SS SDF W.o-1, Bill No.-4
SS SDF W.o-1, Bill No.-4
SS SDF W.o-1, Bill No.-4
Sl. No Upto Previous R.A. Bill Upto Date R.A. Bill Present R.A. Bill
Description of works UNIT Rate (Rs.)
Quantity Amount(Rs.) Quantity Amount(Rs.) Quantity Amount(Rs.)
1 2 3 4 7 8 9 10 11 12
1
Taking out vitrified / ceramic / Mirzapur or glazed porcelain tiles with
morters carefully by chiselling from walls or floor and disposal of the
same beyond the compound, in conformity with the Municipal / sqm 83.84 712.502 59736 944.218 79163 231.716 19427
Corporation Rules for such disposal, loading into truck and cleaning the
site in all respect as per direction of Engineer in charge. At all floors.
2 Supplying, fitting & fixing 1st quality Ceramic tiles in walls to match with
the existing work & 4 nos. of key stones (10mm) fixed with araldite at
the back of each tile & finishing the joints with white cement mixed with
colouring oxide if required to match the colour of tiles including
roughening of concrete surface, if necessary or by synthetic adhesive & sqm 591.73 689.728 408133 908.998 537881 219.27 129749
grout materials etc. With Sand Cement Mortar (1:3) 15 mm thick & 2
mm thick cement slurry at back side of tiles using cement @ 2.91
Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. At all
floors. Sizes, colors, design & textures will be decided by EIC.
3 Supplying and laying true to line and level Anti-Skid, Full Body,
Homogeneous & Granular finish Vitrified Tiles conforming to IS:15622-
2006 & IS 4457-2007 and testing shall be made in accordance with
IS:13630 [Non- modular sizes for tiles with Skid resistance > 0.5, Mohr's
hardness > 5.0, Staining resistance: Class-1, Water Absorption: E <
0.5%], MOR > 35 N/sq.mm in Internal area of building e.g. Toilet Block,
Passage, Corridor, Accessible Open Terrace etc. set in 20 mm sand
cement mortar (1:4) and 2 mm thick cement slurry at back side of tiles
using cement @ 2.91 Kg./Sqm or using Polymerised Adhesive (6 mm
thick layer applied directly over finished artificial stone floor/ Mosaic etc
without any backing course) laid after application slurry using 1.75 Kg of sqm 1246.6 0 0.00 36.159 45075.81 36.159 45075.81
cement per Sqm below mortar only, joints grouted with admixture of
white cement and colouring pigment to match with colour of tiles/
epoxy grout materials of approved make as directed and removal of wax
coating of top surface of tiles with warm water and polishing the tiles
using soft and dry cloth upto mirror finish complete including the cost of
materials, labour and all other incidental charges complete true to the
manufacturer's specification and direction of Engineer-in-Charge.
(White cement, synthetic adhesive and grout material to be supplied by
the contractor). Sizes, colors, design & textures will be decided by
engineer of WBEIDCL. Gr. floor.
4 1st floor sqm 1249.64 32.56 40688 32.560 40688 0 0.00
5 2nd floor sqm 1292.24 71.356 92209 71.356 92209 0 0.00
6 3rd floor sqm 1353.85 36.159 48953.86 36.159 48954 0 0
7 4th floor sqm 1422.3 0 0.00 36.159 51428.95 36.159 51428.95
8 5th floor sqm 1498.36 36.159 54179.20 36.159 54179 0 0
Sl. No Upto Previous R.A. Bill Upto Date R.A. Bill Present R.A. Bill
Description of works UNIT Rate (Rs.)
Quantity Amount(Rs.) Quantity Amount(Rs.) Quantity Amount(Rs.)
1 2 3 4 7 8 9 10 11 12
9
Removal of existing false ceiling (including board & frame work) &
disposal of the boards only beyond the compound, in conformity with
the Municipal / Corporation Rules for such disposal, loading into truck sqm 36.5 170.474 6222 216.086 7887 45.612 1665
and cleaning the site & store the frame (GI / Al) part inside the premises
as per direction of Engineer in charge.
Providing and fixing of false ceiling with powder coated exposed G.I.
