Tool Recognition Catalog

Tool Recognition Catalog
This manual applies to

all Beech, Hawker and Raytheon aircraft
Copyright ©2001 Raytheon Aircraft. All rights reserved.
P/N 979-33322
Issued: May 14, 2001
MASTER TOOL LIST CATALOG
Page Layout Guide

Each page references a particular tool, which may have
a mandatory, optional or general tool function.
Series Reference: Numerical listing of Tools with model group effectivity. [The model group effectivity is
shown to the right of the Tool Picture.] Example: 2009 is a Beech Optional tool as it is in the 2000 series.
Nomenclature: Tool Name/Description
Specification or additional data: Tool specification or alternate information.
Tool Picture: Shown when photo or sketch is available. Reference tools or similar tools may be shown.
Tool Manufacture: Source ( at least one is given.)
Qty: The quantity shown is the normal amount required for maintenance function. Additional model
requirements may be stated in the Specification or Additional Data area.
Model Line: The line of model names is shown with an “X” in the box of effected models
MASTER TOOL LIST CATALOG
2001
INDEX INFORMATION SHEET
A guide to using the Index with the

Master Tool Catalog
The Master Tool Catalog is organized by ATA index numbers. The first
index is listed by ATA. The first two numbers indicate ATA System, the
Third number indicates sub-system, and the last three numbers reflect a
numerical sequence similar to that used in the Hawker Illustrated Tool
and Equipment Manual (001 to 050 being Hawker tools, 051 to 199
being Beech or premier tools). Therefore, a number such as 070058
would show a tool in ATA 07 (Lifting and Shoring), sub-area 0 (lifting
and shoring) and tool sequence 058 (Beech/Premier tool). The Catalog is
organized by these ATA System Numbers in sequence.
The second index is by Tool Part Number. By looking up a tool part

number in alphanumerical sequence, one can find the ATA index
number. Then utilizing the Adobe Acrobat Bookmark index on the left
side of the screen, select the ATA reference and follow the sequence to
the numerical reference of the tool information.
The third index is by Series Reference. This series was setup in a direct
numerical line but does not currently follow the sequence in the catalog.
The original sequence was to indicate a tool as Mandatory, Optional,
General Tools and Discontinued. As use changed over time, some
references have been changed. The Usage cross-reference versus Series
is shown on each tool sheet to the right of the Tool Picture.
Series Reference 2009 would reflect a Beech Optional tool, number nine
in referenced numerical sequence.
Note: The index has no Hyperlinks to referenced numbers

