Flash Distillation - Mass Transfer Solved Problems - Msubbu
Flash Distillation - Mass Transfer Solved Problems - Msubbu
Flash Distillation
Home -> ChE Learning Resources -> Solved Problems -> Mass Transfer->
A feed of 50 mole % hexane and 50 mole % octane is fed into a pipe still through a pressure reducing valve and then
into a flash disengaging chamber. The vapor and liquid leaving the chamber are assumed to be in equilibrium. If the
fraction of the feed converted to the vapor is 0.5, find the compositions of the top and bottom products. The following
table gives the equilibrium data for this system.
Mole fractions of hexane in liquid x 1.00 0.69 0.40 0.192 0.045 0.00
Mole fractions of hexane in vapor y 1.00 0.932 0.78 0.538 0.1775 0.00
Calculations:
F = 100 mol
zF = 0.5
W = F - D = 50 mol
With these data, the equilibrium curve and operating line for flash distillation are plotted as follows:
From the plot, it could be seen that the operating line cuts the equilibrium curve at the point (0.31, 0.69). That is yD = 0.69 and xW
= 0.31
https://msubbu.in/sp/mt/FlashDistillHexane.htm 1/2
4/16/22, 2:37 PM Flash Distillation - Mass Transfer Solved Problems - msubbu
https://msubbu.in/sp/mt/FlashDistillHexane.htm 2/2