10
grid suspension system (E-Grid T 2430 or equivalent load carrying
capacity with mid span deflection not exceeding 1/360 span with hanger
spacing of 1200mm c/c) consisting of Main Runner 3600 mm long, Cross
Tee 1200 mm / 600 mm long and Wall Angle. The Wall Angle shall be
fixed on PVC Dash Fasteners on the perimeter of the wall by steel
screws with distance 300mm c/c. The Main Runners to be placed @
1200 mm. The Cross Tee 1200mm will be inserted in the pre-cut slots of
Main Runner at regular interval of 600 mm to form a modular grid of
1200mm X 600mm. Additional Cross Tees of 600 mm shall be placed
perpendicular to the Cross Tee 1200 mm long to finally form a grid of sqm 836.64 208.991 174850 254.603 213011 45.612 38161
600 mm X 600 mm. Grid of module size 600 mm X 600 mm shall be
supported by 6 mm dia G.I. wire from purlins / soffit. 6 mm thick High
Pressure Steam Cured Non Asbestos Fibre Cement Standard Ceiling
Board (Density > 1300 Kg/m3) of size 595 mm X 595 mm, conforming IS
14862 & Type B Category III of ISO 8336, tested as per AS-1530 part 3 &
BS-476 Part 4,5,6,7 & 8, should be placed in the Grid module to form a
False Ceiling. All complete as per the drawing & directions of Engineer-
in-charge. False Ceiling at all floors (with 6mm thick Fibre Cement
designer Ceiling Board and E-Grid T-2430). Design & textures will be
decided by engineer of WBEIDCL.
11
Supplying, fitting & fixing of solid flush type doors of commercial
quality, the timber frame consisting of top and bottom rails and side
styles of well seasoned timber 65mm wide each and the entire frame
fitted with 37.5mm wide battens places both ways in order to make the
door of solid core and internal lipping with Garjan or similar wood sqm 3229.46 59.544 192295 79.616 257117 20.072 64822
veneers using phenol formaldehyde as glue etc. complete, including
fitting, fixing the shutters in position, anodized aluminum aldrop
(250mm x 16mm dia bolt), aluminum tower bolts (200 mm), anodized
aluminum 'D' type handle (150 mm) on both sides, cost of hinges and
other fittings. 32 mm thick shutters (single leaf). At all floors.
12 nos 1569.85 6 9419 10 15699 4 6279
Supply, fitting & fixing of Godrej Hydraulic door closer. Heavy type.
13 Wood work in door and window frame fitted and fixed in position
complete including a protective coat of painting at the contact surface
of the frame inluding cost of concrete, Iron Butt Hinges and M.S clamps,
etc. The rate is inclusive of removal of old existing PVC / Wooden door
frames & shutters and disposal of the same beyond the compound, in cum 59075.78 0 0.00 0.376 22212.49 0.376 22212.49
conformity with the Municipal / Corporation Rules for such disposal,
loading into truck and cleaning the site in all respect as per direction of
Engineer in charge. Wood : Sal (Local). Gr.flooor
14 1st floor cum 59227.9 0.75 44421 0.75 44421 0 0.00
15 2nd floor cum 59380.21 0.75 44535 0.75 44535 0 0.00
16 3rd floor cum 59536.7 0.376 22385.80 0.376 22386 0
17 4th floor cum 59684.25 0 0.00 0.376 22441.28 0.376 22441.28
18 5th floor cum 59874.4 0.376 22512.77 0.376 22513 0 0
Sl. No Upto Previous R.A. Bill Upto Date R.A. Bill Present R.A. Bill
Description of works UNIT Rate (Rs.)
Quantity Amount(Rs.) Quantity Amount(Rs.) Quantity Amount(Rs.)
1 2 3 4 7 8 9 10 11 12
Supplying, fitting and fixing Flat back urinal (half stall urinal) in white
19
vitreous chinaware of approved make in position with brass screws on
75 mm X 75 mm X 75 mm wooden blocks, PVC connector, CP over brass nos 2182.13 24 52371 32 69828 8 17457
spreader, dome shaped CP waste grating of 32 mm complete. Size 635
mm X 395 mm X 420 mm.
20
Supplying, fitting and fixing E.W.C. at existing line in white glazed
vitreous chinaware of approved make complete in position with nos 3048.44 30 91453 40 121938 10 30484
necessary bolts, nuts, seat cover etc. With 'S' / 'P' trap as applicable.
