5/2-Directional Valve, Series CD07
5/2-Directional Valve, Series CD07
5/2-Directional Valve, Series CD07
Materials:
Housing Die cast zinc; Polyamide, fiber-glass reinforced
Seals Acrylonitrile Butadiene Rubber
Technical Remarks
■ The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result!
■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.
■ The oil content of compressed air must remain constant during the life cycle.
■ Use only the approved oils from AVENTICS, see chapter „Technical information“.
24 V - - 5776620220
G 1/4 Namur base plate G 1/4 M5
- 230 V 230 V 5776625280
Supplementary products
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2015-03-04, ©AVENTICS S.a.r.l., subject to change
2
Directional valves ► Supplementary products
Part No. Power Holding Holding Switch-on Switch-on Flow rate value Switch-on Switch-off
consump- power power power power time time
tion
24 V DC AC 50 Hz AC 60 Hz AC 50 Hz AC 60 Hz Qn Qn Qn tF tE
1▶2 2▶3
[W] [VA] [VA] [VA] [VA] [l/min] [ms] [ms]
5776620220 2.1 - - - -
1200 1200 1200 21 21
5776625280 - 4.8 4.1 6.9 5.8
5776625302 - - - - - 1200 1200 1200 - -
[kg]
5776620220
IP65 0.8 -
5776625280
5776625302 - - 1); 2)
1) Basic valve without coil
2) ATEX optional
Nominal flow Qn at 6 bar and Δp = 1 bar
HHB = Manual override
Dimensions
D577_662
1) after removal of cap M 5 internal thread 2) threaded pin DIN 914 M5 x 20 3) O-ring 16 x 2 (included)
Supplementary products
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed informa-
tion
Pneumatics catalog, online PDF, as of 2015-03-04, ©AVENTICS S.a.r.l., subject to change