ROEVER ENGINEERING COLLEGE

(Approved by AICTE, New Delhi and Affiliated to Anna University, Chennai)

(Inclusion under Sections 2(f) and 12 (B) of the UGC Act, 1956)
ELAMBALUR, PERAMBALUR – 621 220

Department of Electronics & Communication Engineering

Report

Certified Add on Course

“Developing IOT Stabilization”

2023-2024 (EVEN)

PROGRAM MEMBER HOD PRINCIPAL

 Contents

S.No Description Page Number Check list

1 Approval Letter

2 Circular

3 Invite Request Letter

4 Invitation & Agenda

5 Hindu Engagement News

6 Brochure & Course content

7 Guest Profile

8 Attendance Sheet

9 Report with photos

10 Students Feedback

11 Sample certificates

12 Honor Letter

13 News Paper Report

 APPROVAL LETTER

10.02.2024
FROM
M.Surya, AP (Sr.G)
Department of Electronics & Communication Engineering,
Roever Engineering College,
Perambalur.

TO
The Principal,
Roever Engineering College,
Perambalur.

Respected Sir/Madam,

Sub: Seeking permission for conducting Certified Add on course “Developing IOT Stabilization” – Reg.,

We have planned to conduct a certified Add on Course “Developing IOT Stabilization” for III &
IV year ECE students which will be conducted by “LIFT INDIA, TRICHY” during EVEN semester of
the academic year 2023-24 . This Add on course will be very much helpful for the students to enhance their
technical knowledge in the field of internet of Things. So, we kindly request you to permit us for above
mentioned.
Thanking you,

Yours faithfully,
Place: Perambalur
Date: 10.02.2024
 ROEVER ENGINEERING COLLEGE
(Approved by AICTE, New Delhi and Affiliated to Anna University, Chennai)
(Inclusion under Sections 2(f) and 12 (B) of the UGC Act, 1956)
ELAMBALUR, PERAMBALUR – 621 220

Department of Electronics & Communication Engineering

DATE: 10.02.2024

CIRCULAR

This is informed that the Add-on Course titled “Developing IOT Stabilization” has been
arranged to the ECE IV Year students during the EVEN semester of 2023-24 academic year. Hence all the
students are advised that, attend the course without fail.

PROGRAM MEMBER HOD PRINCIPAL

Copy to:
Main Notice Board
Department Notice Board
For Information:
The Chairman
The Secretary
The Trustee
The Principal
 ROEVER ENGINEERING COLLEGE
(Approved by AICTE, New Delhi and Affiliated to Anna University, Chennai)
(Inclusion under Sections 2(f) and 12 (B) of the UGC Act, 1956)
ELAMBALUR, PERAMBALUR – 621 220

Date: 09.02.2024

Hindu Engagement News

PROGRAM MEMBER HOD PRINCIPAL

 LIFT INDIA (Sample)
Life Intensive Formation of Trust
Authorized Industrial Training Institute

Workshop / IPT / Internship / Value Added Course

Reg. by Govt. of India. Reg. No: 666/08 Educational Trust
act.1882. An Unite of MeCons Technologies PVT Ltd
No:1, KKR Building, SRC College Road, Chathram Bus Stand, Trichy – 620 002 Cell - 8754144567
_____________________________________________________________________________

To 11-03-2023
The principal, Trichy - 2

Respected Sir / Madam,

Sub: Value Added Course on Internet of Things (IoT)

(for BE, B. Tech, ME, M. Tech. to all department Students)

100% Hands on Training

In Continuation to the above subject we the LIFT INDIA would like to introduce ourselves as a Non
government, Non Profitable Secular development Organization having its training centre with well
equipped Lab facilities in Trichy, since 1985. As we have expatriation in many areas we would initially
like to take up the above mentioned training course at the ease of your students for which an approval
from your end is sought.

A complete detail are regarding the training with terms are attached herewith for your necessary
action.

May we have an appointment in advance with you to prove us at your ease.

Hope you do the needful, LIFT will always remain indebted

Thanking you,

With Best Regards,

T. Malvino M.E (Embedded Systems)

 IoT
Internet of Things Using Arduino (Node MCU)
(for BE, B. Tech, ME, M. Tech. to all department Students)

5 Full days (40 Hours) 100% Hands on Training

Objective:
This Value Added Course focuses on hands-on IoT concepts such as Sensing, actuation and
communication. It covers the development of Internet of Things prototypes including devices for Sensing,
Actuation, Processing, and Communication to help you develop skills and experiences. The Internet of
Things is the next wave, world is going to witness. Today we live in an era of connected devices the future is
of connected things.

