– 00:1E:73:DF:11:40
– 00:21:97:A9:0B:4A
– F0:DE:F1:81:E6:3A
– 00:25:12:D2:37:C6
—————————————————–
;
Remark：
This command is used to query MAC addresses learnt by
Rack1/Shelf1/Slot3/PonPort1/ONU6/WiFiUNI1 on OLT 192.168.60.99.
：
Command 4：
LST-PORTMACADDRESS::OLTID=192.168.60.99,PONID=1-1-3-1,
ONUIDTYPE=ONU_NUMBER,ONUID=6:CTAG::;
Response：
SH10083644D02 2017-04-17 10:40:11

7-407

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=2
list of MAC Address
—————————————————–
VLAN MAC PORTTYPE PORTID
100 00:19:21:22:12:B6 Ethernet 1-1-1-1
101 00:19:21:22:12:B7 Ethernet 1-1-1-2
—————————————————–
;
Remark：
This command is used to query MAC addresses learnt by
Rack1/Shelf1/Slot3/PonPort1/ONU6 on OLT 192.168.60.99.

l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.14.20T80 2014-9-16 New Command Parameters：PORTTYPE

NetNumenU31R20V12.17.20T120 2017-4-17 Support to query by ONU

Change PORTID from Required to
Optional
New Response Parameters：PORTTYPE,
PORTID

【List VLAN ID】

7.2.32 LST-VLANID【 】
l Description
This command is used to get all VLAN ID information.
l Applicable NE

7-408

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

NE Category NE Type Notes

DSL DSL Series

PON ONU F820/LAN-MDU Series

PON OLT C220/C300 Series/C300v2 Series/C300v3 Series

MSAN MSAG5200/MSAG5200V3/MSG5208/U300/C300M
Series/C300Mv4 Series

l Command Format
LST-VLANID::(DID=device-ID|DNAME=device-name)[,OID=oid]:CTAG::;
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(0-100) NE ID Required Under Certain

Conditions: Must choose
one between DID and
DNAME

DNAME String SIZE(0-32) NE Name Required Under Certain

Conditions: Must choose
one between DID and
DNAME

OID String rack-shelf-slot-port- ONU ID Optional

onuport (e.g. 1-1-1-2-1, It's
used to identify the
ONU while DID or
DNAME indicates
the OLT device)

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
Title of Response Result: " List of All Vlan ID Info"

Parameter Type Value Range Description

Name

VLANID Integer 1-4094 VLAN ID

VLANNAME String SIZE(0-32) VLAN Name

l Error Code
DDNS, DDOF

7-409

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

Refer to Chapter 5 Unified Error Code Definition for more details.

l Example
No.1 Command:
LST-VLANID::DID=10.61.94.33:5::;
Response:
0 2004-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
totalrecord=3
List of All Vlan ID Info
———————————————————————–
VLANID VLANNAME
1 vlan001
2 vlan002
3 vlan003
———————————————————————–
;
Remark:
This command is used to get all Vlan ID information of 10.61.94.33.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Modifier Notes

【 Query ONU Profile of ONU

7.2.33 LST-ONU-ONUPROFILE【
】
Binding】
l Description

7-410

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

This command is used to query ONU profile of ONU binding.

l Applicable NE

NE Category NE Type Notes

PON OLT C220v1.2/C300 Series/C300v2 Series

MSAN C300Mv4 Series

l Command Format
LST-ONU-ONUPROFILE::(DID=device-ID|DNAME=device-name)[,PID=port-id],OID=
onu-id:CTAG::;
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

por

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU
MacAddress while DID or DNAME
SN/LOID/Pass- indicates the OLT
word device.
(e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter
None.
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
Title of Response Result: List of ONU profiles of ONU binding

7-411

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

Parameter Type Value Range Description

Name

DID String SIZE(1-100) NE ID

DNAME String SIZE(1-32) NE Name

OID String rack-shelf-slot-port-onu ONU ID

ONUPROFILE- String SIZE(1-65) ONU Profile Name

NAME If ONU has bound line and
remote profile, uses / to separate
different profile name.

l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
LST-ONU-ONUPROFILE::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::;
Response：
SH10083644D02 2014-08-19 14:19:37
M CTAG COMPLD
EN=0 ENDESC=No Error

totalrecord=1

List of ONU profile of ONU binding

—————————————————–
DID DNAME OID ONUPROFILENAME
10.63.173.78 TestNE 1-1-5-7-1 linePorfile/remoteProfile
—————————————————–
;
Remark:
This command is used to query Rack1/Shelf1/Slot5/Port7/ONU1 profile of ONU
binding on 10.63.173.78.
Command 2:
LST-ONU-ONUPROFILE::DID=10.63.204.51,OID=1-1-5-7-1:CTAG::;
Response：

7-412

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

SH10083644D02 2014-08-19 14:19:37

M CTAG COMPLD
EN=0 ENDESC=No Error

totalrecord=1

List of ONU profile of ONU binding

—————————————————–
DID DNAME OID ONUPROFILENAME
10.63.173.78 TestNE 1-1-5-7-1 InternetAndVoIPService
—————————————————–
;
Remark:
This command is used to query Rack1/Shelf1/Slot5/Port7/ONU1 profile of ONU
binding on 10.63.173.78.
Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.14.20T80 2014-10-30 New TL1 Command

【Query ONU Profile】

7.2.34 LST-ONUPROFILE【 】
l Description
This command is used to query all ONU profiles on NE.
l Applicable NE

NE Category NE Type Notes

PON OLT C220v1.2/C300 Series/C300v2 Series

MSAN C300Mv4 Series

7-413

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

l Command Format
LST-ONUPROFILE::DID=device-id|DNAME=device-name:CTAG::;
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

l Command Parameter
None.
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
Title of Response Result: List of ONU profile

Parameter Type Value Range Description

Name

DID String SIZE(1-100) NE ID

DNAME String SIZE(1-32) NE Name

ONUPROFILE- String SIZE(1-32) ONU Profile Name

NAME

ONUPROFILE- String Line ONU Profile Type

TYPE Remote It shows -- for the unification
ONU profile.
It shows Line or Remote for the
separation ONU profile.

l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example

7-414

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

Command 1:
LST-ONUPROFILE::DID=10.63.173.78:CTAG::;
Response：
SH10083644D02 2014-08-19 14:19:37
M CTAG COMPLD
EN=0 ENDESC=No Error

totalrecord=3

List of ONU profile

—————————————————–
DID DNAME ONUPROFILENAME ONUPROFILETYPE
10.63.173.78 TestNE testServiceProfile –
10.63.173.78 TestNE testLineProfile Line
10.63.173.78 TestNE testRemoteProfile Remote
—————————————————–
;

Remark:
This command is used to query all ONU profiles on NE 10.63.173.78.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.14.20T80 2014-08-20 New TL1 Command

NetNumenU31R20V12.14.20T80 2014-11-05 New Response Paramter:

ONUPROFILETYPE

7-415

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

【Query ONU WAN IP】

7.2.35 LST-ONUWANIP【 】
l Description
This command is used to query ONU WAN IP information.
l Applicable NE

NE Category NE Type Notes

PON OLT C220v1.2/C300 Series/C300v2 Series

l Command Format

LST-ONUWANIP::(DID=device-id|DNAME=device-name)[,PID=port-id][,OID=onu-id]
:CTAG::[ONUPROFILENAME=onu-profile-name][,IPHOSTID=iphost-id];
l Operated Target Identifier

Parameter Name Type Value Range Description Optional

Description

DID String SIZE(0-100) NE ID Required Under

Certain Conditions:
Must choose one
between DID and
DNAME

DNAME String SIZE(0-32) NE Name Required Under

Certain Conditions:
Must choose one
between DID and
DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

port

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU Under Certain
MacAddress while DID or DNAME Conditions:Must
SN/LOID/Pass- indicates the OLT choose one
word device. between OID and
(e.g. 1-1-1-2-1 ONUPROFILENAME
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter

Parameter Value Range Description Optional

Name Type Description

7-416

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

ONUPRO- String SIZE(1-64) ONU Profile NAME Required Under Cer-

FILENAME tain Conditions:Must
choose one between
OID and ONUPRO-
FILENAME

IPHOSTID Integer 1-255 IP Host ID

Optional

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
Title of Response Result: List of ONU WAN IP information

Parameter Name Type Value Range Description

DID String SIZE(0-100) NE ID

DNAME String SIZE(0-32) NE Name

OID String rack-shelf-slot-port-onu ONU ID

-- means not supported

IPHOSTID Integer 1-255 IP Host ID

IPMODE String Static IP Configuration Mode

DHCP
PPPoE

IP String IpAddress IP Address

Available if IPCONFMODE is
Static.

