0% found this document useful (0 votes)
33 views9 pages

V100MD User Manual

V100MD Manual

Uploaded by

wfmiller02
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
33 views9 pages

V100MD User Manual

V100MD Manual

Uploaded by

wfmiller02
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

En zen

iDigital

Tablet PC
Model: V100MD

Diamondking Inc.
3913 schaefer Ave.Chino,CA91710
Toll free:(866)709-1999
Contents Disclaimer
1. Thanks ver y much for purchasing our MID product! Before using this
1 Over view 1 product, please read the manual carefully.
We will consider that you have read this manual when you use this
1.1 Appearance and Keys 1
product.
1.2 Basic Operation 1 2. The functions information of this manual is subject to the product
itself ; we will keep developing new functions. The information in this
1.2.1 Switch ON 1 manual is subject to change without any prior notice.
3. The Company will not be responsible for any loss of personal data and
1.2.2 Unlock the Screen 2
damage caused by incorrect operation of software/hardware, artificial
1.2.3 Lock the screen 2 damages, replacement of batteries or any other accident. To avoid loss
of your data, please backup your data to your computer at any time.
1.2.4 Switch OFF 2 4. We can not control any dispute from users misunderstanding or
incorrect operation against the manual, the company will not take any
1.2.5 Batter y charging 2
relevant responsibility for any accidental loss potentially occurring in
1.2.6 Switch input methods 3 the process of using this manual.
5. Please do not repair it by yourself, other wise, we will not provide you
1.2.7 Use T-Flash card 3 with aftersale ser vice.
6.Our company reser ves the final explanation right to this manual and
1.2.8 Connected to the computer 4 other relevant information
1.2.9 Browse the file in the device 4

1.2.10 Startup programs 5 Preface


1.2.11 Close programs 5
Dear Customers,
1.2.12 Screen operation 5 Thanks ver y much for purchasing our product! This device is built-in
high performance Wifi receiver module, supporting external 3G USB
1.2.13 Home screen 5 DONGLE wireless network card, turning on the broadband wireless
networks, breaking through the restraint of network cable; it will bring
1.2.14 Screen gestures 6
you into the portable media player world and fulfill your entertainment
1.2.15 Security setting 7 needs. It also support picture browsing, E-book Reader, games, online
chat and other functions, various settings will fully show your
1.2.16 Display setting 8 individuality.
1.2.17 Wireless And Network Settings 8

1.3 Technical specifications 10 Safety notices


Warranty 11
This manual contains important information, in order to avoid accidents,
please read this manual carefully before you use this product.
● Please do not let the player fall or rub or compact with hard objects
during using, or it may cause surface scratch of the player,batter y loose,
data lose or damages of other hardware.
● Never let this product expose to the humid environment or rain as
the water leaked in may disable it to the extent beyond maintenance. 1 . Over view
● You are recommended not to use the headset with large volume
continuously, please adjust the volume to the size of appropriate
1.1 Appearance and Keys
security and control the using time to avoid the damage to your hearing,
as excessive volume will cause permanent hearing damage. 1 8
● Please do not cut off the power abruptly during software update and
download, or it may cause data loss and system error.
● Please do not turn on the device where the wireless equipment is
forbidden or when the usage of the device will cause interference and 2
danger. Please obser ve any relevant restrictions.
● Please use original accessories and batteries, do not use 3
incompatible products. 4
● Please do not use the device at gas station or nearby the fuel and
chemicals. 5
● Please do not use this product when you are driving or walking in the 6
street, or it may cause an accident. 7
● Please do not scrape the screen, it may be damaged and can not
display anything.
● Never clean the device with any chemicals and detergent, or it will
damage the product surface and corrode the spray paint

Symbol Name Description


Packing list 1 Power Press shortly to enter sleeping/waking up
mode,press long to switch ON/OFF
Welcome to purchase this product , when you open the package , 2 Earphone jack Stereo earphone jack
acceptance of the following: 3 Micro USB port Connect with PC and OTG function
4 HDMI Switch to high definition digital video output mode
5 DC-5V Power socket for charging the device
Item Components Quantity 6 RESET Return to factory default
1 MID Device 1 7 TF Card TF Card Slot
8 VOL+/VOL- VOL+/VOL-
2 Micro USB Cable 1
3 User Manual 1
4 Adapter 1 1.2 Basic Operation
5 Service Card 1 1.2.1 Switch ON
When the device is in the OFF mode, press and hold POWER
key, then you can enter the system desktop.
Attention: Accessories are subject to the real products and change
without notice.

1
1.2.2 Unlock the screen to make sure the battery is fully charged at the first time. On
Please press and drag the icon to the , then the LCD will charging the Power indicating lamp of the device is in high
unlocked automatically. light blue color, the desktop icon of the batter y keep
rolling which shows it is connected to the device.

1.2.6 Switch input methods


The device support handwriting, number, letter, pinyin etc.
switching as follows:
Click any text input area of the working program interface, it
will pop input keyboard interface, as shown below:

1.2.3 Lock the screen Press , then it will pop Input Method switch interface.Select
When the device is in the ON mode, press the POWER key the input method you want here.
shortly, the system will lock the screen and enter the save [Noted] After newly install input method, you should choose
power mode. Then the screen is OFF but the system will still Settings>Language & input>Keyboard & Input methods
run. then you can use.

