Scribd Logo
Upload

Welcome to Scribd!

  • 4 views

    CE419MAKEUP02

    Uploaded by

    Temam Mohammed
    why 6

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd

    CE419MAKEUP02

    Uploaded by

    Temam Mohammed
    4 views1 page
    why 6

    Copyright

    © © All Rights Reserved

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    why 6

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    4 views1 page

    CE419MAKEUP02

    Uploaded by

    Temam Mohammed
    why 6

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    You are on page 1of 1

    ARBAMINCH WATER TECHNOLOGY INSTITUTE

    DEPARTMENT OF CIVIL ENGINEERING


    Make-up Examination: CE 419 Reinforced Concrete Design II Date ________
    Sections: G4H & G4I Ac.Year 2002/03 Time: 3 Hrs
    Max. Mark: 70
    Instructions: Examination is open exercise book
    Assume suitable data if necessary

    Q1. The floor system shown below is subjected to 6 KN/m2 live load. Partition and finishing
    contributes load of 3 KN/m2. Using C-30, S-400 and class I work, determine.
    (a) The thickness of the slab.
    (b) The design moments of the floor system.
    (c) The positive reinforcement of panel 3. (20 Pts)

    - Column
    Panel 5 6m - Beam
    - Slab
    3m Panel 1 Panel 2 Panel 3 Panel 4

    3m 4.5 m 4.2 m 3.6 m

    Q2. The slab shown below is subjected to a UDL of 8 KN/m2. If it is isotropically reinforced,
    determine the ultimate moment of resistance m per unit length of yield line balancing the UDL.
    The positive ultimate resisting moment is m and the negative ultimate resisting moments are 1m
    and 2m as indicated in the pictures. Take 1 = 0.5 and 2 = 0.2 (20 Pts)

    1m
    6m 1m m
    1m
    1m
    m
    2m
    1m
    8m 2m
    1m
    Q3. Show the yield line patterns for the following slabs. (10 Pts)

    (a) (b) (c)

    Q4. A rectangular tank of capacity 169 m3 with 770 X 570 cm internal base dimension is to be
    constructed. If the tank is a hinged base, free top and continuous sides, determine:
    (a) the moment and shear distributions in the tank.
    (b) the main reinforcement at the mid-height corner of the tank.
    Use fcu = 35 MPa and fy = 460 MPa (20 Pts)

    Examiner: Mekonnen D.

    You might also like