INDEX BY ATA
ATA Tool Number Reference Nomenclature
000000 .TOOL PICTURE CATALOG. 0 PHOTOS AND SKETCHES OF REQUIRED TOOLS (Reference Introduction Page)
070050 50-590148 2010 3 CABLE SLING(90/A90/B90)
070051 18092 2002 HOISTING EYE BOLT
070052 300 2003 JACK, 3 POINT
070053 35-590006 2004 MAIN WHEEL AXLE JACK ADAPTER
070054 35-590064-1 & 35-590067 2005 AIRPLANE HOISTING SLING ASSY AND FITTINGS
070055 400 w/ 60-590013 & 60-590013-1 2006 JACK (DUKE ONLY)
070056 45A99201-1 2007 AIRPLANE HOIST
070057 117-590011-1 2001 AIRPLANE HOISTING SLING, 350 MODEL
070058 45A99515-1 2009 H. STAB. HOIST
070059 99-590029-1 2012 AIRPLANE HOISTING SLING
070060 95-590017 2011 AIRPLANE HOISTING SLING & ADAPTERS
070061 K-1073 2013 JACK PAD KIT (ADAPTS JACK PADS TO TRONAIR
070062 02-0522-0140 1001 JACKS (3 REQUIRED FOR MODEL 60)
070063 169-590014 2015 JACK PADS (except 24R)
070064 91-0504-0133 3001 JACK (AXLE)
070065 LOCAL PURCHASE 3002 PLUMB BOB
070066 45A99475-1 2008 WING HOIST
070067 122-100072-7 1009 JACK ADAPTER (3)
070068 02-0532-0110 1003 JACK (KA 200 W/HIGH FLOTATION GEAR, STARSHIP NLG)
070069 02-0530-0110 1002 JACK
070070 TK-1518 2014 JACK ADAPTER OR EYEBOLT/BUSHING KIT
070071 02-0536-0110 1004 HYDRAULIC AIRCRAFT JACK
070072 02-0544-0110 1005 JACK
070073 03-4006-0000 1006 JACKING STABILIZATION TAIL STAND
070074 045A-99225-01 1008 JACK PAD KIT
070075 35-590021 1010 TAIL SUPPORT ASSEMBLY W/WEIGHT
071002 ME7-2321C 5006 JACK, MAIN - WING
071005 ME7-3242A 5007 JACK, MAIN - TAIL
071007 ME7-4925 5008 JACK, WHEEL CHANGE-BOTTLE
071008 MET4210 5009 TRESTLE, SUPPORT, USE W/ 25Y331,332 & 535
071009 25Y13A 5001 PAD, TAIL JACKING
071010 25Y67A 5005 PAD, WING JACKING
071011 25Y331A 5002 BOARD, PROFILE, LEFT WING (REQUIRES TRESTLE MET4210)
071012 25Y332A 5003 BOARD, PROFILE, RIGHT WING (REQUIRES TRESTLE MET4210)
071013 25Y535A 5004 BOARD, PROFILE, FORWARD FUSELAGE (REQUIRES TRESTLE MET4210)
071019 25-9Y217-1A 6003 SLING, FUSELAGE
071021 25-9Y111-1A 6002 SLING, TAILPLANE
071023 25-8Y153-1A 6001 SLING, WING
071025 TK1814/932-3ASSYB 1232 NOSE JACK ADAPTER FITTING
071026 132-120022-3 1233 JACK PAD, MAIN LANDING GEAR
071027 02-7853-0100 2124 MAIN GEAR HYDRAULIC JACK
071028 01-1286-0000 2125 PORTABLE TOWBAR
071029 45A99147-1 2126 JACK PAD, SINGLE MAIN GEAR
080051 LOCAL PROCURE 3004 SCALE, 1 TO 5 THOUSAND LBS.
080052 LOCAL PROCURE 1013 PLUMB BOB (SMALL)
080053 114-590025-1 1012 PLUMB BOB SUPPORT
080054 LOCAL PROCURE 3003 SPIRIT LEVEL, 18 INCH OR MORE
080055 LOCAL PROCURE 3005 SCALE, 5 TO 15 THOUSAND LBS.
080056 122-590014-1 1011 TIE DOWN RING
082001 25Y21A 5010 BAR, TRANSVERSE LEVELLING
082002 25Y23A 5011 BAR, FORE AND AFT LEVELLING
082003 TB121 5012 CLINOMETER
082051 No. 98 1257 CALIBRATED SPIRIT LEVEL
090001 RM601 6009 TRACTOR, TUG
090051 169-590010-3 2018 MODEL 23 TOW BAR
090052 AS REQUIRED 3006 TOW TUG
090053 01-1202-0000 4002 MULTI HEAD TOW BAR
090054 01-0543-0000 4001 TOW BAR HEAD, DIAMOND/BEECHJET
090055 45A91715-1 1015 TOW BAR(BEECHJET & PREMIER)
090056 01-1179-0000 2016 TOW BAR, PORTABLE(BEECHJET)
090057 45-590075 1014 TRACTOR TOW BAR 33, 35, 55 & 95
090058 01-1109-0000 1016 TRACTOR TOW BAR
090059 105-590013-1 2017 MODEL 76 TOW BAR
090060 60-590014 2019 TOW BAR - MODEL 60
091001 25-6Y1647AB 6004 TOWBAR, (MOD. 253010B)
091003 25-9Y31-1A 5013 TOWBAR
091005 25-8Y77-1A 6007 ARM, STEERING (COLLAPSIBLE)
091009 25-6Y1659 6005 SHEAR-PIN, TURN (4 SUPPLIED WITH TOWBAR)
091010 25-6Y1661 6006 SHEAR-PIN, PUSH/PULL (4 SUP. WITH TOWBAR)
091011 25-9Y41-1A 6008 PIN, SHEAR-PIN (4 SUPPLIED WITH TOWBAR)
100051 114-590038-3 2028 NLG DOWNLOCK
100052 122-590016-19 2031 ENGINE INLET COVER
100053 122-590014-1 2030 TIE DOWN RING (2)
100054 101-590016-7 2021 GUST LOCK CONTROL
100055 122-590011-21 2029 GUST LOCK ASSY
100056 50-590180-1 2020 TAIL STAND ASSY.
100057 122-590016-3 2032 PROP SLING
100058 114-590023-1 2022 CONDENSER INLET COVER
100059 114-590038-1 2027 MLG DOWNLOCK
100060 114-590029-1 2026 ENG. AIR INLET COVER
100061 114-590028-9 2025 PROP SLING/EXH. COVER
100062 114-590024-8 2024 RH PITOT COVER
100063 114-590024-7 2023 LH PITOT COVER
100064 390-524063-0001 1234 GUST LOCK, CONTROL
101001 25Y1185A 6013 PLUG, WING STATIC SENSOR (STALL VENT)
101006 2-753A060 6010 COVER, PRESSURE HEAD
101040 25Y41AB 6015 COVER, MAINWHEEL
101041 25Y199AB 6014 COVER, NOSE WHEEL
101042 21Y723B 6011 COVER, ICE DETECTOR
101045 BCCH800-000-486 6016 COVER, WINDSHIELD (OR BAEREF000003787)
101050 25Y33A 5016 PIN, NOSE U/C LOCKING
101051 25Y197A 5015 PIN, MAIN U/C LOCKING
101052 25-8Y47A 5014 PLUG, STATIC VENT
101054 25-8Y211-1A 6012 COVER, COLD AIR UNIT EXHAUST
101057 JEC1510 6017 BLANK, DORSAL INTAKE (OR P/N 25-6Y1675)
101058 JEC1651 6018 COVER, APU EXHAUST - GARRETT (OR 25-8Y259-1A)
101059 JEC1652 6019 COVER, APU INTAKE - GARRETT
101060 JEC1653 6020 COVER, APU GENERATOR COOLING - GARRETT
120001 25-8Y103-1A 6035 BRUSH, WINDSCREEN STATIC DISCHARGE
120002 25Y1821-5A 6038 TOOL KIT, SERVICING TOOL KIT
120002 25Y1821-1A 5018 TOOL KIT, SERVICING TOOL KIT
120005 25-7Y19AB 6034 KIT, GENERAL TOOL
120006 25-9Y123-1A 6036 KIT, TOOL SERVICING
120031 25Y1121AB 6037 TOOLS, WING/STAB RETAINING RINGS
120051 TK 1729-4 2034 DEFUEL KIT(REF. MM 12-10-00)
120052 AS REQUIRED 3009 COMPRESSED NITROGEN (2000 PSI) WITH REGULATOR VALVE
120053 AS REQUIRED 3010 OXYGEN SERVICING EQUIPMENT
120054 314150 1021 GREASE NOZZLE, ALEMITE
120055 04-6150-5000 1017 CRANE - BOOM HEIGHT AT LEAST 12 FT.
120056 122-590015-1 2033 FUEL SUMP DRAIN
120057 Z737 3011 GREASE NOZZLE (NEEDLE TYPE)
120058 50-590106 1018 WRENCH - SUMP DRAIN
120059 AS REQUIRED 3008 LUBRICATING GUNS
120060 173784 3007 OXYGEN SERVICE ADAPTER
120061 122-590015-1 1020 FUEL SUMP DRAIN WRENCH
120062 TK1738-6/939-2 1019 O2 SYSTEM TEST EQUIPMENT
121001 M6380 6141 ADAPTER, PORTABLE OXYGEN CHARGING 9/16UNF-1/4BSP
121002 M6381 6142 ADAPTER, PORTABLE OXYGEN CHARGING 9/16UNF-3/8UNF
121003 NTG2604MSB 5022 GAUGE, TIRE PRESSURE
121004 10-4036-0010 6030 UNIT, TOILET SERVICING
121005 K1044 6052 COUPLING, TOILET SERVICING (FILL)
121006 K2029 6053 COUPLING, TOILET SERVICING (DUMP)
121007 25Y189A 5019 SPANNER, DE-ICING TANK CAPS
121008 25Y635AB 5020 ADAPTER, FUEL DRAIN
121010 772D33858S 6140 ADAPTER, OXYGEN CHARGING, 3/8UNF-1/4BSP
121011 772BMK2 5086 SET, INFLATION ADAPTER-LESS GAUGES
121018 06-5022-6500 5017 UNIT, HYDRAULIC & ENGINE OIL SERVICE
121018 FZ9-24-1500 5099 GAUGE, INFLATION ADAPTER - 0-1500 PSI
121019 04-6150-5000 6021 CRANE, UTILITY - REMOVAL OF HEAVY UNITS
121019 FZ9-24-600 5100 GAUGE, INFLATION ADAPTER - 0-600 PSI
121019 AN8508-22 5021 SPANNER, CROWS-FOOT, APU OIL FILLER CAP
121020 OW1012 6022 SPANNER, 5/16 X 3/8 WHITWORTH OPEN END
121024 0W1822 6026 SPANNER, 9/16 X 11/16 WHITWORTH OPEN
121026 OW2832 6028 SPANNER, 7/8 X 1" WHITWORTH OPEN ENDED
121028 1500P 6031 DRIVER, 1/4 HEX., TORQUE- SET DRIVE BITS
121029 1550P 6032 DRIVER, 5/16 HEX (FOR TRIWING BITS)
121030 212-1/4 6033 DRIVER, TORQ-SET,1/4UNF X 1/4HEX DRIVE
121032 851011 6040 STAGING, ACCESS FOR COMPLETE AIRCRAFT
121033 85JU10 6041 KEY SET, BRISTOL KEY SET OF TEN
121034 99-9008-6000 6042 CHOCKS, NOSE
121035 99-9015-6000 6043 CHOCKS, MAIN
121036 BAEREF000007634 6045 CYLINDER, OXYGEN REPLENISHMENT
121037 BAEREF000007650 6046 CYLINDER, NITROGEN REPLENISHMENT
121038 BV45 6047 TOOL BOX, ELECTROMECHANICAL TOOL BOX
121039 CUAE10 6048 TOOL KIT, LIGHT AIRCRAFT MAINTENANCE SET
121040 NA42265H2 6054 TROLLEY, OXYGEN REPLENISHMENT - BOTTLES NOT SUPPLIED
121041 NA42269-2 6055 TROLLEY, NITROGEN REPLENISHMENT - BOTTLES NOT SUPPLIED
121046 NB0075-1516 6056 KIT, WINDOW CLEANING KIT
121047 TW6AD 6057 DRIVE BIT, 5/16 HEX-1/4 TRIWING (W/S "C" PANEL)
122001 AVT300A 6044 WRENCH, TORQUE (40-300 LB/IN,3/8 SQ.)
122005 HTS2 6049 DRIVER, HI-TORQUE - ONE PIECE TOOL
122009 25Y1889-1 6039 DRIVER, HI-TORQUE-USE W/ DHS1421-D BOLTS
122012 25-9Y215-1A 6079 TOOL, FUEL SAMPLING (SEE 25-9Y385-1A)
200051 AS REQUIRED 3026 AIR PRESSURE SOURCE OF 9CFM/60PSI/0.1 H2O SEPARATOR
200052 06 7852 01 2036 CONTACT CRIMPER
200053 169-810000-601, -602 CODE 703 3014 LINE REAMER
200054 12350-032 3013 HARVARD TRIP BALANCE, DOUBLE BEAM, OHAUS
200055 105-10 3012 HUCK BOLT SPLITTER
200056 T1819AY 2047 UNIVERSAL WRENCH
200057 RB 6527-2 2046 REMOVAL TOOL
200058 PTF 7533 2045 YOKE ASSEMBLY
200059 PBH-FCHF-DPYS-8-10CB 2044 DEUTSCHE PULLER KIT (HERNDON)
200060 H7533 2043 HANDLE - #8 OR #10 FASTENER
200061 CP214C 2042 SQUEEZE
200062 CAZ1062-08-T10 2041 SPLIT RING INSTALLER
200063 CA18185-10-T13 2040 TO INSTALL CA18185
200064 CA18185-10-T12 2039 TO INSTALL CA18185
200065 AS REQUIRED 3028 PAINT GUNS (SUCTION TYPE) MINIMUM OF 2
200066 CA18185-10-T10 2037 TO INSTALL CA18185
200067 8501 3017 STATIC STATION, PORTABLE 3M
200068 CA2210T-08 (& -10) 2035 RETAINING RING INSTALLATION TOOL(TRIDAIR)
200069 TK2209-935 1032 M.O.V. TEST BOX
200070 TK2146/935-2 1031 DIGITAL LOW RESISTANCE OHMMETER (BIDDLE TESTER)
200071 LOCAL PROCUREMENT 1030 CORROSION TREATMENT FOR MAGNESIUM
200072 MODEL 77 1029 MULTIMETER, FLUKE
200073 UVX RADIOMETER 1028 ULTRAVIOLET IRRADIANCE TESTER
200074 14798 KIT 1027 FLUORESCENT PENETRANT INSPECTION KIT
200075 SRM 1850 1026 TEST BLOCK, FLUORESCENT PENETRANT
200076 ED 520 1025 EDDY CURRENT TESTER
200077 6200-3/16 BH-BNC (&-1/4) 1024 EDDY CURRENT TEST PROBES
200078 131387 1023 EDDY CURRENT CALIBRATION TEST BLOCK
200079 04-6012-1100 1022 WORK STAND - B5 TYPE
200080 CA18185-10-T11 2038 TO INSTALL CA18185
200081 AS REQUIRED 3031 BENCH DRILL PRESS
200082 M81969/14 3047 CONTACT INS/EXTRACT TOOL
200083 LOCAL PROCURE 3046 STRAP WRENCH
200084 HWP-12 3045 JO-BOLT INSTALLATION TOOL
200085 CTR-100-BNC-2 3044 COAX CABLE TERM. CRIMP TOOL
200086 AS REQUIRED 3043 DYE PENETRANT INSPECTION EQUIPMENT
200087 AS REQUIRED 3041 MAGNAFLUX EQUIPMENT - AVAILABLE
200088 AS REQUIRED 3039 PROTECTED AREA(75 DEG./DUST FREE/AIR FLOW)
200089 AS REQUIRED 3038 EXHAUST FAN
200090 AS REQUIRED 3037 ARC WELDING EQUIPMENT
200091 AS REQUIRED 3036 SMALL ROLL & BEADERS
200092 AS REQUIRED 3035 VACUUM CLEANER
200093 AS REQUIRED 3034 SMALL SHEET METAL HAND BRAKE
200094 6209B 3015 H.P. POWER SUPPLY
200095 AS REQUIRED 3032 BENCH GRINDER
200096 8060A FLUKE 3016 OHMMETER
200097 AS REQUIRED 3030 WORK BENCH & VISES
200098 AS REQUIRED 3029 HI LOK INSTALLATION TOOL
200099 AS REQUIRED 3027 CONTROL SURFACE PAINTING SUPPORTS
200100 AS REQUIRED 3042 GAS WELDING EQUIPMENT
200101 AS REQUIRED 3025 DYE PENETRANT INSPECTION EQUIPMENT
200102 AS REQUIRED 3024 SIX TO TEN POWER MAGNIFYING GLASS
200103 AS REQUIRED 3023 CHERRY & CHERRY-LOCK RIVETING TOOLS
200104 AS REQUIRED 3022 SET OF HAND TUBE BENDERS
200105 AS REQUIRED 3021 TUBE CUTTER & FLARING TOOLS-A/C TYPE
200106 AS REQUIRED 3020 SMALL SHEET METAL SHEARS-HAND TYPE
200107 AS REQUIRED 3019 RIVET GUNS & SETS
200108 AS REQUIRED 3018 ELECTRIC OR AIR HAND DRILLS
200109 NP45S 3048 BONDING BRUSH-PILOTED, STAINLESS STEEL
200110 AS REQUIRED 3033 CHAIN HOIST
200111 AS REQUIRED 3040 HIGH PRESSURE WATER SOURCE
210001 15-7600-1000 6058 UNIT, CABIN PRESSURIZATION
210002 ARIES30 6059 UNIT, AIR CONDITIONING
210003 K1498 6060 KIT, FOR CABIN PRESSURIZATION
210051 1E30-2 1042 FLOW CONTROL VALVE TEST BOX
210052 TK1794-5/939 2051 ADAPTER PLATE
210053 32448 2050 ANGLE GAUGE (SD-5 AIR COND. COMPRESSOR TOOL)
210054 32447 2049 DIP STICK (SD-5 AIR COND. COMPRESSOR TOOL)
210055 1222-36M 2048 MERCURY MANOMETER (TEST BENCH USE)
210056 129-000000/939 2052 SAFETY NET, FUSELAGE(1900D)
210057 LOCAL PURCHASE 3049 GAP TOOL (WIRE)
210058 97-000000/939-2 1045 SAFETY BELT, CARGO DOOR (1900D)
210059 LOCAL MANUFACTURE 1043 CABIN TEMPERATURE CONTROLLER
210060 1211-8W 1041 WATER MANOMETER (FOR A/C USE)
210061 97-000000/939-1 1040 SAFETY BELT, CABIN DOOR (King Air)
210062 129-000000/939-1 1039 SAFETY NET, CABIN DOOR(1900D)
210063 K1285 1038 KING AIR PRESSURIZATION ADAPTER KIT
210064 15-7602-1000 1037 GROUND PRESSURIZATION BLOWER,200CFM @ 12 PSI MIN.
210065 17600B 1036 AIR COND. SERVICING EQUIP.-CHARGING /W VACUUM(R134)
210066 16500 1035 REFRIGERANT LEAK DETECTION SYSTEM FOR R12/R134a
210067 10975 1034 AIR COND. SERVICING EQUIP.-CHARGING /W VACUUM, R12
210068 012-14830 1033 THERMISTOR VACUUM GAGE (MEASURES IN MICRONS) R12
210069 PDT286B 1044 JANITROL HEATER PRESSURE TESTER
210070 MODEL 913BB1AC 2123 TEMPERATURE BATH
210071 TE79-390NET/934-1 1235 SAFETY NET, CABIN DOOR
210072 K-2601 1236 CABIN PRESSURIZATION ADAPTER
230051 4328A 3050 MILLIOHM METER (CAPABLE OF 3 MILLIOHM)
230052 MODEL 2850 1046 MEGOHMMETER
230053 TS100 2128 ULB PORTABLE TEST SET
230054 9300A860 2129 CVR TEST PANEL
230055 17TES0200 2130 CVR AUDIO MONITOR ADAPTER
231001 20127-2 5023 EXTRACTOR, H.F.WIRE AERIALS
231002 25Y1525 5024 KEY, GRANGER STATIC DISCHARGER
238051 19B99500 1047 MAINTENANCE TERMINAL SOFTWARE(NOISE SUPPR.)
240001 WB808-4UNC 5033 SPANNER, TERMINAL NUTS (3.5LBIN)
240002 WB808-6UNC 5034 SPANNER, TERMINAL NUTS (9LBIN)
240003 WB808-10UNF 5028 SPANNER, TERMINAL NUTS PRE-SET 22LB-IN.
240004 WB808-1146 5029 SPANNER, TERMINAL NUTS (9LBIN) 6-32 UNC.
240005 WB808-1146B 5030 SPANNER, TERMINAL NUTS (6LBIN) 6-32 UNC
240006 WB808-1246B 5031 SPANNER, TERMINAL NUTS (3.5LBIN) 4/40UNC
240007 WB808-1346 5032 SPANNER, TERMINAL NUTS(22LBIN) 10-32 UNF
240008 029 5025 GAUGE, BATTERY TERMINAL GO/NO-GO
240009 BT51 5027 TESTER, BONDING - 0 TO 20,000 MILLI-OHM
240010 6024A 6062 UNIT, POWER SUPPLY - 0- 60 VOLTS, 0-10 AMPS
240011 778 6064 UNIT, GROUND POWER - 28V WITH 1100A LIMITER AND CAPABLE OF 1500A OUTPUT
240012 DHP801 6066 OHMMETER, SAFETY (INCLUDES CHARGER) - LOW VOLTAGE FOR EXPLOSIVE SYSTEM USE
240013 DHP8014 6067 CASE, FOR DHP801
240014 MODEL825MK2 6069 G.P.U., GROUND POWER UNIT - 2,000A OUTPUT
240015 M0DEL825MK4 6070 G.P.U., GROUND POWER UNIT - 2,000A OUTPUT
240016 M806 6071 METER, MULTI-METER
240017 WM6 6073 TESTER, INSULATION - 250 & 500 VOLT
240051 GPU150 2053 AUXILIARY POWER UNIT 12/24 VOLT
240052 D922-102-910001 2054 ALTERNATOR DRIVE GEAR WRENCH (58P)
240053 E100 1052 VOLTAGE REGULATOR TESTING EQUIPMENT
240054 LOCAL MANUFACTURE 1057 BATTERY MONITOR FUNCTIONAL TEST
240055 TK1999/935 1056 GENERATOR CONTROL TEST UNIT(BREAKOUT BOX)
240056 RF80H 1055 BATTERY TESTING/CHARGING EQUIPMENT(NI-CAD)
240057 GPU400 1053 EXTERNAL POWER UNIT 24 VOLT/300 CONTINUOUS
240058 DRC40-40B 1051 VARIABLE POWER SUPPLY
240059 BC-815A 1050 BATTERY CHARGER, JET ELEC BAT PACK
240060 AS REQUIRED 1049 BATTERY TESTING AND CHARGING EQUIPMENT(LEAD ACID)
240061 01-0314-02 1048 UNIVERSAL BREAKOUT BOX AND CABLES(RK2 & AFTER)
240062 JET-X II 1054 GROUND POWER UNIT 24 VOLT/300 CONTINUOUS
240064 TDMC-90 1237 LEAD ACID BATTERY CHARGER
243001 04-6014-0010 6061 HOIST, BATTERY - REMOVAL / INSTALLATION
243008 7072 5026 SPANNER, SEALING RING (PEDQ/F MK3 BATT)
243009 7101113 6063 KIT, MAINTENANCE (FOR 23491 BATT.)
243010 CS2395FTS 6065 SPANNER, TORQUE-TERMINAL NUTS (21LBIN)
243011 K2282 6068 HOIST, BATTERY - LEAD ACID (REQUIRED FOR USE WITH 04-6014-0000)
243012 MB25 6072 CHARGER, BATTERY CHARGER/ANALYZER
260051 HB1278 2055 HEATER PROBE JET CAL
260052 13060A 1059 SQUIB TESTER (HTL)
260053 45A01776/935 1058 ENGINE FIRE EXT/DET SYS TESTER
260054 MS3191-03 3051 CRIMPING TOOL
260055 MS90546-1 3053 EXTRACTING TOOL
260056 MS90455-1 3052 INSERTION TOOL
261001 IT714 5037 TONGS, HEATING - REAR BAY DETECTORS
261002 21Y2577A 5035 ADAPTER, TORQUE LOADING - FIREWIRE COUP
262001 TS2E13A 5038 ADAPTER, BOTTLE GONE INDICATOR
262002 6240-99-9951230 5036 FILAMENT, SPARE FILAMENT FOR TS2E-13A
270001 T5-2002-401-00 5057 TENSIOMETER, CABLE
270002 25Y493AB 5054 SET, RIGGING PIN
270003 25-7Y15A 5041 PIN SET, RIGGING PIN SET
270004 25-8Y59-1A 5046 SET, RIGGING PIN
270005 25-9Y277-1A 5049 PIN SET, RIGGING PIN SET
270006 25-9Y113-1A 6075 PIN SET, RIGGING PIN SET
270050 045A-99144-001 1060 RIG PIN SET
270051 122-062009-35 2059 SPANNER WRENCH (FWD WING)
270052 T5-2002-104-00 1082 TENSIOMETER
270053 TS 1171 1083 TORQUE ADAPTER, NUT-FLIGHT CONTROL SYS
270054 TP222 1081 CABLE TENSION METER
270055 810-45-135030-9 1077 TRIM TAB FREE PLAY CHECK FIXTURE
270056 36D2844 3054 BUBBLE PROTRACTOR
270057 TE-100TB 1230 UNIVERSAL TRAVEL BOARD
271001 25-6Y1729AB 5040 GAUGE, AILERON GEARED TAB
271002 25-8Y109-1A 5042 EXTRACTOR, AILERON OUTER HINGE BOLTS
271003 25Y283AB 5053 PLATE, AILERON RIGGING
271004 25-6Y1665A 5039 PLATE, AILERON RIGGING
271005 25-8Y35-1A 5045 PLATE, AILERON RIGGING
271051 LOCAL MANUFACTURE 1086 ELEVON CONTROL MIXER RIG PIN
271052 TE792003/935-1 1088 HYD. LOCK SOLINOID BREAKOUT BOX
271053 122-410700-25 1067 FWD WING RIG PIN
271054 122-130000-4/D810-4 1065 ELEVON TRAVEL BOARD
271055 122-130000-3/D810-3 1064 ELEVON TRAVEL BOARD
271056 045A-99228-001 1062 PROTRACTOR ASSY
271057 045A-99226-001 1061 PROTRACTOR ASSY
271058 LOCAL MANUFACTURE 1085 RIG PIN ELEVON
271059 TE792003/935-1 1080 BREAKOUT BOX FWD WING
271060 KS5549 1238 DIGITAL PROTRACTOR
271061 390-524001-0001/917 1239 RIG PIN SET
272002 25-8Y97-1A 5048 GAUGE, RUDDER TRIM AND GEARED TAB (REPLACES 25Y1093)
272004 25-8Y91-1A 5047 GAUGE, RUDDER MOVEMENT (REPLACES 25Y75A/B)
272051 122-630000-3/D810-1 1074 RUDDER L/H TRAVEL BOARD
272052 122-630000-4/D810-2 1075 RUDDER R/H TRAVEL BOARD
272053 LOCAL MANUFACTURE 1084 RIG PIN RUDDER
273001 25-8Y121-1A 5044 PROTRACTOR, STALL VANE
273002 25-9Y79-1A 6152 JIG, SETTING - L.E. STALL TRIGGER
273003 25-9Y85-1A 5051 CLIP, ELEVATOR COMPENSATOR
273004 25Y73A 5055 PLATE, ELEV. RIGGING-USED W/ 25-8Y11-1A or 25Y195A
273005 25-9Y301-1A 5050 PLATE, ELEV. RIGGING-USE W/25-8Y11-1A
273051 122-620000-2/K41499 1073 FORWARD WING TRAVEL BOARD
273052 122-620000-1/K41498 1072 FORWARD WING TRAVEL BOARD
273053 122-610000-6/D810 1071 ELEVATOR TRAVEL BOARD
273054 122-610000-5/D810 1070 ELEVATOR TRAVEL BOARD
273055 122-610000-2/D810 1069 FLAP TRAVEL BOARD
273151 1952-1-3-5 1076 STALL WARNING FORCE APPLICATOR
273152 SK100360 (SAFE FLIGHT) 1079 STALL WARNING BREAKOUT BOX
273153 122-040149/935 1063 STALL WARNING BREAKOUT BOX
273154 990-4 1078 STALL WARNING FORCE APPLICATOR
274001 25Y195A 5052 BOARD, HORIZONTAL STABILIZER
274002 25-8Y11-1A 5043 BOARD, INCIDENCE - HORIZONTAL STAB.
275001 25Y829A 6076 BOARD, WING INCIDENCE
275004 25Y831A 5056 PLATE, FLAP RIGGING
275005 25-8Y191-1A 6074 GAUGE, ASSEMBLY - FLAP RIGGING
275051 122-381014/935 1066 FLAP ACT TEST BOX
275052 122-610000-1/D810 1068 FLAP TRAVEL BOARD
275053 TE79-390BLDN/939 2127 BLOW DOWN CHARGING TOOL
277051 122-590011-17 2056 CONTROL LOCK
280001 25-9Y385-1A 5062 TOOL, FUEL SAMPLING (REPLACES 25Y1125AB OR 25-9Y215-1A)
280064 LOCAL PROCURE 3055 FIRE EXTINGUISHER, ABC TYPE
280065 07-3005-6900 1240 FUEL SAMPLEUNIT W/.125 HEX ADAPTER
282001 25YTS303R1A 5064 ADAPTER, FUEL FLOW TEST
282002 25YTS303R17A 5063 ADAPTER, FUEL FLOW TEST-USE W/25YTS303R1A
282003 TS120R133A 6086 ADAPTER, VENTRAL TANK FUEL
282004 TS120R141A 6087 ADAPTER, VENTRAL TANK FUEL FLOW CHECKS
282005 TSM4445F4F40SS 5065 HOSE, FLEXIBLE, USE W/ 25YTS303R1A & 25YTS303R17A
282006 25-9Y115-1A 6078 EQUIPMENT, HANDLING - VENTRAL TANKS
282007 25Y867A 6080 ADAPTER, FUEL TANK DRAIN
284001 0602KQC03 5060 TEST SET, FUEL INDICATING SYSTEM
284002 0208KAQ01 5058 CABLE KIT, USE WITH 0602KQC03
284003 0216KAQ01 5059 CABLE KIT, USE WITH 0602KQC03
284004 0801KQC02 5061 CABLE KIT, USE WITH 0602KQC03
284006 CGA111 6084 CABLE, FOR USE WITH QAA (700 SERIES 7001-20 ONLY)
284007 242BTE 6077 CABLE, FOR USE WITH QAA
284008 QAA 6085 TESTSET, FUEL INDICATING SYSTEM
284009 CGA110 6083 ADAPTER, FOR USE WITH QAA
284011 CGA109 6082 ADAPTER, FOR USE WITH QAA
284012 CE1 6081 CABLE, FOR USE WITH QAA
284051 TE79-400A/935 1098 FUEL QUANTITY TESTER
284052 TE79-2001/935-2 1097 FUEL QUANTITY SYSTEM ANALYZER
284052 101-00477B 1090 FUEL QUANTITY TEST CABLE -FUSELAGE TANK
284053 DC400 W/KA MODULE 101-00802 1096 FUEL QUANTITY TEST EQUIPMENT-GULL
284054 2548H 1095 FUEL QUANTITY TEST EQUIPMENT -CONSOLIDATED
284055 118-389004/935 1094 FUEL QUANTITY PROBE BREAKOUT TEST(UC/UE)
284056 101-00814 1092 FUEL PROBE ADAPTER
284057 LOCAL PROCURE 3056 EXPLOSION PROOF LIGHT
284058 101-00489 1091 FUEL QUANTITY TEST CABLE - BRANSON TANK
284059 114-389001/935 1093 FUEL QUANTITY PROBE BREAKOUT TEST(UA/UB)
284060 101-00477A 1089 FUEL QUANTITY TEST CABLE - WING TANK
284061 390-000011/917-29 1241 FUEL CALIBRATION HARNESS
284062 390-100001/917-12 1242 FUEL PROBE SELECTOR
290003 KHC1005 5069 ADAPTERS, HYDRAULIC ADAPTER KIT FOR TRONAIR RIG
290006 05-3005-1100 6088 TEST RIG, HYDRAULIC SYSTEM - 6GPM FLOW RATE (17% LESS FOR 50Hz MAINS)
290007 AGS773 6091 TOOL, PIPE FLARING (5/8"- 1-1/4")
290008 J6615ITEM3 6093 EXPANDER, USE W/ AGS773 FLARING STAINLESS STEEL TUBE
290010 AGS772 6090 TOOL, PIPE FLARING (3/16"-1/2")
290011 05-7022-1100 6089 TEST RIG, HYDRAULIC SYSTEM - 15GPM FLOW RATE (17% LESS FOR 50Hz MAINS)
290051 05-7015-1100 1099 HYDRAULIC POWER UNIT
290052 KHC-1004 1100 COUPLING KIT
291001 25Y1223 5066 ADAPTER, TORQUE LOADING
291002 FHQ100 5068 TOOL, SEAL MANIPULATING
291003 BAEREF000003812 5067 KIT, HYDRAULIC SYSTEM
300001 T300-120A 6097 TOOL, CLENCHING, SIMPLIFIX DE-ICE COUPLINGS
300002 T300-112A 6096 TOOL, CLENCHING, SIMPLIFIX DE-ICE COUPLINGS
300051 XW20509 2062 WIPER ARM TENSION ADJUSTMENT WRENCH
300052 74-451-74 1102 BFG RUBBER HAND ROLLER
300053 343 1101 PNEUMATIC TEST UNIT
300054 JGA75X 3057 SPRAY GUN, DEVILBISS OR BINKS
300055 NO 4 FORD CUP 3058 PAINT MIX CUP
300056 101-524887/935 2058 TEST TOOL ELEC CLUTCH (LOCAL MANUFACTURE)
300057 101-524887/934 2057 TEST FIXTURE ELEC CLUTCH (LOCAL MANUFACTURE)
304001 25YTS31E5A 6095 TESTSET, WINDSCREEN GOLD FILM
308001 WB808-1680 5070 INDICATOR, ICE DETECTOR TORQUE
310051 128-11218/935 1103 TAIL DE-ICE TEST SET
320001 125REF000000026 6098 MACHINE, AUTOMATIC WHEEL CRACK DETECTOR
320002 CCM150 6124 WRENCH, TORQUE (10-150 LBFT)
320003 QUICKSET 6133 DRIVER, TORQUE, 1-4 SQ DRIVE (CAPACITY 5-45 LBIN)
320004 DH344 6125 SOCKET, 11/32AF X 1/4 SQ.DRIVE
320005 FGK10 6126 PROBE, KNIFE FERROUS (USE WITH BR73)
320006 SSDRT1-2 6136 HEAD, 1-2 IN SQUARE DRIVE RATCHET - FOR USE WITH CCM150
320007 NFT 6132 PROBE, PENCIL NON-FERROUS (WITH BR73)
320008 NFK11 6131 PROBE, KNIFE NON-FERROUS (WITH BR73)
320009 MODEL4A 6130 FLYPRESS, STANDARD
320010 HEADSETBR73 6129 HEADSET, FOR BR73
320011 HB1625 6128 SOCKET, NLG WHEEL AXLE NUTS - 1 5/8" AF x 3/4" DRIVE
320012 FT 6127 PROBE, PENCIL FERROUS (USE WITH BR73)
320051 045A-99142-001 1104 PIN PULLER
320052 50-590019 2067 BRAKE CYLINDER SPANNER WRENCH
320053 180131 2066 LANDING GEAR OVERLOAD CLUTCH(MECH GEAR)
320054 169-810031 CODE 917 2065 MAIN GEAR SHOCK DISC COMPRESSOR KIT
320055 115-590023-1 2063 MAIN STRUT EXTENSION LIMITER
320056 LA4CR1000/NAS 1756-24 2068 LANDING GEAR PINS (1) (NOSE L. GEAR LOCK)
320057 API1549-3 2078 POWER STEERING BREAKOUT BOX(AIRIGHT, UA/UB)(MM 32-
320058 115-590035 2064 NOSE LANDING GEAR SHOCK STRUT LIMITER
320059 LA7CR2500/NAS 1756-24 2070 NOSE GEAR DOOR PIN
320060 MODEL 4005 2072 HAND PRES. POT BLEEDER
320061 TK229-1/939 2073 MECHANICAL HYD PUMP(HYD GEAR ONLY)
320062 TK229/939 2074 HAND HYD PUMP(ALTERNATE-HYD GEAR ONLY)
320063 TK889-2 D928 2075 BLEEDER HOSE ADAPTER
320064 122-810001/935-1 1122 MAIN GEAR TEST BOX
320065 114-380045/935-1 2077 POWER STEERING BREAKOUT BOX (DECOTO, UC-UE)
320066 AN8508-28 1110 CROW FOOT WRENCH ( M. GEAR AXLE NUT, 1 3/4")
320067 114-820000-939 2079 CENTERING TOOL - NOSE GEAR STEER(DECOTA)
320068 114-380045/935 2076 POWER STEERING BREAKOUT BOX (DECOTO, UC-UE)
320069 LOCAL MANUFACTURE 1112 TEST CIRCUIT FOR LANDING GEAR TIME DELAY
320070 TK1763-7/935 1118 MLG SWITCH TEST BOX
320071 TK1763-5/935 1117 MAIN GEAR POSITION SWITCH TEST BOX
320072 TK1763-2/935 1116 NOSE GEAR POSITION SWITCH TEST BOX
320073 T-00741 or TK2281/936 1115 SHIMMY DAMPNER TOOL
320074 50-590078 2080 LANDING GEAR CLUTCH WRENCH(MECH GEAR SYS)
320074 T-00690 1114 GLANDNUT WRENCH
320076 122-820000/935-2 1108 NOSE GEAR TEST BOX (MM 32-60-00)
320077 M400 2071 TIRE SEALANT INJECTOR
320078 122-820000/935-2 1121 NOSE GEAR TEST BOX
320079 AS REQUIRED 1111 TEST GAUGE HYDRAULIC (0-1600 PSI)
320080 45-590074-7 1109 LANDING GEAR TENSION GAGE ASSEMBLY
320081 122-810001/935-1 1107 MAIN GEAR TEST BOX (MM 32-60-00)
320082 114-810055-939 1106 WHEEL DRIVE CLIP (1900 SERIES)
320083 06-4005-0501 1105 HYDRAULIC HAND PUMP (0-3000 PSI)
320084 122-590017-3 1119 NOSE GEAR DOOR LOCKPIN
320085 TK889-2D928 1120 BLEEDER HOSE ASSY. - LOCAL MFG.
320086 LOCAL PROCURE 1113 STEERING ANGLE PROTRACTOR
320087 LA4CR1500/NAS 1756-24 2069 LANDING GEAR PINS (2) (MAIN L. GEAR LOCK)
320088 14-4039-0000 3059 TIRE BEAD BREAKER (MANUAL) & SAFETY CAGE
320089 LOCAL PROCURE 3060 ULTRASONIC CLEANER
320090 3000 PSI GUAGE 1243 LARGE DIAL PRESSURE GAGES 0-3000 PSI +/- 1/2%
321002 25Y1491-31A 5075 CLAMP, MAIN LANDING GEAR DOOR JACK
321003 25Y1883-1A 5077 SPANNER, SIDE STAY RETAINING NUT (REPLACES 25Y259A)
321005 25Y261A 5082 SPANNER, SIDE STAY LOCATING PIN
321006 25Y613AB 5083 SPANNER, MAIN GEAR GLAND NUT
321007 25-9Y15-1A 5072 SPANNER, GLAND SEAL
321008 25Y759A 5085 ADAPTER, OLEO OIL CHARGING
321010 25-9Y7-1 5074 SPANNER, ORIFICE HEAD
321011 25-9Y9-1A 6102 SPANNER, FLUTTER GUIDE PLATE
321013 25-9Y11-1A 6099 SPANNER, RING NUT
321016 25-9Y17-1A 6100 SPANNER, RING NUT OIL HEAD
321018 25-9Y87-1A 6101 FIXTURE, HOLDING - MAIN U/C LEG
322001 25Y237A 5078 SPANNER, NOSE GEAR GLAND NUT
322002 25Y239A 5079 SPANNER, NOSE GEAR AXLE RETAINING NUT
322003 25-9Y27-1A 5073 ADAPTER, OIL CHARGING MLG/NLG
322004 25Y1363A 6105 EXTRACTOR, LOCATOR NLG
322005 25Y1323 6104 PIN, NOSE LEG OLEO ALIGNMENT
322006 25Y235A 6106 SPANNER, ORIFICE PLATE - NOSE LEG
322007 25Y241A 6107 SPANNER, RET. NUT PRESSURE NLG
322009 25Y1319A 6103 FIXTURE, NOSE OLEO HOLDING
322010 TK2092/917 1244 LANDING GEAR PIN PULLER
324002 25Y1817A 5076 TOOL, COMPRESSION, PARKING BRAKE SPRING STRUT
324003 AA1377 6113 FIXTURE, BRAKE ROTOR ALIGNMENT
324005 SA30088 5101 FIXTURE, BRAKE ROTOR ALIGNMENT (REPLACES AA1377)
324006 AA1388 6114 EXTRACTOR, MAIN WHEEL
324007 A11262 6111 EXTRACTOR, MAIN WHEEL
324008 SA30090 6135 EXTRACTOR, MAIN WHEEL (REPLACES AA1388)
324009 AM21749-1 6117 FIXTURE, BRAKE PAD RIVETING
324011 A0101795 5087 GAUGE, TENON WEAR
324012 A0107745 5088 SPANNER, MAXARET HYDRAULIC COUPLING
324013 A0109691 5089 TOOL, MAXARET INSTALLATION/EXTRACT
324014 A0115986 5090 GAUGE, HEAT PACK WEAR
324015 A0117370 5091 GAUGE, HEAT PACK WEAR
324017 SAM20084 5103 GAUGE, HEAT PACK WEAR (EQUV. TO A0125601)
324018 A10444 6110 MACHINE, TIRE REMOVAL
324019 A11921 5094 TOOL, BRAKE RESETTING
324020 A16803 6112 TOOL, BRAKE RESETTING, IN-SITU
324021 SA30089 5102 TOOL, BRAKE RESETTING, BRAKES IN-SITU (REPLACES A 16803)
324025 25Y249AB 5080 SPANNER, MAIN GEAR AXLE RETAINING NUT
324026 25-9Y13-1A 5071 SPANNER, MAIN GEAR AXLE RETAINING NUT
324027 25Y257A 5081 SPANNER, MAXARET RETAINING NUT
324028 25Y725A 5084 SPANNER, MAIN WHEEL NUT
324029 AM23076 6118 TOOL, LOADING/& EXTRACTION, BRAKE PISTON
324030 AM23077 6119 TOOL, CLAMPING PLATES, BRAKE STATOR
324031 AM23104 6120 DEVICE, LOAD CHECKING, PISTON/ LINER
324032 AM24562 5096 EXTRACTOR, MLG WHEEL DRIVE BLOCK
324036 A125529 5092 TOOL, MAXARET INSTALLATION/EXTRACT
324037 A11848 5093 FIXTURE, BRAKE ROTOR ALIGNMENT
324037 AM20747 6115 RING, PRESSURE, NOSE WHEEL-USE W/ A10444
324038 AM23911 5095 TOOL, MODULATOR ALIGNMENT
324038 BAEREF000007007 6121 TEST BLOCK, FERROUS FOR USE WITH BR73
324039 D755-1 5097 MACHINE, WHEEL BALANCING
324039 BR73 6123 DETECTOR, EDDY CURRENT CRACK
324040 BAEREF000007008 6122 TEST BLOCK, NON FERROUS FOR USE WITH BR73
324040 ESP2092 5098 PUMP, OLEO HYD. REPLEN. RIG
324041 AM20749 6116 RING, PRESSURE, MAIN WHEEL-USE W/ A10444
324041 SA010321 6134 GAUGE, PAD WEAR
324042 A0103065 6108 PEG, PEENING (USE WITH AM21749-1)
324043 A0106115 6109 SPANNER, TORQUE (VALVE CORE)
330051 TK-1521 3061 INSTRUMENT POST LIGHT WRENCH
330052 581-901 2081 BULB REPLACE TOOL, INDICATOR
330053 DB45-B1 1123 T- LIGHT COMPARATOR (350, 1900 & BJ ONLY)
330054 UBF93110-TU 1254 LIGHTING TEST UNIT
334001 FMG4400D 2131 FLASH MEASURING GUN
340051 NAV 401 3065 VOR/ILS TESTER, RAMP
340052 ATC-601 3064 TRANSPONDER RAMP TEST SET
340053 TK1783-1/939 4005 PITOT STATIC TESTER
340054 1811-F-D 3062 PITOT STATIC TEST SET
340055 PSS88364-3-4-4 1126 NAV-AIDS PITOT STATIC ADAPTER (STARSHIP)
340056 PSS88340-3-4-4 1125 NAV-AIDS PITOT STATIC ADAPTER (1900)
340057 TK1783-3/939-1 1124 PITOT ADAPTER
340058 ATC-600 3063 DME RAMP TEST SET
341001 WIDS107G 5111 ADAPTER, STALL VENT
341002 20293 5105 ADAPTER, PRESSURE HEAD
341003 25YTS129R21A 5107 ADAPTER, STATIC VENT PLUG
341004 25YTS129R23A 5108 BLANK, STATIC VENT
341005 ADTS405F 6137 TEST SET, AIR DATA SYSTEM - PITOT STATIC
341006 884FG 5109 ADAPTER, PRESSURE HEAD
341007 NAV402AP 6139 TEST SET, MARKER/NAV/COMM
341008 25Y-TS340E1A 5106 TEST SET, STALL IDENT MAINTENANCE CHECK
341008 ATC600A 6138 TEST SET, TRANSPONDER/DME
341009 CE2-40 5110 KEY, CORRECTOR - SMITHS A2B COMPASS
350051 4460102-2 1127 TOOL, O-RING REPLACEMENT (O2 SHUTOFF VALVE)
350052 P4924-26H-01SA 4003 PURGE ADAPTER,O2
351001 510057 5112 ADAPTER, FOR OXYGEN FUNCTION TEST
351002 BAEREF000003243 5113 FLOWMETER, FOR CHECKING CREW OXYGEN MASK
351003 R2-21A5 5114 SEAL, USED W/ 510057, OXYGEN SYSTEM TEST
390051 AS REQUIRED 3066 SOLDERING EQUIPMENT
390052 AS REQUIRED 3067 TERMINAL INSTALLATION EQUIPMENT
390053 AS REQUIRED 3068 WIRE STRIPPER
490001 25-8Y309-1A 5116 HOIST, A.P.U. (TURBOMACH)
490003 25-8Y215-1A 5115 STAND, A.P.U. (TURBOMACH)
510001 25Y587A 6145 BOARD, HORIZONTAL STABILIZER DIHEDRAL
510002 25-8Y15-1A 6143 BOARD, HORIZONTAL STABILIZER DIHEDRAL
510003 25Y19A 6144 BOARD, WING DIHEDRAL
510051 NDT-12 2083 ULTRASONIC UNIT
510052 RD-375 2084 PROBE, ULTRASONIC
510053 STO-3998 2085 PROBE, A. SCANNER
510054 8825 1128 VACUUM VALVE/ADAPTER
510055 IF-ND3-30 1129 BOROSCOPE
510056 MIA-2500 2082 A. SCANNER
510057 TS 1469 2086 TAP HAMMER
520051 101-590052-1 1130 CARGO DOOR LATCH WRENCH(CARGO DOOR AND 1900)
520052 101-590053-1 2087 CARGO DOOR CLOSING AID (CARGO DOOR ONLY)
521001 25Y1555A 5117 KEY, WINDING - CABIN DOOR
521002 25Y1553A 6146 DRUM, TORQUE LOADING - ENTRY DOOR TENSATOR
550071 35-590087-1 1143 JIG ASSEMBLY - DIFFERENTIAL MECHANISM
550074 TK2032 2088 SPANNER WRENCH
552051 810 115-590033 1141 ELEVATOR TRAVEL GAUGE (MODEL 99/100) *
552052 810-1 50-610000 1134 ELEVATOR MODEL (90 SERIES, EXCEPT F90) *
552053 807 101-610000-1/-2 1133 ELEVATOR & ELEVATOR TRIM TAB (F90/200/B300/1900)*
552054 35-590076 1144 SHAFT ASSEMBLY - DIFFERENTIAL MECHANISM
552055 810-1 95-524000 1131 ELEVATOR & ELEVATOR TAB TRAVEL GAUGE (MODEL 55/58/
552056 D810-130-610000-87/-88 1135 ELEVATOR TAB (MODEL 1900 UE)
552057 810 50-590096 1136 ELEVATOR TAB TRAVEL GAUGE (90 SERIES, EXCEPT F90)
552058 810 130-610000 1137 ELEVATOR TAB TRAVEL GAUGE (MODEL 350)
552059 810-3 35-660040 / -1 (LH/RH) 1138 ELEVATOR TRAVEL GAUGE (MODEL 33/35/36) *
552060 807 60-610000 RH & LH 1132 ELEVATOR & ELEVATOR TAB TRAVEL GAUGE (MODEL 60) *
552061 810 35-660043-2 1142 ELEVATOR TRIM TAB GAUGE (MODEL 33/35/36) *
552062 810-1 50-590095 1140 ELEVATOR TRAVEL GAUGE (MODEL 90, EXCEPT F90)
552063 810-5 35-660040 / -1 (LH/RH) 1139 ELEVATOR TRAVEL GAUGE (MODEL 33/35/36) *
554051 807 101-630000-1 1145 RUDDER & RUDDER TAB TRAVEL GAUGE (F90/200/300/350)
554052 807 60-630001 1146 RUDDER & RUDDER TAB TRAVEL GAUGE (MODEL 60) *
554053 810-2 114-630000-1 1148 RUDDER TAB TRAVEL GAUGE (MODEL 1900 UC)
554054 810 130-630000-1 1149 RUDDER TAB TRAVEL GAUGE (MODEL 350/1900 UE)
554055 810 96-630000-1 1150 RUDDER TAB TRAVEL GAUGE (MODEL 55/58/58P)
554056 810 96-630000-207 1151 RUDDER TAB TRAVEL GAUGE (MODEL 90,EXCEPTF90/99/100)
554057 D807-1 114-630000-1 1152 RUDDER TRAVEL GAUGE (MODEL 1900 UE)
554058 807 114-630000-1 1153 RUDDER TRAVEL GAUGE (1900'S,UA-UC)
554059 810 33-524000 1154 RUDDER TRAVEL GAUGE (33/36) *
554060 810 96-524000 1155 RUDDER TRAVEL GAUGE (MODEL 55/58/58P/90, EXCEPT F90)
554061 810 115-590039 1156 RUDDER TRAVEL GAUGE (MODEL 99/100)
554062 810-1 114-630000-1 1147 RUDDER TAB TRAVEL GAUGE (MODEL 1900 UA-UB)
560051 966A1 1157 OPTICAL MICROMETER
561001 ENG17099 5118 BOLT, SLAVE BOLT FOR WINDSCREEN
561002 W10-06-1 6147 WRENCH, HEX-INTERNAL
570001 25-8Y195-1A 6150 EXTRACTOR, WING/FUSELAGE DRAG SPIGOT
570002 25-8Y197-1A 6151 SPACER, SET -WING/FUSELAGE DRAG SPIGOT
570051 TS1176-7 1177 WING BOLT NUT TORQUE ADAPTER 25/32" EXT. WRENCH
570052 TK-2031/TC917 1171 TORQUE ADAPTER
570053 TK1817 922-5 1174 WING BOLT WRENCH 15/16" BOX END
570054 TK1817 922-4 1173 WING BOLT WRENCH 13/16" BOX END
570055 TS1176-10 (TS1171-10) 1176 WING BOLT NUT TORQUE ADAPTER 15/16" EXT. WRENCH
570057 TK1817 922-6 1175 WING BOLT WRENCH 1" BOX END
570058 50-590013-1 1172 WING BOLT NUT TORQUE ADAPTER
570063 1751DIN 1188 TORQUE WRENCH 1/4 DRIVE,0-75 IN/LBS(3 ELEMENT)
570073 TS1176-1 4004 WING BOLT NUT TORQUE ADAPTER 3/4" INT. WRENCH
570074 35-588 S 1158 WING HINGE PIN INSTALLATION TUBING
570075 122-620010/934-1 2089 FREE PLAY TESTER
570076 AS REQUIRED 2090 WING & FUSELAGE CRADLES OR EQUIVALENT
570077 TS1187-1 2091 WING BOLT WRENCHES (BONANZAS D1-D1501)
570078 TS1195 2092 WING BOLT WRENCH (BONANZAS D1-D1501)
570079 TS1222-1 2093 WING BOLT NUT SPIN ON WRENCHES 7/8" INT. WRENCH
570080 10996 PIN 1186 ALIGNMENT PIN LOWER FORWARD WING(3 ELEMENT)
570081 TS1222-4 2095 WING BOLT WRENCH 9/16" INT. WRENCH
570083 AS REQUIRED 3069 CONTROL SURFACE BALANCING EQUIPMENT
570084 11001 1187 TORQUE ADAPTER LOWER FORWARD WING(3 ELEMENT)
570085 50-590014 1185 WING BOLT WRENCH 1 1/16" EXT. WRENCH
570086 TS1584N 1184 WING BOLT WRENCH 1 1/16" EXT. WRENCH
570090 TS1176-2 (TS1171-2, TS1222-2) 1180 WING BOLT NUT TORQUE ADAPTER 7/8" INT. WRENCH
570091 TS1222-2 2094 WING BOLT NUT SPIN ON WRENCHES 3/4" INT. WRENCH
570092 TBD 1245 ALIGNMENT TOOL FOR L.E. RIB INSTALLATION (MYLAR DRAWING)
570093 TBD 1246 ALIGNMENT TOOL FOR L.E. INSTALATION (MYLAR DRAWING)
575052 D810 118-521046-1/-2 1170 FLAP TRAVEL GAUGE (MODEL 1900 UC & UE)
575053 D810 114-521021-1/-2 1169 FLAP TRAVEL GAUGE (MODEL 1900 UA & UB)
575054 810-2 96-524000 2096 FLAP TRAVEL GAUGE (MODEL 58P/60)
576051 LOCAL MANUFACTURE 1087 OUTBOARD WING SECTOR RIG PIN
576052 810-1 60-130001 1166 AILERON TAB TRAVEL GAUGE (MODEL 60) *
576053 810-1 101-130001-1 1167 AILERON TAB TRAVEL GAUGE (MODEL 300/350/1900UA
576054 810-1 35-135025-79 RH 1165 AILERON TRAVEL GAUGE (MODEL 55/58/58P) *
576055 810-1 35-135025-78 LH 1164 AILERON TRAVEL GAUGE (MODEL 55/58/58P) *
576056 810-1 118-130000-1/-3 1163 AILERON TRAVEL GAUGE (1900 UC & UE)
576057 810 99-524000 (LH & RH) 1162 AILERON TRAVEL GAUGE (F90/99/100/200/300/350/1900
576058 810 60-130001 1161 AILERON TRAVEL GAUGE (MODEL 60) *
576059 810-1 50-590091 1160 AILERON TRAVEL GAUGE (MODEL 90 EXCEPT F90)
576060 810 50-590091 1159 AILERON TRAVEL GAUGE (MODEL 33/35/36) *
576061 810-2 118-130000-1 1168 AILERON TAB TRAVEL GAUGE (MODEL 1900 UC & UE)
610051 TK 1980/928-1 1197 PROP BOLT TORQUE ADAPTER
610052 TK1573-918 1202 FEEDBACK RING PULLER - 3 BLADE
610053 60-960000/D922 2103 PROP BOLT TORQUE ADAPTER WRENCH
610054 9110 2102 JUNCTION BOX-CHADWICK
610055 10390 2101 ADAPTER CABLE-CHADWICK
610056 TK1812-3 922 2100 BOX HEAD (B100 PROPELLER BOLTS)
610057 SBH - 9/16 2099 BOX HEAD
610058 SBH - 7/8 2098 BOX HEAD
610059 LTC-3 2097 TORQUE HANDLE(BEFORE AD 83-08-01)
610060 B-842 2096 PROP PISTON NUT WRENCH
610061 B5588 1195 WRENCH ADAPTER, 7/8"
610062 B5109 2104 FEEDBACK RING PULLER (McCauley)
610063 TK1573-918-1 1203 FEEDBACK RING PULLER - 4 BLADE(NOT UE)
610064 TK-1573/D918-5 1201 BETA RETRACTOR TOOL
610065 D5945 1200 FEEDBACK COLLAR RETRACTOR,4 BLADE McCauley
610066 CST-2834-1 1199 FEEDBACK RING PULLER - 4 BLADE (UE SERIES)
610067 TQ50A 1198 PROPELLER WRENCH, 0-600 IN/LBS
610068 PWC30114-16 1196 RETAINING NUT WRENCH, PROP GOV.
610069 96-910002/922 1194 PROP BOLT TORQUE WRENCH ADAPTER
610070 10113 1193 TORQUE ADAPTER PROP BOLTS-5/8" HEAD
610071 8500 SYSTEM 1192 PROPELLER BALANCING EQUIPMENT
610072 222 1191 OSCILLOSCOPE
610073 B5149 2105 SPACER, FEEDBACK RING HOLDER(McCauley)
612251 213618 1189 WOODWARD TYPE II TEST SET
612252 LOCAL MANUFACTURE 1190 SYNCROPHASER BREAKOUT BOX
710001 SPL3652 5133 ADAPTER, TORQUE WRENCH, ALTNTR MOUNTING
710003 25-7Y9A 6161 SLING, ENGINE
710004 25-8Y21-1A 6162 SLING, ENGINE INSTALLATION/REMOVAL
710005 25Y27A 6176 SLING, ENGINE
710006 25-9Y43-1A 5123 SLING, ENG INSTALL/REMOVAL
710007 25-9Y311-1A 6165 STAND, ENGINE LAYBY
710008 A0BA5525 6170 STAND, TRANSPORTATION ENGINE
710009 A0BA6052 6171 STAND, TRANSPORTATION ENGINE
710011 25-9Y101-1A 5121 STAND, ENGINE LAYBY
710013 25YTS345E21-1A 6177 TEST SET, R.V.D.T. THRUST LEVEL
710014 25YTS345E19-1 6206 CABLE- RVDT TEST
710016 08-0102-4000 5119 SLING, ENGINE - USE WITH STAND PT. NO 08-2001-0000
710017 25-8Y269-1A 6164 CRANE, ENGINE
710018 K2112 5129 ADAPTER, ENGINE - USE WITH STAND PT. NO 08-2001-0000
710019 918352-1-1 6169 CABLE, BREAKOUT BOX- USE W/ 51-916718-1-1
710020 51-916718-1-1 6167 BOX, BREAKOUT
710021 298219-3 6166 TEST BOX, J2 CONNECTOR
710022 TMC105A 6173 DRIVE-BIT, 1/4 SQ DRIVE- 1/4" x 0.033" BLADE TIP
710023 212-8 6160 DRIVE-BIT, TORQUE-SET (8-32UNC 1/4AF HEX DRIVE)
710026 212-10 6157 DRIVE-BIT, TORQUE-SET (10-32UNF 1/4AF HEX DRIVE)
710027 212-1/4 6156 DRIVE-BIT, TORQUE-SET (1/4UNF 1/4AF HEX DRIVE)
710028 185-4 6155 DRIVE-BIT, 3/16Hex X 1/4Hex DRIVE
711002 A0BA6452 6172 STAND, THRUST REVERSERS
711003 08-2001-0000 5120 STAND, USE W/ ADAPTER K2112 & SLING 08-0102-4010
711004 TOFBKIT125 6174 ENDOPROBE, BASIC RIGID ENDOPROBE KIT
720001 289816-1 5126 CRANK, HAND - H.P. SPOOL
720006 289801-1B 5124 TOOL, SEAL INSTALLATION, LIP SEAL 3020052-5
720007 289808-1 5125 TOOL, SEAL REMOVAL, LIP SEAL 3020052-21
720051 50-590018 2115 ENGINE SLING
720052 65-590018 2114 OIL DRAIN TUBE
720053 93210091002-605 2116 ENGINE SLING GARRETT
720054 E2 3083 DIFFERENTIAL COMPRESSION TESTER
720055 50-910419-611 2113 SUPERCHARGER INSTALL TOOL(EARLY 90'S)
720056 1004-1 1204 TIT INDICATION SYSTEM TEST UNIT (ALCOR)
720057 50-590158-25 2111 ENGINE RIGGING TEMPLATE
720058 AS REQUIRED 3088 SET OF TORQUE WRENCHES (100, 1500,2500 IN/LBS
720059 AS REQUIRED 3087 0-9 OUTSIDE MICROMETER"
720060 AS REQUIRED 3086 0-1 DEPTH MICROMETER"
720061 AS REQUIRED 3078 CONTINENTAL MOTORS TOOLS FOR CYLINDER REPL.
720062 AS REQUIRED 3073 ENGINE STAND - CONTINENTAL ENGINES/EQUIV.
720063 AS REQUIRED 3072 ENGINE STAND - LYCOMING ENGINES OR/EQUIV.
720064 AS REQUIRED 3071 SPARK PLUG CLEANING & GAPPING EQUIPMENT
720065 AS REQUIRED 3075 VALVE SPRING COMPRESSOR
720066 AS REQUIRED 3076 1 TO 6" MICROMETER SET (OUTSIDE)"
720067 81-111 3085 DIAL INDICATOR
720068 AS REQUIRED 3077 1 TO 6" MICROMETER SET (INSIDE)"
720069 E25 AND E50 3084 TIMING DISCS & LIGHTS
720070 AS REQUIRED 2117 HOT OIL TANK CONTAINING OIL CPW202
720071 AS REQUIRED 3079 LYCOMING TOOLS FOR CYLINDER REPLACEMENT
720072 AS REQUIRED 3080 DIAL INDICATOR
720073 AS REQUIRED 3081 HELICOIL KIT AND TOOLS
720074 BC-18 3082 TIME-RITE
720075 AS REQUIRED 3074 VERTICAL ARBOR PRESS
720076 AS REQUIRED 3070 ENGINE CLEANING EQUIPMENT
720077 PORT-A-TEST UNIT 1213 2 CALIBRATED LARGE DIAL PRESSURE GAGES(0-30 PSI)
720078 K-1152 1222 ENGINE COMPRESSOR WASH ADAPTER
720079 08-4049-1010 1221 ENGINE COMPRESSOR WASHER, USE WITH K-1152 ADP.
720080 K-2117 1220 ADAPTER (JT15D), USE WITH 08-2001-0000 STAND
720081 K-2116 1219 ADAPTER (PT6A-41 - PT6A-65), USE WITH 08-2001-0000
720082 50-000065-TC935 2110 THERMOCOUPLE HARNESS - IAT
720083 08-2001-0000 1217 ENGINE STAND (PT6/JT15D), USE WITH K-2116/2117/211
720084 50-590158-5 2112 FEELER GAGE
720085 101-000000/934 1223 TORQUE SYSTEM PRESSURE TESTER
720086 08-0100-4000 1214 ENGINE SLING (PT6A - PT6A-28)
720087 K-2115 1218 ADAPTER (PT6A - PT6A-28), USE WITH 08-2001-0000 ST
720088 D-4390 1212 VU-THRU TACHOMETER
720089 AS REQUIRED 1211 TEST GAUGE - OIL PRESSURE/FUEL PRES.(0-150 PSI)
720090 AS REQUIRED 1210 SURFACE PLATE
720091 5230 1209 OIL FILTER CUTTING TOOL
720092 5209 1208 PROP SHAFT OIL SEAL INSTALLER -CONTINENTAL
720093 445 1207 18 MM SPARK PLUG TAP - CONTINENTAL
720094 11-8950-1 OR -2 1206 IGNITION HARNESS TEST EQUIPMENT
720095 10A4555S AVGAS 1205 FLOWRATER, 20-200 PPH, AVGAS (REF: S/N8010A0292A1)
720096 08-0102-4000 1215 ENGINE SLING (PT6A-41 - PT6A-65)
720097 01-357-00 2107 ENGINE DATA SIMULATOR
720098 41 2109 FILTER
720099 08-0114-4010 1216 ENGINE SLING
720100 276084-1-1 2108 TURBOCHARGER CONTROL TESTER
720101 101-930023-5 1224 OIL DRAIN TUBE
720102 AS REQUIRED 2106 BOROSCOPE (OPTIONAL)
720103 BH112JD-101 1229 JET CAL AND ASSOCIATED HARNESSES
720104 3117310000 PRONTO PLUS 1228 DIGITAL THERMOMETER
720105 114-930022-1 1225 OIL DRAIN TUBE
720106 10A4555S JETA 1226 FLOWRATOR METER (80-800 LBS)SPEC GRAV 0.77/80-800
720107 2312-G 1227 TURBINE TEMPERATURE INDICATING SYS TESTER (BARFIELD)
720108 TK2091/917 1247 EXTENSION, STARTER- GENERATOR REMOVAL
720109 TK2091/922 1248 WRENCH, STARTER- GENERATOR REMOVAL
720110 TK2240/939 1249 ENGINE BLEED AIR BLANKING PLATE
720111 08-0119-0800 1250 ENGINE SLING
720112 08-2021-0000 1251 ENGINE STAND
720113 K-2032 1252 ADAPTERS, ENGINE STAND
720114 TL37321 9701 GUAGE, IGNITOR 4 POLE
720115 COMPUTER, LAPTOP 9702 LAP TOP COMPUTER
720116 TL37102-102 9703 TOOL, SHAFT STRETCH
720117 TL37330 9704 SOCKET, FUEL NOZZLE ADAPTER
720118 TL37220 9705 ADAPTER, TORQUE
720119 TL37244 9706 ENGINE ROTATION TOOL
720120 TL37255 9707 FITTING, OIL DRAIN
720121 TL37253 9708 MOUNT, ENGINE VIBRATION
720122 TL37270 9709 TORQUE ADAPTER GEAR BOX BREATHER VENT TUBE
720123 TL99500 9710 WRENCH, LP SHAFT FORWARD NUT
720124 TL99501 9711 PULLER ASSY., SPINNER PILOT PLATE
720125 TL99502 9712 PULLER ASSY., FAN
720126 TL39454 9713 TORQUE ADAPTER, FUEL DELTA P SWITCH
720127 TL65047 9714 PULLER, DRAIN TUBE
730001 25-7Y63A 5134 PIN, RIGGING, ENGINE FUEL CONTROL
730002 25-7Y65A 5135 ADAPTER, RIGGING, ENGINE THROTTLE LEVER
730051 AS REQUIRED 2118 FUEL TEST STAND W/ FLOW METER
732001 PE28707 6191 SPANNER, IGNITER PLUG
732002 909932-3-1 6168 TEST SET, ENGINE (TFE731-3)
732003 909932-5-1 5128 TEST SET, ENGINE (TFE731-5)
732004 PP322-1 6202 POTENTIOMETER, D.C.
732005 PE25368 6189 BLEED TOOL, FUEL PUMP/L.P.FILTER
732006 HDV2A 6178 METER, MILLIVOLTS
732007 25-6YTS299E1A 6175 CABLE, TEST
732008 PE4484 6194 PIPE, GEARBOX PRIMING
732009 PE17433 6185 ADJUSTER, PRESSURE (P1) TO BLOW OFF VAL.
732010 PE18599 6186 SPANNER, ACCESSORY GEARBOX NUTS
732011 PE18600 6187 ADAPTER, MICRO PUMPS PRIMING
732012 PE22712 6188 DRAIN TOOL, OIL TANK
732013 PE2621 6190 RATCHET, USED WITH PE2617 OR PE28707
732014 PE3424 6192 TOOL, ELECT.PLUG ADAPTERS (SIZE A)
732015 PE4483 6193 SYRINGE, GEARBOX PRIMING
732016 T2BJ1326SN 6204 SOCKET, EXHAUST CONE REMOVAL
732017 PE4485 6195 ADAPTER, GEARBOX PRIMING
732018 PE8653 6200 SOCKET, EXHAUST CONE REMOVAL
732019 PE7483 6198 TOOL, ELECT.PLUG ADAPTERS (SIZE Z)
732020 PE17432 6184 TOOL, TABBING GENERAL APPLICATION
732021 PE8709 6201 SPANNER, DRAIN VALVE RETAINING NUT
732022 PE4797 6196 SPANNER, IDLE SPEED ADJUSTER
732023 PE7390 6197 SPANNER, OIL TANK CONNECTION
732024 T2BJ1040SN 6203 SOCKET, EXHAUST CONE REMOVAL
732025 PE7493 6199 BLADE, EXHAUST CONE REMOVAL
732026 T2EC3022SN 6205 EXTENSION, EXHAUST CONE REMOVAL
