GC Accessories

Zephyr™ 500HR

DIGITAL GAS FLOW METER

• Accurate - NIST Traceable calibration with up to
0.01 mL/min resolution
• Precise - Unaffected by temperature or pressure
• Versatile - Measure Air, Nitrogen, Oxygen, Hydrogen, Versatile Fittings & Flow Adaptors
Helium, and 5 % Argon/Methane up to 500 mL/min and The flow meter includes interchangeable fittings and 1/32” and 1/8”
Carbon Dioxide up to 300 mL/min ID tubing. Use the smaller tubing for low-flow measurements.
The larger tubing minimizes backpressure for high-flow
Reliable, Accurate Flow measurements.
Measurement Flow adaptors make convenient, leak-free connections to all of
your flow sources. The unit includes General Purpose and Agilent
The Phenomenex Zephyr 500HR Digital Gas Flow Meter is an
™
split vent adaptors. The General Purpose adaptor connects to
excellent choice for all your flow applications. The unit provides
Agilent FID, split vent traps, packed GC columns, and gas lines.
reliable accurate real-time measurements for all your gas streams.
The Agilent split vent adaptor connects to Agilent GC split vents.
With seven gas NIST-traceable calibrations, 2 % of reading
The unit also includes a capillary column adaptor.
accuracy, and a measuring range from 0.01-500 mL/min, one
flow meter replaces several separate flow meters for GC, SFC,
SFE, industrial hygiene, biotechnology and general laboratory NIST Traceable Calibration
applications.
The Zephyr 500HR Digital Gas Flow Meter is calibrated with seven
The flow meter works equally well with positive and negative gases using NIST traceable standards. An economical recalibration
(vacuum) flow sources and may be placed in-line for continuous service maintains the unit’s performance, and includes minor
flow measurement. Use it to monitor flow to traps, sorbent tubes, repairs and an NIST-traceable calibration certificate. The certificate
incubators, fermentors, or reaction vessels without interrupting includes percent error data indicating how far your meter was out
gas flow. of calibration, helping you meet ISO, GLP, GMP and other quality
system requirements. The unit is CE approved.
Compared to most other general-purpose flow meters, the Zephyr
offers a wider flow range and higher resolution (0.01 mL/min), and
with the accuracy and precision you need at low flowrates. Don’t
waste money purchasing any other flow meter. The unit’s auto- Specifications
ranging display shows two decimal places (0.01 mL/min resolution) Flow Range: 0.01-500 SCCM Air, N2, H2, O2, He & 5 % Ar/CH4 Auto-ranging
for reading less than 10 mL/min. It is good for setting capillary GC 0.01 - 300 SCCM CO2
flow or for leak testing. Its high sensitivity easily detects even the Accuracy: 0.01 - 9.99 SCCM: 0.01 SCCM or +/-2 % of reading
smallest of leaks. 10.0 - 500 SCCM: 0.1 SCCM or +/-2 % of reading
Sensor Type: Solid-state mass flow, silicon on ceramic
Calibration: Multi-point, NIST Traceable, all gases, Certificate supplied
Rugged and Reproducible Modes:
with % Error Data
Standard flow range: mass flow, linear velocity & split ratio
Low flow range: mass flow & split ratios
The rugged solid-state sensor with microprocessor controller Display: 16-Character Alpha-Numeric LCD, Auto-ranging
Digital Gas Flow Meter

measures true mass flow without the ambient temperature Power: 9-Volt (alkaline) automatic power off 5 minutes after last
and pressure change errors that affect soap film and acoustic key stroke, low battery warning
Dimensions: 190.5 x 57.4 x 101.6 mm (7.5" x 2.26" x 4.0")
sensor meters. There’s also no water-vapor error (up to 5 %) that Safety: CE mark certification to EN55011, EN5502 & EN50082-1
plagues soap film techniques. You’ll obtain precise, accurate Warranty: 1 year parts & labor. Does not cover recalibration of unit.
flow measurement with no liquids, no bubbles, no waiting and Note: SCCM = Standard Cubic Centimeters per Minute
no hassles!
ORDERING INFORMATION
Unlike competitive flowmeters, the Zephyr 500HR Digital Gas Flow Digital Gas Flow Meter
Meter tolerates water vapor, making it suitable for purge and trap
Part No. Description Unit Price
applications. If the sensor is exposed to an exceedingly moist I I I
EG0-7332 Zephyr 500HR Digital Gas Flow Meter, 0.01-500 mL/min, ea
ACCESSORIES

sample, simply purge the sensor with dry gas for several minutes
HPLC & GC

to restore performance. 9V battery power

Replacement Accessories
Each unit’s straight-through gas flow path reduces backpressure, A AG0-7344 1/16" (1.6 mm) Barbed Inlet/Outlet Fitting 2/pk
B AG0-7345 1/8" (3.8 mm) Barbed Inlet/Outlet Fitting 2/pk
internal volume, and sensor purge time. Readings stabilize quickly
E AG0-7346 Split Vent Adaptor ea
and measurements at low flow rate are accurate and precise. F AG0-7347 General Purpose Flow Adaptor ea
G AG0-7348 Capillary Column Adaptor ea
H AG0-7349 1/32" (0.8 mm) ID Connecting Tubing, 10 ft. ea
I AG0-7350 1/8" (3.8 mm) ID Connecting Tubing, 1 meter ea
AG0-7351 Replacement Septa for Capillary Column Flow Adaptor 25/pk
(1/4" Cylindrical septa)
Note: Zephyr 500HR Digital Gas Flow Meter includes Recalibration Service
A, B, E, F, G, H & I AG0-7352 Recalibration Service for the Zephyr 500HR ea

338 Phenomenex