X670E GAMING PLUS WIFI

Motherboard

User Guide
Contents
Quick Start..................................................................................................................... 4

Specifications............................................................................................................... 17

Special Features.......................................................................................................... 21

Package Contents....................................................................................................... 22

Back Panel Connectors.............................................................................................. 23

LAN Port LED Status Table................................................................................... 24
Audio Jacks Connection........................................................................................ 24
Installing Antennas................................................................................................ 26

Overview of Components............................................................................................ 27
CPU Socket............................................................................................................ 28
DIMM Slots............................................................................................................. 29
PCI_E1~4: PCIe Expansion Slots........................................................................... 30
M2_1~4: M.2 Slots (Key M).................................................................................... 31
SATA_P1~P4: SATA 6Gb/s Connectors................................................................. 38
JAUD1: Front Audio Connector............................................................................. 39
JFP1, JFP2: Front Panel Connectors.................................................................... 39
CPU_PWR1~2, ATX_PWR1: Power Connectors.................................................... 40
JUSB1: USB 3.2 Gen 2 Type-C front panel Connector.......................................... 41
JUSB2~3: USB 3.2 Gen 1 Connectors................................................................... 41
JUSB4~5: USB 2.0 Connectors.............................................................................. 42
JTPM1: TPM Module Connector............................................................................ 42
JCI1: Chassis Intrusion Connector........................................................................ 43
JOCFS1: Safe Boot Jumper................................................................................... 43
JTBT_U4_1: USB4 Expansion Card Connector..................................................... 44
JDASH1 : Tuning Controller connector................................................................. 44
CPU_FAN1, PUMP_FAN1, SYS_FAN1~6: Fan Connectors................................... 45
JBAT1: Clear CMOS (Reset BIOS) Jumper............................................................ 46
JRGB1~2: RGB LED connectors............................................................................ 47
JARGB_V2_1~2: A-RAINBOW V2 (ARGB Gen2) LED connectors.......................... 48
EZ Debug LED........................................................................................................ 49

2
Installing OS, Drivers & MSI Center........................................................................... 50
Installing Drivers with MSI Driver Utility Installer................................................ 51
MSI Center............................................................................................................. 53

UEFI BIOS..................................................................................................................... 54
BIOS Setup............................................................................................................. 55
Resetting BIOS....................................................................................................... 56
Updating BIOS........................................................................................................ 56

Block Diagram............................................................................................................. 58

3
Quick Start
Thank you for purchasing a new motherboard from MSI®. This Quick Start section
provides demonstration diagrams about how to install your computer. Some of the
installations also provide video demonstrations. Please link to the URL to watch it
with the web browser on your phone or tablet. You may have even link to the URL by
scanning the QR code.

Preparing Tools and Components

AMD® AM5 CPU

AM5 CPU Fan

Chassis

DDR5 Memory

Power Supply Unit

Graphics Card

Thermal Paste

SATA Hard Disk Drive

Phillips Screwdriver

A Package of Screws

4
Safety Information
∙ The components included in this package are prone to damage from electrostatic
discharge (ESD). Please adhere to the following instructions to ensure successful
computer assembly.
∙ Ensure that all components are securely connected. Loose connections may cause
the computer to not recognize a component or fail to start.
∙ Hold the motherboard by the edges to avoid touching sensitive components.
∙ It is recommended to wear an electrostatic discharge (ESD) wrist strap when
handling the motherboard to prevent electrostatic damage. If an ESD wrist strap
is not available, discharge yourself of static electricity by touching another metal
object before handling the motherboard.
∙ Store the motherboard in an electrostatic shielding container or on an anti-static
pad whenever the motherboard is not installed.
∙ Before turning on the computer, ensure that there are no loose screws or metal
components on the motherboard or anywhere within the computer case.
∙ Do not boot the computer before installation is completed. This could cause
permanent damage to the components as well as injury to the user.
∙ If you need help during any installation step, please consult a certified computer
technician.
∙ Always turn off the power supply and unplug the power cord from the power outlet
before installing or removing any computer component.
∙ Keep this user guide for future reference.
∙ Keep this motherboard away from humidity.
∙ Make sure that your electrical outlet provides the same voltage as is indicated on
the PSU, before connecting the PSU to the electrical outlet.
∙ Place the power cord such a way that people can not step on it. Do not place
anything over the power cord.
∙ All cautions and warnings on the motherboard should be noted.
∙ If any of the following situations arises, get the motherboard checked by service
personnel:
• Liquid has penetrated into the computer.
• The motherboard has been exposed to moisture.
• The motherboard does not work well or you can not get it work according to user
guide.
• The motherboard has been dropped and damaged.
• The motherboard has obvious sign of breakage.
∙ Do not leave this motherboard in an environment above 60°C (140°F), it may damage
the motherboard.

5
Case stand-off notification
To prevent damage to the motherboard, any unnecessary mounting stand-off between
the motherboard circuits and the computer case is prohibited. The Case standoff keep
out zone signs will be marked on the backside of motherboard (as shown below) to
serve as a warning to user.

Avoid collision notification

Protective paint is printed around each screw hole to prevent parts from being
scratched.

* The illustration above is for reference only and may vary from the motherboard you
purchased.

6
Installing a Processor

⚽ 2

∙ https://youtu.be/cltgIYiGtWY

6 4

10
11 8

7
⚠ Important
If you are installing the screw-type CPU heatsink, please follow the figure below to
remove the retention module first and then install the heatsink.

8
Installing DDR5 memory

⚽
∙ https://youtu.be/XiNmkDNZcZk

DIMMA1

DIMMA2 DIMMA2 DIMMA2

DIMMB2 DIMMB1
DIMMB2

9
Connecting the Front Panel Header

⚽
∙ http://youtu.be/DPELIdVNZUI

-
ED
RL
WE
D+ PO
LE
ER W
ED PO
DL
W

HD
RS
WE
PO
W
TS
SE
RE

RESET SW

Power LED Power Switch

HDD LED

2 10
JFP1 1 9
Reserved

HDD LED Reset Switch

JFP1

HDD LED -
HDD LED
HDD LED +

POWER LED -
POWER LED
POWER LED +

10
Installing the Motherboard

⚽
∙ https://youtu.be/wWI6Qt51Wnc

Torque:
3 kgf·cm*
2

*3 kgf·cm
= 0.3 N·m
= 2.6 lbf·in

11
Connecting the Power Connectors

⚽
∙ http://youtu.be/gkDYyR_83I4

ATX_PWR1

CPU_PWR1~2

12
Installing SATA Drives

⚽
∙ http://youtu.be/RZsMpqxythc

2
3

13
Installing a Graphics Card

⚽
∙ http://youtu.be/mG0GZpr9w_A

3
2

5
4

14
Connecting Peripheral Devices

15
Power On

1 2

16
Specifications
∙ Supports AMD Ryzen™ 7000 Series Desktop Processor*

CPU ∙ Processor socket AM5

* Please go to www.msi.com to get the newest support status as new processors
are released.

Chipset AMD X670 Chipset

∙ 4x DDR5 memory slots, supporting up to 192GB*

∙ Memory Support DDR5 7800+(OC)/ 7600(OC)/ 7400(OC)/
7200(OC)/ 7000(OC)/ 6800(OC)/ 6600(OC)/ 6400(OC)/
6200(OC)/ 6000(OC)/ 5800(OC)/ 5600(OC)/ 5400(OC)/
5200(OC)/ 5000(OC)/ 4800(JEDEC) MHz
∙ Max. overclocking frequency:
• 1DPC 1R Max speed up to 7800+ MHz
Memory • 1DPC 2R Max speed up to 6400+ MHz
• 2DPC 1R Max speed up to 6400+ MHz
• 2DPC 2R Max speed up to 5400+ MHz
∙ Supports Dual-Channel mode
∙ Supports non-ECC, un-buffered memory
∙ Supports AMD EXPO
* Please refer to www.msi.com for more information on compatible memory.