GATEWAY String IpAddress Gateway

Available if IPCONFMODE is
Static.

PRIMARYDNS String IpAddress Primary DNS

Available if IPCONFMODE is
Static.

SEC- String IpAddress Secondary DNS

ONDARYDNS Available if IPCONFMODE is
Static.

PPPOEMODE String Auto PPPoE Mode

Chap Available if IPCONFMODE is
Pap PPPoE.

PPPOEUSER String SIZE(0-32) PPPoE Username

Available if IPCONFMODE is
PPPoE.

7-417

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

PPPOEPWD String SIZE(0-32) PPPoE Password

Available if IPCONFMODE is
PPPoE.

ONUIDENTIFIER String SIZE(0-25) ONU Identifier

Available if IPCONFMODE is
PPPoE.

VID Integer 1-4094 VLAN ID

l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
LST-ONUWANIP::DID=10.63.194.46,OID=1-1-8-1-5:CTAG::;
Response：
SH10083644D02 2014-03-18 14:17:37
M CTAG COMPLD
EN=0 ENDESC=No Error

totalrecord=3

List of ONU WAN IP information

—————————————————–
DID DNAME OID IPHOSTID IPMODE IP GATEWAY PRIMARYDNS
SECONDARYDNS PPPOEMODE PPPOEUSER PPPOEPWD ONUIDENTIFIER
VID
10.63.194.46 10.63.194.46 1-1-8-1-5 1 Static 10.63.204.12 10.63.204.254
10.2.11.10 10.2.11.1 – – – – 300
10.63.194.46 10.63.194.46 1-1-8-1-5 2 DHCP – – – – – – – ZTEG54546456565 100
10.63.194.46 10.63.194.46 1-1-8-1-5 3 PPPoE – – – – Auto pppoeUser pppoePwd
– 200
—————————————————–
;
Remark:
This command is used to query WAN IP information of
Rack1/Shelf1/Slot8/Port1/ONU5 on 10.63.194.46.

7-418

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

Command 2:
LST-ONUWANIP::DID=10.63.194.46,OID=1-1-8-1-5:CTAG::IPHOSTID=1;
Response：
SH10083644D02 2014-03-18 14:19:20
M CTAG COMPLD
EN=0 ENDESC=No Error

totalrecord=1

List of ONU WAN IP information

—————————————————–
DID DNAME OID IPHOSTID IPMODE IP GATEWAY PRIMARYDNS
SECONDARYDNS PPPOEMODE PPPOEUSER PPPOEPWD ONUIDENTIFIER
VID
10.63.194.46 10.63.194.46 1-1-8-1-5 1 Static 10.63.204.12 10.63.204.254
10.2.11.10 10.2.11.1 – – – – 300
—————————————————–
;
Remark:
This command is used to query WAN IP information associated with IP Host 1 of
Rack1/Shelf1/Slot8/Port1/ONU5 on 10.63.194.46.
Command 3:
LST-ONUWANIP::DID=10.63.194.46:CTAG::ONUPROFILENAME=remote-profile;
Response：
SH10083644D02 2017-07-18 14:17:37
M CTAG COMPLD
EN=0 ENDESC=No Error

totalrecord=3

List of ONU WAN IP information

—————————————————–
DID DNAME OID IPHOSTID IPMODE IP GATEWAY PRIMARYDNS
SECONDARYDNS PPPOEMODE PPPOEUSER PPPOEPWD ONUIDENTIFIER
VID

7-419

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

10.63.194.46 10.63.194.46 – 1 Static 10.63.204.12 10.63.204.254 10.2.11.10

10.2.11.1 – – – – 300
10.63.194.46 10.63.194.46 – 2 DHCP – – – – – – – ZTEG54546456565 100
10.63.194.46 10.63.194.46 – 3 PPPoE – – – – Auto pppoeUser pppoePwd – 200
—————————————————–
;
Remark:
This command is used to query WAN IP information of ONU profile remote-profile on
NE 10.63.194.46.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.13.40T70 2014-03-20 New TL1 Command

NetNumenU31R20V12.17.20T120 2017-7-19 New Command
Parameters ：
ONUPROFILENAME

【Query ONU VoIP Line Status】

7.2.36 LST-ONU-VOIPLINESTAT【 】
l Description
This command is used to query the information of ONU VoIP line status.
l Applicable NE

NE Category NE Type Notes

PON OLT C300 Series/C300v2 Series/C300v3 Series

MSAN C300Mv4 Series

l Command Format
LST-ONU-VOIPLINESTAT::(DID=device-id|DNAME=device-name)[,PID=port-id],

7-420

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

OID=onu-id[,ONUPORT=onu-port]:CTAG::;
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

port

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU
MacAddress while DID or DNAME
SN/LOID/Pass- indicates the OLT
word device.
(e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

ONUPORT String [rack-][shelf-][sl- UNI Port of ONU Optional

ot-]port (e.g. 3-2: slot3-
port2 If no slot, 2:
port2 1-1-3-2: rack1-
shelf1-slot3-port2)

l Command Parameter
None
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
Title of Response Result: List of ONU VoIP line status

Parameter Name Type Value Range Description

7-421

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

DID String SIZE(1-100) NE ID

DNAME String SIZE(1-32) NE Name

OID String rack-shelf-slot-port-onu ONU ID

ONUPORT String [rack-][shelf-][slot-]port UNI Port of ONU

USEDCODEC String PCMU Used Codec

GSM
G723
DVI4For8kHz
DVI4For16kHz
LPC
PCMA
G722
L16For2Channels
L16For1Channel
QCELP
CN
MPA
G728
DVI4For11Dot025kHz
DVI4For22Dot050kHz
G729

VOICESERVERSTAT String Initial Voice Server Status

Registered
InSession
FailedRegistrationForICMPError
FailedRegistrationForFailedTCP
FailedRegistrationForFailedAuth
FailedRegistrationForTimeout
FailedRegistrationForSvrFailCode
FailedInviteForICMPError
FailedInviteForFailedTCP
FailedInviteForFailedAuth
FailedInviteForTimeout
FailedInviteForSvrFailCode
PortNotConfigured

7-422

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

PortConfigured

PORTSESSIONTYPE String Idle Port Session Type

TwoWay
ThreeWay
Fax
Telem
Conference

CALL1PACKETPE- Integer 1-2147483647 Call 1 Packet Period

RIOD (ms)
CALL2PACKETPE- Integer 1-2147483647 Call 2 Packet Period
RIOD (ms)
CALL1DESTINATION- String SIZE(1-25) Call 1 Destination
ADDRESS Address
CALL2DESTINATION- String SIZE(1-25) Call 2 Destination
ADDRESS Address

l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example

Command 1:
LST-ONU-VOIPLINESTAT::DID=10.63.173.78,OID=1-1-2-1-1:CTAG::;
Response：
SH10083644D02 2017-02-28 10:16:37
M CTAG COMPLD

