Scribd
Upload
97 views11 pages

蒙泰排版教程MainTop typesetting tutorial

Uploaded by

kacare
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
97 views11 pages

蒙泰排版教程MainTop typesetting tutorial

Uploaded by

kacare
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 11

蒙泰排版教程

MainTop typesetting tutorial


1、打开蒙泰，点击左上角文件→建立新文件→确认建立新文件。

1.Open MainTop, click File in the upper left corner→NEW→ OK, Create a new

file.

2、点击文件→载入图片，载入需要排版打印的图片。

2. Click File → Import picture, Load images that need to be typeset and printed.
3、点击定位显示面板，再点击图片，可以显示图片的宽和高。

3.Click the Show Metric Panel, and then click the image to display the width and

height of the image.

4、点击图片，然后右击，点击图片框属性可以修改图片大小。修改图片宽度后，

再点击保持图片纵横比，图片高度会按照比例自动修改。

4.Click the image, then right-click, and click the Frame Attribution to modify the

image size. After modifying the width of the image, click to Constrain Proportion,

and the height of the image will be automatically modified according to the

proportion.
5、点击图片，然后按 Ctrl + D 可以复制图片，按一次复制一份图片。

5.Click on the picture and press Ctrl+D to copy the picture, press to copy one

picture at a time.

6、点击显示靠齐与分布面板，弹出靠齐与分布小弹窗设置图片的对齐方式。

6.Click Show Alignment & Distributing Panel, Pop-up snap and distribute small

pop-ups to set the alignment of the image.


7、全选图片，点击 1 处，所有图片向上对齐。点击 2 处，修改图片横向间距，

再点击 3 处，图片按设置的间隔排列。如图，现在图片与图片之间的左右

间距是 5mm。

7.Select all images, click 1, all images are aligned up. Click 2 places to modify the

horizontal spacing of the images, and then click 3 places to arrange the pictures

according to the set interval. As shown in the figure, now the left and right

spacing between the pictures is 5mm.

8、全选图片，然后点击 1 处，图片向左对齐。点击 2 处，修改图片纵向间距，

再点击 3 处，图片按设置的间隔排列。如图，现在图片与图片之间的上下

间距是 5mm。

8.Select all images and click 1 to align the image to the left. Click 2 places to

modify the vertical spacing of the images, and then click 3 places to arrange the

images in the set interval. As shown in the figure, now the upper and lower

spacing between the pictures is 5mm.


9、全选图片，然后右击，再点击成组，就可以把所有图片组成一个组合。

9.Select all images, then right-click, and click Group to group all the images into a

group.

10、成组之后如果想解散图片组合，点击图片，再右击，点击解组，就可以解

散图片组合。

10.After grouping, if you want to dissolve the picture group, click the image, then

right-click, click Ungroup, you can dissolve the picture group.


11、点击图片，然后文件→纸张设定可以设置纸张大小，纸张大小不能小于图

片大小，可以根据定位面板的图片大小，设置纸张大小。现在图片大小是

199.9826mm*111.5106mm，纸张大小就可以设置为 200mm*112mm。

11.Click the picture, and then the file → paper settings can set the paper size, the

paper size cannot be smaller than the picture size, and the paper size can be set

according to the picture size of the positioning panel. Now the picture size is

199.9826mm*111.5106mm, and the paper size can be set to

200mm*112mm.
12、图片居中纸张。点击图片，点击 1，上下居中。点击 2，左右居中。

12.The picture centers the paper. Click on the image, click 1, and center

it up and down. Click 2 to center left and right.


13、图片排版好后点击打印图标，进入打印设置。

13.After the image is typeset, click the print icon to enter the print settings.

14、进入打印设置后，点击打印机设定→自动设置纸张→确认→打印到文件。

14.Once in the print settings, click Printer Settings → Set Paper Automatically →

OK → print to file.
15、点击打印到文件后，选择保存路径，自定义文件名，再点击保存。

15.After clicking Print to file, select a save path, customize the file name, and

then click Save.


16、打开打印软件，点击文件，找到蒙泰排版完成的图片，右击添加倒打印列

表。

16.Open the printing software, click File, find the finished picture of MainTop

typesetting, right-click to add the reverse print list.

17、点击打印后，在打印任务列表中，右击打印任务，点击任务设置，进入任

务设置。

17.After clicking Print, in the print task list, right-click the print task and click

Task Settings to enter the task settings.

18、进入任务设置后，勾选连晒打印，编辑纵向幅数的数字，可以设置打印份
数，编辑纵向间距的数字，可以设置每份图片的纵向间距，设置完成后点击 ok。

如图，纵向幅数设置为 2，纵向间距设置为 1mm。

18.Once in the task settings, selected Copy, edit the number for Y count, you can

set the number of copies, edit the number of Y count, you can set the vertical

spacing of each picture, and click OK after setting. As shown in the figure, Y

count is set to 2, and Y count is set to 1mm.

You might also like