∙ 3x PCIe x16 slots

• PCI_E1 (From CPU)
• Supports up to PCIe 5.0 x16
• PCI_E3 (From X670 chipset)
• Supports up to PCIe 3.0 x1
Expansion Slots
• PCI_E4 (From X670 chipset)
• Supports up to PCIe 4.0 x4
∙ 1x PCIe x1 slot
• PCI_E2 (From X670 chipset)
• Supports up to PCIe 3.0 x1

∙ 1x HDMI™ 2.1 port with HDR, supports a maximum

resolution of 4K 60Hz*/ **
∙ 1x DisplayPort 1.4 supports a maximum resolution of 4K
Onboard Graphics
60Hz*/ **
* Available only on processors featuring integrated graphics.
** Graphics specifications may vary depending on the CPU installed.

Continued on next column

17
 Continued from previous column

∙ 4x SATA 6Gb/s ports

SATA Ports
• SATA_P1~P4 (From X670 chipset)

∙ 4x M.2 slots (Key M)

• M2_1 slot (From CPU)
• Supports up to PCIe 5.0 x4
• Supports 2280/ 22110 storage devices
• M2_2 slot (From CPU)
• Supports up to PCIe 4.0 x4
M.2 SSD Slots • Supports 2260/ 2280 storage devices
• M2_3 slot (From X670 chipset)
• Supports up to PCIe 4.0 x4
• Supports 2260/ 2280 storage devices
• M2_4 slot (From X670 chipset)
• Supports up to PCIe 4.0 x4
• Supports 2260/ 2280 storage devices

∙ Supports RAID 0, RAID 1 and RAID 10 for SATA storage

RAID devices
∙ Supports RAID 0 and RAID 1 for M.2 NVMe storage devices

Realtek® ALC897 Codec

Audio
∙ 7.1-Channel High Definition Audio

LAN ∙ 1x Realtek® 8125BG 2.5Gbps LAN controller

AMD Wi-Fi 6E
∙ The Wireless module is pre-installed in the M.2 (Key-E)
slot
∙ Supports MU-MIMO TX/RX
∙ Supports 20MHz, 40MHz, 80MHz,160MHz bandwidth in
Wi-Fi & Bluetooth® 2.4GHz/ 5GHz or 6GHz* bands
∙ Supports 802.11 a/ b/ g/ n/ ac/ ax
∙ Supports Bluetooth® 5.3**
* The usage of Wi-Fi 6GHz band relies on Windows 11 support and depends on
every country’s regulations.
** The Bluetooth version may be updated, please refer to the Wi-Fi chipset
vendor’s website for details.

Continued on next column

18
 Continued from previous column

∙ 1x 24-pin ATX main power connector

Power Connectors
∙ 2x 8-pin +12V power connectors

∙ 1x USB 3.2 Gen 2 10Gbps Type-C front panel port (From

X670 chipset)
∙ 2x USB 3.2 Gen 1 5Gbps connectors (From X670 chipset)
Internal USB
Connectors • Supports additional 4 USB 3.2 Gen 1 5Gbps ports
∙ 2x USB 2.0 connectors (From X670 chipset)
• Supports additional 4 USB 2.0 ports

∙ 1x 4-pin CPU fan connector

Fan Connectors ∙ 1x 4-pin water-pump fan connector
∙ 6x 4-pin system fan connectors

∙ 1x Front panel audio connector

∙ 2x System panel connectors
∙ 1x Chassis Intrusion connector
System Connectors
∙ 1x TPM module connector
∙ 1x Tuning Controller connector
∙ 1x USB4 expansion card connector

∙ 1x Clear CMOS jumper

Jumpers
∙ 1x OC safe boot jumper

∙ 2x 4-pin RGB LED connectors

LED Features ∙ 2x 3-pin A-RAINBOW V2 (ARGB Gen2) LED connectors
∙ 4x EZ Debug LED

Continued on next column

19
 Continued from previous column

∙ 1x Flash BIOS button

∙ 1x DisplayPort
∙ 1x HDMI™ port
∙ 3x USB 3.2 Gen 2 10Gbps Type-A ports (From CPU & X670
chipset)
∙ 4x USB 3.2 Gen 1 5Gbps Type-A ports (From CPU & X670
Back Panel chipset)
Connectors
∙ 4x USB 2.0 Type-A ports (From X670 chipset)
∙ 1x 2.5 Gbps LAN (RJ45) port
∙ 1x USB 3.2 Gen 2x2 20Gbps Type-C port (From X670
chipset)
∙ 2x Wi-Fi antenna connectors
∙ 3x audio jacks

I/O Controller NUVOTON NCT6687-R Controller Chip

∙ CPU/ System/ Chipset temperature detection

Hardware Monitor ∙ CPU/ System/ Pump fan speed detection
∙ CPU/ System/ Pump fan speed control

∙ ATX Form Factor

Form Factor
∙ 9.6 in. x 12.0 in. (243 mm x 304 mm)

∙ 1x 256 Mb flash
∙ UEFI AMI BIOS
BIOS Features
∙ ACPI 6.4, SMBIOS 3.5
∙ Multi-language

∙ Drivers
∙ MSI Center
∙ CPU-Z MSI GAMING
Software ∙ AIDA64 Extreme - MSI Edition
∙ Norton 360
∙ Adobe Creative Cloud
∙ Acrobat

20
Special Features
MSI Center • Dual CPU Power
• Mystic Light • Memory Boost
• Ambient Link • Lightning Gen 5 PCI-E / M.2 Slot
• Frozr AI Cooling • Lightning Gen 4 PCI-E / M.2 Slot
• LAN Manager • Front USB Type-C
• User Scenario • Server Grade PCB
• True Color • 2oz Copper thickened PCB
• Live Update
DIY Friendly
• Hardware Monitoring
• PCI-E Steel Armor
• Super Charger
• Pre-installed I/O Shield
• Devices Speed Up
• EZ M.2 Clips
• Smart Image Finder
• EZ DEBUG LED
• MSI Companion
• EZ LED Control
• System Diagnosis
• Flash BIOS Button
Thermal Features
Audio
• Extended Heatsink Design
• Audio Boost
• M.2 Shield Frozr (1 double-side
design) RGB Support
• K7 MOSFET thermal pad / Extra • Mystic Light Extension (RGB)
choke pad • Mystic Light Extension (A-RAINBOW
• Fan headers (CPU + PUMP + V2)
SYSTEM) • Ambient Devices Support
Performance BIOS
• Core Boost • Click BIOS 5
• VRM Power Design

21
Package Contents
Please check the contents of your motherboard package. It should contain:

Board
• 1x Motherboard

Documentation
• 1x Quick installation guide
• 1x European Union regulatory notice

Cables
• 1x SATA6Gb/s cable

Accessories
• 1x Wi-Fi antenna set
• 3x EZ M.2 clip packages (1 set/pack)
• 1x M.2 plate screw package (1 set/pack)

⚠ Important
If any of the above items are damaged or missing, please contact your retailer.