EN=0 ENDESC=No Error

totalrecord=2

List of ONU VoIP line status

—————————————————–

DID DNAME OID ONUPORT USEDCODEC VOICESERVERSTAT

PORTSESSIONTYPE CALL1PACKETPERIOD CALL2PACKETPERIOD
CALL1DESTINATIONADDRESS CALL2DESTINATIONADDRESS
10.63.173.78 C300 1-1-2-1-1 1 G722 Initial Idle 68 30590 10.3.3.1 10.3.3.2

7-423

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

10.63.173.78 C300 1-1-2-1-1 2 G728 Initial Idle 68 30590 10.3.3.3 10.3.3.4

—————————————————–
;
Remark:
This command is used to query VoIP line status of Rack1/Shelf1/Slot2/Port1/ONU1
on 10.63.173.78.
Command 2:
LST-ONU-VOIPLINESTAT::DID=10.63.173.78,OID=1-1-2-1-1:CTAG::ONUPORT=1;
Response：
SH10083644D02 2017-02-28 10:16:38
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=1
List of ONU VoIP line status
—————————————————–
DID DNAME OID ONUPORT USEDCODEC VOICESERVERSTAT
PORTSESSIONTYPE CALL1PACKETPERIOD CALL2PACKETPERIOD
CALL1DESTINATIONADDRESS CALL2DESTINATIONADDRESS
10.63.173.78 C300 1-1-2-1-1 1 G722 Initial Idle 68 30590 10.3.3.1 10.3.3.2
—————————————————–
;
Remark:
This command is used to query VoIP line status of
Rack1/Shelf1/Slot2/Port1/ONU1/ONUPORT1 on 10.63.173.78.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.17.20T115 2017-2-28 New TL1 Command

7-424

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

【List ONU UNI Information】

7.2.37 LST-ONUUNI-PON【 】
l Description
This command is used to query ONU UNI information.
l Applicable NE

NE Category NE Type Notes

PON OLT C220v1.1/C220v1.2/C300 Series/C300v2

Series/C300v3 Series

PON ONU F820/LAN-MDU Series/xDSL-MDU Series

l Command Format
LST-ONUUNI-PON::(DID=device-ID|DNAME=device-name),OID=onu-id
[,PORT=port]:CTAG::;
l Operated Target Identifier

Parameter Name Type Value Range Description

DID String SIZE(0-100) NE ID

DNAME String SIZE(0-32) NE Name

OID String rack-shelf-slot-port-onu ONU ID. It's used to identify

MacAddress the ONU while DID or DNAME
SN/LOID indicates the OLT device
(e.g. 1-1-1-2-1
AA-BB-CC-DD-EE-FF
ABCDEFG)

PORT String port or slot-port ONU UNI port,

to show “Slot1 and Port1” Type
“1-1”when it is MDU

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
Title of Response Result: " List of ONU UNI Info"

Parameter Type Value Range Description

Name

DID String SIZE(0-100) NE ID

DNAME String SIZE(0-32) NE Name

7-425

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

OID String rack-shelf-slot-port-onu ONU ID

MacAddress
SN/LOID

UNIPORT Integer 1-24 UNI port

PORTTYPE String ethernet Port type

dsl

OPERSTATUS String online Operational status

offline

ADMINSTATUS String enabled Administrative status

disabled

BWTEMPLET String SIZE(0-64) Bandwidth templet

VLANTYPE String tag VLAN type

transparent
translate
trunk

VLANID Integer 1–4094 VLAN ID

VLANPRIORITY Integer 0–7 VLAN priority

SPEED String Auto Speed

10M
100M
1000M

DUPLEX String Auto Duplex

Half
Full

l Error Code
DDNS, DDOF

Refer to Chapter 5 Unified Error Code Definition for more details.

l Example
No.1 Command:

LST-ONUUNI-PON::DID=10.46.41.2,OID=1-1-2-4-1:CTAG::;

Response:
SH10083644D02 2012-07-12 14:27:55

M CTAG COMPLD
EN=0 ENDESC=No Error

totalrecord=4

7-426

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

List of ONU UNI Info

—————————————————–
DID DNAME ONUID UNIPORT PORTTYPE OPERSTATUS ADMINSTATUS
BWTEMPLET VLANTYPE VLANID VLANPRIORITY SPEED DUPLEX
10.46.41.2 10.46.41.2 1-1-2-4-1 1 ethernet – enabled – tag 4092 0 Auto Auto
10.46.41.2 10.46.41.2 1-1-2-4-1 2 ethernet – enabled – tag 200 6 Auto Auto
10.46.41.2 10.46.41.2 1-1-2-4-1 3 ethernet – enabled – tag 4092 0 Auto Auto
10.46.41.2 10.46.41.2 1-1-2-4-1 4 ethernet – enabled – tag 4092 0 Auto Auto
—————————————————–
;
Remark:
This command is used to query all the UNI port information of ONU.
No.2 Command:
LST-ONUUNI-PON::DID=10.46.41.2,OID=1-1-2-1-6,PORT=2-1:CTAG::;
Response:
SH10083644D02 2012-07-12 14:31:02
M CTAG COMPLD
EN=0 ENDESC=No Error

totalrecord=1

List of ONU UNI Info

—————————————————–
DID DNAME ONUID UNIPORT PORTTYPE OPERSTATUS ADMINSTATUS
BWTEMPLET VLANTYPE VLANID VLANPRIORITY SPEED DUPLEX
10.46.41.2 10.46.41.2 1-1-2-1-6 2-1 ethernet offline enabled – tag 1234 – – –
—————————————————–
;
Remark:
This command is used to query the specified UNI port information of ONU.
l Average Command Response Time

Scenario Average Response Time (s)

7-427

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

l Notes

Point Details

l Revision History

Revision Date Notes

【Query ONU Detail】

7.2.38 LST-ONU-DETAIL【 】
l Description

This command is used to query ONU detail.

l Applicable NE

NE Category NE Type Notes

PON OLT C300v2 Series/C300v3 Series

MSAN C300Mv4 Series

l Command Format
LST-ONU-DETAIL::(DID=device-id|DNAME=device-name)[,PID=port-id],OID=onu-id
:CTAG::;

l Operated Target Identifier

Parameter Type Value Range Description Optional

Name Description

DID String SIZE(1-100) NE ID Required Under

Certain Conditions:
Must choose one
between DID and
DNAME

7-428

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

DNAME String SIZE(1-32) NE Name Required Under

Certain Conditions:
Must choose one
between DID and
DNAME

PID String rack-shelf-slot-port Port ID (e.g. 1-1-5-2) Optional

OID String rack-shelf-slot-port- ONU ID. It's used Required

onu MacAddress to identify the
SN/LOID/Password ONU while DID or
DNAME indicates
the OLT device.
(e.g.1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
Title of Response Result: List of ONU Detail

Parameter Name Type Value Range Description

DID String SIZE(1-100) NE ID

DNAME String SIZE(1-32) NE Name

OID String rack-shelf-slot-port-onu ONU ID

NAME String SIZE(1-127) ONU Name

ADMINSTAT String Enable Administrative Status

Disable

7-429

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

OPERSTAT String Logging Operational Status

LOS
SyncMIB
Working
DyingGasp
AuthFailed
Offline

TYPE String SIZE(1-64) ONU Type

VPORTMODE String GEMPort VPort Mode

ONU
Manual

AUTHMODE String SN Authentication Mode

PWD
SNPlusPWD
RID
RIDPlus8021x
RIDPlusMutual
HexPWD
SNPlusHexPWD
LOID
LOIDPlusPWD
SNPlusRID
PSK

