1 2 3 4 5

NOTES:

A-BEAMS DETAILS

0.33 L2 GREATER OF GREATER OF

70 Ø OR 1.00 L1 0.33 (L2 OR L3) 0.33 (L2 OR L3) 0.25 L3 40MM. CLEAR COVER FIRST LAYER OF TOP BARS
(CONTINUOUS CORNER BARS;

D BAR
GREATEST
D BAR
SCHEDULE OF BEAMS & GIRDERS (TYP.)
REMAINING BARS CONTINUOUS
MAXIMUM NO. OF BARS AS A SINGLE LAYER IN BEAM STEMS
E BAR OR EXTRA BARS
SYMMETRICALLY PLACED) BEAM WIDTH "W" MM
C BAR C BAR C BAR SLAB (WHERE BAR DIA.MM
SIZE BOTTOM BARS TOP BARS STIRRUPS
OCCURS) 200 250 300 350 400 450 500 550 600 650 700 750
MARK REMARKS
W H A B C D E @ SUPPORT @ MIDSPAN 12 3 4 5 6 7 8 10 11 12 13 15 16
0.125 L2 0.125 L2 0.125 L3 0.10 L3
SECOND LAYER TOP BARS 14 3 4 5 6 7 8 10 11 12 13 15 16
B1
(REMAINING EXTRA BARS 16 3 4 5 6 7 8 10 11 12 13 15 16
STIRRUPS @SUPPORT/MIDSPAN B2 SYMMETRICALLY PLACED)
STIRRUPS @SUPPORT STIRRUPS @MIDSPAN STIRRUPS @SUPPORT STIRRUPS @SUPPORT STIRRUPS @MIDSPAN STIRRUPS @SUPPORT 18 2 3 4 6 7 8 9 10 11 12 14 15
Ø12 WEB BARS
B3 EF @ 300 VERT. SECOND LAYER OF BOTTOM BARS 20 2 3 4 6 7 8 9 10 11 12 14 15
A BAR A BAR
D A BAR B BAR EMBEDMENT LENGTH B BAR
SPACING (CLASS
B SPLICE)
(REMAINING EXTRA BARS
SYMMETRICALLY PLACED) 22 2 3 4 5 6 7 8 9 10 11 12 13
D
(SEE GENERAL NOTES)
2 3 4 5 6 7 8 9 10 11 12 13
L1 L2 L3
CAMBER NOTES: FIRST LAYER OF BOTTOM BARS
(CONTINUOUS CORNER BARS;
25

28 1 2 3 4 5 6 7 8 9 9 10 11
1. UNLESS OTHERWISE INDICATED, FOR BEAMS WITH SPAN EQUAL TO OR EXCEEDING 8.00 M PROVIDE MINIMUM CAMBER REMAINING BARS CONTINUOUS
CANTILEVER CLEAR SPAN INTERIOR CLEAR SPAN EXTERIOR CLEAR SPAN OR EXTRA BARS
OF 1/500 OF THE SPAN, AT THE MID SPAN OF BEAM. Ø25 SPACER 32 1 2 3 4 5 6 6 7 8 9 10 10
@ 1000 (TYP.) SYMMETRICALLY PLACED)
2. CANTILEVER BEAM OF ANY SPAN SHALL BE PROVIDED WITH CAMBER OF 1/150 OF SPAN AT THE FREE END.
TYP.BEAM ELEVATION 3. THE ANTICIPATED SHORTENING AND SETTLEMENT OF FORM SUPPORTS WHILE CARRYING CONCRETE, MUST BE ADDED TO THE TYP.CROSS - SECTION FOR
A-1 FOR SEIMIC CATEGORY A,B ABOVE VALUES OF CAMBER.
A-2 A TWO ROWS BAR PLACING IN A BEAM
G-S003 N.T.S. G-S003 N.T.S.

