Scribd Logo
Upload

Welcome to Scribd!

  • 12 views

    Anti-Slint 67500

    Uploaded by

    Shahrul Azmir Zamani

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Anti-Slint 67500

    Uploaded by

    Shahrul Azmir Zamani
    12 views1 page

    Original Title

    916. Anti-Slint 67500

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    12 views1 page

    Anti-Slint 67500

    Uploaded by

    Shahrul Azmir Zamani

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 1

    Product Data 1/1

    HEMPEL’S ANTI-SLINT®67500

    Description: HEMPEL’S ANTI-SLINT 67500 is flame dried silica sand of which the average particle
    size is approximately 0.5 millimetre.

    Recommended use: To obtain anti-skid properties on decks and other areas where a skid-proof surface is
    required.

    Availability: Part of Group Assortment. Local availability subject to confirmation.

    PHYSICAL CONSTANTS:
    Colour: Greyish
    Specific gravity: 2.7 (approx.) kg/litre
    Particle shape: Grit

    Remarks: Being heavy and rather coarse HEMPEL’S ANTI-SLINT 67500 should not be stirred into
    the paint before its application. For such purpose use HEMPEL'S ANTI-SLIP BEADS
    67420.
    HEMPEL’S ANTI-SLINT 67500 should be sprinkled evenly on the surface immediately
    upon application of the penultimate coat of the paint system while the paint is still wet.
    Consumption approximately 2.5 kg/5.5 lbs of HEMPEL’S ANTI-SLINT 67500 to 25
    sq.m/ 270 sq.feet.
    When the paint is dry, sweep up surplus grit and apply the final coat.
    HEMPEL’S ANTI-SLINT 67500 should be kept dry and clean.
    Do not mix contaminated sweepings with new supplies.

    Note: HEMPEL'S ANTI-SLINT 67500 is for professional use only.

    Safety: Handle with care. Before and during use, observe all safety labels on packaging and
    paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
    national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
    not swallow. Take precautions against possible risks of fire or explosions as well as
    protection of the environment. Apply only in well ventilated areas.

    ISSUED BY: HEMPEL A/S

    This Product Data Sheet supersedes those previously issued.


    For explanations, definitions and scope, see “Explanatory Notes” in the HEMPEL Book.
    Data, specifications, directions and recommendations given in this data sheet represent only test results or
    experience obtained under controlled or specially defined circumstances. Their accuracy, completeness or appro-
    priateness under the actual conditions of any intended use of the Products herein must be determined exclusively
    by the Buyer and/or User.
    The Products are supplied and all technical assistance is given subject to HEMPEL's GENERAL CONDITIONS OF
    SALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in writing. The Manufacturer and Seller
    disclaim, and Buyer and/or User waive all claims involving, any liability, including but not limited to negligence,
    except as expressed in said GENERAL CONDITIONS for all results, injury or direct or consequential losses or
    damages arising from the use of the Products as recommended above, on the overleaf or otherwise.
    Product data are subject to change without notice and become void five years from the date of issue.

    Issued: November 2003 Page 1 of 1


    HEMPEL
    Product Data Sheet

    You might also like