3URGXFW&DWDORJXH

1
Revised & reprinted September 2023
 Product Catalogue
Rocla (Pty) Ltd is Southern Africa’s leading manufacturer of manufacture at customer request. This is made possible
precast concrete products for infrastructure, including pipes, through the technical expertise and quality controls we have
culverts, manholes, poles and various other related products. in place after 100 years of experience in the Precast
In this catalogue, we list the products currently manufac- Concrete field.
tured within an extensive network of factories throughout For any comments you may have concerning this cata-
South Africa, Namibia and Botswana. We also illustrate a logue, or for any further information, please refer to the
portion of the special products we are able to design and contact details on the back cover.

Contents
Stormwater Interlocking Joint (IJ) Pipes 1

Stormwater Spigot & Socket (RJ) Pipes 2

Rocla Sewerage Products 3

Pressure Pipes Spigot & Socket (RJ) pipes 4

Jacking Pipes In-The-Wall Joint 5

Jacking Pipes Steel Band Joint 5

Rectangular Portals Road Application Stormwater Culverts 6

SATS SAR Rectangular Portals Rail Application Stormwater Culverts 7

Wingwalls 7

Culvert Base Slabs 9

Jacking Culverts In-the-wall joint (IWJ) 10

Manholes, Chambers, Shaft Sections & Slabs 11

Airport Manholes 12

Square Manhole Chambers & Cover Slabs 13

Concrete Poles 14

Toilet Systems 15

Roadside Furniture 16

Bus Shelters 17

Secure Signal Houses 17

Roadside Dustbins 17

Penstock Rings 19

Retaining Walls 19

Wash Troughs & Stock Troughs 20

 Stormwater
Interlocking Joint (IJ) Pipes
Notes:
1. Manufactured to SANS 677 (concrete non-presure pipes).
2. Pipe class greater than 1000 can be supplied. Contact Rocla for enquiries.
3. Pipe wall thickness may vary between factories.
4. Some of the larger diameter pipes are not available at all Rocla factories.
Please enquire before placing an order.

Nominal Inside Outside Wall Nominal Inside Approximate
Pipe Class
diameter (ND) diameter (ID) diameter (OD) thickness (T) length (L) socket (S) pipe mass
(mm) (mm) (mm) (mm) (mm) (mm) (kg)

300 292 362 35 2440 16 226

375 369 445 38 2440 16 306
450 445 533 44 2440 20 426
525 534 616 41 2440 20 466
600 611 699 44 2440 15 570
675 685 787 51 2440 17 742
750 762 870 54 2440 18 871
50D 825 830 946 58 2440 18 1019
900 903 1029 63 2440 18 1204
1050 1034 1194 80 2440 22 1763
1200 1181 1359 89 2440 22 2235
1350 1328 1524 98 2440 25 2764
1500 1461 1689 114 2440 25 3551
1650 1608 1854 123 2440 25 4211
1800 1755 2019 132 2440 30 4926
1950 1898 2184 143 2440 30 5772
300 292 362 35 2440 16 226
375 369 445 38 2440 16 306
450 445 533 44 2440 20 426
525 514 616 51 2440 20 570
600 585 699 57 2440 15 724
675 647 787 70 2440 17 993
750 718 870 76 2440 18 1193
75D 825 788 946 79 2440 18 1355
900 853 1029 88 2440 18 1638
1050 986 1194 104 2440 22 2242
1200 1151 1359 104 2440 22 2581
1350 1292 1524 116 2440 25 3230
1500 1419 1689 135 2440 25 4149
1650 1566 1854 144 2440 25 4870
1800 1707 2019 156 2440 30 5748
1950 1846 2184 169 2440 30 6735
300 292 362 35 2440 16 226
375 369 445 38 2440 16 306
450 445 533 44 2440 20 426
525 514 616 51 2440 20 570
600 585 699 57 2440 15 724
675 647 787 70 2440 17 993
750 718 870 76 2440 18 1193
825 788 946 79 2440 18 1355
100D 900 853 1029 88 2440 18 1638
1050 986 1194 104 2440 22 2242
1200 1127 1359 116 2440 22 2852
1350 1262 1524 131 2440 25 3609
1500 1383 1689 153 2440 25 4648
1650 1524 1854 165 2440 25 5512
1800 1665 2019 177 2440 30 6448
1950 1800 2184 192 2440 30 7564

1
 Stormwater
Spigot & Socket Joint (RJ) pipes
Notes:
1. Manufactured to SANS 677 (concrete non-presure pipes).
2. The joint uses the rolling principal and no lubrication is required.
3. Pipe class greater than 1000 can be supplied. Contact Rocla for enquiries.
4. Pipe wall thickness may vary between factories.
5. RJ Pipes may also be used for sewerage applications.
Refer to Rocla Sewerage Catalogue for details.
6. For satisfactory performance the allowable joint deflection given below should not be exceeded.

