Scribd
Upload
27 views20 pages

How To Setup HPE Server From Scratch For Secure64 x86 Cache

Uploaded by

Joe Quek
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
27 views20 pages

How To Setup HPE Server From Scratch For Secure64 x86 Cache

Uploaded by

Joe Quek
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 20

How to setup HPE server from scratch for secure64 x86 cache?

Summary of main points:

 Configure iLO so that you can connect to the server console from your laptop
 Setup RAID 1 for the SSD
 Load machine with default settings
 Disable hyper-threading
 Change BIOS to legacy BIOS mode
 Register iLO so that you can use the remote console and media option
 Use remote console and media option to point to iso file on your laptop
 Install s64 x86 cache software from iso image located on your laptop

The screenshots attached is trying to show the above mentioned can be done in a step by step
manner.
1) Boot up server with monitor and key board connected

2) Press F9 to setup system utilities

3) Enter System configuration


4) Enter iLO5 configuration utility

5) Network options
6) Disable DHCP and set your desire IP

F10 save and go back to previous menu (Esc) and reboot.


Try to go back to user management menu after boot up.

7) Go to User Management
8) Edit or Remove User

9) Change the iLO login name and password to your desire

Save and exit


10) Set the laptop IP

11) Reboot machine to get new iLO IP

12) When machine is booting, press F9 to setup system utilities


13) System configuration
14) Select RAID config

15) Configure RAID array


16) Create RAID array

17) Select both SSD as RAID members

Proceed to next Form


18) Select RAID 1

19) Change the logical name to your preference and SSD Over Provisioning Optimization to
“Enable”
Submit changes and save
20) Go back to main menu

21) Go to BIOS settings


22) Press F7 to load default settings. Press enter and wait. Machine reboot.

23) When system rebooting, press F9.


Go back to System utilities menu, BIOs and Select processor options
24) Disable hyper-threading

25) Go to boot options


26) Change to Legacy BIOS mode

27) Select ok and reboot


28) Connect your laptop to iLO port and use browser to go to iLO ip.
Login

e.g. http://192.168.0.1

29) Go to administration
30) Go to licensing

31) Enter your license key and activate it


32) Go to remote console and media option. Click on Applet

33) click on Web start and keep file


34) Open file with java web start launcher

35) Allow the web app to launch

Continue
36) Choose virtual drives -> Image file CD/DVD-ROM

37) Select your iso file

Press open
38) Power down machine
(Purpose is to boot the machine from “CD-ROM”)

39) Power on machine again.


When machine restart, it will boot from CD-ROM option first.
You will see the screen below.
Choose Cache 3.0.1 and just press enter.
Installing…….

40) Done

You will be able to see the login prompt.

You might also like