Scribd Logo
Upload

Welcome to Scribd!

  • 11 views

    Borstar HDPE FB1520

    Uploaded by

    Jucy A
    Borouge HDPE Film grade FB1520

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Borstar HDPE FB1520

    Uploaded by

    Jucy A
    11 views3 pages
    Borouge HDPE Film grade FB1520

    Original Title

    Borstar_HDPE_FB1520

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Borouge HDPE Film grade FB1520

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    11 views3 pages

    Borstar HDPE FB1520

    Uploaded by

    Jucy A
    Borouge HDPE Film grade FB1520

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    Polyethylene Borstar® FB1520

    Product Data Sheet


    Sept 2015

    Polyethylene
    Borstar® FB1520
    HIGH DENSITY POLYETHYLENE FOR HIGH PERFORMANCE FLEXIBLE PACKAGING

    DESCRIPTION

    ®
    Borstar FB1520 is high density film grade produced using the proprietary Borstar bimodal technology
    combining superior physical properties with excellent process ability. The product gives a strong and stiff film
    with high consistency. Material properties are best realized by processing at HDPE conditions.
    ®
    Borstar FB1520 contains antioxidant.

    APPLICATIONS

    Mono layer & co-extrusion films Exclusive Carrier/Boutique bags


    Thin protection film Thin bags
    Heavy duty bags Industrial Liners
    Food packaging

    SPECIAL FEATURES

    Easy processability Excellent draw down


    Excellent impact strength – stiffness balance Bubble stability

    PHYSICAL PROPERTIES

    Property Typical Value Unit Test Method


    Density 952 Kg/m³ ASTM D792
    Melt Flow Rate MFR (190 °C/2.16 kg) <0.1 g/10min ASTM D1238
    Melt Flow Rate MFR (190 °C/5.0 kg) 0.25 g/10min ASTM D1238
    Melt Flow Rate MFR (190 °C/21 kg) 7 g/10min ASTM D1238
    Melting Temp. 133 °C ISO 11357/03
    Vicat Softening Temperature A50 (10 N) 129 °C ISO 306
    ESCR – 10% lgepal / F50 >1000 Hours ASTM D 1693

    *Data should not be used for specification work


    Polyethylene Borstar® FB1520

    FILM PROPERTIES

    Property Typical Value Unit Test Method


    Tensile Strength at Break MD/TD 90/80 MPa ISO 527-3
    Elongation at Break MD/TD 350/450 % ISO 527-3
    Tensile Strength at Yield TD 35 MPa ISO 527-3
    Tensile Modulus MD/TD 800/900 MPa ASTM D 882
    Dart Drop 350 g ASTM D 1709/A
    Elmendorf Tear Strength MD/TD 20/40 g ASTM D 1922
    Puncture Resistance, force 30 N ASTM D 5748
    Puncture Resistance, energy 0.7 J ASTM D 5748

    *Data should not be used for specification work


    **The film properties are dependent on extrusion conditions.
    Film properties: 15µm, BUR = 4:1, Neck Height = 8DD, Die gap 1.2mm

    PROCESSING GUIDELINES
    ®
    Borstar FB1520 should be processed in HDPE film extruders in order to obtain optimal processing
    performance and mechanical properties.

    Recommended processing conditions:


    Melt temperature: 210 - 230°C
    Neck height: >5 x die diameter
    Blow up ratio >3:1

    FOOD CONTACT REGULATIONS


    ®
    Borstar FB1520 fulfils the food contact regulations in most countries. If required, contact your Borouge
    representative for a certificate.

    STORAGE

    The product should be stored in dry conditions at temperatures below 50°C and protected from UV-light.
    Improper storage can initiate degradation, which results in odour generation and colour changes and can have
    negative effects on the physical properties of this product.

    More information on storage can be found in Safety Information Sheet for this product.
    Polyethylene Borstar® FB1520

    SAFETY

    The product is not classified as a hazardous mixture.

    Dust and fines from the product carry a risk of dust explosion. All equipment should be properly earthed.
    Inhalation of dust should be avoided as it may cause irritation of the respiratory system. Small amounts of
    fumes are generated during processing of the product. Proper ventilation is therefore required.

    A Safety Information Sheet is available on request. Please contact your Borouge representative for more
    details on various aspects of safety, recovery and disposal of the product.

    RECYCLING

    The product is suitable for recycling using modern methods of shredding and cleaning. In-house production
    waste should be kept clean to facilitate direct recycling.

    RELATED DOCUMENTS

    Most datasheets and statements are available on Borouge website www.borouge.com.


    If more information is required, please contact a Borouge representative for information.

    DISCLAIMER

    The product(s) mentioned herein are not intended to be used for medical, pharmaceutical or healthcare applications and we do not
    support their use for such applications.

    To the best of our knowledge, the information contained herein is accurate and reliable as of the date of publication, however we do not assume
    any liability whatsoever for the accuracy and completeness of such information.
    Borouge makes no warranties which extend beyond the description contained herein. Nothing herein shall constitute any warranty of
    merchantability or fitness for a particular purpose.
    It is the customer's responsibility to inspect and test our products in order to satisfy itself as to the suitability of the products for the customer's
    particular purpose. The customer is responsible for the appropriate, safe and legal use, processing and handling of our products.

    No liability can be accepted in respect of the use of Borouge products in conjunction with other materials. The information contained herein relates
    exclusively to our products when not used in conjunction with any third party materials.

    You might also like