732027 PE17207 6183 ADAPTER, OIL PRESSURE FILTER PRIMING
732029 PE11026 6179 BLEED PIPE, RATE RESET VALVE
732030 PE15841 6180 SPANNER, FUEL PUMP MOUNTING NUTS
732031 PE16117 6181 EXTRACTOR, BLOW OFF VALVE SLEEVE
732032 PE1617 6182 SPANNER, OIL TANK RELIEF VALVE
760051 CPWA-32350A 2120 ENGINE INLET PROTECTIVE COVER
760052 35-590009 2119 THROTTLE RETAINING NUT WRENCH
760053 WT-107901 2121 MAX N1 SHIM TOOL
770051 CL23 2122 CALIBRATOR/THERMOMETER
770052 101-380091-1/935 1253 CALIBRATION ADAPTER TEST BOX (MEGGITT)
770053 130-380042-1/935 1255 CALIBRATION ADAPTER TEST BOX- MEGGITT
770054 90-380034-1/935 1256 CALITRATION ADAPTER TEST BOX- MEGGITT
772001 46673 5127 TOOL, CRIMP (ITT FLYING LEADS)
780001 RSE1192 5130 TOOL, STRAIGHT EDGE - RIGGING THRUST REVERSER
780002 RSE1211 5131 PIN, T/R GROUND LOCKOUT CONTROL VALVE
780003 RSE1218 5132 ADAPTER, THRUST REVERSER LATCH TEST
783001 25-9Y119-1A 5122 STAND, THRUST REVERSER
783002 25-8Y261-1A 6163 SLING, DEE HOWARD THRUST REVERSER
INDEX BY TOOL PART NUMBER
toolnumber ata reference nomenclature
.TOOL PICTURE CATALOG. 000000 0 PHOTOS AND SKETCHES OF REQUIRED TOOLS (Not a Tool- Referance page)
01-0314-02 240061 1048 UNIVERSAL BREAKOUT BOX AND CABLES(RK2 & AFTER)
01-0543-0000 090054 4001 TOW BAR HEAD, DIAMOND/BEECHJET
01-1109-0000 090058 1016 TRACTOR TOW BAR
01-1179-0000 090056 2016 TOW BAR, PORTABLE(BEECHJET)
01-1202-0000 090053 4002 MULTI HEAD TOW BAR
01-1286-0000 071028 2125 PORTABLE TOWBAR
012-14830 210068 1033 THERMISTOR VACUUM GAGE (MEASURES IN MICRONS) R12
01-357-00 720097 2107 ENGINE DATA SIMULATOR
02-0522-0140 070062 1001 JACKS (3 REQUIRED FOR MODEL 60)
02-0530-0110 070069 1002 JACK
02-0532-0110 070068 1003 JACK (KA 200 W/HIGH FLOTATION GEAR, STARSHIP NLG)
02-0536-0110 070071 1004 HYDRAULIC AIRCRAFT JACK
02-0544-0110 070072 1005 JACK
0208KAQ01 284002 5058 CABLE KIT, USE WITH 0602KQC03
0216KAQ01 284003 5059 CABLE KIT, USE WITH 0602KQC03
02-7853-0100 071027 2124 MAIN GEAR HYDRAULIC JACK
03-4006-0000 070073 1006 JACKING STABILIZATION TAIL STAND
045A-99142-001 320051 1104 PIN PULLER
045A-99144-001 270050 1060 RIG PIN SET
045A-99225-01 070074 1008 JACK PAD KIT
045A-99226-001 271057 1061 PROTRACTOR ASSY
045A-99228-001 271056 1062 PROTRACTOR ASSY
04-6012-1100 200079 1022 WORK STAND - B5 TYPE
04-6014-0010 243001 6061 HOIST, BATTERY - REMOVAL / INSTALLATION
04-6150-5000 120055 1017 CRANE - BOOM HEIGHT AT LEAST 12 FT.
04-6150-5000 121019 6021 CRANE, UTILITY - REMOVAL OF HEAVY UNITS
05-3005-1100 290006 6088 TEST RIG, HYDRAULIC SYSTEM - 6GPM FLOW RATE (17% LESS FOR 50Hz MAINS)
05-7015-1100 290051 1099 HYDRAULIC POWER UNIT
05-7022-1100 290011 6089 TEST RIG, HYDRAULIC SYSTEM - 15GPM FLOW RATE (17% LESS FOR 50Hz MAINS)
06 7852 01 200052 2036 CONTACT CRIMPER
0602KQC03 284001 5060 TEST SET, FUEL INDICATING SYSTEM
06-4005-0501 320083 1105 HYDRAULIC HAND PUMP (0-3000 PSI)
06-5022-6500 121018 5017 UNIT, HYDRAULIC & ENGINE OIL SERVICE
07-3005-6900 280065 1240 FUEL SAMPLEUNIT W/.125 HEX ADAPTER
08-0100-4000 720086 1214 ENGINE SLING (PT6A - PT6A-28)
08-0102-4000 710016 5119 SLING, ENGINE - USE WITH STAND PT. NO 08-2001-0000
08-0102-4000 720096 1215 ENGINE SLING (PT6A-41 - PT6A-65)
08-0114-4010 720099 1216 ENGINE SLING
08-0119-0800 720111 1250 ENGINE SLING
0801KQC02 284004 5061 CABLE KIT, USE WITH 0602KQC03
08-2001-0000 711003 5120 STAND, USE W/ ADAPTER K2112 & SLING 08-0102-4010
08-2001-0000 720083 1217 ENGINE STAND (PT6/JT15D), USE WITH K-2116/2117/211
08-2021-0000 720112 1251 ENGINE STAND
08-4049-1010 720079 1221 ENGINE COMPRESSOR WASHER, USE WITH K-1152 ADP.
0W1822 121024 6026 SPANNER, 9/16 X 11/16 WHITWORTH OPEN
1004-1 720056 1204 TIT INDICATION SYSTEM TEST UNIT (ALCOR)
101-000000/934 720085 1223 TORQUE SYSTEM PRESSURE TESTER
101-00477A 284060 1089 FUEL QUANTITY TEST CABLE - WING TANK
101-00477B 284052 1090 FUEL QUANTITY TEST CABLE -FUSELAGE TANK
101-00489 284058 1091 FUEL QUANTITY TEST CABLE - BRANSON TANK
101-00814 284056 1092 FUEL PROBE ADAPTER
101-380091-1/935 770052 1253 CALIBRATION ADAPTER TEST BOX (MEGGITT)
101-524887/934 300057 2057 TEST FIXTURE ELEC CLUTCH (LOCAL MANUFACTURE)
101-524887/935 300056 2058 TEST TOOL ELEC CLUTCH (LOCAL MANUFACTURE)
101-590016-7 100054 2021 GUST LOCK CONTROL
101-590020-1 280051 2060 FUEL SUMP DRAIN WRENCH
101-590052-1 520051 1130 CARGO DOOR LATCH WRENCH(CARGO DOOR AND 1900)
101-590053-1 520052 2087 CARGO DOOR CLOSING AID (CARGO DOOR ONLY)
101-930023-5 720101 1224 OIL DRAIN TUBE
10-4036-0010 121004 6030 UNIT, TOILET SERVICING
105-10 200055 3012 HUCK BOLT SPLITTER
105-590013-1 090059 2017 MODEL 76 TOW BAR
10996 PIN 570080 1186 ALIGNMENT PIN LOWER FORWARD WING(3 ELEMENT)
10A4555S AVGAS 720095 1205 FLOWRATER, 20-200 PPH, AVGAS (REF: S/N8010A0292A1)
10A4555S JETA 720106 1226 FLOWRATOR METER (80-800 LBS)SPEC GRAV 0.77/80-800
114-380045/935 320068 2076 POWER STEERING BREAKOUT BOX (DECOTO, UC-UE)
114-380045/935-1 320065 2077 POWER STEERING BREAKOUT BOX (DECOTO, UC-UE)
114-389001/935 284059 1093 FUEL QUANTITY PROBE BREAKOUT TEST(UA/UB)
114-590023-1 100058 2022 CONDENSER INLET COVER
114-590024-7 100063 2023 LH PITOT COVER
114-590024-8 100062 2024 RH PITOT COVER
114-590025-1 080053 1012 PLUMB BOB SUPPORT
114-590028-9 100061 2025 PROP SLING/EXH. COVER
114-590029-1 100060 2026 ENG. AIR INLET COVER
114-590038-1 100059 2027 MLG DOWNLOCK
114-590038-3 100051 2028 NLG DOWNLOCK
114-810055-939 320082 1106 WHEEL DRIVE CLIP (1900 SERIES)
114-820000-939 320067 2079 CENTERING TOOL - NOSE GEAR STEER(DECOTA)
114-930022-1 720105 1225 OIL DRAIN TUBE
115-590023-1 320055 2063 MAIN STRUT EXTENSION LIMITER
115-590035 320058 2064 NOSE LANDING GEAR SHOCK STRUT LIMITER
117-590011-1 070057 2001 AIRPLANE HOISTING SLING, 350 MODEL
118-389004/935 284055 1094 FUEL QUANTITY PROBE BREAKOUT TEST(UC/UE)
11-8950-1 OR -2 720094 1206 IGNITION HARNESS TEST EQUIPMENT
1211-8W 210060 1041 WATER MANOMETER (FOR A/C USE)
122-040149/935 273153 1063 STALL WARNING BREAKOUT BOX
122-062009-35 270051 2059 SPANNER WRENCH (FWD WING)
122-100072-7 070067 1009 JACK ADAPTER (3)
122-130000-3/D810-3 271055 1064 ELEVON TRAVEL BOARD
122-130000-4/D810-4 271054 1065 ELEVON TRAVEL BOARD
1222-36M 210055 2048 MERCURY MANOMETER (TEST BENCH USE)
122-381014/935 275051 1066 FLAP ACT TEST BOX
122-410700-25 271053 1067 FWD WING RIG PIN
122-590011-17 277051 2056 CONTROL LOCK
122-590011-21 100055 2029 GUST LOCK ASSY
122-590014-1 080056 1011 TIE DOWN RING
122-590014-1 100053 2030 TIE DOWN RING (2)
122-590015-1 120056 2033 FUEL SUMP DRAIN
122-590016-19 100052 2031 ENGINE INLET COVER
122-590016-3 100057 2032 PROP SLING
122-590017-3 320084 1119 NOSE GEAR DOOR LOCKPIN
122-610000-1/D810 275052 1068 FLAP TRAVEL BOARD
122-610000-2/D810 273055 1069 FLAP TRAVEL BOARD
122-610000-5/D810 273054 1070 ELEVATOR TRAVEL BOARD
122-610000-6/D810 273053 1071 ELEVATOR TRAVEL BOARD
122-620000-1/K41498 273052 1072 FORWARD WING TRAVEL BOARD
122-620000-2/K41499 273051 1073 FORWARD WING TRAVEL BOARD
122-620010/934-1 570075 2089 FREE PLAY TESTER
122-630000-3/D810-1 272051 1074 RUDDER L/H TRAVEL BOARD
122-630000-4/D810-2 272052 1075 RUDDER R/H TRAVEL BOARD
122-810001/935-1 320064 1122 MAIN GEAR TEST BOX
122-810001/935-1 320081 1107 MAIN GEAR TEST BOX (MM 32-60-00)
122-820000/935-2 320076 1108 NOSE GEAR TEST BOX (MM 32-60-00)
122-820000/935-2 320078 1121 NOSE GEAR TEST BOX
12350-032 200054 3013 HARVARD TRIP BALANCE, DOUBLE BEAM, OHAUS
125REF000000026 320001 6098 MACHINE, AUTOMATIC WHEEL CRACK DETECTOR
128-11218/935 310051 1103 TAIL DE-ICE TEST SET
129-000000/939 210056 2052 SAFETY NET, FUSELAGE(1900D)
129-000000/939-1 210062 1039 SAFETY NET, CABIN DOOR(1900D)
130-380042-1/935 770053 1255 CALIBRATION ADAPTER TEST BOX- MEGGITT
13060A 260052 1059 SQUIB TESTER (HTL)
132-120022-3 071026 1233 JACK PAD, MAIN LANDING GEAR
14-4039-0000 320088 3059 TIRE BEAD BREAKER (MANUAL) & SAFETY CAGE
14798 KIT 200074 1027 FLUORESCENT PENETRANT INSPECTION KIT
1500P 121028 6031 DRIVER, 1/4 HEX., TORQUE- SET DRIVE BITS
1550P 121029 6032 DRIVER, 5/16 HEX (FOR TRIWING BITS)
15-7600-1000 210001 6058 UNIT, CABIN PRESSURIZATION
15-7602-1000 210064 1037 GROUND PRESSURIZATION BLOWER,200CFM @ 12 PSI MIN.
169-590010-3 090051 2018 MODEL 23 TOW BAR
169-590014 070063 2015 JACK PADS (except 24R)
169-810000-601, -602 CODE 703 200053 3014 LINE REAMER
169-810031 CODE 917 320054 2065 MAIN GEAR SHOCK DISC COMPRESSOR KIT
1751DIN 570063 1188 TORQUE WRENCH 1/4 DRIVE,0-75 IN/LBS(3 ELEMENT)
17600B 210065 1036 AIR COND. SERVICING EQUIP.-CHARGING /W VACUUM(R134)
17TES0200 230055 2130 CVR AUDIO MONITOR ADAPTER
1811-F-D 340054 3062 PITOT STATIC TEST SET
185-1 710030 6153 DRIVE-BIT, 3/32Hex X 1/4Hex DRIVE
1952-1-3-5 273151 1076 STALL WARNING FORCE APPLICATOR
19B99500 238051 1047 MAINTENANCE TERMINAL SOFTWARE(NOISE SUPPR.)
1E30-2 210051 1042 FLOW CONTROL VALVE TEST BOX
20127-2 231001 5023 EXTRACTOR, H.F.WIRE AERIALS
212-1/4 121030 6033 DRIVER, TORQ-SET,1/4UNF X 1/4HEX DRIVE
212-1/4 710027 6156 DRIVE-BIT, TORQUE-SET (1/4UNF 1/4AF HEX DRIVE)
212-10 710026 6157 DRIVE-BIT, TORQUE-SET (10-32UNF 1/4AF HEX DRIVE)
212-4 710025 6158 DRIVE-BIT, TORQUE-SET (4-40UNC 1/4AF HEX DRIVE)
21Y2577A 261002 5035 ADAPTER, TORQUE LOADING - FIREWIRE COUP
21Y723B 101042 6011 COVER, ICE DETECTOR
2312-G 720107 1227 TURBINE TEMPERATURE INDICATING SYS TESTER (BARFIELD)
242BTE 284007 6077 CABLE, FOR USE WITH QAA
2548H 284054 1095 FUEL QUANTITY TEST EQUIPMENT -CONSOLIDATED
25-6Y1647AB 091001 6004 TOWBAR, (MOD. 253010B)
25-6Y1659 091009 6005 SHEAR-PIN, TURN (4 SUPPLIED WITH TOWBAR)
25-6Y1661 091010 6006 SHEAR-PIN, PUSH/PULL (4 SUP. WITH TOWBAR)
25-6Y1665A 271004 5039 PLATE, AILERON RIGGING
25-6Y1729AB 271001 5040 GAUGE, AILERON GEARED TAB
25-6YTS299E1A 732007 6175 CABLE, TEST
25-7Y15A 270003 5041 PIN SET, RIGGING PIN SET
25-7Y19AB 120005 6034 KIT, GENERAL TOOL
25-7Y63A 730001 5134 PIN, RIGGING, ENGINE FUEL CONTROL
25-7Y65A 730002 5135 ADAPTER, RIGGING, ENGINE THROTTLE LEVER
25-7Y9A 710003 6161 SLING, ENGINE
25-8Y103-1A 120001 6035 BRUSH, WINDSCREEN STATIC DISCHARGE
25-8Y109-1A 271002 5042 EXTRACTOR, AILERON OUTER HINGE BOLTS
25-8Y11-1A 274002 5043 BOARD, INCIDENCE - HORIZONTAL STAB.
25-8Y121-1A 273001 5044 PROTRACTOR, STALL VANE
25-8Y15-1A 510002 6143 BOARD, HORIZONTAL STABILIZER DIHEDRAL
25-8Y153-1A 071023 6001 SLING, WING
25-8Y191-1A 275005 6074 GAUGE, ASSEMBLY - FLAP RIGGING
25-8Y195-1A 570001 6150 EXTRACTOR, WING/FUSELAGE DRAG SPIGOT
25-8Y197-1A 570002 6151 SPACER, SET -WING/FUSELAGE DRAG SPIGOT
25-8Y211-1A 101054 6012 COVER, COLD AIR UNIT EXHAUST
25-8Y21-1A 710004 6162 SLING, ENGINE INSTALLATION/REMOVAL
25-8Y215-1A 490003 5115 STAND, A.P.U. (TURBOMACH)
25-8Y261-1A 783002 6163 SLING, DEE HOWARD THRUST REVERSER
25-8Y269-1A 710017 6164 CRANE, ENGINE
25-8Y309-1A 490001 5116 HOIST, A.P.U. (TURBOMACH)
25-8Y35-1A 271005 5045 PLATE, AILERON RIGGING
25-8Y47A 101052 5014 PLUG, STATIC VENT
25-8Y59-1A 270004 5046 SET, RIGGING PIN
25-8Y77-1A 091005 6007 ARM, STEERING (COLLAPSIBLE)
25-8Y91-1A 272004 5047 GAUGE, RUDDER MOVEMENT (REPLACES 25Y75A/B)
25-8Y97-1A 272002 5048 GAUGE, RUDDER TRIM AND GEARED TAB (REPLACES 25Y1093)
25-9Y101-1A 710011 5121 STAND, ENGINE LAYBY
25-9Y111-1A 071021 6002 SLING, TAILPLANE
25-9Y11-1A 321013 6099 SPANNER, RING NUT
25-9Y113-1A 270006 6075 PIN SET, RIGGING PIN SET
25-9Y115-1A 282006 6078 EQUIPMENT, HANDLING - VENTRAL TANKS
25-9Y119-1A 783001 5122 STAND, THRUST REVERSER
25-9Y123-1A 120006 6036 KIT, TOOL SERVICING
25-9Y13-1A 324026 5071 SPANNER, MAIN GEAR AXLE RETAINING NUT
25-9Y15-1A 321007 5072 SPANNER, GLAND SEAL
25-9Y17-1A 321016 6100 SPANNER, RING NUT OIL HEAD
25-9Y215-1A 122012 6079 TOOL, FUEL SAMPLING (SEE 25-9Y385-1A)
25-9Y217-1A 071019 6003 SLING, FUSELAGE
25-9Y27-1A 322003 5073 ADAPTER, OIL CHARGING MLG/NLG
25-9Y277-1A 270005 5049 PIN SET, RIGGING PIN SET
25-9Y301-1A 273005 5050 PLATE, ELEV. RIGGING-USE W/25-8Y11-1A
25-9Y311-1A 710007 6165 STAND, ENGINE LAYBY
25-9Y31-1A 091003 5013 TOWBAR
25-9Y385-1A 280001 5062 TOOL, FUEL SAMPLING (REPLACES 25Y1125AB OR 25-9Y215-1A)
25-9Y41-1A 091011 6008 PIN, SHEAR-PIN (4 SUPPLIED WITH TOWBAR)
25-9Y43-1A 710006 5123 SLING, ENG INSTALL/REMOVAL
25-9Y7-1 321010 5074 SPANNER, ORIFICE HEAD
25-9Y79-1A 273002 6152 JIG, SETTING - L.E. STALL TRIGGER
25-9Y85-1A 273003 5051 CLIP, ELEVATOR COMPENSATOR
25-9Y87-1A 321018 6101 FIXTURE, HOLDING - MAIN U/C LEG
25-9Y9-1A 321011 6102 SPANNER, FLUTTER GUIDE PLATE
25Y1121AB 120031 6037 TOOLS, WING/STAB RETAINING RINGS
25Y1185A 101001 6013 PLUG, WING STATIC SENSOR (STALL VENT)
25Y1223 291001 5066 ADAPTER, TORQUE LOADING
25Y1319A 322009 6103 FIXTURE, NOSE OLEO HOLDING
25Y1323 322005 6104 PIN, NOSE LEG OLEO ALIGNMENT
25Y1363A 322004 6105 EXTRACTOR, LOCATOR NLG
25Y13A 071009 5001 PAD, TAIL JACKING
25Y1491-31A 321002 5075 CLAMP, MAIN LANDING GEAR DOOR JACK
25Y1525 231002 5024 KEY, GRANGER STATIC DISCHARGER
25Y1553A 521002 6146 DRUM, TORQUE LOADING - ENTRY DOOR TENSATOR
25Y1555A 521001 5117 KEY, WINDING - CABIN DOOR
25Y1817A 324002 5076 TOOL, COMPRESSION, PARKING BRAKE SPRING STRUT
25Y1821-1A 120002 5018 TOOL KIT, SERVICING TOOL KIT
25Y1821-5A 120002 6038 TOOL KIT, SERVICING TOOL KIT
25Y1883-1A 321003 5077 SPANNER, SIDE STAY RETAINING NUT (REPLACES 25Y259A)
25Y1889-1 122009 6039 DRIVER, HI-TORQUE-USE W/ DHS1421-D BOLTS
25Y189A 121007 5019 SPANNER, DE-ICING TANK CAPS
25Y195A 274001 5052 BOARD, HORIZONTAL STABILIZER
25Y197A 101051 5015 PIN, MAIN U/C LOCKING
25Y199AB 101041 6014 COVER, NOSE WHEEL
25Y19A 510003 6144 BOARD, WING DIHEDRAL
25Y21A 082001 5010 BAR, TRANSVERSE LEVELLING
25Y235A 322006 6106 SPANNER, ORIFICE PLATE - NOSE LEG
25Y237A 322001 5078 SPANNER, NOSE GEAR GLAND NUT
25Y239A 322002 5079 SPANNER, NOSE GEAR AXLE RETAINING NUT
25Y23A 082002 5011 BAR, FORE AND AFT LEVELLING
25Y241A 322007 6107 SPANNER, RET. NUT PRESSURE NLG
25Y249AB 324025 5080 SPANNER, MAIN GEAR AXLE RETAINING NUT
25Y257A 324027 5081 SPANNER, MAXARET RETAINING NUT
25Y261A 321005 5082 SPANNER, SIDE STAY LOCATING PIN
25Y27A 710005 6176 SLING, ENGINE
25Y283AB 271003 5053 PLATE, AILERON RIGGING
25Y331A 071011 5002 BOARD, PROFILE, LEFT WING (REQUIRES TRESTLE MET4210)
25Y332A 071012 5003 BOARD, PROFILE, RIGHT WING (REQUIRES TRESTLE MET4210)
25Y33A 101050 5016 PIN, NOSE U/C LOCKING
25Y41AB 101040 6015 COVER, MAINWHEEL
25Y493AB 270002 5054 SET, RIGGING PIN
25Y535A 071013 5004 BOARD, PROFILE, FORWARD FUSELAGE (REQUIRES TRESTLE MET4210)
25Y587A 510001 6145 BOARD, HORIZONTAL STABILIZER DIHEDRAL
25Y613AB 321006 5083 SPANNER, MAIN GEAR GLAND NUT
25Y635AB 121008 5020 ADAPTER, FUEL DRAIN
25Y67A 071010 5005 PAD, WING JACKING
25Y725A 324028 5084 SPANNER, MAIN WHEEL NUT
25Y73A 273004 5055 PLATE, ELEV. RIGGING-USED W/ 25-8Y11-1A or 25Y195A
25Y759A 321008 5085 ADAPTER, OLEO OIL CHARGING
25Y829A 275001 6076 BOARD, WING INCIDENCE
25Y831A 275004 5056 PLATE, FLAP RIGGING
25Y867A 282007 6080 ADAPTER, FUEL TANK DRAIN
25YTS129R21A 341003 5107 ADAPTER, STATIC VENT PLUG
25YTS129R23A 341004 5108 BLANK, STATIC VENT
25YTS303R17A 282002 5063 ADAPTER, FUEL FLOW TEST-USE W/25YTS303R1A
25YTS303R1A 282001 5064 ADAPTER, FUEL FLOW TEST
25YTS31E5A 304001 6095 TESTSET, WINDSCREEN GOLD FILM
25Y-TS340E1A 341008 5106 TEST SET, STALL IDENT MAINTENANCE CHECK
25YTS345E19-1 710014 6206 CABLE- RVDT TEST
25YTS345E21-1A 710013 6177 TEST SET, R.V.D.T. THRUST LEVEL
2-753A060 101006 6010 COVER, PRESSURE HEAD
276084-1-1 720100 2108 TURBOCHARGER CONTROL TESTER
289801-1B 720006 5124 TOOL, SEAL INSTALLATION, LIP SEAL 3020052-5
289808-1 720007 5125 TOOL, SEAL REMOVAL, LIP SEAL 3020052-21
289816-1 720001 5126 CRANK, HAND - H.P. SPOOL
298219-3 710021 6166 TEST BOX, J2 CONNECTOR
300 070052 2003 JACK, 3 POINT
3000 PSI GUAGE 320090 1243 LARGE DIAL PRESSURE GAGES 0-3000 PSI +/- 1/2%
3117310000 PRONTO PLUS 720104 1228 DIGITAL THERMOMETER
35-588 S 570074 1158 WING HINGE PIN INSTALLATION TUBING
35-590006 070053 2004 MAIN WHEEL AXLE JACK ADAPTER
35-590009 760052 2119 THROTTLE RETAINING NUT WRENCH
35-590021 070075 1010 TAIL SUPPORT ASSEMBLY W/WEIGHT
35-590064-1 & 35-590067 070054 2005 AIRPLANE HOISTING SLING ASSY AND FITTINGS
35-590076 552054 1144 SHAFT ASSEMBLY - DIFFERENTIAL MECHANISM
35-590087-1 550071 1143 JIG ASSEMBLY - DIFFERENTIAL MECHANISM
36D2844 270056 3054 BUBBLE PROTRACTOR
390-000011/917-29 284061 1241 FUEL CALIBRATION HARNESS
390-100001/917-12 284062 1242 FUEL PROBE SELECTOR
390-524001-0001/917 271061 1239 RIG PIN SET
390-524063-0001 100064 1234 GUST LOCK, CONTROL
400 w/ 60-590013 & 60-590013-1 070055 2006 JACK (DUKE ONLY)
41 720098 2109 FILTER
4328A 230051 3050 MILLIOHM METER (CAPABLE OF 3 MILLIOHM)
4460102-2 350051 1127 TOOL, O-RING REPLACEMENT (O2 SHUTOFF VALVE)
45-590074-7 320080 1109 LANDING GEAR TENSION GAGE ASSEMBLY
45-590075 090057 1014 TRACTOR TOW BAR 33, 35, 55 & 95
45A01776/935 260053 1058 ENGINE FIRE EXT/DET SYS TESTER
45A91715-1 090055 1015 TOW BAR(BEECHJET & PREMIER)
45A99147-1 071029 2126 JACK PAD, SINGLE MAIN GEAR
45A99201-1 070056 2007 AIRPLANE HOIST
45A99475-1 070066 2008 WING HOIST
45A99515-1 070058 2009 H. STAB. HOIST
50-000065-TC935 720082 2110 THERMOCOUPLE HARNESS - IAT
50-590013-1 570058 1172 WING BOLT NUT TORQUE ADAPTER
50-590014 570085 1185 WING BOLT WRENCH 1 1/16" EXT. WRENCH
50-590018 720051 2115 ENGINE SLING
50-590019 320052 2067 BRAKE CYLINDER SPANNER WRENCH
50-590078 320074 2080 LANDING GEAR CLUTCH WRENCH(MECH GEAR SYS)
50-590106 120058 1018 WRENCH - SUMP DRAIN
50-590148 070050 2010 3 CABLE SLING(90/A90/B90)
50-590158-25 720057 2111 ENGINE RIGGING TEMPLATE
50-590158-5 720084 2112 FEELER GAGE
50-590180-1 100056 2020 TAIL STAND ASSY.
50-910419-611 720055 2113 SUPERCHARGER INSTALL TOOL(EARLY 90'S)
51-916718-1-1 710020 6167 BOX, BREAKOUT
581-901 330052 2081 BULB REPLACE TOOL, INDICATOR
6024A 240010 6062 UNIT, POWER SUPPLY - 0- 60 VOLTS, 0-10 AMPS
60-590014 090060 2019 TOW BAR - MODEL 60
60-960000/D922 610053 2103 PROP BOLT TORQUE ADAPTER WRENCH
6200-3/16 BH-BNC (&-1/4) 200077 1024 EDDY CURRENT TEST PROBES
6209B 200094 3015 H.P. POWER SUPPLY
6240-99-9951230 262002 5036 FILAMENT, SPARE FILAMENT FOR TS2E-13A
65-590018 720052 2114 OIL DRAIN TUBE
74-451-74 300052 1102 BFG RUBBER HAND ROLLER
772BMK2 121011 5086 SET, INFLATION ADAPTER-LESS GAUGES
772D33858S 121010 6140 ADAPTER, OXYGEN CHARGING, 3/8UNF-1/4BSP
8060A FLUKE 200096 3016 OHMMETER
807 101-610000-1/-2 552053 1133 ELEVATOR & ELEVATOR TRIM TAB (F90/200/B300/1900)*
807 101-630000-1 554051 1145 RUDDER & RUDDER TAB TRAVEL GAUGE (F90/200/300/350)
807 114-630000-1 554058 1153 RUDDER TRAVEL GAUGE (1900'S,UA-UC)
807 60-610000 RH & LH 552060 1132 ELEVATOR & ELEVATOR TAB TRAVEL GAUGE (MODEL 60) *
807 60-630001 554052 1146 RUDDER & RUDDER TAB TRAVEL GAUGE (MODEL 60) *
810 115-590033 552051 1141 ELEVATOR TRAVEL GAUGE (MODEL 99/100) *
810 115-590039 554061 1156 RUDDER TRAVEL GAUGE (MODEL 99/100)
810 130-610000 552058 1137 ELEVATOR TAB TRAVEL GAUGE (MODEL 350)
810 130-630000-1 554054 1149 RUDDER TAB TRAVEL GAUGE (MODEL 350/1900 UE)
810 33-524000 554059 1154 RUDDER TRAVEL GAUGE (33/36) *
810 35-660043-2 552061 1142 ELEVATOR TRIM TAB GAUGE (MODEL 33/35/36) *
810 50-590091 576060 1159 AILERON TRAVEL GAUGE (MODEL 33/35/36) *
810 50-590096 552057 1136 ELEVATOR TAB TRAVEL GAUGE (90 SERIES, EXCEPT F90)
810 60-130001 576058 1161 AILERON TRAVEL GAUGE (MODEL 60) *
810 96-524000 554060 1155 RUDDER TRAVEL GAUGE (MODEL 55/58/58P/90, EXCEPT F90)
810 96-630000-1 554055 1150 RUDDER TAB TRAVEL GAUGE (MODEL 55/58/58P)
810 96-630000-207 554056 1151 RUDDER TAB TRAVEL GAUGE (MODEL 90,EXCEPTF90/99/100)
810 99-524000 (LH & RH) 576057 1162 AILERON TRAVEL GAUGE (F90/99/100/200/300/350/1900
810-1 101-130001-1 576053 1167 AILERON TAB TRAVEL GAUGE (MODEL 300/350/1900UA
810-1 114-630000-1 554062 1147 RUDDER TAB TRAVEL GAUGE (MODEL 1900 UA-UB)
810-1 118-130000-1/-3 576056 1163 AILERON TRAVEL GAUGE (1900 UC & UE)
810-1 35-135025-78 LH 576055 1164 AILERON TRAVEL GAUGE (MODEL 55/58/58P) *
810-1 35-135025-79 RH 576054 1165 AILERON TRAVEL GAUGE (MODEL 55/58/58P) *
810-1 50-590091 576059 1160 AILERON TRAVEL GAUGE (MODEL 90 EXCEPT F90)
810-1 50-590095 552062 1140 ELEVATOR TRAVEL GAUGE (MODEL 90, EXCEPT F90)
810-1 50-610000 552052 1134 ELEVATOR MODEL (90 SERIES, EXCEPT F90) *
810-1 60-130001 576052 1166 AILERON TAB TRAVEL GAUGE (MODEL 60) *
810-1 95-524000 552055 1131 ELEVATOR & ELEVATOR TAB TRAVEL GAUGE (MODEL 55/58/
810-2 114-630000-1 554053 1148 RUDDER TAB TRAVEL GAUGE (MODEL 1900 UC)
810-2 118-130000-1 576061 1168 AILERON TAB TRAVEL GAUGE (MODEL 1900 UC & UE)
810-2 96-524000 575054 2096 FLAP TRAVEL GAUGE (MODEL 58P/60)
810-3 35-660040 / -1 (LH/RH) 552059 1138 ELEVATOR TRAVEL GAUGE (MODEL 33/35/36) *
810-45-135030-9 270055 1077 TRIM TAB FREE PLAY CHECK FIXTURE
810-5 35-660040 / -1 (LH/RH) 552063 1139 ELEVATOR TRAVEL GAUGE (MODEL 33/35/36) *
81-111 720067 3085 DIAL INDICATOR
8500 SYSTEM 610071 1192 PROPELLER BALANCING EQUIPMENT
85JU10 121033 6041 KEY SET, BRISTOL KEY SET OF TEN
884FG 341006 5109 ADAPTER, PRESSURE HEAD
90-380034-1/935 770054 1256 CALITRATION ADAPTER TEST BOX- MEGGITT
909932-3-1 732002 6168 TEST SET, ENGINE (TFE731-3)
909932-5-1 732003 5128 TEST SET, ENGINE (TFE731-5)
91-0504-0133 070064 3001 JACK (AXLE)
918352-1-1 710019 6169 CABLE, BREAKOUT BOX- USE W/ 51-916718-1-1
9300A860 230054 2129 CVR TEST PANEL
93210091002-605 720053 2116 ENGINE SLING GARRETT
95-590017 070060 2011 AIRPLANE HOISTING SLING & ADAPTERS
966A1 560051 1157 OPTICAL MICROMETER
96-910002/922 610069 1194 PROP BOLT TORQUE WRENCH ADAPTER
97-000000/939-1 210061 1040 SAFETY BELT, CABIN DOOR (King Air)
97-000000/939-2 210058 1045 SAFETY BELT, CARGO DOOR (1900D)
990-4 273154 1078 STALL WARNING FORCE APPLICATOR
99-590029-1 070059 2012 AIRPLANE HOISTING SLING
99-9008-6000 121034 6042 CHOCKS, NOSE
99-9015-6000 121035 6043 CHOCKS, MAIN
A0101795 324011 5087 GAUGE, TENON WEAR
A0103065 324042 6108 PEG, PEENING (USE WITH AM21749-1)
A0106115 324043 6109 SPANNER, TORQUE (VALVE CORE)
A0107745 324012 5088 SPANNER, MAXARET HYDRAULIC COUPLING
A0109691 324013 5089 TOOL, MAXARET INSTALLATION/EXTRACT
A0115986 324014 5090 GAUGE, HEAT PACK WEAR
A0117370 324015 5091 GAUGE, HEAT PACK WEAR
A0BA5525 710008 6170 STAND, TRANSPORTATION ENGINE
A0BA6052 710009 6171 STAND, TRANSPORTATION ENGINE
A0BA6452 711002 6172 STAND, THRUST REVERSERS
A10444 324018 6110 MACHINE, TIRE REMOVAL
A11262 324007 6111 EXTRACTOR, MAIN WHEEL
A11848 324037 5093 FIXTURE, BRAKE ROTOR ALIGNMENT
A11921 324019 5094 TOOL, BRAKE RESETTING
A125529 324036 5092 TOOL, MAXARET INSTALLATION/EXTRACT
A16803 324020 6112 TOOL, BRAKE RESETTING, IN-SITU
AA1377 324003 6113 FIXTURE, BRAKE ROTOR ALIGNMENT
AA1388 324006 6114 EXTRACTOR, MAIN WHEEL
ADTS405F 341005 6137 TEST SET, AIR DATA SYSTEM - PITOT STATIC
AGS772 290010 6090 TOOL, PIPE FLARING (3/16"-1/2")
AGS773 290007 6091 TOOL, PIPE FLARING (5/8"- 1-1/4")
AM20747 324037 6115 RING, PRESSURE, NOSE WHEEL-USE W/ A10444
AM20749 324041 6116 RING, PRESSURE, MAIN WHEEL-USE W/ A10444
AM21749-1 324009 6117 FIXTURE, BRAKE PAD RIVETING
AM23076 324029 6118 TOOL, LOADING/& EXTRACTION, BRAKE PISTON
AM23077 324030 6119 TOOL, CLAMPING PLATES, BRAKE STATOR
AM23104 324031 6120 DEVICE, LOAD CHECKING, PISTON/ LINER
AM23911 324038 5095 TOOL, MODULATOR ALIGNMENT
AM24562 324032 5096 EXTRACTOR, MLG WHEEL DRIVE BLOCK
AN8508-22 121019 5021 SPANNER, CROWS-FOOT, APU OIL FILLER CAP
AN8508-28 320066 1110 CROW FOOT WRENCH ( M. GEAR AXLE NUT, 1 3/4")
API1549-3 320057 2078 POWER STEERING BREAKOUT BOX(AIRIGHT, UA/UB)(MM 32-
ARIES30 210002 6059 UNIT, AIR CONDITIONING
AS REQUIRED 090052 3006 TOW TUG
AS REQUIRED 120052 3009 COMPRESSED NITROGEN (2000 PSI) WITH REGULATOR VALVE
AS REQUIRED 120053 3010 OXYGEN SERVICING EQUIPMENT
AS REQUIRED 120059 3008 LUBRICATING GUNS
AS REQUIRED 200051 3026 AIR PRESSURE SOURCE OF 9CFM/60PSI/0.1 H2O SEPARATOR
AS REQUIRED 200065 3028 PAINT GUNS (SUCTION TYPE) MINIMUM OF 2
AS REQUIRED 200081 3031 BENCH DRILL PRESS
AS REQUIRED 200086 3043 DYE PENETRANT INSPECTION EQUIPMENT
AS REQUIRED 200087 3041 MAGNAFLUX EQUIPMENT - AVAILABLE
AS REQUIRED 200088 3039 PROTECTED AREA(75 DEG./DUST FREE/AIR FLOW)
AS REQUIRED 200089 3038 EXHAUST FAN
AS REQUIRED 200090 3037 ARC WELDING EQUIPMENT
AS REQUIRED 200091 3036 SMALL ROLL & BEADERS
AS REQUIRED 200092 3035 VACUUM CLEANER
AS REQUIRED 200093 3034 SMALL SHEET METAL HAND BRAKE
AS REQUIRED 200095 3032 BENCH GRINDER
AS REQUIRED 200097 3030 WORK BENCH & VISES
AS REQUIRED 200098 3029 HI LOK INSTALLATION TOOL
AS REQUIRED 200099 3027 CONTROL SURFACE PAINTING SUPPORTS
AS REQUIRED 200100 3042 GAS WELDING EQUIPMENT
AS REQUIRED 200101 3025 DYE PENETRANT INSPECTION EQUIPMENT
AS REQUIRED 200102 3024 SIX TO TEN POWER MAGNIFYING GLASS
AS REQUIRED 200103 3023 CHERRY & CHERRY-LOCK RIVETING TOOLS
AS REQUIRED 200104 3022 SET OF HAND TUBE BENDERS
AS REQUIRED 200105 3021 TUBE CUTTER & FLARING TOOLS-A/C TYPE
AS REQUIRED 200106 3020 SMALL SHEET METAL SHEARS-HAND TYPE
AS REQUIRED 200107 3019 RIVET GUNS & SETS
AS REQUIRED 200108 3018 ELECTRIC OR AIR HAND DRILLS
AS REQUIRED 200110 3033 CHAIN HOIST
AS REQUIRED 200111 3040 HIGH PRESSURE WATER SOURCE
AS REQUIRED 240060 1049 BATTERY TESTING AND CHARGING EQUIPMENT(LEAD ACID)
AS REQUIRED 320079 1111 TEST GAUGE HYDRAULIC (0-1600 PSI)
AS REQUIRED 390051 3066 SOLDERING EQUIPMENT
AS REQUIRED 390052 3067 TERMINAL INSTALLATION EQUIPMENT
AS REQUIRED 390053 3068 WIRE STRIPPER
AS REQUIRED 570076 2090 WING & FUSELAGE CRADLES OR EQUIVALENT
AS REQUIRED 570083 3069 CONTROL SURFACE BALANCING EQUIPMENT
AS REQUIRED 720058 3088 SET OF TORQUE WRENCHES (100, 1500,2500 IN/LBS
AS REQUIRED 720059 3087 0-9 OUTSIDE MICROMETER"
AS REQUIRED 720060 3086 0-1 DEPTH MICROMETER"
AS REQUIRED 720061 3078 CONTINENTAL MOTORS TOOLS FOR CYLINDER REPL.
AS REQUIRED 720062 3073 ENGINE STAND - CONTINENTAL ENGINES/EQUIV.
AS REQUIRED 720063 3072 ENGINE STAND - LYCOMING ENGINES OR/EQUIV.
AS REQUIRED 720064 3071 SPARK PLUG CLEANING & GAPPING EQUIPMENT
AS REQUIRED 720065 3075 VALVE SPRING COMPRESSOR
AS REQUIRED 720066 3076 1 TO 6" MICROMETER SET (OUTSIDE)"
AS REQUIRED 720068 3077 1 TO 6" MICROMETER SET (INSIDE)"
AS REQUIRED 720070 2117 HOT OIL TANK CONTAINING OIL CPW202
AS REQUIRED 720071 3079 LYCOMING TOOLS FOR CYLINDER REPLACEMENT
AS REQUIRED 720072 3080 DIAL INDICATOR
AS REQUIRED 720073 3081 HELICOIL KIT AND TOOLS
AS REQUIRED 720075 3074 VERTICAL ARBOR PRESS
AS REQUIRED 720076 3070 ENGINE CLEANING EQUIPMENT
AS REQUIRED 720089 1211 TEST GAUGE - OIL PRESSURE/FUEL PRES.(0-150 PSI)
AS REQUIRED 720090 1210 SURFACE PLATE
AS REQUIRED 720102 2106 BOROSCOPE (OPTIONAL)
AS REQUIRED 730051 2118 FUEL TEST STAND W/ FLOW METER
ATC-600 340058 3063 DME RAMP TEST SET
ATC600A 341008 6138 TEST SET, TRANSPONDER/DME
ATC-601 340052 3064 TRANSPONDER RAMP TEST SET
AVT300A 122001 6044 WRENCH, TORQUE (40-300 LB/IN,3/8 SQ.)
B5109 610062 2104 FEEDBACK RING PULLER (McCauley)
B5149 610073 2105 SPACER, FEEDBACK RING HOLDER(McCauley)
B5588 610061 1195 WRENCH ADAPTER, 7/8"
B-842 610060 2096 PROP PISTON NUT WRENCH
BAEREF000003243 351002 5113 FLOWMETER, FOR CHECKING CREW OXYGEN MASK
BAEREF000003812 291003 5067 KIT, HYDRAULIC SYSTEM
BAEREF000007007 324038 6121 TEST BLOCK, FERROUS FOR USE WITH BR73
BAEREF000007008 324040 6122 TEST BLOCK, NON FERROUS FOR USE WITH BR73
BAEREF000007634 121036 6045 CYLINDER, OXYGEN REPLENISHMENT
BAEREF000007650 121037 6046 CYLINDER, NITROGEN REPLENISHMENT
BC-18 720074 3082 TIME-RITE
BC-815A 240059 1050 BATTERY CHARGER, JET ELEC BAT PACK
BCCH800-000-486 101045 6016 COVER, WINDSHIELD (OR BAEREF000003787)
BH112JD-101 720103 1229 JET CAL AND ASSOCIATED HARNESSES
BR73 324039 6123 DETECTOR, EDDY CURRENT CRACK
BT51 240009 5027 TESTER, BONDING - 0 TO 20,000 MILLI-OHM
BV45 121038 6047 TOOL BOX, ELECTROMECHANICAL TOOL BOX
CA18185-10-T10 200066 2037 TO INSTALL CA18185
CA18185-10-T11 200080 2038 TO INSTALL CA18185
CA18185-10-T12 200064 2039 TO INSTALL CA18185
CA18185-10-T13 200063 2040 TO INSTALL CA18185
CA2210T-08 (& -10) 200068 2035 RETAINING RING INSTALLATION TOOL(TRIDAIR)
CAZ1062-08-T10 200062 2041 SPLIT RING INSTALLER
CCM150 320002 6124 WRENCH, TORQUE (10-150 LBFT)
CE1 284012 6081 CABLE, FOR USE WITH QAA
CE2-40 341009 5110 KEY, CORRECTOR - SMITHS A2B COMPASS
CGA109 284011 6082 ADAPTER, FOR USE WITH QAA
CGA110 284009 6083 ADAPTER, FOR USE WITH QAA
CGA111 284006 6084 CABLE, FOR USE WITH QAA (700 SERIES 7001-20 ONLY)
CL23 770051 2122 CALIBRATOR/THERMOMETER
COMPUTER, LAPTOP 720115 9702 LAP TOP COMPUTER
CP214C 200061 2042 SQUEEZE
CPWA-32350A 760051 2120 ENGINE INLET PROTECTIVE COVER
CS2395FTS 243010 6065 SPANNER, TORQUE-TERMINAL NUTS (21LBIN)
CST-2834-1 610066 1199 FEEDBACK RING PULLER - 4 BLADE (UE SERIES)
CTR-100-BNC-2 200085 3044 COAX CABLE TERM. CRIMP TOOL
CUAE10 121039 6048 TOOL KIT, LIGHT AIRCRAFT MAINTENANCE SET
D-4390 720088 1212 VU-THRU TACHOMETER
D5945 610065 1200 FEEDBACK COLLAR RETRACTOR,4 BLADE McCauley
D755-1 324039 5097 MACHINE, WHEEL BALANCING
D807-1 114-630000-1 554057 1152 RUDDER TRAVEL GAUGE (MODEL 1900 UE)
D810 114-521021-1/-2 575053 1169 FLAP TRAVEL GAUGE (MODEL 1900 UA & UB)
D810 118-521046-1/-2 575052 1170 FLAP TRAVEL GAUGE (MODEL 1900 UC & UE)
D810-130-610000-87/-88 552056 1135 ELEVATOR TAB (MODEL 1900 UE)
D922-102-910001 240052 2054 ALTERNATOR DRIVE GEAR WRENCH (58P)
DB45-B1 330053 1123 T- LIGHT COMPARATOR (350, 1900 & BJ ONLY)
DC400 W/KA MODULE 101-00802 284053 1096 FUEL QUANTITY TEST EQUIPMENT-GULL
DH344 320004 6125 SOCKET, 11/32AF
, X 1/4( SQ.DRIVE )
DHP801 240012 6066 USE
DHP8014 240013 6067 CASE, FOR DHP801
DRC40-40B 240058 1051 VARIABLE POWER SUPPLY
E100 240053 1052 VOLTAGE REGULATOR TESTING EQUIPMENT
E2 720054 3083 DIFFERENTIAL COMPRESSION TESTER
E25 AND E50 720069 3084 TIMING DISCS & LIGHTS
ED 520 200076 1025 EDDY CURRENT TESTER
ENG17099 561001 5118 BOLT, SLAVE BOLT FOR WINDSCREEN
ESP2092 324040 5098 PUMP, OLEO HYD. REPLEN. RIG
FGK10 320005 6126 PROBE, KNIFE FERROUS (USE WITH BR73)
FHQ100 291002 5068 TOOL, SEAL MANIPULATING
FMG4400D 334001 2131 FLASH MEASURING GUN
FT 320012 6127 PROBE, PENCIL FERROUS (USE WITH BR73)
FZ9-24-1500 121018 5099 GAUGE, INFLATION ADAPTER - 0-1500 PSI
FZ9-24-600 121019 5100 GAUGE, INFLATION ADAPTER - 0-600 PSI
GPU150 240051 2053 AUXILIARY POWER UNIT 12/24 VOLT
GPU400 240057 1053 EXTERNAL POWER UNIT 24 VOLT/300 CONTINUOUS
H7533 200060 2043 HANDLE - #8 OR #10 FASTENER
HB1278 260051 2055 HEATER PROBE JET CAL
HB1625 320011 6128 SOCKET, NLG WHEEL AXLE NUTS - 1 5/8" AF x 3/4" DRIVE
HDV2A 732006 6178 METER, MILLIVOLTS
HEADSETBR73 320010 6129 HEADSET, FOR BR73
HTS2 122005 6049 DRIVER, HI-TORQUE - ONE PIECE TOOL
HWP-12 200084 3045 JO-BOLT INSTALLATION TOOL
IF-ND3-30 510055 1129 BOROSCOPE
IT714 261001 5037 TONGS, HEATING - REAR BAY DETECTORS
J6615ITEM2 291004 6092 EXPANDER, USE W/ AGS773 FLARING STAINLESS STEEL TUBE
JEC1510 101057 6017 BLANK, DORSAL INTAKE (OR P/N 25-6Y1675)
JEC1651 101058 6018 COVER, APU EXHAUST - GARRETT (OR 25-8Y259-1A)
JEC1652 101059 6019 COVER, APU INTAKE - GARRETT
JEC1653 101060 6020 COVER, APU GENERATOR COOLING - GARRETT
JET-X II 240062 1054 GROUND POWER UNIT 24 VOLT/300 CONTINUOUS
JGA75X 300054 3057 SPRAY GUN, DEVILBISS OR BINKS
K1044 121005 6052 COUPLING, TOILET SERVICING (FILL)
K-1073 070061 2013 JACK PAD KIT (ADAPTS JACK PADS TO TRONAIR
K-1152 720078 1222 ENGINE COMPRESSOR WASH ADAPTER
K1285 210063 1038 KING AIR PRESSURIZATION ADAPTER KIT
K1498 210003 6060 KIT, FOR CABIN PRESSURIZATION
K2029 121006 6053 COUPLING, TOILET SERVICING (DUMP)
K-2032 720113 1252 ADAPTERS, ENGINE STAND
K2112 710018 5129 ADAPTER, ENGINE - USE WITH STAND PT. NO 08-2001-0000
K-2115 720087 1218 ADAPTER (PT6A - PT6A-28), USE WITH 08-2001-0000 ST
K-2116 720081 1219 ADAPTER (PT6A-41 - PT6A-65), USE WITH 08-2001-0000
K-2117 720080 1220 ADAPTER (JT15D), USE WITH 08-2001-0000 STAND
K2282 243011 6068 HOIST, BATTERY - LEAD ACID (REQUIRED FOR USE WITH 04-6014-0000)
K-2601 210072 1236 CABIN PRESSURIZATION ADAPTER
KHC-1004 290052 1100 COUPLING KIT
KHC1005 290003 5069 ADAPTERS, HYDRAULIC ADAPTER KIT FOR TRONAIR RIG
KS5549 271060 1238 DIGITAL PROTRACTOR
LA4CR1000/NAS 1756-24 320056 2068 LANDING GEAR PINS (1) (NOSE L. GEAR LOCK)
LA4CR1500/NAS 1756-24 320087 2069 LANDING GEAR PINS (2) (MAIN L. GEAR LOCK)
LA7CR2500/NAS 1756-24 320059 2070 NOSE GEAR DOOR PIN
LOCAL MANUFACTURE 210059 1043 CABIN TEMPERATURE CONTROLLER
LOCAL MANUFACTURE 240054 1057 BATTERY MONITOR FUNCTIONAL TEST
LOCAL MANUFACTURE 271051 1086 ELEVON CONTROL MIXER RIG PIN
LOCAL MANUFACTURE 271058 1085 RIG PIN ELEVON
LOCAL MANUFACTURE 272053 1084 RIG PIN RUDDER
LOCAL MANUFACTURE 320069 1112 TEST CIRCUIT FOR LANDING GEAR TIME DELAY
LOCAL MANUFACTURE 576051 1087 OUTBOARD WING SECTOR RIG PIN
LOCAL MANUFACTURE 612252 1190 SYNCROPHASER BREAKOUT BOX
LOCAL PROCURE 080051 3004 SCALE, 1 TO 5 THOUSAND LBS.
LOCAL PROCURE 080052 1013 PLUMB BOB (SMALL)
LOCAL PROCURE 080054 3003 SPIRIT LEVEL, 18 INCH OR MORE
LOCAL PROCURE 080055 3005 SCALE, 5 TO 15 THOUSAND LBS.
LOCAL PROCURE 200083 3046 STRAP WRENCH
LOCAL PROCURE 280064 3055 FIRE EXTINGUISHER, ABC TYPE
LOCAL PROCURE 284057 3056 EXPLOSION PROOF LIGHT
LOCAL PROCURE 320086 1113 STEERING ANGLE PROTRACTOR
LOCAL PROCURE 320089 3060 ULTRASONIC CLEANER
LOCAL PROCUREMENT 200071 1030 CORROSION TREATMENT FOR MAGNESIUM
LOCAL PURCHASE 070065 3002 PLUMB BOB
LOCAL PURCHASE 210057 3049 GAP TOOL (WIRE)
LTC-3 610059 2097 TORQUE HANDLE(BEFORE AD 83-08-01)
M0DEL825MK4 240015 6070 G.P.U., GROUND POWER UNIT - 2,000A OUTPUT
M400 320077 2071 TIRE SEALANT INJECTOR
M6380 121001 6141 ADAPTER, PORTABLE OXYGEN CHARGING 9/16UNF-1/4BSP
M6381 121002 6142 ADAPTER, PORTABLE OXYGEN CHARGING 9/16UNF-3/8UNF
M806 240016 6071 METER, MULTI-METER
M81969/14 200082 3047 CONTACT INS/EXTRACT TOOL
MB25 243012 6072 CHARGER, BATTERY CHARGER/ANALYZER
ME7-2321C 071002 5006 JACK, MAIN - WING
ME7-3242A 071005 5007 JACK, MAIN - TAIL
ME7-4925 071007 5008 JACK, WHEEL CHANGE-BOTTLE
MET4210 071008 5009 TRESTLE, SUPPORT, USE W/ 25Y331,332 & 535
MIA-2500 510056 2082 A. SCANNER
MODEL 2850 230052 1046 MEGOHMMETER
MODEL 4005 320060 2072 HAND PRES. POT BLEEDER
MODEL 77 200072 1029 MULTIMETER, FLUKE
MODEL 913BB1AC 210070 2123 TEMPERATURE BATH
MODEL4A 320009 6130 FLYPRESS, STANDARD
MODEL825MK2 240014 6069 G.P.U., GROUND POWER UNIT - 2,000A OUTPUT
MS3191-03 260054 3051 CRIMPING TOOL
MS90455-1 260056 3052 INSERTION TOOL
MS90546-1 260055 3053 EXTRACTING TOOL
NA42265H2 121040 6054 TROLLEY, OXYGEN REPLENISHMENT - BOTTLES NOT SUPPLIED
NA42269-2 121041 6055 TROLLEY, NITROGEN REPLENISHMENT - BOTTLES NOT SUPPLIED
NAV 401 340051 3065 VOR/ILS TESTER, RAMP
NAV402AP 341007 6139 TEST SET, MARKER/NAV/COMM
NB0075-1516 121046 6056 KIT, WINDOW CLEANING KIT
NDT-12 510051 2083 ULTRASONIC UNIT
NFK11 320008 6131 PROBE, KNIFE NON-FERROUS (WITH BR73)
NFT 320007 6132 PROBE, PENCIL NON-FERROUS (WITH BR73)
NO 4 FORD CUP 300055 3058 PAINT MIX CUP
No. 98 082051 1257 CALIBRATED SPIRIT LEVEL
NP45S 200109 3048 BONDING BRUSH-PILOTED, STAINLESS STEEL
NTG2604MSB 121003 5022 GAUGE, TIRE PRESSURE
OW1012 121020 6022 SPANNER, 5/16 X 3/8 WHITWORTH OPEN END
OW2832 121026 6028 SPANNER, 7/8 X 1" WHITWORTH OPEN ENDED
P4924-26H-01SA 350052 4003 PURGE ADAPTER,O2
PBH-FCHF-DPYS-8-10CB 200059 2044 DEUTSCHE PULLER KIT (HERNDON)
PDT286B 210069 1044 JANITROL HEATER PRESSURE TESTER
PE11026 732029 6179 BLEED PIPE, RATE RESET VALVE
PE15841 732030 6180 SPANNER, FUEL PUMP MOUNTING NUTS
PE16117 732031 6181 EXTRACTOR, BLOW OFF VALVE SLEEVE
PE1617 732032 6182 SPANNER, OIL TANK RELIEF VALVE
PE17207 732027 6183 ADAPTER, OIL PRESSURE FILTER PRIMING
PE17432 732020 6184 TOOL, TABBING GENERAL APPLICATION
PE17433 732009 6185 ADJUSTER, PRESSURE (P1) TO BLOW OFF VAL.
PE18599 732010 6186 SPANNER, ACCESSORY GEARBOX NUTS
PE18600 732011 6187 ADAPTER, MICRO PUMPS PRIMING
PE22712 732012 6188 DRAIN TOOL, OIL TANK
PE25368 732005 6189 BLEED TOOL, FUEL PUMP/L.P.FILTER
PE2621 732013 6190 RATCHET, USED WITH PE2617 OR PE28707
PE28707 732001 6191 SPANNER, IGNITER PLUG
PE3424 732014 6192 TOOL, ELECT.PLUG ADAPTERS (SIZE A)
PE4483 732015 6193 SYRINGE, GEARBOX PRIMING
PE4484 732008 6194 PIPE, GEARBOX PRIMING
PE4485 732017 6195 ADAPTER, GEARBOX PRIMING
PE4797 732022 6196 SPANNER, IDLE SPEED ADJUSTER
PE7390 732023 6197 SPANNER, OIL TANK CONNECTION
PE7483 732019 6198 TOOL, ELECT.PLUG ADAPTERS (SIZE Z)
PE7493 732025 6199 BLADE, EXHAUST CONE REMOVAL
PE8653 732018 6200 SOCKET, EXHAUST CONE REMOVAL
PE8709 732021 6201 SPANNER, DRAIN VALVE RETAINING NUT
PORT-A-TEST UNIT 720077 1213 2 CALIBRATED LARGE DIAL PRESSURE GAGES(0-30 PSI)
PP322-1 732004 6202 POTENTIOMETER, D.C.
PSS88340-3-4-4 340056 1125 NAV-AIDS PITOT STATIC ADAPTER (1900)
PSS88364-3-4-4 340055 1126 NAV-AIDS PITOT STATIC ADAPTER (STARSHIP)
PTF 7533 200058 2045 YOKE ASSEMBLY
PWC30114-16 610068 1196 RETAINING NUT WRENCH, PROP GOV.
QAA 284008 6085 TESTSET, FUEL INDICATING SYSTEM
QUICKSET 320003 6133 DRIVER, TORQUE, 1-4 SQ DRIVE (CAPACITY 5-45 LBIN)
R2-21A5 351003 5114 SEAL, USED W/ 510057, OXYGEN SYSTEM TEST
RB 6527-2 200057 2046 REMOVAL TOOL
RD-375 510052 2084 PROBE, ULTRASONIC
RF80H 240056 1055 BATTERY TESTING/CHARGING EQUIPMENT(NI-CAD)
RM601 090001 6009 TRACTOR, TUG
RSE1192 780001 5130 TOOL, STRAIGHT EDGE - RIGGING THRUST REVERSER
RSE1211 780002 5131 PIN, T/R GROUND LOCKOUT CONTROL VALVE
RSE1218 780003 5132 ADAPTER, THRUST REVERSER LATCH TEST
SA010321 324041 6134 GAUGE, PAD WEAR
SA30088 324005 5101 FIXTURE, BRAKE ROTOR ALIGNMENT (REPLACES AA1377)
SA30089 324021 5102 TOOL, BRAKE RESETTING, BRAKES IN-SITU (REPLACES A 16803)
SA30090 324008 6135 EXTRACTOR, MAIN WHEEL (REPLACES AA1388)
SAM20084 324017 5103 GAUGE, HEAT PACK WEAR (EQUV. TO A0125601)
SBH - 7/8 610058 2098 BOX HEAD
SBH - 9/16 610057 2099 BOX HEAD
SK100360 (SAFE FLIGHT) 273152 1079 STALL WARNING BREAKOUT BOX
SPL3652 710001 5133 ADAPTER, TORQUE WRENCH, ALTNTR MOUNTING
SRM 1850 200075 1026 TEST BLOCK, FLUORESCENT PENETRANT
SSDRT1-2 320006 6136 HEAD, 1-2 IN SQUARE DRIVE RATCHET - FOR USE WITH CCM150
STO-3998 510053 2085 PROBE, A. SCANNER
T-00690 320074 1114 GLANDNUT WRENCH
T-00741 or TK2281/936 320073 1115 SHIMMY DAMPNER TOOL
T1819AY 200056 2047 UNIVERSAL WRENCH
T2BJ1040SN 732024 6203 SOCKET, EXHAUST CONE REMOVAL
T2BJ1326SN 732016 6204 SOCKET, EXHAUST CONE REMOVAL
T2EC3022SN 732026 6205 EXTENSION, EXHAUST CONE REMOVAL
T300-112A 300002 6096 TOOL, CLENCHING, SIMPLIFIX DE-ICE COUPLINGS
T300-120A 300001 6097 TOOL, CLENCHING, SIMPLIFIX DE-ICE COUPLINGS
T5-2002-104-00 270052 1082 TENSIOMETER
T5-2002-401-00 270001 5057 TENSIOMETER, CABLE
TB121 082003 5012 CLINOMETER
TBD 570092 1245 ALIGNMENT TOOL FOR L.E. RIB INSTALLATION (MYLAR DRAWING)
TBD 570093 1246 ALIGNMENT TOOL FOR L.E. INSTALATION (MYLAR DRAWING)
TDMC-90 240064 1237 LEAD ACID BATTERY CHARGER
TE-100TB 270057 1230 UNIVERSAL TRAVEL BOARD
TE79-2001/935-2 284052 1097 FUEL QUANTITY SYSTEM ANALYZER
TE792003/935-1 271052 1088 HYD. LOCK SOLINOID BREAKOUT BOX
TE792003/935-1 271059 1080 BREAKOUT BOX FWD WING
TE79-390BLDN/939 275053 2127 BLOW DOWN CHARGING TOOL
TE79-390NET/934-1 210071 1235 SAFETY NET, CABIN DOOR
TE79-400A/935 284051 1098 FUEL QUANTITY TESTER
TK 1729-4 120051 2034 DEFUEL KIT(REF. MM 12-10-00)
TK 1980/928-1 610051 1197 PROP BOLT TORQUE ADAPTER
TK-1518 070070 2014 JACK ADAPTER OR EYEBOLT/BUSHING KIT
TK-1521 330051 3061 INSTRUMENT POST LIGHT WRENCH
TK-1573/D918-5 610064 1201 BETA RETRACTOR TOOL
TK1573-918 610052 1202 FEEDBACK RING PULLER - 3 BLADE
TK1573-918-1 610063 1203 FEEDBACK RING PULLER - 4 BLADE(NOT UE)
TK1738-6/939-2 120062 1019 O2 SYSTEM TEST EQUIPMENT
TK1763-2/935 320072 1116 NOSE GEAR POSITION SWITCH TEST BOX
TK1763-5/935 320071 1117 MAIN GEAR POSITION SWITCH TEST BOX
TK1763-7/935 320070 1118 MLG SWITCH TEST BOX
TK1783-1/939 340053 4005 PITOT STATIC TESTER
TK1783-3/939-1 340057 1124 PITOT ADAPTER
TK1794-5/939 210052 2051 ADAPTER PLATE
TK1812-3 922 610056 2100 BOX HEAD (B100 PROPELLER BOLTS)
TK1814/932-3ASSYB 071025 1232 NOSE JACK ADAPTER FITTING
TK1817 922-4 570054 1173 WING BOLT WRENCH 13/16" BOX END
TK1817 922-5 570053 1174 WING BOLT WRENCH 15/16" BOX END
TK1817 922-6 570057 1175 WING BOLT WRENCH 1" BOX END
TK1999/935 240055 1056 GENERATOR CONTROL TEST UNIT(BREAKOUT BOX)
TK-2031/TC917 570052 1171 TORQUE ADAPTER
TK2032 550074 2088 SPANNER WRENCH
TK2091/917 720108 1247 EXTENSION, STARTER- GENERATOR REMOVAL
TK2091/922 720109 1248 WRENCH, STARTER- GENERATOR REMOVAL
TK2092/917 322010 1244 LANDING GEAR PIN PULLER
TK2146/935-2 200070 1031 DIGITAL LOW RESISTANCE OHMMETER (BIDDLE TESTER)
TK2209-935 200069 1032 M.O.V. TEST BOX
TK2240/939 720110 1249 ENGINE BLEED AIR BLANKING PLATE
TK229/939 320062 2074 HAND HYD PUMP(ALTERNATE-HYD GEAR ONLY)
TK229-1/939 320061 2073 MECHANICAL HYD PUMP(HYD GEAR ONLY)
TK889-2 D928 320063 2075 BLEEDER HOSE ADAPTER
TK889-2D928 320085 1120 BLEEDER HOSE ASSY. - LOCAL MFG.
TL37102-102 720116 9703 TOOL, SHAFT STRETCH
TL37220 720118 9705 ADAPTER, TORQUE
TL37244 720119 9706 ENGINE ROTATION TOOL
TL37253 720121 9708 MOUNT, ENGINE VIBRATION
TL37255 720120 9707 FITTING, OIL DRAIN
TL37270 720122 9709 TORQUE ADAPTER GEAR BOX BREATHER VENT TUBE
TL37321 720114 9701 GUAGE, IGNITOR 4 POLE
TL37330 720117 9704 SOCKET, FUEL NOZZLE ADAPTER
TL39454 720126 9713 TORQUE ADAPTER, FUEL DELTA P SWITCH
TL65047 720127 9714 PULLER, DRAIN TUBE
TL99500 720123 9710 WRENCH, LP SHAFT FORWARD NUT
TL99501 720124 9711 PULLER ASSY., SPINNER PILOT PLATE
TL99502 720125 9712 PULLER ASSY., FAN
TMC105A 710022 6173 DRIVE-BIT, 1/4 SQ DRIVE- 1/4" x 0.033" BLADE TIP
TOFBKIT125 711004 6174 ENDOPROBE, BASIC RIGID ENDOPROBE KIT
TP222 270054 1081 CABLE TENSION METER
TQ50A 610067 1198 PROPELLER WRENCH, 0-600 IN/LBS
TS 1171 270053 1083 TORQUE ADAPTER, NUT-FLIGHT CONTROL SYS
TS 1469 510057 2086 TAP HAMMER
TS100 230053 2128 ULB PORTABLE TEST SET
TS1176-1 570073 4004 WING BOLT NUT TORQUE ADAPTER 3/4" INT. WRENCH
TS1176-10 (TS1171-10) 570055 1176 WING BOLT NUT TORQUE ADAPTER 15/16" EXT. WRENCH
TS1176-2 (TS1171-2, TS1222-2) 570090 1180 WING BOLT NUT TORQUE ADAPTER 7/8" INT. WRENCH
TS1176-7 570051 1177 WING BOLT NUT TORQUE ADAPTER 25/32" EXT. WRENCH
TS1187-1 570077 2091 WING BOLT WRENCHES (BONANZAS D1-D1501)
TS1195 570078 2092 WING BOLT WRENCH (BONANZAS D1-D1501)
TS120R133A 282003 6086 ADAPTER, VENTRAL TANK FUEL
TS120R141A 282004 6087 ADAPTER, VENTRAL TANK FUEL FLOW CHECKS
TS1222-1 570079 2093 WING BOLT NUT SPIN ON WRENCHES 7/8" INT. WRENCH
TS1222-2 570091 2094 WING BOLT NUT SPIN ON WRENCHES 3/4" INT. WRENCH
TS1222-3 570089 1181 WING BOLT WRENCH 5/8" INT. WRENCH
TS1584N 570086 1184 WING BOLT WRENCH 1 1/16" EXT. WRENCH
TS2E13A 262001 5038 ADAPTER, BOTTLE GONE INDICATOR
TSM4445F4F40SS 282005 5065 HOSE, FLEXIBLE, USE W/ 25YTS303R1A & 25YTS303R17A
TW6AD 121047 6057 DRIVE BIT, 5/16 HEX-1/4 TRIWING (W/S "C" PANEL)
UBF93110-TU 330054 1254 LIGHTING TEST UNIT
UVX RADIOMETER 200073 1028 ULTRAVIOLET IRRADIANCE TESTER
W10-06-1 561002 6147 WRENCH, HEX-INTERNAL
WB808-10UNF 240003 5028 SPANNER, TERMINAL NUTS PRE-SET 22LB-IN.
WB808-1146 240004 5029 SPANNER, TERMINAL NUTS (9LBIN) 6-32 UNC.
WB808-1146B 240005 5030 SPANNER, TERMINAL NUTS (6LBIN) 6-32 UNC
WB808-1246B 240006 5031 SPANNER, TERMINAL NUTS (3.5LBIN) 4/40UNC
WB808-1346 240007 5032 SPANNER, TERMINAL NUTS(22LBIN) 10-32 UNF