22
Back Panel Connectors

1 2 3 4 5 6 7 8

9 10 11 12

Item Description

1 Flash BIOS button

2 DisplayPort

3 USB 3.2 Gen 2 10Gbps Type-A ports (From CPU)

USB 3.2 Gen 1 5Gbps Type-A port (From CPU)

4
∙ Flash BIOS Port

5 USB 2.0 Type-A ports (From X670 chipset)

6 2.5 Gbps LAN jack

7 Wi-Fi antenna connectors

8 Audio jacks

9
HDMI™ port

10 USB 3.2 Gen 1 5Gbps Type-A ports (From X670 chipset)

11 USB 3.2 Gen 2 10Gbps Type-A ports (From X670 chipset)

12 USB 3.2 Gen 2x2 20Gbps Type-C port (From X670 chipset)

23
LAN Port LED Status Table

Link/ Activity LED Speed LED

Status Description Status Speed

Off No link Off 10 Mbps

Yellow Linked Green 100/ 1000 Mbps

Blinking Data activity Orange 2.5 Gbps

Audio Jacks Connection

Audio jacks to headphone and microphone diagram

Audio jacks to stereo speakers diagram

AUDIO INPUT

24
Audio jacks to 4-channel speakers diagram

AUDIO INPUT

Rear Front

Audio jacks to 5.1-channel speakers diagram

AUDIO INPUT

Rear Front

Center/
Subwoofer

Audio jacks to 7.1-channel speakers diagram

AUDIO INPUT

Rear Front

Side Center/
Subwoofer

Front Panel

25
Installing Antennas
1. Screw two antenna cables tight to the Wi-Fi antenna connectors as shown.

2. Place the antenna as high as possible.

26
Overview of Components

PUMP_FAN1
CPU_PWR1

CPU_PWR2

SYS_FAN1
Processor

DIMMB1
DIMMB2
DIMMA1
DIMMA2
Socket

JRGB2
CPU_FAN1

JARGB_V2_2

SYS_FAN2
SYS_FAN3

ATX_PWR1

JTPM1
JUSB1

SYS_FAN6 M2_1
PCI_E1 M2_3

M2_2
M2_4

PCI_E2
SATA▼_P1▲_P2

PCI_E3 SATA▼_P3▲_P4

JUSB2
JFP2
PCI_E4
JARGB_V2_1
JAUD1

JRGB1

JDASH1

JTBT_U4_1

JCI1

SYS_FAN5

SYS_FAN4

JUSB5

JUSB4

JUSB3

JOCFS1
JBAT1
JFP1

27
CPU Socket

Distance from the center of the

CPU to the nearest DIMM slot.

53.5 mm

Introduction to the AM5 CPU

The surface of the AM5 CPU has two
notches and a golden triangle to
assist in correctly lining up the CPU for
motherboard placement. The golden
triangle is the Pin 1 indicator.

⚠ Important
∙ When changing the processor, the system configuration could be cleared and reset
BIOS to default values, due to the AM5 processor’s architecture.
∙ Always unplug the power cord from the power outlet before installing or removing
the CPU.
∙ Please retain the CPU protective cap after installing the processor. MSI will deal
with Return Merchandise Authorization (RMA) requests if only the motherboard
comes with the protective cap on the CPU socket.
∙ When installing a CPU, always remember to install a CPU heatsink. A CPU heatsink
is necessary to prevent overheating and maintain system stability.
∙ Confirm that the CPU heatsink has formed a tight seal with the CPU before booting
your system.
∙ Overheating can seriously damage the CPU and motherboard. Always make sure the
cooling fans work properly to protect the CPU from overheating. Be sure to apply an
even layer of thermal paste (or thermal tape) between the CPU and the heatsink to
enhance heat dissipation.
∙ Whenever the CPU is not installed, always protect the CPU socket pins by covering
the socket with the plastic cap.
∙ If you purchased a separate CPU and heatsink/ cooler, Please refer to the
documentation in the heatsink/ cooler package for more details about installation.
∙ This motherboard is designed to support overclocking. Before attempting to
overclock, please make sure that all other system components can tolerate
overclocking. Any attempt to operate beyond product specifications is not
recommended. MSI® does not guarantee the damages or risks caused by inadequate
operation beyond product specifications.

28
DIMM Slots
DIMMA1 DIMMB1

Channel A Channel B

DIMMA2 DIMMB2

Memory module installation recommendation

DIMMA1
DIMMA2 DIMMA2 DIMMA2
DIMMB2 DIMMB1
DIMMB2

⚠ Important
∙ Always insert memory modules in the DIMMA2 slot first.
∙ To ensure system stability for Dual channel mode, memory modules must be of the
same type, number and density.
∙ Some memory modules may operate at a lower frequency than the marked value
when overclocking due to the memory frequency operates dependent on its Serial
Presence Detect (SPD). Go to BIOS and find the DRAM Frequency to set the memory
frequency if you want to operate the memory at the marked or at a higher frequency.
∙ It is recommended to use a more efficient memory cooling system for full DIMMs
installation or overclocking.
∙ The stability and compatibility of installed memory module depend on installed CPU
and devices when overclocking.
∙ Please refer to www.msi.com for more information on compatible memory.

29
PCI_E1~4: PCIe Expansion Slots

PCI_E1: PCIe 5.0 x16 (From CPU)

PCI_E2: PCIe 3.0 x1 (From X670 chipset)

PCI_E3: PCIe 3.0 x1 (From X670 chipset)

PCI_E4: PCIe 4.0 x4 (From X670 chipset)

⚠ Important
∙ If you install a large and heavy graphics card, you need to use a tool such as MSI
Graphics Card Bolster to support its weight to prevent deformation of the slot.
∙ For a single PCIe x16 expansion card installation with optimum performance, using
the PCI_E1 slot is recommended.
∙ When adding or removing expansion cards, always turn off the power supply and
unplug the power supply power cable from the power outlet. Read the expansion
card’s documentation to check for any necessary additional hardware or software
changes.

30
M2_1~4: M.2 Slots (Key M)

M2_1

M2_2
M2_3

M2_4

⚠ Important
If your M.2 SSD equips its own heatsink, please remove the M.2 plate or rubber cube
in the M.2 slot before installing M.2 SSD. Do not re-install the heatsink supplied with
your motherboard.

Installing M.2 module into M2_1 slot

1. Loosen the screws of M.2 Shield Frozr heatsink.
2. Lift up the M.2 Shield Frozr heatsink and remove it.

31
3. Remove the protective films from the M.2 thermal pads on the M.2 plate.

4. If you want to install 22110 SSD, please remove the screw set and then install the
supplied M.2 plate screw into the 2280 screw hole. Skip this step, if you install 2280
SSD.

4
4

5. Insert your M.2 SSD into the M.2 slot at a 30-degree angle.
6. Rotate the EZ M.2 Clip to fix the M.2 SSD.

5 5
6
30º 30º

2280 SSD

22110 SSD

32
7. Remove the protective films from the thermal pads under the M.2 Shield Frozr
heatsink.
8. M.2 Shield Frozr heatsink back in place and secure it.

33
Installing M.2 module into M2_2 & M2_3 slots
1. Slowly and diagonally loosen the screws of the M.2 Shield Frozr heatsink.
2. Lift up the M.2 Shield Frozr heatsink and remove it.

1
2
1

3. If you want to install 2260 M.2 SSD, please install the supplied EZ M.2 Clip kit in
the2260 screw hole. Skip this step, if you install 2280 SSD.

34
4. Insert your M.2 SSD into the M.2 slot at a 30-degree angle.
5. Rotate the EZ M.2 Clip to fix the M.2 SSD.

4 4
5
30º
2260 SSD
30º

2280 SSD

6. Remove the protective films from the thermal pads under the M.2 Shield Frozr
heatsink.
7. M.2 Shield Frozr heatsink back in place and secure it.

7
7

35
Installing M.2 module into M2_4 slot
1. Loosen the screws of M.2 Shield Frozr heatsink.
2. Lift up the M.2 Shield Frozr heatsink and remove it.

1
2

3. If you want to install 2260 M.2 SSD, please install the supplied EZ M.2 Clip kit in
the2260 screw hole. Skip this step, if you install 2280 SSD.

4. Insert your M.2 SSD into the M.2 slot at a 30-degree angle.
5. Rotate the EZ M.2 Clip to fix the M.2 SSD.

4 4
5
30º
2260 SSD
30º

2280 SSD

36
6. Remove the protective films from the thermal pads under the M.2 Shield Frozr
heatsink.
7. M.2 Shield Frozr heatsink back in place and secure it.

