CONCEPTUAL CAE DESIGN AND

SIMULATION VIRTUAL INTERNSHIP

This process document will guide you in:

• Downloading the app for Lab activities.

• Create yourself an account in the LMS.
• Access the 1st course.
• Access the 2nd course
• Access the 3rd course.
• Access the 4th course.
• Assessment Examination completion
Downloading the app for Lab activities
Step: 1 Click on the link below to fill out the details.

Link: https://web.altair.com/inspire-personal-edition
Step: 2 Fill out all the details and click on submit.

Note – Mention your “college name” in place of company and mention “student” as your
job title.
Step: 3 Click to download the software.
Step: 4 After clicking for the download you will be redirected to the page below. The
download will start automatically and you can check it in your download history.
Step: 5 Click on the icon to start the installation process.
Step 6: After installation click on “ok”.
Step 7: Accept the agreement and click next.
Step: 8 Choose your desired location for installation select “ok” then click on “next”.
Step: 9 Select your relevant request and click on “next”.
Step: 10 Click on install to start and the installation will begin.
Step: 11 Click on the icon below to start the process.
Step: 12 Click on the “Inspire” to start the course.
Step: 13 You will be redirected to the app to do your lab activities.
Create yourself an account in the LMS.
Step: 14 Go to the link below and click on sign up option to get your course access.

Link: https://learn.altair.com/
Step: 15 To create an account fill your email Id.
Step: 16 Choose your account type as “Everyone” and Fill out the details. After accepting
the agreement click “Next”.

Student
Step: 17 After clicking on "Next," you will be prompted to enter the verification code sent
to the email ID you provided earlier.
NOTE: In case of entering an incorrect email ID, click on the highlighted option below
(refer to the image below). This will redirect you to the registration form. Kindly fill out the
form again with the correct email ID.
Verification code you will receive in your mail Id.
Step: 18 After verification you need to fill your “college name” in place of company name
as and click “Next”.
Step: 19 After completing the previous step you will have to wait few seconds. Your
account will be created and you will receive a message shown in pic 2. You can click “here”
to go on the next step.
NOTE: If you receive any Error don’t go back just refresh your page.
Step: 20 Set up your password.
Step: 21 Set up a strong password ensuring all the requirements are matched.
Step: 22 After that it is required to set up a security question.
Step: 23 Click on continue to go for the next step.
Access the 1st course
Step: 24 After Log In and choose eLearning.
Step: 25 Cancel eLearning.
Step: 26 Search “Inspire Introduction Recorded Class”.
Step: 27 Start from “Inspire Introduction” and complete the course one by one.

You can as well access the 1st lesson through the link mentioned below.
https://learn.altair.com/course/view.php?id=198&section=1
2nd Lesson Link.
https://learn.altair.com/course/view.php?id=198&section=2
3rd Lesson Link.
https://learn.altair.com/course/view.php?id=198&section=3
4th Lesson Link.
https://learn.altair.com/course/view.php?id=198&section=4
5th Lesson Link.
https://learn.altair.com/course/view.php?id=198&section=5
6th Lesson Link.
https://learn.altair.com/course/view.php?id=198&section=6
7th Lesson Link.
https://learn.altair.com/course/view.php?id=198&section=7
8th Lesson Link.
https://learn.altair.com/course/view.php?id=198&section=8
9th Lesson Link.
https://learn.altair.com/course/view.php?id=198&section=9
10th Lesson Link.
https://learn.altair.com/course/view.php?id=198&section=10
After completing all the lesson you are eligible to download your course completion
certificate.
NOTE: DONOT Skip any video or else you won’t be able to download the certificate.
After completing all the Modules you will receive your “Inspire Introduction Recorded
Class” certificate.

NAME
Access the 2nd course
Step: 28 Search “Inspire Introduction Recorded Class”.
Step: 29 Start from “Interface Tour” and complete the course one by one.

You can as well access the 1st lesson through the link mentioned below.
https://learn.altair.com/course/view.php?id=167&section=1
2nd Lesson Link.
https://learn.altair.com/course/view.php?id=167&section=2
3rd Lesson Link.
https://learn.altair.com/course/view.php?id=167&section=3
4th Lesson Link.
https://learn.altair.com/course/view.php?id=167&section=4
5th Lesson Link.
https://learn.altair.com/course/view.php?id=167&section=5
After completing all the lesson you are eligible to download your course completion
certificate.
NOTE: DONOT Skip any video or else you won’t be able to download the certificate.
After completing all the Modules you will receive your “Inspire Motion” certificate.

NAME
Access the 3rd course
Step: 30 Search “Inspire Structures”.
Step: 31 Start from “Inspire Interface” and complete the course one by one.

You can as well access the 1st lesson through the link mentioned below.
https://learn.altair.com/course/view.php?id=163&section=1
2nd Lesson Link.
https://learn.altair.com/course/view.php?id=163&section=2
3rd Lesson Link.
https://learn.altair.com/course/view.php?id=163&section=3
4th Lesson Link.
https://learn.altair.com/course/view.php?id=163&section=4
5th Lesson Link.
https://learn.altair.com/course/view.php?id=163&section=5
6th Lesson Link.
https://learn.altair.com/course/view.php?id=163&section=6
7th Lesson Link.
https://learn.altair.com/course/view.php?id=163&section=7
After completing all the lesson you are eligible to download your course completion
certificate.
NOTE: DONOT Skip any video or else you won’t be able to download the certificate.
After completing all the Modules you will receive your “Inspire Structures” certificate.

NAME
Access the 4th course
Step: 32 Search “Inspire for Additive Manufacturing”.
Step: 33 Start from “Inspire Interface” and complete the course one by one.

You can as well access the 1st lesson through the link mentioned below.
https://learn.altair.com/course/view.php?id=412&section=1
2nd Lesson Link.
https://learn.altair.com/course/view.php?id=412&section=2
After completing all the lesson you are eligible to download your course completion
certificate.
NOTE: DONOT Skip any video or else you won’t be able to download the certificate.
After completing all the Modules you will receive you “Inspire for Additive
Manufacturing” certificate.

NAME
Assessment Examination completion
Step: 34 Search “Inspire Structures Professional Certification”.
Step: 35 You start the practise assessment through the mentioned below link
https://learn.altair.com/course/view.php?id=469&section=2
You can access the assessment examination through the mentioned below link
https://learn.altair.com/course/view.php?id=469&section=3
Step: 36 You will have to complete two examinations.
In the 1st examination you need to score more than 70% and in the 2nd examination you
need to score a 100% to receive the certificate.
You are allowed unlimited attempts for the examination.
After completing the examination you can download your certificate.
After completing the examination you will receive your “Inspire Structures Professional”
Certificate .

NAME
For any type of query feel free to reach out to us:

• Email ID: [email protected]

• Contact No. : 8093254914