7-430

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

DESC String SIZE(1-200) ONU Description

SN String SIZE(12) Serial Number

PWD String SIZE(1-12) Password

LOID String SIZE(1-24) LOID

RID String SIZE(1-36) Register ID

DBAMODE String SR DBA Mode

NSR
Hybrid

FECENABLING String Enable FEC Enabling

Disable
Auto

OMCCTARGETEN- String Deactive OMCC Target Enabling

ABLING OMCCReady

TODENABLING String Enable ToD Enabling

Disable

OMCCENCRYP- String Enable OMCC Encryption Enabling

TIONENABLING Disable

MULTICASTEN- String Enable Multicast Encryption Enabling

CRYPTIONEN- Disable
ABLING

7-431

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

O1O7STAT String Unknown O1-O7 Status

Initial
Standby
PowerSetup
SerialNumber
Ranging
Operation
Popup

OMCCSTAT String Deactive OMCC Status

OMCCReady

FECENABLING- String Enable FEC Enabling Status

STAT Disable

MULTICASTEN- String Enable Multicast Encryption Status

CRYPTIONSTAT Disable

LASTONLINETIME String SIZE(19) ONU Last Online Time

YYYY-MM-DD HH:MM:SS

LASTOFFLINE- String SIZE(19) ONU Last Offline Time

TIME YYYY-MM-DD HH:MM:SS

7-432

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

LASTOF- String Unknown ONU Last Offline Reason

FLINEREASON OLTLOS
ONULOS
ONULOF
ONUSF
ONULOA
ONULOAM
AuthFailed
DyingGasp
DeactiveSuccess
DeactiveFailed
Reboot
Shutdown
Unauthorized
SNDisabled

FIBERLEN Integer 0-2147483647 Fiber Length

Unit: meter

MGMTIPTYPE String IPv4 Management IP Type

IPv6

MGMTIP String IpAddress Management IP Address

MGMTIPPRE- Integer 0-128 Management IP Prefix Length

FIXLEN
ONUPROFILE- String SIZE(1-64) ONU Profile Name
NAME

7-433

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

ONULINEPROFILE- String SIZE(1-64) ONU Line Profile Name

NAME

ONUREMOTEPRO- String SIZE(1-64) ONU Remote Profile Name

FILENAME

SWVER String SIZE(1-14) ONU Software Version

ETHNUM Integer 0-100 The Number of Ethernet Port

POTSNUM Integer 0-100 The Number of POTS Port

WIFINUM Integer 0-100 The Number of WiFi Port

CPUUSAGE Integer 0-100 CPU Usage

Unit: %

MEMORYUSAGE Integer 0-100 Memory Usage

Unit: %

l Error Code

DDOF, IIPE, EEH

Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
：
Command 1：
LST-ONU-DETAIL::DID=10.63.196.165,OID=1-1-4-4-1:CTAG::;
Response:
SH10083644D02 2017-04-24 10:16:37

M CTAG COMPLD
EN=0 ENDESC=No Error

totalrecord=1

List of ONU Detail

—————————————————–

DID DNAME OID NAME ADMINSTAT OPERSTAT TYPE VPORTMODE AUTHMODE

DESC SN PWD LOID RID

7-434

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

DBAMODE FECENABLING OMCCTARGETENABLING TODENABLING

OMCCENCRYPTIONENABLING MULTICASTENCRYPTIONENABLING
O1O7STAT OMCCSTAT FECENABLINGSTAT MULTICASTENCRYPTIONSTAT
LASTONLINETIME LASTOFFLINETIME
LASTOFFLINEREASON FIBERLEN MGMTIPTYPE MGMTIP MGMTIPPREFIXLEN
ONUPROFILENAME ONULINEPROFILENAME
ONUREMOTEPROFILENAME SWVER ETHNUM POTSNUM WIFINUM
CPUUSAGE MEMORYUSAGE
10.63.196.165 test 1-1-4-4-1 Enable Working F660 GEMPort LOID testONU – –
onuloid –
SR Enable Deactive Enable Enable Enable
Operation Deactive Enable Enable 2017-04-22 10:16:37 2017-04-21 09:11:22
ONULOS 20 IPv4 10.1.1.2 – profile1 –
– v1.2 4 2 1 23 42
—————————————————–
;
Remark：
This command is used to query ONU detail of Rack1/Shelf1/Slot4/Port4/ONU1 on
10.63.196.165.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.17.20T120 2017-4-25 New TL1 Command

【List VLAN ID】

7.2.39 LST-VLANID-TTP【 】
l Description
This command is used to get all VLAN ID information.

7-435

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

l Applicable NE

NE Category NE Type Notes

PON OLT C220/C300 Series/C300v2 Series/C300v3 Series

l Command Format
LST-VLANID-TTP::(DID=device-ID|DNAME=device-name)[,OID=oid]:CTAG::
[VLANPATTERN=vlan-pattern];
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(0-100) NE ID Required Under Certain

Conditions: Must choose
one between DID and
DNAME

DNAME String SIZE(0-32) NE Name Required Under Certain

Conditions: Must choose
one between DID and
DNAME

OID String rack-shelf-slot-port- ONU ID Optional

onuport (e.g. 1-1-1-2-1, It's
used to identify the
ONU while DID or
DNAME indicates
the OLT device)

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

VLANPAT- String Service VLAN Pattern Optional

TERN User If not input, all VLAN
information will be
listed.

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
Title of Response Result: " List of All Vlan ID Info"

Parameter Type Value Range Description

Name

7-436

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

VLANID Integer 1-4094 VLAN ID

VLANNAME String SIZE(0-32) VLAN Name

l Error Code
DDNS, DDOF
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
No.1 Command:
LST-VLANID-TTP::DID=10.61.94.33:5::;
Response:
0 2004-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
totalrecord=9
List of All Vlan ID Info
———————————————————————–
VLANID VLANNAME
1 vlan001
2 vlan002
3 vlan003
100 MulticastUserVLAN
101 VoIPUserVLAN
102 HSIUserVLAN
1000 MulticastServiceVLAN
1001 VoIPServiceVLAN
1002 HSIServiceVLAN
———————————————————————–
;
Remark:
This command is used to get all Vlan ID information of 10.61.94.33.
No.2 Command:
LST-VLANID-TTP::DID=10.61.94.33:5::VLANPATTERN=Service;
Response:
0 2004-04-01 10:55:49

7-437

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

M 5 COMPLD
EN=0 ENDESC=No Error
totalrecord=3
List of All Vlan ID Info
———————————————————————–
VLANID VLANNAME
1000 MulticastServiceVLAN
1001 VoIPServiceVLAN
1002 HSIServiceVLAN
———————————————————————–
;
Remark:
This command is used to get all Service Vlan ID information of 10.61.94.33.
No.3 Command:
LST-VLANID-TTP::DID=10.61.94.33:5::VLANPATTERN=User;
Response:
0 2004-04-01 10:55:49
M 5 COMPLD
EN=0 ENDESC=No Error
totalrecord=3
List of All Vlan ID Info
———————————————————————–
VLANID VLANNAME
100 MulticastUserVLAN
101 VoIPUserVLAN
102 HSIUserVLAN
———————————————————————–
;
Remark:
This command is used to get all User Vlan ID information of 10.61.94.33.
l Average Command Response Time

Scenario Average Response Time (s)

7-438

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.17. 2017-04-26 New TL1 Command

20T120

【Query ONU WiFi】

7.2.40 LST-ONU-WIFI【 】
l Description
This command is used to query the information of ONU WiFi.
l Applicable NE

NE Category NE Type Notes

PON OLT C300v2 Series/C300v3 Series

MSAN C300Mv4 Series

l Command Format
LST-ONU-WIFI::(DID=device-id|DNAME=device-name)[,PID=port-id],OID=onu-id:CTAG::;
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(1-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

port

7-439

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

OID String rack-shelf-slot- ONU ID. It's used Required

port-onu to identify the ONU
MacAddress while DID or DNAME
SN/LOID/Pass- indicates the OLT
word device.
(e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter
None.

