Scribd Logo
Upload

Welcome to Scribd!

  • 4 views

    Veo 16:64 Inspection Report: Software: 3.17.11, Unit Serial #: I005091

    Uploaded by

    diego cima

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Veo 16:64 Inspection Report: Software: 3.17.11, Unit Serial #: I005091

    Uploaded by

    diego cima
    4 views2 pages

    Original Title

    21 H

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    4 views2 pages

    Veo 16:64 Inspection Report: Software: 3.17.11, Unit Serial #: I005091

    Uploaded by

    diego cima

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Veo 16:64 Inspection Report

    Software: 3.17.11, Unit serial #: I005091


    Component Config File Name File Vers. Operator Procedure Ref Inspection Date
    21 HORNO TEQ.utcfg 10 R GONGORA UT 01 2024-07-04 10:33

    S1 - Sectorial PE Gain G1 ^ %FSH G1 ^ ⇓⊻ G2 ^ %FSH G2 ^ ⇓⊻ G1-G2 ^ ⇘


    25.3 dB -- -- -- -- --

    Legend : Inspection Info Encoder Info


    Abbrev. Description Target Enc. Rate Mid Encoding Setup Time Based
    BPL Path Length Voltage Phased Ar. 100 V
    Part Info
    D Depth Probe 1 [Freq, Mod... 5.00 MHz, Sonatest-T1-PE-5.0M32E...
    Material Steel
    SD Surface Dist. Wedge 1 [Velo, Mo... 2.330 mm/µs, Sonatest-T1-35W0D-...
    Velocity [LW/SW] 5.890 mm/µs, 3.329 mm/µs
    A Amplitude
    Part Geometry Plate
    L Length
    Thickness 21.00 mm
    DLT Delta
    Weld Single V
    *[Smoothing, Sub-Sampling]

    Scan S1 - Sectorial PE Value


    Signal Processing* High, Auto: 1:4
    Digital Filter Auto: 5.0 MHz
    Gain , Ref 25.3 dB, 25.3 dB
    Focal [Type, Dist] Constant Depth, 15.00 mm
    Start/Stop Path 0.00 mm, 110.00 mm
    Start/Stop Angle 40.00°, 75.00°
    Max PRF 1365 Hz
    Acq. Freq. 100 MHz

    21 HORNO TEQ_0001 J2 180-225.pdf Page 1


    Veo 16:64 Inspection Report
    Software: 3.17.11, Unit serial #: I005091
    Inspection
    Probe Qty 1 Alarms Off Operator R GONGORA
    Scan Qty 1 Encoded Axis Ref. Wedge Reference Qualification II
    Voltage Phased Ar. 100 V Job/Customer TEQUENDAMA Procedure Ref UT 01
    Target Enc. Rate Mid Site SUESCA Couplant ULTRAGEL

    Part
    Material Steel Velocity LW 5.890 mm/µs Weld Root Gap 2.00 mm
    Condition PLATE Velocity SW 3.329 mm/µs Weld Top Bevel Width 24.00 mm
    Temperature 20.0°C Cal. Block Serial # J10160 Weld Face Left 1.95 mm
    Component N/A Cal. Block Type PACS Weld Top Left Width 12.00 mm
    Serial # N/A Cal. Block Sensibility Ref. 1 64 Weld Top Left Angle 30.00°
    Location Ref SUESCA Rejection Criteria ASME V Weld Top Left Height 19.05 mm
    Part Geometry Plate Velocity SW 3.329 mm/µs
    Thickness 21.00 mm Weld Single V

    Probe P1 - Phased-Array 1D
    Probe Type Phased-Array 1D Elmt Size Dim 1 0.76 mm Elmt Pitch Dim 1 0.80 mm
    Manufacturer Sonatest Pulse Type Square-Wave Elmt Offset Dim 1 3.20 mm
    Model # Sonatest-T1-PE-5.0M32E0.8P Pulse Width 100.00 ns Elmt Offset Dim 2 8.60 mm
    Serial # 0810-5274-16A First Elmt Pin # 1 Element Layout Bottom Left Row
    Frequency 5.00 MHz Nb Elmt Dim 1 32 Elmt Size Dim 2 12.00 mm

    Wedge P1 - Phased-Array 1D
    Type Angular Back Height 6.00 mm Roof Angle 0.00°
    Manufacturer Sonatest Cut Angle 35.00° Probe Back Dist 2.50 mm
    Model # Sonatest-T1-35W0D-REXO Front Height 28.80 mm Probe Side Dist 1.00 mm
    Serial # N/A Width 31.00 mm Probe Inset 0.00 mm
    Contact Surface Planar Length 54.00 mm Wedge Velocity LW 2.330 mm/µs

    Scan S1 - Sectorial PE
    Type Sectorial PE Max PRF 1365 Hz Last Elmt RX 15
    Gain , Ref 25.3 dB, 25.3 dB Signal Rectification Full Beam Qty. 71
    Resolution 0.50° Digital Filter Auto: 5.0 MHz Sample Qty. 1656
    Start Angle 40.00° Sub-Sampling Auto: 1:4 Path Res. 15.1 spl/mm
    Stop Angle 75.00° Rejection Disabled Acq. Freq. 100 MHz
    Start Path 0.00 mm Smoothing High Velocity Cal Status Accepted
    Range Path 110.00 mm Contouring No Wedge Delay Cal Status Accepted
    Stop Path 110.00 mm Probe TX/RX P1 - Phased-Array 1D Sensitivity Cal Status Accepted
    Zero 1.28 µs Probe RX P1 - Phased-Array 1D Amp Tolerance 10.00%
    Wave Mode SW 3.329 mm/µs First Elmt TX 1 TCG Cal Status Accepted
    Travel Mode Half Path Last Elmt TX 15 Amp Tolerance 5.0%
    Focal Mode Constant Depth nbElementsUsedTx 15
    Focal Dist 15.00 mm First Elmt RX 1

    Geometry
    W1 Index Off. -30.00 mm W1 Rotation 90.0°
    W1 Scan Off. 0.00 mm

    21 HORNO TEQ_0001 J2 180-225.pdf Page 2 (End)

    You might also like