WB808-1680 308001 5070 INDICATOR, ICE DETECTOR TORQUE
WB808-4UNC 240001 5033 SPANNER, TERMINAL NUTS (3.5LBIN)
WB808-6UNC 240002 5034 SPANNER, TERMINAL NUTS (9LBIN)
WIDS107G 341001 5111 ADAPTER, STALL VENT
WM6 240017 6073 TESTER, INSULATION - 250 & 500 VOLT
WT-107901 760053 2121 MAX N1 SHIM TOOL
XW20509 300051 2062 WIPER ARM TENSION ADJUSTMENT WRENCH
Z737 120057 3011 GREASE NOZZLE (NEEDLE TYPE)
INDEX BY SERIES REFERENCE
Reference ATA Tool Number Nomenclature
0 000000 .TOOL PICTURE CATALOG. PHOTOS AND SKETCHES OF REQUIRED TOOLS
1001 070062 02-0522-0140 JACKS (3 REQUIRED FOR MODEL 60)
1002 070069 02-0530-0110 JACK
1003 070068 02-0532-0110 JACK (KA 200 W/HIGH FLOTATION GEAR, STARSHIP NLG)
1004 070071 02-0536-0110 HYDRAULIC AIRCRAFT JACK
1005 070072 02-0544-0110 JACK
1006 070073 03-4006-0000 JACKING STABILIZATION TAIL STAND
1008 070074 045A-99225-01 JACK PAD KIT
1009 070067 122-100072-7 JACK ADAPTER (3)
1010 070075 35-590021 TAIL SUPPORT ASSEMBLY W/WEIGHT
1011 080056 122-590014-1 TIE DOWN RING
1012 080053 114-590025-1 PLUMB BOB SUPPORT
1013 080052 LOCAL PROCURE PLUMB BOB (SMALL)
1014 090057 45-590075 TRACTOR TOW BAR 33, 35, 55 & 95
1015 090055 45A91715-1 TOW BAR(BEECHJET & PREMIER)
1016 090058 01-1109-0000 TRACTOR TOW BAR
1017 120055 04-6150-5000 CRANE - BOOM HEIGHT AT LEAST 12 FT.
1018 120058 50-590106 WRENCH - SUMP DRAIN
1019 120062 TK1738-6/939-2 O2 SYSTEM TEST EQUIPMENT
1020 120061 122-590015-1 FUEL SUMP DRAIN WRENCH
1022 200079 04-6012-1100 WORK STAND - B5 TYPE
1024 200077 6200-3/16 BH-BNC (&-1/4) EDDY CURRENT TEST PROBES
1025 200076 ED 520 EDDY CURRENT TESTER
1026 200075 SRM 1850 TEST BLOCK, FLUORESCENT PENETRANT
1027 200074 14798 KIT FLUORESCENT PENETRANT INSPECTION KIT
1028 200073 UVX RADIOMETER ULTRAVIOLET IRRADIANCE TESTER
1029 200072 MODEL 77 MULTIMETER, FLUKE
1030 200071 LOCAL PROCUREMENT CORROSION TREATMENT FOR MAGNESIUM
1031 200070 TK2146/935-2 DIGITAL LOW RESISTANCE OHMMETER (BIDDLE TESTER)
1032 200069 TK2209-935 M.O.V. TEST BOX
1033 210068 012-14830 THERMISTOR VACUUM GAGE (MEASURES IN MICRONS) R12
1036 210065 17600B AIR COND. SERVICING EQUIP.-CHARGING /W VACUUM(R134)
1037 210064 15-7602-1000 GROUND PRESSURIZATION BLOWER,200CFM @ 12 PSI MIN.
1038 210063 K1285 KING AIR PRESSURIZATION ADAPTER KIT
1039 210062 129-000000/939-1 SAFETY NET, CABIN DOOR(1900D)
1040 210061 97-000000/939-1 SAFETY BELT, CABIN DOOR (King Air)
1041 210060 1211-8W WATER MANOMETER (FOR A/C USE)
1042 210051 1E30-2 FLOW CONTROL VALVE TEST BOX
1043 210059 LOCAL MANUFACTURE CABIN TEMPERATURE CONTROLLER
1044 210069 PDT286B JANITROL HEATER PRESSURE TESTER
1045 210058 97-000000/939-2 SAFETY BELT, CARGO DOOR (1900D)
1046 230052 MODEL 2850 MEGOHMMETER
1047 238051 19B99500 MAINTENANCE TERMINAL SOFTWARE(NOISE SUPPR.)
1048 240061 01-0314-02 UNIVERSAL BREAKOUT BOX AND CABLES(RK2 & AFTER)
1049 240060 AS REQUIRED BATTERY TESTING AND CHARGING EQUIPMENT(LEAD ACID)
1050 240059 BC-815A BATTERY CHARGER, JET ELEC BAT PACK
1051 240058 DRC40-40B VARIABLE POWER SUPPLY
1052 240053 E100 VOLTAGE REGULATOR TESTING EQUIPMENT
1053 240057 GPU400 EXTERNAL POWER UNIT 24 VOLT/300 CONTINUOUS
1054 240062 JET-X II GROUND POWER UNIT 24 VOLT/300 CONTINUOUS
1055 240056 RF80H BATTERY TESTING/CHARGING EQUIPMENT(NI-CAD)
1056 240055 TK1999/935 GENERATOR CONTROL TEST UNIT(BREAKOUT BOX)
1057 240054 LOCAL MANUFACTURE BATTERY MONITOR FUNCTIONAL TEST
1058 260053 45A01776/935 ENGINE FIRE EXT/DET SYS TESTER
1059 260052 13060A SQUIB TESTER (HTL)
1060 270050 045A-99144-001 RIG PIN SET
1061 271057 045A-99226-001 PROTRACTOR ASSY
1062 271056 045A-99228-001 PROTRACTOR ASSY
1063 273153 122-040149/935 STALL WARNING BREAKOUT BOX
1064 271055 122-130000-3/D810-3 ELEVON TRAVEL BOARD
1065 271054 122-130000-4/D810-4 ELEVON TRAVEL BOARD
1066 275051 122-381014/935 FLAP ACT TEST BOX
1067 271053 122-410700-25 FWD WING RIG PIN
1068 275052 122-610000-1/D810 FLAP TRAVEL BOARD
1069 273055 122-610000-2/D810 FLAP TRAVEL BOARD
1070 273054 122-610000-5/D810 ELEVATOR TRAVEL BOARD
1071 273053 122-610000-6/D810 ELEVATOR TRAVEL BOARD
1072 273052 122-620000-1/K41498 FORWARD WING TRAVEL BOARD
1073 273051 122-620000-2/K41499 FORWARD WING TRAVEL BOARD
1074 272051 122-630000-3/D810-1 RUDDER L/H TRAVEL BOARD
1075 272052 122-630000-4/D810-2 RUDDER R/H TRAVEL BOARD
1076 273151 1952-1-3-5 STALL WARNING FORCE APPLICATOR
1077 270055 810-45-135030-9 TRIM TAB FREE PLAY CHECK FIXTURE
1078 273154 990-4 STALL WARNING FORCE APPLICATOR
1079 273152 SK100360 (SAFE FLIGHT) STALL WARNING BREAKOUT BOX
1080 271059 TE792003/935-1 BREAKOUT BOX FWD WING
1081 270054 TP222 CABLE TENSION METER
1082 270052 T5-2002-104-00 TENSIOMETER
1083 270053 TS 1171 TORQUE ADAPTER, NUT-FLIGHT CONTROL SYS
1084 272053 LOCAL MANUFACTURE RIG PIN RUDDER
1085 271058 LOCAL MANUFACTURE RIG PIN ELEVON
1086 271051 LOCAL MANUFACTURE ELEVON CONTROL MIXER RIG PIN
1087 576051 LOCAL MANUFACTURE OUTBOARD WING SECTOR RIG PIN
1088 271052 TE792003/935-1 HYD. LOCK SOLINOID BREAKOUT BOX
1089 284060 101-00477A FUEL QUANTITY TEST CABLE - WING TANK
1090 284052 101-00477B FUEL QUANTITY TEST CABLE -FUSELAGE TANK
1091 284058 101-00489 FUEL QUANTITY TEST CABLE - BRANSON TANK
1092 284056 101-00814 FUEL PROBE ADAPTER
1093 284059 114-389001/935 FUEL QUANTITY PROBE BREAKOUT TEST(UA/UB)
1094 284055 118-389004/935 FUEL QUANTITY PROBE BREAKOUT TEST(UC/UE)
1095 284054 2548H FUEL QUANTITY TEST EQUIPMENT -CONSOLIDATED
1096 284053 DC400 W/KA MODULE 101-00802 FUEL QUANTITY TEST EQUIPMENT-GULL
1097 284052 TE79-2001/935-2 FUEL QUANTITY SYSTEM ANALYZER
1098 284051 TE79-400A/935 FUEL QUANTITY TESTER
1099 290051 05-7015-1100 HYDRAULIC POWER UNIT
1100 290052 KHC-1004 COUPLING KIT
1102 300052 74-451-74 BFG RUBBER HAND ROLLER
1103 310051 128-11218/935 TAIL DE-ICE TEST SET
1104 320051 045A-99142-001 PIN PULLER
1105 320083 06-4005-0501 HYDRAULIC HAND PUMP (0-3000 PSI)
1106 320082 114-810055-939 WHEEL DRIVE CLIP (1900 SERIES)
1107 320081 122-810001/935-1 MAIN GEAR TEST BOX (MM 32-60-00)
1108 320076 122-820000/935-2 NOSE GEAR TEST BOX (MM 32-60-00)
1109 320080 45-590074-7 LANDING GEAR TENSION GAGE ASSEMBLY
1110 320066 AN8508-28 CROW FOOT WRENCH ( M. GEAR AXLE NUT, 1 3/4")
1111 320079 AS REQUIRED TEST GAUGE HYDRAULIC (0-1600 PSI)
1112 320069 LOCAL MANUFACTURE TEST CIRCUIT FOR LANDING GEAR TIME DELAY
1113 320086 LOCAL PROCURE STEERING ANGLE PROTRACTOR
1114 320074 T-00690 GLANDNUT WRENCH
1115 320073 T-00741 or TK2281/936 SHIMMY DAMPNER TOOL
1116 320072 TK1763-2/935 NOSE GEAR POSITION SWITCH TEST BOX
1117 320071 TK1763-5/935 MAIN GEAR POSITION SWITCH TEST BOX
1118 320070 TK1763-7/935 MLG SWITCH TEST BOX
1119 320084 122-590017-3 NOSE GEAR DOOR LOCKPIN
1120 320085 TK889-2D928 BLEEDER HOSE ASSY. - LOCAL MFG.
1121 320078 122-820000/935-2 NOSE GEAR TEST BOX
1122 320064 122-810001/935-1 MAIN GEAR TEST BOX
1123 330053 DB45-B1 T- LIGHT COMPARATOR (350, 1900 & BJ ONLY)
1124 340057 TK1783-3/939-1 PITOT ADAPTER
1125 340056 PSS88340-3-4-4 NAV-AIDS PITOT STATIC ADAPTER (1900)
1126 340055 PSS88364-3-4-4 NAV-AIDS PITOT STATIC ADAPTER (STARSHIP)
1127 350051 4460102-2 TOOL, O-RING REPLACEMENT (O2 SHUTOFF VALVE)
1129 510055 IF-ND3-30 BOROSCOPE
1130 520051 101-590052-1 CARGO DOOR LATCH WRENCH(CARGO DOOR AND 1900)
1131 552055 810-1 95-524000 ELEVATOR & ELEVATOR TAB TRAVEL GAUGE (MODEL 55/58/
1132 552060 807 60-610000 RH & LH ELEVATOR & ELEVATOR TAB TRAVEL GAUGE (MODEL 60) *
1133 552053 807 101-610000-1/-2 ELEVATOR & ELEVATOR TRIM TAB (F90/200/B300/1900)*
1134 552052 810-1 50-610000 ELEVATOR MODEL (90 SERIES, EXCEPT F90) *
1135 552056 D810-130-610000-87/-88 ELEVATOR TAB (MODEL 1900 UE)
1136 552057 810 50-590096 ELEVATOR TAB TRAVEL GAUGE (90 SERIES, EXCEPT F90)
1137 552058 810 130-610000 ELEVATOR TAB TRAVEL GAUGE (MODEL 350)
1138 552059 810-3 35-660040 / -1 (LH/RH) ELEVATOR TRAVEL GAUGE (MODEL 33/35/36) *
1139 552063 810-5 35-660040 / -1 (LH/RH) ELEVATOR TRAVEL GAUGE (MODEL 33/35/36) *
1140 552062 810-1 50-590095 ELEVATOR TRAVEL GAUGE (MODEL 90, EXCEPT F90)
1141 552051 810 115-590033 ELEVATOR TRAVEL GAUGE (MODEL 99/100) *
1142 552061 810 35-660043-2 ELEVATOR TRIM TAB GAUGE (MODEL 33/35/36) *
1143 550071 35-590087-1 JIG ASSEMBLY - DIFFERENTIAL MECHANISM
1144 552054 35-590076 SHAFT ASSEMBLY - DIFFERENTIAL MECHANISM
1145 554051 807 101-630000-1 RUDDER & RUDDER TAB TRAVEL GAUGE (F90/200/300/350)
1146 554052 807 60-630001 RUDDER & RUDDER TAB TRAVEL GAUGE (MODEL 60) *
1147 554062 810-1 114-630000-1 RUDDER TAB TRAVEL GAUGE (MODEL 1900 UA-UB)
1148 554053 810-2 114-630000-1 RUDDER TAB TRAVEL GAUGE (MODEL 1900 UC)
1149 554054 810 130-630000-1 RUDDER TAB TRAVEL GAUGE (MODEL 350/1900 UE)
1150 554055 810 96-630000-1 RUDDER TAB TRAVEL GAUGE (MODEL 55/58/58P)
1151 554056 810 96-630000-207 RUDDER TAB TRAVEL GAUGE (MODEL 90,EXCEPTF90/99/100)
1152 554057 D807-1 114-630000-1 RUDDER TRAVEL GAUGE (MODEL 1900 UE)
1153 554058 807 114-630000-1 RUDDER TRAVEL GAUGE (1900'S,UA-UC)
1154 554059 810 33-524000 RUDDER TRAVEL GAUGE (33/36) *
1155 554060 810 96-524000 RUDDER TRAVEL GAUGE (MODEL 55/58/58P/90, EXCEPT F90)
1156 554061 810 115-590039 RUDDER TRAVEL GAUGE (MODEL 99/100)
1157 560051 966A1 OPTICAL MICROMETER
1158 570074 35-588 S WING HINGE PIN INSTALLATION TUBING
1159 576060 810 50-590091 AILERON TRAVEL GAUGE (MODEL 33/35/36) *
1160 576059 810-1 50-590091 AILERON TRAVEL GAUGE (MODEL 90 EXCEPT F90)
1161 576058 810 60-130001 AILERON TRAVEL GAUGE (MODEL 60) *
1162 576057 810 99-524000 (LH & RH) AILERON TRAVEL GAUGE (F90/99/100/200/300/350/1900
1163 576056 810-1 118-130000-1/-3 AILERON TRAVEL GAUGE (1900 UC & UE)
1164 576055 810-1 35-135025-78 LH AILERON TRAVEL GAUGE (MODEL 55/58/58P) *
1165 576054 810-1 35-135025-79 RH AILERON TRAVEL GAUGE (MODEL 55/58/58P) *
1166 576052 810-1 60-130001 AILERON TAB TRAVEL GAUGE (MODEL 60) *
1167 576053 810-1 101-130001-1 AILERON TAB TRAVEL GAUGE (MODEL 300/350/1900UA
1168 576061 810-2 118-130000-1 AILERON TAB TRAVEL GAUGE (MODEL 1900 UC & UE)
1169 575053 D810 114-521021-1/-2 FLAP TRAVEL GAUGE (MODEL 1900 UA & UB)
1170 575052 D810 118-521046-1/-2 FLAP TRAVEL GAUGE (MODEL 1900 UC & UE)
1171 570052 TK-2031/TC917 TORQUE ADAPTER
1172 570058 50-590013-1 WING BOLT NUT TORQUE ADAPTER
1173 570054 TK1817 922-4 WING BOLT WRENCH 13/16" BOX END
1174 570053 TK1817 922-5 WING BOLT WRENCH 15/16" BOX END
1175 570057 TK1817 922-6 WING BOLT WRENCH 1" BOX END
1176 570055 TS1176-10 (TS1171-10) WING BOLT NUT TORQUE ADAPTER 15/16" EXT. WRENCH
1177 570051 TS1176-7 WING BOLT NUT TORQUE ADAPTER 25/32" EXT. WRENCH
1180 570090 TS1176-2 (TS1171-2, TS1222-2) WING BOLT NUT TORQUE ADAPTER 7/8" INT. WRENCH
1181 570089 TS1222-3 WING BOLT WRENCH 5/8" INT. WRENCH
1184 570086 TS1584N WING BOLT WRENCH 1 1/16" EXT. WRENCH
1185 570085 50-590014 WING BOLT WRENCH 1 1/16" EXT. WRENCH
1186 570080 10996 PIN ALIGNMENT PIN LOWER FORWARD WING(3 ELEMENT)
1188 570063 1751DIN TORQUE WRENCH 1/4 DRIVE,0-75 IN/LBS(3 ELEMENT)
1190 612252 LOCAL MANUFACTURE SYNCROPHASER BREAKOUT BOX
1192 610071 8500 SYSTEM PROPELLER BALANCING EQUIPMENT
1194 610069 96-910002/922 PROP BOLT TORQUE WRENCH ADAPTER
1195 610061 B5588 WRENCH ADAPTER, 7/8"
1196 610068 PWC30114-16 RETAINING NUT WRENCH, PROP GOV.
1197 610051 TK 1980/928-1 PROP BOLT TORQUE ADAPTER
1198 610067 TQ50A PROPELLER WRENCH, 0-600 IN/LBS
1199 610066 CST-2834-1 FEEDBACK RING PULLER - 4 BLADE (UE SERIES)
1200 610065 D5945 FEEDBACK COLLAR RETRACTOR,4 BLADE McCauley
1201 610064 TK-1573/D918-5 BETA RETRACTOR TOOL
1202 610052 TK1573-918 FEEDBACK RING PULLER - 3 BLADE
1203 610063 TK1573-918-1 FEEDBACK RING PULLER - 4 BLADE(NOT UE)
1204 720056 1004-1 TIT INDICATION SYSTEM TEST UNIT (ALCOR)
1205 720095 10A4555S AVGAS FLOWRATER, 20-200 PPH, AVGAS (REF: S/N8010A0292A1)
1206 720094 11-8950-1 OR -2 IGNITION HARNESS TEST EQUIPMENT
1210 720090 AS REQUIRED SURFACE PLATE
1211 720089 AS REQUIRED TEST GAUGE - OIL PRESSURE/FUEL PRES.(0-150 PSI)
1212 720088 D-4390 VU-THRU TACHOMETER
1213 720077 PORT-A-TEST UNIT 2 CALIBRATED LARGE DIAL PRESSURE GAGES(0-30 PSI)
1214 720086 08-0100-4000 ENGINE SLING (PT6A - PT6A-28)
1215 720096 08-0102-4000 ENGINE SLING (PT6A-41 - PT6A-65)
1216 720099 08-0114-4010 ENGINE SLING
1217 720083 08-2001-0000 ENGINE STAND (PT6/JT15D), USE WITH K-2116/2117/211
1218 720087 K-2115 ADAPTER (PT6A - PT6A-28), USE WITH 08-2001-0000 ST
1219 720081 K-2116 ADAPTER (PT6A-41 - PT6A-65), USE WITH 08-2001-0000
1220 720080 K-2117 ADAPTER (JT15D), USE WITH 08-2001-0000 STAND
1221 720079 08-4049-1010 ENGINE COMPRESSOR WASHER, USE WITH K-1152 ADP.
1222 720078 K-1152 ENGINE COMPRESSOR WASH ADAPTER
1223 720085 101-000000/934 TORQUE SYSTEM PRESSURE TESTER
1224 720101 101-930023-5 OIL DRAIN TUBE
1225 720105 114-930022-1 OIL DRAIN TUBE
1226 720106 10A4555S JETA FLOWRATOR METER (80-800 LBS)SPEC GRAV 0.77/80-800
1227 720107 2312-G TURBINE TEMPERATURE INDICATING SYS TESTER (BARFIELD)
1228 720104 3117310000 PRONTO PLUS DIGITAL THERMOMETER
1229 720103 BH112JD-101 JET CAL AND ASSOCIATED HARNESSES
1230 270057 TE-100TB UNIVERSAL TRAVEL BOARD
1232 071025 TK1814/932-3ASSYB NOSE JACK ADAPTER FITTING
1233 071026 132-120022-3 JACK PAD, MAIN LANDING GEAR
1234 100064 390-524063-0001 GUST LOCK, CONTROL
1235 210071 TE79-390NET/934-1 SAFETY NET, CABIN DOOR
1236 210072 K-2601 CABIN PRESSURIZATION ADAPTER
1237 240064 TDMC-90 LEAD ACID BATTERY CHARGER
1238 271060 KS5549 DIGITAL PROTRACTOR
1239 271061 390-524001-0001/917 RIG PIN SET
1240 280065 07-3005-6900 FUEL SAMPLEUNIT W/.125 HEX ADAPTER
1241 284061 390-000011/917-29 FUEL CALIBRATION HARNESS
1242 284062 390-100001/917-12 FUEL PROBE SELECTOR
1243 320090 3000 PSI GUAGE LARGE DIAL PRESSURE GAGES 0-3000 PSI +/- 1/2%
1244 322010 TK2092/917 LANDING GEAR PIN PULLER
1245 570092 TBD ALIGNMENT TOOL FOR L.E. RIB INSTALLATION (MYLAR DRAWING)
1246 570093 TBD ALIGNMENT TOOL FOR L.E. INSTALATION (MYLAR DRAWING)
1247 720108 TK2091/917 EXTENSION, STARTER- GENERATOR REMOVAL
1248 720109 TK2091/922 WRENCH, STARTER- GENERATOR REMOVAL
1249 720110 TK2240/939 ENGINE BLEED AIR BLANKING PLATE
1250 720111 08-0119-0800 ENGINE SLING
1251 720112 08-2021-0000 ENGINE STAND
1252 720113 K-2032 ADAPTERS, ENGINE STAND
1253 770052 101-380091-1/935 CALIBRATION ADAPTER TEST BOX (MEGGITT)
1254 330054 UBF93110-TU LIGHTING TEST UNIT
1255 770053 130-380042-1/935 CALIBRATION ADAPTER TEST BOX- MEGGITT
1256 770054 90-380034-1/935 CALITRATION ADAPTER TEST BOX- MEGGITT
1257 082051 No. 98 CALIBRATED SPIRIT LEVEL
2001 070057 117-590011-1 AIRPLANE HOISTING SLING, 350 MODEL
2003 070052 300 JACK, 3 POINT
2004 070053 35-590006 MAIN WHEEL AXLE JACK ADAPTER
2005 070054 35-590064-1 & 35-590067 AIRPLANE HOISTING SLING ASSY AND FITTINGS
2006 070055 400 w/ 60-590013 & 60-590013-1 JACK (DUKE ONLY)
2007 070056 45A99201-1 AIRPLANE HOIST
2008 070066 45A99475-1 WING HOIST
2009 070058 45A99515-1 H. STAB. HOIST
2010 070050 50-590148 3 CABLE SLING(90/A90/B90)
2011 070060 95-590017 AIRPLANE HOISTING SLING & ADAPTERS
2012 070059 99-590029-1 AIRPLANE HOISTING SLING
2013 070061 K-1073 JACK PAD KIT (ADAPTS JACK PADS TO TRONAIR
2014 070070 TK-1518 JACK ADAPTER OR EYEBOLT/BUSHING KIT
2015 070063 169-590014 JACK PADS (except 24R)
2016 090056 01-1179-0000 TOW BAR, PORTABLE(BEECHJET)
2017 090059 105-590013-1 MODEL 76 TOW BAR
2018 090051 169-590010-3 MODEL 23 TOW BAR
2019 090060 60-590014 TOW BAR - MODEL 60
2020 100056 50-590180-1 TAIL STAND ASSY.
2021 100054 101-590016-7 GUST LOCK CONTROL
2022 100058 114-590023-1 CONDENSER INLET COVER
2023 100063 114-590024-7 LH PITOT COVER
2024 100062 114-590024-8 RH PITOT COVER
2025 100061 114-590028-9 PROP SLING/EXH. COVER
2026 100060 114-590029-1 ENG. AIR INLET COVER
2027 100059 114-590038-1 MLG DOWNLOCK
2028 100051 114-590038-3 NLG DOWNLOCK
2029 100055 122-590011-21 GUST LOCK ASSY
2030 100053 122-590014-1 TIE DOWN RING (2)
2031 100052 122-590016-19 ENGINE INLET COVER
2032 100057 122-590016-3 PROP SLING
2033 120056 122-590015-1 FUEL SUMP DRAIN
2034 120051 TK 1729-4 DEFUEL KIT(REF. MM 12-10-00)
2035 200068 CA2210T-08 (& -10) RETAINING RING INSTALLATION TOOL(TRIDAIR)
2036 200052 06 7852 01 CONTACT CRIMPER
2037 200066 CA18185-10-T10 TO INSTALL CA18185
2038 200080 CA18185-10-T11 TO INSTALL CA18185
2039 200064 CA18185-10-T12 TO INSTALL CA18185
2040 200063 CA18185-10-T13 TO INSTALL CA18185
2041 200062 CAZ1062-08-T10 SPLIT RING INSTALLER
2042 200061 CP214C SQUEEZE
2043 200060 H7533 HANDLE - #8 OR #10 FASTENER
2044 200059 PBH-FCHF-DPYS-8-10CB DEUTSCHE PULLER KIT (HERNDON)
2045 200058 PTF 7533 YOKE ASSEMBLY
2046 200057 RB 6527-2 REMOVAL TOOL
2047 200056 T1819AY UNIVERSAL WRENCH
2048 210055 1222-36M MERCURY MANOMETER (TEST BENCH USE)
2051 210052 TK1794-5/939 ADAPTER PLATE
2052 210056 129-000000/939 SAFETY NET, FUSELAGE(1900D)
2053 240051 GPU150 AUXILIARY POWER UNIT 12/24 VOLT
2054 240052 D922-102-910001 ALTERNATOR DRIVE GEAR WRENCH (58P)
2055 260051 HB1278 HEATER PROBE JET CAL
2056 277051 122-590011-17 CONTROL LOCK
2057 300057 101-524887/934 TEST FIXTURE ELEC CLUTCH (LOCAL MANUFACTURE)
2058 300056 101-524887/935 TEST TOOL ELEC CLUTCH (LOCAL MANUFACTURE)
2059 270051 122-062009-35 SPANNER WRENCH (FWD WING)
2062 300051 XW20509 WIPER ARM TENSION ADJUSTMENT WRENCH
2063 320055 115-590023-1 MAIN STRUT EXTENSION LIMITER
2064 320058 115-590035 NOSE LANDING GEAR SHOCK STRUT LIMITER
2065 320054 169-810031 CODE 917 MAIN GEAR SHOCK DISC COMPRESSOR KIT
2067 320052 50-590019 BRAKE CYLINDER SPANNER WRENCH
2068 320056 LA4CR1000/NAS 1756-24 LANDING GEAR PINS (1) (NOSE L. GEAR LOCK)
2069 320087 LA4CR1500/NAS 1756-24 LANDING GEAR PINS (2) (MAIN L. GEAR LOCK)
2070 320059 LA7CR2500/NAS 1756-24 NOSE GEAR DOOR PIN
2071 320077 M400 TIRE SEALANT INJECTOR
2072 320060 MODEL 4005 HAND PRES. POT BLEEDER
2073 320061 TK229-1/939 MECHANICAL HYD PUMP(HYD GEAR ONLY)
2074 320062 TK229/939 HAND HYD PUMP(ALTERNATE-HYD GEAR ONLY)
2075 320063 TK889-2 D928 BLEEDER HOSE ADAPTER
2076 320068 114-380045/935 POWER STEERING BREAKOUT BOX (DECOTO, UC-UE)
2077 320065 114-380045/935-1 POWER STEERING BREAKOUT BOX (DECOTO, UC-UE)
2078 320057 API1549-3 POWER STEERING BREAKOUT BOX(AIRIGHT, UA/UB)(MM 32-
2079 320067 114-820000-939 CENTERING TOOL - NOSE GEAR STEER(DECOTA)
2080 320074 50-590078 LANDING GEAR CLUTCH WRENCH(MECH GEAR SYS)
2081 330052 581-901 BULB REPLACE TOOL, INDICATOR
2082 510056 MIA-2500 A. SCANNER
2083 510051 NDT-12 ULTRASONIC UNIT
2084 510052 RD-375 PROBE, ULTRASONIC
2085 510053 STO-3998 PROBE, A. SCANNER
2086 510057 TS 1469 TAP HAMMER
2087 520052 101-590053-1 CARGO DOOR CLOSING AID (CARGO DOOR ONLY)
2088 550074 TK2032 SPANNER WRENCH
2089 570075 122-620010/934-1 FREE PLAY TESTER
2090 570076 AS REQUIRED WING & FUSELAGE CRADLES OR EQUIVALENT
2091 570077 TS1187-1 WING BOLT WRENCHES (BONANZAS D1-D1501)
2092 570078 TS1195 WING BOLT WRENCH (BONANZAS D1-D1501)
2093 570079 TS1222-1 WING BOLT NUT SPIN ON WRENCHES 7/8" INT. WRENCH
2094 570091 TS1222-2 WING BOLT NUT SPIN ON WRENCHES 3/4" INT. WRENCH
2096 575054 810-2 96-524000 FLAP TRAVEL GAUGE (MODEL 58P/60)
2096 610060 B-842 PROP PISTON NUT WRENCH
2097 610059 LTC-3 TORQUE HANDLE(BEFORE AD 83-08-01)
2098 610058 SBH - 7/8 BOX HEAD
2099 610057 SBH - 9/16 BOX HEAD
2100 610056 TK1812-3 922 BOX HEAD (B100 PROPELLER BOLTS)
2103 610053 60-960000/D922 PROP BOLT TORQUE ADAPTER WRENCH
2104 610062 B5109 FEEDBACK RING PULLER (McCauley)
2105 610073 B5149 SPACER, FEEDBACK RING HOLDER(McCauley)
2106 720102 AS REQUIRED BOROSCOPE (OPTIONAL)
2107 720097 01-357-00 ENGINE DATA SIMULATOR
2108 720100 276084-1-1 TURBOCHARGER CONTROL TESTER
2109 720098 41 FILTER
2110 720082 50-000065-TC935 THERMOCOUPLE HARNESS - IAT
2111 720057 50-590158-25 ENGINE RIGGING TEMPLATE
2112 720084 50-590158-5 FEELER GAGE
2113 720055 50-910419-611 SUPERCHARGER INSTALL TOOL(EARLY 90'S)
2114 720052 65-590018 OIL DRAIN TUBE
2115 720051 50-590018 ENGINE SLING
2116 720053 93210091002-605 ENGINE SLING GARRETT
2117 720070 AS REQUIRED HOT OIL TANK CONTAINING OIL CPW202
2118 730051 AS REQUIRED FUEL TEST STAND W/ FLOW METER
2119 760052 35-590009 THROTTLE RETAINING NUT WRENCH
2120 760051 CPWA-32350A ENGINE INLET PROTECTIVE COVER
2121 760053 WT-107901 MAX N1 SHIM TOOL
2122 770051 CL23 CALIBRATOR/THERMOMETER
2123 210070 MODEL 913BB1AC TEMPERATURE BATH
2124 071027 02-7853-0100 MAIN GEAR HYDRAULIC JACK
2125 071028 01-1286-0000 PORTABLE TOWBAR
2126 071029 45A99147-1 JACK PAD, SINGLE MAIN GEAR
2127 275053 TE79-390BLDN/939 BLOW DOWN CHARGING TOOL
2128 230053 TS100 ULB PORTABLE TEST SET
2129 230054 9300A860 CVR TEST PANEL
2130 230055 17TES0200 CVR AUDIO MONITOR ADAPTER
2131 334001 FMG4400D FLASH MEASURING GUN
3001 070064 91-0504-0133 JACK (AXLE)
3002 070065 LOCAL PURCHASE PLUMB BOB
3003 080054 LOCAL PROCURE SPIRIT LEVEL, 18 INCH OR MORE
3004 080051 LOCAL PROCURE SCALE, 1 TO 5 THOUSAND LBS.
3005 080055 LOCAL PROCURE SCALE, 5 TO 15 THOUSAND LBS.
3006 090052 AS REQUIRED TOW TUG
3008 120059 AS REQUIRED LUBRICATING GUNS
3009 120052 AS REQUIRED COMPRESSED NITROGEN (2000 PSI) WITH REGULATOR VALVE
3010 120053 AS REQUIRED OXYGEN SERVICING EQUIPMENT
3011 120057 Z737 GREASE NOZZLE (NEEDLE TYPE)
3012 200055 105-10 HUCK BOLT SPLITTER
3013 200054 12350-032 HARVARD TRIP BALANCE, DOUBLE BEAM, OHAUS
3014 200053 169-810000-601, -602 CODE 703 LINE REAMER
3015 200094 6209B H.P. POWER SUPPLY
3016 200096 8060A FLUKE OHMMETER
3018 200108 AS REQUIRED ELECTRIC OR AIR HAND DRILLS
3019 200107 AS REQUIRED RIVET GUNS & SETS
3020 200106 AS REQUIRED SMALL SHEET METAL SHEARS-HAND TYPE
3021 200105 AS REQUIRED TUBE CUTTER & FLARING TOOLS-A/C TYPE
3022 200104 AS REQUIRED SET OF HAND TUBE BENDERS
3023 200103 AS REQUIRED CHERRY & CHERRY-LOCK RIVETING TOOLS
3024 200102 AS REQUIRED SIX TO TEN POWER MAGNIFYING GLASS
3025 200101 AS REQUIRED DYE PENETRANT INSPECTION EQUIPMENT
3026 200051 AS REQUIRED AIR PRESSURE SOURCE OF 9CFM/60PSI/0.1 H2O SEPARATOR
3027 200099 AS REQUIRED CONTROL SURFACE PAINTING SUPPORTS
3028 200065 AS REQUIRED PAINT GUNS (SUCTION TYPE) MINIMUM OF 2
3029 200098 AS REQUIRED HI LOK INSTALLATION TOOL
3030 200097 AS REQUIRED WORK BENCH & VISES
3031 200081 AS REQUIRED BENCH DRILL PRESS
3032 200095 AS REQUIRED BENCH GRINDER
3033 200110 AS REQUIRED CHAIN HOIST
3034 200093 AS REQUIRED SMALL SHEET METAL HAND BRAKE
3035 200092 AS REQUIRED VACUUM CLEANER
3036 200091 AS REQUIRED SMALL ROLL & BEADERS
3037 200090 AS REQUIRED ARC WELDING EQUIPMENT
3038 200089 AS REQUIRED EXHAUST FAN
3039 200088 AS REQUIRED PROTECTED AREA(75 DEG./DUST FREE/AIR FLOW)
3040 200111 AS REQUIRED HIGH PRESSURE WATER SOURCE
3041 200087 AS REQUIRED MAGNAFLUX EQUIPMENT - AVAILABLE
3042 200100 AS REQUIRED GAS WELDING EQUIPMENT
3043 200086 AS REQUIRED DYE PENETRANT INSPECTION EQUIPMENT
3044 200085 CTR-100-BNC-2 COAX CABLE TERM. CRIMP TOOL
3045 200084 HWP-12 JO-BOLT INSTALLATION TOOL
3046 200083 LOCAL PROCURE STRAP WRENCH
3047 200082 M81969/14 CONTACT INS/EXTRACT TOOL
3048 200109 NP45S BONDING BRUSH-PILOTED, STAINLESS STEEL
3049 210057 LOCAL PURCHASE GAP TOOL (WIRE)
3050 230051 4328A MILLIOHM METER (CAPABLE OF 3 MILLIOHM)
3051 260054 MS3191-03 CRIMPING TOOL
3052 260056 MS90455-1 INSERTION TOOL
3053 260055 MS90546-1 EXTRACTING TOOL
3054 270056 36D2844 BUBBLE PROTRACTOR
3055 280064 LOCAL PROCURE FIRE EXTINGUISHER, ABC TYPE
3056 284057 LOCAL PROCURE EXPLOSION PROOF LIGHT
3057 300054 JGA75X SPRAY GUN, DEVILBISS OR BINKS
3058 300055 NO 4 FORD CUP PAINT MIX CUP
3059 320088 14-4039-0000 TIRE BEAD BREAKER (MANUAL) & SAFETY CAGE
3060 320089 LOCAL PROCURE ULTRASONIC CLEANER
3061 330051 TK-1521 INSTRUMENT POST LIGHT WRENCH
3062 340054 1811-F-D PITOT STATIC TEST SET
3063 340058 ATC-600 DME RAMP TEST SET
3064 340052 ATC-601 TRANSPONDER RAMP TEST SET
3065 340051 NAV 401 VOR/ILS TESTER, RAMP
3066 390051 AS REQUIRED SOLDERING EQUIPMENT
3067 390052 AS REQUIRED TERMINAL INSTALLATION EQUIPMENT
3068 390053 AS REQUIRED WIRE STRIPPER
3069 570083 AS REQUIRED CONTROL SURFACE BALANCING EQUIPMENT
3070 720076 AS REQUIRED ENGINE CLEANING EQUIPMENT
3071 720064 AS REQUIRED SPARK PLUG CLEANING & GAPPING EQUIPMENT
3072 720063 AS REQUIRED ENGINE STAND - LYCOMING ENGINES OR/EQUIV.
3073 720062 AS REQUIRED ENGINE STAND - CONTINENTAL ENGINES/EQUIV.
3074 720075 AS REQUIRED VERTICAL ARBOR PRESS
3075 720065 AS REQUIRED VALVE SPRING COMPRESSOR
3076 720066 AS REQUIRED 1 TO 6" MICROMETER SET (OUTSIDE)"
3077 720068 AS REQUIRED 1 TO 6" MICROMETER SET (INSIDE)"
3078 720061 AS REQUIRED CONTINENTAL MOTORS TOOLS FOR CYLINDER REPL.
3079 720071 AS REQUIRED LYCOMING TOOLS FOR CYLINDER REPLACEMENT
3080 720072 AS REQUIRED DIAL INDICATOR
3081 720073 AS REQUIRED HELICOIL KIT AND TOOLS
3082 720074 BC-18 TIME-RITE
3083 720054 E2 DIFFERENTIAL COMPRESSION TESTER
3084 720069 E25 AND E50 TIMING DISCS & LIGHTS
3085 720067 81-111 DIAL INDICATOR
3086 720060 AS REQUIRED 0-1 DEPTH MICROMETER"
3087 720059 AS REQUIRED 0-9 OUTSIDE MICROMETER"
3088 720058 AS REQUIRED SET OF TORQUE WRENCHES (100, 1500,2500 IN/LBS
4001 090054 01-0543-0000 TOW BAR HEAD, DIAMOND/BEECHJET
4002 090053 01-1202-0000 MULTI HEAD TOW BAR
4003 350052 P4924-26H-01SA PURGE ADAPTER,O2
4004 570073 TS1176-1 WING BOLT NUT TORQUE ADAPTER 3/4" INT. WRENCH
4005 340053 TK1783-1/939 PITOT STATIC TESTER
5001 071009 25Y13A PAD, TAIL JACKING
5002 071011 25Y331A BOARD, PROFILE, LEFT WING (REQUIRES TRESTLE MET4210)
5003 071012 25Y332A BOARD, PROFILE, RIGHT WING (REQUIRES TRESTLE MET4210)
5004 071013 25Y535A BOARD, PROFILE, FORWARD FUSELAGE (REQUIRES TRESTLE MET4210)
5005 071010 25Y67A PAD, WING JACKING
5006 071002 ME7-2321C JACK, MAIN - WING
5007 071005 ME7-3242A JACK, MAIN - TAIL
5008 071007 ME7-4925 JACK, WHEEL CHANGE-BOTTLE
5009 071008 MET4210 TRESTLE, SUPPORT, USE W/ 25Y331,332 & 535
5010 082001 25Y21A BAR, TRANSVERSE LEVELLING
5011 082002 25Y23A BAR, FORE AND AFT LEVELLING
5012 082003 TB121 CLINOMETER
5013 091003 25-9Y31-1A TOWBAR
5014 101052 25-8Y47A PLUG, STATIC VENT
5015 101051 25Y197A PIN, MAIN U/C LOCKING
5016 101050 25Y33A PIN, NOSE U/C LOCKING
5017 121018 06-5022-6500 UNIT, HYDRAULIC & ENGINE OIL SERVICE
5018 120002 25Y1821-1A TOOL KIT, SERVICING TOOL KIT
5019 121007 25Y189A SPANNER, DE-ICING TANK CAPS
5020 121008 25Y635AB ADAPTER, FUEL DRAIN
5021 121019 AN8508-22 SPANNER, CROWS-FOOT, APU OIL FILLER CAP
5022 121003 NTG2604MSB GAUGE, TIRE PRESSURE
5023 231001 20127-2 EXTRACTOR, H.F.WIRE AERIALS
5024 231002 25Y1525 KEY, GRANGER STATIC DISCHARGER
5027 240009 BT51 TESTER, BONDING - 0 TO 20,000 MILLI-OHM
5028 240003 WB808-10UNF SPANNER, TERMINAL NUTS PRE-SET 22LB-IN.
5029 240004 WB808-1146 SPANNER, TERMINAL NUTS (9LBIN) 6-32 UNC.
5030 240005 WB808-1146B SPANNER, TERMINAL NUTS (6LBIN) 6-32 UNC
5031 240006 WB808-1246B SPANNER, TERMINAL NUTS (3.5LBIN) 4/40UNC
5032 240007 WB808-1346 SPANNER, TERMINAL NUTS(22LBIN) 10-32 UNF
5033 240001 WB808-4UNC SPANNER, TERMINAL NUTS (3.5LBIN)
5034 240002 WB808-6UNC SPANNER, TERMINAL NUTS (9LBIN)
5035 261002 21Y2577A ADAPTER, TORQUE LOADING - FIREWIRE COUP
5036 262002 6240-99-9951230 FILAMENT, SPARE FILAMENT FOR TS2E-13A
5037 261001 IT714 TONGS, HEATING - REAR BAY DETECTORS
5038 262001 TS2E13A ADAPTER, BOTTLE GONE INDICATOR
5039 271004 25-6Y1665A PLATE, AILERON RIGGING
5040 271001 25-6Y1729AB GAUGE, AILERON GEARED TAB
5041 270003 25-7Y15A PIN SET, RIGGING PIN SET
5042 271002 25-8Y109-1A EXTRACTOR, AILERON OUTER HINGE BOLTS
5043 274002 25-8Y11-1A BOARD, INCIDENCE - HORIZONTAL STAB.
5044 273001 25-8Y121-1A PROTRACTOR, STALL VANE
5045 271005 25-8Y35-1A PLATE, AILERON RIGGING
5046 270004 25-8Y59-1A SET, RIGGING PIN
5047 272004 25-8Y91-1A GAUGE, RUDDER MOVEMENT (REPLACES 25Y75A/B)
5048 272002 25-8Y97-1A GAUGE, RUDDER TRIM AND GEARED TAB (REPLACES 25Y1093)
5049 270005 25-9Y277-1A PIN SET, RIGGING PIN SET
5050 273005 25-9Y301-1A PLATE, ELEV. RIGGING-USE W/25-8Y11-1A
5051 273003 25-9Y85-1A CLIP, ELEVATOR COMPENSATOR
5052 274001 25Y195A BOARD, HORIZONTAL STABILIZER
5053 271003 25Y283AB PLATE, AILERON RIGGING
5054 270002 25Y493AB SET, RIGGING PIN
5055 273004 25Y73A PLATE, ELEV. RIGGING-USED W/ 25-8Y11-1A or 25Y195A
5056 275004 25Y831A PLATE, FLAP RIGGING
5057 270001 T5-2002-401-00 TENSIOMETER, CABLE
5058 284002 0208KAQ01 CABLE KIT, USE WITH 0602KQC03
5059 284003 0216KAQ01 CABLE KIT, USE WITH 0602KQC03
5060 284001 0602KQC03 TEST SET, FUEL INDICATING SYSTEM
5061 284004 0801KQC02 CABLE KIT, USE WITH 0602KQC03
5062 280001 25-9Y385-1A TOOL, FUEL SAMPLING (REPLACES 25Y1125AB OR 25-9Y215-1A)
5063 282002 25YTS303R17A ADAPTER, FUEL FLOW TEST-USE W/25YTS303R1A
5064 282001 25YTS303R1A ADAPTER, FUEL FLOW TEST
5065 282005 TSM4445F4F40SS HOSE, FLEXIBLE, USE W/ 25YTS303R1A & 25YTS303R17A
5066 291001 25Y1223 ADAPTER, TORQUE LOADING
5067 291003 BAEREF000003812 KIT, HYDRAULIC SYSTEM
5068 291002 FHQ100 TOOL, SEAL MANIPULATING
5069 290003 KHC1005 ADAPTERS, HYDRAULIC ADAPTER KIT FOR TRONAIR RIG
5070 308001 WB808-1680 INDICATOR, ICE DETECTOR TORQUE
5071 324026 25-9Y13-1A SPANNER, MAIN GEAR AXLE RETAINING NUT
5072 321007 25-9Y15-1A SPANNER, GLAND SEAL
5073 322003 25-9Y27-1A ADAPTER, OIL CHARGING MLG/NLG
5074 321010 25-9Y7-1 SPANNER, ORIFICE HEAD
5075 321002 25Y1491-31A CLAMP, MAIN LANDING GEAR DOOR JACK
5076 324002 25Y1817A TOOL, COMPRESSION, PARKING BRAKE SPRING STRUT
5077 321003 25Y1883-1A SPANNER, SIDE STAY RETAINING NUT (REPLACES 25Y259A)
5078 322001 25Y237A SPANNER, NOSE GEAR GLAND NUT
5079 322002 25Y239A SPANNER, NOSE GEAR AXLE RETAINING NUT
5080 324025 25Y249AB SPANNER, MAIN GEAR AXLE RETAINING NUT
5081 324027 25Y257A SPANNER, MAXARET RETAINING NUT
5082 321005 25Y261A SPANNER, SIDE STAY LOCATING PIN
5083 321006 25Y613AB SPANNER, MAIN GEAR GLAND NUT
5084 324028 25Y725A SPANNER, MAIN WHEEL NUT
5085 321008 25Y759A ADAPTER, OLEO OIL CHARGING
5086 121011 772BMK2 SET, INFLATION ADAPTER-LESS GAUGES
5087 324011 A0101795 GAUGE, TENON WEAR
5088 324012 A0107745 SPANNER, MAXARET HYDRAULIC COUPLING
5089 324013 A0109691 TOOL, MAXARET INSTALLATION/EXTRACT
5090 324014 A0115986 GAUGE, HEAT PACK WEAR
5091 324015 A0117370 GAUGE, HEAT PACK WEAR
5092 324036 A125529 TOOL, MAXARET INSTALLATION/EXTRACT
5093 324037 A11848 FIXTURE, BRAKE ROTOR ALIGNMENT
5094 324019 A11921 TOOL, BRAKE RESETTING
5095 324038 AM23911 TOOL, MODULATOR ALIGNMENT
5096 324032 AM24562 EXTRACTOR, MLG WHEEL DRIVE BLOCK
5097 324039 D755-1 MACHINE, WHEEL BALANCING
5098 324040 ESP2092 PUMP, OLEO HYD. REPLEN. RIG
5099 121018 FZ9-24-1500 GAUGE, INFLATION ADAPTER - 0-1500 PSI
5100 121019 FZ9-24-600 GAUGE, INFLATION ADAPTER - 0-600 PSI
5101 324005 SA30088 FIXTURE, BRAKE ROTOR ALIGNMENT (REPLACES AA1377)
5102 324021 SA30089 TOOL, BRAKE RESETTING, BRAKES IN-SITU (REPLACES A 16803)
5103 324017 SAM20084 GAUGE, HEAT PACK WEAR (EQUV. TO A0125601)
5106 341008 25Y-TS340E1A TEST SET, STALL IDENT MAINTENANCE CHECK
5107 341003 25YTS129R21A ADAPTER, STATIC VENT PLUG
5108 341004 25YTS129R23A BLANK, STATIC VENT
5109 341006 884FG ADAPTER, PRESSURE HEAD
5110 341009 CE2-40 KEY, CORRECTOR - SMITHS A2B COMPASS
5111 341001 WIDS107G ADAPTER, STALL VENT
5113 351002 BAEREF000003243 FLOWMETER, FOR CHECKING CREW OXYGEN MASK
5114 351003 R2-21A5 SEAL, USED W/ 510057, OXYGEN SYSTEM TEST
5115 490003 25-8Y215-1A STAND, A.P.U. (TURBOMACH)
5116 490001 25-8Y309-1A HOIST, A.P.U. (TURBOMACH)
5117 521001 25Y1555A KEY, WINDING - CABIN DOOR
5118 561001 ENG17099 BOLT, SLAVE BOLT FOR WINDSCREEN
5119 710016 08-0102-4000 SLING, ENGINE - USE WITH STAND PT. NO 08-2001-0000
5120 711003 08-2001-0000 STAND, USE W/ ADAPTER K2112 & SLING 08-0102-4010
5121 710011 25-9Y101-1A STAND, ENGINE LAYBY
5122 783001 25-9Y119-1A STAND, THRUST REVERSER
5123 710006 25-9Y43-1A SLING, ENG INSTALL/REMOVAL
5124 720006 289801-1B TOOL, SEAL INSTALLATION, LIP SEAL 3020052-5
5125 720007 289808-1 TOOL, SEAL REMOVAL, LIP SEAL 3020052-21
5126 720001 289816-1 CRANK, HAND - H.P. SPOOL
5128 732003 909932-5-1 TEST SET, ENGINE (TFE731-5)
5129 710018 K2112 ADAPTER, ENGINE - USE WITH STAND PT. NO 08-2001-0000
5130 780001 RSE1192 TOOL, STRAIGHT EDGE - RIGGING THRUST REVERSER
5131 780002 RSE1211 PIN, T/R GROUND LOCKOUT CONTROL VALVE
5132 780003 RSE1218 ADAPTER, THRUST REVERSER LATCH TEST
5133 710001 SPL3652 ADAPTER, TORQUE WRENCH, ALTNTR MOUNTING
5134 730001 25-7Y63A PIN, RIGGING, ENGINE FUEL CONTROL
5135 730002 25-7Y65A ADAPTER, RIGGING, ENGINE THROTTLE LEVER
6001 071023 25-8Y153-1A SLING, WING
6002 071021 25-9Y111-1A SLING, TAILPLANE
6003 071019 25-9Y217-1A SLING, FUSELAGE
6004 091001 25-6Y1647AB TOWBAR, (MOD. 253010B)
6005 091009 25-6Y1659 SHEAR-PIN, TURN (4 SUPPLIED WITH TOWBAR)
6006 091010 25-6Y1661 SHEAR-PIN, PUSH/PULL (4 SUP. WITH TOWBAR)
6007 091005 25-8Y77-1A ARM, STEERING (COLLAPSIBLE)
6008 091011 25-9Y41-1A PIN, SHEAR-PIN (4 SUPPLIED WITH TOWBAR)
6009 090001 RM601 TRACTOR, TUG
6010 101006 2-753A060 COVER, PRESSURE HEAD
6011 101042 21Y723B COVER, ICE DETECTOR
6012 101054 25-8Y211-1A COVER, COLD AIR UNIT EXHAUST
6013 101001 25Y1185A PLUG, WING STATIC SENSOR (STALL VENT)
6014 101041 25Y199AB COVER, NOSE WHEEL
6015 101040 25Y41AB COVER, MAINWHEEL
6016 101045 BCCH800-000-486 COVER, WINDSHIELD (OR BAEREF000003787)
6017 101057 JEC1510 BLANK, DORSAL INTAKE (OR P/N 25-6Y1675)
6018 101058 JEC1651 COVER, APU EXHAUST - GARRETT (OR 25-8Y259-1A)
6019 101059 JEC1652 COVER, APU INTAKE - GARRETT
6020 101060 JEC1653 COVER, APU GENERATOR COOLING - GARRETT
6021 121019 04-6150-5000 CRANE, UTILITY - REMOVAL OF HEAVY UNITS
6022 121020 OW1012 SPANNER, 5/16 X 3/8 WHITWORTH OPEN END
6026 121024 0W1822 SPANNER, 9/16 X 11/16 WHITWORTH OPEN
6028 121026 OW2832 SPANNER, 7/8 X 1" WHITWORTH OPEN ENDED
6030 121004 10-4036-0010 UNIT, TOILET SERVICING
6031 121028 1500P DRIVER, 1/4 HEX., TORQUE- SET DRIVE BITS
6032 121029 1550P DRIVER, 5/16 HEX (FOR TRIWING BITS)
6033 121030 212-1/4 DRIVER, TORQ-SET,1/4UNF X 1/4HEX DRIVE
6034 120005 25-7Y19AB KIT, GENERAL TOOL
6035 120001 25-8Y103-1A BRUSH, WINDSCREEN STATIC DISCHARGE
6036 120006 25-9Y123-1A KIT, TOOL SERVICING
6037 120031 25Y1121AB TOOLS, WING/STAB RETAINING RINGS
6038 120002 25Y1821-5A TOOL KIT, SERVICING TOOL KIT
6039 122009 25Y1889-1 DRIVER, HI-TORQUE-USE W/ DHS1421-D BOLTS
6041 121033 85JU10 KEY SET, BRISTOL KEY SET OF TEN
6042 121034 99-9008-6000 CHOCKS, NOSE
6043 121035 99-9015-6000 CHOCKS, MAIN
6044 122001 AVT300A WRENCH, TORQUE (40-300 LB/IN,3/8 SQ.)
6045 121036 BAEREF000007634 CYLINDER, OXYGEN REPLENISHMENT
6046 121037 BAEREF000007650 CYLINDER, NITROGEN REPLENISHMENT
6047 121038 BV45 TOOL BOX, ELECTROMECHANICAL TOOL BOX
6048 121039 CUAE10 TOOL KIT, LIGHT AIRCRAFT MAINTENANCE SET
6049 122005 HTS2 DRIVER, HI-TORQUE - ONE PIECE TOOL
6052 121005 K1044 COUPLING, TOILET SERVICING (FILL)
6053 121006 K2029 COUPLING, TOILET SERVICING (DUMP)
6054 121040 NA42265H2 TROLLEY, OXYGEN REPLENISHMENT - BOTTLES NOT SUPPLIED
6055 121041 NA42269-2 TROLLEY, NITROGEN REPLENISHMENT - BOTTLES NOT SUPPLIED
6056 121046 NB0075-1516 KIT, WINDOW CLEANING KIT
6057 121047 TW6AD DRIVE BIT, 5/16 HEX-1/4 TRIWING (W/S "C" PANEL)
6058 210001 15-7600-1000 UNIT, CABIN PRESSURIZATION
6059 210002 ARIES30 UNIT, AIR CONDITIONING
6060 210003 K1498 KIT, FOR CABIN PRESSURIZATION
6061 243001 04-6014-0010 HOIST, BATTERY - REMOVAL / INSTALLATION
6062 240010 6024A UNIT, POWER SUPPLY - 0- 60 VOLTS, 0-10 AMPS
6065 243010 CS2395FTS SPANNER, TORQUE-TERMINAL NUTS (21LBIN)
6066 240012 DHP801 OHMMETER, SAFETY (INCLUDES CHARGER) - LOW VOLTAGE FOR EXPLOSIVE SYSTEM USE
6067 240013 DHP8014 CASE, FOR DHP801
6068 243011 K2282 HOIST, BATTERY - LEAD ACID (REQUIRED FOR USE WITH 04-6014-0000)
6069 240014 MODEL825MK2 G.P.U., GROUND POWER UNIT - 2,000A OUTPUT
6070 240015 M0DEL825MK4 G.P.U., GROUND POWER UNIT - 2,000A OUTPUT
6071 240016 M806 METER, MULTI-METER
6072 243012 MB25 CHARGER, BATTERY CHARGER/ANALYZER
6073 240017 WM6 TESTER, INSULATION - 250 & 500 VOLT
6074 275005 25-8Y191-1A GAUGE, ASSEMBLY - FLAP RIGGING
6075 270006 25-9Y113-1A PIN SET, RIGGING PIN SET
6076 275001 25Y829A BOARD, WING INCIDENCE
6077 284007 242BTE CABLE, FOR USE WITH QAA
6078 282006 25-9Y115-1A EQUIPMENT, HANDLING - VENTRAL TANKS
6079 122012 25-9Y215-1A TOOL, FUEL SAMPLING (SEE 25-9Y385-1A)
6080 282007 25Y867A ADAPTER, FUEL TANK DRAIN
6081 284012 CE1 CABLE, FOR USE WITH QAA
6082 284011 CGA109 ADAPTER, FOR USE WITH QAA
6083 284009 CGA110 ADAPTER, FOR USE WITH QAA
6084 284006 CGA111 CABLE, FOR USE WITH QAA (700 SERIES 7001-20 ONLY)
6085 284008 QAA TESTSET, FUEL INDICATING SYSTEM
6086 282003 TS120R133A ADAPTER, VENTRAL TANK FUEL
6087 282004 TS120R141A ADAPTER, VENTRAL TANK FUEL FLOW CHECKS
6088 290006 05-3005-1100 TEST RIG, HYDRAULIC SYSTEM - 6GPM FLOW RATE (17% LESS FOR 50Hz MAINS)
6089 290011 05-7022-1100 TEST RIG, HYDRAULIC SYSTEM - 15GPM FLOW RATE (17% LESS FOR 50Hz MAINS)
6090 290010 AGS772 TOOL, PIPE FLARING (3/16"-1/2")
6091 290007 AGS773 TOOL, PIPE FLARING (5/8"- 1-1/4")
6092 291004 J6615ITEM2 EXPANDER, USE W/ AGS773 FLARING STAINLESS STEEL TUBE
6095 304001 25YTS31E5A TESTSET, WINDSCREEN GOLD FILM
6096 300002 T300-112A TOOL, CLENCHING, SIMPLIFIX DE-ICE COUPLINGS
6097 300001 T300-120A TOOL, CLENCHING, SIMPLIFIX DE-ICE COUPLINGS
6098 320001 125REF000000026 MACHINE, AUTOMATIC WHEEL CRACK DETECTOR
6099 321013 25-9Y11-1A SPANNER, RING NUT
6100 321016 25-9Y17-1A SPANNER, RING NUT OIL HEAD
6101 321018 25-9Y87-1A FIXTURE, HOLDING - MAIN U/C LEG
6102 321011 25-9Y9-1A SPANNER, FLUTTER GUIDE PLATE
6103 322009 25Y1319A FIXTURE, NOSE OLEO HOLDING
6104 322005 25Y1323 PIN, NOSE LEG OLEO ALIGNMENT
6105 322004 25Y1363A EXTRACTOR, LOCATOR NLG
6106 322006 25Y235A SPANNER, ORIFICE PLATE - NOSE LEG
6107 322007 25Y241A SPANNER, RET. NUT PRESSURE NLG
6108 324042 A0103065 PEG, PEENING (USE WITH AM21749-1)
6109 324043 A0106115 SPANNER, TORQUE (VALVE CORE)
6110 324018 A10444 MACHINE, TIRE REMOVAL
6111 324007 A11262 EXTRACTOR, MAIN WHEEL
6112 324020 A16803 TOOL, BRAKE RESETTING, IN-SITU
6113 324003 AA1377 FIXTURE, BRAKE ROTOR ALIGNMENT
6114 324006 AA1388 EXTRACTOR, MAIN WHEEL
6115 324037 AM20747 RING, PRESSURE, NOSE WHEEL-USE W/ A10444
6116 324041 AM20749 RING, PRESSURE, MAIN WHEEL-USE W/ A10444
6117 324009 AM21749-1 FIXTURE, BRAKE PAD RIVETING
6118 324029 AM23076 TOOL, LOADING/& EXTRACTION, BRAKE PISTON
6119 324030 AM23077 TOOL, CLAMPING PLATES, BRAKE STATOR
6120 324031 AM23104 DEVICE, LOAD CHECKING, PISTON/ LINER
6121 324038 BAEREF000007007 TEST BLOCK, FERROUS FOR USE WITH BR73
6122 324040 BAEREF000007008 TEST BLOCK, NON FERROUS FOR USE WITH BR73
6123 324039 BR73 DETECTOR, EDDY CURRENT CRACK
6124 320002 CCM150 WRENCH, TORQUE (10-150 LBFT)
6125 320004 DH344 SOCKET, 11/32AF X 1/4 SQ.DRIVE
6126 320005 FGK10 PROBE, KNIFE FERROUS (USE WITH BR73)
6127 320012 FT PROBE, PENCIL FERROUS (USE WITH BR73)
6128 320011 HB1625 SOCKET, NLG WHEEL AXLE NUTS - 1 5/8" AF x 3/4" DRIVE
6129 320010 HEADSETBR73 HEADSET, FOR BR73
6130 320009 MODEL4A FLYPRESS, STANDARD
6131 320008 NFK11 PROBE, KNIFE NON-FERROUS (WITH BR73)
6132 320007 NFT PROBE, PENCIL NON-FERROUS (WITH BR73)
6133 320003 QUICKSET DRIVER, TORQUE, 1-4 SQ DRIVE (CAPACITY 5-45 LBIN)
6134 324041 SA010321 GAUGE, PAD WEAR
6135 324008 SA30090 EXTRACTOR, MAIN WHEEL (REPLACES AA1388)
6136 320006 SSDRT1-2 HEAD, 1-2 IN SQUARE DRIVE RATCHET - FOR USE WITH CCM150
6137 341005 ADTS405F TEST SET, AIR DATA SYSTEM - PITOT STATIC
6138 341008 ATC600A TEST SET, TRANSPONDER/DME
6139 341007 NAV402AP TEST SET, MARKER/NAV/COMM
6140 121010 772D33858S ADAPTER, OXYGEN CHARGING, 3/8UNF-1/4BSP
6141 121001 M6380 ADAPTER, PORTABLE OXYGEN CHARGING 9/16UNF-1/4BSP
6142 121002 M6381 ADAPTER, PORTABLE OXYGEN CHARGING 9/16UNF-3/8UNF
6143 510002 25-8Y15-1A BOARD, HORIZONTAL STABILIZER DIHEDRAL
6144 510003 25Y19A BOARD, WING DIHEDRAL
6145 510001 25Y587A BOARD, HORIZONTAL STABILIZER DIHEDRAL
6146 521002 25Y1553A DRUM, TORQUE LOADING - ENTRY DOOR TENSATOR
6147 561002 W10-06-1 WRENCH, HEX-INTERNAL
6150 570001 25-8Y195-1A EXTRACTOR, WING/FUSELAGE DRAG SPIGOT
6151 570002 25-8Y197-1A SPACER, SET -WING/FUSELAGE DRAG SPIGOT
6152 273002 25-9Y79-1A JIG, SETTING - L.E. STALL TRIGGER
6153 710030 185-1 DRIVE-BIT, 3/32Hex X 1/4Hex DRIVE
6156 710027 212-1/4 DRIVE-BIT, TORQUE-SET (1/4UNF 1/4AF HEX DRIVE)
6157 710026 212-10 DRIVE-BIT, TORQUE-SET (10-32UNF 1/4AF HEX DRIVE)
6158 710025 212-4 DRIVE-BIT, TORQUE-SET (4-40UNC 1/4AF HEX DRIVE)
6161 710003 25-7Y9A SLING, ENGINE
6162 710004 25-8Y21-1A SLING, ENGINE INSTALLATION/REMOVAL
6163 783002 25-8Y261-1A SLING, DEE HOWARD THRUST REVERSER
6164 710017 25-8Y269-1A CRANE, ENGINE
6165 710007 25-9Y311-1A STAND, ENGINE LAYBY
6166 710021 298219-3 TEST BOX, J2 CONNECTOR
6167 710020 51-916718-1-1 BOX, BREAKOUT
6168 732002 909932-3-1 TEST SET, ENGINE (TFE731-3)
6169 710019 918352-1-1 CABLE, BREAKOUT BOX- USE W/ 51-916718-1-1
6170 710008 A0BA5525 STAND, TRANSPORTATION ENGINE
6171 710009 A0BA6052 STAND, TRANSPORTATION ENGINE
6172 711002 A0BA6452 STAND, THRUST REVERSERS
6173 710022 TMC105A DRIVE-BIT, 1/4 SQ DRIVE- 1/4" x 0.033" BLADE TIP
6174 711004 TOFBKIT125 ENDOPROBE, BASIC RIGID ENDOPROBE KIT
6175 732007 25-6YTS299E1A CABLE, TEST
6176 710005 25Y27A SLING, ENGINE
6177 710013 25YTS345E21-1A TEST SET, R.V.D.T. THRUST LEVEL
6178 732006 HDV2A METER, MILLIVOLTS
6179 732029 PE11026 BLEED PIPE, RATE RESET VALVE
6180 732030 PE15841 SPANNER, FUEL PUMP MOUNTING NUTS
6181 732031 PE16117 EXTRACTOR, BLOW OFF VALVE SLEEVE
6182 732032 PE1617 SPANNER, OIL TANK RELIEF VALVE
6183 732027 PE17207 ADAPTER, OIL PRESSURE FILTER PRIMING
6184 732020 PE17432 TOOL, TABBING GENERAL APPLICATION
6185 732009 PE17433 ADJUSTER, PRESSURE (P1) TO BLOW OFF VAL.
6186 732010 PE18599 SPANNER, ACCESSORY GEARBOX NUTS
6187 732011 PE18600 ADAPTER, MICRO PUMPS PRIMING
6188 732012 PE22712 DRAIN TOOL, OIL TANK
6189 732005 PE25368 BLEED TOOL, FUEL PUMP/L.P.FILTER
6190 732013 PE2621 RATCHET, USED WITH PE2617 OR PE28707
6191 732001 PE28707 SPANNER, IGNITER PLUG
6192 732014 PE3424 TOOL, ELECT.PLUG ADAPTERS (SIZE A)
6193 732015 PE4483 SYRINGE, GEARBOX PRIMING
6194 732008 PE4484 PIPE, GEARBOX PRIMING
6195 732017 PE4485 ADAPTER, GEARBOX PRIMING
6196 732022 PE4797 SPANNER, IDLE SPEED ADJUSTER
6197 732023 PE7390 SPANNER, OIL TANK CONNECTION
6198 732019 PE7483 TOOL, ELECT.PLUG ADAPTERS (SIZE Z)
6199 732025 PE7493 BLADE, EXHAUST CONE REMOVAL
6200 732018 PE8653 SOCKET, EXHAUST CONE REMOVAL
6201 732021 PE8709 SPANNER, DRAIN VALVE RETAINING NUT
6202 732004 PP322-1 POTENTIOMETER, D.C.
6203 732024 T2BJ1040SN SOCKET, EXHAUST CONE REMOVAL
6204 732016 T2BJ1326SN SOCKET, EXHAUST CONE REMOVAL
6205 732026 T2EC3022SN EXTENSION, EXHAUST CONE REMOVAL
6206 710014 25YTS345E19-1 CABLE- RVDT TEST
9701 720114 TL37321 GUAGE, IGNITOR 4 POLE
9702 720115 COMPUTER, LAPTOP LAP TOP COMPUTER
9703 720116 TL37102-102 TOOL, SHAFT STRETCH
9704 720117 TL37330 SOCKET, FUEL NOZZLE ADAPTER
9705 720118 TL37220 ADAPTER, TORQUE
9706 720119 TL37244 ENGINE ROTATION TOOL
9707 720120 TL37255 FITTING, OIL DRAIN
9708 720121 TL37253 MOUNT, ENGINE VIBRATION
9709 720122 TL37270 TORQUE ADAPTER GEAR BOX BREATHER VENT TUBE
9710 720123 TL99500 WRENCH, LP SHAFT FORWARD NUT
9711 720124 TL99501 PULLER ASSY., SPINNER PILOT PLATE
9712 720125 TL99502 PULLER ASSY., FAN
9713 720126 TL39454 TORQUE ADAPTER, FUEL DELTA P SWITCH
9714 720127 TL65047 PULLER, DRAIN TUBE
MASTER TOOL LIST
Series Reference Nomenclature Specification or Additional Data
PHOTOS AND An eclectic collection of tool