21 Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming
to I.S. specification with P.V.C. fittings complete,C.I. brackets including
two coats of painting to bracket etc. The rate is inclusive of removal of
old cistern & disposal of the same beyond the compound, in conformity nos 1483.15 30 44495 40 59326 10 14832
with the Municipal / Corporation Rules for such disposal, loading into
truck and cleaning the site in all respect as per direction of Engineer in
charge.
22 Supplying, fitting and fixing Squating plate with integral flushing in white
vitreous chinaware of approved make in cement concrete (6:3:1) with
jhama chips complete. Size 450 mm X 350 mm. The rate is inclusive of
removal of old existiong squatting plate & disposal of the same beyond nos 66.93 6 402 8 535 2 134
the compound, in conformity with the Municipal / Corporation Rules for
such disposal, loading into truck and cleaning the site in all respect as
per direction of Engineer in charge.
23 Supplying, fitting and fixing white vitreous china best quality approved
make pedestal type wash basin with C.I. brackets on 75 mm X 75 mm
wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality
brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30
mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia.,
nos 2817.98 0 0.00 0 0 0 0
900 mm long approved quality P.V.C. connector pipe with heavy brass
C.P. nut including mending good all damages and painting the brackets
with two coats of approved paint. Size 550 mm x 400 mm & Supplying,
fitting and fixing pedestal of approved make for wash basin (white).
Pillar cock jaquar make. model no CON-CHR-123BKN.
24 Supplying, fitting and fixing of Chromium plated angular Stop Cock with
wall flange (Equivalent to Code No. FUS-CHR-29053 of Jaquar or as nos 570.44 66 37649 88 50199 22 12550
decided by EIC).
25 Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver
red as per I.S. 3438 / 1965 together with brass C.P. hinges. 600 mm X nos 760.59 36 27381 48 36508 12 9127
450 mm.
26 Supplying, fitting and fixing G.I. pipes of TATA make with all necessary
accessories, specials viz. socket, bend, tee, union, cross, elbow, nipple,
longscrew, reducing socket, reducing tee, short piece etc. fitted with
holder bats clamps, including cutting pipes, making threads, fitting,
fixing etc. complete in all respect including cost of all necessary fittings
as required,jointing materials and two coats of painting with approved meter 181.02 0 0.00 0 0 0 0
paint in any position above ground. (Payment will be made on the
centre line measurements of total pipe line including all specials. No
separate payment will be made for accesories, specials, chase cutting in
walls & repairing the same.). 15 mm dia. medium quality. Concealed
work.
Sl. No Upto Previous R.A. Bill Upto Date R.A. Bill Present R.A. Bill
Description of works UNIT Rate (Rs.)
Quantity Amount(Rs.) Quantity Amount(Rs.) Quantity Amount(Rs.)
1 2 3 4 7 8 9 10 11 12
27 Supplying, fitting and fixing G.I. pipes of TATA make with all necessary
accessories, specials viz. socket, bend, tee, union, cross, elbow, nipple,
longscrew, reducing socket, reducing tee, short piece etc. fitted with
holder bats clamps, including cutting pipes, making threads, fitting,
fixing etc. complete in all respect including cost of all necessary fittings
as required,jointing materials and two coats of painting with approved meter 202.31 133.88 27085 200.82 40628 66.94 13543
paint in any position above ground. (Payment will be made on the
centre line measurements of total pipe line including all specials. No
separate payment will be made for accesories, specials, chase cutting in
walls & repairing the same.). 20 mm dia. medium quality. Concealed
work.
28 Supplying, fitting and fixing G.I. pipes of TATA make with all necessary
accessories, specials viz. socket, bend, tee, union, cross, elbow, nipple,
longscrew, reducing socket, reducing tee, short piece etc. fitted with
holder bats clamps, including cutting pipes, making threads, fitting,
fixing etc. complete in all respect including cost of all necessary fittings
as required,jointing materials and two coats of painting with approved meter 276.54 65.68 18163 65.68 18163 0 0.00
paint in any position above ground. (Payment will be made on the
centre line measurements of total pipe line including all specials. No
separate payment will be made for accesories, specials, chase cutting in
walls & repairing the same.). 25 mm dia. medium quality. Concealed
work.
29
Supplying, fitting and fixing towel rail with two brackets. C.P. over brass. nos 1064.82 30 31945 40 42593 10 10648
25 mm dia. and 600 mm long. Design will be decided by EIC.
