Multi-turn Bevel Gear Operators for Manual Operation and Electrical Actuation

ATB Series

Description Features
• Robust and compact design with aesthetically pleasing look • Housing material options (carbon steel / stainless steel)
• Widely used on valves for oil and gas, chemical, power, • Pinions, fasteners and hand wheel material option available in
waterworks, sewage, etc. stainless steel
• 12 models up to a torque of 18,000 Nm and thrust of 1000 • Bevel gear material option available in aluminum bronze
kN and F-48 mounting base • High temperature variant up to +200°C (+392°F) & low
• Grease filled for life temperature variant up to -52°C (-61.6°F) available
• Unique top entry replaceable stem nut in aluminum bronze • Marine application (all exposed shafts and fasteners in stainless
material for corrosion and wear resistance steel)
• Fully sealed gearbox and completely enclosed gearing • Finish painting available on request
• IP-67 standard enclosure • Padlock arrangement option available
• Ductile iron casing for higher strength and alloy steel • Input flange with various mountings as per ISO 5211 available
pinions for electric actuation
• High performance roller bearings at input and thrust • Extension shaft for buried service available
bearings on output • Auxiliary spur / bevel input reducers available in single reduction
• Epoxy primer coating is standard / double reduction options
• Powder coated handwheels for smooth and easy operation • Twin shaft versions available on bevel gearboxes with single
• Removable adaptor option available for easy stocking of reduction and double reduction auxiliary spur reducers
gears • Dual Input (90°) / multiple input option available on all models
• Additional spur and bevel configurations available to • Chain wheel operation
reduce rim pull / input effort and also for ‘top operating’ • Top operating option available
requirement • Lost motion option available (hammer blow)
• Medium thrust version available up to 2600 kN
• Non-thrust option available (torque only) on all models ‘B’ type
Multi-turn Bevel Gear Operators for Manual Operation and Electrical Actuation

ATB Series (A-Type, Standard Thrust)

Electrical Actuation Flange Mounting For All Models Sr No. Description Material US Standard IS Standard
1 Housing Ductile Iron ASTM A536 60-40-18 SGI 400/15
2 Base Plate Ductile Iron ASTM A536 60-40-18 SGI 400/15
Actuator Mounting ISO 5211 Ød 3 Bevel Gear Carbon Steel ASTM A322 4140 40Cr4Mo3
F10 0.98 4 Bevel Pinion Carbon Steel ASTM A322 4140 40Cr4Mo3
5 Thrust Bearing Special Steel Ball Thrust Bearing
F14 1.18
6 Flange Cap Ductile Iron ASTM A536 60-40-18 SGI 400/15
F16 1.38 7 Adaptor Sleeve Ductile Iron ASTM A536 70-50-05 SGI 500/7
8 Adaptor Bronze B148 C95800 -
9 Hardware Carbon Steel - 8.8 Gr or Equivalent
Flange Drill As Per ISO 5211 Keyway As Per IS 2048 10 Stem Protector Carbon Steel ASTM A53 IS 2062 Gr B
11 Handwheel (Pipe) Carbon Steel ASTM A53 IS 2062 Gr B
12 Lock Nut Carbon Steel ASTM A576 1045 45C8

Opt.
Valve
Rated Valve Max.
Input Mtg. Max. Recom. App.
Output Mech. Mtg. Stem
Model Ratio Torque Flange Thrust A B C D E F ØG H J ØK ØL M N Hand- Wgt. Thread Size
Torque Adv. Flange Dia.
(lb-in) ISO (lbf) wheel (lbs)
(lb-in) ISO (ØD)
5211
5211