Nominal diameters (mm) 300-375 450-600 675-900 1050-1200 1350-1800

Maximum deflection ( ° ) 2 1,5 1 0,75 0,5

Nominal Inside Outside Wall Nominal Socket Outside Socket Outside Socket Approximate

Pipe Class diameter diameter diameter thickness length diameter length slip pipe mass
(ND) (ID) (OD) (T) (L) (A) (B) (S) pipe
(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (kg)

300 298 368 35 2440 464 225 114 258

375 369 445 38 2440 540 235 127 340
450 445 533 44 2440 641 260 127 476
525 534 616 41 2440 730 265 121 527
600 611 699 44 2440 825 300 139 658
675 685 787 51 2440 920 315 139 849
750 762 870 54 2440 1016 330 139 1007
50D 825 830 946 58 2440 1086 330 139 1159
900 913 1041 64 2440 1194 360 139 1415
1050 1034 1194 80 2440 1353 390 162 1998
1200 1187 1365 89 2440 1543 425 168 2568
1350 1328 1524 98 2440 1708 445 175 3151
1500 1461 1689 114 2440 1886 490 190 4059
1650 1640 1878 119 2440 2088 510 190 4758
1800 1755 2019 132 2440 2250 525 190 5675
300 298 368 35 2440 464 225 114 258
375 369 445 38 2440 540 235 127 340
450 445 533 44 2440 641 260 127 476
525 514 616 51 2440 730 265 121 631
600 585 699 57 2440 825 300 139 811
675 659 787 64 2440 920 315 139 1022
750 730 870 70 2440 1016 330 139 1243
75D 825 788 946 79 2440 1086 330 139 1495
900 869 1041 86 2440 1194 360 139 1803
1050 986 1194 104 2440 1353 390 162 2477
1200 1157 1365 104 2440 1543 425 168 2916
1350 1292 1524 116 2440 1708 445 175 3617
1500 1419 1689 135 2440 1886 490 190 4657
1650 1600 1878 139 2440 2088 510 190 5399
1800 1707 2019 156 2440 2250 525 190 6496
300 298 368 35 2440 464 225 114 258
375 369 445 38 2440 540 235 127 340
450 445 533 44 2440 641 260 127 476
525 514 616 51 2440 730 265 121 631
600 585 699 57 2440 825 300 139 811
675 659 787 64 2440 920 315 139 1022
100D 750 730 870 70 2440 1016 330 139 1243
825 788 946 79 2440 1086 330 139 1495
900 869 1041 86 2440 1194 360 139 1803
1050 986 1194 104 2440 1353 390 162 2477
1200 1127 1365 119 2440 1543 425 168 3255
1350 1262 1524 131 2440 1708 445 175 3996
1500 1383 1689 153 2440 1886 490 190 5155
1650 1584 1878 165 2440 2088 510 190 6208
1800 1665 2019 177 2440 2250 525 190 7197

2
 Rocla Sewerage Products
Rocla offers a range of sewerage infrastructure such as pipes,
manholes and related components.

Pipes: Manholes:
Rocla offers the various types of pipes for sewerage Rocla manufactures various manhole components for
applications: sewerage applications:
• Pipes with a dolomitic aggregate. • Manhole components with dolomitic aggregates.
• Pipes with a sacrificial layer. • HDPE lined manhole components
• Pipes with HDPE lining. • Manhole components with Xypex BIO-SAN C500.
• Pipes with Xypex BIO SAN C500.
• Rocla jacking pipes may also be used for sewerage For more information refer to our Sewerage Catalogue.
application. Contact Rocla for details.