OPENING
NOT LESS THAN 0.25 CLEAR SPAN ADDITIONAL T20 TOP & BOTTOM MAX. SIZE
0.15 L3 600 MIN. OF HOLE (MIN. 2 BARS T & B) 300 dia.
AND NOT LESS THAN 2 TIMES BEAM DEPTH ADDITIONAL ADDITIONAL T20 TOP & BOTTOM
ADDED SUPPORT BARS (SAME AS BEAM REINF.) BUT NOT LESS
TIES SAME AS BEAM TIES OF HOLE (MIN. 2 BARS T & B)
E BAR NOT LESS THAN BEAM DEPTH THE SUPPORT BARS ARE NOT REQ'D WHEN THAN DEPTH
BEAM WIDTH IS NOT LARGER THAN 150mm OF BEAM CONCRETE COLUMN
600 600 OR WHEN BEAM REINF. CAN PROVIDE SUPPORT MAX. SIZE
C BAR TIES EACH SIDE OF SLEEVE. 300x600

BEAM DEPTH (D)

BEAM WIDTH
CLOPENING

KEY SHALL BE FULL WIDTH 0.10 L3

MAIN REINF.
OF BEAM OR GIRDER (FOR
(SEE DESIGN DWG.) SLEEVE OR BOX OPENING
LOCATION SEE GENERAL 100 MIN OR D/3 300
NOTES ON A BAR T&B
ELEVATION MAIN BEAM
B BAR
50
COLUMN
D = BAR DIAMETER
D = 6d FOR Ø10 THROUGH Ø25 75mm
ADDITIONAL 1-Ø12
AROUND OPENING
Ld Ld
(TYP.)
600 MIN.
100 MIN. OR D/3
T&B
TYP. EACH FACE OF BEAM ADDITIONAL COLUMN BUT NOT LESS
D = 8d FOR Ø28, Ø32, Ø36 HALF SPACING
. OF
2Ø16 E.F. 0.50 SUPPORTED T10 TIES THAN D
BEAM TIES
STIRRUPS @SUPPORT STIRRUPS @MIDSPAN STIRRUPS @SUPPORT NOTES
BEAM DEPTH
BEAM OR GIRDER L3
BEAM
( A ) PLAN - VERTICAL HOLES IN BEAM ( B ) ELEVATION - FOR HORIZONTAL HOLES IN BEAM 1. NO HOLES LARGER THAN 100 DIA.
SHALL BE PERMITTED IN BEAMS,
A-3 CONSTRUCTION JOINT DETAIL EXTERIOR CLEAR SPAN
Ø75mm
2. UNLESS SPECIFICALLY INDICATED
G-S003 N.T.S. ON STRUCTURAL DRAWINGS.

TYP.BEAM ELEVATION A-5 STANDARD HOOK DETAIL A-6 TYP. VERTICAL SLEEVE IN A BEAM A-7 DETAIS OF OPENING IN CONCRETE BEAM
3. ALL BEAM REINFORCEMENTS TO
RUN THRU UNDISTURBED.
G-S003 NTS
A-4 .(SIMPLY SUPPORTED) G-S003 NTS G-S003

G-S003 N.T.S.

C B- SUSPENDED SLABS DETAILS C

SCHEDULE OF SLABS
REINFORCEMENT

THICK- SHORT SPAN LONG SPAN

MARK NESS TOP BARS TOP BARS REMARKS
(t) BOTTOM BARS BOTTOM BARS 100 (MAX)
CONT. EDGE DISC. EDGE CONT. EDGE DISC. EDGE

0.10 L1 OR 45 Ø 0.25 (L1OR L2) 0.25 (L1OR L2) SIZE SPACING SIZE SPACING SIZE SPACING SIZE SPACING SIZE SPACING SIZE SPACING INTERRUPTED
600

(MIN)
GREATER GREATER BARS

600
GREATER MINIMUM CLEARANCE
(MIN)
S1
EXTRA TOP AND BOTTOM BETWEEN SLEEVES
TOP BARS (SEE SCHED.) BARS BE EQUAL TO THE 100"D" < 155 E ISSUED FOR CONSTRUCTION AUG. 2022
S2