Internet of Things, the characteristics of devices and applications in IoT ecosystem, building
blocks of IoT, Various technologies making up IoT ecosystem, IoT levels, IoT design methodology, The
Physical Design - Logical Design of IoT, functional blocks of IoT and Communication Models.

Working of Controlled Systems, Real-time systems with feedback loop e.g. Thermostat in
Refrigerator, AC, etc. Connectivity models TCP-IP versus OSI model, different type of modes using wired
and wireless methodology, the process flow of an IoT application.

Sensor measuring physical quantities in digital world eg. Light Sensor, Moisture Sensor,
Temperature Sensor, etc. Actuator moving or controlling system eg. DC motor, different type of actuators
Controller, role of microcontroller as gateway to interfacing sensors and actuators, microcontroller vs
microprocessor, different type of microcontrollers in embedded ecosystem.

100%Hands on Training TRAINING SCHEDULE:

Day – 1 8.45 am

 Welcome address
 Introduction to IOT
 Arduino Simulation Environment
 Basic Networking with ESP8266 Wi-Fi module
 IoT Protocols
 IOT Architecture and protocols
 Various Platforms for IoT
 Real time Examples of IoT
 Overview of IoT components and IoT Communication Technologies
 Challenges in IOT
 Arduino Uno Architecture
 Setup the IDE, Writing Arduino Programme.
 Arduino Libraries

Day – 2 8.45 am (All students should bring their Laptop in the LAB.)

 Basics of Embedded C programming for Arduino

 Interfacing LED, push button and buzzer with Arduino
 Interfacing Arduino with LCD
 M2M vs. IOT
 Communication Protocols
 Cloud Platforms for IOT
 Virtualization concepts and Cloud Architecture
 Cloud computing, benefits
  Cloud providers & offerings
 Study of IOT Cloud platforms
 Interfacing ESP8266 with Web server.
 Sensor & Actuators with Arduino
 Sensors working
 Analog and Digital Sensors

Day – 3 8.45 am (All students should bring their Laptop in the LAB.)

 Interfacing of Temperature, Humidity, Motion, Light and Gas Sensor with Arduino (NodeMCU)
 Interfacing of Actuators with Arduino.
 Interfacing of Relay Switch and Servo Motor with Arduino
 Arduino UNO Board and Components
 Installing and work with Arduino IDE
 Blinking LED sketch with Arduino
 Simulation of 4-Way Traffic Light with Arduino
 Using Pulse Width Modulation
 LED Fade Sketch and Button Sketch
 Analog Input Sketch (Bar Graph with LEDs and Potentio metre)
 Digital Read Serial Sketch (Working with DHT/IR/Gas or Any other Sensor)
 Working with Libraries in Arduino
 Spinning a DC Motor and Motor Speed Control Sketch
 Working with Shields

Day – 4 8.45 am (All students should bring their Laptop in the LAB.)

 Network Devices in detail

 Network IP and basic network command and network configuration commands
 Wired and Wireless network scenario creation.
 Simulation of Four Node Point To Point Network
 Transmission of Ping Message
 Implement various Topologies
 Study of Routing Protocols.
 Study of performance of MAC Protocols
 UDP and TCP Simulation
 Call establishment in cellular network.
 Handover in cellular network.
 Performance Comparison of TCP and UDP using NS

Day – 5 8.45am (All students should bring their Laptop in the LAB.)

 IoT Concepts & Hardware

 IoT and SCADA
 IoT and M2M
 IoT and Big Data
 IoT Standards
 Requirement of international standard
 IoT standards in practice.
 Operating platforms /systems
 Components of IoT System.
 Design of IoT systems
 Development of prototypes.
 Relevance of IoT for the future.
 IoT in everyday life
 Internet of Everything
 IoT and Individual Privacy
  IoT Applications.
 Intelligent Traffic systems
 Smart Parking
 Smart water management
 IoT for smart cities
 IoT for health services.
 IoT for financial inclusion.
 IoT for rural empowerment.
 Challenges in IoT implementation.
 Big Data Management.
 Connectivity challenges.
 Critical Applications.

