Charging Set

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

Portable Charging Set

0-420 Bar
Datasheets

CONTACT QHP LTD FOR MORE INFORMATION:


T: +44 (0) 1244 393500 | E: [email protected] | W: www.qhp.co.uk
Spares and Accessories
Datasheets
To provide the total package QHP offer an extensive range of accessories including
portable and permanent nitrogen charging equipment, service tool kits, fluid port
adaptors, mounting brackets and clamps to suit all UK and European standard
bladder accumulators.

Nitrogen hoses
UK, European and USA gas bottle adapters
European and USA accumulator gas stem adapters
Service tool kits.
Clamps and brackets designed for specific use on bladder accumulators are
supplied complete with rubber supports to ensure rigid mounting of the
accumulator mass (see mounting elements).

Please contact the QHP sales department for further information.

CHARGING AND TESTING KITS


QHP are able to provide a range of nitrogen charging equipment to charge
accumulators with nitrogen or to check or to change the existing pre-charge pressure
in accumulators.

For this purpose the charging and testing unit is screwed onto the gas valve of the
hydraulic accumulator and connected to a commercial nitrogen bottle via a flexible
charging hose. If the nitrogen pressure is only to be checked or reduced the charging
hose does not need to be connected. The unit has a screw-type fitting with a built in
gauge, check valve and a spindle for opening the accumulator gas valve to control the
pressure.

For further information on this product you can download the Charging Set Datasheet
located at the bottom of this page.

CONTACT QHP LTD FOR MORE INFORMATION:


T: +44 (0) 1244 393500 | E: [email protected] | W: www.qhp.co.uk
Portable Charging Set
0-420 Bar

GENERAL:
The Quality Hydraulic Power (QHP) charging and testing
unit QCS is used for the charging of Accumulators with
Nitrogen gas as well as pressure checking and
adjustment.

Section 4 (Commissioning) and Section 4.1 (Pre-


Charging Procedure) of `Instruction Manual for Bladder
Accumulators` and `Instruction Manual for Piston
Accumulator`. MUST be followed when using the QHP
Portable Charging Set.

TECHNICAL SPECIFICATION:
Suitable for pressures up to 420 Bar
5/8” & 7/8” UNF Gas adaptors available upon request

ASSEMBLY INCLUSIONS:
Charging Body
2.5 metre hose with ¼” BSP female connections
Gauge with a range to suit
Bull nose adapter for connection to gas bottle (5/8”
BSP) Bottle key for Nitrogen bottle

GAUGES:
Dual scale as standard in Bar & PSI
Standard range available as ex-stock

Pressure Gauge Range


Model No.
(Bar)

QCS33-1425/A 0-70

QCS33-1425/B 0-140

QCS33-1425/C 0-210

QCS33-1425/D 0-280

QCS33-1425/E 0-350

QCS33-1425/F 0-420

BESPOKE GUAGES AVAILABLE UPON REQUEST CONTACT QHP LTD FOR MORE INFORMATION:
T: +44 (0) 1244 393500 | E: [email protected] | W: www.qhp.co.uk

You might also like