600
NUMBER AND SIZE OF 155"D" > 155 D ISSUED FOR TENDER FEB. 2022 MOHO KHT
OPEN EXTRA TOP AND BOTTOM
BARS INTERRUPTED BY C DESIGN DEVELOPMENT STAGE (SE & MEP) NOV. 2021 MOHO KHT
BARS BE EQUAL TO THE
NOTES: NUMBER AND SIZE OF
OPENINGS. PLACE ONE
TWO DIAGONAL B SCHEMATIC DESIGN STAGE (SE & MEP) OCT. 2021 MOHO KHT
T

HALF EACH SIDE. USE A SCHEMATIC DESIGN STAGE (SE & MEP) AUG. 2021 MOHO KHT
BARS INTERRUPTED BY BARS (SAME
* IF THE TOP REINFORCEMENT OF TWO ADJACENT PANELS IS DIFFERENT THE HIGHER 2 Ø16 MIN. FOR TOP REV. ISSUED FOR DATE BY CHECK
150 (MIN) OPENINGS. PLACE ONE SIZE AS MAIN
VALUE OF REINFORCEMENT IS ADOPTED OF THE TWO PANELS ( E.G Ø10 @ 150 (520 MM2/M) ADJACEMNT L/5 AND BOTTOM BARS.
BOTTOM BARS (SEE SCHED.) TWO DIAGONAL HALF EACH SIDE. USE REINFORCEMENT)

60
EXTEND BOTTOM BARS REVISION SCHEDULE

0
BARS X 1200 LONG

60
TO Ø12 @ 200 (565 MM2/M) USE Ø12 @ 200 FOR BOTH) 2 Ø16 MIN. FOR TOP
(SAME SIZE AS MAIN 600 600 150mm INTO BEAM, GIRDER
AND BOTTOM BARS. INTERRUPTED
* FOR SLABS WITH THICKNESS MORE THAN 150MM INTERMEDIATE AREAS NOT COVERD WITH TOP REINFORCEMENT) (MIN) (MAX) OR SHEAR WALL SUPPORT. KEY PLAN
EXTEND BOTTOM BARS BARS
L1 L2
150mm INTO BEAM, GIRDER

M NOR
REINFORCEMENT SHALL BE REINFORCED WITH TOP SHRINKAGE REINFORCEMENT Ø10@200 E.W. BOTTOM BARS

AG TH
NE
TOP BARS OR SHEAR WALL SUPPORT.

L/5

TIC
RECTANGULAR OPENING CIRCULAR OPENING

N
ROUGHEN SURFACE
FIRST POUR
B-1 TYPICAL SLAB ON BEAM DETAIL SLAB REINF. NOTES
SUSPENDED CONCRETE
G-S003 1. WHERE L IS THE LONGER SPAN OF THE CORNER PANNEL.
N.T.S.
2. TOP AND BOTTOM BARS ARE OF THE SAME ORDER AND B-4 SLAB OPENING
SPACING AS OF THE MAXIMUM MAIN BOTTOM BARS IN G-S003 N.T.S.
THE PANNEL.
DN
DN

B-2 TYP.CONSTRUCTION JOINT B-3 SUSPENDED SLAB CORNER DETAILS

G-S003 (ADDITIONAL REINFORCEMENT)
G-S003 N.T.S.

C-REINFORCED CONCRETE WALLS DETAILS CLIENT:

