BE End Suction Single-Stage

Centrifugal Pump
50 Hz
Applications
Sulzer process pumps, series BE, is specially designed for pulp
and paper applications, e.g. - paper, tissue and board machines,
chemical-, mechanical- and recycled fibre lines, chemical
recovery as well as effluent treatment plant etc.
They are also very well suited for general industry and waste-
water applications.

Design
The BE series includes 39 pump sizes and is built on a modular
design, which offer high interchangeability, simplified service
and a low number of spare parts. This means that low mainte-
nance costs can be obtained.

Pump casing
Rugged BE pump construction creates longterm, wear resist-
ance. The generous wall thickness and the casing’s smooth,
pocket-free interior protect against erosion and corrosion.

Impeller
The impellers can handle almost any suspensions and a huge
range of slurries. The pumps are available with semi-open
impellers. A new hydraulic design for semi-open impellers
features large free passages. The sturdy construction ensures
high wear resistance, resists corrosion and reduces sensitivity
to foreign objects.
When the BE pumps is used as medium sized fan- or dilu- Shaft
tion pumps, ESDF impellers, special low pulsations impellers The shafts are sturdy, with a deflection of less than 0.05 mm at
are used. the seal areas under normal running conditions. All shafts are
For some sizes vortex impellers can also be selected. These protected by a replaceable sleeve in stainless steel or higher
impellers have an improved vane design offering clogless and quality alloys.
trouble-free operation.
A hexagonal shaft secures the impeller fixing, giving stable op- Shaft seals
eration conditions and long MTBF (Mean Time Between Failure). The alternatives include single and double mechanical seals,
gland packing and dynamic seals, with a variety of material to
Wear disc suit every application.
The wear disc is replaceable and can be easily adjusted from
the pump casing’s front. This makes it easy to maintain high ef- Bearing assembly
ficiency over the entire lifetime of the pump and ensures shorter The bearing assembly of a BE pump features a sturdy design
MTTR (Mean Time To Repair). The sealing of the pump casing that ensures long MTBF, long pump lifetime and low maintenance
has also been improved. costs. Six different bearing sizes cover all pump in the series, and
all bearings have angular contact ball bearings at the driven end.
Standard bearing assemblies are lubricated with grease,
though oil is also an option. On oil-lubricated bearing assemblies,
two inspection eyes are standard. This makes it easy to inspect
the bearing assembly from both sides.

Your benefits

Large energy savings. Improved hydraulic design cre-

ates greater efficiency in each individual pump minimising
the average power consumption.

Total reliability. Robust design, secure impeller fastening

and sturdy bearing assembly ensure long pump lifetime.
Better performance coverage for better runnability gives
exceptional MTBF.

Simplified service. Smart pump design with mainte-

nance-reducing features. Modular construction with few
parts to service and store.
Properties Type designations
Capacity BE 315-1025
20-6500 m3/h
BE Pump series
Head 3 Bearing assembly size
5-160m
15 Suction size (cm), DN1
Temperature
10 Discharge size (cm), DN2
Max. 190°C
(with grease lubrication) 25 Impeller size (cm)
Bearing assembly sizes
Pressure rating 1 2 3 4 5 6
PN6/PN10/PN16 Performance curves
Flanges
ISO 7005 PN10-PN16
(BS 4504-ANSI 150-JIS
10K-16K)
Lubrication
Grease; oil as option
Specification
ISO 5199 ”Technical spec. for
centrifugal pumps class II”
Dimension
For applicable sizes acc. to
ISO 2858 except ”g” dimen-
sion.

Installation versions, executions

Baseframes are also available. Options; 1 ) Levelling pads, 2) Rubber mat

Material
Standard material combinations Material combinations
Code 03 05 24 08 09 21 23 25 26 27 28 30 32

Pump Grey cast Grey cast Duplex Ductile iron Ductile iron Stainl. steel Duplex Duplex Aus. stainl. Aus. stainl. Duplex Super duplex Nickel alloy
casing iron iron steel A395 60- A395 60- S2399 steel steel steel steel steel steel A494 CW-
A48 CL A48 CL A890 3A 40-18 40-18 A890 3A A890 1B ASTM 743 ASTM 743 A890 4A A890 5A 12MW
30 B 30 B CF-8M CN-7M

Casing Ductile iron Ductile iron Aus. stainl. Ductile iron Ductile iron Stainl. steel Aus. stainl. Aus. stainl. Aus. stainl. Aus. stainl. Duplex Super duplex Nickel alloy
cover A395 60- A395 60- steel A395 60- A395 60- S2399 steel steel steel steel steel steel A494 CW-
40-18 40-18 ASTM 743 40-18 40-18 ASTM 743 ASTM 743 ASTM 743 ASTM 743 A890 4A A890 5A 12MW
CF-8M CF-8M CN-7M CF-8M CN-7M

Wear Grey cast Duplex Duplex Ductile iron Duplex Stainl. steel Stainl. steel Duplex Aus. stainl. Aus. stainl. Duplex Super duplex Nickel alloy
disc iron steel steel A395 60- steel S2399 S2399 steel steel steel steel steel A494 CW-
A48 CL A890 3A A890 3A 40-18 A890 3A A890 1B ASTM 743 ASTM 743 A890 4A A890 5A 12MW
30 B CF-8M CN-7M

Impeller Duplex Duplex Duplex Duplex Duplex Stainl. steel Stainl. steel Duplex Aus. stainl. Aus. stainl. Duplex Super duplex Nickel alloy
steel steel steel steel steel S2399 S2399 steel steel steel steel steel A494 CW-
A890 3A A890 3A A890 3A A890 3A A890 3A A890 1B ASTM 743 ASTM 743 A890 4A A890 5A 12MW
CF-8M CN-7M

Shaft Duplex Duplex Duplex Duplex Duplex Duplex Duplex Duplex Duplex Duplex Duplex Duplex steel Duplex
steel steel steel steel steel steel steel steel steel steel steel EN EN 1.4460 steel
EN 1.4460 EN 1.4460 EN 1.4460 EN 1.4460 EN 1.4460 EN 1.4460 EN 1.4460 EN 1.4460 EN 1.4460 EN 1.4460 1.4460 EN 1.4460

Shaft Duplex Duplex Duplex Duplex Duplex Duplex Duplex Aus. stainl. Duplex Aus. stainl. Duplex Super Nickel alloy
sleeve steel steel steel steel steel steel steel steel steel steel steel austenitic Hastelloy
EN 1.4460 EN 1.4460 EN 1.4460 EN 1.4460 EN 1.4460 EN 1.4460 EN 1.4460 EN 1.4539 EN 1.4460 EN 1.4539 EN 1.4462 EN 1.4547 C 276

www.sulzer.com
E10113 en 01.2014, © Sulzer Pumps

This data sheet is a general presentation. It does not provide any warranty or guarantee of any kind. Please, contact us for a description of the warranties and guarantees offered with
our products. Directions for use and safety will be given separately. All information herein is subject to change without notice.