1.2.4 Switch OFF 1.2.7 Use T-Flash card


When the device is in the ON mode, press and hold the ● Insert T-FLASH card
POWER key for 3 seconds, the screen will display the power Insert the T-Flash card into the slot in direction of the devices
off interface, choose the power off item to confirm, the bottom shell until you hear a sound of click .
system will shut automatically. ● Browse files in the memor y card
In this MID device,you can view and use the needed files in
1.2.5 Batter y charging catologue of Menu>File manager> SD Card.
Insert the micro port of the batter y adaptor into 220V AC slot ● Remove T-Flash card
on the device, and connect the other side with the power Close all open files from the T-Flash, then enter MENU>
socket. Then,you can charge the device. Settings>TF card and & device storage, click Unmount SD
[Note] This device is not recommended to use USB interface card ,System will prompt that TF card was removed safely. Tap
to charge, please use the special power adapter for with your fingertips to the pop-up T-Flash Card
charging.You should charge the batter y for at least 8-12 hours [Note]
1. Do not insert the TF card by force, this card can only be

2 3
applied in one direction.
2. Do not remove the TF card before Uninstalling it, or the
card may be damaged.
3. If the memor y card is write-protected, data will not be
formatted and written, please remove the write protection
before such operations
4. Major brands memor y card is recommended to avoid the
card is not compatible to this device.
5. please well note that the APK (such as application software and
games) is default installed to the device. (not the memory card)

1.2.8 Connected to the computer


One end of the USB line connect to the computer, the other
end connect the MID device, select Settings>Developer
options>USB debugging, the device will connect with
computer, and you can copy files to the device.
1.2.10 Startup programs
Click all the application icon you want to start and it can
switch on.

1.2.11 Close programs


Press the icon continuously or the ESC key, the device will
close the active program. You can also use the corresponding
function in the management currently running applications
to close the program.

1.2.12 Screen operation


● Zoom in and zoom out : In applications which support
zoom gestures, such as photo , IE browser, mail and map etc.
you can zoom in or out the screen contents by opening or
closing your two fingers.
● Rolling: In applications which support rolling gestures,
1.2.9 Browse the file in the device such as photo , IE browser, mail and map etc. you can scroll
the screen contents by sliding your fingers on the screen. If
you want to stop the rolling screen, you just need to touch it.

1.2.13 Home screen


● Switch home screen
In the home state, you can change the home interface by
4 5

s
sliding your fingers on the screen quickly. laterally.
● Custom Home Screen
Press the blank area on the home screen interface for a few 1.2.15 Security
seconds, it will appear Choose wallpaper from menu, then you You can set the unlock pattern, each time you open or wake
can set the home screen. your MID device,you must draw pattern to unlock the screen.
● Move application icons on screen in Settings>Security>Screenlock,it support many unlock ways.
Press the icons of applications you need to move for several
seconds, it will enter the moving model (the icon of
application will be turn big), then drag the icon to expected
position directly.
● Move application icons screen to screen
Press the icons of applications you need to move for several
seconds, and you can drag the icon to the left side or right
side.
● Delete applications
Press the icon of application you need to remove for several
seconds, drag the icon to × (when the icon turns big, the
bottom of screen will appear ×, then you can delete the
application.

1.2.14 Screen gestures


● Click If use the pattern, as below:
When you need to input by the on-screen keyboard, you just 1. You must ensure the four-point connection when you draw
need to select applications or press the button on the screen, the unlock pattern.
then click the items.
● Press
When you want to start the available options of a project(such
as web page link), you only need to press the project.
● Slide
Sliding on the interface with your fingers to make vertical or
horizontal dragging action.
● Drag
Before you start dragging, you must press the items with your
fingers, and can not let fingers leave the screen before
dragging to the expected position.
● Rotation
Changing the screen orientation by rotating the device

6 7
2. Click Continue and draw again to confirm it

Select the expected wireless network , the system will directly


connect the network or popup the password input window
3. Cilck confirm to complete unlock pattern designing.
according to network access security settings. Please consult
4. Each time you open or waking your MID device, you must
your wireless network administrator for the password.
draw pattern to unlock the screen.

1.2.16 Display setting


Click Settings>Display, you can set the brightness/wallpaper/Auto
rotate screen/sleep/font size of the screen.

1.2.17 Wireless And Network Settings


a) WIFI
Click Settings>Wi-Fi, turn on the wifi, the device will find
available wireless network o n the right interface.

8 9
1.3 Technical specifications

Size L 10.3 x W 6.2 x H 5 inches


Weight 1.4 lbs
LCD Display 10.1 inch 1024*600- Multi-point capacitive touch screen
PC Interface High speed Micro USB
OS Android 4.1
Hard Drive Capacity 8GB
System Memor y 1G DDR3
Capacity Expansion Support T-Flash card 32GB(max)
Format Mp3, WMA, OGG, AAC, 3GP, WAV etc.
Music Function 20Hz-20KHz
Max. Resolutions
Format Mp4, MKV, RMVB, AVI etc.
Video Function Max. Resolutions 1920 *1080
Screen Ratio 16:9
Photo browse JPG/BMP/JPEG/GIF.
Support 802.11b/g /n
WIFI Transmission rate Max 54Mbps
Work Frequency 2.4GHz
Camera Function Front 0.3 megapixel camera, bank 200W
Recording Function
Support
Support
Working
-20-60℃
temperature
Languages Simplified Chinese/Traditional Chinese/English/French/
German/Spanish.

10
/Tablet PC
for parts and ninety(90)days for labor,starting from the original date of

8. This warranty does not apply to customers outside the Continental US states.

11 12

You might also like