After Completion of the Course, the Students will be able to

1. Understand how connected devices work together to update other applications
2. Acquire knowledge to interface sensors and actuator with microcontroller based Arduino platform
(NodeMCU)
3. Writing C programs in Arduino IDE(NodeMCU)
4. Understand the Communication between microcontroller and PC using serial communication
5. Build IoT based applications and understand how data flows between things
6. Understand how electronic devices control electrical appliances working at 220v AC
7. Understand the security aspect of IoT devices
8. Enhance skill set towards better personality development

(Or)
COURSE CONTENT

S.No Content
1 INTRODUCTION TO CAE
2 GENERAL PROCEDURE INVOLVED IN FEA
3 GUI OF ANSYS WORKBENCH
4 WORKING ON A PROJECT
5 CAD MODELING USING ANSYS WORKBENCH
6 DEFINING AND ASSIGNING MATERIALS
7 GENERATING THE MESH
8 OPTIMIZING THE MODEL TO REFINE MESH
9 WORKING WITH DIFFERENT BOUNDARY CONDITIONS
10 SURFACE STRUCTURAL ANALYSIS
11 MODEL ANALYSIS
12 THERMAL ANALYSIS
13 COUPIED FIELD
14 POST PROCESSING
 Resource Person (Bio Data)/Company Profile
LIFT INDIA
Life Intensive Formation of Trust
Authorized Industrial Training Institute

Industrial workshop / IPT / Internship / Value Added Course

Reg. by Govt. of India. Reg. No: 666/08 Educational Trust act.1882.
An Unite of MeCons Technologies PVT Ltd
No:1, KKR Building, SRC College Road, Chathram Bus Stand, Trichy – 620002 Cell- 8754144567

LIFT INDIA would like to introduce ourselves as a Non government, Non Profitable Secular
development Organization having its Training centre with well equipped Lab facilities in Trichy, since 1985.
Mr. K.C. Tamil Venthan is a Managing Director in the Company. Mrs. T. Jayanthi M.A., B.Ed, is a Admin.
Mr. T.Malvino ME is a Technical Head.
We are associate with

1. K Ramakrishnan College of Engineering, Samayapuram, Trichy.

2. K Ramakrishnan College of Technology, Samayapuram, Trichy.
3. Dhanalakshmi Srinivasan College of Engineering, perambalur.
4. Srinivasan Engineering College, perambalur.
5. Dhanalakshmi Srinivasan institute of Technology, Samayapuram, Trichy.
6. MAM College of Engineering, Siruganur, Trichy.
7. MAM School of Engineering Siruganur, Trichy.
8. MAM College of Engineering & Technology, Siruganur, Trichy
9. Shivani Engineering College, Navallur, Trichy.
10. JJ College of Engineering & Technology, Navallur, Trichy.
11. PERI College of Engineering, Tambaram, Chennai.
12. Gojan School of Business and Technology, Redhills, Chennai.
13. Excel College of Engineering, Komarapalayam, Namakkal, Salem.
14. Excel College of Engg. & Technology, Komarapalayam, Namakkal.
15. Jayalakshmi Institute of Technology, Thoppur, Dharmapuri.
16. PET Engineering College, Valliyur, Tirunelveli.
17. AMET University, ECR road, Chennai.
18. Indra Ganesan College of Engineering, Manikandam, Tiruchirappalli,
19. Jayaram college of Engg. & Tech, Pagalavadi, Tiruchirappalli.
20. Jayam College of engineering, Dharmapuri.
21. Sri Angalaman College of Engg. & Technology, Siruganur, Trichy.
22. OXFORD Engineering College, Pirattiyur, , Trichy.
23. SKP Engineering College, Chinnakangiyanur, Tiruvannamalai.
24. Pavendar Bharathidasan College of Engg. & Tech. Mathur, Tiruchirappalli.
 25. Trichy Engineering College. Konalai, Tiruchirappalli.
26. Mahathma college of Engg. & Tech. Sithannavasal, pudukkottai.
27. Roever College of Engineering, Perambalur.
28. Tamil Nadu Police Training Center, Technical cell, Santhome, Chennai.

Value added courses (Hands on Training)

1. Embedded Systems
2. Internet of things (IOT)
3. Industrial Automation (PLC)
4. PCB Design & Fabrication
5. Robotics
6. AI & Data Science.
7. Big Data
8. SCADA Developments.
9. Autodesk Fusion 360
10. HMI Configuration & Programming
11. Electrical CAD designing.
12. e-bike, e-CAR Design & Assembling with live demo.
13. Innovative Electronics
14. Power Electronics
15. Computer Hardware Technology
16. Creative Memory Power (personality developments)

To work in a challenging and dynamic environment in which I can utilize my abilities and Experience in
HTML-5/CSS-3, JavaScript to deliver exceptional customer experiences. Adept at contributing to a highly
collaborative work environment, finding solutions, and determining customer satisfaction.

