Scribd
Upload
25 views4 pages

NVflash

Uploaded by

luisp.delta9
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
25 views4 pages

NVflash

Uploaded by

luisp.delta9
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

How to use NV Flash Utility?

Step 1.
(1) If your mainboard has a BIOS protection jumper, change the setting to allow BIOS flashing.
(2) Make a DOS boot diskette. (See example: Windows 98 O.S.)
Beware: Windows 2000/Me are not allowed to make a DOS boot diskette.
a. With an available floppy disk in the floppy drive. Please leave the diskette "UN-write protected" type. Double
click the "My Computer" icon from Desktop, then click "3.5 diskette (A)" and right click to select "Format (M)".

b. Select the Quick (erase) for Format Type, and pick both "Display summary when finished" and "Copy
system files", after that press "Start". That will format the floppy and transfer the needed system files to it.

c. After the floppy has been formatted completely, please press "Close".
Step 2. Download BIOS and BIOS utility program
(1) Please go to ECS website at http://www.ecs.com.tw and click "Download " section.
(2) Choose an appropriate model name in accordance with user's manual or based on the motherboard
revision that can be found near the AGP slot.

Step 3.
(1) Make sure the system will boot from the floppy disk. After the system boot from floppy disk, type "A:\> dir" and
press "Enter" to check the entire files in floppy A. Then type the "BIOS flash utility" and "BIOS file" after A:\>. In
this case you have to type "A:\>nvflshsc -f 691n1p30.bin " and then press "Enter".

(2) Now screen appears the following Flash Utility screen. Please check whether new BIOS tag is correct. Right
after that, press [Enter] to start BIOS flash procedure or press [Esc] to abort.
Beware: Please do not turn off the system while you are upgrading BIOS. It will render your BIOS corrupted
and system totally inoperative.
(3) When the BIOS flash completed. It will auto restart the system.

Step 4. Load BIOS defaults


(1) Normally the system redetects all devices after BIOS has been upgraded. Therefore, we highly recommend
reloading the BIOS defaults after BIOS has been upgraded. This important step resets everything after the
flash.
(2) The boot up screen will indicate your motherboard model and current BIOS version.

(3) Press [DEL] key to enter BIOS setup when system is boot up. Use the arrows to highlight the item "LOAD
OPTIMAL SETTINGS" then press "Enter". System will ask "Load Optimal Settings (Y/N)?" Press "Y" and
"Enter" keys to confirm.
Then press [F10] key to save & exit setup.
© 2007 Elitegroup Computer Systems. All Rights Reserved

You might also like