37
SATA_P1~P4: SATA 6Gb/s Connectors
These connectors are SATA 6Gb/s interface ports. Each connector can connect to one
SATA device.

SATA_P2
SATA_P1
SATA_P4
SATA_P3

⚠ Important
∙ Please do not fold the SATA cable at a 90-degree angle. Data loss may result during
transmission otherwise.
∙ SATA cables have identical plugs on either sides of the cable. However, it is
recommended that the flat connector be connected to the motherboard for space
saving purposes.

38
JAUD1: Front Audio Connector
This connector allows you to connect audio jacks on the front panel.

2 10

1 9

Pin Signal Name Pin Signal Name

1 MIC L 2 Ground

3 MIC R 4 NC

5 Head Phone R 6 MIC Detection

7 SENSE_SEND 8 No Pin

9 Head Phone L 10 Head Phone Detection

JFP1, JFP2: Front Panel Connectors

The JFP1 connector controls the power on, power reset, and the LEDs on your PC
case/chassis. Power Switch/ Reset Switch headers allow you to connect power button/
reset button. Power LED header connects to LED light on the PC case, and HDD LED
header indicates the activity of the hard disk. The JFP2 connector is for Buzzer and
Speaker. To connect the cables from PC case to the right pins, please refer to the
following images below.

Power LED Power Switch

2 10
JFP1 1 9
Reserved

HDD LED Reset Switch

Buzzer

JFP2 1

Speaker

⚠ Important
Please note that Power LED and HDD LED have positive and negative connection,
you need to link up the cable to the corresponding positive and negative port on the
motherboard. Otherwise, LEDs won’t work properly.

39
CPU_PWR1~2, ATX_PWR1: Power Connectors
These connectors allow you to connect an ATX power supply.

CPU_PWR1~2

Pin Signal Name Pin Signal Name

1 Ground 2 Ground

3 Ground 4 Ground

5 +12V 6 +12V

7 +12V 8 +12V

ATX_PWR1

Pin Signal Name Pin Signal Name

1 +3.3V 2 +3.3V

CPU_PWR1~2 8 5
3 Ground 4 +5V
4 1

5 Ground 6 +5V

12 24 7 Ground 8 PWR OK

9 5VSB 10 +12V

ATX_PWR1 11 +12V 12 +3.3V

13 +3.3V 14 -12V

15 Ground 16 PS-ON#
1 13
17 Ground 18 Ground

19 Ground 20 Res

21 +5V 22 +5V

23 +5V 24 Ground

⚠ Important
Make sure that all the power cables are securely connected to a proper ATX power
supply to ensure stable operation of the motherboard.

40
JUSB1: USB 3.2 Gen 2 Type-C front panel Connector
This connector allows you to connect USB 3.2 Gen 2 10Gbps Type-C connector on the
front panel. The connectors possess a foolproof design. When you connect the cable,
be sure to connect it with the corresponding orientation.

USB Type-C Cable

JUSB1

USB Type-C port on

the front panel

JUSB2~3: USB 3.2 Gen 1 Connectors

These connectors allow you to connect USB 3.2 Gen 1 5Gbps ports on the front panel.

Pin Signal Name Pin Signal Name

1 Power 2 USB3_RX_DN

3 USB3_RX_DP 4 Ground

5 USB3_TX_C_DN 6 USB3_TX_C_DP

7 Ground 8 USB2.0-

9 USB2.0+ 10 Ground

11 USB2.0+ 12 USB2.0-

13 Ground 14 USB3_TX_C_DP
10 11
15 USB3_TX_C_DN 16 Ground

17 USB3_RX_DP 18 USB3_RX_DN

19 Power 20 No Pin
1 20

1 10

20 11

41
JUSB4~5: USB 2.0 Connectors
These connectors allow you to connect USB 2.0 ports on the front panel.
2 10

1 9

Pin Signal Name Pin Signal Name

1 VCC 2 VCC

3 USB0- 4 USB1-

5 USB0+ 6 USB1+

7 Ground 8 Ground

9 No Pin 10 NC

⚠ Important
∙ Note that the VCC and Ground pins must be connected correctly to avoid possible
damage.
∙ In order to recharge your iPad, iPhone and iPod through USB ports, please install
MSI Center utility.

JTPM1: TPM Module Connector

This connector is for TPM (Trusted Platform Module). Please refer to the TPM security
platform manual for more details and usages.

2 12

1 11

Pin Signal Name Pin Signal Name

1 SPI Power 2 SPI Chip Select

Master In Slave Out Master Out Slave In

3 4
(SPI Data) (SPI Data)

5 Reserved 6 SPI Clock

7 Ground 8 SPI Reset

9 Reserved 10 No Pin

11 Reserved 12 Interrupt Request

42
JCI1: Chassis Intrusion Connector
This connector allows you to connect the chassis intrusion switch cable.

Normal Trigger the chassis

(default) intrusion event

Using chassis intrusion detector

1. Connect the JCI1 connector to the chassis intrusion switch/ sensor on the chassis.
2. Close the chassis cover.
3. Go to BIOS > SETTINGS > Security > Chassis Intrusion Configuration.
4. Set Chassis Intrusion to Enabled.
5. Press F10 to save and exit and then press the Enter key to select Yes.
6. Once the chassis cover is opened again, a warning message will be displayed on
screen when the computer is turned on.

Resetting the chassis intrusion warning

1. Go to BIOS > SETTINGS > Security > Chassis Intrusion Configuration.
2. Set Chassis Intrusion to Reset.
3. Press F10 to save and exit and then press the Enter key to select Yes.

JOCFS1: Safe Boot Jumper

This jumper is used for Safe Boot. Once enabled, the system will boot with default
settings and lower PCIe (from CPU) mode.

Normal Enabled
(default)
Apply the BIOS default
Boot with the saved settings and lower PCIe
BIOS settings. (from CPU) mode for
Safe Boot.

43
JTBT_U4_1: USB4 Expansion Card Connector
This connector allows you to connect MSI USB4 PD100W Expansion Card.

Pin Signal Name Pin Signal Name

1 Net Name 2 GPIO2

3 Net Name 4 Net Name

5 SLP_S3# 6 GPIO4

7 SLP_S5# 8 Net Name

9 Ground 10 SMB_SCL

11 Net Name 12 SMB_SDA

13 GPIO1 14 Ground
2 18
15 RST# 16 IRQ

1 17 17 GPIO5 18 SMI

JDASH1 : Tuning Controller connector

This connector is used to connect an optional Tuning Controller module.

2 6

1 5

Pin Signal Name Pin Signal Name

1 No Pin 2 NC

3 MCU_SMB_SCL_M 4 MCU_SMB_SDA_M

5 VCC5 6 Ground

44
CPU_FAN1, PUMP_FAN1, SYS_FAN1~6: Fan Connectors
Fan connectors can be classified as PWM (Pulse Width Modulation) Mode or DC Mode.
PWM Mode fan connectors provide constant 12V output and adjust fan speed with
speed control signal. DC Mode fan connectors control fan speed by changing voltage.
The auto mode fan connectors can automatically detect PWM and DC mode.
You can control fans in BIOS> HARDWARE MONITOR panel. It allows you to set DC
or PWM to your fan type. Check the Smart Fan Mode, the fan speed will change
according to the CPU or system temperature. Uncheck the Smart Fan Mode, the fan
will spin at maximum speed.

⚠ Important
Make sure fans are working properly after switching the PWM/ DC mode.