0 SKETCHES OF
REQUIRED TOOLS
photos, sketches and
scanned images to assist the
maintenance facility in
recognizing tools and
providing specifications for
alternate tooling. Listing by/in
ATA order.
Tool Picture
Series Description
1000 Beech Mandatory
2000 Beech Optional
3000 General Tools
4000 Discontinued
5000 Hawker Mandatory
6000 Hawker Optional
7000 Horizon Mandatory
8000 Horizon Optional
9000 Engines
Tool Manufacturer Qty.

Raytheon 0
Piston King Air Airliner Beechjet Premier Starship Hawker General Tools
X X X X X X X X
Tool Part Number ATA

.TOOL PICTURE CATALOG.
000000
MASTER TOOL LIST
3 CABLE Capable of 10,000 lbs. lift

2010 SLING(90/A90/B90) using three lift points found
on early 90 models (nose
and two wing locations plus
eyebolts)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

50-590148
070050
MASTER TOOL LIST
HOISTING EYE BOLT No substitute provided.

2002 Used with early model 90
and 100 series aircraft.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

18092
070051
MASTER TOOL LIST
JACK, 3 POINT Two 22" jacks plus a tail

2003 weight may be used as
alternate.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1

300
070052
MASTER TOOL LIST
MAIN WHEEL AXLE Recommended for use only

2004 JACK ADAPTER if jacks are not available
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

35-590006
070053
MASTER TOOL LIST
AIRPLANE HOISTING Sling to lift entire aircraft with

2005 SLING ASSY AND
FITTINGS
minimum damage. If aircraft
has damage, tools such as
air bags or padded slings
may also or alternately be
used. 10,000 lbs (4545 Kilo)
lift minimum.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

35-590064-1 & 35-590067
070054
MASTER TOOL LIST
JACK (DUKE ONLY) Alternate for standard jacks.

2006 Model 300 shown--Model
400 is similar yet longer.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

400 w/ 60-590013 & 60-590013-1
070055
MASTER TOOL LIST
AIRPLANE HOIST Capable of lifting 22,046 lbs.

2007 (10,000 Kilogram) when
attached at proper locations
with sling fittings
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

45A99201-1
070056
MASTER TOOL LIST
AIRPLANE HOISTING 33,000 lbs.(15,000 kilo) Lift

2001 SLING, 350 MODEL capable. Must have
spreader bar and staps
which circle fusilage at
fore/aft pressure bulkheads.
Wing tip ropes must be used
to stabilize.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

117-590011-1
070057
MASTER TOOL LIST
H. STAB. HOIST Capable of 551 lbs. (250

2009 kgs.) lift with three point
attachment
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

45A99515-1
070058
MASTER TOOL LIST
AIRPLANE HOISTING Capable of 33,000

2012 SLING lbs.(15,000 kilo) lift. Slings
incorporated at main
bulkheads, wing balance
ropes to be used.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1
X X X

99-590029-1
070059
MASTER TOOL LIST
AIRPLANE HOISTING Capable of 5,000 lbs.( 2273

2011 SLING & ADAPTERS kilo) lift. Two wing attach
and nose sling to lift.
Spreader bar must be used
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

95-590017
070060
MASTER TOOL LIST
JACK PAD KIT (ADAPTS Provided with Tronair jacks

2013 JACK PADS TO TRONAIR by Tronair. (Available upon
ordering.)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1

K-1073
070061
MASTER TOOL LIST
JACKS (3 REQUIRED 22 inch Closed,8" hyd ext, 8"

1001 FOR MODEL 60) mechanical. ext., 5 ton lift.
Any vendor may be used
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 2

02-0522-0140
070062
MASTER TOOL LIST
JACK PADS (except 24R) Moves jack point to allow

2015 gear access without
interference
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 2

169-590014
070063
MASTER TOOL LIST
JACK (AXLE) 2,000 lbs. (909 kilo) lift or

3001 greater recommended
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1

91-0504-0133
070064
MASTER TOOL LIST
PLUMB BOB 2-6 oz.(65-170 gram) Weight

3002
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Stanley 1
X X X X X X X

LOCAL PURCHASE
070065
MASTER TOOL LIST
WING HOIST Capable of 1,763 lbs. (800

2008 kgs.) lift with 4 point
attachment
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

45A99475-1
070066
MASTER TOOL LIST
JACK ADAPTER (3) Set supplied with aircraft

1009 loose equipment.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

122-100072-7
070067
MASTER TOOL LIST
JACK (KA 200 W/HIGH 32 inch closed, 22 hyd.

1003 FLOTATION GEAR,
STARSHIP NLG)
Ext.,8 mech ext., 5 ton lift
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 3
X X

02-0532-0110
070068
MASTER TOOL LIST
JACK 30 inch closed, 22 hyd.

1002 Ext.,8 mech ext, 5 ton lift
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 3
X X

02-0530-0110
070069
MASTER TOOL LIST
JACK ADAPTER OR Used for proper attachment

2014 EYEBOLT/BUSHING KIT on aircraft at aft spar/tail
area. Alternate unit (same
part number) is one piece w
intregal bushing/eye bolt.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

TK-1518
070070
MASTER TOOL LIST
HYDRAULIC AIRCRAFT 36 inch closed, 22 hyd. Ext,

1004 JACK 8 mech. Ext., 5 ton lift
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 2
X X X

02-0536-0110
070071
MASTER TOOL LIST
JACK 44 inch closed, 22 hyd ext., 8

1005 mech ext, 5 ton lift
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1

02-0544-0110
070072
MASTER TOOL LIST
JACKING STABILIZATION Extension to 72 inch,

1006 TAIL STAND adjustable downward to 30
inch. Any vendor may be
used
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1
X X X

03-4006-0000
070073
MASTER TOOL LIST
JACK PAD KIT Consists of 2 each -11 and

1008 one -21 unit. Used up
through RK113.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

045A-99225-01
070074
MASTER TOOL LIST
TAIL SUPPORT Short adjustable unit. One

1010 ASSEMBLY W/WEIGHT end is retained by weights,
other end fits clevis of tail.
Attached prior to jacking,
adjustable to accommodate
approx. 8 to 10 inch of
adjustment in one inch
increments
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

35-590021
070075
MASTER TOOL LIST
JACKING STABILIZATION Extension to 44 inch,

1007 TAIL STAND adjustable at least 10 inch
downward. Any vendor may
be used. Sample unit shown
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1

03-4033-0000
070076
MASTER TOOL LIST
JACK, MAIN - WING Closed 23 in., extended 44

5006 inch, 7 ton lift capacity.,
alternate vendors allowed.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Mingay Engineering 2

ME7-2321C
071002
MASTER TOOL LIST
JACK, MAIN - TAIL Closed 32 in., extended 74

5007 inch, 7 ton lift capacity.,
Alternate vendors allowed.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines


ME7-3242A
071005
MASTER TOOL LIST
JACK, WHEEL CHANGE- Closed 4.12 in., extended

5008 BOTTLE 9.32 inch, 7 ton lift capacity.,
Alternate vendors allowed.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines


ME7-4925
071007
MASTER TOOL LIST
TRESTLE, SUPPORT, Local made trestles or two

5009 USE W/ 25Y331,332 & 535 jacks with "U" channel head
adapters(local made) may be
used.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines


MET4210
071008
MASTER TOOL LIST
PAD, TAIL JACKING No alternate provided

5001
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25Y13A
071009
MASTER TOOL LIST
PAD, WING JACKING No alternate provided

5005
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25Y67A
071010
MASTER TOOL LIST
BOARD, PROFILE, LEFT 63x9x3 size. Wood board.

5002 WING (REQUIRES
TRESTLE MET4210)
Local manufacture with
shaping/padding allowed.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25Y331A
071011
MASTER TOOL LIST
BOARD, PROFILE, 63x9x3 size. Wood board.

5003 RIGHT WING (REQUIRES
TRESTLE MET4210)
shaping/ padding allowed.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25Y332A
071012
MASTER TOOL LIST
BOARD, PROFILE, 60x16x3 size. Wood board.

5004 FORWARD FUSELAGE
(REQUIRES TRESTLE
shaping/ padding allowed.
MET4210)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25Y535A
071013
MASTER TOOL LIST
SLING, FUSELAGE 4 point frame/belt sling with

6003 33,000 lbs.(15,000 kilo)
Minimum lift. Local
manufacture is not
recommended but may be
used in emergencies. For
salvage lifting of fuselage
only.
Example unit shown.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25-9Y217-1A
071019
MASTER TOOL LIST
SLING, TAILPLANE 2 frame, single lift bar sling

6002 with 10,000 lbs.(4550 kilo)
Minimum lift. Local
manufacture is not
used in emergencies.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25-9Y111-1A
071021
MASTER TOOL LIST
SLING, WING 4 point frame sling with

6001 10,000 lbs. (4550 kilo)
Minimum lift. Local
manufacture is not
used in emergencies.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25-8Y153-1A
071023
MASTER TOOL LIST
JACKING STABILIZATION Closed 54 inch (137cm),

1231 TAIL STAND max height 77 inch(196cm).
Any unit adjustable to within
these parameters is
acceptable.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1

03-5800-0010
071024
MASTER TOOL LIST
NOSE JACK ADAPTER No substitute provided. Unit

1232 FITTING used with (bolted onto) a
02-0536-0100 Tronair jack.
Unit is not adaptable to other
jacks. Weight of jack part of
tool function. P/N subject to
revision.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

TK1814/932-3ASSYB
071025
MASTER TOOL LIST
JACK PAD, MAIN No substitute provided

1233 LANDING GEAR
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 2

132-120022-3
071026
MASTER TOOL LIST
MAIN GEAR HYDRAULIC 5 Ton jack. 5.5 inch (14cm)

2124 JACK closed, 17 inch (43cm) at full
extention
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 2

02-7853-0100
071027
MASTER TOOL LIST
PORTABLE TOWBAR No alternate given. Other

2125 tow bars with exchangable
heads may be used when
verified that they will function
on the Premier and are of
sufficient strength.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1

01-1286-0000
071028
MASTER TOOL LIST
JACK PAD, SINGLE MAIN No alternate given. To be

2126 GEAR used when afull jack at jack
point is not available. Care
with insertion of this unit is
greatly advised.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1
X X

45A99147-1
071029
MASTER TOOL LIST
SCALE, 1 TO 5 Electronic weight scales- 1 to

3004 THOUSAND LBS. 5 thousand lbs. lift, +/- 1%
scale accuracy
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Starrett 1
X X X

LOCAL PROCURE
080051
MASTER TOOL LIST
PLUMB BOB (SMALL) 2 to 6 oz. (65 to 170 grams)

1013 Plumb bob, pointed. Any
vendor may be used. String
attaches to top of bob
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Craftsman 1

LOCAL PROCURE
080052
MASTER TOOL LIST
PLUMB BOB SUPPORT No alternate specified.

1012 Screws into level point to
hold plumb bob used to level
aircraft on door sill
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

114-590025-1
080053
MASTER TOOL LIST
SPIRIT LEVEL, 18 INCH Local procured level, any

3003 OR MORE manufacture. (50cm base)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Craftsman 1
X X X X X X

LOCAL PROCURE
080054
MASTER TOOL LIST
SCALE, 5 TO 15 Weighting scales,

3005 THOUSAND LBS. mechanical or electronic, 5
to 15 thousand lbs.
Capable, +/- 1% scale
accuracy
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Starrett 1
X X X X

LOCAL PROCURE
080055
MASTER TOOL LIST
TIE DOWN RING May be in aircraft loose

1011 equipment or installed on
wings
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

122-590014-1
080056
MASTER TOOL LIST
BAR, TRANSVERSE 20.3x1.9x0.8 inch bar for use

5010 LEVELLING with clinometer.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25Y21A
082001
MASTER TOOL LIST
BAR, FORE AND AFT 63x1.9x0.8 inch bar for use

5011 LEVELLING with clinometer.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25Y23A
082002
MASTER TOOL LIST
CLINOMETER Any clinometer with main

5012 axis leveling may be used
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Rank Taylor Hobson 1

TB121
082003
MASTER TOOL LIST
CALIBRATED SPIRIT Calabrated unit 6 to 18 inch

1257 LEVEL length (15 to 48 cm) as
required. Any vendor
acceptable. +/-.1 degree
calibration
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Starrett 1

No. 98
082051
MASTER TOOL LIST
TRACTOR, TUG Various tug tractors exist and

6009 any may be used with the
appropriate attachments, tow
bars and braking ability for
weight of aircraft being
towed. Sample unit shown.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Unk 1

RM601
090001
MASTER TOOL LIST
MODEL 23 TOW BAR Positioning tow bar.

2018 Alternate attachment bars
may be used.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

169-590010-3
090051
MASTER TOOL LIST
TOW TUG Ramp towing tug, approved

3006 for pull of up to 10 ton (9100
kilo) recommended.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Clark 1
X X X X X X X X

AS REQUIRED
090052
MASTER TOOL LIST
MULTI HEAD TOW BAR Individual units may be used

4002 if all models are covered.
Multi head units call for
procurment of various heads
as appropriate to aircraft
towed.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1

01-1202-0000
090053
MASTER TOOL LIST
TOW BAR HEAD, Alternate multihead unit may

4001 DIAMOND/BEECHJET be used if approved by
vendor for particular aircraft
model.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1

01-0543-0000
090054
MASTER TOOL LIST
TOW BAR(BEECHJET & Multi-head tow bar with

1015 PREMIER) Beechjet attachment head is
an acceptable substitute.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1
X X

45A91715-1
090055
MASTER TOOL LIST
TOW BAR, Tow bar for minor positioning

2016 PORTABLE(BEECHJET) in hangar/ tie-down area.
(Multi head bar
recommended for ramp
towing.)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1

01-1179-0000
090056
MASTER TOOL LIST
TRACTOR TOW BAR 33, Local procured or

1014 35, 55 & 95 manufactured units with
ability to tow 4 ton (8000
lbs.--3650 kilo) aircraft
acceptable.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

45-590075
090057
MASTER TOOL LIST
TRACTOR TOW BAR 80-90 inch length(2-2.3

1016 meter), attachment head
designed for King Air/
Starship usage Multi head
tow bar acceptable. Any
vendor may be used. Ramp
movement use. Sample unit
shown.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1
X X X

01-1109-0000
090058
MASTER TOOL LIST
MODEL 76 TOW BAR Positioning tow bar. Alternate

2017 attachment bars may be
used.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

105-590013-1
090059
MASTER TOOL LIST
TOW BAR - MODEL 60 Positioning tow bar. Alternate

2019 units may be used.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

60-590014
090060
MASTER TOOL LIST
TOWBAR, (MOD. Tronair or other manufacture

6004 253010B) tow bars with appropriate
designed heads may be
used in lieu of this tow bar.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25-6Y1647AB
091001
MASTER TOOL LIST
TOWBAR Tronair multihead tow bar

5013 with 01-0502-0000 head may
be used
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25-9Y31-1A
091003
MASTER TOOL LIST
ARM, STEERING Hand steered tow bar.

6007 (COLLAPSIBLE) Alternate vendor tow bars
may be used. For ground
positioning only.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25-8Y77-1A
091005
MASTER TOOL LIST
SHEAR-PIN, TURN (4 Use with 25-6Y1647AB or 25-

6005 SUPPLIED WITH
TOWBAR)
8Y75-49A tow bars.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 2

25-6Y1659
091009
MASTER TOOL LIST
SHEAR-PIN, PUSH/PULL Use with 25-6Y1647AB or 25-

6006 (4 SUP. WITH TOWBAR) 8Y75-49A tow bars.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 2

25-6Y1661
091010
MASTER TOOL LIST
PIN, SHEAR-PIN (4 Use with the 25-9Y31-1A

6008 SUPPLIED WITH
TOWBAR)
tractor tow bar
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 2

25-9Y41-1A
091011
MASTER TOOL LIST
NLG DOWNLOCK Loose equipment

2028
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

114-590038-3
100051
MASTER TOOL LIST
ENGINE INLET COVER Loose equipment

2031
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 2

122-590016-19
100052
MASTER TOOL LIST
TIE DOWN RING (2) Loose equipment

2030
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 2

122-590014-1
100053
MASTER TOOL LIST
GUST LOCK CONTROL Loose equipment

2021
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

101-590016-7
100054
MASTER TOOL LIST
GUST LOCK ASSY Loose equipment

2029
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

122-590011-21
100055
MASTER TOOL LIST
TAIL STAND ASSY. Adjustable height tail stand

2020
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

50-590180-1
100056
MASTER TOOL LIST
PROP SLING Loose equipment

2032
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 2

122-590016-3
100057
MASTER TOOL LIST
CONDENSER INLET Loose equipment

2022 COVER
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

114-590023-1
100058
MASTER TOOL LIST
MLG DOWNLOCK Loose equipment

2027
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

114-590038-1
100059
MASTER TOOL LIST
ENG. AIR INLET COVER Loose equipment

2026
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 2

114-590029-1
100060
MASTER TOOL LIST
PROP SLING/EXH. Loose equipment

2025 COVER
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 2

114-590028-9
100061
MASTER TOOL LIST
RH PITOT COVER Loose equipment

2024
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1
X X

114-590024-8
100062
MASTER TOOL LIST
LH PITOT COVER Loose equipment

2023
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1
X X

114-590024-7
100063
MASTER TOOL LIST
GUST LOCK, CONTROL No substitute provided, loose

1234 equipment
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

390-524063-0001
100064
MASTER TOOL LIST
PLUG, WING STATIC Loose equipment supplied

6013 SENSOR (STALL VENT)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 2

25Y1185A
101001
MASTER TOOL LIST
COVER, PRESSURE 25Y1727 is alternate

6010 HEAD
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Rosemount Limited 2

2-753A060
101006
MASTER TOOL LIST
COVER, MAINWHEEL Prevents FOD/ exposure on

6015 ground
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 4

25Y41AB
101040
MASTER TOOL LIST
COVER, NOSE WHEEL Prevents FOD/ exposure on

6014 ground
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 2

25Y199AB
101041
MASTER TOOL LIST
COVER, ICE DETECTOR No replacement noted

6011
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

21Y723B
101042
MASTER TOOL LIST
COVER, WINDSHIELD Prevents FOD on ground

6016 (OR BAEREF000003787)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

BCCH800-000-486
101045
MASTER TOOL LIST
PIN, NOSE U/C LOCKING Loose equipment. No

5016 alternate offered
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25Y33A
101050
MASTER TOOL LIST
PIN, MAIN U/C LOCKING Loose equipment. No

5015 alternate offered
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 2

25Y197A
101051
MASTER TOOL LIST
PLUG, STATIC VENT No alternate offered

5014
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25-8Y47A
101052
MASTER TOOL LIST
COVER, COLD AIR UNIT 800-1000 loose equipment.

6012 EXHAUST FOD protection
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25-8Y211-1A
101054
MASTER TOOL LIST
BLANK, DORSAL Loose equipment. Prevents

6017 INTAKE (OR P/N 25-
6Y1675)
FOD
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

John E. Clarke & Co. 1

JEC1510
101057
MASTER TOOL LIST
COVER, APU EXHAUST - 25-8Y259-1A may be used.

6018 GARRETT (OR 25-8Y259-
1A)
FOD protection.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines


JEC1651
101058
MASTER TOOL LIST
COVER, APU INTAKE - No replacement noted.

6019 GARRETT FOD Protection.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines


JEC1652
101059
MASTER TOOL LIST
COVER, APU Prevents FOD. No

6020 GENERATOR COOLING -
GARRETT
replacement noted
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines


JEC1653
101060
MASTER TOOL LIST
BRUSH, WINDSCREEN No alternate given. Alternate

6035 STATIC DISCHARGE grounding wands are
available from various
vendors but are not specified
in this listing.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25-8Y103-1A
120001
MASTER TOOL LIST
TOOL KIT, SERVICING Kit is usable on other models

6038 TOOL KIT with variations. Compare
individual tool listing to
convert or modify.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25Y1821-5A
120002
MASTER TOOL LIST
TOOL KIT, SERVICING Tool kit for 1 through 400

5018 TOOL KIT models. All BS (British
Standard) spanners as well
as other tools are in kit. See
manual 125-1/1000 for
Breakdown of components.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25Y1821-1A
120002
MASTER TOOL LIST
KIT, GENERAL TOOL Kit is usable on other models

6034 with variations. Compare
convert or modify.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25-7Y19AB
120005
MASTER TOOL LIST
KIT, TOOL SERVICING Kit is usable on other models

6036 with variations. Compare
convert or modify.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25-9Y123-1A
120006
MASTER TOOL LIST
TOOLS, WING/STAB No alternate noted

6037 RETAINING RINGS
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25Y1121AB
120031
MASTER TOOL LIST
DEFUEL KIT(REF. MM 12- Local procured as needed.

2034 10-00) Alternate defuel means are
permitted as appropriate
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

TK 1729-4
120051
MASTER TOOL LIST
COMPRESSED Local procured Nitrogen

3009 NITROGEN (2000 PSI)
WITH REGULATOR
bottle and regulator
VALVE
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Scott 1
X X X X X X X X

AS REQUIRED
120052
MASTER TOOL LIST
OXYGEN SERVICING Tronair oxygen cart

3010 EQUIPMENT (shown)is acceptable (12-
3104-0000 with K2129
regulator and adapter.)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Puritan-Bennett 1
X X X X X X X X

AS REQUIRED
120053
MASTER TOOL LIST
GREASE NOZZLE, Any alternate brands,

1021 ALEMITE equivalent function nozzles
acceptable. In-service unit
mounted to hose attachment
shown.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Alemite 1

314150
120054
MASTER TOOL LIST
CRANE - BOOM HEIGHT Down height 120 inch,

1017 AT LEAST 12 FT. extend up to 170 inch
(300/435 cm), 2 ton (4000
lbs.-1820 kilo) lift. Any
vendor may be used
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1
X X X X X

04-6150-5000
120055
MASTER TOOL LIST
FUEL SUMP DRAIN Loose equipment. Applies for

2033 use on NC-4 to NC-25 only.
May be locally manufactured.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

122-590015-1
120056
MASTER TOOL LIST
GREASE NOZZLE For use with flush fittings.