Supplying, fitting and fixing of CP 2-way bib Cock - 15 mm, supplied,
30
fitted and fixed. (Code No.5041 & Model - FLORENTINE of JAQUAR or
similar brand) & Hand Shower (Health Faucet) with 1mtr Fexible Tube nos 4259.3 30 127779 40 170372 10 42593
with Wall Hook (Equivalent to Code No.573 & Model -ALLIED of Jaquar
or similar).
31 Supplying profiles of required section made of Aluminium Alloy
Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized
(with required film thickness and specified colour / natural) matt
finished conforming to IS: 1868-1983 for fabrication of composit door, meter 149.07 196.29 29261 261.72 39015 65.43 9754
sliding, louvered & casement windows, partitions, formed of basic
sections of any ISI embossed / certified make and brand as per direction
of Engineer - InCharge. (Payment will be made on finished length of the
work). Louvered window. Top, bottom and side member.
32 Supplying profiles of required section made of Aluminium Alloy
Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized
(with required film thickness and specified colour / natural) matt
finished conforming to IS: 1868-1983 for fabrication of composit door, meter 517.96 152.4 78937 203.2 105249 50.8 26312
sliding & casement windows, partitions, formed of basic sections of any
ISI embossed / certified make and brand as per direction of Engineer -
InCharge. (Payment will be made on finished length of the work).
Louvered window. Louvered Section.
33 Supplying profiles of required section made of Aluminium Alloy
Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized
(with required film thickness and specified colour / natural) matt
finished conforming to IS: 1868-1983 for fabrication of composit door, meter 200 48.9 9780 65.22 13044 16.32 3264
sliding & casement windows, partitions, formed of basic sections of any
ISI embossed / certified make and brand as per direction of Engineer -
InCharge. (Payment will be made on finished length of the work).
Louvered window. Cleat Angle.
Sl. No Upto Previous R.A. Bill Upto Date R.A. Bill Present R.A. Bill
Description of works UNIT Rate (Rs.)
Quantity Amount(Rs.) Quantity Amount(Rs.) Quantity Amount(Rs.)
1 2 3 4 7 8 9 10 11 12
34 Labour charge for fabrication and installation of composite door,
window, partitions made from annodized extruded alloy aluminium
sections for the following units: Glazed aluminium sliding windows
made of extruded and annodized alloy aluminium sectios, fabrications,
including cutting to proper shape and size, drilling and aligning of
window shutter frame fitted with in built locking arrangements, sliding
rollers and other necessary fittings, fixture, adhesives and joineries
along with extruded neoprine or EPDM gasketing in between window
frame and masonry work (walls, column, beam.lintels etc.) as well as
between glass and shutter frame for fixing glass and Polysulphide sqm 1140.88 28.624 32657 38.166 43543 9.542 10886
sealant and in between shutter and window frame where necessary.
The rate includes the hire charge of all tools and plants, including all
incidental charges, adhesive, joineries such as screw, cleat angle etc. ,
glass, neoprene / EPDM gasket, locking arrangement and rollers.
Louvered window. The rate is inclusive of removal of existing aluminum
/ MS windows from the wall, store at some designated place & repair all
the damages of the wall & disposal of the glass beyond the compound,
in conformity with the Municipal / Corporation Rules for such disposal,
loading into truck and cleaning the site in all respect as per direction of
Engineer in charge.
35
Supply, fitting & fixing of frostet glass of approved make and brand in sqm 444.94 5.459 2429 7.278 3238 1.819 809
aluminum louver / windows conforming to IS: 2835-1987. 5mm thick.
36 Supplying, fitting and fixing liquid soap container. Chromium Plated.
Sizes, design & model will be decided by EIC. nos 973.55 0 0.00 0 0 0 0
37
Stripping off worn out plaster and raking out joints of walls, celings etc.
upto any height and in any floor & disposal of the same beyond the
compound, in conformity with the Municipal / Corporation Rules for sqm 60.84 0 0.00 0 0.00 0 0.00
such disposal, loading into truck and cleaning the site in all respect as
per direction of Engineer in charge.