B HORIZONTAL REINFORCEMENT TO SCHEDULE

HORIZONTAL REINFORCEMENT
TO SCHEDULE
HORIZONTAL REINFORCEMENT TO SCHEDULE
1 B
VERTICAL REINFORCEMENT TO SCHEDULE -
VERTICAL REINFORCEMENT TO SCHEDULE
VERTICAL REINF. CUT VERTICAL REINFORCEMENT PROJECT NAME:
TO SCHEDULE MINIMUM 50 BAR DIA. MINIMUM 50 BAR DIA.
VERTICAL REINF. CUT LARGER DIAMETER VERTICAL BARS, EQUAL IN AREA BUT NOT LESS THAN 1000 BUT NOT LESS THAN 1000
LAP LENGTH T20 TO THE NUMBER OF BARS CUT AND DISPLACED. 50% VERTICAL BARS DISPLACED
ADDITIONAL VERTICAL REINFORCEMENT EQUAL TO THE . PLACED AT EITHER SIDE OF OPENING LENGTH TO BE U-BARS ADDITIONAL BARS
LAP LENGTH No. OF BARS CUT. 50% PLACED AT EITHER SIDE OF STORY HEIGHT. (AS PER SCHEDULE) (SEE DETAILS)
OPENING. LENGTH TO BE OPENING DEPTH PLUS 2xLAP ADDITIONAL T20 EF
2x2T16
LENGTH.
VERTICAL U-BARS 1 DIAGONAL BARS
2 nos. SAME AS
HORIZ. U-BARS TO CUT HORIZ. REINFORCEMENT
HORIZ. U-BARS TO CUT T12-EF RAKED BARS -
WALL VERT. BARS
DESIGN OF COMMERCIAL, RESIDENTIAL
HORIZ. REINFORCEMENT HORIZONTAL BARS & ADMINISTRATION COMPLEX
AS PER SCH.
LAP LENGTH LAP LENGTH U-BARS CAIRO GATE - EL SHEIKH ZAYED
(AS PER SCHEDULE) GIZAH - EGYPT
LAP LENGTH U-BAR .
LAP LENGTH TOP 4 T 20 BUILDING NAME:
REINFORCEMENT
OR AS PER SCH. VERTICAL BARS AS PER
T16-EF RAKED BARS SCHEDULE.
NOTES: NO
T
BOTTOM 4 T 20 UT AP
L IA. B 00
LAP LENGTH T12-EF RAKED BARS LAP LENGTH 1. LENGTH OF TRIM
REINFORCEMENT D 0 GENERAL DRAWINGS
AR AN 1
(TYP.)
MINIMUM CLEARANCE
600

BARS = D + 1200 B
VERTICAL U-BARS BETWEEN SLEEVES OR AS PER SCH. 50 S TH
2. OMIT TRIM BARS FOR N. S
VERTICAL REINF. CUT 100 FOR "D" <155 EQ. EQ. MI LE
155 FOR"D" >155
SINGLE OPENING WHEN TYPICAL DETAIL OF ADDITIONAL REINF. DIAGONAL BARS
DESIGNER:
D < 155
C-4 @ WALL DOOR OR WINDOWS OPEINING 2 nos. SAME AS
Bays Water Tower,Business Bay Office 1910
P.O.Box 57004 Dubai-UAE
WALL VERT. BARS
OPENINGS UP TO AND INCUDING 250mm DIA. G-S003 NTS Tel: +971(0)44516868
C-1 OPENINGS BETWEEN 250mm & 800mm WIDTH C-2 OPENINGS OVER 800mm WIDTH C-3 OR RECTANGULAR WIDTH NOT EXCEEDING 250mm Fax: +971(0)44516969
E-mail: [email protected]
G-S003 NTS G-S003 NTS G-S003 NTS URL: www.whitespcae.ae

INTERIOR DESIGN CONSULTANT:

Gensler architecture, design, and planning firm
Alserkal Avenue, Warehouse 12, Al Quoz 1
20 x 30 NET POUR RC WALL RC WALL
CLASS B SPLIC VERTICAL BARS (EF) (AS VERTICAL BARS (EF) (AS PO Box: 58527 Dubai, UAE
WATERSTOP
CLASS B SPLICE

STRIPS AT EXPOSED (SEE SPLICE SCHD.) PER SCHEDULE) Tel.: +971 (0)4 356 1300
CONSTRUCTION JOINT PER SCHEDULE) LAP TW TENSION LAP
WHERE REQUIRED URL: https://www.gensler.com/
CONCRETE WALL FACE
CLASS B SPLICE

TENSION LAP U-BARS TW=THICKNESS OF WALL

TO BE REMOVED BEFORE NOTE : LANDSCAPE CONSULTANT:
DOOR OPENING AS SHOWN
75

PLACING CONC. ABOVE DENOTES THE LOCATION OF LINKS Rabben/Herman design office
AT WALLS, ADD TIES AT WALL ENDS ON DRAWINGS. Landscape Architecture, Urban Design & Master Planning
STRAIGHT BARS
SIZE & SPACING AS 833 Dover Drive, Suite 9 Newport Beach, California, 92663