3
 Pressure Pipes
Spigot & Socket (RJ) pipes

Notes:
1. Manufactured to SANS 676 (concrete presure pipes).
2. The joint uses the rolling principal and no lubrication is required.
3. Pipe wall thickness may vary between factories.
4. For satisfactory performance the allowable joint deflection given below should not be exceeded:

Nominal diameters (mm) 300-375 450-600 675-900 1050-1200 1350-1800

Maximum deflection ( ° ) 2 1,5 1 0,75 0,5

Nominal Inside Outside Wall Nominal Socket Outside Socket Outside Socket Approximate

Pipe Class diameter diameter diameter thickness length diameter length slip pipe
(ND) (ID) (OD) (T) (L) (A) (B) (S) mass
(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (kg)

300 284 368 42 2440 464 225 114 298

375 361 445 42 2440 540 235 127 369
450 437 533 48 2440 641 260 127 511
525 514 616 51 2440 730 265 121 631
600 591 699 54 2440 825 300 139 776
T2 675 673 787 57 2440 920 315 139 930
750 750 870 60 2440 1016 330 139 1097
825 818 946 64 2440 1086 330 139 1257
900 913 1041 64 2440 1194 360 139 1415
1050 1066 1194 64 2440 1353 390 162 1666
1200 1219 1365 73 2440 1543 425 168 2188
1350 1352 1524 86 2440 1708 445 175 2833
1500 1503 1689 93 2440 1886 490 190 3443
300 284 368 42 2440 464 225 114 298
375 361 445 42 2440 540 235 127 369
450 437 533 48 2440 641 260 127 511
525 514 616 51 2440 730 265 121 631
600 591 699 54 2440 825 300 139 776
T4 675 673 787 57 2440 920 315 139 930
750 750 870 60 2440 1016 330 139 1097
825 818 946 64 2440 1086 330 139 1257
900 901 1041 70 2440 1194 360 139 1523
1050 1028 1194 83 2440 1353 390 162 2059
1200 1181 1365 92 2440 1543 425 168 2639
300 284 368 42 2440 464 225 114 298
375 361 445 42 2440 540 235 127 369
450 431 533 51 2440 641 260 127 537
525 496 616 60 2440 730 265 121 721
T6 600 567 699 66 2440 825 300 139 914
675 641 787 73 2440 920 315 139 1138
750 706 870 82 2440 1016 330 139 1414
825 770 946 88 2440 1086 330 139 1633
900 845 1041 98 2440 1194 360 139 2006
300 284 368 42 2440 464 225 114 298
375 343 445 51 2440 540 235 127 369
T8 450 413 533 60 2440 641 260 127 537
525 472 616 72 2440 730 265 121 721
600 531 699 84 2440 825 300 139 914

4 7
 Jacking
TRANSMISSION
POLESAND Pipes
FORDISTRIBUTION
RETICULATION POLES POLES
LIGHTING
In-The-Wall Joint

Notes:
1. Manufactured to SANS 677 (concrete non-presure pipes).
2. The joint uses the sliding rubber ring principal and a lubricant is required.
3. The allowable joint deflection is 0.5° for all pipe diameters.

Nominal Outside Inside Wall Nominal Approximate
Pipe Class diameter diameter diameter thickness length Socket pipe mass
(ND) (OD) (ID) (T) (L) (S)
(mm) (mm) (mm) (mm) (mm) (mm) (kg)

900 1090 900 95 2440 120 1869

1117 1371 1117 127 2440 133 3125
1473 1778 1473 152 1220 154 2451
1678 2032 1678 177 1220 164 3247
100D 1800 2160 1800 180 1220 165 3524
2000 2400 2000 200 1220 170 4351
2250 2700 2250 225 1220 175 5507
2340 2800 2340 230 1220 178 5845
2500 3000 2500 250 1500 178 8359

Jacking Pipes
Steel band joint

Notes:
1. Manufactured to SANS 677 (concrete non-presure pipes).
2. The joint uses the sliding rubber ring principal and a lubricant is required.
3. The allowable joint deflection is 0.5° for all pipe diameters.

Nominal Outside Inside Wall Nominal Approximate
Pipe Class diameter diameter diameter thickness length Socket pipe mass
(ND) (OD) (ID) (T) (L) (S)
(mm) (mm) (mm) (mm) (mm) (mm) (kg)

100D 1000 1220 1000 110 2500 110 2474

Jacking Pipes

5
8
 Rectangular Portals
Road Application Stormwater Culvert - SANS 986

Notes:
1. Manufactured to SANS 986
(Precast reinforced concrete culverts).
2. Culverts to take greater loads than specified in SABS 986
can be manufactured. Please enquire from your nearest
Rocla sales office.
3. For lifting hole arrangements see page 9.