38 Labour for dismantling G.I. pipe with fittings. 15 mm & store at some
places inside the premises as decided by the EIC. meter 4.5 0 0.00 0 0 0 0
39 Labour for dismantling G.I. pipe with fittings. 20 mm & store at some
places inside the premises as decided by the EIC. meter 4.5 133.88 602 200.82 904 66.94 301
40 Labour for dismantling G.I. pipe with fittings. 25 mm & store at some
places inside the premises as decided by the EIC. meter 4.5 65.68 296 65.68 296 0 0.00
41 Supplying, fitting and fixing 18 mm thick marble partition slab with
chawk doongri marbel square cut, both sides polished with two front
corners rounded and edges polished. Size, texture & color will be sqm 1084.6 13.44 14577 22.4 24295 8.96 9718
decided by EIC. At any floor.
Supplying, fitting and fixing gunmetal wheel valve of approved brand
42
and make tested to 21 kg per sq. cm. (for water lines only). 25 mm. The
rate is inclusive of carefully removal of the old existing valve from the nos 591.73 1 592 1 592 0 0
pipeline & store at some places in the premises as decided by EIC. At
any floor.
Supplying, fitting and fixing gunmetal wheel valve of approved brand
43
and make tested to 21 kg per sq. cm. (for water lines only). 32 mm. The
rate is inclusive of carefully removal of the old existing valve from the nos 882.28 0 0.00 0 0 0 0
pipeline & store at some places in the premises as decided by EIC. At
any floor.
Supplying, fitting and fixing gunmetal wheel valve of approved brand
44
and make tested to 21 kg per sq. cm. (for water lines only). 40 mm. The
rate is inclusive of carefully removal of the old existing valve from the nos 1209.33 0 0.00 0 0 0 0
pipeline & store at some places in the premises as decided by EIC. At
any floor.
Sl. No Upto Previous R.A. Bill Upto Date R.A. Bill Present R.A. Bill
Description of works UNIT Rate (Rs.)
Quantity Amount(Rs.) Quantity Amount(Rs.) Quantity Amount(Rs.)
1 2 3 4 7 8 9 10 11 12
Supplying, fitting and fixing gunmetal wheel valve of approved brand
45
and make tested to 21 kg per sq. cm. (for water lines only). 50 mm. The
rate is inclusive of carefully removal of the old existing valve from the nos 1731.86 0 0.00 0 0 0 0
pipeline & store at some places in the premises as decided by EIC. At
any floor.
Supplying, fitting and fixing gunmetal wheel valve of approved brand
46
and make tested to 21 kg per sq. cm. (for water lines only). 80 mm. The
rate is inclusive of carefully removal of the old existing valve from the nos 4252.43 0 0.00 0 0 0 0
pipeline & store at some places in the premises as decided by EIC. At
any floor.
Supplying, fitting and fixing gunmetal wheel valve of approved brand
47
and make tested to 21 kg per sq. cm. (for water lines only). 100 mm. The
rate is inclusive of carefully removal of the old existing valve from the nos 7307.76 0 0.00 0 0 0 0
pipeline & store at some places in the premises as decided by EIC. At
any floor.
48
Dismantling & removal of urinals and disposal of the same beyond the
compound, in conformity with the Municipal / Corporation Rules for nos 25.09 24 602 32 803 8 201
such disposal, loading into truck and cleaning the site in all respect as
per direction of Engineer in charge.
Carefully dismantling & removal of EWC without damaging of existing
49
floor & CI line and disposal of the same beyond the compound, in
conformity with the Municipal / Corporation Rules for such disposal, nos 34.22 30 1027 40 1369 10 342
loading into truck and cleaning the site in all respect as per direction of
Engineer in charge.
50
Dismantling & removal of IWC including foot rest and disposal of the
same beyond the compound, in conformity with the Municipal / nos 37.26 6 224 8 298 2 75
Corporation Rules for such disposal, loading into truck and cleaning the
site in all respect as per direction of Engineer in charge.
51
Dismantling & removal of Wash Basin and disposal of the same beyond
the compound, in conformity with the Municipal / Corporation Rules for nos 40.31 36 1451 48 1935 12 484
such disposal, loading into truck and cleaning the site in all respect as
per direction of Engineer in charge.
