Scribd
Upload
1K views1 page

Work Instruction For Tool Room

Uploaded by

krishnan selvan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
1K views1 page

Work Instruction For Tool Room

Uploaded by

krishnan selvan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

UNITY FORGE PRIVATE LIMITED

D-10 ,MARAIMALAI NAGAR, 603209

ISSUE NO:03 DATE:22.09.2020

WORK INSTRUCTION FOR TOOL ROOM


INSPECTION QA/WI/03
Purpose : This work instruction covers the quality activities of Dies/Tools inspection in
tool room.

Scope: This deals with procedure adopted for die/ tool inspection both for newly
made dies and partly used dies.

Authority & Responsibility : Head QA is having overall responsibility. Inspector Tool


room QA die inspection is responsible for carrying out inspection on day to day basis.

Procedure:
a) For New Dies:
1) Receive Dies/Tools and plaster samples - From Tool room
2) Check drawing - For Validity
3) Inspect - As per drawing parameters with calibrated instruments
4) Verify Traceability - As recorded by drawing and as per lab intimation.
5) Record - Actual inspected dimensions
6) Intimate Tool room - For correcting the variations
7) Re-inspect - After Correction by Tool room.
8) Get approval - From Head QA for releasing
9) Intimate Tool room - About acceptance with report .
b) For Old Dies :
1) Receive dies /Plaster Samples – From Tool room with feed back repot
2) Study feed back report - Recommendation for corrections to be
inspected as drawing.
3) Check and verify - For correction carried out by tool room.
4) Record - Actual findings
5) Intimate tool room - For any more corrections if required.
6) Re-inspect - To verify the corrections are carried out.
7) Get approval - From Head QA.
8) Intimate Tool room - About the acceptance with report

Page 1 of 1

Prepared by Approved by Rev : 00

_________________________________________________________________________________________________________

You might also like