Having over all 3 Year Experience in the IT Industry

Web Developer

 Comprehensive knowledge of HTML, XHTML, CSS, JavaScript, HTML5 and CSS3.

 Creating websites that are user-friendly, effective and appealing.
 Creating quality web pages.
 Establishing the purpose of the website based upon its target audience.
 Aware of international web standards and protocols.
 Testing a website & identifying bugs & technical problems.
 System Administrator in Autointelli systems PVT LTD, Chennai
 Perform system monitoring, capacity, patch and performance management.
 Responsible for the health of enterprise monitoring tools and infrastructure such as:
Service Management, Network Management, Hardware Management.

IoT Service Engineer in Sigma Computing Solution (I) PVT LTD, Hyderabad.

 Working knowledge on IoT Strategy, standards, protocols.

 Design and oversee development IoT platform ecosystem including edge sensors, IoT
cloud services such as data ingestion, device provisioning, analytics and orchestration.
 Hands on experience with constrained devices such as Arduino, Raspberry PI, ARM.
 PCB Designing.

KNOWLEDGE OF

 Website design.

 Front end coding.

 Fireworks.

 Trouble shooting.

 Mobile devices.
 E-commerce.

 Creating quality web pages.

 Creating websites that are user-friendly, effective and appealing.

 Testing a website & identifying bugs & technical problems.

 Developing cross-browser and cross-platform compatible solutions.

 Ability to read and understand script languages.

KEY COMPETENCIES

 Providing innovative new ideas and solutions to problems.

 Able to juggle priorities and multiple projects.
 Learning new technologies and keeping abreast of markets developments.
 Having creativity and imagination.
 Adaptable and able to pick up new techniques.
 Thorough and precise.

Thanking you,
With Best Regards,
T. Malvino M.E (Embedded Systems)
 ROEVER ENGINEERING COLLEGE
(Approved by AICTE, New Delhi and Affiliated to Anna University, Chennai)
(Inclusion under Sections 2(f) and 12 (B) of the UGC Act, 1956)
ELAMBALUR, PERAMBALUR – 621 220

Brief - BIO - DATA

Name : B.RAVISANKAR
Designation : Professor and Head
Department : Metallurgical and Materials Engineering
National Institute of Technology
Tiruchirappalli - 620 015
Qualification
1) 1988 Completed Under graduation from Govt. College of Engineering, Salem - 636 011 specialised in
Metallurgy with First Class.
2) 1992 Completed Post graduation from Madras Institute of Technology, Anna University Campus, Madras
specialised in Production with First Class with Distinction.
3) 2004 completed Ph D from Bharathiar University Title "Diffusion Bonding Studies in Superplastic,
Super-plastic like and Non superplastic materials"
4) Post doc 2007 at KAIST, South Korea
Experience : 35 Years in Teaching and Research
Publications
International journals : 92
One in Nature Scientific reports - N. Thiyaneshwaran, K. Sivaprasad and B. Ravisankar, “Nucleation and
growth of TiAl3 intermetallic phase in diffusion bonded Ti/Al Metal Intermetallic Laminate” Nature –
scientific reports (2018) 8:16797, DOI:10.1038/s41598-018-35247-0
National Journals : 10
International Conference : 21
National Conferences : 24
Books : 08
Ph.D Guidance : 10 (Completed) + 04 (In Progress)
M.S (By Research) Guidance : 03
Seminars/ Conferences conducted : 13
Sponsored Project : 20 (Total Value Rs: 491.386 lakhs)
In the areas of diffusion bonding, Equal Channel Angular pressing, Metal intermetallic laminates,
Simulation studies of metal forming processes, Bio materials
Guest Lecture Delivered : 57
Foreign countries visited : Five– South Korea, Switzerland, UAE, Russia and Taiwan
Membership in professional bodies : 10
 ROEVER ENGINEERING COLLEGE
(Approved by AICTE, New Delhi and Affiliated to Anna University, Chennai)
(Inclusion under Sections 2(f) and 12 (B) of the UGC Act, 1956)
ELAMBALUR, PERAMBALUR – 621 220

Department of Electronics & Communication Engineering

Students Attendance List

Academic Year :
Year/Dept :
Course Title :
Resource Person :
Course Duration & Date :
Total Students Enrolled :

DATES
S.NO. REG.NO. STUDENT NAME
15.02.24 16.02.24 15.02.24 15.02.24 15.02.24

PROGRAM MEMBER HOD PRINCIPAL

 ROEVER ENGINEERING COLLEGE
(Approved by AICTE, New Delhi and Affiliated to Anna University, Chennai)
(Inclusion under Sections 2(f) and 12 (B) of the UGC Act, 1956)
ELAMBALUR, PERAMBALUR – 621 220