52 Dismantling & removal of Pillar Cocks & store at some places inside the
premises as directed by Engineer in Charge. nos 26.62 36 958 48 1278 12 319
53 Dismantling & Removal of Angular stop cocks & store at some places
inside the premises as directed by Engineer in Charge. nos 12.16 82 997 112 1362 30 365
54 Dismantling & Removal of Bib cocks & store at some places inside the
premises as directed by Engineer in Charge. nos 12.16 36 438 48 584 12 146
55
Removal of rubbish,earth, tiles, marble, boken sanitary items, fale
ceiling boards etc. from the working site and disposal of the same
beyond the compound, in conformity with the Municipal / Corporation cum 722.56 0 0.00 0 0 0 0
Rules for such disposal, loading into truck and cleaning the site in all
respect as per direction of Engineer in charge
56 Supplying, fitting and fixing complete Bottle waste trap (Heavy Quality)
(a) Chromium plated Bottle trap 32 mm with 190 mm long connecting
pipe and wall flange (Equivalent to Code No. 545 & Model - Tropical / nos 1331.03 0 0.00 0 0 0 0
Sumthing Special of ESSCO or similar brand).
57 Removing old scales, blisters etc. of interior surface of walls,ceiling by
scraping etc. and preparing smooth and even surface with rendering or
cement mortar (1:2) (as necessary), to make the surface suitable for sqm 409.55 234.224 95926 316.966 129813 82.742 33887
receiving distemper. (Payment against this item will be made only when
this has been done on the specific direction of the Engineer-in-charge).
At any floor & any location.
Sl. No Upto Previous R.A. Bill Upto Date R.A. Bill Present R.A. Bill
Description of works UNIT Rate (Rs.)
Quantity Amount(Rs.) Quantity Amount(Rs.) Quantity Amount(Rs.)
1 2 3 4 7 8 9 10 11 12
58 Rendering the Surface of walls and ceiling with WATER PROOF wall
putty, compitable with acrylic paint of approved make & brand.(1.5 mm sqm 91.27 287.354 26227 449.998 41071 162.644 14845
thick). At any floor & any location.
59 Applying Interior grade Acrylic Primer of approved quality and brand on
plastered or concrete surface old or new surface to receive Distemper/
Acrylic emulsion paint including scraping and preparing the surface sqm 60.84 287.354 17483 449.998 27378 162.644 9895
throughly, complete as per manufacturer's specification and as per
direction of the EIC. Two Coats. Water based interior grade Acrylic
Primer. At any floor & any loaction.
60
Applying Acrylic Emulsion Paint of approved make and brand on walls
and ceiling including sand papering in intermediate coats. Two coats. sqm 136.9 287.354 39339 449.998 61605 162.644 22266
Luxury Quality.Color will be decided by the engineer of WBEIDCL. At any
floor & any loaction. Color scheme will be decided by EIC.
61 Stripping off worn out plaster and raking out joints of walls, celings etc.
upto any height and in any floor including removal of rubbish from the
working site and disposal of the same beyond the WBEIDCL compound, sqm 60.84 179.591 10926 180.001 10951 0.41 25
in conformity with the Municipal / Corporation Rules for such disposal,
loading into truck and cleaning the site in all respect as per direction of
Engineer in charge. At any floor & any location.
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar
62
including rounding off or chamfering corners as directed and raking out
joints including throating, nosing and drip course, scaffolding/staging sqm 110.28 0 0.00 0 0.00 0 0.00
where necessary. With 1:6 cement mortar. 15 mm thick plaster. Gr.
floor.
63 1st floor sqm 113.32 47.8 5417 47.8 5417 0 0.00
64 2nd floor sqm 116.37 0 0.00 0 0.00 0 0.00
65 3rd floor sqm 119.41 0 0.00 0 0.00 0 0.00
66 4th floor sqm 122.45 0 0.00 0 0.00 0 0.00
67 5th floor sqm 126.25 0 0.00 0 0.00 0 0.00
68 Supplying, fitting and fixing porcelain toilet paper holder of approved
make with wooden spindle as necessary. Roll type size 250 mm X 125 nos 874.67 10 8747 10 8747 0 0
mm. Design & model will be decided by EIC.
Dismantling all types of masonry excepting cement concrete plain or
69
reinforced, including removal of rubbish from the working site and
disposal of the same beyond the WBEIDCL compound, in conformity
with the Municipal / Corporation Rules for such disposal, loading into cum 676.92 0 0.00 0.547 370.28 0.547 370.28
truck and cleaning the site in all respect as per direction of Engineer in
charge. Gr. floor.