CPU_FAN1 PUMP_FAN1
1
1
SYS_FAN1

SYS_FAN2 PWM Mode pin definition

SYS_FAN3
Pin Signal Name Pin Signal Name

1 Ground 2 +12V
SYS_FAN6
3 Sense 4 Speed Control Signal

DC Mode pin definition

Pin Signal Name Pin Signal Name

SYS_FAN5 SYS_FAN4 1 Ground 2 Voltage Control

3 Sense 4 NC

Fan connector specifications

Connector Default fan mode Max. current Max. power

CPU_FAN1 Auto mode 3A 36W

PUMP_FAN1 PWM mode 3A 36W

SYS_FAN1~6 DC mode 2A 24W

45
JBAT1: Clear CMOS (Reset BIOS) Jumper
There is CMOS memory onboard that is external powered from a battery located on
the motherboard to save system configuration data. If you want to clear the system
configuration, set the jumpers to clear the CMOS memory.

Keep Data Clear CMOS/

(default) Reset BIOS

Resetting BIOS to default values

1. Power off the computer and unplug the power cord.
2. Use a jumper cap to short JBAT1 for about 5-10 seconds.
3. Remove the jumper cap from JBAT1.
4. Plug the power cord and Power on the computer.

46
JRGB1~2: RGB LED connectors
The JRGB connectors allow you to connect the 5050 RGB LED strips 12V.

Pin Signal Name Pin Signal Name

1 +12V 2 G

3 R 4 B

RGB LED Strip Connection

1
G R B

JRGB extension cable

JRGB connector 5050 RGB LED strips 12V

RGB LED Fan Connection

JRGB connector

1
G R B

System fan connector

RGB LED fan

⚠ Important
∙ The JRGB connector supports up to 2 meters continuous 5050 RGB LED strips
(12V/G/R/B) with the maximum power rating of 3A (12V).
∙ Always turn off the power supply and unplug the power cord from the power outlet
before installing or removing the RGB LED strip.
∙ Please use MSI’s software to control the extended LED strip.

47
JARGB_V2_1~2: A-RAINBOW V2 (ARGB Gen2) LED connectors
The JARGB_V2 connectors allow you to connect the ARGB Gen2 and the ARGB-based
LED strips. The JARGB_V2 connector supports up to 240 individually addressable RGB
LEDs with maximum power rating of 3A (5V).

Pin Signal Name Pin Signal Name

1 +5V 2 Data

3 No Pin 4 Ground

Addressable RGB LED Strip Connection

1
+5V
D

JARGB extension cable

JARGB_V2 connector ARGB/ ARGB Gen2 LED strip

Addressable RGB LED Fan Connection

JARGB_V2 connector

System Fan connector

ARGB/ ARGB Gen2 LED Fan

48
⚠ CAUTION
Do not connect the wrong type of LED strips. The JRGB connector and the JARGB_V2
connector provide different voltages, and connecting the ARGB 5V LED strip to the
JRGB connector will result in damage to the LED strip.

⚠ Important
∙ If you connect the ARGB Gen1 and ARGB Gen2 LED strips into the same connector, it
may cause some issues. Please do not mix the ARGB Gen1 LED and the ARGB Gen2
LED strips together.
∙ It is recommended that you install LED strips with the same specification to achieve
the best effects.
∙ Always turn off the power supply and unplug the power cord from the power outlet
before installing or removing the addressable RGB LED strip.
∙ Please use MSI’s software to control the extended LED strip.

EZ Debug LED
These LEDs indicate the debug status of the motherboard.

LED Color Status

Red CPU is not detected or fail

Yellow DRAM is not detected or fail

White GPU is not detected or fail

Green Booting device is not detected or fail

49
Installing OS, Drivers & MSI Center
Please download and update the latest utilities and drivers at www.msi.com

Installing Windows 10/ Windows 11

1. Power on the computer.
2. Insert the Windows 10/ Windows 11 installation disc/USB into your computer.
3. Press the Restart button on the computer case.
4. Press F11 key during the computer POST (Power-On Self Test) to get into Boot
Menu.
5. Select the Windows 10/ Windows 11 installation disc/USB from the Boot Menu.
6. Press any key if screen shows Press any key to boot from CD or DVD... message. If
not, please skip this step.
7. Follow the instructions on the screen to install Windows 10/ Windows 11.

50
Installing Drivers with MSI Driver Utility Installer

⚠ Important
∙ Some new network chips have not been natively supported by Windows 10/ Windows
11. It is recommended that the LAN driver be installed before installing drivers with
MSI Driver Utility Installer. Please refer to www.msi.com to install the LAN driver for
your motherboard.
∙ The MSI Driver Utility Installer will only pop up once. If you cancel or close it during
the process, please refer to the Live Update chapter of the MSI Center manual to
install the drivers. You can also go to www.msi.com to search your motherboard and
download the drivers.
∙ MSI Driver Utility Installer needs to be installed over the internet.
1. Start up your computer in Windows 10/ Windows 11.
2. Select Start > Settings > Windows Update, and then select Check for updates.
3. MSI Driver Utility Installer will pop up automatically.

4. Select the I have read and agree to the MSI Terms of Use check box, and then click
Next.

51
5. Check the Select All checkbox in the lower-left corner and click Install to install
MSI Center and drivers. The installation progress will be shown at the bottom.

6. Once the progress has completed, click Finish.

52
MSI Center
MSI Center is an application that helps you easily optimize game settings and
smoothly use content creation softwares. It also allows you to control and synchronize
LED light effects on PCs and other MSI products. With MSI Center, you can customize
ideal modes, monitor system performance, and adjust fan speed.

MSI Center User Guide

If you would like to know more information about MSI Center, please refer to
http://download.msi.com/manual/mb/MSICENTER.pdf
or scan the QR code to access.

⚠ Important
Functions may vary depending on the product you have.

53
UEFI BIOS
MSI UEFI BIOS is compatible with UEFI (Unified Extensible Firmware Interface)
architecture. UEFI has many new functions and advantages that traditional BIOS
cannot achieve, and it will completely replace BIOS in the future. The MSI UEFI
BIOS uses UEFI as the default boot mode to take full advantage of the new chipset’s
capabilities.

⚠ Important
The term BIOS in this user guide refers to UEFI BIOS unless otherwise noted.

UEFI advantages
∙ Fast booting - UEFI can directly boot the operating system and save the BIOS self-
test process. And also eliminates the time to switch to CSM mode during POST.
∙ Supports for hard drive partitions larger than 2 TB.
∙ Supports more than 4 primary partitions with a GUID Partition Table (GPT).
∙ Supports unlimited number of partitions.
∙ Supports full capabilities of new devices - new devices may not provide backward
compatibility.
∙ Supports secure startup - UEFI can check the validity of the operating system to
ensure that no malware tampers with the startup process.

Incompatible UEFI cases

∙ 32-bit Windows operating system - this motherboard supports only Windows 10/
Windows 11 64-bit operating system.
∙ Older graphics card - the system will detect your graphics card. If you use older
graphics cards, it may display a warning message There is no GOP (Graphics Output
protocol) support detected in this graphics card.

⚠ Important
We recommend that you replace it with a graphics card supporting GOP/UEFI or use
CPU with integrated graphics for having normal function.

How to check the BIOS mode?

1. Power on your computer.
2. Press Delete key, when the Press DEL key to enter Setup Menu, F11 to enter Boot
Menu message appears on the screen during the boot process.
3. After entering the BIOS, you can check the BIOS Mode at the top of the screen.

BIOS Mode: UEFI

54
BIOS Setup
The default settings offer the optimal performance for system stability in normal
conditions. You should always keep the default settings to avoid possible system
damage or failure booting unless you are familiar with BIOS.

⚠ Important
∙ BIOS items are continuously update for better system performance. Therefore,
the description may be slightly different from the latest BIOS and should be for
reference only. You could also refer to the HELP information panel for BIOS item
description.
∙ The BIOS screens, options and settings will vary depending on your system.

Entering BIOS Setup

Press Delete key, when the Press DEL key to enter Setup Menu, F11 to enter Boot
Menu message appears on the screen during the boot process.

