Reference Books:

 Foster Provost & Tom Fawcett, “ Data Science for Business”, O’ Reilly, 2013
 James Warren and Nathan Marz, “Big Data: Principles and Best Practices of Scalable
Realtime Data Systems”, Manning Publications, 2015
 Anil Maheshwari, “ Data Analytics”, McGrawHill Publications, 2017

Industrial Project
[As per Choice Based Credit System (CBCS) Scheme)
SEMESTER-IV

Subject Code MCA-451 INTERNAL ASSESSMENT (IA)

30
MARKS
Number of Lecture Hours / Week 12
END TERM EXAM (ETE) MARKS 70

Total Number of Lecture 40

SEMESTER END EXAM HOURS 03
Hours
Credits: 06
The industrial project as part of the curriculum will be held in the institute as one of the laboratories. This may
be in continuationto the project under taken by the student during industrial training and/or of industrial nature
and/or have good industrial significance and/or may be done in collaboration with industry (as per suitability at
the institute level).
The evaluation will be done in the institute by one internal examiner and one external examiner (from outside
the institute) appointed by RTU.
 Guidelines for Submission of Industrial Project

All the candidates of MCA are required to submit a Final Project Report based on the work done by
him/her during the project period.
THE GUIDE
The Guide for MCA would be a person having MCA with 3 years’ experience in academic/Industry.

PROJECT TIME
The MCA Major Projects would be at list 12 Weeks and carries a total of 100 marks. The Project topics
should be based on syllabus or as per the requirement of specific industry in sync with the course. Every
student has to prepare and submit the project work in a group or separately (Max two students).
Plagiarism would not be accepted under any circumstances.
Project Report should compulsorily include the software development/ soft copy should also be submitted
in CD along with Hard Bound Project report.
Project Evaluation Guidelines.
The project is evaluated on the basis of following aspects:
Presentation & Software execution: 40% of total marks.
Project report (documentation): 30% of total marks.
Viva-Voce: 30% of total marks.

SUMMARY/ABSTRACT
All students must submit a summary/abstract separately with the project report. Summary, preferably,
should be of about 3-4 pages. The content should be as brief as is sufficient enough to explain the
objective and implementation of the project that the candidate is going to take up. The write up must
adhere to the guidelines and should include the following :
 Name / Title of the Project and about the Problems
 Why is the particular topic chosen?
 Objective and scope of the Project
 Methodology (including a summary of the project)
 Hardware & Software to be used
 Testing Technologies used
 What contribution would the project make?

TOPIC OF THE PROJECT- This should be explicitly mentioned at the beginning of the Synopsis. This
being the overall impression on the future work, the topic should be able to corroborate the work.
OBJECTIVE AND SCOPE: This should give a clear picture of the project. Objective should be clearly
specified. What the project ends up to and in what way this is going to help the end user has to be
mentioned.
PROCESS DISCRIPTION: The process of the whole software system proposed, to be developed,
should be mentioned in brief. This may be supported by DFDs / Flowcharts to explain the flow of the
information.
RESOURCES AND LIMITATIONS: The requirement of the resources for designing and developing
the proposed system must be given. The resources might be in form of the hardware/software or the data
from the industry. The limitation of the proposed system in respect of a larger and comprehensive system
must be given.
CONCLUSION: The write-up must end with the concluding remarks-briefly describing innovation in the
approach for implementing the Project, main achievements and also any other important feature that
makes the system stand out from the rest.
The following suggested guidelines must be followed in preparing the Final Project Report:
The industrial project as part of the curriculum will be held in the institute as one of the laboratories.
This may be in continuation to the project under taken by the student during industrial training and/or of
industrial nature and/or have good industrial significance and/or may be done in collaboration with
industry (as per suitability at the institute level). The evaluation will be done in the institute by one
internal examiner and one external examiner (from outside the institute) appointed by RTU.
The Project study and development should be on the following lines:

FORMAT OF THE STUDENT PROJECT REPORT ON COMPLETION

1. Cover Page as per specifiedformat
2. Declaration Certificate
3. Acknowledgement
4. Certificate of the Company /Institute
5. Main Report
1. Introducton
1.1 Objectives
1.2 Problem description
1.3 About Organization

