Scribd Logo
Upload

Welcome to Scribd!

  • 9 views

    Moxa Mgate mb3180 mb3280 mb3480 Series Mgate mb3480 Model Qig v7.2

    Uploaded by

    nmtinh

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Moxa Mgate mb3180 mb3280 mb3480 Series Mgate mb3480 Model Qig v7.2

    Uploaded by

    nmtinh
    9 views6 pages

    Original Title

    moxa-mgate-mb3180-mb3280-mb3480-series-mgate-mb3480-model-qig-v7.2

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    9 views6 pages

    Moxa Mgate mb3180 mb3280 mb3480 Series Mgate mb3480 Model Qig v7.2

    Uploaded by

    nmtinh

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 6

    MGate MB3480 Series

    Quick Installation Guide

    Version 7.2, January 2021

    Technical Support Contact Information


    www.moxa.com/support

     2021 Moxa Inc. All rights reserved.

    P/N: 1802034800017
    *1802034800017*
    Overview
    The MGate MB3480 is a 4-port Modbus gateway that converts between
    Modbus TCP and Modbus RTU/ASCII protocols. It can be used to allow
    Ethernet masters to control serial slaves, or to allow serial masters to
    control Ethernet slaves. Up to 16 TCP masters and 124 serial slaves can
    be connected simultaneously.

    Package Checklist
    Before installing the MGate MB3480 Modbus gateway, verify that the
    package contains the following items:
    • 1 MGate MB3480 Modbus gateway
    • Power adapter
    • 4 Stick-on pads
    • Quick installation guide (printed)
    • Warranty card

    Optional Accessory
    • DK-35A: DIN-rail mounting kit (35 mm)
    • Mini DB9F-to-TB Adapter: DB9 female to terminal block adapter
    Notify your sales representative if any of the above items is missing or
    damaged.

    NOTE This product is designed to be powered by a listed power source


    marked "LPS" and is rated 12 to 48 VDC and 0.25 A minimum.
    The device's operating temperature when using the power
    adapter is 0 to 40°C (32 to 104°F), and 0 to 60°C (32 to 140°F)
    when using an alternative DC power source. If you need
    additional assistance purchasing a power source, please contact
    Moxa for more information.

    -2-
    Hardware Introduction
    As shown in the following figures, the MGate MB3480 has 4 DB9 male
    ports for transmitting serial data.

    Reset Button—The reset button is used to load factory defaults. Hold the
    reset button down for five seconds using a pointed object such as a
    straightened paper clip. Release the reset button when the Ready LED
    stops blinking in order to load the factory defaults.
    LED Indicators—Six LED indicators are located on the top panel:

    Name Color Function


    Ready Red Steady on: Power is on and the unit is booting up.
    Blinking: IP conflict exists, or DHCP or BOOTP
    server did not respond properly.
    Green Steady on: Power is on and the unit is functioning
    normally.
    Blinking: Unit has found by the Location
    command in MGate Manager.
    Off Power is off or power error condition exists.
    Link Orange 10 Mbps Ethernet connection.
    Green 100 Mbps Ethernet connection.
    Off Ethernet cable is disconnected or has a short.
    P1/P2/ Orange Unit is receiving data from device.
    P3/P4 Green Unit is transmitting data to device.
    Off No data is being exchanged with device.

    -3-
    Hardware Installation Procedure
    STEP 1: After unpacking the unit, connect the power supply or power
    adapter to the unit. Make sure that the adapter is connected to
    an earthed socket outlet.
    STEP 2: Use a standard straight-through Ethernet cable to connect the
    unit to a network hub or switch. Use a cross-over Ethernet cable
    if you are connecting the gateway directly to a PC.
    STEP 3: Connect your device to the desired port on the unit.
    STEP 4: Place or mount the unit. The unit may be placed on a horizontal
    surface such as a desktop, mounted on a DIN-rail, or mounted
    on the wall.

    Wall or Cabinet Mounting


    Two metal plates are provided for mounting
    the unit onto a wall or inside a cabinet. Attach
    the plates to the unit’s rear panel with the
    provided screws. With the plates attached, use
    screws to mount the unit on a wall.
    Mounting the MGate MB3480 onto a wall
    requires two screws. The head of the screws
    should be 5.0 to 7.0 mm in diameter, the shaft
    should be 3.0 to 4.0 mm in diameter, and the
    length of the screws should be at least 10.5
    mm.

    DIN-rail Mounting
    DIN rail attachments can be purchased separately to mount the MGate
    MB3480 on a DIN rail. When mounting the unit on a DIN rail, make sure
    that it is oriented with the metal springs on top.
    Wall Mounting DIN-rail Mounting

    Termination Resistor and Adjustable Pull High/Low Resistors


    For some RS-485 environments, you may need to add termination
    resistors to prevent the reflection of serial signals. When using
    termination resistors, it is important to set the pull high/low resistors
    correctly so that the electrical signal is not corrupted. For each serial port,
    DIP switches are used for termination resistor and pull high/low resistor
    settings. To enable the 120 Ω termination resistor, set switch 3 on the
    assigned DIP switch to ON; set it to OFF (the default setting) to disable
    the termination resistor. To set the pull high/low resistors to 150 KΩ (the
    default setting), set switches 1 and 2 on the assigned DIP switch to the
    OFF position; set them both to ON for 1 KΩ.

    -4-
    MGate MB3480 DIP Switches

    Pull High/low Resistors for the RS-485 Port

    1 2 3
    SW
    Pull High Pull Low Terminator
    ON 1 KΩ 1 KΩ 120 Ω
    Default OFF 150 KΩ 150 KΩ –

    Software Installation
    You can download the MGate Manager, User's Manual, and Device Search
    Utility (DSU) from Moxa's website: www.moxa.com. Please refer to the
    User’s Manual for additional details on using the MGate Manager and
    DSU.
    The MGate MB3480 also supports login via a web browser.
    Default IP address: 192.168.127.254
    Default account: admin
    Default password: moxa

    Pin Assignments
    Ethernet Port (RJ45)
    Pin Signals
    1 Tx+
    2 Tx-
    3 Rx+
    6 Rx-
    Serial Port (Male DB9)
    RS-422/485 RS-485
    Pin RS-232
    (4-Wire) (2-Wire)
    1 DCD TxD-(A) –
    2 RxD TxD+(B) –
    3 TxD RxD+(B) Data+(B)
    4 DTR RxD-(A) Data-(A)
    5 GND GND GND
    6 DSR – –
    7 RTS – –
    8 CTS – –
    9 – – –

    -5-
    Environmental Specifications
    Power Requirements
    Power Input 12 to 48 VDC
    Power Consumption 385 mA @ 12 VDC, 110 mA @ 48 VDC
    Operating Temperature 0 to 60°C (32 to 140°F)
    Storage Temperature -40 to 85°C (-40 to 185°F)
    Operating Humidity 5 to 95% RH
    Dimensions
    With ears: 35.5 x 102.7 x 181.3 mm
    (1.40 x 4.04 x 7.14 inch)
    Without ears: 35.5 x 102.7 x 157.2 mm
    (1.40 x 4.04 x 6.19 inch)

    -6-

    You might also like