Function key
F1: General Help list
F2: Add/ Remove a favorite item
F3: Enter Favorites menu
F4: Enter CPU Specifications menu
F5: Enter Memory-Z menu
F6: Load optimized defaults
F7: Switch between Advanced mode and EZ mode
F8: Load Overclocking Profile
F9: Save Overclocking Profile
F10: Save Change and Reset*
F12: Take a screenshot and save it to USB flash drive (FAT/ FAT32 format only).
Ctrl+F: Enter Search page
* When you press F10, a confirmation window appears and it provides the modification
information. Select between Yes or No to confirm your choice.

BIOS User Guide

If you’d like to know more instructions on setting up the BIOS, please refer
to https://download.msi.com/archive/mnu_exe/mb/AMDAM5BIOS.pdf
or scan the QR code to access.

⚠ Important
Functions may vary depending on the product you have.

55
Resetting BIOS
You might need to restore the default BIOS setting to solve certain problems. There
are several ways to reset BIOS:
∙ Go to BIOS and press F6 to load optimized defaults.
∙ Short the Clear CMOS jumper on the motherboard.

⚠ Important
Be sure the computer is off before clearing CMOS data. Please refer to the Clear
CMOS jumper section for resetting BIOS.

Updating BIOS
Updating BIOS with M-FLASH
Before updating:
Please download the latest BIOS file that matches your motherboard model from MSI
website. And then save the BIOS file into the USB flash drive.
Updating BIOS:
1. Switch to the target BIOS ROM by Multi-BIOS switch. Please skip this step if your
motherboard doesn’t has this switch.
2. Insert the USB flash drive that contains the update file into the USB port.
3. Please refer the following methods to enter flash mode.
• Reboot and press Ctrl + F5 key during POST and click on Yes to reboot the system.

Press <Ctrl+F5> to activate M-Flash for BIOS update.

• Reboot and press Del key during POST to enter BIOS. Click the M-FLASH button
and click on Yes to reboot the system.

4. Select a BIOS file to perform the BIOS update process.

5. When prompted click on Yes to start recovering BIOS.
6. After the flashing process is 100% completed, the system will reboot automatically.

56
Updating the BIOS with MSI Center
Before updating:
∙ Make sure the LAN driver is already installed and the internet connection is set
properly.
∙ Please close all other application software before updating the BIOS.
To update BIOS:
1. Install and launch MSI Center and go to Support page.
2. Select Live Update and click on Advance button.
3. Select the BIOS file and click on Install button.
4. The installation reminder will appear, then click the Install button.
5. The system will automatically restart to update BIOS.
6. After the flashing process is 100% completed, the system will restart
automatically.

Updating BIOS with Flash BIOS Button

1. Please download the latest BIOS file that matches your motherboard model from
the MSI® website.
2. Rename the BIOS file to MSI.ROM, and save it to the root of the USB storage device.
3. Connect the power supply to CPU_PWR1 and ATX_PWR1. (No need to install CPU
and memory.)
4. Plug the USB storage device that contains the MSI.ROM file into the Flash BIOS
Port on the rear I/O panel.
5. Press the Flash BIOS Button to flash BIOS, and the LED starts flashing.
6. The LED will be turned off when the process is completed.

57
Block Diagram

X670E GAMING PLUS WIFI

DDR5
DIMM A1/A2
PCIe 5.0x16 PCI_E1 CPU
DIMM B1/B2

GEN4 x4 M.2_2
GEN5 x4 M.2_1
(PCIe Only)
(PCIe Only)

DP 1.4 USB3.2 Gen2 10Gbps

(4K@60Hz) (Type-A)

HDMI 2.1 USB3.2 Gen1 5Gbps

(4K@60Hz) (Type-A)
PCIE x4

HD Audio USB3.2 Gen2 10Gbps

ALC897 (Type-A)

CHIPSET_A
USB3.2 Gen1 5Gbps USB3.2 Gen2x2 20Gbps
(Type-A) (Type-C)

USB2.0 GEN4 x4 M.2_3

(Rear Type-A) (PCIe Only)

SATA_P1,P2,P3 , P4

PCIE x4

PCIe 3.0x1 PCI_E2 USB2.0

CHIPSET_B (Front Type-A)

GEN4 x4 M.2_4
PCIe 4.0x1 PCI_E3
(PCIe Only)

PCIe 4.0x4 RTL8125BG

PCI_E4 2.5Gbps LAN

USB3.2 Gen1 5Gbps USB3.2 Gen2 10Gbps

(Front Type-A) (Front Type-C)

WiFi 6E

58
Regulatory Notices
FCC-B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and radiates radio frequency energy, and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
∙ Reorient or relocate the receiving antenna.
∙ Increase the separation between the equipment and receiver.
∙ Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.

NOTE
∙ The changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
∙ Shield interface cables and AC power cord, if any, must be used in order to comply
with the emission limits.

FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
∙ This device may not cause harmful interference.
∙ This device must accept any interference received, including interference that may
cause undesired operation.

MSI Computer Corp.

901 Canada Court, City of Industry, CA 91748, USA
(626)913-0828
www.msi.com

i
CE Conformity
Products bearing the CE marking comply with one or more of the
following EU Directives as may be applicable:
∙ RED 2014/53/EU
∙ Low Voltage Directive 2014/35/EU
∙ EMC Directive 2014/30/EU
∙ RoHS Directive 2011/65/EU
∙ ErP Directive 2009/125/EC
Compliance with these directives is assessed using applicable European Harmonized
Standards.
The point of contact for regulatory matters is MSI-Europe: Eindhoven 5706 5692 ER
Son.

Products with Radio Functionality (EMF)

This product incorporates a radio transmitting and receiving device. For computers
in normal use, a separation distance of 20 cm ensures that radio frequency exposure
levels comply with EU requirements. Products designed to be operated at closer
proximities, such as tablet computers, comply with applicable EU requirements in
typical operating positions. Products can be operated without maintaining a separation
distance unless otherwise indicated in instructions specific to the product.

Restrictions for Products with Radio Functionality

CAUTION: IEEE 802.11x wireless LAN with 5.15~5.35 GHz frequency
band is restricted for indoor use only in all European Union member
states, EFTA (Iceland, Norway, Liechtenstein), and most other European
countries (e.g., Switzerland, Turkey, Republic of Serbia). Using this WLAN
application outdoors might lead to interference issues with existing radio
services.

Radio frequency bands and maximum power levels

∙ Features: Wi-Fi 6E, BT
∙ Frequency Range: 2.4 GHz: 2400~2485MHz; 5 GHz: 5150~5350MHz,
5470~5725MHz, 5725~5850MHz; 6 GHz: 5955~6415MHz
∙ Max Power Level: 2.4 GHz: 20dBm; 5 GHz: 23dBm; 6 GHz: 23dBm

ii
Wireless Radio Use
This device is restricted to indoor use when operating in the 2.4GHz, 5GHz, 6GHz
frequency band.
Cet appareil doit être utilisé à l’intérieur.
당해 무선설비는 운용중 전파혼신 가능성이 있음.
この製品は、周波数帯域 2.4GHz, 5GHz, 6GHz で動作しているときは、屋内においてのみ使
用可能です。

NCC無線設備警告聲明
工作頻率2.4GHz, 5GHz, 6GHz該頻段限於室內使用。
經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、
加大功率或變更原設計之特性及功能。
低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即
停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通
信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。

Compliance Statement of Innovation, Science and

Economic Development Canada (ISED)
This device complies with with Innovation, Science and Economic Development
Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
Operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for
harmful interference to co-channel mobile satellite systems.
CAN ICES-003(B)/NMB-003(B)

Australia and New Zealand notice

This equipment incorporates a radio transmitting and receiving device. In normal use,
a separation distance of 20 cm ensures that radio frequency exposure levels comply
with the Australian and New Zealand Standards.

