Scribd
Upload
14 views1 page

Harmonic Filter

Uploaded by

rpejmanfar90
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
14 views1 page

Harmonic Filter

Uploaded by

rpejmanfar90
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Harmonic Filters 132kW up to 2600kW | DATASHEET

Approvals
EF3H
Passive Harmonic Filter *
up to 2600kW Technical data
Rated power 132-2600 kW
Rated voltage 380-415±10% V
Rated frequency 50 Hz

THDi according to IEEE 519


110% Pn (continuous)
Overload capability
160% Pn 1 min/h (momentary)
Efficiency >99%

Capacitive power <15% Pn (132-2600 kW)


consumption <20% Pn (2,2-110 kW)
40°C – land design
Max ambient
45°C – maritime design
temperature
≥50°C – heavy duty design
Winding material aluminium, copper

Additional equipment NC thermostat

Mounting standing, vertical


Degree of protection IP00
Standards compatibility PN-EN 60076-6
*- UL approved insulation system

Function Benefits and advantages Application


Mitigation of harmonics caused by non-linear ▪ Lower input current RMS ▪ Electric drives
loads is vital procedure if it comes to energy value
▪ 6-pulse rectifiers
cost reduction. ElhandHF™ Harmonic filter
▪ Lower power losses
allows to utilize system power capacity to ▪ Energy chargers
maximum degree, protects against shortened ▪ Increased energy quality
▪ Systems sensitive to
installation life and equipment malfunction. Due
▪ Extended lifetime of energy quality
to compact design, filter can be easily integrated
another devices installed
with existing system and is ready to use right ▪ Light and heavy industry
in the system
after installation. Compensation of harmonics
by filter application helps to comply with IEEE ▪ Very low capacitive input ▪ Marine equipment
519, EN-61000-3 or other energy quality current in no load state ▪ Oil & Gas
standards.

You might also like