1 1/2"X11TPI
ATB-01 1:1 1327.61 0.9 1469.22 F07/F10 -- Ø0.98 12364.49 5.31 4.13 3.46 6.77 2.60 2.28 Ø1.06 1.93 1.57 Ø1.06 Ø0.98 0.31 1.38 Ø11.81 17.64
BSP
ATB-02 2.5:1 2212.69 2.25 982.43 F10/F12 -- Ø1.18 17984.72 5.91 4.33 3.94 7.28 2.60 2.28 Ø1.26 2.38 1.69 Ø1.26 Ø0.98 0.31 1.38 Ø11.81 26.46 2"X11TPI BSP
ATB-03 3:1 3540.30 2.7 1309.91 F10/F12 F14 Ø1.57 26977.07 6.65 4.45 4.33 7.91 2.60 2.28 Ø1.65 2.54 1.89 Ø1.61 Ø1.18 0.31 1.38 Ø15.75 36.11 2"X11TPI BSP
ATB-06 3.25:1 5310.45 2.92 1814.40 F12/F14 F16 Ø1.97 35969.43 7.60 4.80 4.25 7.36 2.60 2.28 Ø2.09 2.85 2.20 Ø2.20 Ø1.18 0.31 1.38 Ø19.69 39.68 2.5"X11TPI BSP
ATB-11 4:1 9735.82 3.6 2699.48 F14/F16 -- Ø2.17 44961.79 8.98 5.71 5.47 8.54 2.60 2.28 Ø2.20 3.37 2.44 Ø2.17 Ø1.18 0.31 1.38 Ø23.62 82.23 3"X11TPI BSP
ATB-16 4.5:1 14161.19 4.05 3496.04 F16/F20 F25 Ø2.68 65194.59 10.83 6.61 6.54 10.00 2.60 2.28 Ø2.95 4.25 3.05 Ø2.95 Ø1.18 0.31 1.38 Ø23.62 82.23 3.5"X11TPI BSP
ATB-23 5:1 22126.86 4.5 4921.01 F20/F25 F30 Ø3.23 78683.13 13.19 6.85 7.60 11.06 2.60 2.28 Ø3.35 4.31 3.29 Ø2.95 Ø1.18 0.31 1.38 Ø23.62 110.23 4"X11TPI BSP
ATB-38 5.5:1 33632.83 4.95 6797.37 F25/F30 F35 Ø3.74 89923.58 14.80 7.95 8.66 12.72 2.60 2.28 Ø3.54 5.33 3.94 Ø3.54 Ø1.50 0.39 1.38 Ø23.62 179.68 5"X11TPI BSP
ATB-55 6:1 48679.10 5.4 9010.06 F30/F35 F40 Ø4.13 101164.02 17.01 9.25 9.69 13.86 2.76 2.36 Ø4.37 6.04 4.13 Ø4.17 Ø1.50 0.39 1.38 Ø29.53 341.72 5"X11TPI BSP
ATB-85 6.5:1 75231.34 5.85 12851.28 F35/F40 -- Ø4.92 119148.74 19.29 10.20 10.51 14.65 2.76 2.36 Ø4.96 6.52 4.33 Ø4.96 Ø1.50 0.39 1.38 Ø29.53 407.85 6"X11TPI BSP
ATB-130 7:1 115059.69 6.3 18259.09 F35/F40 -- Ø5.71 157366.26 23.23 11.42 13.39 18.43 2.76 2.36 Ø5.91 7.44 5.57 Ø5.91 Ø1.97 0.55 1.97 Ø29.53 617.29 M218X3P
ATB-180 8:1 159313.42 7.2 22126.86 F40 F48 Ø6.69 224808.94 26.77 12.72 15.35 20.16 2.76 2.36 Ø7.09 7.85 5.91 Ø7.09 Ø1.97 0.55 1.97 Ø29.53 793.66 M218X3P
Multi-turn Bevel Gear Operators for Manual Operation and Electrical Actuation

ATB-1S Series (A-Type, Standard Thrust)

Electrical Actuation Flange Mounting For All Models Sr. No. Description Material US Standard IS Standard
1 Housing Ductile Iron ASTM A536 60-40-18 SGI 400/15
2 Base Plate Ductile Iron ASTM A536 60-40-18 SGI 400/15
3 Bevel Gear Carbon Steel ASTM A322 4140 40CrMo3
Actuator Mounting ISO 5211 Ød
4 Bevel Pinion Carbon Steel ASTM A322 4140 40CrMo3
F10 0.98 5 Thrust Bearing Special Steel Cylindrical Roller Bearing
F14 1.18 6 Adaptor Sleeve Ductile Iron ASTM A536 70-50-05 SGI 500/7
7 Adaptor Bronze B148 C95800 -
F16 1.38
8 Spur Housing Ductile Iron ASTM A536 60-40-18 SGI 400/15
9 Spur Cover Ductile Iron ASTM A536 60-40-18 SGI 400/15
10 Input Pinion Carbon Steel ASTM A322 4140 40CrMo3
Flange Drill As Per ISO 5211 Keyway As Per IS 2048 11 Spur Gear Carbon Steel ASTM A322 4140 40CrMo3
12 Hardware Carbon Steel - 8.8 Gr or Equivalent
13 Stem Protector Carbon Steel ASTM A53 IS 2062 Gr B
14 Handwheel Carbon Steel ASTM A53 IS 2062 Gr B
15 Locknut Carbon Steel ASTM A576 1045 45C8