クラスB情報技術装置
この装置は、クラスＢ情報技術装置です。この装置は、家庭環境で使用することを目的とし
ていますが、この装置がラジオやテレビジョン受信機に近接して使用されると、受信障害を
引き起こすことがあります。取扱説明書に従って正しい取り扱いをして下さい。
VCCI-B

KC인증서
상호: (주)엠에스아이코리아
제품명: 메인보드
모델명: 10-7E16
제조년월: 2023년
R-R-MSI-10-7E16 제조자 및 제조국가: MSI/중국

iii
Battery Information
European Union:
Batteries, battery packs, and accumulators should not be disposed of as
unsorted household waste. Please use the public collection system to
return, recycle, or treat them in compliance with the local regulations.

BSMI:
廢電池請回收
For better environmental protection, waste batteries should be collected
separately for recycling or special disposal.

California, USA:
The button cell battery may contain perchlorate material and requires
special handling when recycled or disposed of in California.
For further information please visit:
https://dtsc.ca.gov/perchlorate/

WARNING
∙ INGESTION HAZARD: This product contains a button cell or coin battery.
∙ DEATH or serious injury can occur if ingested.
∙ A swallowed button cell or coin battery can cause Internal Chemical
Burns in as little as 2 hours.
∙ KEEP new and used batteries OUT OF REACH OF CHILDREN
∙ Seek immediate medical attention if a battery is suspected to be
swallowed or inserted inside any part of the body.

∙ Remove and immediately recycle or dispose of used batteries according to local

regulations and keep away from children. Do NOT dispose of batteries in household
trash or incinerate.
∙ Even used batteries may cause severe injury or death. Call a local poison control
center for treatment information.
∙ Battery type: CR2032
∙ Battery voltage: 3V
∙ Non-rechargeable batteries are not to be recharged.
∙ Do not force discharge, recharge, disassemble, heat above (manufacturer’s
specified temperature rating) or incinerate. Doing so may result in injury due to
venting, leakage or explosion resulting in chemical burns.
∙ This product contains an irreplaceable battery.
∙ This icon indicates that a swallowed button battery can cause serious injury or
death. Please keep batteries out of sight or reach of children.

iv
Chemical Substances Information
In compliance with chemical substances regulations, such as the EU REACH
Regulation (Regulation EC No. 1907/2006 of the European Parliament and the
Council), MSI provides the information of chemical substances in products at:
https://csr.msi.com/global/index

Environmental Policy
∙ The product has been designed to enable proper reuse of parts and
recycling and should not be thrown away at its end of life.
∙ Users should contact the local authorized point of collection for
recycling and disposing of their end-of-life products.
∙ Visit the MSI website and locate a nearby distributor for further recycling
information.
∙ Users may also reach us at [email protected] for information regarding proper
Disposal, Take-back, Recycling, and Disassembly of MSI products.

WEEE (Waste Electrical and Electronic Equipment)

Statement
ENGLISH
To protect the global environment and as an environmentalist, MSI must
remind you that...
Under the European Union (“EU”) Directive on Waste Electrical and
Electronic Equipment, Directive 2002/96/EC, which takes effect on August
13, 2005, products of “electrical and electronic equipment” cannot be
discarded as municipal wastes anymore, and manufacturers of covered
electronic equipment will be obligated to take back such products at the end of their
useful life. MSI will comply with the product take back requirements at the end of life
of MSI-branded products that are sold into the EU. You can return these products to
local collection points.

DEUTSCH
Hinweis von MSI zur Erhaltung und Schutz unserer Umwelt
Gemäß der Richtlinie 2002/96/EG über Elektro- und Elektronik-Altgeräte dürfen
Elektro- und Elektronik-Altgeräte nicht mehr als kommunale Abfälle entsorgt
werden. MSI hat europaweit verschiedene Sammel- und Recyclingunternehmen
beauftragt, die in die Europäische Union in Verkehr gebrachten Produkte, am Ende
seines Lebenszyklus zurückzunehmen. Bitte entsorgen Sie dieses Produkt zum
gegebenen Zeitpunkt ausschliesslich an einer lokalen Altgerätesammelstelle in Ihrer
Nähe.

FRANÇAIS
En tant qu’écologiste et afin de protéger l’environnement, MSI tient à rappeler ceci...
Au sujet de la directive européenne (EU) relative aux déchets des équipement
électriques et électroniques, directive 2002/96/EC, prenant effet le 13 août 2005,
que les produits électriques et électroniques ne peuvent être déposés dans les

v
décharges ou tout simplement mis à la poubelle. Les fabricants de ces équipements
seront obligés de récupérer certains produits en fin de vie. MSI prendra en compte
cette exigence relative au retour des produits en fin de vie au sein de la communauté
européenne. Par conséquent vous pouvez retourner localement ces matériels dans
les points de collecte.

РУССКИЙ
Компания MSI предпринимает активные действия по защите окружающей среды,
поэтому напоминаем вам, что....
В соответствии с директивой Европейского Союза (ЕС) по предотвращению
загрязнения окружающей среды использованным электрическим и электронным
оборудованием (директива WEEE 2002/96/EC), вступающей в силу 13 августа 2005
года, изделия, относящиеся к электрическому и электронному оборудованию,
не могут рассматриваться как бытовой мусор, поэтому производители
вышеперечисленного электронного оборудования обязаны принимать его для
переработки по окончании срока службы. MSI обязуется соблюдать требования по
приему продукции, проданной под маркой MSI на территории EC, в переработку по
окончании срока службы. Вы можете вернуть эти изделия в специализированные
пункты приема.

ESPAÑOL
MSI como empresa comprometida con la protección del medio ambiente, recomienda:
Bajo la directiva 2002/96/EC de la Unión Europea en materia de desechos y/o
equipos electrónicos, con fecha de rigor desde el 13 de agosto de 2005, los productos
clasificados como “eléctricos y equipos electrónicos” no pueden ser depositados en
los contenedores habituales de su municipio, los fabricantes de equipos electrónicos,
están obligados a hacerse cargo de dichos productos al termino de su período de vida.
MSI estará comprometido con los términos de recogida de sus productos vendidos en
la Unión Europea al final de su periodo de vida. Usted debe depositar estos productos
en el punto limpio establecido por el ayuntamiento de su localidad o entregar a una
empresa autorizada para la recogida de estos residuos.

NEDERLANDS
Om het milieu te beschermen, wil MSI u eraan herinneren dat….
De richtlijn van de Europese Unie (EU) met betrekking tot Vervuiling van Electrische
en Electronische producten (2002/96/EC), die op 13 Augustus 2005 in zal gaan kunnen
niet meer beschouwd worden als vervuiling. Fabrikanten van dit soort producten
worden verplicht om producten retour te nemen aan het eind van hun levenscyclus.
MSI zal overeenkomstig de richtlijn handelen voor de producten die de merknaam MSI
dragen en verkocht zijn in de EU. Deze goederen kunnen geretourneerd worden op
lokale inzamelingspunten.

SRPSKI
Da bi zaštitili prirodnu sredinu, i kao preduzeće koje vodi računa o okolini i prirodnoj
sredini, MSI mora da vas podesti da…
Po Direktivi Evropske unije (“EU”) o odbačenoj ekektronskoj i električnoj opremi,
Direktiva 2002/96/EC, koja stupa na snagu od 13. Avgusta 2005, proizvodi koji spadaju
pod “elektronsku i električnu opremu” ne mogu više biti odbačeni kao običan otpad i
proizvođači ove opreme biće prinuđeni da uzmu natrag ove proizvode na kraju njihovog
uobičajenog veka trajanja. MSI će poštovati zahtev o preuzimanju ovakvih proizvoda

vi
kojima je istekao vek trajanja, koji imaju MSI oznaku i koji su prodati u EU. Ove
proizvode možete vratiti na lokalnim mestima za prikupljanje.

