Aluminized Coated Steel

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

Aluminized Coated Steel is mild steel coated with fine and uniform aluminum and silicon

coating, which gives additional heat resistance( upto 450 Degree) to the Steel along with
high resistance and natural corrosion and with a admirable finishing.
Benefits of Aluminized Coated Steel.
• Heat Resistant upto - 450 Degree.-:Arrest's heat i.e Stops temperature fall in reactors
and industrial ovens and helps quick Heating it Also adds external Safety
• No- Decolonization -: Stainless Steel changes color after frequent heating,
Aluminized coating shall stay the same.
• Low cost Compared to Stainless Steel
• Excellent Finishing with uniform Surface.
Specifications
Material is as per ASTM A- 463 - coating - Micron- 40micron/ 60 micron/ 80 micron/ 120
micron coatings are available.
Thickness range- 0.3mm – 2.3mm.
Quality- Commercial/ Drawing/ Deep Drawing quality possible.
Applications
 Automobile Silencers & Exhaust Systems,
 Kerosene/ Charcoal based Stoves.
 Industrial Heaters & Industrial Ovens.
 Bakery Mould Products.
 Industrial Blowers.
 All heat based Moulding products.
 Household Thermal Equipments
 Hot Air Ducting.
 Insulation in Industrial and commercial building and Hospitals.

Technical Specifications.
HEAT RESISTANCE

The heat resistance of ALCOSTA is excellent compared to that of zinc-coated steel sheet,
galvanized steel sheet, and cold-rolled steel sheet. Absolutely no changes in appearance and
discoloration are observed even under extended exposure to the temperature of 450℃. At
temperatures higher than 450℃ the coating material transforms to aluminum-iron alloy
layer so that heat resistance and corrosion resistance are preserved even if discoloration
occurs. The coating maintains its sacrificial properties up to the temperature of
approximately 600℃.

Heat Reflectivity.

Aluminized Coated Steel provided with excellent thermal reflectivity due to the fineness of
its surface. The thermal reflectivity of Aluminized Coated Steel at 450℃ reaches up to
approximately 80%, and this is applied to thermal reflectors for toasters, gas ranges, oil
stove, and so forth.

Galvanized
HEAT REFLECTIVITY Electro- Sheets
Aluminized coated steel
in % Galvanized Sheet
Spangle

100℃X 24hrs. 90 90 90

400℃X 24hrs. 80 30 20

SALT SPRAY TEST RESULTS FOR EACH PRODUCT

Aluminized Coated Steel has generally been understood being poor in form ability due to the
presence of brittle alloy layer between the steel and aluminum layers. But, when form ability of
Aluminized Coated Steel is compared with that of cold-rolled steel sheets and galvanized steel sheets,
DQ and DDQ grades of ALCOSTA shows better form ability than those.

TENSILE TEST
MATERIAL CLASS CODE
YP(kgf/mm2) TS(kgf/mm2) E (%)

Commercial SA1C 23 36 35

HOT-DIPPED STEEL SHEET Drawing SA1D 21 32 38

Deep-Drawing SA1E 20 31 40

COLD-ROLLED STEEL SHEET Commercial SPCC 24 34 38

Steel Grade Dx 51 D + AS = JIS G 3314- SA1C (Commercial quality)


Steel Grade Dx 53 D + As = JIS G 3314- SA1D (Drawing quality)
Steel Grade Dx 54 D + As = JIS G 3314- SA1E (Deep Drawing quality)
Steel Grade Dx 56 D + As = JIS G 3314- EDDQ (Extra Deep Drawing quality

PAINTABILITY
Paint ability of aluminum coating is better than of galvanized steel sheet. In order to improve paint
adhesion quality, chemical treatment is necessary.

Aluminized Steel is Know in various names around the world such as- Alu Si, Aluminized Steel,
Aluminum Plated Steel, Aluminum Coated Steel. ACMS ( Aluminized coated Mild Steel), ALUSIL .

Thickness range( Millimeter) : 0.3,0.4,0.5,0.6,0.7,0.8,0.9,1,1.2,1.5,1.6,1.8,2,2.3,2.5,3

Thickness range( Inches ) : 0.01 18 , 0.0 157, 0.0 197, 0.0 236, 0.0 276, 0.0 315, 0.0 354, 0.0 394 , 0.0 472, 0.0 591, 0.0
630, 0.0 709, 0.0 787, 0.0 906, 0.0 984, 0.1 181 .

You might also like