Tamilnadu State Wide Single Window Portal

AUTOMATED BUILDING PERMIT APPROVAL SYSTEM

PLAN DOCUMENT SCRUTINY REPORT

STATUS : Verified
APPLICATION DETAILS

1 APPLICANT NAME c 2 APPLICATION DATE 12/07/2024

3 APPLICATION NUMBER 696518-2024-IF 4 APPLICATION TYPE Permit

5 OCCUPANCY TYPE Residential 6 DCR NUMBER DCR72024JXJSG

REGISTERED
7 ARCHITECT/ENGINEER - 8 DEVELOPMENT TYPE New Construction

PLOT DETAILS

1 SURVEY NO 126/11A1B

2 PLOT NO 38 AND 39 3 PATTA NO NIL

4 TALUK Madurai East 5 DISTRICT Madurai

PLOT AREA (As per PLOT AREA (As per
6 declaration) in m² 337.96 7 measurement) in m² 337.96
AVERAGE WIDTH OF PLOT AVERAGE DEPTH OF PLOT
8 in m 17.02 9 in m 18.29
SURRENDER ROAD WIDTH
10 ROAD WIDTH in m 6.10 11 AREA in m² 0.00

AREA TYPE
(Continuous/Economically
12 Weaker Section/Others) OTHERS 13 DEMOLITION AREA in m² 0

OSR SURRENDER/
14 OSR APPLICABLE NO 15 BUYBACK/ RETAIN

Overall Summary

Total Area
Built Up Area in m² Carpet Area in m² Covered Area in m² FSI Area in m² Non FSI Area in m²
188.44 122.19 0.00 188.44 0.00

Plot Area Details

Description Area in m²
As At Site 337.96
FMB or PLR 337.96
As Per Document 337.96

Block Wise Summary

Application No:696518-2024-IF, Scrutiny Date:12/07/2024 02:29 PM

1 of 5
Block No 1 - Proposed Details
Deduction Area in Non FSI Area in
Floor Occupancy/Sub Occupancy Floor Area in m²
m²
FSI Area in m²
m²
Carpet Area in m²

0 Individual residence 139.28 0 139.28 0 100.06

1 Individual residence 49.16 0 49.16 0 22.13
Total 188.44 0.00 188.44 0.00 122.19

1. Covered Area is 0.00 m²

2. Height of building is 6.79 m
3. Head Room Area (Non FSI Area) is 0 m²
4. Total Non FSI Area is 0.00 m²

Common - Scrutiny Details

1.No. of Blocks
Description Provided Status
Total Number Of Blocks 1 Verified

2.FSI
As per TNCDBR Occupancy Area Type Road Width Required Provided Status
Part VI Pt.35 / pt.36/ Residential OTHERS 6.10 <= 2 0.558 Verified
pt.37/ pt.38/ pt.39

3.Floor Units
Block Floor Unit Number Unit Area
Block 1 Floor 0 1 118.19 Sq.m
Block 1 Floor 1 1 27.21 Sq.m

4.Parking
As per TNCDBR Description Required Provided Status
Annexure iv - part I-13,17,b,part Parking Slots Area 5 M x 2.5 M Minimum Area of No violation of area in 2 parking Verified
II-A,C Each parking
Annexure iv - part I-13,17,b,part Two wheeler parking dimension 1 M x 1.8 M Out of 1 parking 0 parking Verified
II-A,C violated dimension.
Annexure iv - part I-13,17,b,part Car Parking 1 2 Verified
II-A,C
Annexure iv - part I-13,17,b,part Two Wheeler Parking 0 1 Verified
II-A,C

5.Parapet
As per TNCDBR Description Required Provided Status
Part VII , 52(13) Parapet Height >= 1.2 and height <= 1.5 Height >= 1.2 and height <= 1.2 Verified

6.Solar
As per TNCDBR Description Required Provided Status
Part VI 44(2) Solar Assisted Water Heating / Defined in the plan. Verified
Lighting system

7.No. of Dwelling units

Description Provided Status

Application No:696518-2024-IF, Scrutiny Date:12/07/2024 02:29 PM

2 of 5
 Description Provided Status
Total Dwelling units 1 Verified

8.Height of Building
As per TNCDBR Description Required Provided Status
Part VI Pt.35 / pt.36/ pt.37/ pt.38/ Height of Building for Block 1 14m / G+2 or Stilt +3 / up to 16 6.79m / 2 Floors / 1 Dwelling Verified
pt.39 Dwelling Units units

9.Collection and disposal of Solid and Liquid Waste

As per TNCDBR Description Field Verified Status
part vi-pt 35-17 Collection and disposal of solid and liquid Defined in the Plan. Verified
Waste

10.Rain Water Harvesting

As per TNCDBR Description Provided Status
Annexure XXII-A Rain Water Harvesting Defined in the plan Verified

11.North Direction
As per TNCDBR Description Provided Status
part ii - 8 -iii-(l) North Direction North directions provided Verified

12.Location Plan
As per TNCDBR Description Provided Status
part ii - 8 -i Location Plan Location plans provided Verified

13.Road Width
As per TNCDBR Description Occupancy Required Provided Status
Part VI Road Width Individual residence >=3m 6.10m Verified

