My-Com precision switches My-Com precision switches

My-Com A My-Com B / My-Com BS My-Com C My-Com F My-Com E

activating 30 gram force (cN) My-Com A30/80 My-Com B30/80 My-Com C30/80 My-Com F30/80
force 50 gram force (cN) My-Com A50/80 My-Com B50/80 My-Com C50/80 My-Com F50/80
75 gram force (cN) My-Com A75/80 My-Com B75/80 My-Com C75/80 My-Com F75/80 My-Com E75/80
100 gram force (cN) My-Com A100/80 My-Com B100/80 My-Com C100/80 My-Com F100/80 My-Com E100/80
electrical max. AC voltage 24 VAC 24 VAC 24 VAC 24 VAC 24 VAC
data max. switch. current AC 50 mA 50 mA 50 mA 50 mA 50 mA
max. DC voltage 15 VDC 15 VDC 15 VDC 15 VDC 15 VDC
max. switch. current DC 2 mA 2 mA 2 mA 2 mA 2 mA
activating NPN 75 gram force (cN)
force PNP 75 gram force (cN)
electrical max. supply voltage
data max. load current at 24 VDC
min. load resistance
output
actuator tip zirconium oxide ZrO2 zirconium oxide ZrO2 zirconium oxide ZrO2 zirconium oxide ZrO2 hardened steel
housing brass nickel plated brass nickel plated brass nickel plated brass nickel plated brass nickel plated
special protection class IP 50 protection class IP 50 protection class IP 50 protection class IP 50 protection class IP 50
features

connection diagram / output function

+~ +~ +~ +~ +~
-~ -~ -~ -~ -~

normally closed (NC) / break function normally closed (NC) / break function normally closed (NC) / break function normally closed (NC) / break function normally closed (NC) / break function

options for connector base version, remove .../80 for connector base version remove .../80 for connector base version, remove .../80 for connector base version, remove .../80
and add .../S35 and add S to the part number. and add .../S35 and add .../S35
* length with connector base S35 For example: * length with connector base S35 * length with connector base S35
approximately 30 mm My-Com B30/80 (cable version) approximately 30 mm approximately 38 mm
My-Com BS30 (connector version)

overrun 1,5 mm approx. overrun 1,5 mm approx. overrun 1,5 mm approx. overrun 1,5 mm approx. overrun 0,8 - 1,2 mm approx.

ø1
ø5 M 8 x 0,5 M 8 x 0,5 1,5 M 8 x 0,5 M 6 x 0,5

12 4
*

21,5
ø1 ø 2,5
2,5
1,5

ø1 ø1 ø1

1,5
1,5

1,5
1,5
SW 10

SW 10

SW 8
SW 10
SW 10

*
10
21,5

21,5

15
*
18

29,5
18

31,5
10

12

37,2
9
2

4
M 8 x 0,5 ø 7,4
ø 10
4
8

ø8

4 2. 02 Baumer electric Baumer electric 2. 03 4

Technical specifications

Mechanical data
Technical Repeatability ± 0,001 mm (1 micron)
characteristics Reset (Hysteresis) ≤ 0,002 mm
Mechanical lifetime 10'000'000 switchings
Switching frequency 0 - 10 Hz
Max. activating velocity < 30 mm/s
Temperature range -20 °C to + 75 °C (-5 °F to + 165 °F)
Standard cable length 80 cm
Standard conductor cross section 0,14 mm2
Standard cable material PVC
Protection class (standard) IP 50

Transistor output
The My-Com types L, G and M are available with a transistorized output. When
supplied with this configuration the output circuit is supplied normally open (NO).
A protective diode is incorporated into the circuit to protect against transients.

LED indicator
The My-Com types with transistor output are available with LED output
indicators.

Increased environmental protection (IP 67)

For applications in harsh environments (dust, oil, cooling fluid) we recommend
the waterproof My-Com D, H or M. The My-Com type L, with transistor output,
is also available with the same protection (IP 67). The sealing membrane for all
of these is made of Viton.

Maximum installation torque

If the published installation torque specifiations prove to be insufficient for your
application, we recommend using a nut locking liquid to secure the My-Com.
The published specifications for maximum torque must not be exceeded!

Wire color code Max. torque figures

BN = Brown My-Com D 20 Nm
BK = Black My-Com E 5,5 Nm
BU = Blue All others 3,5 Nm

Example My-Com F 50 / 80
Part number key My-Com L 75 N 80 /L

Type
Activating force in gram force (cN)
Transistor output
N = NPN or P = PNP
Cable length in cm
LED

Baumer electric 1. 03 4