Scribd
Upload
58 views3 pages

Apc SNMP Management Card

Uploaded by

aviation
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
58 views3 pages

Apc SNMP Management Card

Uploaded by

aviation
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

APC Web/SNMP Management Card Page 1 of 3

United States
Products >> Power Management

APC Web/SNMP Management Card


UPS network interface card that
provides standards-based
management of UPSs in racks,
computer rooms, and data
center environments.

APC Web/SNMP Management Card, a web based UPS Management product, provides full management of
UPSs via multiple open standards like Telnet, HTTP, and SNMP. It is a full-featured, robust power
management product that is certified for and tightly integrated with Enterprise Management products.
Through the Web/SNMP Management Card, you can monitor and configure your APC UPSs to shut down
and reboot your computer systems, receive email alerts and view the event log. With a wap enabled mobile
phone you can check the status of most Smart-UPS and Matrix-UPSs.

Evaluate this product at testdrive.apcc.com.

General Information

Current Version
APC Web/SNMP Management Card v3.1.1 10BaseT Ethernet
APC Smart-UPS and Matrix-UPS Application Firmware module v3.1.0
APC Symmetra Power Array Application Firmware module v3.1.0
APC Silcon Series Application Firmware module v3.1.0

APC SNMP Management Card v 3.0.2 Token Ring (no web support).

Hardware Requirements
UPS Model APC Smart-UPS, Matrix-UPS, Symmetra Power Array, and Silcon Series.

Communications Type RS-232 via APC UPSs SmartSlot.

Software Requirements
Client software Standard Web browser like MS IE and Netscape Navigator v4.x (or later) and SNMP based
Management Platforms with APC PowerNet or Telnet console software.

Availability
Standard distribution AP9606, Web/SNMP Management Card for 10 BaseT Ethernet.
AP9603, SNMP Management Card for Token Ring (SNMP, telnet only - no web support).
channels

Features & Benefits

User Interface
APC Web/SNMP Full-featured UPS management via a Web Browser.

http://www.apcc.com/products/management/web_snmp_card.cfm 03-Mai-2001
APC Web/SNMP Management Card Page 2 of 3

Management Card
(10 BaseT Ethernet only)
SNMP-based Comprehensive power management from all major Network Management Systems via PowerNet. See
Management Platform Integration for more information.
Management
Telnet Full-featured UPS management via a Telnet Console.

WAP Check status of most SmartUps or Matrix.

UPS Administration
BOOTP Enabled Card ships BOOTP enabled so that a BOOTP server assigns an IP address, Subnet Mask and Gateway
to the card.

Configuration utility (10 Cards ship with configuration utility that allows the Administrator to save a standard configuration file.
This file can then be downloaded over the network to mass configure hundreds of Web/SNMP Cards.
BaseT Ethernet only)
Security (10 BaseT User name and password in basic mode Enhanced mode employs advanced authentication scheme
using the MD5 Algorithm.
Ethernet only)
Task Scheduling Schedule periodic UPS self-tests.

UPS Operating Full control over UPS transfer settings and sensitivity to power fluctuations.
Parameters
UPS Audible Alarm Configure UPS alarm to beep on power failure, power failure + 30 seconds, at low battery condition, or
never beep.

Diagnostics
Predictive failure The UPS conducts regular internal self-tests. When a potential problem is detected, such as the need
for a replacement battery, a notification is sent to the relevant Administrators and users before the
analysis problem arises. This allows an Administrator to be proactive in maintenance.

UPS Self-test Initiate self test of local or remote UPS to maximize UPS uptime.

UPS Runtime Calibration Initiate runtime calibration of remote UPS to maintain accurate runtime values.

SNMP trap based events Records power events with a description to enable diagnosis of UPS/power problems.
logged in NMS event
console

Event Handling
Email The Web/SNMP Management Card supports Email capability for all UPS application firmware modules
(sumx310.bin, sy310.bin, and dp3e310.bin.) Provides Administrator with event notification to Email
capable devices.

Event Log The Web/SNMP Management Card supports on-board Event Logging capability for all UPS application
firmware modules (sumx310.bin, sy310.bin, and dp3e310.bin.) This allows you to record and view power
and system events without using PowerChute software. The last 300 events will be displayed using
Web, Telnet, and FTP interfaces.

Severity based action Allows an Administrator to configure (based upon severity) which events will send notifications to which
Email/Trap recipients.
configuration
Over 70 SNMP traps For each of the 70+ power and environmental events, the Administrator can configure the Network
Management System (NMS) to e-mail, page, or take other necessary actions.
based events reported

Shutdown/Reboot
Operating System Gracefully shuts down operating system (requires PowerChute plus on server).
Shutdown
Multi-server Shutdown Via network. See PowerChute Network Shutdown for more information.

Administrative Shutdown Immediate, graceful shutdown/restart of servers.

Shutdown Parameters Set and modify the shutdown parameters to best suit the needs of the server being protected. Required
operating system shutdown time.

Power Return Enable automatic server reboot on return of AC Power. Ensure batteries are sufficiently charged before
returning power to the server to guard against successive power outages.

http://www.apcc.com/products/management/web_snmp_card.cfm 03-Mai-2001
APC Web/SNMP Management Card Page 3 of 3

returning power to the server to guard against successive power outages.


Parameters
Turn off UPS Shuts off power to connected equipment. Excellent for situations where construction or maintenance is
scheduled in a facility.

Recommended Applications
Any server or networking equipment protected by APC UPSs, especially mission critical systems.
Datacenter environments benefit greatly with the high level of UPS control.

Copyright © American Power Conversion Corp., all rights reserved

Home | Products | Support | Services | Selectors


Shop APC | Contact | Search | Site Map

Privacy Policy

http://www.apcc.com/products/management/web_snmp_card.cfm 03-Mai-2001

You might also like