70 2nd floor cum 704.3 1.3 916 1.3 916 0 0.00
71 2nd floor cum 775.8 0.825 640 0.825 640 0 0.00
72 3rd floor cum 874.67 0.547 478.44 0.547 478 0 0
73 4th floor cum 943.13 0 0.00 0.547 515.89 0.547 515.89
74 5th floor cum 988.76 0.547 540.85 0.547 541 0 0
76
Dismantling R.C. floor, roof, beams etc. including cutting rods and
removal of rubbish from the working site and disposal of the same
beyond the WBEIDCL compound, in conformity with the Municipal / cum 2677.27 0 0.00 0 0.00 0 0.00
Corporation Rules for such disposal, loading into truck and cleaning the
site in all respect as per direction of Engineer in charge. Gr. floor.
76 1st floor cum 3194.47 0 0.00 0 0.00 0 0.00
77 2nd floor cum 3879 0 0.00 0 0.00 0 0.00
78 3rd floor cum 4183.25 0 0.00 0 0.00 0 0.00
79 4th floor cum 4487.48 0 0.00 0 0.00 0 0.00
Sl. No Upto Previous R.A. Bill Upto Date R.A. Bill Present R.A. Bill
Description of works UNIT Rate (Rs.)
Quantity Amount(Rs.) Quantity Amount(Rs.) Quantity Amount(Rs.)
1 2 3 4 7 8 9 10 11 12
80 5th floor cum 4563.54 0 0.00 0 0.00 0 0.00
81 Priming one coat on timber or plastered surface with synthetic oil
bound primer of approved quality including smoothening surfaces by sqm 197.75 161.34 31905 268.86 53167 107.52 21262
sand papering etc. At any floor & any location.
82
Painting with best quality synthetic enamel paint of approved make and
brand including smoothening surface by sand papering etc. including
using of approved putty etc. on the surface, if necessary. On timber or sqm 121.69 161.34 19633 268.86 32718 107.52 13084
plastered surface. Two coats. At any floor & any location. The color
scheme will be decided by EIC.
83 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in
Gr. floor. sqm 550.66 0 0.00 0.835 459.80 0.835 459.80
84 1st floor sqm 559.79 4.85 2715 4.85 2715 0 0.00
85 2nd floor sqm 568.92 1.73 984 1.73 984 0 0.00
86 3rd floor sqm 578.04 0.865 500.00 0.865 500 0 0
87 4th floor sqm 587.17 0 0.00 0.865 507.90 0.865 507.90
88 5th floor sqm 597.06 0.865 516.46 0.865 516 0 0
89 Supplying, fitting & fixing Aluminium domical grating & removal of old
one. 125 mm nos 50.22 66 3315 88 4419 22 1105
Total= 2120298 Total= 2854125 Total= 733827
MEASUREMENT SHEET
Sl. No. ITEM NO. L(M) B(M) H(M) QTY. UNIT
Taking out vitrified / ceramic / Mirzapur or
1 glazed porcelain tiles with morters carefully
by chiselling from walls or floor
Wall tiles
Ground floor & 4th floor
Gents toilet (East side) 2 4.81 1.5 14.430
4 4.61 1.5 27.660
2 18.17 1.5 54.510 96.600
Ground floor & 4th floor
Ladies toilet ( East side) 6 4.49 1.5 40.410
2 8.52 1.5 25.560 65.970
Floor tiles
Ground floor & 4th floor
Gents toilet (East side) W.C 2 1.12 1.52 3.405
Door area 2 0.75 0.1 0.150
Deduction for column area 2 0.25 0.1 -0.050
W.C 4 1.02 1.52 6.202
Door area 4 0.75 0.1 0.300
Basin & urinal area 2 3.6 3.36 24.192
Door area 2 0.75 0.1 0.150
6 3.2 0.25 4.800
4 3.225 0.1 1.290
2 0.55 0.25 0.275 40.713
Ground floor & 4th floor
Ladies toilet ( East side) 2 2.5 0.25 1.250
Basin area 2 3.36 1.92 12.902
2 1.68 2.16 7.258
Door area 2 0.75 0.1 0.150
W.C 6 1.02 1.52 9.302
Door area 6 0.75 0.1 0.450 31.312
Total= 234.596 Sqm