Scribd Logo
Upload

Welcome to Scribd!

  • 3 views

    TSS-TS-BAL F002F20049: For Field Service Only

    Uploaded by

    Gowtham
    Pop

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    TSS-TS-BAL F002F20049: For Field Service Only

    Uploaded by

    Gowtham
    3 views1 page
    Pop

    Original Title

    049

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Pop

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    3 views1 page

    TSS-TS-BAL F002F20049: For Field Service Only

    Uploaded by

    Gowtham
    Pop

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Test Specifications

    (Subject to alterations
    For Field Service only
    REFERENCE NO : TSS-TS-BAL F002F20049 TESTING (DELIVERY VALUES)

    Edition : 11.2013 SETTING POINT


    Replaces (edition) : - Speed - min-1 (rpm) : 1200
    Test oil : F 002 S3E 001-H-S/EFEP 170 Delivery quantity : 10.75 ± 0.75 (±1.5)
    in cm³ /500 strokes
    Injection pump : F 002 F20 049-E041.272.900 Control rack position in mm : minus 2.5 mm
    PFR 1K .. (from the locked "0" position towards stop position)
    CHECKING POINT
    -1
    Speed - min (rpm) : 1700
    Customer : Bajaj Auto Ltd. Delivery quantity : (4.75 - 7.75)
    Engine model : 6 kW & 6.5 kW (Kubota BS III) in cm³ /500 strokes
    Application : Bajaj 3-wheeler Control rack position in mm : minus 3.5 mm
    RE 445 Maxima,RE 445 Optima (from the locked "0" position towards stop position)
    & RE 445 Compact
    TEST BENCH REQUIREMENTS Speed - min-1 (rpm) : 800
    Delivery quantity : (6.0 - 9.0)
    o o
    Test oil inlet temperature : 38 - 42 C in cm³ /500 strokes
    Inlet pressure in bar : 1.0 ±0.1 Control rack position in mm : minus 2.5 mm
    Test injector : 0 681 343 009 (from the locked "0" position towards stop position)
    Opening pressure in bar : 172 - 175
    High pressure pipe : 6 x 2 x 600 Speed - min-1 (rpm) : 100
    (OD x ID x length) in mm Delivery quantity : Minimum 13.75
    in cm³ /500 strokes
    Direction of rotation : Clockwise Control rack position in mm : "0" mm
    (in the locked position)
    Pre-stroke in mm @ : 3.15 - 3.25 (3.10 - 3.30)
    Control rack position in mm : 0
    ( locked "0" position - cambox mid reference)

    ATTENTION : @ : Inlet pressure and quantity of test oil must be as minimum as possible for checking pre-stroke

    Note:
    1. Values given in brackets are overchecking values

    Set the control rack position to "0" (zero) at locked position (cambox mid reference)

    Applicable only for BOSCH and MICO test benches 181113


    These Test specifications should not be copied or transmitted to a third party without our written permission. All rights reserved.

    You might also like