Scribd Logo
Upload

Welcome to Scribd!

  • 2 views

    WPS - 03a - 2

    Uploaded by

    anand

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    WPS - 03a - 2

    Uploaded by

    anand
    2 views1 page

    Original Title

    WPS -03A- 2

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    2 views1 page

    WPS - 03a - 2

    Uploaded by

    anand

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    ORBITAL FABRICATION & INTEGRATION SERVICES LLC

    WELDING PROCEDURE SPECIFICATION (WPS)


    WPS IN ACCORDANCE WITH :ASME SEC IX,ASME B 31.3,SP-1173
    WPS No.: OFIS/WPS/02A

    POSITION (QW-405) POST WELD HEAT TREATMENT (QW-407)

    Position Of Groove : ALL POSITION Temparature Range : NONE

    Welding Progression : UP ✔ DOWN −−−− Time Range : NONE

    Position Of Fillet : ALL POSITION Heating Range : NONE

    Cooling Range : N/A


    PRE-HEAT(QW-406) GAS (QW-408)
    Ambient Temp. : > 5°C Percent Composition
    Purpose Gas(es) FLOW RATE
    Pre-Heat temp.Min. : 28° C (Mixture)

    Interpass Temp. Max : 150°C Shielding: ARGON 99.99% 20-25 LPM


    Temp.Monitoring method : IR Thermo Meter Trailing: N.A N.A N.A
    Backing:
    Pre-Heat Maintenance : NONE ARGON 99.99% 22-26 LPM
    (Note :
    (CONTINUOUS OR SPECIALHEATING WHERE APPLICABLE SHOULD BE RECORDED)
    ELECRICAL CHARACTERISTICS(QW-409)

    FILLER METAL CURRENT & CURRENT(I) VOLTAGE(V) TRAVELL SPEED HEAT INPUT
    PROCESS
    WELD LAYERS(S) Class Dia POLARITY Ampere Range Voltage Range mm/Minute KJ/mm
    ROOT GTAW ER 316 L 1.6 mm DCEN 56-60 9-11 50-75 0.60 - 0.52
    COLD PASS GTAW ER 316 L 1.6 mm DCEN 56-60 9-11 50-75 0.60 - 0.52
    FILL GTAW ER 316 L 2.4mm DCEN 60-80 9-12 50-100 0.64 -0.57
    CAP GTAW ER 316 L 2.4 mm DCEN 60-80 9-12 50-100 0.64 -0.57

    Pulsing Current AC or DC : DC Volt Range : 9-12 V Heat Input(Max) : 1.15 KJ/mm


    Amps. Range : 56-80 Amps Polarity : DCEN

    Tungsten Electrode Size & Type : 2.4 mm EWTh 2-SFA 5.12(PURE TUNGSTEN 2% THORIATED,ETC)

    Mode Of Metal Transfer For GMAW : N.A(SPRAY ARC SHORT CIRCUITING ARC ETC)

    Electrode Wire feedSpeed Range : N.A


    TECHNIQUE(QW-410)
    String or Weave Bead : String Root & Others Weave

    Tack welding Mtarial Bridge/ Bar (Use SS), Tack welds shall not encroach root area
    Tack Welding Parameters Same as fill pass
    Method of Tack Removal Light Grinding
    Oscillation Not Applicable
    Tube to Work Distance : Not Applicable
    Orfice ,Cup or Nozzle size : Not Applicable
    Single / Multiple Electrodes : Single
    Single Pass or Multiple Pass (Per side ) Multiple Pass
    Single or Multiple Layer(for Clad/HF) : Not Applicable

    Electrode Spacing : Not Applicable


    Closed Chamber / Out Of Chamber None
    Use of Thermal Processes : Not Applicable
    Method of Cleaning : Wire Brushing / Grinding
    Method of Back Gauging : Not Applicable
    Penning : None

    ORBITAL FABRICATION & INTEGRATION SERVICES LLC CLIENT-

    Name: ANAND.D Name:

    Signature: Signature:

    Date: 25-05-2023 Date:


    DOC. NO.-OFIS/WPS/03A REV:-01 DATE:-31-07-24 PAGE:-2 OF 3

    Doc.Format Ref:-OFIS-MEC-F-48

    You might also like