Optional
Valve
Rated Valve
Input MTG Max Stem Max Approx
Output Mech. MTG Reco.
Model Ratio Torque Flange Diameter Thrust A B C D E F G H ØI J ØK L M N O Weight Thread Size
Torque Adv. Flange H.wheel
(lb-in) ISO (ØD) (lbf) (lbs)
(lb-in) ISO
5211
5211

ATB-06-1S 6.5:1 5310.45 5.5 1020.49 F12/F14 F16 Ø1.97 35969.43 7.48 4.84 4.25 6.81 2.60 2.28 2.09 2.80 Ø0.98 2.20 Ø2.20 7.64 0.31 1.38 3.15 Ø19.69 48.50 2.5“X11TPi BSP
ATB-11-1S 8:1 9735.82 6.8 1522.33 F14/F16 - Ø2.17 44961.79 8.86 5.71 5.47 12.01 2.60 2.28 2.36 3.37 Ø0.98 2.44 Ø2.17 7.64 0.31 1.38 3.15 Ø23.62 68.34 3“X11TPi BSP
ATB-16-1S 12.5:1 14161.19 10.6 1416.12 F16/F20 F25 Ø2.68 65194.59 10.83 6.61 6.54 13.35 2.60 2.28 2.95 4.25 Ø0.98 3.05 Ø2.95 9.49 0.31 1.38 3.54 Ø23.62 112.44 3.5“X11TPi BSP
ATB-23-1S 14:1 22126.86 11.9 1973.72 F20/F25 F30 Ø3.23 78683.13 13.19 6.85 7.60 14.37 2.60 2.28 3.35 4.31 Ø0.98 3.29 Ø2.95 9.49 0.31 1.38 3.54 Ø23.62 149.91 4“X11TPi BSP
ATB-38-1S 16:1 33632.83 13.6 2628.67 F25/F30 F35 Ø3.74 89923.58 14.80 7.95 8.66 15.75 2.60 2.28 4.02 5.33 Ø1.18 3.94 Ø3.54 13.90 0.31 1.38 4.41 Ø23.62 231.49 5“X11TPi BSP
ATB-55-1S 17.5:1 48679.10 14.8 3478.34 F30/F35 F40 Ø4.13 101164.02 17.01 9.25 9.69 16.77 2.76 2.36 4.41 6.04 Ø1.18 4.21 Ø4.17 13.90 0.31 1.38 4.41 Ø29.53 326.28 5“X11TPi BSP
ATB-85-1S 19:1 75231.34 16.2 4947.57 F35/F40 - Ø4.92 119148.74 19.29 10.08 10.51 17.60 2.76 2.36 4.96 6.52 Ø1.18 4.33 Ø4.96 13.90 0.31 1.38 4.41 Ø29.53 451.95 6“X11TPi BSP
ATB-130-1S 27.5:1 115059.69 23.4 5230.79 F35/F40 - Ø5.71 157366.26 23.23 11.30 13.39 21.61 2.76 2.36 5.91 7.32 Ø1.57 5.59 Ø5.91 18.11 0.47 1.38 5.67 Ø29.53 784.84 M218X3P

ATB-180-1S 27.5:1 159313.42 25.2 6319.43 F40 F48 Ø7 224808.94 26.77 12.68 15.35 23.58 2.76 2.36 7.09 7.85 Ø1.57 5.91 Ø7.09 18.11 0.47 1.38 5.67 Ø29.53 952.40 M218X3P
Multi-turn Bevel Gear Operators for Manual Operation and Electrical Actuation

ATB-1SD Series (A-Type, Standard Thrust)