2. System Study

2.1 System with limitations

2.2 Significance of the Project
2.3 Beneficiaries of the System
2.4 Feasibility study

3. System Analysis
Requirement Specification
i. Functional Requirement.
ii. Non Functional Requirement.
iii. User Requirement
iv. System Requirement
4. System Design
a) Data Flow Diagram
b) E-R Diagrams
c) Use Case Diagrams
d) Flow Charts
e) Database Tables
f) Input output Forms
5. Development
a) Environment
b) Coding Style
c) Coding Techniques
d) Coding

6. Testing

a. Test cases

7. System Security

b. Checks and Control

c. Encryption, secure

8. Conclusion/Future Enhancement
9. Bibliography

The reports prepared by the students MUST NOT have only definitions of the above
mentioned topics but should explicitly state these in the context of the project undertaken.
They should submit the actual work done in details.

General instructions about preparation of report

Paper: A4
Font: Times New Roman, Bookman Old Style
Chapter Heading: 16pt, Sub heading: 14, Sub-Sub Headings: 12
Bold Running Matter: 12 pt
Paragraph Gap: 6 Pt Maximum
Line Gap: 1.5
Margins: Left 1.5, Right, Top and Bottom 1 inch
All diagrams/figures and tables should be appropriately numbered.

Submission of Project Report to the University:

The student will submit his/her project report in the prescribed format. The Project Report should include:
 Copy of the Summary/Abstract. To be mailed to college/Institute well in advance mentioning the
about future project which would be undertaken.
 Two Hard Bound Copies of the Project Report which is around 80 to 120 pages.
 Soft copy of project on CD/DVD/Pen Drive pasted inside of the back cover of the project report.

Binding & Color code of the report/Thesis

For MCA – IV Semester (Industrial Project work)

Hard Bound Report
Cover/Background of the Page of Project Report – Sky Blue
Letters in Black
 Cover page

An
Industrial Project Report
on
<“Write title of Project>

SubmittedtotheRajasthanTechnicalUniversity,Kotain
Partialfulfillmentoftherequirementforthedegreeof
MASTER OF COMPUTER APPICATIONS

<Logo of your college> <RTUlogo>

Supervisor Submitted By:

<Name> <Name of Candidate >

Designation Enrolment No.: .....

<Nameofyour college>
Affiliatedto
Rajasthan Technical University,
Kota(Rajasthan)-324010

Month and Year

 Candidate’s Declaration

I hereby declare that the work, which is being presented in the MCA-451, Instrial Project , entitled

“...........................(Title)...................................................”in partial fulfilment for the award of Degree of

“Master of Computer Applications” in Deptartment of Computer Applications submitted to the

...........(Name of College).........., Rajasthan Technical University is a record of my own work carried under the

Guidance of Shri/ Dr. ..............................., Deptartment of Computer Applications,...........(Name of

College)........... .

I have not submitted the matter presented in this Project Report any where for the award of any other

Degree.

<Name and Signature of Candidate>

Enrolment No.: ............

........(Name of College)..............,

Name(s) of Supervisor(s)
.....................................
.....................................
 <college Name>
<name of Department >

Certificate

Date:
This is to certify that the Industrial Project (MCA-451) work entitled “name of the project‘’ submitted by
“name of student” (RTU Roll No. …………… )to the Department Of Computer Science and Application
of <college name> has been examined and evaluated.

The Project work has been prepared as per the regulations of Rajasthan Technical University, Kota and
qualifies to be accepted in partial fulfillment of the requirement for the degree of MCA (Master of
Computer Applications).

Signature of the student Supervisor/Guide

(Name with Designation)

External Examiner
(Name with Designation) Head of Institution/Principal
 On Original Company Letter Head

Ref No……………….. Date:

Certificate

This is to certify that your name (RTU Roll No.) is/was undertraining from _______________
(startdate) to ________(enddate)undermysupervisioninpartialfulfillmentof therequirementforthe award
of the Degree of Master of Computer Applications.
Duringthis period he /she has workedon……. (“Project Name”) as
a …..(Role of student).

TrainingIncharge/Project Leader/HR
(Seal/Sign and Name with Designation)