DEPARTMENT OF ELECTRONICS & COMMUNICATION ENGINEERING

Date: 14.10.2023
ONE DAY WORKSHOP ON PCB DESIGN AND FABRICATION (12.10.2023)
REPORT

Name of the Activity One Day Workshop on PCB Design & Fabrication
Name of the NAAC
Criterion 5/ Student Support & Progression
Criterion
Criterion 2/ Program Curriculum and Teaching Learning Processes
Criterion 4/ Course Outcomes & Program Outcomes
Name of the NBA Criterion
Criterion 7/ Continuous Improvement
Criterion 9/ Student Support Systems
1. Understand the basics of PCB designing
Outcome 2. Apply techniques, skills and modern tools for designing and
fabrication of PCBs.
Program Outcomes
PO1, PO3, PO5, PO6, PO9, PO11, PO12
Covered
Organized by Department of Electronics and Communication Engineering
Mr. K.C.Tamil Venthan,
Resource Person
Director, Industrial Training Centre, LIFT India, Trichy.
Date 12.10.2023
Duration 10.00 am – 4.30 pm
Venue Dennis Ritchie Lab, REC
Number of Students
59
Participated

The Department of Electronics and Communication Engineering was organized a One Day
Workshop On “PCB Design and Fabrication” for Second year ECE Students on 12.10.2023. The function
was inaugurated by Honorable Chairman Dr. K.Vadharaajen, Roever Group of Institutions, Dr.
M.Periyasamy Principal In charge delivered the Presidential address, Dr.Kalaiselvan Professor and Head
gave Felicitation address and Mr. T.Azhagesvaran Program Coordinator given the welcome address.
The workshop was aimed to provide knowledge about complete PCB Designing using simulation
tool to test electronics circuit in software environment and also its fabrication. Mr. K.C.Tamil Venthan,
Director of Industrial Training Centre, LIFT India, Trichy, have executed the workshop appreciably to make
it successful to enhance the students skill level. This workshop will be helpful for students for circuit
development of their final year project. Totally 59 students and 12 faculty members have participated in this
workshop, where every student got a chance to work individually on a separate PCB.
 Following Contents are covered in the workshop:
 Schematic Design
 Component Footprint Design
 PCB Design & Routing
 Etching of PCB
 Soldering of Components on to PCB.
The vote of thanks & concluding speech to motivate the student to participate in such workshop
was given by Mrs. R.Janaki, Assistant Professor of ECE department.
GLIMPSES OF THE WORKSHOP
 Program Member HOD/ECE PRINCIPAL
Mr.T.AZHAGESVARAN, Dr. K.KALAISELVAN, Dr. J.WILLIAM
Assistant Professor/ ECE Professor and Head . Principal/REC
 ROEVER ENGINEERING COLLEGE
(Approved by AICTE, New Delhi and Affiliated to Anna University, Chennai)
(Inclusion under Sections 2(f) and 12 (B) of the UGC Act, 1956)
ELAMBALUR, PERAMBALUR – 621 220

Workshop Feedback Form

DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

Event Name:

Event Venue: Date:

Name of the Participant:

Please respond to the following questions by using the rating scale below:

1 2 3 4
Excellent Good Fair Poor

1 This Workshop was well organized 1 2 3 4

2 The Presenter were Knowledgeable 1 2 3 4
3 The material was Presented in an interesting manner 1 2 3 4
4 Location/venue was appropriate for the Event 1 2 3 4
5 How useful did you think event was for you? 1 2 3 4
I would strongly recommended the presenter to be invited to conduct
6 this 1 2 3 4
workshop again
Would you like to attend any further Conference /Seminar /Training
7 1 2 3 4
Courses?

Any other comments:

PROGRAM MEMBER HOD PRINCIPAL

ROEVER ENGINEERING COLLEGE
(Approved by AICTE, New Delhi and Affiliated to Anna University, Chennai)
(Inclusion under Sections 2(f) and 12 (B) of the UGC Act, 1956)
ELAMBALUR, PERAMBALUR – 621 220

Sample certificate
ROEVER ENGINEERING COLLEGE
(Approved by AICTE, New Delhi and Affiliated to Anna University, Chennai)
(Inclusion under Sections 2(f) and 12 (B) of the UGC Act, 1956)
ELAMBALUR, PERAMBALUR – 621 220

Date: XX.XX.XXXX

Dinamalar Newspaper Report