Nominal size Dimensions Waterway Approx.
S x H W D St td tl tt c d area mass
(mm) (mm) (mm) (mm) (mm) (mm) (mm) (kg) (mm) (mm) (m2) (kg/unit)
450 300 600 390 470 90 75 65 37 75 0.135 311
375 600 465 474 90 75 63 37 75 0.170 342
450 600 540 480 90 75 60 37 75 0.206 370
600 300 760 390 620 90 80 70 50 100 0.178 373
450 760 540 630 90 80 65 50 100 0.272 436
600 760 690 640 90 80 60 50 100 0.367 495
750 300 920 390 770 90 85 75 50 100 0.223 427
450 920 540 780 90 85 70 50 100 0.339 496
600 920 690 790 90 85 65 50 100 0.457 560
750 920 840 800 90 85 60 50 100 0.576 619
900 300 1100 400 920 100 100 90 50 100 0.268 541
450 1100 550 930 100 100 85 50 100 0.407 624
600 1100 700 940 100 100 80 50 100 0.547 702
750 1100 850 950 100 100 75 50 100 0.689 775
900 1100 1000 960 100 100 70 50 100 0.832 844
1200 300 1440 420 1220 120 120 110 50 100 0.358 777
450 1440 570 1230 120 120 105 50 100 0.542 878
600 1440 720 1240 120 120 100 50 100 0.727 975
750 1440 870 1250 120 120 95 50 100 0.914 1067
900 1440 1020 1260 120 120 90 50 100 1.102 1155
1200 1440 1320 1280 120 120 80 50 100 1.483 1315
1500 300 1750 425 1520 125 125 115 75 225 0.436 968
450 1750 575 1530 125 125 110 75 225 0.665 1075
600 1750 725 1540 125 125 105 75 225 0.895 1176
750 1750 875 1550 125 125 100 75 225 1.127 1273
900 1750 1025 1560 125 125 95 75 225 1.360 1365
1200 1750 1325 1580 125 125 85 75 225 1.831 1535
1500 1750 1625 1600 125 125 75 75 225 2.308 1686
1800 600 2100 750 1840 150 150 130 100 300 1.062 1615
900 2100 1050 1860 150 150 120 100 300 1.617 1851
1200 2100 1350 1880 150 150 110 100 300 2.178 2068
1500 2100 1650 1900 150 150 100 100 300 2.745 2266
1800 2100 1950 1920 150 150 90 100 300 3.318 2446
2100 600 2400 750 2140 150 150 130 100 300 1.242 1756
900 2400 1050 2160 150 150 120 100 300 1.887 1992
1200 2400 1350 2180 150 150 110 100 300 2.538 2210
1500 2400 1650 2200 150 150 100 100 300 3.195 2408
1800 2400 1950 2220 150 150 90 100 300 3.858 2587
2100 2400 2250 2240 150 150 80 100 300 4.527 2748
2400 600 2720 760 2440 160 160 140 100 300 1.422 2031
900 2720 1060 2460 160 160 130 100 300 2.157 2286
1200 2720 1360 2480 160 160 120 100 300 2.898 2522
1500 2720 1660 2500 160 160 110 100 300 3.645 2739
1800 2720 1960 2520 160 160 100 100 300 4.398 2937
2100 2720 2260 2540 160 160 90 100 300 5.157 3117
2400 2720 2560 2560 160 160 80 100 300 5.922 3277
3000 600 3460 790 3040 190 230 210 150 300 1.767 3042
900 3460 1090 3060 190 230 200 150 300 2.682 3429
1200 3460 1390 3080 190 230 190 150 300 3.603 3797
1500 3460 1690 3100 190 230 180 150 300 4.530 4147
1800 3460 1990 3120 190 230 170 150 300 5.463 4477
2100 3460 2290 3140 190 230 160 150 300 6.402 4789
2400 3460 2590 3160 190 230 150 150 300 7.347 5081
3000 3460 3190 3200 190 230 130 150 300 9.255 5610
3600 600 4060 850 3640 250 230 210 150 300 2.127 4167
900 4060 1150 3660 250 230 200 150 300 3.222 4555
1200 4060 1450 3680 250 230 190 150 300 4.323 4923
1500 4060 1750 3700 250 230 180 150 300 5.430 5272
1800 4060 2050 3720 250 230 170 150 300 6.543 5603
2100 4060 2350 3740 250 230 160 150 300 7.662 5914
2400 4060 2650 3760 250 230 150 150 300 8.787 6207
3000 4060 3250 3800 250 230 130 150 300 11.055 6736
4000 1500 4500 1750 4100 250 250 200 200 600 5.955 6043
3000 4500 3250 4200 250 250 150 200 600 12.180 7696
Walkway Culvert (1 m unit length)
1500 2000 1850 2225 1590 225 175 130 150 300 3.045 2764
9
 SATS SAR Rectangular Portals
Rail Application Stormwater Culvert

