2008/8/27

LS-440 ( SN853 ) (for reference) GA08M00324-000

STANDARD
ELECTRIC CAPACITY LIST
CAPACITY CURRENT
ELECTRIC EQUIPMENT Qty MANUFACTURE REMARK
NO. 50Hz 60Hz 50Hz 60Hz
1 Main Motor INV 37.00 KW INV 37.00 KW 135.55 A 135.55 A 1 Toyo ED64
2 Main Motor Fan 0.07 KW 0.07 KW 0.75 A 0.90 A 1 Toyo
3 Compressor 2.20 KW 2.20 KW 9.30 A 8.80 A 1 Toshiba
4 Feeder Hoist Motor 1.80 KW 1.80 KW 9.80 A 7.80 A 1 Tsubaki emerson 2P
5 Delivery Hoist Motor 2.50 KW 2.50 KW 11.00 A 9.70 A 1 Fuji 2P
6 Spray Motor 5.54 KVA 5.54 KVA 7.50 A 8.20 A 1 Grafix Megatronic
7 Oil Pump Motor 0.40 KW 0.40 KW 2.20 A 1.93 A 1 Triple R
8 Suction Wheel Motor 0.12 KW 0.12 KW 1.80 A 1.80 A 1 Oriental Motor
9 Delivery Fans 0.12 KW 0.12 KW 0.60 A 0.60 A 32 Japan Servo
10 Dampening Motor 1.60 KW 1.60 KW 13.20 A 13.20 A 4 Nikki Denso
11
12 Ink Feed Motor 1.60 KW 1.60 KW 13.20 A 13.20 A 4 Nikki Denso
13 PQC 1.50 KVA 1.50 KVA 7.50 A 7.50 A 1 KKE
14 Impression Control Motors 0.24 KW 0.24 KW 0.80 A 0.80 A 4 Toyo
15
16 Nonstop Feeder 0.10 KW 0.10 KW 0.63 A 0.57 A 1 Tsubaki emerson
17 Feeder Pump ( P ) 4.00 KW 4.80 KW 18.20 A 20.00 A 1 Becker Centralized Cabinet Spec
18 Feeder Pump ( V ) 1.25 KW 1.50 KW 5.70 A 6.30 A 1 Becker Centralized Cabinet Spec
19 Feeder Side Blower 1.10 KW 1.30 KW 5.90 A 5.90 A 1 Becker
20 Feeder Table Blower 2.30 KW 3.40 KW 11.50 A 13.00 A 1 Fuji
21 A-Transfer Cyl. Blower 2.30 KW 3.40 KW 11.50 A 13.00 A 1 Fuji
22 Unit Blower 4.60 KW 6.80 KW 23.00 A 26.00 A 2 Fuji
23 Delivery Air Guide 0.50 KW 0.85 KW 2.40 A 3.40 A 1 Fuji
24 Delivery Air Guide 2.30 KW 3.40 KW 11.50 A 13.00 A 1 Fuji
25 Delivery Vacuum Wheel 2.30 KW 3.40 KW 11.50 A 13.00 A 1 Fuji
26 Delivery Sheet Decurler 0.55 KW 0.85 KW 3.10 A 3.70 A 1 Fuji
27 Cabinet Fan 0.51 KW 0.66 KW 3.30 A 3.60 A 6 Fuji Centralized Cabinet Spec
28 Delivery Upper Five Air Blower 2.30 KW 3.40 KW 11.50 A 13.00 A 1 Fuji Option
29 Delivery Vacuum Plate 0.55 KW 0.85 KW 3.10 A 3.70 A 1 Fuji Option
30 Feeder Lateral Control 0.04 KW 0.04 KW 0.60 A 0.60 A 1 Japan Servo Option
31 Suction Feeder Fan 0.05 KW 0.05 KW 0.26 A 0.26 A 6 Japan Servo Option
32
33 Air Side Lay Pump 2.20 KW 2.20 KW 10.40 A 10.00 A 1 Orion Option
34 Feed Roller Air 2.20 KW 2.20 KW 10.40 A 10.00 A 1 Orion Option
35
Total 83.84 KW 93.89 KW 357.69 A 369.01 A
Voltage, Frequency 3 Phase AC200/220V,50/60HZ Earthing
Spec Standard ( Including JIS , CE ) Remark
Type of Main Braker EA403B / 400
Capacity of Main Braker 400AF / 400AT
( 300mm2 x 3 ) PVC
Cable Size[Referene] JIS B 9960-1:1999 , IEC60204-1:1997
G ( 150mm2 x 1 )
Transformer 120KVA ( 5AA0004822 )

1)Necessary another power supply from customer for following devices.

・Ink rollers cooling ・Ink fountain temperature control ・Dampening Circulator etc…

2)Above total capacity and current are value during printing condition.

N 3)Earth leakage breakers installed on a dedicated power supply should be of medium sensitivity.
o (Setting should be around 500 mA.)
t Use the device which is designed not to sense the harmonic current.
e
4)A phase advancing condenser cannot be dedicated to the Lithrone series presses.
Customers wishing to fit one should consult our technical staff.

5)The Electrical Wire Diameter is a reference. It changes as the usage of electric wire and the Execution method, etc.
(customers arrangements and execution)

1/1