This drawing is for information only and must not be used

for construction or fabrication, prior to final design.

Palfinger Ned-Deck reserves the right to
change the product design, materials, and
specifications without incurring obligations.
Responsibility for the use and application of
the product rests with the user.

Z
Y
4622

Y
X

X
Z

4141
= 600 =
= 380 =

2831
Approx. 2235
645
590
483

Approx. 1048
= 280 =
SECTION A-A
A A

20
Approx. distance C.O.G. = Hook distance / 2,8
324 Hook distance 760 1942 645

Approx. 2778 Approx. 478

Deck forces for each flange plate:
Fx 20 kN System data System data Winch data Davit data

Name
TITLE:
Fy 20 kN FPG 120-2 LH

GB
GB

SH
SH
System FPG 120 System FPG 120
Fz 100 kN Manufacturer Palfinger Ned-Deck S.W.L. Per arm 60 kN
SWL (total of two lifting points) 120 kN SWL (total of two lifting points) 120 kN DRAWN: TOLERANCES:

07.07.'14 Weight update

Mx-x 190 kNm Workshop test (static) SH

25.06.'14 System data

Maximum Recovery Load (total of two lifting points). 94.7 kN Maximum Recovery Load (total of two lifting points). 94.7 kN
Winch type Winch 15

04.12.'13 add C.O.G.

132

Description
kN

07.04.'14 deckforces
My-y 10 kNm 2,2 x S.W.L.
DATE:
02-09-13 NEN-ISO 2768-1
Recovery speed 5.4 m/min Recovery speed 18 m/min

Maximum Manual Recovery Load (total of two lifting points). 94.7 kN Maximum Manual Recovery Load (total of two lifting points). 94.7 kN Wirerope diameter 16 Board test (dynamic) APPROVED:
-
PROJECTION:

All forces are static calculated per davit arm, taken under 10°/20° acc. SOLAS mm 1,1 x S.W.L. (lowering only) 66 kN
Minimum Launching Load (total of two lifting points). N.A. Minimum Launching Load (total of two lifting points). N.A. SCALE:
All forces are action forces on deck (section A-A). 1:20
Lowering height 42.9 m www.palfingerneddeck.com
Total mass approx.: 8100 kg
Winch Manufacturer and type PND 15-03 L Winch Manufacturer and type PND 15-01 R

Rev Date
Deckforces including 10% additional crane weight because of assuming the c.o.g. Cylinder Manufacturer and type N.A. Cylinder Manufacturer and type N.A.
DRAWING NUMBER: SIZE: REVISION:

This drawing is the property of PALFINGER NED-DECK BV The Netherlands

3A-105232 A1 D

C
B
A
D
It may not be copied or shown to any third parties.
File: 3A-105232D