TW
SANDBLAST TO 4 Ø16 VERTICAL
PER SCHEDULE
EXPOSE AGGREGATE
BEND BARS
BARS EXCEPT BARS SAME
U-BARS TIES AT WALL ENDS TYPICAL DETAIL OF SHEAR WALL Tel: +19495483459
E-mail:[email protected]
WHERE WALL SPACING AS HORIZONTAL BARS (EF) HORIZONTAL BARS (EF)
AND CLEAN OTHERWISE NOTED SIZE & SPACING AS C-5 AT DOOR OPEINING URL://www.rhdo.com/
TENSION LAP
TENSION LAP

IS DISCONTINUOUS HOR. BARS (AS PER SCHEDULE) (AS PER SCHEDULE)

PER SCHEDULE
VERTICAL BARS (EF)

PLAN G-S003
(AS PER SCHEDULE)

CONSULTANT:
VERTICAL BARS (EF)
(AS PER SCHEDULE)

NTS
HORIZONTAL PLAN U-BARS TIES AT WALL INTERSECTIONS WALL REINFORCEMENT
(SEE SPLICE SCHD.)

DOWELS TO MATCH
CLASS B SPLICE

SIZE & SPACING AS PER COLUMN

CONTROL JOINT
VERT. REINF. UNLESS ALTERNATE BEND SCHEDULE RC WALL END OR AT EDGE OF 4 T 20 ADDITIONAL
TOP SPANDREL
REINFORCEMENT
A 40 x 75 CONSTRUCTION
KEY WITH WATERSTOP 40
LOCATED BETWEEN
COLUMNS OF
OTHERWISE NOTED HORIZONTAL BARS (EF)
(AS PER SCHEDULE)
HORIZONTAL BARS (EF)
C-11 DOOR OPENINGS
G-S003 NTS
BARS OR AS PER
SCHED.
AS PER SCH. A
WHERE OCCURS CONSTRUCTION JOINT (AS PER SCHEDULE) WALL / COLUMN JUNCTION
BASEMENT WALL
AT WALLS, ADD WHERE WALL HORIZ. REFT. IS LAPPED AT COLUMN ZFP PROJECT NO.:
TIES AT WALL ENDS C20-00800
1 Ø16 VERTICAL 100 SIZE & SPACING AS PER

TOP OF FOOTING
BARS EXCEPT
RC WALL @ CORNER RC WALL @ JUNCTION C-10 TYPICAL DETAILS OF RC WALLS @ COLUMNS SCHEDULE
DIAGONAL BARS
PM: GASA PA: HLMH HV: SHMO LC: KMFM
OTHERWISE NOTED G-S003 NTS T12-150
4 nos. SAME AS

100/200
CLASS B PD: WSA ID: ----- PG: MMER CE: -----
WALL REINFORCEMENT
(SEE DESIGN DWG.)
LAB SPLICE PLAN PLAN WALL VERT. BARS
LS: RHDO SE: MOHO HC: MFMT WU: -----
VERTICAL EMBEDMENT LENGTH BEND AS REQUIRED 2T12 TITLE:
U-BARS AS PER
TYPICAL DETAILS OF RC WALLS R8-200
CONC.WALL CONSTRUCTION TYPICAL DETAILS OF RC WALLS
C-9 OF WIDTH EQUAL OR MORE THAN 300 mm
SCHEDULE
BOTTOM REINFORCEMENT
C-6 & CONTROL JOINT DETAIL C-7 TYP. RC WALL VERTICAL REINF.DETAIL C-8 OF WIDTH LESS THAN 300 mm G-S003
RC WALL END OR AT EDGE OF 1 SECTION 4 T 20 OR
NTS AS PER SCH.
G-S003 N.T.S. G-S003 N.T.S.
G-S003 NTS C-12 NIB FOR DOOR OPENINGS C-6 DOOR OPENINGS G-S003 SCALE: NTS
G-S003 NTS G-S003 NTS WALL WIDTH STANDARD DETAILS (2/4)

SCALE: SHEET NO.: SHEET REVISION:

E00
REV. DATE:
N.T.S. G-S003
29 AUG. 2022

1 2 3 4 5 20220829