Notes:
1. Designed to SATS Bridge Code.
2. Bespoke designs for non-standard applications can be done.
Please enquire from your nearest Rocla sales office.

3. For lifting hole arrangements see page 9.

Nominal Size Dimensions Waterway Approx. Mass
S x H Z W D St td tl tt c/r d area per unit
(mm) (mm) (m) (mm) (mm) (mm) (mm) (mm) (kg) (mm) (mm) (m2) (kg/unit)
750 450 0-5 950 600 780 150 100 85 50 100 0.339 726
600 0-5 950 750 790 150 100 80 50 100 0.457 804
750 0-5 950 900 800 150 100 75 50 100 0.576 877
900 450 0-5 1100 580 930 130 100 85 50 100 0.407 728
600 0-5 1100 730 940 130 100 80 50 100 0.547 806
750 0-5 1100 880 950 130 100 75 50 100 0.689 879
900 0-5 1100 1030 960 130 100 70 50 100 0.832 947
1200 450 0-5 1440 610 1230 160 120 105 50 100 0.542 1060
600 0-5 1400 760 1240 160 120 100 50 100 0.727 1156
1200 0-5 1400 1360 1280 160 120 80 50 100 1.483 1496
1500 600 0-5 1750 755 1540 155 125 105 75 225 0.895 1341
750 0-5 1750 905 1550 155 125 100 75 225 1.127 1438
900 0-5 1750 1055 1560 155 125 95 75 225 1.360 1530
1000 0-5 1860 1175 1566 175 180 147 150 1.523 2084
1000 5 - 10 1860 1225 1566 225 180 147 150 1.523 2377
1500 0-5 1860 1675 1600 175 180 130 150 2.315 2519
1500 5 - 10 1860 1725 1600 225 180 130 150 2.315 2811
1800 600 0-5 2100 750 1840 150 150 130 100 300 1.062 1615
900 5 - 10 2100 1070 1860 170 150 120 100 300 1.617 1983
2000 1000 0-5 2420 1225 2066 225 210 177 200 2.016 2986
1000 5 - 10 2420 1275 2066 275 210 177 200 2.016 3367
1500 0-5 2420 1725 2100 225 210 160 200 3.058 3515
1500 5 - 10 2420 1775 2100 275 210 160 200 3.058 3896
1800 0-5 2420 2025 2120 225 210 150 200 3.691 3808
1800 5 - 10 2420 2075 2120 275 210 150 200 3.691 4189
2000 0-5 2420 2225 2134 225 210 143 200 4.117 3990
2000 5 - 10 2420 2275 2134 275 210 143 200 4.117 4371
2500 1500 0-5 2960 1725 2600 225 230 180 250 3.798 4117
1500 5 - 10 2960 1825 2600 325 230 180 250 3.798 5048
2000 0-5 2960 2225 2634 225 230 163 250 5.107 4655
2000 5 - 10 2960 2325 2634 325 230 163 250 5.107 5587
2500 0-5 2960 2725 2666 225 230 147 250 6.431 5148
2500 5 - 10 2960 2825 2666 325 230 147 250 6.431 6079
3000 1000 0-5 3570 1275 3066 275 285 252 300 2.994 4902
1000 5 - 10 3570 1375 3066 375 285 252 300 2.994 6026
1500 0-5 3570 1775 3100 275 285 235 300 4.536 5667
1500 5 - 10 3570 1875 3100 375 285 235 300 4.536 6791
2000 0-5 3570 2275 3134 275 285 218 300 6.095 6378
2000 5 - 10 3570 2375 3134 375 285 218 300 6.095 7502
2500 0-5 3570 2775 3166 275 285 202 300 7.669 7044
2500 5 - 10 3570 2875 3166 375 285 202 300 7.669 8168
3000 0-5 3570 3275 3200 275 285 185 300 9.261 7650
3000 5 - 10 3570 3375 3200 375 285 185 300 9.261 8774
3600 2100 0-5 4200 2500 3740 400 300 230 150 300 7.662 8933
2400 0-5 4200 2800 3760 400 300 220 150 300 8.787 9358

