1 THREE-PHASE SYNCHRONOUS GENERATOR

TCU288D
Datasheet For 4 Poles - 50Hz @ 1500rpm / 60Hz @ 1800rpm

Ambient Temperature 40°C Excitation Brushless Short Circuit Current Capacity (with PMG) ≥300%
Temperature Rise 125°C Winding Pitch 2/3 Method of Cooling IC01
Service Duty Continuous Power Factor 0.8 Direction of Rotation Counter-clockwise
Phase 3 Insulation Class Class H Maximum Over-speed 2250 rpm
Pole 4 Waveform : TIF <50 Degree of Protection IP21
Voltage Regulation +/- 0.5% Waveform : THF <2% Radio interference Class B Group 1
AVR Model ETC-1 Altitude ≤1000 m.a.s.l Total Harmonic Content < 3% - At no load

Electrical and Mechanical Characteristic

Frequency Hz 50 60
Round per minute rpm 1500 1800
Voltage ( Y Connection ) - Series Star V 380 400 415 380 416 440 460 480
Voltage ( YY Connection ) - Parallel Star V 190 200 208 190 208 220 230 240
Voltage ( ∆ Connection ) - Series Delta V 220 230 240 220 240 254 266 277
Voltage ( ∆∆ Connection ) - Parallel Delta V 110 115 120 110 120 127 133 138
kVA 190 200 192.5 190 207.5 220 230 240
Rated power at Class H (125ºC) temperature rise
kW 152 160 154 152 166 176 184 192
4/4% 92.3 92.4 92.3 92.2 92.3 92.4 92.6 92.8
Efficiency at Class H (P.F.=0.8) 3/4% 93.0 93.1 93.0 92.9 93.0 93.1 93.3 93.5
2/4% 92.7 92.8 92.7 92.5 92.6 92.7 92.9 93.1
4/4% 93.9 94 93.9 93.9 94.0 94.1 94.3 94.5
Efficiency at Class H (P.F.=1.0) 3/4% 94.6 94.7 94.6 94.6 94.7 94.8 95.0 95.2
2/4% 94.3 94.4 94.3 94.2 94.3 94.4 94.6 94.8
Reactance (%) at Class H
Short-circuit ratio Kcc 0.3310 0.3490 0.3897 0.2759 0.3029 0.3194 0.3337 0.3484
Direct axis synchronous reactance unsaturated Xd 3.0211 2.8700 2.5663 3.6250 3.3010 3.1307 2.9969 2.8700
Quadrature axis synchronous reactance unsaturated Xq 1.8632 1.7700 1.5827 2.2356 2.0358 1.9308 1.8482 1.7700
Direct axis transient reactance saturated X'd 0.2284 0.2170 0.1940 0.2741 0.2496 0.2367 0.2266 0.2170
Direct axis subtransient reactance saturated X"d 0.1905 0.1810 0.1618 0.2286 0.2082 0.1974 0.1890 0.1810
Quadrature axis subtransient reactance saturated X"q 0.2200 0.2090 0.1869 0.2640 0.2404 0.2280 0.2182 0.2090
Zero sequence reactance unsaturated X0 0.0389 0.0370 0.0331 0.0467 0.0426 0.0404 0.0386 0.0370
Leakage reactance XL 0.1347 0.1280 0.1145 0.1617 0.1472 0.1396 0.1337 0.1280
Negative sequence reactance saturated X2 0.2053 0.1950 0.1744 0.2463 0.2243 0.2127 0.2036 0.1950

Open circuit time constant (sec.) T'do 1.4806

Short-circuit transient time constant (sec.) T'd 0.0786
Subtransient time constant (sec.) T"d 0.0092
Armature time constant (sec.) Tα 0.0206
No load excitation current io(A) 0.5 0.5
Full load excitation current ic(A) 1.9 1.8
Full load excitation voltage uc(V) 50 48
Stator Winding Resistance (20℃) ohm 0.02424
Rotor Winding Resistance (20℃) ohm 0.9955
Exciter Stator Resistance (20℃) ohm 17.12
Exciter Rotor Phase resistance ohm 0.06603
Cooling air requirement m3/sec 0.43 0.51

Configuration Single Bearing Double Bearing

Type of Construction B2 - SAE IM B34
Inertia (J) [kgm2] 2.5 2.4
Total Weight 563 571
Drive end bearing / Lubrication Not supply 6218 C3-2Z / Prelubricated - sealed for life
Non-drive end bearing / Lubrication 6311 C3-2Z / Prelubricated - sealed for life
Recovery time - sec. 0.5
Stator winding DOUBLE LAYER CONCENTRIC
Number of Terminal 12
Rotor with damping cage
Overload 110% rated load for 1 hour
STANDARD COMPLIANCE - IEC 60034-1; CEI 2-3; BS 4999-5000; VDE 0530; NF 51-100,111; OVE M-10, NEMA MG 1.22.
Data and Technical Specification are subject to change in order to update or improve the products, without prior notice