3011 (NEEDLE TYPE) Alternate vendors acceptable
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Alemite 1
X X X X X X X X

Z737
120057
MASTER TOOL LIST
WRENCH - SUMP DRAIN Aircraft loose equipment.

1018
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1
X X X

50-590106
120058
MASTER TOOL LIST
LUBRICATING GUNS Manual or air operated

3008 lubrication units are
acceptable. Air operated
units should have pressure
regulation option installed.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Allied Tech-tronics 1
X X X X X X X X

AS REQUIRED
120059
MASTER TOOL LIST
OXYGEN SERVICE For servicing attachment

3007 ADAPTER between Oxygen service cart
and aircraft system.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Puritan-Bennett 1
X X X X X X X X

173784
120060
MASTER TOOL LIST
FUEL SUMP DRAIN Aircraft loose equipment.

1020 WRENCH Applies from NC-4 to NC-25
only. May be local
manufacture.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

122-590015-1
120061
MASTER TOOL LIST
O2 SYSTEM TEST Alternate local construction

1019 EQUIPMENT in KA Comm. 99-001, page
8/9 (Issued 1999). Local
produced unit is acceptable
substitute
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1
X X X X

TK1738-6/939-2
120062
MASTER TOOL LIST
ADAPTER, PORTABLE 9/16 UNF male with 1/4 BSP

6141 OXYGEN CHARGING
9/16UNF-1/4BSP
female adapter (for use with
the ZAP650 portable O2
cylinder)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

M.E.L. 1

M6380
121001
MASTER TOOL LIST
ADAPTER, PORTABLE 9/16 UNF male with 3/8 BSP

6142 OXYGEN CHARGING
9/16UNF-3/8UNF
female adapter (for use with
the ZAP650 portable O2
cylinder)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

M.E.L. 1

M6381
121002
MASTER TOOL LIST
GAUGE, TIRE PRESSURE Tire gauge minimum range

5022 of 0 to 260 psi, oil filled
gauge recommended.
Tronair 0-300 PSI gauge
shown.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

NTG2604MSB
121003
MASTER TOOL LIST
UNIT, TOILET SERVICING Various vendor units for

6030 servicing lavatory exist.
Connect must be appropriate
for aircraft (Example: K2029
coupling)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1

10-4036-0010
121004
MASTER TOOL LIST
COUPLING, TOILET For use with Tronair

6052 SERVICING (FILL) Lavatory service cart
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1

K1044
121005
MASTER TOOL LIST
COUPLING, TOILET For use to attach 125's to

6053 SERVICING (DUMP) Lavatory service cart.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1

K2029
121006
MASTER TOOL LIST
SPANNER, DE-ICING No alternate noted

5019 TANK CAPS
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25Y189A
121007
MASTER TOOL LIST
ADAPTER, FUEL DRAIN No alternate provided, hoses

5020 may be local procurred to
various lengths.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25Y635AB
121008
MASTER TOOL LIST
ADAPTER, OXYGEN 3/8 UNF female to 1/4 BSP

6140 CHARGING, 3/8UNF-
1/4BSP
male adapter. Previous
772D33858 may be used.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Puritan-Bennett 1

772D33858S
121010
MASTER TOOL LIST
SET, INFLATION Alternate gauged units to

5086 ADAPTER-LESS GAUGES 600 PSI and 1500 PSI may
be utilized (Nitrogen
charging.)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Earby Light Eng. 1

772BMK2
121011
MASTER TOOL LIST
UNIT, HYDRAULIC & 2 gallon reservoir, 75 psi

5017 ENGINE OIL SERVICE max. pressure, for Mil-H-
5606 or Mil-L-23699.
Separate units shall be used
for Hyd and Oil.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 2

06-5022-6500
121018
MASTER TOOL LIST
GAUGE, INFLATION Gauge is oil damped, +/- 2%,

5099 ADAPTER - 0-1500 PSI 1-1500 PSI range.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Britool Limited 1

FZ9-24-1500
121018
MASTER TOOL LIST
CRANE, UTILITY - Similar in function to 25-

6021 REMOVAL OF HEAVY
UNITS
8Y269-1A (Crane, engine
lifting) May interchange.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1

04-6150-5000
121019
MASTER TOOL LIST
GAUGE, INFLATION Gauge is oil damped, +/- 2%,

5100 ADAPTER - 0-600 PSI 1-600 PSI range.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Britool Limited 1

FZ9-24-600
121019
MASTER TOOL LIST
SPANNER, CROWS- Any manufacture acceptable,

5021 FOOT, APU OIL FILLER
CAP
1 3/8" size, 1/2" drive
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Snap-on 1

AN8508-22
121019
MASTER TOOL LIST
SPANNER, 5/16 X 3/8 Set shown in picture, Various

6022 WHITWORTH OPEN
END
vendors acceptable
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Whitworth 1

OW1012
121020
MASTER TOOL LIST
SPANNER, 3/8 X 7/16 Set shown in picture.

6023 WHITWORTH OPEN
END
Various vendors acceptable
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Whitworth 1

OW1214
121021
MASTER TOOL LIST
SPANNER, 7/16 X 1/2 Set shown in picture Various

6024 WHITWORTH OPEN
END
vendors acceptable
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Whitworth 1

OW1416
121022
MASTER TOOL LIST

6025 WHITWORTH OPEN
END
vendors acceptable
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Whitworth 1

OW1820
121023
MASTER TOOL LIST

6026 WHITWORTH OPEN vendors acceptable
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Whitworth 1

0W1822
121024
MASTER TOOL LIST

6027 WHITWORTH OPEN
END
vendors acceptable
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Whitworth 1

OW2022
121025
MASTER TOOL LIST
SPANNER, 7/8 X 1" Set shown in picture Various

6028 WHITWORTH OPEN
ENDED
vendors acceptable
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Whitworth 1

OW2832
121026
MASTER TOOL LIST

6029 WHITWORTH OPEN
END
vendors acceptable
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Whitworth 1

OW810
121027
MASTER TOOL LIST
DRIVER, 1/4 HEX., Various vendors offer this

6031 TORQUE- SET DRIVE
BITS
tool. They are acceptable
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Snap-on 1

1500P
121028
MASTER TOOL LIST
DRIVER, 5/16 HEX (FOR Various vendors offer this

6032 TRIWING BITS) tool. They are acceptable
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Snap-on 1

1550P
121029
MASTER TOOL LIST
DRIVER, TORQ- Various vendors offer this

6033 SET,1/4UNF X 1/4HEX
DRIVE
tool. They are acceptable
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Snap-on 1

212-1/4
121030
MASTER TOOL LIST
STAGING, ACCESS FOR No replacement noted

6040 COMPLETE AIRCRAFT
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

851011
121032
MASTER TOOL LIST
KEY SET, BRISTOL KEY No alternative shown

6041 SET OF TEN
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

85JU10
121033
MASTER TOOL LIST
CHOCKS, NOSE Local made chocks (Wood,

6042 rubber or metal) may be
used to secure aircraft in
static position
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1

99-9008-6000
121034
MASTER TOOL LIST
CHOCKS, MAIN Local made chocks (Wood,

6043 rubber or metal) may be
used to secure aircraft in
static position
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1

99-9015-6000
121035
MASTER TOOL LIST
CYLINDER, OXYGEN Tronair (or other like

6045 REPLENISHMENT manufactures) oxygen carts
with bottles meeting local
regulatory requirements may
be used (DOT bootles
appropriate tested and
maintained)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

BAEREF000007634
121036
MASTER TOOL LIST
CYLINDER, NITROGEN Tronair (or other like

6046 REPLENISHMENT manufactures) nitrogen carts
with bottles meeting local
regulatory requirements may
be used
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

BAEREF000007650
121037
MASTER TOOL LIST
TOOL BOX, Contains various tools which

6047 ELECTROMECHANICAL
TOOL BOX
may be purchased
individually from Britool or
other equivalent vendors.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Britool 1

BV45
121038
MASTER TOOL LIST
TOOL KIT, LIGHT Contains various tools which

6048 AIRCRAFT
MAINTENANCE SET
may be purchased
individually from Britool or
other equivalent vendors.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Britool 1

CUAE10
121039
MASTER TOOL LIST
TROLLEY, OXYGEN Alternate cart from Tronair

6054 REPLENISHMENT -
BOTTLES NOT SUPPLIED
(12-3104-0000) is
acceptable.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1

NA42265H2
121040
MASTER TOOL LIST
TROLLEY, NITROGEN Alternate cart from Tronair

6055 REPLENISHMENT -
BOTTLES NOT SUPPLIED
(12-3104-0000) is
acceptable.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1

NA42269-2
121041
MASTER TOOL LIST
KIT, WINDOW CLEANING Alternate window cleaning

6056 KIT material may be used if
approved.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

NB0075-1516
121046
MASTER TOOL LIST
DRIVE BIT, 5/16 HEX-1/4 5/16 HEX-1/4 Triwing, any

6057 TRIWING (W/S "C"
PANEL)
vendor may be used
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Britool 1

TW6AD
121047
MASTER TOOL LIST
WRENCH, TORQUE (40- Snap-On and other

6044 300 LB/IN,3/8 SQ.) manufactures may be used if
the units measure the noted
40 to 300 inch pounds with a
3/8" square drive.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Britool 1

AVT300A
122001
MASTER TOOL LIST
DRIVER, HI-TORQUE - For 8 UNC bolts with Hi-

6049 ONE PIECE TOOL torque recess heads.
Alternate vendors may be
used.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Unbrako Limited 1

HTS2
122005
MASTER TOOL LIST
DRIVER, HI-TORQUE - For 10 UNF bolts with Hi-

used.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Unbrako Limited 1

HTS3
122006
MASTER TOOL LIST
DRIVER, HI-TORQUE - For 1/4 UNF bolts with Hi-

used.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Unbrako Limited 1

HTS4
122007
MASTER TOOL LIST
DRIVER, HI-TORQUE- Used with DHS1421-D

6039 USE W/ DHS1421-D
BOLTS
bolts. Y4928 previous tool is
acceptable only if this tool is
not available
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25Y1889-1
122009
MASTER TOOL LIST
TOOL, FUEL SAMPLING 25-9Y385-1A preferred. (ID

6079 (SEE 25-9Y385-1A) by clear glass)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25-9Y215-1A
122012
MASTER TOOL LIST
AIR PRESSURE SOURCE Any manufactures air

3026 OF 9CFM/60PSI/0.1 H2O
SEPARATOR
pressure machine meeting
stated minimum in tool call
out is acceptable. Units must
have water separator
function.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Craftsman 1
X X X X X X X X

AS REQUIRED
200051
MASTER TOOL LIST
CONTACT CRIMPER DMC units equate

2036
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Fairchild 1

06 7852 01
200052
MASTER TOOL LIST
LINE REAMER No substitute noted

3014
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1
X X

169-810000-601, -602 CODE 703
200053
MASTER TOOL LIST
HARVARD TRIP Electronic scales to 0.001

3013 BALANCE, DOUBLE
BEAM, OHAUS
accuracy is acceptable
substitute.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

VWR Scientific 1
X X X X X X X X

12350-032
200054
MASTER TOOL LIST
HUCK BOLT SPLITTER No substitute noted

3012
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Huck 1

105-10
200055
MASTER TOOL LIST
UNIVERSAL WRENCH Old style fastener tools for

2047 wing leading edge.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Fairchild 1

T1819AY
200056
MASTER TOOL LIST
REMOVAL TOOL Old style fastener tools for

Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Fairchild 1

RB 6527-2
200057
MASTER TOOL LIST
YOKE ASSEMBLY Old style fastener tools for

Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Fairchild 1

PTF 7533
200058
MASTER TOOL LIST
DEUTSCHE PULLER KIT Old style fastener tools for

2044 (HERNDON) wing leading edge.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Fairchild 1

PBH-FCHF-DPYS-8-10CB
200059
MASTER TOOL LIST
HANDLE - #8 OR #10 Old style fastener tools for

2043 FASTENER wing leading edge.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Fairchild 1

H7533
200060
MASTER TOOL LIST
SQUEEZE Old style fastener tools for

Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Fairchild 1

CP214C
200061
MASTER TOOL LIST
SPLIT RING INSTALLER Old style fastener tools for

Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Fairchild 1

CAZ1062-08-T10
200062
MASTER TOOL LIST
TO INSTALL CA18185 Old style fastener tools for

Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Fairchild 1

CA18185-10-T13
200063
MASTER TOOL LIST

Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Fairchild 1

CA18185-10-T12
200064
MASTER TOOL LIST
PAINT GUNS (SUCTION Paint guns with regulators

3028 TYPE) MINIMUM OF 2 and appropriate spray
nozzles may be used.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Binks 2
X X

AS REQUIRED
200065
MASTER TOOL LIST

Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Fairchild 1

CA18185-10-T10
200066
MASTER TOOL LIST
STATIC STATION, Static grounding pad and

3017 PORTABLE 3M wrist grounding strap.
Vendor optional
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Minnesota Mining & 1
Mfg.

8501
200067
MASTER TOOL LIST
RETAINING RING Used for early style Tridair

2035 INSTALLATION
TOOL(TRIDAIR)
fasteners on Wing leading
edge, new type fasteners
and tools replace.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Fairchild 1

CA2210T-08 (& -10)
200068
MASTER TOOL LIST
M.O.V. TEST BOX Local manufacture per

1032 Starship MM. ( Alternate is
replacement of MOV (Metal
Oxide Varistors))
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

TK2209-935
200069
MASTER TOOL LIST
DIGITAL LOW Accurate at .1 micro-ohms,

1031 RESISTANCE
OHMMETER (BIDDLE
range .1 micro-ohm to 60
ohms.(Note: .1 Micro-ohm =
TESTER) .0000001 ohm.30 foot
vendor supplied cables used
with unit. Any vendor may be
used but must meet
resistance requirements)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1
X X

TK2146/935-2
200070
MASTER TOOL LIST
CORROSION Dow 9 or Dow 19 equivalent

1030 TREATMENT FOR
MAGNESIUM
formulation. (Refer to KA
90/100 comm. 7 or 23 for
local manufactured method
and formula (CrRO3 &
CaSO4)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1
X X X X

LOCAL PROCUREMENT
200071
MASTER TOOL LIST
MULTIMETER, FLUKE Any portable meter capable

1029 of reading value of 1.0 ohm
and greater resistance is
acceptable as alternate.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Fluke 1

MODEL 77
200072
MASTER TOOL LIST
ULTRAVIOLET Calibrated photo light meter

1028 IRRADIANCE TESTER (Calibrated in lumens), 50 to
200 lumens acceptable
alternate.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

UVP, INC 1
X X X X X

UVX RADIOMETER
200073
MASTER TOOL LIST
FLUORESCENT Equivalent Branded FPI sets

1027 PENETRANT
INSPECTION KIT
are authorized if meeting
Commercial/ Military
requirements for NDT(non
destructive testing)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Magnaflux Corp. 1
X X X X X

14798 KIT
200074
MASTER TOOL LIST
TEST BLOCK, Certified crack plates, OEM

1026 FLUORESCENT
PENETRANT
(i.e., Magnaflux or Mil-STD)
are considered as
acceptable alternative
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Nat. Bureau of 1
Standards
X X X

SRM 1850
200075
MASTER TOOL LIST
EDDY CURRENT TESTER Any certified Eddy Current

1025 w/BNC probe connection
capability. ED530 OR
ED530M are acceptable
alternate units.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Magnaflux 1
Corp./Centurion NDT
X X

ED 520
200076
MASTER TOOL LIST
EDDY CURRENT TEST Any properly sensitive

1024 PROBES probes with correct split
diameter or flat use designs
as required for position (BNC
connections). Must work with
Magnaflux or other eddy
current equipment used.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Ideal Manufacturing 1
X X

6200-3/16 BH-BNC (&-1/4)
200077
MASTER TOOL LIST
EDDY CURRENT RAC manufactured- no

1023 CALIBRATION TEST
BLOCK
substitute. Test piece for
compliance with the SIRM
inspection on King
Airs/ 99 Airliner. No
calibration required of tool.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1
X X

131387
200078
MASTER TOOL LIST
WORK STAND - B5 TYPE 7-11 foot extension range,

1022 500 lbs. lift capability. Any
vendor may be used.
Sample unit shown.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1
X X X X X

04-6012-1100
200079
MASTER TOOL LIST

Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Fairchild 1

CA18185-10-T11
200080
MASTER TOOL LIST
BENCH DRILL PRESS As required, various vendors.

3031
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Mitaka 1
X X X X X X X X

AS REQUIRED
200081
MASTER TOOL LIST
CONTACT INS/EXTRACT As required, various vendors.

3047 TOOL
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Daniels DMC 1
X X X X X X X

M81969/14
200082
MASTER TOOL LIST
STRAP WRENCH As required, various vendors.

3046
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Snap-on 1

LOCAL PROCURE
200083
MASTER TOOL LIST
JO-BOLT INSTALLATION No alternate noted

3045 TOOL
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Lok-Fast, Inc. 1

HWP-12
200084
MASTER TOOL LIST
COAX CABLE TERM. No alternate noted, however,

3044 CRIMP TOOL alternate suppliers may exist
and may be utilized if able to
properly crimp.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Daniels DMC 1
X X X X X X X

CTR-100-BNC-2
200085
MASTER TOOL LIST
DYE PENETRANT As required, various vendors.

3043 INSPECTION
EQUIPMENT
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Dye-Check 1
X X X X X X X

AS REQUIRED
200086
MASTER TOOL LIST
MAGNAFLUX No alternates noted.

3041 EQUIPMENT - AVAILABLE
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Magnaflux Corp. 1

AS REQUIRED
200087
MASTER TOOL LIST
PROTECTED AREA(75 Plastic curtained area may

3039 DEG./DUST FREE/AIR
FLOW)
be used if meeting local
approvals.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Local 1

AS REQUIRED
200088
MASTER TOOL LIST
EXHAUST FAN As required, various vendors.

3038
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Vornado 1

AS REQUIRED
200089
MASTER TOOL LIST
ARC WELDING As required, various vendors.

3037 EQUIPMENT
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Lincoln 1

AS REQUIRED
200090
MASTER TOOL LIST
SMALL ROLL & BEADERS As required, various vendors.

3036
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Chicago Pneumatic 1
X X

AS REQUIRED
200091
MASTER TOOL LIST
VACUUM CLEANER As required, various vendors.

3035
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Black & Decker 1
X X X X X X X X

AS REQUIRED
200092
MASTER TOOL LIST
SMALL SHEET METAL As required, various vendors.

3034 HAND BRAKE
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Betenbender 1
X X X X X X X X

AS REQUIRED
200093
MASTER TOOL LIST
H.P. POWER SUPPLY DC power supply, 0 to

3015 32vdc. 10amp recommended
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Hewlett-Packard 1
X X X X X X X X

6209B
200094
MASTER TOOL LIST
BENCH GRINDER As required, various vendors.

3032
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Craftsman 1
X X X X X X X X

AS REQUIRED
200095
MASTER TOOL LIST
OHMMETER Electronic full range

3016 ohmmeter for bench use,
Alternate supplier units
acceptable.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Fluke 1
X X X X X X X X

8060A FLUKE
200096
MASTER TOOL LIST
WORK BENCH & VISES As required, various vendors.

3030
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Craftsman 1
X X X X X X X X

AS REQUIRED
200097
MASTER TOOL LIST
HI LOK INSTALLATION No alternates noted

3029 TOOL
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Hi-Lok 1

AS REQUIRED
200098
MASTER TOOL LIST
CONTROL SURFACE Local manufactured supports

3027 PAINTING SUPPORTS or, in commonly, hanging
supports may be used as
required.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Snap-on 1
X X X X X X X X

AS REQUIRED
200099
MASTER TOOL LIST
GAS WELDING As required, various vendors.

3042 EQUIPMENT
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Lincoln 1
X X X X X X

AS REQUIRED
200100
MASTER TOOL LIST
DYE PENETRANT No recommended alternate

3025 INSPECTION
EQUIPMENT
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Dye-Check 1
X X X X X X X X

AS REQUIRED
200101
MASTER TOOL LIST
SIX TO TEN POWER Any manufacture magnifier

3024 MAGNIFYING GLASS or loop may be utilized if
meeting power requirement.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Bosch & Lomb 1
X X X X X X X X

AS REQUIRED
200102
MASTER TOOL LIST
CHERRY & CHERRY- Vendor sets recommended.

3023 LOCK RIVETING TOOLS Alternate manufacture
pullers acceptable if verified
for pulling Cherry rivets.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Cherry 1
X X X X X X X X

AS REQUIRED
200103
MASTER TOOL LIST
SET OF HAND TUBE 1/4, 5/16/and 3/8 inch

3022 BENDERS benders. Lever type
recommended, for
aluminum, copper and mild
steel.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Imperial Eastman 1
X X X X X X X X

AS REQUIRED
200104
MASTER TOOL LIST
TUBE CUTTER & Aircraft tubing flare/double

3021 FLARING TOOLS-A/C
TYPE
flaring tool with appropriate
cutter/reamer
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Imperial Eastman 1
X X X X X X X X

AS REQUIRED
200105
MASTER TOOL LIST
SMALL SHEET METAL Metal shear for standard 4x8

3020 SHEARS-HAND TYPE foot aluminum sheets
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Betenbender 1
X X X X X X X X

AS REQUIRED
200106
MASTER TOOL LIST
RIVET GUNS & SETS Pneumatic rivet gun, 2X, 3X,

3019 4X and assorted sets.
Vendors various.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Chicago Pneumatic 1
X X X X X X X X

AS REQUIRED
200107
MASTER TOOL LIST
ELECTRIC OR AIR HAND 1/4 or 3/8 inch drill chuck,

3018 DRILLS variable speed drill for metal
work.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Black & Decker 1
X X X X X X X X

AS REQUIRED
200108
MASTER TOOL LIST
BONDING BRUSH- As required, various

3048 PILOTED, STAINLESS
STEEL
vendors. Bond Brushes are
available in various
diameters for various size
applications.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Anderson Corp. 1
X X X X X X X

NP45S
200109
MASTER TOOL LIST
CHAIN HOIST As required, various vendors

3033 Maximum lifting load must
be clearly noted on hoist.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Toyota 1
X X X X X X X X

AS REQUIRED
200110
MASTER TOOL LIST
HIGH PRESSURE As required, various vendors.

3040 WATER SOURCE
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1
X X X X X X X X

AS REQUIRED
200111
MASTER TOOL LIST
UNIT, CABIN Higher air flow units may be

6058 PRESSURIZATION utilized (7602 or 7603
models in example) 7600
model is 10 HP, 0-12 PSI
Differential, 0-200 ACFM air
flow.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1

15-7600-1000
210001
MASTER TOOL LIST
UNIT, AIR CONDITIONING Ground operation cooling

6059 unit. Various local procured
units with venting of outflow
from aircraft may be used
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Aries 1

ARIES30
210002
MASTER TOOL LIST
KIT, FOR CABIN K2610 shown (Hawker)

6060 PRESSURIZATION
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1

K1498
210003
MASTER TOOL LIST
FLOW CONTROL VALVE Rental unit may be available

1042 TEST BOX directly from OEM. No
alternate tool noted for this
item.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Airborne 1

1E30-2
210051
MASTER TOOL LIST
ADAPTER PLATE Tronair K1285 is preferred

2051 alternate
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

TK1794-5/939
210052
MASTER TOOL LIST
ANGLE GAUGE (SD-5 Compressor angle to level

2050 AIR COND.
COMPRESSOR TOOL)
reference for oil filling. Any
angle/level gauge which fits
attachment lugs may be
used.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Sankyo 1
X X

32448
210053
MASTER TOOL LIST
DIP STICK (SD-5 AIR Oil check may be made

2049 COND. COMPRESSOR
TOOL)
locally if increment
measurement is given by
vendor. (Ref. Overhaul
manual of vendor)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Sankyo 1
X X

32447
210054
MASTER TOOL LIST
MERCURY MANOMETER Not recommended outside of

2048 (TEST BENCH USE) test lab setting due to
mercury in unit.. Water or
pressure sensitive units may
be used where appropriate.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Dwyer 1
X X

1222-36M
210055
MASTER TOOL LIST
SAFETY NET, No alternate. (cargo nets do

2052 FUSELAGE(1900D) not secure windows)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

129-000000/939
210056
MASTER TOOL LIST
GAP TOOL (WIRE) As required, various vendors.

3049
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Snap-on 1
X X

LOCAL PURCHASE
210057
MASTER TOOL LIST
SAFETY BELT, CARGO No designated alternate.

1045 DOOR (1900D) Two 4" straps- 24,000 lbs.
tensile strength min., 252"
length with buckles.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

97-000000/939-2
210058
MASTER TOOL LIST
CABIN TEMPERATURE Local manufacture per KA

1043 CONTROLLER MM, ATA 21
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1
X X

LOCAL MANUFACTURE
210059
MASTER TOOL LIST
WATER MANOMETER Local manufacture per

1041 (FOR A/C USE) illustrations in KA 200 MM.
Unit should allow for +/- 6
inch of Water measurement.
Any vendor may be used.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Dwyer 1
X X X

1211-8W
210060
MASTER TOOL LIST
SAFETY BELT, CABIN Unit as shown in Service

1040 DOOR (King Air) news letter dated March 3,
1978 acceptable, 129-
000000 may be substituted.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1
X X X X X

97-000000/939-1
210061
MASTER TOOL LIST
SAFETY NET, CABIN 97-000000 with 3 foot

1039 DOOR(1900D) extensions to attachment
straps may be used. Original
129- unit is preferred unit.
Photo shows net 97-000000
(ref. 1040)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

129-000000/939-1
210062
MASTER TOOL LIST
KING AIR Local manufactured, .125"

1038 PRESSURIZATION
ADAPTER KIT
AL plate minimum, with
adapter for pressurization
hose and/ or valve bleed air
attach.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1
X X

K1285
210063
MASTER TOOL LIST
GROUND 0-12 PSI Recommended, (at

1037 PRESSURIZATION
BLOWER,200CFM @ 12
least 10 psi required), 0-200
ACFM. Regulated system.
PSI MIN. Kitco or other vendor units
meeting above requirement
may be used. Any vendor
may be used
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1
X X X X X X

15-7602-1000
210064
MASTER TOOL LIST
AIR COND. SERVICING R134a recycle/servicing unit

1036 EQUIP.-CHARGING /W
VACUUM(R134)
w/ filtering. Dual use units
(R12/R134a) acceptable.
Example Robinair 34800-2K
or 12-12134a.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Robinair 1
X X X X X

17600B
210065
MASTER TOOL LIST
REFRIGERANT LEAK Detector capable of

1035 DETECTION SYSTEM
FOR R12/R134a
detection of CFC's,HCFC's
and HFC's including R12 and
R134a. Any vendor may be
used. Example TIF 5650
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Robinair 1
X X X X X X

16500
210066
MASTER TOOL LIST
AIR COND. SERVICING Approved equipment for R12

1034 EQUIP.-CHARGING /W
VACUUM, R12
servicing/recycling.
Combination equipment for
R12 and R134a may be
used with proper
adapters/storage tanks.
Example is Robinair 34800-
2K or 12-12134a
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Robinair 1
X X X X

10975
210067
MASTER TOOL LIST
THERMISTOR VACUUM Termistor capable to a

1033 GAGE (MEASURES IN
MICRONS) R12
vacuum of 50 microns.
Previous 10974 unit is
acceptable. Unit adaptable
for R134a use also.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Robinair 1
X X X X

012-14830
210068
MASTER TOOL LIST
JANITROL HEATER Assorted adjustable plugs

1044 PRESSURE TESTER and pressure regulator to
apply pressure internally
acceptable. Any vendor may
be used . C&D 70100 Heater
decay Tester shown
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

C & D Airmotive 1
Products
X X

PDT286B
210069
MASTER TOOL LIST
TEMPERATURE BATH 90 +/- 1 degree F. and 42 +/-

2123 1 degree F.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Rosemount 1

MODEL 913BB1AC
210070
MASTER TOOL LIST
SAFETY NET, CABIN No substitute provided

1235 DOOR
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

TE79-390NET/934-1
210071
MASTER TOOL LIST
CABIN No substitute provided

1236 PRESSURIZATION
ADAPTER
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1

K-2601
210072
MASTER TOOL LIST
MILLIOHM METER Any certifiable milliohm

3050 (CAPABLE OF 3
MILLIOHM)
meter may be utilized. If
meeting 3 milliohm ability.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Hewlett-Packard 1
X X X X X X X

4328A
230051
MASTER TOOL LIST
MEGOHMMETER Certified megohmmeter of

1046 any manufacture is
acceptable. Barfield 2471F
shown. Any vendor may be
used
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Hewlett-Packard 1
X X X X

MODEL 2850
230052
MASTER TOOL LIST
ULB PORTABLE TEST No alternate given

2128 SET
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

DuKane Corp. 1
X X X

TS100
230053
MASTER TOOL LIST
CVR TEST PANEL No alternate given

2129
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Fairchild Aviation 1
Record
X X X

9300A860
230054
MASTER TOOL LIST
CVR AUDIO MONITOR No alternate given

2130 ADAPTER
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Fairchild Aviation 1
Record
X X X

17TES0200
230055
MASTER TOOL LIST
EXTRACTOR, H.F.WIRE No alternate noted

5023 AERIALS
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

20127-2
231001
MASTER TOOL LIST
KEY, GRANGER STATIC No alternate offered.

5024 DISCHARGER Granger Allen Wrench tool
16500 (shown) may be
utilized when appropriate.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25Y1525
231002
MASTER TOOL LIST
MAINTENANCE No alternate approved. Used

1047 TERMINAL
SOFTWARE(NOISE
to adjust/maintain noise
suppression system.
SUPPR.) Software available through
Raytheon Aircraft.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Elliott- Moline 1

19B99500
238051
MASTER TOOL LIST
SPANNER, TERMINAL Torque load to 3.5 lbf.in.

5033 NUTS (3.5LBIN) Alternate 41762-211-0
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

WB808-4UNC
240001
MASTER TOOL LIST
SPANNER, TERMINAL Torque load to 9 lbf.in.

5034 NUTS (9LBIN) Alternate 41762-221-0
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

WB808-6UNC
240002
MASTER TOOL LIST

5028 NUTS PRE-SET 22LB-
IN.
Alternate 41762-241-0
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

WB808-10UNF
240003
MASTER TOOL LIST

5029 NUTS (9LBIN) 6-32 UNC. Alternate 41762-421-0 or
41762-422-0 (short shaft)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

WB808-1146
240004
MASTER TOOL LIST

5030 NUTS (6LBIN) 6-32 UNC Alternate 41762-423-0
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

WB808-1146B
240005
MASTER TOOL LIST

5031 NUTS (3.5LBIN) 4/40UNC Alternate 41762-411-0 or
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

WB808-1246B
240006
MASTER TOOL LIST

5032 NUTS(22LBIN) 10-32 UNF Alternate 41762-441-0 or
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

WB808-1346
240007
MASTER TOOL LIST
GAUGE, BATTERY No alternate offered

5025 TERMINAL GO/NO-GO
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Elcon 1

029
240008
MASTER TOOL LIST
TESTER, BONDING - 0 Any DLRO, 0 to 20,000 Milli-

5027 TO 20,000 MILLI-OHM ohm minimum..
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Biddle Mfg.. 1

BT51
240009
MASTER TOOL LIST
UNIT, POWER SUPPLY - Various vendors. Variable

6062 0- 60 VOLTS, 0-10 AMPS Power supply 0-60 Volt, 0-10
Amp load.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Hewlett-Packard 1

6024A
240010
MASTER TOOL LIST
UNIT, GROUND Hobart or other

6064 POWER - 28V WITH
1100A LIMITER AND
manufactures units
acceptable with 28V (26-
CAPABLE OF 1500A 32V), 1500 Amp Start and
OUTPUT 1100 continuous Amperage
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

778
240011
MASTER TOOL LIST
OHMMETER, SAFETY Fluke 29, 79 and 76 series

6066 (INCLUDES CHARGER) -
LOW VOLTAGE FOR
Ohmmeters are acceptable
alternate.
EXPLOSIVE SYSTEM USE
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

DHP801
240012
MASTER TOOL LIST
CASE, FOR DHP801 No replacement noted.

6067 Used with DPH801 only.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

DHP8014
240013
MASTER TOOL LIST
G.P.U., GROUND Hobart GPU600 series is

6069 POWER UNIT - 2,000A
OUTPUT
equivalent
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Hobart 1

MODEL825MK2
240014
MASTER TOOL LIST
G.P.U., GROUND Hobart GPU600 series is

6070 POWER UNIT - 2,000A
OUTPUT
equivalent
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Hobart 1

M0DEL825MK4
240015
MASTER TOOL LIST
METER, MULTI-METER Various Fluke and/or Hewlett

6071 Packard Units are readily
available and can replace
this general multimeter
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Unk 1

M806
240016
MASTER TOOL LIST
TESTER, INSULATION - No replacement/alternate

6073 250 & 500 VOLT noted.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Unk 1

WM6
240017
MASTER TOOL LIST
AUXILIARY POWER UNIT Any larger units (more than

2053 12/24 VOLT 150 amp) may be used as
long as units are regulated
and have 12/24 volt ability.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Hobart 1

GPU150
240051
MASTER TOOL LIST
ALTERNATOR DRIVE Burroughs makes alternate

2054 GEAR WRENCH (58P) gear retention wrenches.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

D922-102-910001
240052
MASTER TOOL LIST
VOLTAGE REGULATOR Other approved type

1052 TESTING EQUIPMENT equipment (test benches)
are acceptable for testing.
647 Support Systems Inc.
shown.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Eastern Electronics 1

E100
240053
MASTER TOOL LIST
BATTERY MONITOR Construction shown in

1057 FUNCTIONAL TEST appropriate MM. Acceptable
alternate.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1
X X X

LOCAL MANUFACTURE
240054
MASTER TOOL LIST
GENERATOR CONTROL Local manufacture per MM,

1056 TEST UNIT(BREAKOUT
BOX)
ATA 24 for acceptable
alternate
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1
X X X

TK1999/935
240055
MASTER TOOL LIST
BATTERY Ni-Cad battery charger/deep

1055 TESTING/CHARGING
EQUIPMENT(NI-CAD)
cycle analyzer, any
manufacture
Christie Superseder II shown.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Christie Electric 1
X X X X X

RF80H
240056
MASTER TOOL LIST
EXTERNAL POWER 0-32 volt DC, 400 amp

1053 UNIT 24 VOLT/300
CONTINUOUS
continuous, 1000 amp start,
any manufacture
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Hobart 1
X X X X X X

GPU400
240057
MASTER TOOL LIST
VARIABLE POWER Certified variable voltage up

1051 SUPPLY to 36 VDC, two amp to five
amp rated
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Hewlett-Packard 1

DRC40-40B
240058
MASTER TOOL LIST
BATTERY CHARGER, Regulated trickle charge

1050 JET ELEC BAT PACK units may be utilized if
meeting manufactures test
requirements(Ref. 24-30-02
of PS-835 CMM, page 5-5
for Local Manufacture of test
unit)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

J.E.T. 1
X X X X

BC-815A
240059
MASTER TOOL LIST
BATTERY TESTING AND 24 volt charger for lead acid-

1049 CHARGING
EQUIPMENT(LEAD ACID)
any manufacture. Trickle
charge method preferred
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Christie Electric 1

AS REQUIRED
240060
MASTER TOOL LIST
UNIVERSAL BREAKOUT Optional for Beechjet.

1048 BOX AND CABLES(RK2 &
AFTER)
Collins 50 pin breakout box
may be used for some tests
calling for this unit.
Attachment/ accessory
Cables are model/connector
specific.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

JC Air 1
X X

01-0314-02
240061
MASTER TOOL LIST
GROUND POWER UNIT 0-32 volt DC, 400 amp

1054 24 VOLT/300
CONTINUOUS
continuous, 1000 amp
starting. Any manufacture is
acceptable
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Hobart 1
X X X X X X

JET-X II
240062
MASTER TOOL LIST
LEAD ACID BATTERY No substitute provided

1237 CHARGER
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Teledyne Battery 1
Products

TDMC-90
240064
MASTER TOOL LIST
HOIST, BATTERY - Alternate hoists may be used

6061 REMOVAL /
INSTALLATION
if attachable for battery
removal. Such units are
currently not defined.
Previous Z1695 unit is
acceptable
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1

04-6014-0010
243001
MASTER TOOL LIST
SPANNER, SEALING No alternate noted. Unit is

5026 RING (PEDQ/F MK3
BATT)
generally no longer used.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Chloire Power Storage 1
Ltd

7072
243008
MASTER TOOL LIST
KIT, MAINTENANCE Tool for servicing Saft Ni-

6063 (FOR 23491 BATT.) Cad batteries. No alternate
noted
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Saft 1

7101113
243009
MASTER TOOL LIST
SPANNER, TORQUE- Replaced by WB808 series

6065 TERMINAL NUTS
(21LBIN)
torque spanners.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Britool 1

CS2395FTS
243010
MASTER TOOL LIST
HOIST, BATTERY - LEAD Tronair adapter. No

6068 ACID (REQUIRED FOR
USE WITH 04-6014-0000)
alternate noted
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1

K2282
243011
MASTER TOOL LIST
CHARGER, BATTERY Various chargers available

6072 CHARGER/ANALYZER from local sources and/or
suppliers. Christie RH80 or
similar unit is often used.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Unk 1

MB25
243012
MASTER TOOL LIST
HEATER PROBE JET CAL No alternate given

2055
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Howell Instrument 1
X X

HB1278
260051
MASTER TOOL LIST
SQUIB TESTER (HTL) FLUKE 76, 29 OR 79

1059 MODELS ACCEPTABLE
FOR TEST (50mA or less
current. Noted units have
40mA fused pick) Fluke
outline shown.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1
X X X X X

13060A
260052
MASTER TOOL LIST
ENGINE FIRE EXT/DET Local Manufacture per MM

1058 SYS TESTER 26-00 is acceptable alternate
(shown)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

45A01776/935
260053
MASTER TOOL LIST
CRIMPING TOOL As required, various vendors.

3051
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Daniels DMC 1
X X X X X X X

MS3191-03
260054
MASTER TOOL LIST
EXTRACTING TOOL As required, various vendors.

3053
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Daniels DMC 1
X X X X X X X

MS90546-1
260055
MASTER TOOL LIST
INSERTION TOOL As required, various vendors.

3052
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Daniels DMC 1
X X X X X X X

MS90455-1
260056
MASTER TOOL LIST
TONGS, HEATING - No alternate offered.

5037 REAR BAY DETECTORS
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Graviner Manufacturing 1

IT714
261001
MASTER TOOL LIST
ADAPTER, TORQUE 5/8 AF with 3/4" drive

5035 LOADING - FIREWIRE
COUP
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

21Y2577A
261002
MASTER TOOL LIST
ADAPTER, BOTTLE No alternate offered

5038 GONE INDICATOR
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

TS2E13A
262001
MASTER TOOL LIST
FILAMENT, SPARE Alternate X599CS filament

5036 FILAMENT FOR TS2E-13A may be used. Filament
shown installed in adapter.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

6240-99-9951230
262002
MASTER TOOL LIST
TENSIOMETER, CABLE Unit for 5 cwt. to 25 cwt. with

5057 3 risers (1, 2C and 3) Unit
calibrated for cwt. and
fractional cables
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Omni Manufacturing 1

T5-2002-401-00
270001
MASTER TOOL LIST
SET, RIGGING PIN No alternate, however, many

5054 pins cross use with other
models- verify via ITEM.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25Y493AB
270002
MASTER TOOL LIST
PIN SET, RIGGING PIN No alternate, however, many

5041 SET pins cross use with other
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25-7Y15A
270003
MASTER TOOL LIST
SET, RIGGING PIN No alternate, however, many

5046 pins cross use with other
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25-8Y59-1A
270004
MASTER TOOL LIST
PIN SET, RIGGING PIN No alternate, however, many

5049 SET pins cross use with other
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25-9Y277-1A
270005
MASTER TOOL LIST
PIN SET, RIGGING PIN For Model 1000. Similar to

6075 SET 25-9Y227-1A. Note: 227-1A
also contains addition of 285-
1A Pin (Rudder quadrant),
but, only one 409AB pin
which is in the 113-1A Set.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25-9Y113-1A
270006
MASTER TOOL LIST
RIG PIN SET No alternate specified.

1060 Flagged pins are of various
specific lengths 1/4" stock.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

045A-99144-001
270050
MASTER TOOL LIST
SPANNER WRENCH No alternate given

2059 (FWD WING)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

122-062009-35
270051
MASTER TOOL LIST
TENSIOMETER 30 to 300 lbs. (3 risers)

1082 range 1/16" to 1/4" cables
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Opti Manufacturing 1
X X

T5-2002-104-00
270052
MASTER TOOL LIST
TORQUE ADAPTER, NUT- Actual tool shown, local

1083 FLIGHT CONTROL SYS manufacture instructions in
KA 200/300 Comm. 60.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

TS 1171
270053
MASTER TOOL LIST
CABLE TENSION METER 15 to 150 lbs. Range.1/16,

1081 1/8, 3/32, 3/16, 7/32, and 1/4
inch diameter cable can be
checked. Typical type unit
shown.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

U.S. Industrial Tool 1
X X X X

TP222
270054
MASTER TOOL LIST
TRIM TAB FREE PLAY Local manufacture per

1077 CHECK FIXTURE appropriate MM ATA 27 as
alternate tool. Calibrated Dial
Indicator must be with unit
for use.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1
X X X X X X

810-45-135030-9
270055
MASTER TOOL LIST
BUBBLE PROTRACTOR No alternate noted

3054
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1
X X X X X X X

36D2844
270056
MASTER TOOL LIST
UNIVERSAL TRAVEL Alternate for select:

1230 BOARD KA/SS/Hawker/1900Airline/
Bonanza/Baron, Aileron and
Elevator boards. Primery rig
tool for: Premier, Aileron and
Elevator.Current 98-32928
manual required for use as
alternate.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1
X X X X X X

TE-100TB
270057
MASTER TOOL LIST
GAUGE, AILERON No alternate provided

5040 GEARED TAB
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25-6Y1729AB
271001
MASTER TOOL LIST
EXTRACTOR, AILERON No alternate provided

5042 OUTER HINGE BOLTS
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25-8Y109-1A
271002
MASTER TOOL LIST
PLATE, AILERON No alternate provided

5053 RIGGING
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25Y283AB
271003
MASTER TOOL LIST
PLATE, AILERON No alternate provided

5039 RIGGING
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25-6Y1665A
271004
MASTER TOOL LIST
PLATE, AILERON TE100-TB may be used as

5045 RIGGING alternate
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25-8Y35-1A
271005
MASTER TOOL LIST
ELEVON CONTROL Use Local Manufacture pin

1086 MIXER RIG PIN shown in MM 27-20-00, page
17
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

LOCAL MANUFACTURE
271051
MASTER TOOL LIST
HYD. LOCK SOLINOID Local Manufacture per MM

1088 BREAKOUT BOX 27-50-00 page 20 (same as
ref. 1080 tool callout)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

TE792003/935-1
271052
MASTER TOOL LIST
FWD WING RIG PIN Refer to MM, Local

1067 Manufactured pin is
acceptable alternate
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

122-410700-25
271053
MASTER TOOL LIST
ELEVON TRAVEL BOARD Use of TE-100TB replaces

1065
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

122-130000-4/D810-4
271054
MASTER TOOL LIST
ELEVON TRAVEL BOARD Use of TE-100TB replaces

1064
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

122-130000-3/D810-3
271055
MASTER TOOL LIST
PROTRACTOR ASSY No approved alternate

1062
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 2

045A-99228-001
271056
MASTER TOOL LIST
PROTRACTOR ASSY No approved alternate

1061
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 2

045A-99226-001
271057
MASTER TOOL LIST
RIG PIN ELEVON Use Local Manufacture pin

1085 shown in MM 27-20-00, page
17
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

LOCAL MANUFACTURE
271058
MASTER TOOL LIST
BREAKOUT BOX FWD Local Manufacture per MM

1080 WING 27-50-00 page 20
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

TE792003/935-1
271059
MASTER TOOL LIST
DIGITAL PROTRACTOR Kell-Strom Model 3600

1238 acceptable/preferred (p/n
6005) tolerance +/- .01
degree. Model 360 has
tolerance of 0.1 degree.
Model 3600 used with
Universal Travel Board
TE-100TB.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Kell-Strom Model 360 1

KS5549
271060
MASTER TOOL LIST
RIG PIN SET LOCAL MANUFACTURE

1239 INST. TBI IN MM.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

390-524001-0001/917
271061
MASTER TOOL LIST
GAUGE, RUDDER TRIM No other alternates offered

5048 AND GEARED TAB
(REPLACES 25Y1093)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25-8Y97-1A
272002
MASTER TOOL LIST
GAUGE, RUDDER No alternate provided

5047 MOVEMENT (REPLACES
25Y75A/B)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25-8Y91-1A
272004
MASTER TOOL LIST
RUDDER L/H TRAVEL No substitute referenced.