Precast Wingwall Units

Rocla manufactures a range of standard precast concrete
wingwall units to conform to international standards and
requirements. These units may be customised to accommodate
multiple conduit applications for both pipe and portal culverts.
Refer to the Rocla Wingwall brochure for more details.
7
10
 Culvert Lifting Holes

Plan & side view

showing lifting hole arrangements
Span Hole arangement (ø 50mm MIN.)
450 - 750 Single hole in centre in deck
900 - 3600 Two lifting holes in deck
1500 - 3600 Single hole in each leg

8
11
 Culvert Base Slabs
Slabs for Slabs for SATS Rectangular
Rectangular Portal Culvert Portal Culvert

Rectangular Portal Culvert with precast base.

Culvert
Approx. Culvert Fill Approx.
Span Dimensions Dimensions
Mass Span Mass

S E t a B S Z E t a B

(mm) (mm) (mm) (mm) (mm) (kg/unit) (mm) (m) (mm) (mm) (mm) (mm) (kg/unit)

450 640 65 95 450 166 750 0-5 1000 160 120 760 563

600 800 85 95 610 262 900 0-5 1150 160 120 910 651

750 960 100 100 760 362 1200 0-5 1500 160 140 1220 851

900 1150 115 120 910 488 1500 0-5 1900 180 185 1530 1197

1200 1480 130 135 1210 701 1500 5 - 10 1900 220 185 1530 1436

1500 1800 140 140 1520 913 1800 0-5 2150 200 165 1820 1497

1800 2150 150 165 1820 1158 2000 0-5 2450 220 200 2050 1858

2100 2470 160 165 2140 1412 2000 5 - 10 2450 280 200 2050 2321

2400 2770 170 165 2440 1674 2500 0-5 3000 250 225 2550 2561

3000 3510 190 245 3020 2337 2500 5 - 10 3000 330 225 2550 3317

3600 4150 200 265 3620 2897 3000 0-5 3600 270 275 3050 3299

4000 4600 200 265 4070 3216 3000 5 - 10 3600 370 275 3050 4433

9
12
 Jacking Culverts
In-the-wall joint (IWJ)

Span Nominal Wall Thicness Length Approx
Class S H T mass
(mm) (mm) (mm) (mm) (kg)

2000 2000 250 1215 7305

2500 2000 250 1215 8089
100s 2500 2500 250 1215 8873
3000 2500 250 1215 9656
3000 3000 250 1215 10 440

Allowable joint deflection: 0.25°

10
13
 Manholes, Chambers,
Shaft Sections & Slabs - SANS 1294
Note:
1. 1950 Manholes are not made at all Rocla factories,
Manhole Chambers
please enquire before placing an order. Normal Inside Outside Wall Nominal Approx Proof
2. Manhole Components may be used for sewer applications. Diameter Diameter Diameter Thickness Length Mass Load
Refer to Rocla Sewerage Catalogue for details. ND ID OD T L
mm mm mm mm mm kg/unit kN/m
750 750 860 55 250 90 15
750 860 55 500 179 15
750 860 55 1000 359 15
CONCRETE LID
1000 1000 1130 65 250 140 15
1000 1130 65 500 281 15
125 COVER SLAB 1000 1130 65 1000 561 15
1250 1250 1400 75 250 201 15
570 1250 1400 75 500 403 15
75 SPACER SLAB 1250 1400 75 1000 805 15
Ø560 1500 1523 1689 83 250 270 15
1523 1689 83 500 540 15
150/125 20
560ID ROUND COVER/ADAPTOR SLAB
(CONCRETE LID CAN FIT THIS SLAB DIRECTLY) 1523 1689 83 1000 1080 15
125 TYPICAL ON ALL SHAFT SECTIONS
1800 1829 2019 95 250 370 15
1829 2019 95 500 741 15
250 1829 2019 95 1000 1418 15
250, 500
1950 1944 2184 120 1000 2008 15
OR 1000 250
NOM. LENGTHS