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
Title of Response Result: List of ONU WiFi information

Parameter Name Type Value Range Description

DID String SIZE(1-100) NE ID

DNAME String SIZE(1-32) NE Name

OID String rack-shelf-slot-port- ONU ID

onu

WIFIID Integer 1-8 WiFi ID

ADMINSTAT String Enable Administrative Status

Disable

OPERSTAT String Enable Operational Status

Disable
RADIOMEASEN- String Enable Radio Measurement Enabling
ABLING Disable
ISOLATIONEN- String Enable Isolation Enabling
ABLING Disable
SGIENABLING String Enable SGI Enabling
Disable

7-440

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

WORKINGMODE String 802Dot11b Working Mode

802Dot11g
802Dot11n
802Dot11b-11g
802Dot11b-11g-11n

REGULATORY- String Other Regulatory Domain

DOMAIN USA
Canada
ETSI
Spain
France
MKK
China
Russia
Brazil
Egypt
Germany
Greece
Hongkong
Italy
Korea
UK
Portugal
Lithuania

CHANNEL String 1-13 WiFi Channel

Auto

CHANNELBAND- String 20MHz Channel Bandwith

WIDTH 40MHz

QOSTYPE String Disable QoS Type

WMM
SSID

7-441

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

TXRATE Auto Transmitting Rate

1Mbps
2Mbps
5Dot5Mbps
6Mbps
9Mbps
11Mbps
12Mbps
18Mbps
24Mbps
36Mbps
48Mbps
54Mbps

TXPOWER 100Percent Transmitting Power

80Percent
60Percent
40Percent
20Percent

l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
LST-ONU-WIFI::DID=10.63.173.78,OID=1-1-2-1-1:CTAG::;
Response：
SH10083644D02 2017-05-04 10:16:37
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=1
List of ONU WiFi information
—————————————————–
DID DNAME OID WIFIID ADMINSTAT OPERSTAT RADIOMEASENABLING

7-442

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

ISOLATIONENABLING SGIENABLING WORKINGMODE REGULATORYDOMAIN

CHANNEL CHANNELBANDWIDTH QOSTYPE TXRATE TXPOWER
10.63.173.78 C300 1-1-2-1-1 1 Enable Enable Enable Enable Enable
802Dot11b-11g-11n China 1 40MHz Disable Auto 80Percent
—————————————————–
;
Remark:
This command is used to query WiFi information of Rack1/Shelf1/Slot2/Port1/ONU1
on NE 10.63.173.78.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.17.20T120 2017-5-4 New TL1 Command

【Query ONU WiFi SSID】

7.2.41 LST-ONU-WIFISSID【 】
l Description
This command is used to query ONU WiFi SSID.
l Applicable NE

NE Category NE Type Notes

PON OLT C300v2 Series/C300v3 Series

MSAN C300Mv4 Series

l Command Format
LST-ONU-WIFISSID::(DID=device-id|DNAME=device-name)[,PID=port-id],OID=onu-id:CTAG::
[WIFIID=wifi-id,SSID=ssid];
l Operated Target Identifier

Parameter Type Value Range Description Optional

Name Description

7-443

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

DID String SIZE(1-100) NE ID Required Under

Certain Conditions:
Must choose one
between DID and
DNAME

DNAME String SIZE(1-32) NE Name Required Under

Certain Conditions:
Must choose one
between DID and
DNAME

PID String rack-shelf-slot-port Port ID (e.g. 1-1-5-2) Optional

OID String rack-shelf-slot-port- ONU ID. It's used Required

onu MacAddress to identify the
SN/LOID/Password ONU while DID or
DNAME indicates
the OLT device.
(e.g.1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

l Command Parameter

Parameter Name Type Value Range Descrip- Optional

tion Description

WIFIID Integer 1-8 WiFi ID Optional

SSID Integer 1-8 WiFi SSID Optional

l Response Format

Refer to Section 4.2.2.2 for detailed TL1 command response format.

l Response Parameters

7-444

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

Title of Response Result: List of ONU Detail

Parameter Name Type Value Range Description

DID String SIZE(1-100) NE ID

DNAME String SIZE(1-32) NE Name

OID String rack-shelf-slot-port-onu ONU ID

WIFIID Integer 1-8 WiFi ID

SSID Integer 1-8 WiFi SSID

ADMINSTAT String Enable SSID Administrative Status

Disable

SSIDNAME String SIZE(1-32) SSID Name

HIDEENABLING String Enable Hide Enabling

Disable

ISOLATIONEN- String Enable Isolation Enabling

ABLING Disable

MAXUSERNUM Integer 1-65535 Maximum User Number

CURRENTUSER- Integer 0-65535 Current User Number

NUM

MAC String SIZE(17) MAC Address

7-445

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

AUTHALG String OpenSystem SSID Authentication

SharedKey Algorithms
WpaPsk
Wpa2Psk
WpaPskAndWpa2Psk

WEPENCRYPTEN- String Enable WEP Encryption Enabling

ABLING Disable

WEPKEYLEN String 64 WEP Key Length

128

WEPKEYFORMAT String ASCII WEP Key Format

Hex

WEPKEYVALUE String SIZE(23|43|55|107) WEP Key Value

WEPDEFAULTKEY Integer 1-4 WEP Default Key

ENCRYPT String Aes WPA Encryption Algorithm

Tkip
Wep

7-446

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

PASSWORD String SIZE(8-63) WPA Encryption Key Value

PWDUPDATEIN- Integer 100-1000 WPA Encryption Key Updating

TERVAL Interval(s)

l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
：
Command 1：
LST-ONU-WIFISSID::DID=10.63.196.165,OID=1-1-4-4-1:CTAG::;
Response:
SH10083644D02 2017-05-04 10:16:37
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=1
List of ONU WiFi SSID
—————————————————–
DID DNAME OID WIFIID SSID ADMINSTAT SSIDNAME HIDEENABLING
ISOLATIONENABLING MAXUSERNUM
CURRENTUSERNUM MAC AUTHALG WEPENCRYPTENABLING WEPKEYLEN
WEPKEYFORMAT WEPKEYVALUE
WEPDEFAULTKEY ENCRYPT PASSWORD PWDUPDATEINTERVAL
10.63.196.165 test 1-1-4-4-1 1 1 Enable name1 Enable Enable 32
0 00-00-00-00-00-00 WpaPskAndWpa2Psk – – – –
– Aes/Tkip 12345678 600
—————————————————–
;
Remark：
This command is used to query ONU WiFi SSID of Rack1/Shelf1/Slot4/Port4/ONU1
on 10.63.196.165.