1074 BOARD
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

122-630000-3/D810-1
272051
MASTER TOOL LIST
RUDDER R/H TRAVEL No substitute referenced

1075 BOARD
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

122-630000-4/D810-2
272052
MASTER TOOL LIST
RIG PIN RUDDER Use Local Manufacture pin

1084 shown in MM 27-20-00, page
17
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

LOCAL MANUFACTURE
272053
MASTER TOOL LIST
PROTRACTOR, STALL No alternate provided

5044 VANE
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25-8Y121-1A
273001
MASTER TOOL LIST
JIG, SETTING - L.E. 1000 series. No alternate

6152 STALL TRIGGER noted
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25-9Y79-1A
273002
MASTER TOOL LIST
CLIP, ELEVATOR No alternate provided

5051 COMPENSATOR
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25-9Y85-1A
273003
MASTER TOOL LIST
PLATE, ELEV. RIGGING- TE100-TB may be used as

5055 USED W/ 25-8Y11-1A or
25Y195A
alternate
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25Y73A
273004
MASTER TOOL LIST
PLATE, ELEV. RIGGING- TE100-TB may be used as

5050 USE W/25-8Y11-1A alternate
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25-9Y301-1A
273005
MASTER TOOL LIST
FORWARD WING No substitute referenced

1073 TRAVEL BOARD
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

122-620000-2/K41499
273051
MASTER TOOL LIST
FORWARD WING No substitute referenced

1072 TRAVEL BOARD
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

122-620000-1/K41498
273052
MASTER TOOL LIST
ELEVATOR TRAVEL Use of TE-100TB replaces

1071 BOARD
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

122-610000-6/D810
273053
MASTER TOOL LIST

1070 BOARD
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

122-610000-5/D810
273054
MASTER TOOL LIST
FLAP TRAVEL BOARD Alternate means of rigging

1069 shown in MM 27-50-00 page
16/17
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

122-610000-2/D810
273055
MASTER TOOL LIST
STALL WARNING FORCE No substitute referenced

1076 APPLICATOR
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Safe Flight 1
X X

1952-1-3-5
273151
MASTER TOOL LIST
STALL WARNING Local Manufacture per 27-31

1079 BREAKOUT BOX in 200 MM as alternate
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Safe Flight 1
X X

SK100360 (SAFE FLIGHT)
273152
MASTER TOOL LIST
STALL WARNING Local Manufacture per MM

1063 BREAKOUT BOX
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

122-040149/935
273153
MASTER TOOL LIST
STALL WARNING FORCE Used on early model King

1078 APPLICATOR Airs (90 and 100) No
substitute referenced
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Safe Flight 1

990-4
273154
MASTER TOOL LIST
BOARD, HORIZONTAL No alternate provided

5052 STABILIZER
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25Y195A
274001
MASTER TOOL LIST
BOARD, INCIDENCE - TE100-TB may be used for

5043 HORIZONTAL STAB. this board
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25-8Y11-1A
274002
MASTER TOOL LIST
BOARD, WING No alternate given

6076 INCIDENCE
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25Y829A
275001
MASTER TOOL LIST
PLATE, FLAP RIGGING No alternate provided

5056
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25Y831A
275004
MASTER TOOL LIST
GAUGE, ASSEMBLY - Unit not required when

6074 FLAP RIGGING rigging plate is in place for
800 and 1000 models
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25-8Y191-1A
275005
MASTER TOOL LIST
FLAP ACT TEST BOX No alternate noted

1066
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

122-381014/935
275051
MASTER TOOL LIST
FLAP TRAVEL BOARD Alternate means of rigging

1068 shown in MM 27-50-00 page
16/17
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

122-610000-1/D810
275052
MASTER TOOL LIST
BLOW DOWN No alternate given

2127 CHARGING TOOL
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

TE79-390BLDN/939
275053
MASTER TOOL LIST
CONTROL LOCK Loose equipment

2056
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

122-590011-17
277051
MASTER TOOL LIST
TOOL, FUEL SAMPLING Loose tools

5062 (REPLACES 25Y1125AB
OR 25-9Y215-1A)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25-9Y385-1A
280001
MASTER TOOL LIST
FUEL SUMP DRAIN Loose equipment

2060 WRENCH
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

101-590020-1
280051
MASTER TOOL LIST
FUEL SUMP DRAIN Loose equipment

2061 WRENCH
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

101-590020-7
280060
MASTER TOOL LIST
FIRE EXTINGUISHER, As required, various vendors.

3055 ABC TYPE
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

American Extinguisher 1
X X X X X X X X

LOCAL PROCURE
280064
MASTER TOOL LIST
FUEL SAMPLEUNIT Sample unit has bit inserts

1240 W/.125 HEX ADAPTER for use with access/testing.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1

07-3005-6900
280065
MASTER TOOL LIST
ADAPTER, FUEL FLOW No alternate provided

5064 TEST
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25YTS303R1A
282001
MASTER TOOL LIST
ADAPTER, FUEL FLOW No alternate provided

5063 TEST-USE
W/25YTS303R1A
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25YTS303R17A
282002
MASTER TOOL LIST
ADAPTER, VENTRAL Fuel flow calibration use. No

6086 TANK FUEL alternate noted
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

TS120R133A
282003
MASTER TOOL LIST
ADAPTER, VENTRAL Fuel flow calibration use. No

6087 TANK FUEL FLOW
CHECKS
alternate noted
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

TS120R141A
282004
MASTER TOOL LIST
HOSE, FLEXIBLE, USE No alternate provided. Hose

5065 W/ 25YTS303R1A &
25YTS303R17A
is attached to shown
assemble for use (hose at
rear of unit).
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

TSM4445F4F40SS
282005
MASTER TOOL LIST
EQUIPMENT, The support frames can be

6078 HANDLING - VENTRAL
TANKS
used to store the tanks after
servicing
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25-9Y115-1A
282006
MASTER TOOL LIST
ADAPTER, FUEL TANK "Y" connector with cap

6080 DRAIN
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25Y867A
282007
MASTER TOOL LIST
TEST SET, FUEL Barfield 400A with Hawker

5060 INDICATING SYSTEM 125 Module is approved
alternate
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Smith Industries 1

0602KQC03
284001
MASTER TOOL LIST
CABLE KIT, USE WITH No alternate given. Use with

5058 0602KQC03 0602KQC03 only. Cables not
shown, attach to shown unit.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Smith Industries 1

0208KAQ01
284002
MASTER TOOL LIST

5059 0602KQC03 0602KQC03 only Cables not
shown, attach to shown unit
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Smith Industries 1

0216KAQ01
284003
MASTER TOOL LIST

5061 0602KQC03 0602KQC03 only.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Smith Industries 1

0801KQC02
284004
MASTER TOOL LIST
CABLE, FOR USE WITH For use with QAA only

6084 QAA (700 SERIES 7001-
20 ONLY)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Smiths Industries 1

CGA111
284006
MASTER TOOL LIST
CABLE, FOR USE WITH Used with QAA only. Not

6077 QAA used with Barfield Test units.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Smiths Industries 1

242BTE
284007
MASTER TOOL LIST
TESTSET, FUEL 1 through 700, cables for

6085 INDICATING SYSTEM hook-up required for use.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Smiths Industries 1

QAA
284008
MASTER TOOL LIST
ADAPTER, FOR USE For use with QAA only

6083 WITH QAA
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Smiths Industries 1

CGA110
284009
MASTER TOOL LIST
ADAPTER, FOR USE For use with QAA only

6082 WITH QAA
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Smiths Industries 1

CGA109
284011
MASTER TOOL LIST
CABLE, FOR USE WITH For use with QAA only

6081 QAA
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Smiths Industries 1

CE1
284012
MASTER TOOL LIST
FUEL QUANTITY TESTER Manual verification method

1098 referred to in manual. May
be used in lieu of tester if
applicable tests being
performed.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

TE79-400A/935
284051
MASTER TOOL LIST
FUEL QUANTITY Recommended tool,

1097 SYSTEM ANALYZER Acceptable optional
procedures referenced in
MM for testing without
Analyzer
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

TE79-2001/935-2
284052
MASTER TOOL LIST
FUEL QUANTITY TEST No alternate specified. Used

1090 CABLE -FUSELAGE TANK with Barfield 2548H Tester
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Barfield 1

101-00477B
284052
MASTER TOOL LIST
FUEL QUANTITY TEST No alternate specified

1096 EQUIPMENT-GULL
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Barfield 1
X X X

DC400 W/KA MODULE 101-00802
284053
MASTER TOOL LIST
FUEL QUANTITY TEST No alternate specified

1095 EQUIPMENT -
CONSOLIDATED
Previous "G" model is also
acceptable.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Barfield 1
X X X

2548H
284054
MASTER TOOL LIST
FUEL QUANTITY PROBE No alternate specified

1094 BREAKOUT TEST(UC/UE)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

118-389004/935
284055
MASTER TOOL LIST
FUEL PROBE ADAPTER No alternate specified.

1092 Supplied as loose equipment
with DC400 w King Air
module.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

101-00814
284056
MASTER TOOL LIST
EXPLOSION PROOF As required, various vendors.

3056 LIGHT
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Craftsman 1
X X X X X X X X

LOCAL PROCURE
284057
MASTER TOOL LIST

1091 CABLE - BRANSON TANK with Barfield 2548H Tester
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Barfield 1

101-00489
284058
MASTER TOOL LIST
FUEL QUANTITY PROBE No alternate specified

1093 BREAKOUT TEST(UA/UB)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

114-389001/935
284059
MASTER TOOL LIST

1089 CABLE - WING TANK with Barfield 2548H Tester
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Barfield 1

101-00477A
284060
MASTER TOOL LIST
FUEL CALIBRATION LOCAL MFGR. INFO TBI IN

1241 HARNESS MM
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

390-000011/917-29
284061
MASTER TOOL LIST
FUEL PROBE SELECTOR No substitute provided

1242
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

390-100001/917-12
284062
MASTER TOOL LIST
ADAPTERS, HYDRAULIC quick release coupler to line

5069 ADAPTER KIT FOR
TRONAIR RIG
adapter. No alternate
suggested
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1

KHC1005
290003
MASTER TOOL LIST
TEST RIG, HYDRAULIC Various alternate units are

6088 SYSTEM - 6GPM FLOW
RATE (17% LESS FOR
commercially produced by
various vendors. All units to
50Hz MAINS) be rated at 3000 PSI (207
BAR) with 6 GPM (23 LPM)
flow required
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1

05-3005-1100
290006
MASTER TOOL LIST
TOOL, PIPE FLARING Tube Flaring tools for 5/8 to

6091 (5/8"- 1-1/4") 1 1/4 inch tubes. AGS is
British Standard single flare
tooling
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Britool 1

AGS773
290007
MASTER TOOL LIST
EXPANDER, USE W/ Tube Flaring tools for 5/8 to

6093 AGS773 FLARING
STAINLESS STEEL TUBE
1 1/4 inch tubes. AGS is
tooling
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Britool 1

J6615ITEM3
290008
MASTER TOOL LIST

6094 AGS773 FLARING
tooling
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Britool 1

J6615ITEM4
290009
MASTER TOOL LIST
TOOL, PIPE FLARING Tube Flaring tools for 3/16 to

6090 (3/16"-1/2") 1/2 inch tubes. AGS is British
Standard single flare tooling
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Britool 1

AGS772
290010
MASTER TOOL LIST
TEST RIG, HYDRAULIC Various alternate units are

6089 SYSTEM - 15GPM FLOW
RATE (17% LESS FOR
commercially produced by
various vendors. All units
50Hz MAINS) are rated to 3500 PSI (241
BAR)with 15 GPM (57LPM)
flow required.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1

05-7022-1100
290011
MASTER TOOL LIST
HYDRAULIC POWER 3000 PSI (207 BAR),

1099 UNIT filtering, 6 gpm min. (23
LPM), Mobile or electric
driven units may be used.
NOTE: Beechjet may use
1500 PSI (121 BAR) unit as
alternate (Ex: 05-7008-1100)
Sample unit shown
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1
X X

05-7015-1100
290051
MASTER TOOL LIST
COUPLING KIT This or other applicable

1100 manufactured couplings may
be used. Fittings must be
appropriate to Hydraulic unit
used and Aircraft
attachment. Sample units
shown.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1
X X

KHC-1004
290052
MASTER TOOL LIST
ADAPTER, TORQUE 7/16 AF x 3/8 inch drive.

5066 LOADING Due to offsets required to
use, local tool whilst may be
used, is not highly
recommended
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25Y1223
291001
MASTER TOOL LIST
TOOL, SEAL Set of 3 dental style picks for

5068 MANIPULATING aid in installing and removing
seals without causing
damage to seal.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1

FHQ100
291002
MASTER TOOL LIST
KIT, HYDRAULIC SYSTEM Contains caps and plugs for

5067 various sized lines in
aircraft. No suggested
substitute.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

BAEREF000003812
291003
MASTER TOOL LIST

6092 AGS773 FLARING
tooling
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Britool 1

J6615ITEM2
291004
MASTER TOOL LIST
TOOL, CLENCHING, No noted alternate

6097 SIMPLIFIX DE-ICE
COUPLINGS
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Simplifix 1

T300-120A
300001
MASTER TOOL LIST
TOOL, CLENCHING, No noted alternate

6096 SIMPLIFIX DE-ICE
COUPLINGS
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Simplifix 1

T300-112A
300002
MASTER TOOL LIST
WIPER ARM TENSION No alternate given

2062 ADJUSTMENT WRENCH
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Ideal Tool 1
X X

XW20509
300051
MASTER TOOL LIST
BFG RUBBER HAND Wood or plastic roller, 2 to 3

1102 ROLLER inch dia., 3 to 4 inch long.
Metal roller is not
acceptable, except for metal
edge tools provided by
vendor (used specifically for
estane boots.)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

B.F. Goodrich 1
X X X X

74-451-74
300052
MASTER TOOL LIST
PNEUMATIC TEST UNIT No alternate currently

1101 referenced. 343 Kit contains
all procedures and
information for testing.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Airborne 1
X X X X

343
300053
MASTER TOOL LIST
SPRAY GUN, DEVILBISS As required, various vendors.

3057 OR BINKS
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Binks 1
X X X

JGA75X
300054
MASTER TOOL LIST
PAINT MIX CUP No alternate noted

3058
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Binks 1
X X X

NO 4 FORD CUP
300055
MASTER TOOL LIST
TEST TOOL ELEC Local manufacture per

2058 CLUTCH (LOCAL
MANUFACTURE)
maintenance information
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

101-524887/935
300056
MASTER TOOL LIST
TEST FIXTURE ELEC Local manufacture per

2057 CLUTCH (LOCAL
MANUFACTURE)
maintenance information
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

101-524887/934
300057
MASTER TOOL LIST
TESTSET, WINDSCREEN No alternates offered. Used

6095 GOLD FILM on 1-700 series
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25YTS31E5A
304001
MASTER TOOL LIST
INDICATOR, ICE Used for testing ice detector

5070 DETECTOR TORQUE operation. No substitute
recommended.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

WB808-1680
308001
MASTER TOOL LIST
TAIL DE-ICE TEST SET As an option, local

1103 manufacture to drawings
available directly from
Beechjet Technical Support.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

128-11218/935
310051
MASTER TOOL LIST
MACHINE, AUTOMATIC No alternates offered

6098 WHEEL CRACK
DETECTOR
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

125REF000000026
320001
MASTER TOOL LIST
WRENCH, TORQUE (10- Standard torque wrench, 10

6124 150 LBFT) to 150 Foot Lbs. May be
used.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

CCM150
320002
MASTER TOOL LIST
DRIVER, TORQUE, 1-4 No alternate noted.

6133 SQ DRIVE (CAPACITY 5-
45 LBIN)
Standard torque wrench (1/4
inch drive) in the 5-45 inch
pound range may be used.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

QUICKSET
320003
MASTER TOOL LIST
SOCKET, 11/32AF X 1/4 Any 11/32AF socket with 1/4

6125 SQ.DRIVE inch drive may be used
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

DH344
320004
MASTER TOOL LIST
PROBE, KNIFE Use with BR73 only. No

6126 FERROUS (USE WITH
BR73)
alternate noted
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

FGK10
320005
MASTER TOOL LIST
HEAD, 1-2 IN SQUARE No alternate noted

6136 DRIVE RATCHET - FOR
USE WITH CCM150
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

SSDRT1-2
320006
MASTER TOOL LIST
PROBE, PENCIL NON- Use with BR73 only. No

6132 FERROUS (WITH BR73) alternate noted
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

NFT
320007
MASTER TOOL LIST
PROBE, KNIFE NON- Use with BR73 only. No

6131 FERROUS (WITH BR73) alternate noted
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

NFK11
320008
MASTER TOOL LIST
FLYPRESS, STANDARD No alternate noted

6130
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

MODEL4A
320009
MASTER TOOL LIST
HEADSET, FOR BR73 Use with BR73 only. No

6129 alternate noted
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

HEADSETBR73
320010
MASTER TOOL LIST
SOCKET, NLG WHEEL 1 5/8AF socket

6128 AXLE NUTS - 1 5/8" AF x
3/4" DRIVE
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

HB1625
320011
MASTER TOOL LIST
PROBE, PENCIL Use with BR73 only. No

6127 FERROUS (USE WITH
BR73)
alternate noted
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

FT
320012
MASTER TOOL LIST
PIN PULLER Local manufacture (shown)

1104 to alternate provided drawing
in Beechjet Communiqué.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

045A-99142-001
320051
MASTER TOOL LIST
BRAKE CYLINDER Adjustable spanner may be

2067 SPANNER WRENCH utilized with appropriate
sized pins
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

50-590019
320052
MASTER TOOL LIST
LANDING GEAR Reference Component

2066 OVERLOAD
CLUTCH(MECH GEAR)
Maintenance manuals
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1
X X

180131
320053
MASTER TOOL LIST
MAIN GEAR SHOCK No alternate provided.

2065 DISC COMPRESSOR KIT
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

169-810031 CODE 917
320054
MASTER TOOL LIST
MAIN STRUT No alternate provided.

2063 EXTENSION LIMITER
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1
X X

115-590023-1
320055
MASTER TOOL LIST
LANDING GEAR PINS (1) No alternate provided. Loose

2068 (NOSE L. GEAR LOCK) equipment
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

LA4CR1000/NAS 1756-24
320056
MASTER TOOL LIST
POWER STEERING Local manufacture per MM

2078 BREAKOUT
BOX(AIRIGHT,
UA/UB)(MM 32-
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Decota 1

API1549-3
320057
MASTER TOOL LIST
NOSE LANDING GEAR No alternate provided.

2064 SHOCK STRUT LIMITER
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1
X X

115-590035
320058
MASTER TOOL LIST
NOSE GEAR DOOR PIN No alternate provided. Loose

2070 equipment
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

LA7CR2500/NAS 1756-24
320059
MASTER TOOL LIST
HAND PRES. POT Any bleeder pot with

2072 BLEEDER pressure regulation of fluid
(valve) may be used. MIL-H-
5606 compatible required
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1
X X X X X

MODEL 4005
320060
MASTER TOOL LIST
MECHANICAL HYD 1500 PSI capable, inline

2073 PUMP(HYD GEAR ONLY) attachment/fitting may be
required to be utilized
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1
X X X X

TK229-1/939
320061
MASTER TOOL LIST
HAND HYD 1500 PSI capable, inline

2074 PUMP(ALTERNATE-HYD
GEAR ONLY)
attachment/fitting may be
required to be utilized.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1
X X X X

TK229/939
320062
MASTER TOOL LIST
BLEEDER HOSE No alternate provided

2075 ADAPTER
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

TK889-2 D928
320063
MASTER TOOL LIST
MAIN GEAR TEST BOX Local Manufacture per MM

1122 ATA 32-60-00 page 6
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

122-810001/935-1
320064
MASTER TOOL LIST
POWER STEERING No alternate provided

2077 BREAKOUT BOX
(DECOTO, UC-UE)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

114-380045/935-1
320065
MASTER TOOL LIST
CROW FOOT WRENCH ( Any brand "Crowfoot"

1110 M. GEAR AXLE NUT, 1
3/4")
wrench meeting AN
specification standard, 1 3/4"
jaw opening, drive size
optional, 1/2" drive
recommended.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Snap-on 1

AN8508-28
320066
MASTER TOOL LIST
CENTERING TOOL - No alternate provided

2079 NOSE GEAR
STEER(DECOTA)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

114-820000-939
320067
MASTER TOOL LIST
POWER STEERING No alternate provided

2076 BREAKOUT BOX
(DECOTO, UC-UE)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

114-380045/935
320068
MASTER TOOL LIST
TEST CIRCUIT FOR Local Manufacture per 200

1112 LANDING GEAR TIME
DELAY
MM ATA 32-31-00 page 253
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1
X X

LOCAL MANUFACTURE
320069
MASTER TOOL LIST
MLG SWITCH TEST BOX Local manufacture per MM

1118 ATA 32
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

TK1763-7/935
320070
MASTER TOOL LIST
MAIN GEAR POSITION Local Manufacture per 200

1117 SWITCH TEST BOX MM 32-60-00 page 203
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

TK1763-5/935
320071
MASTER TOOL LIST
NOSE GEAR POSITION Local Manufacture per 200

1116 SWITCH TEST BOX MM 32-31-00 page 246
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

TK1763-2/935
320072
MASTER TOOL LIST
SHIMMY DAMPNER TOOL Local Manuafacture for

1115 TK2281/936 shown in
Premier MM 20-52-00.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1
X X

T-00741 or TK2281/936
320073
MASTER TOOL LIST
LANDING GEAR CLUTCH Strap wrench

2080 WRENCH(MECH GEAR
SYS)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

50-590078
320074
MASTER TOOL LIST
GLANDNUT WRENCH No substitute known

1114
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1
X X

T-00690
320074
MASTER TOOL LIST
NOSE GEAR TEST BOX SS MM 32-60 drawing to

1108 (MM 32-60-00) local manufacture.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

122-820000/935-2
320076
MASTER TOOL LIST
TIRE SEALANT No alternate provided

2071 INJECTOR
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Fuller Brothers 1
X X X

M400
320077
MASTER TOOL LIST
NOSE GEAR TEST BOX Local Manufacture per MM

1121 ATA 32-60-00 page 5
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

122-820000/935-2
320078
MASTER TOOL LIST
TEST GAUGE Any Hydraulic gauge 0-1600

1111 HYDRAULIC (0-1600 PSI) range, +/- 10 PSI accuracy
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1

AS REQUIRED
320079
MASTER TOOL LIST
LANDING GEAR DPPH-100 is acceptable

1109 TENSION GAGE
ASSEMBLY
alternate. Push-pull gauge
10 to 100 lbs. range,
Indicated with appropriate
hook for checking tension
pull.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1
X X X X X

45-590074-7
320080
MASTER TOOL LIST
MAIN GEAR TEST BOX SS MM 32-60 drawing to

1107 (MM 32-60-00) local manufacture.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

122-810001/935-1
320081
MASTER TOOL LIST
WHEEL DRIVE CLIP 1900 MM and SS MM (32-40-

1106 (1900 SERIES) 00 p.40) show drawing for
local manufacture. Either
style clip is acceptable. 2
each required for Premier
testing.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1
X X X

114-810055-939
320082
MASTER TOOL LIST
HYDRAULIC HAND PUMP Any MIL-H-5606 type, 0-

1105 (0-3000 PSI) 3000 PSI, filtered hand
pump. Various vendors
available.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1
X X X X X X

06-4005-0501
320083
MASTER TOOL LIST
NOSE GEAR DOOR No substitute offered

1119 LOCKPIN
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

122-590017-3
320084
MASTER TOOL LIST
BLEEDER HOSE ASSY. - Local manufacture per MM

1120 LOCAL MFG. ATA 32-40-00 page 15
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

TK889-2D928
320085
MASTER TOOL LIST
STEERING ANGLE Clamp attached pointer and

1113 PROTRACTOR protractor, attachable to
upper leg, accurate to +/- 2
degree.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1
X X

LOCAL PROCURE
320086
MASTER TOOL LIST
LANDING GEAR PINS (2) No alternate provided. Loose

2069 (MAIN L. GEAR LOCK) equipment
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 2

LA4CR1500/NAS 1756-24
320087
MASTER TOOL LIST
TIRE BEAD BREAKER As required, various vendors.

3059 (MANUAL) & SAFETY
CAGE
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1
X X X X X X X X

14-4039-0000
320088
MASTER TOOL LIST
ULTRASONIC CLEANER As required, various vendors.

3060
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Branson Cleaning 1
Equipped.
X X X

LOCAL PROCURE
320089
MASTER TOOL LIST
LARGE DIAL PRESSURE 0-3000 PSI +/- 1/2% ,

1243 GAGES 0-3000 PSI +/-
1/2%
LARGE DIAL (Example
Dwyer guage shown)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Local Procured 1

3000 PSI GUAGE
320090
MASTER TOOL LIST
CLAMP, MAIN LANDING Recommended unit.

5075 GEAR DOOR JACK 25Y1491A may be used but
is older design type.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25Y1491-31A
321002
MASTER TOOL LIST
SPANNER, SIDE STAY Square drive unit

5077 RETAINING NUT
(REPLACES 25Y259A)
recommended over earlier
style hand-pin unit 25Y259A,
due to better torque
control/application
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25Y1883-1A
321003
MASTER TOOL LIST
SPANNER, SIDE STAY No replacement noted

5082 LOCATING PIN
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25Y261A
321005
MASTER TOOL LIST
SPANNER, MAIN GEAR No replacement noted

5083 GLAND NUT
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25Y613AB
321006
MASTER TOOL LIST
SPANNER, GLAND SEAL No alternate provided

5072
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25-9Y15-1A
321007
MASTER TOOL LIST
ADAPTER, OLEO OIL May be used on 125 series

5085 CHARGING through 800. Not usable on
1000 series, see 25-9Y27-1A
for full range replacement.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25Y759A
321008
MASTER TOOL LIST
SPANNER, ORIFICE No replacement provided

5074 HEAD
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25-9Y7-1
321010
MASTER TOOL LIST
SPANNER, FLUTTER No alternate given. Used for

6102 GUIDE PLATE gear overhaul.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25-9Y9-1A
321011
MASTER TOOL LIST
SPANNER, RING NUT 1000 Series- remove and

6099 install main landing gear
head. No alternate noted
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25-9Y11-1A
321013
MASTER TOOL LIST
SPANNER, RING NUT 1000 Series- remove and

6100 OIL HEAD install main landing gear oil
head. No alternate noted
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25-9Y17-1A
321016
MASTER TOOL LIST
FIXTURE, HOLDING - Holding jig for main gear

6101 MAIN U/C LEG strut overhaul. Alternate
securing jigs may be locally
produced and manufactured
as needed.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25-9Y87-1A
321018
MASTER TOOL LIST
SPANNER, NOSE GEAR No substitute noted

5078 GLAND NUT
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25Y237A
322001
MASTER TOOL LIST
SPANNER, NOSE GEAR No replacement noted

5079 AXLE RETAINING NUT
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25Y239A
322002
MASTER TOOL LIST
ADAPTER, OIL May be used on all 125

5073 CHARGING MLG/NLG series, replaces 25Y759A
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25-9Y27-1A
322003
MASTER TOOL LIST
EXTRACTOR, LOCATOR Extract locator pins

6105 NLG (25UN285) from the lower
bearing of nose gear.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25Y1363A
322004
MASTER TOOL LIST
PIN, NOSE LEG OLEO Aligns lower bearing on nose

6104 ALIGNMENT leg before fitting locator pins
(25UN285).
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25Y1323
322005
MASTER TOOL LIST
SPANNER, ORIFICE Remove/install orifice place

6106 PLATE - NOSE LEG (25UN255A) in nose gear.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25Y235A
322006
MASTER TOOL LIST
SPANNER, RET. NUT remove/ install pressure

6107 PRESSURE NLG head retaining nut (25UN219)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25Y241A
322007
MASTER TOOL LIST
FIXTURE, NOSE OLEO Holding jig for nose gear

6103 HOLDING strut overhaul. Alternate
securing jigs may be locally
produced and manufactured
as needed.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25Y1319A
322009
MASTER TOOL LIST
LANDING GEAR PIN No substitute provided

1244 PULLER
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

TK2092/917
322010
MASTER TOOL LIST
TOOL, COMPRESSION, No substitute provided

5076 PARKING BRAKE
SPRING STRUT
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25Y1817A
324002
MASTER TOOL LIST
FIXTURE, BRAKE 800 series. Recommended

6113 ROTOR ALIGNMENT alternate is SA30088
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Dunlop Limited 1

AA1377
324003
MASTER TOOL LIST
FIXTURE, BRAKE AA1377 may be used for

5101 ROTOR ALIGNMENT
(REPLACES AA1377)
800-1000 series
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Dunlop Limited 1

SA30088
324005
MASTER TOOL LIST
EXTRACTOR, MAIN 800 series. Recommended

6114 WHEEL alternate is SA30090
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Dunlop Limited 1

AA1388
324006
MASTER TOOL LIST
EXTRACTOR, MAIN Aids in removal of main

6111 WHEEL landing gear wheel. 1 to 700
series
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Dunlop Limited 1

A11262
324007
MASTER TOOL LIST
EXTRACTOR, MAIN 800-1000 main gear wheel

6135 WHEEL (REPLACES
AA1388)
removal. AA1388 previous
alternate may be used
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Dunlop Limited 1

SA30090
324008
MASTER TOOL LIST
FIXTURE, BRAKE PAD Used to rivet brake friction

6117 RIVETING pads (w/2 ton press). Tool
AO103065 is used with this
tool
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Dunlop Limited 1

AM21749-1
324009
MASTER TOOL LIST
GAUGE, TENON WEAR No alternate given

5087
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Dunlop Limited 1

A0101795
324011
MASTER TOOL LIST
SPANNER, MAXARET No replacement noted

5088 HYDRAULIC COUPLING
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Dunlop Limited 1

A0107745
324012
MASTER TOOL LIST
TOOL, MAXARET No replacement noted. For 1

5089 INSTALLATION/EXTRACT to 700 models. A125529 is
not a replacement (800-1000
only)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Dunlop Limited 1

A0109691
324013
MASTER TOOL LIST
GAUGE, HEAT PACK Used on 1-400 only. No

5090 WEAR replacement noted
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Dunlop Limited 1

A0115986
324014
MASTER TOOL LIST
GAUGE, HEAT PACK Used on 600-700 only. No

5091 WEAR replacement noted
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Dunlop Limited 1

A0117370
324015
MASTER TOOL LIST
GAUGE, HEAT PACK A0125601 may be used for

5103 WEAR (EQUV. TO
A0125601)
800 series
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Dunlop Limited 1

SAM20084
324017
MASTER TOOL LIST
MACHINE, TIRE Tronair 14-6801-0120 with Z-

6110 REMOVAL 1064-12 and Z-1063-15 tire
adapter rings may be used
as alternate. Other vendors
with proper sized rings may
also be utilized
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Dunlop Limited 1

A10444
324018
MASTER TOOL LIST
TOOL, BRAKE No replacement noted

5094 RESETTING
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Dunlop Limited 1

A11921
324019
MASTER TOOL LIST
TOOL, BRAKE 800 series. Recommended

6112 RESETTING, IN-SITU alternate is SA30089
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Dunlop Limited 1

A16803
324020
MASTER TOOL LIST
TOOL, BRAKE A16803 may be used for 800-

5102 RESETTING, BRAKES IN-
SITU (REPLACES A
1000 series
16803)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Dunlop Limited 1

SA30089
324021
MASTER TOOL LIST
SPANNER, MAIN GEAR No replacement noted

Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25Y249AB
324025
MASTER TOOL LIST
SPANNER, MAIN GEAR No alternate provided

Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25-9Y13-1A
324026
MASTER TOOL LIST
SPANNER, MAXARET No replacement noted

5081 RETAINING NUT
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25Y257A
324027
MASTER TOOL LIST
SPANNER, MAIN WHEEL No replacement noted

5084 NUT
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25Y725A
324028
MASTER TOOL LIST
TOOL, LOADING/& Used for compression,

6118 EXTRACTION, BRAKE
PISTON
loading and extraction of
brake unit liner Assy.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Dunlop Limited 1

AM23076
324029
MASTER TOOL LIST
TOOL, CLAMPING Clamps plates during

6119 PLATES, BRAKE STATOR overhaul
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Dunlop Limited 1

AM23077
324030
MASTER TOOL LIST
DEVICE, LOAD Resets brake piston and

6120 CHECKING, PISTON/
LINER
lining into brake unit
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Dunlop Limited 1

AM23104
324031
MASTER TOOL LIST
EXTRACTOR, MLG !000 only. No replacement

5096 WHEEL DRIVE BLOCK noted
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Dunlop Limited 1

AM24562
324032
MASTER TOOL LIST
TOOL, MAXARET 800-1000 only. Do not use

5092 INSTALLATION/EXTRACT A0109691 unit (1-700
series) No replacement
noted
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Dunlop Limited 1

A125529
324036
MASTER TOOL LIST
FIXTURE, BRAKE No replacement noted

5093 ROTOR ALIGNMENT
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Dunlop Limited 1

A11848
324037
MASTER TOOL LIST
RING, PRESSURE, NOSE Use with Dunlop tire removal

6115 WHEEL-USE W/ A10444 machine A10444 (Main tire
ring)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Dunlop Limited 1

AM20747
324037
MASTER TOOL LIST
TOOL, MODULATOR No replacement noted

5095 ALIGNMENT
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Dunlop Limited 1

AM23911
324038
MASTER TOOL LIST
TEST BLOCK, FERROUS Standard for verification of

6121 FOR USE WITH BR73 BR73 function.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

BAEREF000007007
324038
MASTER TOOL LIST
MACHINE, WHEEL Various vendors supply

5097 BALANCING wheel balance unit. Spin unit
with clock balancing
indication recommended for
ease of balancing.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

D755-1
324039
MASTER TOOL LIST
DETECTOR, EDDY Eddy Current verification of

6123 CURRENT CRACK ferrous and non-ferrous
cracks in wheel/brake
components
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

BR73
324039
MASTER TOOL LIST
TEST BLOCK, NON Standard for verification of

6122 FERROUS FOR USE
WITH BR73
BR73 function.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

BAEREF000007008
324040
MASTER TOOL LIST
PUMP, OLEO HYD. Tronair fluid replenishment

5098 REPLEN. RIG unit is acceptable alternate
(06-4005 series shown)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

ESP2092
324040
MASTER TOOL LIST
RING, PRESSURE, MAIN Use with Dunlop tire removal

6116 WHEEL-USE W/ A10444 machine A10444 (Nose tire
ring)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Dunlop Limited 1

AM20749
324041
MASTER TOOL LIST
GAUGE, PAD WEAR 1000 series wear pad check

6134 tool
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Dunlop Limited 1

SA010321
324041
MASTER TOOL LIST
PEG, PEENING (USE use with composite riveting

6108 WITH AM21749-1) set during friction pad
installation
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Dunlop Limited 1

A0103065
324042
MASTER TOOL LIST
SPANNER, TORQUE No alternate noted.

6109 (VALVE CORE) Alternate valve core tools
may be available and serve
for proper valve core
remove/install.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Dunlop Limited 1

A0106115
324043
MASTER TOOL LIST
INSTRUMENT POST No alternate noted

3061 LIGHT WRENCH
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

TK-1521
330051
MASTER TOOL LIST
BULB REPLACE TOOL, No alternate provided

2081 INDICATOR
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

581-901
330052
MASTER TOOL LIST
T- LIGHT COMPARATOR Previous DB45-B7 is higher

1123 (350, 1900 & BJ ONLY) limit (160 mL)than required.
B1 is 100 microlamberts as
required for these aircraft
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Self-Powered Lighting 1
X X X

DB45-B1
330053
MASTER TOOL LIST
LIGHTING TEST UNIT Local Manufacture per 33-51-

1254 00 Page 2 in MM.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

UBF93110-TU
330054
MASTER TOOL LIST
FLASH MEASURING GUN American Aerospace ST-

2131 4000 is acceptable
alternate. Any unit meeting
requirement to measure 100
to 400 candelas and 40 to
180 flashes with +/-2%
accur. Apply to flashing anti-
collision sys. only.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

DeVore Aviation 1
X X X X X X X

FMG4400D
334001
MASTER TOOL LIST
VOR/ILS TESTER, RAMP No alternate noted. Updated

3065 units may be used
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

IFS 1
X X X X X X X X

NAV 401
340051
MASTER TOOL LIST
TRANSPONDER RAMP No alternate noted. Updated

3064 TEST SET units may be used
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

IFS 1
X X X X X X X X

ATC-601
340052
MASTER TOOL LIST
PITOT STATIC TESTER Various alternate units

4005 offered, must be able to
verify and certify aircraft
system condition.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1
X X

TK1783-1/939
340053
MASTER TOOL LIST
PITOT STATIC TEST SET As required, various

3062 vendors. Must be approved
to certify aircraft system
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Barfield 1
X X X X X X X X

1811-F-D
340054
MASTER TOOL LIST
NAV-AIDS PITOT STATIC No alternate provided.

1126 ADAPTER (STARSHIP) Available via Barfield or Nav
Aids.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Nav-Aids 1

PSS88364-3-4-4
340055
MASTER TOOL LIST
NAV-AIDS PITOT STATIC No alternate provided.

1125 ADAPTER (1900) Available via Barfield or Nav
Aids. Typical unit shown.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Nav-Aids 1

PSS88340-3-4-4
340056
MASTER TOOL LIST
PITOT ADAPTER No alternate provided.

1124 Consists of 3/4 ID, 1" OD, 9
inch long rubber hose with
#3 rubber plug and 3 #10
clamps.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1
X X

TK1783-3/939-1
340057
MASTER TOOL LIST
DME RAMP TEST SET No alternate noted. Updated

3063 units may be used
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

IFS 1
X X X X X X X X

ATC-600
340058
MASTER TOOL LIST
ADAPTER, STALL VENT Nav-aids units may be used

5111
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

WIDS107G
341001
MASTER TOOL LIST
ADAPTER, PRESSURE Alternate Nav-aids units may

5105 HEAD be used
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Negretti Aviation 1

20293
341002
MASTER TOOL LIST
ADAPTER, STATIC VENT Nav-aids units may be used

5107 PLUG
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25YTS129R21A
341003
MASTER TOOL LIST
BLANK, STATIC VENT Nav-aids units may be used

5108
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25YTS129R23A
341004
MASTER TOOL LIST
TEST SET, AIR DATA Various Vendor units

6137 SYSTEM - PITOT STATIC available. Barfield and IFR
offer units acceptable for
testing to FAA regulation
standards.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

IFR 1

ADTS405F
341005
MASTER TOOL LIST
ADAPTER, PRESSURE Nav-aids units may be used

5109 HEAD
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Rosemount Limited 1

884FG
341006
MASTER TOOL LIST
ADAPTER, PRESSURE No replacement noted

5104 HEAD
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

1376
341007
MASTER TOOL LIST
TEST SET, IFR offers various units

6139 MARKER/NAV/COMM acceptable for testing to FAA
regulation standards.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

IFR 1

NAV402AP
341007
MASTER TOOL LIST
TEST SET, STALL IDENT No alternate noted

5106 MAINTENANCE CHECK
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25Y-TS340E1A
341008
MASTER TOOL LIST
TEST SET, IFR offers various units

6138 TRANSPONDER/DME acceptable for testing to FAA
regulation standards.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

IFR 1

ATC600A
341008
MASTER TOOL LIST
KEY, CORRECTOR - No alternate noted

5110 SMITHS A2B COMPASS
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

CE2-40
341009
MASTER TOOL LIST
TOOL, O-RING No alternate known. Tool is

1127 REPLACEMENT (O2
SHUTOFF VALVE)
normally used with 4460102-
3 lubricant to install -1 O-ring
kit.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1
X X X X

4460102-2
350051
MASTER TOOL LIST
PURGE ADAPTER,O2 Alternate P/N units may be

4003 offered
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Puritan-Bennett 1

P4924-26H-01SA
350052
MASTER TOOL LIST
ADAPTER, FOR OXYGEN No alternate noted

5112 FUNCTION TEST
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

510057
351001
MASTER TOOL LIST
FLOWMETER, FOR Handheld flow unit used to

5113 CHECKING CREW
OXYGEN MASK
verify proper flow of Oxygen
through mask. Dwyer 5 liter
unit shown. Range should
be 0 to 5 cubic liters per
minute.
(0 to11 CFM)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

BAEREF000003243
351002
MASTER TOOL LIST
SEAL, USED W/ 510057, No substitute noted

5114 OXYGEN SYSTEM TEST
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

R2-21A5
351003
MASTER TOOL LIST
SOLDERING EQUIPMENT As required, various vendors.

3066
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Weller 1
X X X X X X X X

AS REQUIRED
390051
MASTER TOOL LIST
TERMINAL As required, various vendors.

3067 INSTALLATION
EQUIPMENT
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Daniels DMC 1
X X X X X X X

AS REQUIRED
390052
MASTER TOOL LIST
WIRE STRIPPER As required, various vendors.

3068
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Daniels DMC 1
X X X X X X X X

AS REQUIRED
390053
MASTER TOOL LIST
HOIST, A.P.U. No alternate given.

5116 (TURBOMACH)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25-8Y309-1A
490001
MASTER TOOL LIST
STAND, A.P.U. No alternate given.

5115 (TURBOMACH)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25-8Y215-1A
490003
MASTER TOOL LIST
BOARD, HORIZONTAL 1 to 700 series. No alternate

6145 STABILIZER DIHEDRAL noted
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25Y587A
510001
MASTER TOOL LIST
BOARD, HORIZONTAL 800-1000 only. No alternate

6143 STABILIZER DIHEDRAL noted.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25-8Y15-1A
510002
MASTER TOOL LIST
BOARD, WING DIHEDRAL All series. No alternate noted

6144
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25Y19A
510003
MASTER TOOL LIST
ULTRASONIC UNIT No alternate provided in

2083 manual. Updated Nortec
1000 shown
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Norton 1

NDT-12
510051
MASTER TOOL LIST
PROBE, ULTRASONIC No alternate provided.

2084 Stored in pack with Nortec
1000 shown.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Norton 1

RD-375
510052
MASTER TOOL LIST
PROBE, A. SCANNER No alternate provided

2085
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Norton 1

STO-3998
510053
MASTER TOOL LIST
VACUUM Recommended unit,

1128 VALVE/ADAPTER alternate means of vacuum
may be used if no adapter
available (i.e., taped hose
through bagging.)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Associated Industries 1

8825
510054
MASTER TOOL LIST
BOROSCOPE Flexible boroscopes of

1129 various manufactures may
be used
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Olympus 1
X X

IF-ND3-30
510055
MASTER TOOL LIST
A. SCANNER No alternate provided

2082
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Norton 1

MIA-2500
510056
MASTER TOOL LIST
TAP HAMMER No alternate provided. If

2086 inspector is trained in its use,
a proper sized coin may be
utilized.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1
X X

TS 1469
510057
MASTER TOOL LIST
CARGO DOOR LATCH No alternate shown

1130 WRENCH(CARGO DOOR
AND 1900)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1
X X

101-590052-1
520051
MASTER TOOL LIST
CARGO DOOR CLOSING No alternate provided.

2087 AID (CARGO DOOR
ONLY)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1
X X

101-590053-1
520052
MASTER TOOL LIST
KEY, WINDING - CABIN No replacement noted

5117 DOOR
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25Y1555A
521001
MASTER TOOL LIST
DRUM, TORQUE 400 to 1000 series. No

6146 LOADING - ENTRY
DOOR TENSATOR
substitute noted
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25Y1553A
521002
MASTER TOOL LIST
JIG ASSEMBLY - No alternate given. Used D-

1143 DIFFERENTIAL
MECHANISM
5726 and after.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

35-590087-1
550071
MASTER TOOL LIST
SPANNER WRENCH No alternate provided

2088
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

TK2032
550074
MASTER TOOL LIST

1141 GAUGE (MODEL 99/100)
*
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

810 115-590033
552051
MASTER TOOL LIST
ELEVATOR MODEL (90 Use of TE-100TB replaces

1134 SERIES, EXCEPT F90) *
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1
X X

810-1 50-610000
552052
MASTER TOOL LIST
ELEVATOR & ELEVATOR Use of TE-100TB replaces

1133 TRIM TAB
(F90/200/B300/1900)*
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1
X X

807 101-610000-1/-2
552053
MASTER TOOL LIST
SHAFT ASSEMBLY - No alternate given. Used D-

1144 DIFFERENTIAL
MECHANISM
2681 through D-2725.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

35-590076
552054
MASTER TOOL LIST

1131 TAB TRAVEL GAUGE
(MODEL 55/58/
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

810-1 95-524000
552055
MASTER TOOL LIST
ELEVATOR TAB (MODEL Use of TE-100TB replaces

1135 1900 UE) (Shown)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

D810-130-610000-87/-88
552056
MASTER TOOL LIST
ELEVATOR TAB TRAVEL Use of TE-100TB replaces

1136 GAUGE (90 SERIES,
EXCEPT F90)
(Shown)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1
X X

810 50-590096
552057
MASTER TOOL LIST
ELEVATOR TAB TRAVEL Use of TE-100TB replaces.

1137 GAUGE (MODEL 350) (Shown)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

810 130-610000
552058
MASTER TOOL LIST
ELEVATOR TRAVEL Use of TE-100TB replaces.

1138 GAUGE (MODEL
33/35/36) *
(Shown)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

810-3 35-660040 / -1 (LH/RH)
552059
MASTER TOOL LIST

1132 TAB TRAVEL GAUGE
(MODEL 60) *
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

807 60-610000 RH & LH
552060
MASTER TOOL LIST
ELEVATOR TRIM TAB Use of TE-100TB replaces

1142 GAUGE (MODEL
33/35/36) *
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

810 35-660043-2
552061
MASTER TOOL LIST
ELEVATOR TRAVEL Use of TE-100TB replaces.

1140 GAUGE (MODEL 90,
EXCEPT F90)
(Shown)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

810-1 50-590095
552062
MASTER TOOL LIST

1139 GAUGE (MODEL
33/35/36) *
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

810-5 35-660040 / -1 (LH/RH)
552063
MASTER TOOL LIST
RUDDER & RUDDER TAB No alternate tools or method

1145 TRAVEL GAUGE
(F90/200/300/350)
given
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

807 101-630000-1
554051
MASTER TOOL LIST
RUDDER & RUDDER TAB No alternate tools or method

1146 TRAVEL GAUGE (MODEL
60) *
given
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

807 60-630001
554052
MASTER TOOL LIST
RUDDER TAB TRAVEL No alternate tools or method

1148 GAUGE (MODEL 1900
UC)
given. Used with board
similar to shown for tab
checks.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

810-2 114-630000-1
554053
MASTER TOOL LIST

1149 GAUGE (MODEL
350/1900 UE)
given
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1
X X

810 130-630000-1
554054
MASTER TOOL LIST

1150 GAUGE (MODEL
55/58/58P)
given
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

810 96-630000-1
554055
MASTER TOOL LIST
RUDDER TAB TRAVEL MM alternate method

1151 GAUGE (MODEL
90,EXCEPTF90/99/100)
allowed for model 90 series.
Similar to unit shown.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

810 96-630000-207
554056
MASTER TOOL LIST
RUDDER TRAVEL No alternate tools or method

UE)
given. Similar to shown unit.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

D807-1 114-630000-1
554057
MASTER TOOL LIST
RUDDER TRAVEL No alternate tools or method

1153 GAUGE (1900'S,UA-UC) given
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

807 114-630000-1
554058
MASTER TOOL LIST
RUDDER TRAVEL No alternate tools or

1154 GAUGE (33/36) * methods given
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

810 33-524000
554059
MASTER TOOL LIST
RUDDER TRAVEL No alternate given except for

1155 GAUGE (MODEL
55/58/58P/90, EXCEPT
Model 90 which gives
alternate procedure in MM
F90)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1
X X

810 96-524000
554060
MASTER TOOL LIST
RUDDER TRAVEL Alternate procedure in MM

1156 GAUGE (MODEL 99/100) for model 90 only, not 99 or
100. Gauge is used to rig
rudder--tab is checked by
Maintenance Manual
measurements. Unit similar
to picture shown.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

810 115-590039
554061
MASTER TOOL LIST

1147 GAUGE (MODEL 1900 UA-
UB)
given. Used with shown unit
to check tab.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

810-1 114-630000-1
554062
MASTER TOOL LIST
OPTICAL MICROMETER No substitutes known.