750ID ACCESS SHAFT

Reducer Slabs Cover Slabs
250
150 THICK 1000-1250 Nominal Reduce Thickness Approx Nominal Reduce Thickness Approx
175 THICK 1500-1800
Diameter to s Mass Diameter to s Mass

REDUCER SLAB mm mm mm mm mm mm mm kg
125
TYPICAL ON ALL 1000 750 150 217 750 560 150 115
CHAMBER SECTIONS
1250 750 150 425 1000 560 150 279
250 1500 750 175 812 1250 560 150 486
1800 750 175 1246 1500 560 175 884
250, 500
OR 1000 250 1950 750 195 1662 1800 560 175 1380
NOM. LENGTH
1950 560 195 1742
250
Adaptor/Cover Slabs
NOTE:
Nominal Approx
ALL MANHOLE JOINTS TO BE Opening Thickness
SEALED WITH 'DENSO' Diameter Mass
SEALOSTRIP OR EQUIVALENT
mm mm mm kg
750 560 150 115
CHAMBER SECTIONS

Spacer Slabs
Nominal Approx
Opening Thickness
250 NOM. LENGTH Diameter Mass

mm mm mm kg
750 560 75 58
CAST-IN-SITU FOUNDATION

Concrete Lids
MANHOLE WITH CAST-IN-SITU BASE Nominal Diameter Rating Approx Mass
mm kg
560 MD/HD/XHD 91

Section of Manhole Access Shaft and Precast Base Unit.

1000 Diameter, Mass 716kg, 6 outlets.

11
14
Airport Manhole

12
15
 Square Manhole Chambers
& Cover Slabs

Wall Nominal Approximate Cover Slab Approximate
A B thickness length Haunch chamber mass Thickness cover slab mass
(mm) (mm) (mm) (mm) (mm x mm) (kg) (mm) (kg)

1200 1200 100 500 175 x 175 750 125 507

2000 2000 150 500 200 x 200 1767 125 1532
3000 2500 150 500 200 x 200 2348 125 2776

1613
16
 Concrete Poles
Rocla is a pioneer in the manufacturing of concrete or higher if required. Double spun poles are also
poles in South Africa. The use of pre-cast concrete manufactured for applications where single spun poles
poles has seen a massive growth across a variety of in- will not suffice.
dustries due to the many advantages of concrete poles
compared to steel and wooden poles, thus offering a All Rocla poles conform to SANS 470 “Concrete poles
long-term cost effective solution. for telephone, power and lighting purposes”. Rocla has
an in-house quality assurance team that will ensure
Rocla poles fall into two broad categories: cast poles that the requirements of the standard are
which are manufactured in lengths up to 13m and rat- complied with.
ings up to 10kN, or higher if required; spun poles which
are manufactured in single lengths up to 24m, jointed Refer to “Rocla Poles” brochure for more details.
lengths up to 36m and ratings up to 106kN,

Jointed Double Concrete Poles for overhead power

lines utilised as an unstayed angle structure.

14
 Toilet Systems
One-piece Toilet
Notes:

1. One piece, precast concrete toilet structure with water pipe above the cistern.

Panel Toilet
Notes:

1. Rocla leads the way in providing mass Technical Features: • Bolts tap into plastic sleeve, ensuring ease
employment in the provision of sanitation. • New Patented Concrete Technology. for later relocation.
Rocla has left no stone unturned in developing • All concrete structure. • Strong textured galvanised steel pivot door.
its new Lightweight Concrete Sanitation Unit. • All components have convenient “hand grips”. • “Real door” mechanism that self latches.
• One piece walls, roof, floor and spreader slab. • Door can be opened from inside when locked
Social Development Features: • No “styrofoam” or “metal bits and pieces”. on the outside.
• Labour intensive methods used. • Panels are light and easy to handle. • Integral cross ventilation built in.
• Community based labour. • Top structure erected in 15 minutes. • VIP pit adaptable to all conditions.
• Up to 70% woman employed. • Very low breakage/damage factor. • All types of pans bolt to the floor.
• Training and transfer of skills. • Available in VIP or Waterborne format.
• On site training and employment. • Designed to be in line with all Standards. Logistical Facts:
• Toilet can be relocated by the household. • Large interior (9oomm Wide x 1100mm Deep • One manufacturing facility can produce a
• Preferred product by communities. x 2000mm High). large quantity of units per month.
• Most suited for Expanded Public Works • All bolts internal (no studs). • Rocla is will partner with Municipalities/
Programme (EPWP). • Easy relocation when required. communities to erect factories for large projects.
RANGE GUIDE

15
 Roadside Furniture

* Available at selected branches.