7-447

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.17.20T120 2017-5-4 New TL1 Command

【 Query TCONT Bandwidth

7.2.42 LST-TCONTBWPROFILE【
】
Profile】
l Description
This command is used to query T-CONT bandwidth configuration.
l Applicable NE

NE Category NE Type Notes

PON OLT C220v1.2/C300 Series/C300v2 Series/C300v3 Series

MSAN C300Mv4 Series

l Command Format
LST-TCONTBWPROFILE::(DID=device-id|DNAME=device-name):CTAG::[BWPROFILENAME=
bandwidth-profile-name];
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(0-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

7-448

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

DNAME String SIZE(0-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

BWPRO- String SIZE(1-64) Bandwidth Profile Optional

FILENAME Name

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters

Title of Response Result: List of T-CONT bandwidth profile information

Parameter Name Type Value Range Description

DID String SIZE(0-100) NE ID

DNAME String SIZE(0-32) NE Name

BWPROFILE- String SIZE(1-64) Bandwidth Profile Name

NAME

BWTYPE String Fixed Bandwidth Type

Assured
AssuredAndNonassured
BestEffort
All

FIXEDBW Integer 0-9953280 Fixed Bandwidth

Unit: kbps

ASSUREDBW Integer 0-9953280 Assured Bandwidth

Unit: kbps

7-449

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

MAXIMUMBW Integer 0-9953280 Maximum Bandwidth

Unit: kbps

PRIORITY Integer 1-4 Priority

WEIGHT Integer 1-1000 Weight

l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
LST-TCONTBWPROFILE::DID=10.63.173.78:CTAG::;
Response：
SH10083644D02 2017-09-30 14:19:37
M CTAG COMPLD
EN=0 ENDESC=No Error

totalrecord=2

List of T-CONT bandwidth profile information

—————————————————–
DID DNAME BWPROFILENAME BWTYPE FIXEDBW ASSUREDBW
MAXIMUMBW PRIORITY WEIGHT
10.63.173.78 MT-OLT T1-200M Fixed 200000 0 0 1 1
10.63.173.78 MT-OLT 480M Assured 0 480000 0 1 1
—————————————————–
;
Remark:
This command is used to query T-CONT bandwidth configuration on NE 10.63.173.78.
Command 2:
LST-TCONTBWPROFILE::DID=10.63.173.78:CTAG::BWPROFILENAME=T1-200M;
Response：

7-450

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

SH10083644D02 2017-09-30 14:19:37

M CTAG COMPLD
EN=0 ENDESC=No Error

totalrecord=1

List of T-CONT bandwidth profile information

—————————————————–
DID DNAME BWPROFILENAME BWTYPE FIXEDBW ASSUREDBW
MAXIMUMBW PRIORITY WEIGHT
10.63.173.78 MT-OLT T1-200M Fixed 200000 0 0 1 1
—————————————————–
;
This command is used to query T-CONT bandwidth configuration of profile T1-200M
on NE 10.63.173.78.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.17.20T125 2017-9-30 New TL1 Command

【Query ONU SIP Profile】

7.2.43 LST-ONUSIPPROFILE【 】
l Description
This command is used to query ONU SIP profile information.
l Applicable NE

NE Category NE Type Notes

PON OLT C300v2 Series/C300v3 Series

7-451

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

MSAN C300Mv4 Series

l Command Format
LST-ONUSIPPROFILE::(DID=device-id|DNAME=device-name):CTAG::[SIPPROFILENAME=
sip-profile-name];
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(0-100) NE ID Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

DNAME String SIZE(0-32) NE Name Required

Under Certain
Conditions:Must
choose one between
DID and DNAME

l Command Parameter

Parameter Type Value Range Description Optional Description

Name

SIPPRO- String SIZE(1-64) SIP Profile Name Optional (If not input,
FILENAME all profiles of the NE
will be listed.)

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters

Title of Response Result: List of ONU SIP profile information

Parameter Name Type Value Range Description

DID String SIZE(0-100) NE ID

DNAME String SIZE(0-32) NE Name

SIPPROFILE- String SIZE(1-64) SIP Profile Name

NAME

PROX- String SIZE(0-128) Proxy Server Address

YSVRADDR

7-452

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

OUTBOUND- String SIZE(0-128) Out-of-band Server Address

PROX-
YSVRADDR

PRIMA- String IPv4 Primary DNS IP Type

RYDNSTYPE IPv6
PRIMARYDNS String IpAddress Primary DNS

SECONDARYD- String IPv4 Secondary DNS IP Type

NSTYPE IPv6
SEC- String IpAddress Secondary DNS
ONDARYDNS
UDPPORT Integer 1–65535 UDP Port

REGEXPIRA- Integer 0–2147483647 Registration Expiration Time

TIONTIME Unit: Seconds
REREG- Integer 0–2147483647 Time From Re-registration to
TOSTARTTIME Starting
Unit: Seconds

HOSTPARTURI String SIZE(0-128) Host Part URI

REGSVR String SIZE(0-128) Registration Server

VALIDATION- String Disable Validation Scheme

SCHEME MD5
Basic

REGSVRUSER- String SIZE(0-50) Registration Server User Name

NAME
REGSVRPWD String SIZE(0-25) Registration Server Password

REGSVRREALM String SIZE(0-25) Registration Server Realm

SSVENDOR String SIZE(0-4) Softswitch Vendor

NETWORKDI- String SIZE(0-64) Network Dial Plan Profile

ALPLANPRF

RELEASETIMER Integer 0–255 Release Timer

Unit: Seconds

7-453

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

ROHTIMER Integer 0–255 ROH Timer

Unit: Seconds
QOSTAGMODE String ToS QoS Tagging Mode
DSCP
QOSTAGVALUE Integer 0–63 QoS Tagging Value

MEDIAUDP- Integer 1–65535 Media UDP Port

PORT
MEDIAQOSTAG- String ToS Media QoS Tagging Mode
MODE DSCP
MEDIAQOSTAG- Integer 0–63 Media QoS Tagging Value
VALUE
HEARTBEATEN- String Enable Heart Beat Enabling
ABLING Disable
HEARTBEATIN- Integer 0–600000 Heart Beat Interval
TERVAL Unit: Seconds
APPSERVI- String SIZE(0-64) Application Service Profile
CEPRF
FEATUREAC- String SIZE(0-64) Feature Access Codes Profile
CESSCODE-
SPRF

l Error Code
DDOF, IIPE, EEH
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
LST-ONUSIPPROFILE::DID=10.63.173.78:CTAG::;
Response：
SH10083644D02 2017-10-30 14:19:37
M CTAG COMPLD
EN=0 ENDESC=No Error

totalrecord=2

List of ONU SIP profile information

—————————————————–
DID DNAME SIPPROFILENAME PROXYSVRADDR
OUTBOUNDPROXYSVRADDR PRIMARYDNSTYPE PRIMARYDNS

7-454

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

SECONDARYDNSTYPE SECONDARYDNS UDPPORT REGEXPIRATIONTIME

REREGTOSTARTTIME HOSTPARTURI REGSVR VALIDATIONSCHEME
REGSVRUSERNAME REGSVRPWD REGSVRREALM SSVENDOR
NETWORKDIALPLANPRF RELEASETIMER ROHTIMER QOSTAGMODE
QOSTAGVALUE MEDIAUDPPORT MEDIAQOSTAGMODE MEDIAQOSTAGVALUE
HEARTBEATENABLING HEARTBEATINTERVAL APPSERVICEPRF
FEATUREACCESSCODESPRF
10.63.173.78 MT-OLT sipProfile1 1.2.23.4 1.2.2.34 IPv4 1.2.2.7 IPv4 1.2.2.1 100
3600 360 aaabbb 10.10.10.10 Disable – – – ss networkPlanProfile 10 15 ToS 6 555
ToS 4 Enable 22 AppServiceProfile AccessCodeProfile
10.63.173.78 MT-OLT sipProfile2 1.2.23.34 1.2.2.34 IPv4 1.2.2.3 IPv4 1.2.2.1 100
3600 360 aaabbb 10.10.10.10 Disable – – – ss networkPlanProfile 10 15 ToS 6 555
ToS 4 Enable 20 AppServiceProfile AccessCodeProfile
—————————————————–
;
Remark:

This command is used to query ONU SIP profile information on NE 10.63.173.78.