Electrical Actuation Flange Mounting For All Models Sr. No. Description Material US Standard IS Standard
1 Housing Ductile Iron ASTM A536 60-40-18 SGI 400/15
2 Base Plate Ductile Iron ASTM A536 60-40-18 SGI 400/15
3 Bevel Gear Carbon Steel ASTM A322 4140 40CrMo3
Actuator Mounting ISO 5211 Ød 4 Bevel Pinion Carbon Steel ASTM A322 4140 40CrMo3
F10 0.98 5 Thrust Bearing Special Steel Cylindrical Roller Bearing
6 Adaptor Sleeve Ductile Iron ASTM A536 70-50-05 SGI 500/7
F14 1.18 7 Adaptor Bronze B148 C95800 -
F16 1.38 8 Spur Housing Ductile Iron ASTM A536 60-40-18 SGI 400/15
9 Spur Cover Ductile Iron ASTM A536 60-40-18 SGI 400/15
10 Input Pinion Carbon Steel ASTM A322 4140 40CrMo3
11 Spur Gear Carbon Steel ASTM A322 4140 40CrMo3
Flange Drill As Per ISO 5211 Keyway As Per IS 2048 12 Hardware Carbon Steel - 8.8 Gr or Equivalent
13 Stem Protector Carbon Steel ASTM A53 IS 2062 Gr B
14 Handwheel Carbon Steel ASTM A53 IS 2062 Gr B
15 Locknut Carbon Steel ASTM A576 1045 45C8

Optional
Rated Valve
Input Valve Max Stem Max Reco. Approx
Output Mech. MTG
Model Ratio Torque MTG Diameter Thrust A B C D E F G H ØI J ØK Hand- Weight Thread Size
Torque Adv. Flange
(ln-in) Flange (ØD) (kN) wheel (lbs)
(lb-in) ISO 5211
ISO 5211

ATB-06-1SD 12.5:1 5310.45 9.4 566.45 F12/F14 F16 Ø1.97 35969 7.48 4.84 4.25 12.05 2.60 2.28 2.09 2.80 Ø0.98 2.20 Ø2.20 Ø19.69 52.91 2.5”X11TPI BSP
ATB-11-1SD 15.5:1 9735.82 11.6 840.82 F14/F16 - Ø2.17 44962 8.86 5.71 5.47 13.27 2.60 2.28 2.20 3.37 Ø0.98 2.44 Ø2.17 Ø23.62 72.75 3”X11TPI BSP
ATB-16-1SD 27.75:1 14161.19 20.8 681.51 F16/F20 F25 Ø2.68 65195 10.83 6.61 6.54 14.49 2.60 2.28 2.95 4.25 Ø0.98 3.05 Ø2.95 Ø23.62 119.05 3.5“X11TPI BSP
ATB-23-1SD 30.75:1 22126.86 23.1 957.65 F20/F25 F30 Ø3.23 78683 13.19 6.85 7.60 15.55 2.60 2.28 3.35 4.31 Ø0.98 3.29 Ø2.95 Ø23.62 158.73 4“X11TPI BSP
ATB-38-1SD 49.5:1 33632.83 31.1 1079.79 F25/F30 F35 Ø3.74 89924 14.80 7.95 8.66 17.20 2.60 2.28 3.54 5.33 Ø1.18 3.94 Ø3.54 Ø23.62 249.12 5“X11TPI BSP
ATB-55-1SD 54:1 48679.10 40.5 1201.93 F30/F35 F40 Ø4.13 101164 17.01 9.25 9.69 18.23 2.76 2.36 4.57 6.04 Ø1.18 4.21 Ø4.17 Ø29.53 343.92 5“X11TPI BSP
ATB-85-1SD 58.5:1 75231.34 43.8 1717.04 F35/F40 - Ø4.92 119149 19.29 10.08 10.51 19.06 2.76 2.36 4.96 6.52 Ø1.18 4.33 Ø4.96 Ø29.53 471.79 6“X11TPI BSP
ATB-130-1SD 108:1 115059.69 81 1420.54 F35/F40 - Ø5.71 157366 23.23 11.30 13.39 24.09 2.76 2.36 5.91 7.32 Ø1.57 5.59 Ø5.91 Ø29.53 826.73 M218X3P

ATB-180-1SD 124:1 159313.42 93 1712.62 F40 F48 Ø6.69 224809 26.77 12.68 15.35 26.06 2.76 2.36 7.09 7.85 Ø1.57 5.91 Ø7.09 Ø29.53 992.08 M218X3P

World Area Configuration Centers (WACC) offer sales support, service, For complete list of sales and manufacturing sites, please visit
inventory and commissioning to our global customers. www.emerson.com/actuationtechnologieslocations or contact us at [email protected]

19200 Northwest Freeway ©2018 Emerson. All rights reserved.

Houston TX 77065
USA The Emerson logo is a trademark and service mark of Emerson Electric Co. Bettis™ is a mark of one
T +1 281 477 4100 of the Emerson family of companies. All other marks are property of their respective owners.
F +1 281 477 2809

www.emerson.com/bettis