14.Gate
As per TNCDBR Description Required Provided Status
Annexure iv-part II-D MAIN_GATE Length x Width x Width of main gate should be 20.05 x 30.08 x 20.05 Verified
Height minimum 3m
Annexure iv-part II-D WICKET_GATE Length x Width x 20.05 x 10.03 x 20.05 Verified
Height

Block 1 - Scrutiny Details

1.Setback
As per TNCDBR Setback Occupancy Level Field Verified Required Provided Status
Part VI, Pt.35 / Front Individual 0 Minimum distance 1.5 3.00 Verified
pt.36/ pt.37/ pt.38/ residence
pt.39

Part VI, Pt.35 / Rear Individual 0 Minimum distance 0 3.20 Verified

pt.36/ pt.37/ pt.38/ residence
pt.39

Part VI, Pt.35 / Side Setback 1 Individual 0 Minimum distance 1 3.65 Verified
pt.36/ pt.37/ pt.38/ residence
pt.39

Part VI, Pt.35 / Side Setback 2 Individual 0 Minimum distance 1 3.0 Verified
pt.36/ pt.37/ pt.38/ residence
pt.39

Application No:696518-2024-IF, Scrutiny Date:12/07/2024 02:29 PM

3 of 5
2.General Stair - Mid landing
As per TNCDBR Floor Description Required Provided Status
Part VII , 52(17) floor 0 Minimum width for general 0.75 0.92 Verified
stair 1 mid landing

Part VII , 52(17) floor 1 Minimum width for general 0.75 0.92 Verified
stair 1 mid landing

3.General Stair - Number of risers

As per TNCDBR Floor Description Required Provided Status
Part VII , 52(17) floor 0 Maximum no of risers 15 10 Verified
required per flight for
general stair 1 flight 1

Part VII , 52(17) floor 0 Maximum no of risers 15 10 Verified

required per flight for
general stair 1 flight 2

Part VII , 52(17) floor 1 Maximum no of risers 15 10 Verified

required per flight for
general stair 1 flight 1

Part VII , 52(17) floor 1 Maximum no of risers 15 10 Verified

required per flight for
general stair 1 flight 2

4.General Stair - Tread width

As per TNCDBR Floor Description Required Provided Status
Part VII , 52(17) floor 0 Minimum tread for general 0.25 0.30 Verified
stair 1 flight 1

Part VII , 52(17) floor 0 Minimum tread for general 0.25 0.30 Verified
stair 1 flight 2

Part VII , 52(17) floor 1 Minimum tread for general 0.25 0.30 Verified
stair 1 flight 1

Part VII , 52(17) floor 1 Minimum tread for general 0.25 0.30 Verified
stair 1 flight 2

5.General Stair - Width

As per TNCDBR Floor Description Required Provided Status
Part VII , 52(17) floor 0 Minimum width for general 0.75 0.96 Verified
stair 1 flight 1

Part VII , 52(17) floor 0 Minimum width for general 0.75 0.96 Verified
stair 1 flight 2

Part VII , 52(17) floor 1 Minimum width for general 0.75 0.96 Verified
stair 1 flight 1

Part VII , 52(17) floor 1 Minimum width for general 0.75 0.96 Verified
stair 1 flight 2

6.Kitchen
As per TNCDBR Description Floor Required Provided Status
part vii-pt52-6 Minimum height of kitchen floor 0 2.75m 3.05m Verified

Application No:696518-2024-IF, Scrutiny Date:12/07/2024 02:29 PM

4 of 5
 As per TNCDBR Description Floor Required Provided Status
part vii-pt52-6 Total area of kitchen floor 0 5.00Sq.m 15.19Sq.m Verified
part vii-pt52-6 Minimum Width of kitchen floor 0 1.80m 3.05m Verified

7.Kitchen Ventilation
As per TNCDBR Description Required Provided Status
part vii-52(16a) Light and Ventilation Minimum 1/8th of the floor area Ventilation area 4.68 of Kitchen Verified
Area 15.19 at floor 0

8.Plinth
As per TNCDBR Description Required Provided Status
part vii-pt52-1 Minimum plinth height >= 0.45m 0.45m Verified

9.Room
As per TNCDBR Description Floor Required Provided Status
part vii-pt52-5,6,9,10 Minimum height of room floor 0 2.75m 3.05m Verified

part vii-pt52-5,6,9,10 Minimum height of room floor 1 2.75m 3.05m Verified

Minimum Width of room floor 1 2.4m 3.34m Verified

11.Ventilation
As per TNCDBR Description Required Provided Status
part vii-52(16a) Light and Ventilation Minimum 1/8th of the floor area Ventilation area 14.49 of Room Verified
Area 69.70 at floor 0

part vii-52(16a) Light and Ventilation Minimum 1/8th of the floor area Ventilation area 3.26 of Room Verified
Area 18.80 at floor 1

This report is generated based on the Applicant Declaration and a provided drawing. The drawing has been verified with TNCDBR
rules and final decision on approval will be taken by Department officials. Completion Certificate will not be issued if any deviation
from the submitted drawing more than tolerance Limits.

Application No:696518-2024-IF, Scrutiny Date:12/07/2024 02:29 PM

5 of 5