Command 2:
LST-ONUSIPPROFILE::DID=10.63.173.78:CTAG::BWPROFILENAME=sipProfile1;
Response：
SH10083644D02 2017-10-30 14:19:37
M CTAG COMPLD

EN=0 ENDESC=No Error

totalrecord=1

List of ONU SIP profile information

—————————————————–
DID DNAME SIPPROFILENAME PROXYSVRADDR
OUTBOUNDPROXYSVRADDR PRIMARYDNSTYPE PRIMARYDNS
SECONDARYDNSTYPE SECONDARYDNS UDPPORT REGEXPIRATIONTIME
REREGTOSTARTTIME HOSTPARTURI REGSVR VALIDATIONSCHEME
REGSVRUSERNAME REGSVRPWD REGSVRREALM SSVENDOR
NETWORKDIALPLANPRF RELEASETIMER ROHTIMER QOSTAGMODE
QOSTAGVALUE MEDIAUDPPORT MEDIAQOSTAGMODE MEDIAQOSTAGVALUE
HEARTBEATENABLING HEARTBEATINTERVAL APPSERVICEPRF
FEATUREACCESSCODESPRF

7-455

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

10.63.173.78 MT-OLT sipProfile1 1.2.23.4 1.2.2.34 IPv4 1.2.2.7 IPv4 1.2.2.1 100
3600 360 aaabbb 10.10.10.10 Disable – – – ss networkPlanProfile 10 15 ToS 6 555
ToS 4 Enable 22 AppServiceProfile AccessCodeProfile
—————————————————–
;
This command is used to query ONU SIP profile sipProfile1 information on NE
10.63.173.78.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.17.20T125 2017-10-30 New TL1 Command

【 Query ONU Type Profile

7.2.44 LST-ONUTYPEPROFILE【
】
Information】
l Description
This command is used to query ONU type profile information.
l Applicable NE

NE Category NE Type Notes

PON OLT C300v2 Series/C300v3 Series

MSAN C300Mv4 Series

l Command Format
LST-ONUTYPEPROFILE::(DID=device-id|DNAME=device-name):CTAG::
[TYPEPROFILENAME=type-profile-name];
l Operated Target Identifier

Parameter Type Value Range Description Optional

Name Description

7-456

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

DID String SIZE(1-100) NE ID Required Under

Certain Conditions:
Must choose one
between DID and
DNAME

DNAME String SIZE(1-32) NE Name Required Under

Certain Conditions:
Must choose one
between DID and
DNAME

l Command Parameter

Parameter Type Value Range Description Optional

Name Description

TYPEPROFILE- String SIZE(1-64) Type Profile Name Optional (If not input,
NAME all profiles of the NE
will be listed.)

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters

Title of Response Result: List of ONU type profile information

Parameter Name Type Value Range Description

DID String SIZE(1-100) NE ID

DNAME String SIZE(1-32) NE Name

7-457

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

TYPEPROFILE- String SIZE(1-64) Type Profile Name

NAME

PROFILETYPE String GPON Profile Type

EPON

DESCRIPTION String SIZE(1-64) Description

MAXTCONTNUM Integer 1-255 The Maximum Number of

T-CONT

MAXGEMPORT- Integer 1-255 The Maximum Number of GEM

NUM Port

MAXMACBRID- Integer 1-255 The Maximum Number of MAC

GENUM Bridge

MAXMACBRIDGE- Integer 1-255 The Maximum Number of MAC

UPLINKNUM Bridge Uplink Port

MAXIPHOSTNUM Integer 0-255 The Maximum Number of IP

Host

VEIPNUM Integer 0-255 The Number of VEIP

MGCCONFMODE String Private MGC Configuration Mode

ITUT
PrivateAndITUT

7-458

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

EXTENDEDOM- String Enable Extended OMCI Enabling

CIENABLING Disable

GISCONFEN- String Enable GIS Configuration Enabling

ABLING Disable

SERVICECAPABIL- String Nto1 Service Capability Mode(e.g.

ITYMODE 1toM Nto1,
1toP Nto1/1toM,
Nto1/1toM/1toP
)

ETHPORTNUM Integer 0-32 The Number of Ethernet Port

POTSPORTNUM Integer 0-32 The Number of POTS Port

WIFIPORTNUM Integer 0-32 The Number of WiFi Port

RFPORTNUM Integer 0-32 The Number of RF Port

l Error Code

DDOF, IIPE, EEH

Refer to Chapter 5 Unified Error Code Definition for more details.

l Example
：
Command 1：
LST-ONUTYPEPROFILE::DID=10.63.196.165:CTAG::TYPEPROFILENAME=ZTE-F628;

Response：
SH10083644D02 2017-10-31 10:16:37

7-459

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=1
List of ONU type profile information
—————————————————–
DID DNAME TYPEPROFILENAME PROFILETYPE DESCRIPTION

MAXTCONTNUM MAXGEMPORTNUM MAXMACBRIDGENUM

MAXMACBRIDGEUPLINKNUM MAXIPHOSTNUM VEIPNUM
MGCCONFMODE EXTENDEDOMCIENABLING
GISCONFENABLING SERVICECAPABILITYMODE ETHPORTNUM

POTSPORTNUM WIFIPORTNUM RFPORTNUM

10.63.196.165 test ZTE-F628 GPON profile
4 4 6 1 2 1 Private Enable Enable
Nto1/1toM/1toP 4 2 2 2
—————————————————–
;
Remark：

This command is used to query ONU type profile ZTE-F628 information on NE

10.63.196.165.
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.17.20T125 2017-10-30 New TL1 Command

7-460

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

7.3 Alarm
【List Alarms】
7.3.1 LST-ALARM【 】
l Description
This command is used to retrieve the alarms on a NE or a board or a port or an ONU.
If no condition is specified, all alarms will be returned.
l Applicable NE
This command is applicable for all NE types.
l Command Format
LST-ALARM::[DID=device-id|DNAME=device-name][,BID=board-id|PID=port-id]
[,OID=onu-id]:CTAG::;
l Operated Target Identifier

Parameter Type Value Range Description Optional Description

Name

DID String SIZE(1-100) NE ID Optional

DNAME String SIZE(1-32) NE Name Optional

BID String rack-shelf-slot Board ID (e.g. 1-1-5) Optional

PID String rack-shelf-slot- Port ID (e.g. 1-1-5-2) Optional

port

OID String rack-shelf-slot- ONU ID. It's used Optional

port-onu to identify the ONU
MacAddress while DID or DNAME
SN/LOID/Pass- indicates the OLT
word device.
(e.g. 1-1-1-2-1
00-18-FE-7C-64-E4
ZTEG54998768)

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
Table Title: List of Alarm information

Parameter Name Type Value Range Description

ALARMID String SIZE(1-100) Alarm ID

ALARMDESC String SIZE(1-256) Alarm Name

DID String SIZE(1-100) NE ID

7-461

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

DIP String IpAddress NE IP Address

DNAME String SIZE(1-32) NE Name

DTYPE String SIZE(1-32) Device Type

POSITION String SIZE(1-32) Alarm Position

For board alarm,
the format is
DIP_rack_shelf_slot.
For port alarm, the
format is DIP_rack_s-
helf_slot_port.