POLSKI
Aby chronić nasze środowisko naturalne oraz jako firma dbająca o ekologię, MSI
przypomina, że...Zgodnie z Dyrektywą Unii Europejskiej (“UE”) dotyczącą odpadów
produktów elektrycznych i elektronicznych (Dyrektywa 2002/96/EC), która wchodzi w
życie 13 sierpnia 2005, tzw. “produkty oraz wyposażenie elektryczne i elektroniczne “
nie mogą być traktowane jako śmieci komunalne, tak więc producenci tych produktów
będą zobowiązani do odbierania ich w momencie gdy produkt jest wycofywany z
użycia. MSI wypełni wymagania UE, przyjmując produkty (sprzedawane na terenie
Unii Europejskiej) wycofywane z użycia. Produkty MSI będzie można zwracać w
wyznaczonych punktach zbiorczych.

TÜRKÇE
Çevreci özelliğiyle bilinen MSI dünyada çevreyi korumak için hatırlatır:
Avrupa Birliği (AB) Kararnamesi Elektrik ve Elektronik Malzeme Atığı, 2002/96/
EC Kararnamesi altında 13 Ağustos 2005 tarihinden itibaren geçerli olmak üzere,
elektrikli ve elektronik malzemeler diğer atıklar gibi çöpe atılamayacak ve bu
elektonik cihazların üreticileri, cihazların kullanım süreleri bittikten sonra ürünleri
geri toplamakla yükümlü olacaktır. Avrupa Birliği’ne satılan MSI markalı ürünlerin
kullanım süreleri bittiğinde MSI ürünlerin geri alınması isteği ile işbirliği içerisinde
olacaktır. Ürünlerinizi yerel toplama noktalarına bırakabilirsiniz.

ČESKY
Záleží nám na ochraně životního prostředí - společnost MSI upozorňuje...
Podle směrnice Evropské unie (“EU”) o likvidaci elektrických a elektronických výrobků
2002/96/EC platné od 13. srpna 2005 je zakázáno likvidovat “elektrické a elektronické
výrobky” v běžném komunálním odpadu a výrobci elektronických výrobků, na které
se tato směrnice vztahuje, budou povinni odebírat takové výrobky zpět po skončení
jejich životnosti. Společnost MSI splní požadavky na odebírání výrobků značky MSI,
prodávaných v zemích EU, po skončení jejich životnosti. Tyto výrobky můžete odevzdat
v místních sběrnách.

MAGYAR
Annak érdekében, hogy környezetünket megvédjük, illetve környezetvédőként fellépve
az MSI emlékezteti Önt, hogy ...
Az Európai Unió („EU”) 2005. augusztus 13-án hatályba lépő, az elektromos és
elektronikus berendezések hulladékairól szóló 2002/96/EK irányelve szerint az
elektromos és elektronikus berendezések többé nem kezelhetőek lakossági
hulladékként, és az ilyen elektronikus berendezések gyártói kötelessé válnak az
ilyen termékek visszavételére azok hasznos élettartama végén. Az MSI betartja
a termékvisszavétellel kapcsolatos követelményeket az MSI márkanév alatt az
EU-n belül értékesített termékek esetében, azok élettartamának végén. Az ilyen
termékeket a legközelebbi gyűjtőhelyre viheti.

ITALIANO
Per proteggere l’ambiente, MSI, da sempre amica della natura, ti ricorda che….
In base alla Direttiva dell’Unione Europea (EU) sullo Smaltimento dei Materiali
Elettrici ed Elettronici, Direttiva 2002/96/EC in vigore dal 13 Agosto 2005, prodotti

vii
appartenenti alla categoria dei Materiali Elettrici ed Elettronici non possono più
essere eliminati come rifiuti municipali: i produttori di detti materiali saranno obbligati
a ritirare ogni prodotto alla fine del suo ciclo di vita. MSI si adeguerà a tale Direttiva
ritirando tutti i prodotti marchiati MSI che sono stati venduti all’interno dell’Unione
Europea alla fine del loro ciclo di vita. È possibile portare i prodotti nel più vicino punto
di raccolta

日本JIS C 0950材質宣言
日本工業規格JIS C 0950により、2006年7月1日以降に販売される特定分野の電気および
電子機器について、製造者による含有物質の表示が義務付けられます。
https://csr.msi.com/tw/Japan-JIS-C-0950-Material-Declarations

India RoHS
This product complies with the “India E-waste (Management and Handling) Rule 2011”
and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01
weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.

Türkiye EEE yönetmeliği

Türkiye Cumhuriyeti: EEE Yönetmeliğine Uygundur

Україна обмеження на наявність небезпечних речовин

Обладнання відповідає вимогам Технічного регламенту щодо обмеження
використання деяких небезпечних речовин в електричному та електронному
обладнані, затвердженого постановою Кабінету Міністрів України від 3 грудня 2008
№ 1057.

Việt Nam RoHS

Kể từ ngày 01/12/2012, tất cả các sản phẩm do công ty MSI sản xuất tuân thủ Thông tư
số 30/2011/TT-BCT quy định tạm thời về giới hạn hàm lượng cho phép của một số hóa
chất độc hại có trong các sản phẩm điện, điện tử”

viii
MS-7E16主板产品中有害物质的名称及含量
有害物质
部件名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚
(Pb) (Hg) (Cd) (Cr(VI)) (PBB) (PBDE)
印刷电路板组件* ╳ ○ ○ ○ ○ ○
纽扣电池 ○ ○ ○ ○ ○ ○
外部信号连接头 ╳ ○ ○ ○ ○ ○
其他 (例: 线材等) ╳ ○ ○ ○ ○ ○
本表格依据 SJ/T 11364 的规定编制。
○: 表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572 规定的限量要
求以下。
╳: 表示该有害物质至少在该部件的某一均质材料中的含量超出 GB/T 26572 规定的限
量要求，但所有部件都符合欧盟RoHS要求。
* 印刷电路板组件: 包括印刷电路板及其构成的零部件。
■ 上述有毒有害物质或元素清单会依型号之部件差异而有所增减。
■ 产品部件本体上如有环保使用期限标识，以本体标识为主。

限用物質含有情況標示聲明書
設備名稱：電腦主機板 型號(型式)：MS-7E16
限用物質及其化學符號
單元 鉛 汞 鎘 六價鉻 多溴聯苯 多溴二苯醚
(Pb) (Hg) (Cd) (Cr+6) (PBB) (PBDE)
電路板 ○ ○ ○ ○ ○ ○
電子元件 ─ ○ ○ ○ ○ ○
金屬機構件 ─ ○ ○ ○ ○ ○
塑膠機構件 ○ ○ ○ ○ ○ ○
備考1. “超出0.1 wt %” 及 “超出0.01 wt %” 係指限用物質之百分比含量超出百分比含
量基準值。
備考2. “○” 係指該項限用物質之百分比含量未超出百分比含量基準值。
備考3. “─” 係指該項限用物質為排除項目。

ix
Copyright and Trademarks Notice

Copyright © Micro-Star Int’l Co., Ltd. All rights reserved. The MSI logo used is
a registered trademark of Micro-Star Int’l Co., Ltd. All other marks and names
mentioned may be trademarks of their respective owners. No warranty as to accuracy
or completeness is expressed or implied. MSI reserves the right to make changes to
this document without prior notice.

The terms HDMI™, HDMI™ High-Definition Multimedia Interface, HDMI™ Trade dress
and the HDMI™ Logos are trademarks or registered trademarks of HDMI™ Licensing
Administrator, Inc.

Technical Support
If a problem arises with your system and no solution can be obtained from the user
guide, please contact your place of purchase or local distributor. Alternatively, please
try the following help resources for further guidance.
∙ Visit the MSI website for technical guide, BIOS updates, driver updates, and other
information: http://www.msi.com
∙ Register your product at: http://register.msi.com

Revision History
∙ Version 1.0, 2023/12, First release.
∙ Version 1.1, 2024/02, Add battery safety warning.