1157 Measures depth of scratches
in plastic windows.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Monocle Industries 1

966A1
560051
MASTER TOOL LIST
BOLT, SLAVE BOLT FOR Local Manufacture per 56-10

5118 WINDSCREEN of MM acceptable.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

ENG17099
561001
MASTER TOOL LIST
WRENCH, HEX- 3/16 AF. Used for

6147 INTERNAL remove/install of cockpit
windscreen securing bolts
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

C.J. Fox & Sons 1

W10-06-1
561002
MASTER TOOL LIST

Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

C.J. Fox & Sons 1

W10-3-1
561003
MASTER TOOL LIST

Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

C.J. Fox & Sons 1

W10-4-1
561004
MASTER TOOL LIST
EXTRACTOR, No alternate callout. Utilized

6150 WING/FUSELAGE DRAG
SPIGOT
if needed to remove spigot
following de-mate of
wing/fuselage. 25-8Y197-1A
used with this tool.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25-8Y195-1A
570001
MASTER TOOL LIST
SPACER, SET - No alternate callout. Utilized

6151 WING/FUSELAGE DRAG
SPIGOT
if needed to remove spigot
following de-mate of
wing/fuselage. 25-8Y195-1A
used with this tool.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25-8Y197-1A
570002
MASTER TOOL LIST
WING BOLT NUT 25/32" Socket used with a

1177 TORQUE ADAPTER
25/32" EXT. WRENCH
torque adapter "dogbone"
(TS1176/D917) Torqueing
unit consists of sized socket,
TS1176/D917 "dogbone"
and s-32298 1/2" drive
square. Typical type shown.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

TS1176-7
570051
MASTER TOOL LIST
TORQUE ADAPTER No substitute given

1171
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

TK-2031/TC917
570052
MASTER TOOL LIST
WING BOLT WRENCH 15/16" long handle box end

1174 15/16" BOX END wrench
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1
X X

TK1817 922-5
570053
MASTER TOOL LIST
WING BOLT WRENCH 13/16" box end wrench

1173 13/16" BOX END alternate. Torquing unit
consists of sized socket,
square.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

TK1817 922-4
570054
MASTER TOOL LIST
WING BOLT NUT 15/16" Socket with torque

1176 TORQUE ADAPTER
15/16" EXT. WRENCH
adapter "dogbone"
(TS1176/D917) Torqueing
square.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1
X X

TS1176-10 (TS1171-10)
570055
MASTER TOOL LIST
WING BOLT WRENCH 1" 1" box end wrench, long

1175 BOX END handled
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

TK1817 922-6
570057
MASTER TOOL LIST
WING BOLT NUT TS-1176-1, TS-1171-1 or 50-

1172 TORQUE ADAPTER 590013 are acceptable
substitutes
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1
X X

50-590013-1
570058
MASTER TOOL LIST
WING BOLT NUT 3/4" short socket used with a

1178 TORQUE ADAPTER 3/4"
EXT. WRENCH
torque adapter "dogbone"
(TS1176/D917) Torquing
square. Typical type shown
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

TS1176-8 (TS1171-8)
570061
MASTER TOOL LIST
TORQUE WRENCH 1/4 Any 1/4 inch torque wrench

1188 DRIVE,0-75 IN/LBS(3
ELEMENT)
in range given
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Consolidated Device 1
X X

1751DIN
570063
MASTER TOOL LIST
WING BOLT NUT Unit no longer utilized

INT. WRENCH
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1
X X

TS1176-1
570073
MASTER TOOL LIST
WING HINGE PIN Nested guide tubes may be

1158 INSTALLATION TUBING locally made if assortment is
on hand. Tubes are 2.5 to
3.5 feet long and nest one
inside the other so as to be
collapsible
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1
X X

35-588 S
570074
MASTER TOOL LIST
FREE PLAY TESTER No alternate provided

2089
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

122-620010/934-1
570075
MASTER TOOL LIST
WING & FUSELAGE Local manufacture as

2090 CRADLES OR
EQUIVALENT
required
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1
X X X X X

AS REQUIRED
570076
MASTER TOOL LIST
WING BOLT WRENCHES 3/4 hex or Allen, offset.

2091 (BONANZAS D1-D1501)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

TS1187-1
570077
MASTER TOOL LIST
WING BOLT WRENCH 9/16" hex or Allen, TS1222-

2092 (BONANZAS D1-D1501) 4, TS1222-5 or 50-590012
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

TS1195
570078
MASTER TOOL LIST
WING BOLT NUT SPIN 7/8" hex or Allen

2093 ON WRENCHES 7/8"
INT. WRENCH
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1
X X

TS1222-1
570079
MASTER TOOL LIST
ALIGNMENT PIN LOWER "Bullet" used to guide

1186 FORWARD WING(3
ELEMENT)
installation and removal of
lower forward bolt. No
substitute recommended.
Alternate local made unit
(made from old bolt shank)
must be smooth to prevent
damage to hole bore.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

10996 PIN
570080
MASTER TOOL LIST
WING BOLT WRENCH 9/16" hex or Allen

2095 9/16" INT. WRENCH
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

TS1222-4
570081
MASTER TOOL LIST
WING BOLT NUT 13/16 Socket used with

1179 TORQUE ADAPTER
13/16" EXT. WRENCH
Torque adapter "dogbone"
(TS1176/D917) Torquing unit
consists of sized socket,
and S-32298 1/2" drive
square.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

TS1176-6 (TS1171-6)
570082
MASTER TOOL LIST
CONTROL SURFACE As required, various

3069 BALANCING EQUIPMENT vendors. Two balancing
points minimum, adjustable
width to be set for each unit
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Local 1
X X X X X X X X

AS REQUIRED
570083
MASTER TOOL LIST
TORQUE ADAPTER "Thin" wrench for use in

1187 LOWER FORWARD
WING(3 ELEMENT)
torque of lower forward bolt.
No substitute recommended
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

11001
570084
MASTER TOOL LIST
WING BOLT WRENCH 1 No substitute recommended

1185 1/16" EXT. WRENCH due to high load on this
wrench. Non-PLI washer use
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

50-590014
570085
MASTER TOOL LIST
WING BOLT WRENCH 1 Use caution due to high load

1184 1/16" EXT. WRENCH on this wrench. For PLI
washer use . Snap-on
XH134C adapter w/ 36B
Handle is acceptable unit.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

TS1584N
570086
MASTER TOOL LIST
WING BOLT WRENCH 1/2 hex. 1/2" Allen wrench

1183 1/2" INT. WRENCH may be substituted provided
it is equal strength and size
Typical type shown
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

TS1222-7
570087
MASTER TOOL LIST
WING BOLT WRENCH -5 is a Allen wrench, -4 is

1182 9/16" INT. WRENCH same as one piece wrench
and shown in photo
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1
X X

TS1222-5
570088
MASTER TOOL LIST
WING BOLT WRENCH 5/8 hex. 5/8" Allen wrench

1181 5/8" INT. WRENCH may be substituted provided
it is equal strength and size.
Typical type shown.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

TS1222-3
570089
MASTER TOOL LIST
WING BOLT NUT 7/8 hex used with Torque

INT. WRENCH
adapter "dogbone"
(TS1176/D917)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1
X X

TS1176-2 (TS1171-2, TS1222-2)
570090
MASTER TOOL LIST
WING BOLT NUT SPIN 3/4 hex or Allen

2094 ON WRENCHES 3/4"
INT. WRENCH
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1
X X

TS1222-2
570091
MASTER TOOL LIST
ALIGNMENT TOOL FOR LOCAL PRODUCE TO

1245 L.E. RIB INSTALLATION
(MYLAR DRAWING)
MYLAR
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

TBD
570092
MASTER TOOL LIST
ALIGNMENT TOOL FOR LOCAL PRODUCE TO

1246 L.E. INSTALATION
(MYLAR DRAWING)
MYLAR
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

TBD
570093
MASTER TOOL LIST
FLAP TRAVEL GAUGE Photo is representation of

1170 (MODEL 1900 UC & UE) board.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

D810 118-521046-1/-2
575052
MASTER TOOL LIST
FLAP TRAVEL GAUGE Photo show 1900 D sketch

1169 (MODEL 1900 UA & UB) as representative of board.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

D810 114-521021-1/-2
575053
MASTER TOOL LIST
FLAP TRAVEL GAUGE No alternate given

2096 (MODEL 58P/60)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

810-2 96-524000
575054
MASTER TOOL LIST
OUTBOARD WING Use Local Manufacture pin

1087 SECTOR RIG PIN shown in MM 27-20-00, page
17
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

LOCAL MANUFACTURE
576051
MASTER TOOL LIST
AILERON TAB TRAVEL No alternate tool or method

1166 GAUGE (MODEL 60) * given
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

810-1 60-130001
576052
MASTER TOOL LIST
AILERON TAB TRAVEL Use of TE-100TB replaces

1167 GAUGE (MODEL
300/350/1900UA
(Shown)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1
X X

810-1 101-130001-1
576053
MASTER TOOL LIST
AILERON TRAVEL Use of TE-100TB replaces

1165 GAUGE (MODEL
55/58/58P) *
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

810-1 35-135025-79 RH
576054
MASTER TOOL LIST

1164 GAUGE (MODEL
55/58/58P) *
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

810-1 35-135025-78 LH
576055
MASTER TOOL LIST

1163 GAUGE (1900 UC & UE) (Shown)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

810-1 118-130000-1/-3
576056
MASTER TOOL LIST

1162 GAUGE
(F90/99/100/200/300/350/1
900
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1
X X

810 99-524000 (LH & RH)
576057
MASTER TOOL LIST
AILERON TRAVEL No alternate tool or method

1161 GAUGE (MODEL 60) * given
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

810 60-130001
576058
MASTER TOOL LIST

EXCEPT F90)
(Shown)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

810-1 50-590091
576059
MASTER TOOL LIST

1159 GAUGE (MODEL
33/35/36) *
(Shown)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

810 50-590091
576060
MASTER TOOL LIST
AILERON TAB TRAVEL Use of TE-100TB replaces

1168 GAUGE (MODEL 1900 UC
& UE)
(Shown)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

810-2 118-130000-1
576061
MASTER TOOL LIST
PROP BOLT TORQUE No substitute recommended

1197 ADAPTER due to high load on this
wrench
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

TK 1980/928-1
610051
MASTER TOOL LIST
FEEDBACK RING Unit for 3 blade Hartzell

1202 PULLER - 3 BLADE propeller.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

TK1573-918
610052
MASTER TOOL LIST
PROP BOLT TORQUE No alternate given

2103 ADAPTER WRENCH
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

60-960000/D922
610053
MASTER TOOL LIST
JUNCTION BOX- No alternate given

2102 CHADWICK
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Chadwick-Helmuth 1
X X X

9110
610054
MASTER TOOL LIST
ADAPTER CABLE- No alternate given

2101 CHADWICK
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Chadwick-Helmuth 1
X X X

10390
610055
MASTER TOOL LIST
BOX HEAD (B100 No alternate given

2100 PROPELLER BOLTS)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

TK1812-3 922
610056
MASTER TOOL LIST
BOX HEAD No alternate given

2099
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Snap-on 1

SBH - 9/16
610057
MASTER TOOL LIST
BOX HEAD No alternate given

2098
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Snap-on 1

SBH - 7/8
610058
MASTER TOOL LIST
TORQUE No alternate given. Shown

2097 HANDLE(BEFORE AD 83-
08-01)
with SBH 9/16 installed.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Snap-on 1

LTC-3
610059
MASTER TOOL LIST
PROP PISTON NUT No alternate given

2096 WRENCH
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Snap-on 1

B-842
610060
MASTER TOOL LIST
WRENCH ADAPTER, 7/8" No substitute recommended

1195 due to high load on this
wrench. Similar to shown
wrench.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

McCauley 1
X X

B5588
610061
MASTER TOOL LIST
FEEDBACK RING No alternate given

2104 PULLER (McCauley)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

McCauley 1

B5109
610062
MASTER TOOL LIST
FEEDBACK RING Unit for 3 or 4 blade

1203 PULLER - 4 BLADE(NOT
UE)
acceptable if it has proper
number and placement of
rods
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1
X X

TK1573-918-1
610063
MASTER TOOL LIST
BETA RETRACTOR TOOL Unit for 3, 4 or 5 blade

1201 acceptable if it has proper
rods
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

TK-1573/D918-5
610064
MASTER TOOL LIST
FEEDBACK COLLAR Unit for 3, 4 or 5 blade

1200 RETRACTOR,4 BLADE
McCauley
acceptable with proper
rods
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Hartzell 1

D5945
610065
MASTER TOOL LIST
FEEDBACK RING Unit for 3, 4 or 5 blade

1199 PULLER - 4 BLADE (UE
SERIES)
acceptable if proper number
and placement of rods
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Hartzell 1

CST-2834-1
610066
MASTER TOOL LIST
PROPELLER WRENCH, 0- No substitute recommended

1198 600 IN/LBS due to high load on this
wrench
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Snap-on 1
X X X

TQ50A
610067
MASTER TOOL LIST
RETAINING NUT No substitute recommended

1196 WRENCH, PROP GOV. due to high load on this
unit.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Pratt & Whitney 1
Canada
X X

PWC30114-16
610068
MASTER TOOL LIST
PROP BOLT TORQUE No substitute recommended

1194 WRENCH ADAPTER due to high load on this
wrench.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

96-910002/922
610069
MASTER TOOL LIST
TORQUE ADAPTER No substitute recommended

1193 PROP BOLTS-5/8" HEAD due to high load on this
wrench
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1
X X

10113
610070
MASTER TOOL LIST
PROPELLER ACES is an acceptable

1192 BALANCING EQUIPMENT alternative, as is the
Chadwick-Helmuth Vibrex as
shown.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Chadwick-Helmuth 1
X X X X

8500 SYSTEM
610071
MASTER TOOL LIST
OSCILLOSCOPE Any dual trace oscilloscope

1191 is acceptable.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tektronix 1
X X X X

222
610072
MASTER TOOL LIST
SPACER, FEEDBACK No alternate given. 3 required

2105 RING HOLDER(McCauley)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

McCauley 1

B5149
610073
MASTER TOOL LIST
WOODWARD TYPE II 213628 is also acceptable

1189 TEST SET
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Woodward 1
X X X

213618
612251
MASTER TOOL LIST
SYNCROPHASER Local Manufacture per MM

1190 BREAKOUT BOX as alternate to manufactures
unit.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1
X X

LOCAL MANUFACTURE
612252
MASTER TOOL LIST
ADAPTER, TORQUE No alternate offered

5133 WRENCH, ALTNTR
MOUNTING
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Winstanely E.J. Eng. 1

SPL3652
710001
MASTER TOOL LIST
SLING, ENGINE For Garrett TFE731-3

6161 engine. Tronair 08-0102-
4010 May be used as
alternate
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25-7Y9A
710003
MASTER TOOL LIST
SLING, ENGINE For Garrett TFE731-5

6162 INSTALLATION/REMOVAL engine. Tronair 08-0102-
4010 May be used as
alternate
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25-8Y21-1A
710004
MASTER TOOL LIST
SLING, ENGINE For lifting Viper engine on 1

6176 to 600 series. Includes
Statimeter (0-3000 lbs. x. 20)
No alternate noted
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25Y27A
710005
MASTER TOOL LIST
SLING, ENG PWC 305 sling. Alternate

5123 INSTALL/REMOVAL vendor units may be used
(such as Tronair).
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25-9Y43-1A
710006
MASTER TOOL LIST
STAND, ENGINE LAYBY 1000 series. Alternate 25-

6165 9Y389-3A or Tronair 08-
2018-0000
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25-9Y311-1A
710007
MASTER TOOL LIST
STAND, For TFE731-3 engine. Used

6170 TRANSPORTATION
ENGINE
as shipping container
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Armour Cases Limited 1

A0BA5525
710008
MASTER TOOL LIST
STAND, For TFE731-5 engine. Used

6171 TRANSPORTATION
ENGINE
as shipping container
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines


A0BA6052
710009
MASTER TOOL LIST
STAND, ENGINE LAYBY PWC 305 stand. Tronair

5121 stand may be used
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25-9Y101-1A
710011
MASTER TOOL LIST
TEST SET, R.V.D.T. 1000 series. No alternate

6177 THRUST LEVEL given
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25YTS345E21-1A
710013
MASTER TOOL LIST
CABLE- RVDT TEST Cable used with

6206 25YTS345E21-1A Testset.
No alternate noted
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25YTS345E19-1
710014
MASTER TOOL LIST
SLING, ENGINE - USE No alternate for use with the

5119 WITH STAND PT. NO 08-
2001-0000
Engine stand noted.
Separate test stand and sling
units may be used if
available. PWC 305 engine
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1

08-0102-4000
710016
MASTER TOOL LIST
CRANE, ENGINE 12 foot height minimum,

6164 1700 lift min. Alternate
vendors meeting these limits
acceptable. Tronair 04-6150-
5010 with standard beam is
in this range
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25-8Y269-1A
710017
MASTER TOOL LIST
ADAPTER, ENGINE - TFE-731 adapter for Tronair

5129 USE WITH STAND PT.
NO 08-2001-0000
stand. No alternate offered
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1

K2112
710018
MASTER TOOL LIST
CABLE, BREAKOUT TFE731-3R-1H and TFE 731-

6169 BOX- USE W/ 51-916718-
1-1
5 series Pre-test for fuel
computer interface
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Garrett 1

918352-1-1
710019
MASTER TOOL LIST
BOX, BREAKOUT (600) 700-800 series

6167 (TFE731-3R-1H and TFE
731-5) engines Pre
installation tester on Fuel
Computer Interface
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Garrett 1

51-916718-1-1
710020
MASTER TOOL LIST
TEST BOX, J2 800 series. No alternate

6166 CONNECTOR noted
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

298219-3
710021
MASTER TOOL LIST
DRIVE-BIT, 1/4 SQ 600-1000. Any 1/4 inch drive

6173 DRIVE- 1/4" x 0.033"
BLADE TIP
with 1/4"x0.033" blade (flat
tip 1/4" socket driver)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Snap-on 1

TMC105A
710022
MASTER TOOL LIST
DRIVE-BIT, TORQUE- No Alternate provided

6160 SET (8-32UNC 1/4AF HEX
DRIVE)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

212-8
710023
MASTER TOOL LIST

DRIVE)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

212-6
710024
MASTER TOOL LIST

DRIVE)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

212-4
710025
MASTER TOOL LIST

6157 SET (10-32UNF 1/4AF
HEX DRIVE)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

212-10
710026
MASTER TOOL LIST

6156 SET (1/4UNF 1/4AF HEX
DRIVE)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

212-1/4
710027
MASTER TOOL LIST
DRIVE-BIT, 3/16Hex X No Alternate provided

6155 1/4Hex DRIVE
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

185-4
710028
MASTER TOOL LIST

6154 1/4Hex DRIVE
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

185-3
710029
MASTER TOOL LIST

6153 1/4Hex DRIVE
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

185-1
710030
MASTER TOOL LIST
STAND, THRUST Local Manufacture from 3/4"

6172 REVERSERS plywood or .080 to .125
aluminum plate. Holes in
manufactured plate should
coordinate with TR mount
bolt pattern.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines


A0BA6452
711002
MASTER TOOL LIST
STAND, USE W/ TFE 731 stand set-up

5120 ADAPTER K2112 &
SLING 08-0102-4010
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1

08-2001-0000
711003
MASTER TOOL LIST
ENDOPROBE, BASIC Used on Garrett engine.

6174 RIGID ENDOPROBE KIT Endoscope by Top-
Optic(RH) Ltd. Using Kit
TO/BA125-3EC/B. Alternate
Rigid Boroscope/ Endoscope
by various vendors with
photo capability permissible
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

TOFBKIT125
711004
MASTER TOOL LIST
CRANK, HAND - H.P. TFE-731 tool. No alternate

5126 SPOOL provided
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Airesearch 1

289816-1
720001
MASTER TOOL LIST
TOOL, SEAL No alternate offered.

5124 INSTALLATION, LIP SEAL
3020052-5
Alternate design criteria may
be offered in AiResearch
information's. TFE-731 use.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Airesearch 1

289801-1B
720006
MASTER TOOL LIST
TOOL, SEAL REMOVAL, No alternate offered.

5125 LIP SEAL 3020052-21 Alternate design criteria may
be offered in AiResearch
information's. TFE-731 use.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Airesearch 1

289808-1
720007
MASTER TOOL LIST
ENGINE SLING No alternate shown.

2115
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

50-590018
720051
MASTER TOOL LIST
OIL DRAIN TUBE No alternate given

2114
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

65-590018
720052
MASTER TOOL LIST
ENGINE SLING GARRETT Tronair unit may be used

2116
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Garrett 1

93210091002-605
720053
MASTER TOOL LIST
DIFFERENTIAL As required, various vendors.

3083 COMPRESSION TESTER
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

X X

E2
720054
MASTER TOOL LIST
SUPERCHARGER No alternative tool

2113 INSTALL TOOL(EARLY
90'S)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

50-910419-611
720055
MASTER TOOL LIST
TIT INDICATION SYSTEM 85331 Alcor unit (Alcal 2000)

1204 TEST UNIT (ALCOR) is new substitute/alternate
unit. (shown)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Alcor 1
X X

1004-1
720056
MASTER TOOL LIST
ENGINE RIGGING Used on PT6A-20 engine to

2111 TEMPLATE aid rigging
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

50-590158-25
720057
MASTER TOOL LIST
SET OF TORQUE As required, various

3088 WRENCHES (100,
1500,2500 IN/LBS
vendors. Units must be
calibrated.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Snap-on 1
X X

AS REQUIRED
720058
MASTER TOOL LIST
0-9 OUTSIDE As required, various vendors.

3087 MICROMETER"
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Starrett 1
X X X

AS REQUIRED
720059
MASTER TOOL LIST
0-1 DEPTH As required, various vendors.

3086 MICROMETER"
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Starrett 1
X X X X

AS REQUIRED
720060
MASTER TOOL LIST
CONTINENTAL MOTORS As required, various vendors.

3078 TOOLS FOR CYLINDER
REPL.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Burroughs 1
X X

AS REQUIRED
720061
MASTER TOOL LIST
ENGINE STAND - As required, various vendors.

3073 CONTINENTAL
ENGINES/EQUIV.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1
X X

AS REQUIRED
720062
MASTER TOOL LIST
ENGINE STAND - As required, various vendors.

3072 LYCOMING ENGINES
OR/EQUIV.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1
X X

AS REQUIRED
720063
MASTER TOOL LIST
SPARK PLUG CLEANING As required, various vendors.

3071 & GAPPING EQUIPMENT
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Champion 1
X X

AS REQUIRED
720064
MASTER TOOL LIST
VALVE SPRING As required, various vendors.

3075 COMPRESSOR
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Continental 1
X X

AS REQUIRED
720065
MASTER TOOL LIST
1 TO 6" MICROMETER As required, various vendors.

3076 SET (OUTSIDE)"
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Starrett 1
X X X

AS REQUIRED
720066
MASTER TOOL LIST
DIAL INDICATOR As required, various vendors.

3085
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Starrett 1
X X X X

81-111
720067
MASTER TOOL LIST
1 TO 6" MICROMETER As required, various vendors.

3077 SET (INSIDE)"
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Starrett 1
X X X

AS REQUIRED
720068
MASTER TOOL LIST
TIMING DISCS & LIGHTS As required, various vendors.

3084
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

X X

E25 AND E50
720069
MASTER TOOL LIST
HOT OIL TANK No alternate shown

2117 CONTAINING OIL
CPW202
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Pratt & Whitney 1
X X

AS REQUIRED
720070
MASTER TOOL LIST
LYCOMING TOOLS FOR As required, various vendors.

3079 CYLINDER
REPLACEMENT
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Burroughs 1
X X

AS REQUIRED
720071
MASTER TOOL LIST
DIAL INDICATOR As required, various vendors.

3080
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Federal 1
X X X

AS REQUIRED
720072
MASTER TOOL LIST
HELICOIL KIT AND No alternate noted

3081 TOOLS
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Helicoil 1
X X X X X X X X

AS REQUIRED
720073
MASTER TOOL LIST
TIME-RITE No alternate noted

3082
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Time-rite 1
X X

BC-18
720074
MASTER TOOL LIST
VERTICAL ARBOR As required, various vendors.

3074 PRESS
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Wald 1
X X X

AS REQUIRED
720075
MASTER TOOL LIST
ENGINE CLEANING As required, various vendors.

3070 EQUIPMENT
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1
X X X X X X X X

AS REQUIRED
720076
MASTER TOOL LIST
2 CALIBRATED LARGE Port a test unit is all inclusive

1213 DIAL PRESSURE
GAGES(0-30 PSI)
(gauges, valves and hoses
to equate to test with two 0-
30 PSI gauges (1 shown)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Alcor 2

PORT-A-TEST UNIT
720077
MASTER TOOL LIST
ENGINE COMPRESSOR Local manufactured units

1222 WASH ADAPTER meeting MM requirements
are acceptable. Tronair unit
P/N 08-4049-1011 shown.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1
X X

K-1152
720078
MASTER TOOL LIST
ENGINE COMPRESSOR Local manufactured units

1221 WASHER, USE WITH K-
1152 ADP.
meeting MM requirements
are acceptable. Tronair 06-
5010-6500 shown
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1
X X X

08-4049-1010
720079
MASTER TOOL LIST
ADAPTER (JT15D), USE No substitute when used

1220 WITH 08-2001-0000
STAND
with noted unit. A stand with
adapter is used in noted
photo.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1

K-2117
720080
MASTER TOOL LIST
ADAPTER (PT6A-41 - No substitute when used

1219 PT6A-65), USE WITH 08-
2001-0000
with noted unit
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1
X X X

K-2116
720081
MASTER TOOL LIST
THERMOCOUPLE No alternate given

2110 HARNESS - IAT
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1
X X

50-000065-TC935
720082
MASTER TOOL LIST
ENGINE STAND Manufactures tools are also

1217 (PT6/JT15D), USE WITH
K-2116/2117/211
acceptable, Equivalent
vendors may be
utilized.(shown)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1
X X X X

08-2001-0000
720083
MASTER TOOL LIST
FEELER GAGE No alternative given

2112
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1
X X

50-590158-5
720084
MASTER TOOL LIST
TORQUE SYSTEM 2311F shown (Barfield)

1223 PRESSURE TESTER
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1
X X

101-000000/934
720085
MASTER TOOL LIST
ENGINE SLING (PT6A - PWC tools are also

1214 PT6A-28) acceptable, Equivalent
vendors may be available.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1

08-0100-4000
720086
MASTER TOOL LIST
ADAPTER (PT6A - PT6A- No substitute when used

1218 28), USE WITH 08-2001-
0000 ST
with noted unit
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1

K-2115
720087
MASTER TOOL LIST
VU-THRU TACHOMETER Alternate vendors may be

1212 used if meeting 5% accuracy
within range
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Hartzell 1

D-4390
720088
MASTER TOOL LIST
TEST GAUGE - OIL 2% accuracy required.

1211 PRESSURE/FUEL
PRES.(0-150 PSI)
Gauge range at least 0-150
PSI. Typical sample shown
in Photo.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Barfield 1

AS REQUIRED
720089
MASTER TOOL LIST
SURFACE PLATE Any surface plate to .001 is

1210 acceptable or one arc-minute.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Ideal Aerosmith 1

AS REQUIRED
720090
MASTER TOOL LIST
OIL FILTER CUTTING Any oil filter cutter may be

1209 TOOL used. Example unit shown.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Burroughs 1

5230
720091
MASTER TOOL LIST
PROP SHAFT OIL SEAL OEM tool may also be used

1208 INSTALLER -
CONTINENTAL
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Burroughs 1

5209
720092
MASTER TOOL LIST
18 MM SPARK PLUG Any brand 18mm spark plug

1207 TAP - CONTINENTAL tap may be used
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Burroughs 1

445
720093
MASTER TOOL LIST
IGNITION HARNESS Vendor recommended units

1206 TEST EQUIPMENT may be used as alternates
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Bendix 1

11-8950-1 OR -2
720094
MASTER TOOL LIST
FLOWRATER, 20-200 No given substitute

1205 PPH, AVGAS (REF:
S/N8010A0292A1)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Fisher & Porter 1

10A4555S AVGAS
720095
MASTER TOOL LIST
ENGINE SLING (PT6A- PWC tools are also

1215 41 - PT6A-65) acceptable, Equivalent
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1
X X X

08-0102-4000
720096
MASTER TOOL LIST
ENGINE DATA No alternate given

2107 SIMULATOR
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

J.C. Air 1

01-357-00
720097
MASTER TOOL LIST
FILTER No alternate given

2109
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Kapp 1
X X

41
720098
MASTER TOOL LIST
ENGINE SLING Manufactures tools are also

1216 acceptable, Equivalent
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1

08-0114-4010
720099
MASTER TOOL LIST
TURBOCHARGER No alternate given

2108 CONTROL TESTER
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Airesearch 1

276084-1-1
720100
MASTER TOOL LIST
OIL DRAIN TUBE No noted substitutes. Local

1224 manufactured line may be
used.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1
X X X

101-930023-5
720101
MASTER TOOL LIST
BOROSCOPE No alternate given

2106 (OPTIONAL)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Olympus 1

AS REQUIRED
720102
MASTER TOOL LIST
JET CAL AND No substitute currently,

1229 ASSOCIATED
HARNESSES
model may vary due to
options on unit.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Howell Instrument 1
X X X

BH112JD-101
720103
MASTER TOOL LIST
DIGITAL THERMOMETER Omega CL-20 shown is

1228 acceptable example for
digital thermometer
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Thermo Electric 1
X X X

3117310000 PRONTO PLUS
720104
MASTER TOOL LIST
OIL DRAIN TUBE No noted substitutes. Local

1225 manufactured drain may be
used.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

114-930022-1
720105
MASTER TOOL LIST
FLOWRATOR METER Previous 60-600 range unit

1226 (80-800 LBS)SPEC GRAV
0.77/80-800
is acceptable for 90/200
series aircraft, however they
do not give full range for
300/350 series.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Fisher & Porter 1
X X

10A4555S JETA
720106
MASTER TOOL LIST
TURBINE T1000 Series units are

1227 TEMPERATURE
INDICATING SYS
acceptable substitute as is
the Jet-Cal unit
TESTER (BARFIELD)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Barfield 1
X X X

2312-G
720107
MASTER TOOL LIST
EXTENSION, STARTER- No substitute provided

1247 GENERATOR REMOVAL
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

TK2091/917
720108
MASTER TOOL LIST
WRENCH, STARTER- No substitute provided

1248 GENERATOR REMOVAL
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

TK2091/922
720109
MASTER TOOL LIST
ENGINE BLEED AIR No substitute provided

1249 BLANKING PLATE
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

TK2240/939
720110
MASTER TOOL LIST
ENGINE SLING No substitute provided

1250
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1

08-0119-0800
720111
MASTER TOOL LIST
ENGINE STAND No substitute provided

1251
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1

08-2021-0000
720112
MASTER TOOL LIST
ADAPTERS, ENGINE No substitute provided

1252 STAND
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Tronair 1

K-2032
720113
MASTER TOOL LIST
GUAGE, IGNITOR 4 POLE Used with FJ44. No

9701 Alternate tool offered
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Williams 1

TL37321
720114
MASTER TOOL LIST
LAP TOP COMPUTER MINIMUM: 75 MHz

9702 PENTIUM, 16 MEG MEM.,
640*480 VGA, 1.2 GIG
HARD DRIVE, 16550 UART,
WINDOWS 95
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

As Required 1

COMPUTER, LAPTOP
720115
MASTER TOOL LIST
TOOL, SHAFT STRETCH Used with FJ44. No

Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Williams 1

TL37102-102
720116
MASTER TOOL LIST
SOCKET, FUEL NOZZLE Used with FJ44. No

9704 ADAPTER Alternate tool offered
Replaces previous TL37212
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Williams 1

TL37330
720117
MASTER TOOL LIST
ADAPTER, TORQUE Used with FJ44. No

Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Williams 1

TL37220
720118
MASTER TOOL LIST
ENGINE ROTATION Used with FJ44. No

9706 TOOL Alternate tool offered
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Williams 1

TL37244
720119
MASTER TOOL LIST
FITTING, OIL DRAIN Used with FJ44. No

Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Williams 1

TL37255
720120
MASTER TOOL LIST
MOUNT, ENGINE Used with FJ44. No

9708 VIBRATION Alternate tool offered
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Williams 1

TL37253
720121
MASTER TOOL LIST
TORQUE ADAPTER Used with FJ44. No

9709 GEAR BOX BREATHER
VENT TUBE
Alternate tool offered
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Williams 1

TL37270
720122
MASTER TOOL LIST
WRENCH, LP SHAFT Used with FJ44. No

9710 FORWARD NUT Alternate tool offered
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Williams 1

TL99500
720123
MASTER TOOL LIST
PULLER ASSY., Used with FJ44. No

9711 SPINNER PILOT PLATE Alternate tool offered
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Williams 1

TL99501
720124
MASTER TOOL LIST
PULLER ASSY., FAN Used with FJ44. No

Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Williams 1

TL99502
720125
MASTER TOOL LIST
TORQUE ADAPTER, Used with FJ44. No

9713 FUEL DELTA P SWITCH Alternate tool offered
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Williams 1

TL39454
720126
MASTER TOOL LIST
PULLER, DRAIN TUBE Used with FJ44. No

Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Williams 1

TL65047
720127
MASTER TOOL LIST
PIN, RIGGING, ENGINE No alternate offered Found

5134 FUEL CONTROL in rig pin sets through 800
series.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25-7Y63A
730001
MASTER TOOL LIST
ADAPTER, RIGGING, No alternate offered. Found

5135 ENGINE THROTTLE
LEVER
in rig pin sets through 800
series.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25-7Y65A
730002
MASTER TOOL LIST
FUEL TEST STAND W/ No alternate given

2118 FLOW METER
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Bendix 1

AS REQUIRED
730051
MASTER TOOL LIST
SPANNER, IGNITER Used with Viper engine

6191 PLUG servicing/repair. No alternate
offered.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Rolls-Royce 1

PE28707
732001
MASTER TOOL LIST
TEST SET, ENGINE JEDA box is acceptable for

6168 (TFE731-3) some tests. 600-700 series
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Garrett 1

909932-3-1
732002
MASTER TOOL LIST
TEST SET, ENGINE JEDA 1750 Shown

5128 (TFE731-5) (alternative)
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Airesearch 1

909932-5-1
732003
MASTER TOOL LIST
POTENTIOMETER, D.C. 1-600 series. For checking

6202 TTC and JPT systems. No
alternate offered.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Kent Industrial 1
Measurement Ltd.

PP322-1
732004
MASTER TOOL LIST
BLEED TOOL, FUEL Used with Viper engine

6189 PUMP/L.P.FILTER servicing/repair. No alternate
offered.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Rolls-Royce 1

PE25368
732005
MASTER TOOL LIST
METER, MILLIVOLTS Mills Voltmeter multi-range,

6178 DC 0.06V to 3.6V (Test
requires 0.25V) Used for
checking TTC system on
Viper engines
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

HDV2A
732006
MASTER TOOL LIST
CABLE, TEST Utilized for engine TTC

6175 system checks, 600 series
aircraft with Viper engine.
No alternate noted
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25-6YTS299E1A
732007
MASTER TOOL LIST
PIPE, GEARBOX Used with Viper engine

6194 PRIMING servicing/repair. No alternate
offered.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Rolls-Royce 1

PE4484
732008
MASTER TOOL LIST
ADJUSTER, PRESSURE Used with Viper engine

6185 (P1) TO BLOW OFF VAL. servicing/repair. No alternate
offered.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Rolls-Royce 1

PE17433
732009
MASTER TOOL LIST
SPANNER, ACCESSORY Used with Viper engine

6186 GEARBOX NUTS servicing/repair. No alternate
offered.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Rolls-Royce 1

PE18599
732010
MASTER TOOL LIST
ADAPTER, MICRO Used with Viper engine

6187 PUMPS PRIMING servicing/repair. No alternate
offered.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Rolls-Royce 1

PE18600
732011
MASTER TOOL LIST
DRAIN TOOL, OIL TANK Used with Viper engine

6188 servicing/repair. No alternate
offered.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Rolls-Royce 1

PE22712
732012
MASTER TOOL LIST
RATCHET, USED WITH Used with Viper engine

6190 PE2617 OR PE28707 servicing/repair. No alternate
offered.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Rolls-Royce 1

PE2621
732013
MASTER TOOL LIST
TOOL, ELECT.PLUG Used with Viper engine

6192 ADAPTERS (SIZE A) servicing/repair. No alternate
offered.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Rolls-Royce 1

PE3424
732014
MASTER TOOL LIST
SYRINGE, GEARBOX Used with Viper engine

offered.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Rolls-Royce 1

PE4483
732015
MASTER TOOL LIST
SOCKET, EXHAUST No alternate offered. Utilized

6204 CONE REMOVAL with Viper engine
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Rolls-Royce 1

T2BJ1326SN
732016
MASTER TOOL LIST
ADAPTER, GEARBOX Used with Viper engine

offered.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Rolls-Royce 1

PE4485
732017
MASTER TOOL LIST
SOCKET, EXHAUST Used with Viper engine

6200 CONE REMOVAL servicing/repair. No alternate
offered.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Rolls-Royce 1

PE8653
732018
MASTER TOOL LIST
TOOL, ELECT.PLUG Used with Viper engine

6198 ADAPTERS (SIZE Z) servicing/repair. No alternate
offered.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Rolls-Royce 1

PE7483
732019
MASTER TOOL LIST
TOOL, TABBING Used with Viper engine

6184 GENERAL APPLICATION servicing/repair. No alternate
offered.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Rolls-Royce 1

PE17432
732020
MASTER TOOL LIST
SPANNER, DRAIN VALVE Used with Viper engine

6201 RETAINING NUT servicing/repair. No alternate
offered.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Rolls-Royce 1

PE8709
732021
MASTER TOOL LIST
SPANNER, IDLE SPEED Used with Viper engine

6196 ADJUSTER servicing/repair. No alternate
offered.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Rolls-Royce 1

PE4797
732022
MASTER TOOL LIST
SPANNER, OIL TANK Used with Viper engine

6197 CONNECTION servicing/repair. No alternate
offered.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Rolls-Royce 1

PE7390
732023
MASTER TOOL LIST
SOCKET, EXHAUST No alternate offered. Utilized

Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Rolls-Royce 1

T2BJ1040SN
732024
MASTER TOOL LIST
BLADE, EXHAUST CONE Used with Viper engine

6199 REMOVAL servicing/repair. No alternate
offered.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Rolls-Royce 1

PE7493
732025
MASTER TOOL LIST
EXTENSION, EXHAUST No alternate offered. Utilized

Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Rolls-Royce 1

T2EC3022SN
732026
MASTER TOOL LIST
ADAPTER, OIL Used with Viper engine

6183 PRESSURE FILTER
PRIMING
servicing/repair. No alternate
offered.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Rolls-Royce 1

PE17207
732027
MASTER TOOL LIST
BLEED PIPE, RATE Vickers Engine. No alternates

6179 RESET VALVE
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Rolls-Royce 1

PE11026
732029
MASTER TOOL LIST
SPANNER, FUEL PUMP Used with Viper engine

6180 MOUNTING NUTS servicing/repair. No alternate
offered.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Rolls-Royce 1

PE15841
732030
MASTER TOOL LIST
EXTRACTOR, BLOW Used with Viper engine

6181 OFF VALVE SLEEVE servicing/repair. No alternate
offered.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Rolls-Royce 1

PE16117
732031
MASTER TOOL LIST
SPANNER, OIL TANK Used with Viper engine

6182 RELIEF VALVE servicing/repair. No alternate
offered.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Rolls-Royce 1

PE1617
732032
MASTER TOOL LIST
ENGINE INLET No alternate given

2120 PROTECTIVE COVER
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Pratt & Whitney 1

CPWA-32350A
760051
MASTER TOOL LIST
THROTTLE RETAINING No alternate given

2119 NUT WRENCH
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Beech 1

35-590009
760052
MASTER TOOL LIST
MAX N1 SHIM TOOL No alternate given

2121
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Woodward 1
X X

WT-107901
760053
MASTER TOOL LIST
CALIBRATOR/THERMOM No alternate given

2122 ETER
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

CL23
770051
MASTER TOOL LIST
CALIBRATION ADAPTER B200 Tester. Local

1253 TEST BOX (MEGGITT) manufacture per 77-00-00
Page 225 in MM
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

101-380091-1/935
770052
MASTER TOOL LIST
CALIBRATION ADAPTER B300 (350) tester. Local

1255 TEST BOX- MEGGITT Manufacture per 77-00-00
p26 in MM
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

130-380042-1/935
770053
MASTER TOOL LIST
CALITRATION ADAPTER C90B Tester. Local

1256 TEST BOX- MEGGITT Manufacture per MM 77-00-
00 p234.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

90-380034-1/935
770054
MASTER TOOL LIST
TOOL, CRIMP (ITT Crimps 22-16 AWG. May be

5127 FLYING LEADS) used with TFE-731 and
PWC 305 engines
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Aircraft Marine 1
Products

46673
772001
MASTER TOOL LIST
TOOL, STRAIGHT No alternate given. Field use

5130 EDGE - RIGGING
THRUST REVERSER
may dictate a 18x .125x .375
unit as alternate temporary
edge.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Rohr 1

RSE1192
780001
MASTER TOOL LIST
PIN, T/R GROUND No alternate offered

5131 LOCKOUT CONTROL
VALVE
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Rohr 1

RSE1211
780002
MASTER TOOL LIST
ADAPTER, THRUST No alternate offered

5132 REVERSER LATCH TEST
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Rohr 1

RSE1218
780003
MASTER TOOL LIST
STAND, THRUST Local Manufactured unit with

5122 REVERSER mount holes in proper
configuration may be built
and used. Should be able to
hold minimum. Photo shown
with forklift extensions on
unit bed.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25-9Y119-1A
783001
MASTER TOOL LIST
SLING, DEE HOWARD 800 series with Dee Howard

6163 THRUST REVERSER Thrust Reversers.
Tool Picture
Series Description
2000 Beech Optional
3000 General Tools
4000 Discontinued
9000 Engines

Raytheon 1

25-8Y261-1A
783002
MASTER TOOL LIST

Tool Recognition Catalog - All Beech and Hawker Aircraft

Uploaded by

Document Informationclick to expand document information

Document Informationclick to expand document information

Copyright:

Available Formats

Tool Recognition Catalog - All Beech and Hawker Aircraft

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Tool Recognition Catalog - All Beech and Hawker Aircraft

Uploaded by

Copyright:

Available Formats

This manual applies to

Copyright ©2001 Raytheon Aircraft. All rights reserved.

Page Layout Guide

Nomenclature: Tool Name/Description

Specification or additional data: Tool specification or alternate information.

Tool Manufacture: Source ( at least one is given.)

A guide to using the Index with the

The second index is by Tool Part Number. By looking up a tool part

Note: The index has no Hyperlinks to referenced numbers

Series Reference Nomenclature Specification or Additional Data

PHOTOS AND An eclectic collection of tool

Tool Manufacturer Qty.

Tool Part Number ATA

Series Reference Nomenclature Specification or Additional Data

3 CABLE Capable of 10,000 lbs. lift

Tool Manufacturer Qty.

Tool Part Number ATA

Series Reference Nomenclature Specification or Additional Data

HOISTING EYE BOLT No substitute provided.

Tool Manufacturer Qty.

Tool Part Number ATA

Series Reference Nomenclature Specification or Additional Data

JACK, 3 POINT Two 22" jacks plus a tail

Tool Manufacturer Qty.

Tool Part Number ATA

Series Reference Nomenclature Specification or Additional Data

MAIN WHEEL AXLE Recommended for use only

Tool Manufacturer Qty.

Tool Part Number ATA

Series Reference Nomenclature Specification or Additional Data

AIRPLANE HOISTING Sling to lift entire aircraft with

Tool Manufacturer Qty.

Tool Part Number ATA

Series Reference Nomenclature Specification or Additional Data

JACK (DUKE ONLY) Alternate for standard jacks.

Tool Manufacturer Qty.

Tool Part Number ATA

Series Reference Nomenclature Specification or Additional Data

AIRPLANE HOIST Capable of lifting 22,046 lbs.

Tool Manufacturer Qty.

Tool Part Number ATA

Series Reference Nomenclature Specification or Additional Data

AIRPLANE HOISTING 33,000 lbs.(15,000 kilo) Lift

Tool Manufacturer Qty.

Tool Part Number ATA

Series Reference Nomenclature Specification or Additional Data

H. STAB. HOIST Capable of 551 lbs. (250

Tool Manufacturer Qty.

Tool Part Number ATA

Series Reference Nomenclature Specification or Additional Data

AIRPLANE HOISTING Capable of 33,000

Tool Manufacturer Qty.

Tool Part Number ATA

Series Reference Nomenclature Specification or Additional Data

AIRPLANE HOISTING Capable of 5,000 lbs.( 2273

Tool Manufacturer Qty.

Tool Part Number ATA