SEVERITY String Critical Alarm Severity

Major
Minor
Warning

HAPPENTIME String SIZE(1-32) Alarm Raised Time

ALARMTYPE String SIZE(1-100) Alarm Type

DESC String SIZE(1-256) Description

ENTITY_ID String SIZE(1-100) Entity ID

EVENT_CODE Integer 0-(2^32-1) Alarm Code

PROBA- String SIZE(1-256) Probable Cause

BLE_CAUSE_DESC Description

PROBA- Integer 0-(2^32-1) Probable Cause Code

BEL_CAUSE_CODE

SYSTEM_TYPE Integer 1–65535 Alarm System

Type. Internal
flag. Identification
alarm code with
EVENT_CODE. Not
recommended to use
it.

ACKSTATUS String Unacknowledged Alarm Acknowledg-

Acknowledged ment Status

l Error Code
IIPF, EEH, IIAC
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command 1:
LST-ALARM::DID=10.61.94.33:CTAG::;

7-462

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

Response:
netsh115182d1 2006-12-20 09:22:02
M CTAG COMPLD
EN=0 ENDESC=No Error
totalrecord=1
List of Alarm information
—————————————————–
ALARMID ALARMDESC DID DIP DNAME DTYPE POSITION SEVERITY HAPPENTIME
ALARMTYPE DESC ENTITY_ID EVENT_CODE PROBABLE_CAUSE_DESC
PROBABEL_CAUSE_CODE SYSTEM_TYPE ACKSTATUS
1349923573173 Ems Server hard disk usage 10.61.94.33 10.61.94.33 EMS
Server(10.61.94.33) common_ems 10.61.94.33 Major 2012-10-11
10:46:12 Omc_Alarm Server 10.61.94.33, Hard disk: d:\Exceeds the monitoring
threshold. ( Utilization: 87.81%, Threshold: [Serious: 90.00%][Main: 85.00%][Minor:
80.00%][Warn: 75.00%] ) 10.61.94.33HD:d:\1004 1004 -1 6 Unacknowledged
—————————————————–
;
Remark:
This command is used to retrieve all the alarms on 10.61.94.33.
Command 2:
LST-ALARM::DID=10.63.194.46,PID=1-1-2-1:CTAG::;
Response:
netsh115182d1 2013-09-18 10:54:19
M CTAG COMPLD
EN=0 ENDESC=No Error

totalrecord=1

List of Alarm information

—————————————————–
ALARMID ALARMDESC DID DIP DNAME DTYPE POSITION SEVERITY
HAPPENTIME ALARMTYPE DESC ENTITY_ID EVENT_CODE
PROBABLE_CAUSE_DESC PROBABEL_CAUSE_CODE SYSTEM_TYPE ACKSTATUS
1379471158596 [EPON Alarm] PON LOS(Loss of signal)10.63.194.46 10.63.194.46
10.63.194.46 C300v1.0 EMS Server(10.63.204.177)._10.63.194.46_1_1_2_1 Critical

7-463

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

2013-09-10 04:50:27 Communications_Alarm – IP Address:10.63.194.46|73 43015

All ONUs of the PON port are power down 430150004 766 Unacknowledged
—————————————————–
;
Remark:
This command is used to retrieve all the alarms of Rack1/Shelf1/Slot2/Port1 on
10.63.194.46.
Command 3:
LST-ALARM::DID=10.63.204.232,OID=1-1-4-1-10:CTAG::;
Response:
netsh115182d1 2017-07-06 12:34:59
M CTAG COMPLD
EN=0 ENDESC=No Error

totalrecord=1

List of Alarm information

—————————————————–
ALARMID ALARMDESC DID DIP DNAME DTYPE POSITION SEVERITY
HAPPENTIME ALARMTYPE DESC ENTITY_ID EVENT_CODE
PROBABLE_CAUSE_DESC PROBABEL_CAUSE_CODE SYSTEM_TYPE ACKSTATUS
1499308223509 [GPON Alarm]ONU Signal Degrade(35117) 10.63.204.232
10.63.204.232
10.63.204.232 C300v1.3 10.63.204.232_1_1_4_1_10 Minor 2017-06-27 19:53:09
QoSAlarm
ONU ID=10,ONU Name=1,ONU Type=F832,ONU Registration Info: Sn =
ZTEGC5149258
IP Address:10.63.204.232|956 35117 1.Fiber link decline. 2.ONU service decline.
351170000 768 Unacknowledged
—————————————————–
;
Remark:
This command is used to retrieve all the alarms of Rack1/Shelf1/Slot2/Port1/ONU10
on 10.63.204.232.
l Average Command Response Time

7-464

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

NetNumenU31R20V12.13.20T50 2013-9-22 New Command

Parameters: PID

NetNumenU31R20V12.17.20T120 2017-7-6 New Command

Parameters: OID

7.4 System
【Login EMS】
7.4.1 LOGIN【 】
l Description
This command is used to login EMS, after a successful TCP connection. If user
authentication function is enabled, north interface command for equipment operation
can be issued.
l Applicable NE

NE Category NE Type Notes

PON OLT C220v1.1/C220v1.2/C300 Series/C300v2 Series/C300v3

Series

PON ONU F820/LAN-MDU Series/xDSL-MDU Series/FTTH ONU

l Command Format
LOGIN:::CTAG::UN=user-name,PWD=password;
l Command Parameter

Parameter Type Value Range Description Optional Description

Name

UN OCTET SIZE(20) User Name Required

STRING

PWD OCTET SIZE(16) User Password Required

STRING

7-465

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None
l Error Code
IMP, SSOF
Refer to Chapter 5 Unified Error Code Definition for more details.
l Example
Command:
LOGIN:::CTAG::UN=admin,PWD=admin;
Response:
ZTE_10.63.174.210 2012-08-17 11:17:37
M CTAG COMPLD
EN=0 ENDESC=No Error
;
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

【Logout EMS】
7.4.2 LOGOUT【 】
l Description
This command is used to logout EMS, after operation completed.
l Applicable NE

NE Category NE Type Notes

PON OLT C220v1.1/C220v1.2/C300 Series/C300v2 Series/C300v3 Series

PON ONU F820/LAN-MDU Series/xDSL-MDU Series/FTTH ONU

7-466

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

l Command Format
LOGOUT:::CTAG::;
l Command Parameter
None
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.

l Response Parameters
None
l Error Code
SSOF

Refer to Chapter 5 Unified Error Code Definition for more details.

l Example
Command:
LOGOUT:::CTAG::;
Response:
ZTE_10.63.174.210 2012-08-27 10:29:23
M 5 COMPLD

EN=0 ENDESC=No Error

;
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

Revision Date Notes

【Shakehand Command】
7.4.3 SHAKEHAND【 】
l Description

7-467

|07-01-2017 ZTE Proprietary and Confidential

NetNumenU31 GPON NBI Reference Manual for TL1

If there is no communication with the TCP connection ， the system will actively
disconnect the TCP connection. This command can maintain the connection without
any other operation.
l Applicable NE

NE Category NE Type Notes

PON OLT C220v1.1/C220v1.2/C300 Series/C300v2 Series/C300v3

Series

PON ONU F820/LAN-MDU Series/xDSL-MDU Series/FTTH ONU

l Command Format
SHAKEHAND:::CTAG::;
l Command Parameter
None
l Response Format
Refer to Section 4.2.2.2 for detailed TL1 command response format.
l Response Parameters
None
l Error Code
None
l Example
Command:
SHAKEHAND:::CTAG::;
Response:
ZTE_10.63.174.210 2012-08-17 15:05:45
M CTAG COMPLD
EN=0 ENDESC=No Error
;
l Average Command Response Time

Scenario Average Response Time (s)

l Notes

Point Details

l Revision History

7-468

|07-01-2017 ZTE Proprietary and Confidential

 Chapter 7 TL1 Command Description

Revision Date Notes

7-469

|07-01-2017 ZTE Proprietary and Confidential