16
 Bus Shelters
2265 3660

2465 2465
SIDE WALL

BUS SHELTER

1665 1220
SIDE VIEW FRONT VIEW

Secure Signal Houses Roadside Dustbins

Notes: b) Resistantto vandalism and
fire
1. The exposed aggregate c) Maintenance free and long
Roadside Dustbin manufactured life design
by Rocla has become the standard d) Termite free
for use along major motorways e) No scrap value
and in picnic areas, effectively f) Large capacity 1000 x
replacing the traditional metal 1ooomm diameter
dustbin.
3. The Roadside Dustbin tackles
2. Special design features include: the challenges of litter control
a) Aesthetically pleasing by offering a quality long term
product that is cost effective.

* Available at selected branches.

17
18
 Penstock Rings

Approx
Size A B T Mass
mm mm mm mm kg
520 660 520 70 4o
900 1050 900 75 60

Retaining Walls
Notes:

Designed for lateral earth pressure of 8kPa/m and lateral surcharge

presure of 1,5kPa/m.
_______________________________________________________________

Stability checks (overturning, sliding, etc.) to be checked by the engineer.

Dimensions

H (mm) 600 900 1200 1500 1800 2100 2400 3000

B (mm) 300 450 600 750 900 1050 1200 1500
td (mm) 90 100 120 125 150 150 160 190
tl (mm) 80 100 120 125 150 150 160 230
tt (mm) 60 70 80 75 90 80 80 130
x (mm) 100 100 100 225 300 300 300 300
y (mm) 50 50 50 75 100 100 100 150
Length 1220 1220 1220 1220 1220 1220 1220 1220
a (mm) 223 322 417 485 580 642 718 981
b (mm) 110 147 189 224 269 302 341 405
Approx. mass (kg) 248 422 658 843 1223 1374 1639 2805

19
 Wash Troughs

Stock Troughs

STOCK TROUGH TYPES

Mark Type 1: 300mm diameter Type 2: 450mm diameter Type3: 600 diameter

A 2 580 2 580 2 580
B 640 710 710
C 2 445 2 445 2 445
D 362 533 680
E 155 155 175
F 235 315 390
G R150 R225 R300
Approx Mass: 194 kg 292 kg 371 kg
Volume: 90 Litres 200 Litres 350 Litres

20
ROCLA NATIONWIDE
Positioned to serve your needs, Rocla’s 11 factories are strategically located throughout South Africa’s nine
provinces and in Namibia and Botswana.

South Africa and offshore markets are cost effectively supplied by road, rail and sea.

Made by modern processes, supervised in accordance with the ISO 9001 Quality Management System,
Rocla’s factories make products that proudly carry the CMACS Mark of Approval.

• Head Office, Roodepoort: Tel: (011) 670-7600, Fax: (086) 677-1510

• Blackheath: Tel: (021) 905-1270, Fax: (021) 905-2913
• Newcastle: Tel: (034) 375-7848/9, Fax: (034) 375-6941
• Nelspruit: Tel: (087) 354-9202, Fax: (086) 681-1052
• Polokwane: Tel: (015) 293-1857/8, Fax: (015) 293-2821
• Port Elizabeth: Tel: (041) 486-1462, Fax: (041) 486-2835
• Roodepoort: Tel: (011) 670-7600, Fax: (086) 677-1510
• Virginia: Tel: (087) 354-8688, Fax: (086) 646-6291
• Stilfontein Depot: Tel: (010) 005-1703, Fax: (086) 685-1148
• Windhoek, Rocla Pipes: Tel: (002646) 126-3128, Fax: (002646) 121-5149
• Gaborone, Kwena Rocla: Tel: (00267) 390-4032, Fax: (00267) 390-7160

Email: [email protected]
Web: www.rocla.co.za