WAVECOM® W-CODE

W-CODE provides all functions required to classify,

analyze, record, decode and process radio data commu-
nications throughout the entire radio spectrum from
ELF to SHF. W-CODE is the new standard decoder soft-
ware for all Wavecom products.
2
W-CODE
Signal Analysis and Processing

W-CODE Features and Facts

 W-CODE provides powerful signal analysis,

signal processing and decoding
 Automatic classification, code check, de-
modulation and decoding to content level
(text, live voice and image etc.) of signals
 Signal overview using real-time FFT spec-
trum, waterfall displays and manual signal
measurements
 Automatic code check of known signals and
unknown, pre-defined signals
 Supports more than 226 HF, VHF, UHF and
satellite decoder modes and protocols
without additional, costly licensing
 Supports worldwide remote monitoring of
radio transmissions in any frequency band,
anywhere via Internet, Ethernet-LAN, Wire-
less-LAN or Leased Lines
 Supports W-CLOUD high-quality I/Q data
streams from a remote receiver
 Supports SDR (Software Defined Radio) I/Q
data or external digital input
 Supports TCP/IP input streams using IP-
CONF, GEW PXGF, ANSI/VITA-49, Virtual Au-
dio Cable (VAC), WiNRADiO digital Virtual
Sound Card (VSC) and host native sound
card input with sampling rates of up to 192
kHz
 Supports W-PCIe and W-PCI dual and
W74PC quad internal digital down convert-
ers (DDCs) up to 87.5 MHz
 Tested with a number of SDRs, e.g. WiNRA-
DiO G39DDC, G33DDC, GEW GRXLAN, Per-
seus, RFSpace products, Rohde & Schwarz
and MEDAV LR2
Worldwide monitoring with W-CODE and
 Supports direct input and output of WAV
W-CLOUD
files from integrated, digital Wavecom Me-
dia Player/Recorder.
 Decoded output can be saved to files or
transferred to an external application using
the XML based Remote Control Interface
 Multi-mode feature supporting up to eight
concurrent W-CODE instances

3
W-CODE
Signal Analysis and Processing

Signal Sources and Devices

The W-CODE Device Selector supports a

great number of input interfaces and devic-
es, e.g. IF I/Q streams produced by many re-
ceivers, Virtual Audio Cables (VAC), TCP/IP
interfaces, W-CLOUD I/Q streams and the
DDC signals of W-PCIe, W-PCI and W74PC.
The number of supported interfaces is con-
tinuously growing. Using W-CODE prevents
the locking to proprietary devices of soft-
ware producers.
Today there is a demand for wideband stor-
age which is met by directly connecting SDRs
to low-cost hard disks. WiNRADiO G33DDC
and G39DDC will for instance store band-
widths up to 4 MHz. W-CODE offers storage
of narrow bandwidth I/Q streams up to 96
kHz using its native Media Player/Recorder.
Expensive external and exotic recording de-
vices belong to the past.
Quick and easy signal source settings

Example setup for remote signal acquisition using W-CLOUD and W-CODE

4
W-CODE
Signal Analysis and Processing

Signal Sources and Devices

In this setup W-CODE and W-PCIe-LAN works to- this software only solution. The W-PCIe-LAN may
gether with a Software Defined Receiver (SDR) even be replaced by a standard PC or work-
via its direct IF I/Q interface. It is also possible to station. Because data is digitally processed, any
use a universal Virtual Audio Cable (VAC) as in- loss of decoding quality can be avoided.
terface. Additional hardware is not required for

Satellite communication decoding is also possi- acts as a dual Direct Down Converter (DDC). The
ble using W-CODE and W-PCIe, W-PCI or receiving frequency is automatically and directly
W74PC. In this configuration the interface card controlled by W-CODE.

5
W-CODE
Signal Analysis and Processing

W-CODE and W-PCIe, W-PCI or W74PC sup- 70 MHz IF. It is also possible to use a sound
ports all types of receivers with IFs from 8 kHz card as an input device.
to 21.4 MHz and even wideband receivers with

Wideband and Narrowband Recording

Example setup including a WiNRADiO

G39DDC SDR for wideband recording of
up to 4 MHz on a 3-4 TB hard disk via a
standard USB 2.0 interface. Any off-the-
shelf hard disk will do whether it is in-
ternal or connected via USB, LAN or W-
LAN.

The W-CODE Media Player/Recorder rec-

ords and saves signals from the selected
input to digital I/Q WAV files. During
playback of WAV files the signal is sent
unprocessed to W-CODE and an audio
signal is available for simultaneous mon-
itoring. The Media Player/Recorder com-
plements the rich analysis functions
available in W-CODE.

6
W-CODE
Signal Analysis and Processing

Automatic Spectrum Analysis, Classification and Decoding

Powerful analysis and classification unit

Automatic spectrum analysis and signal classifi- detection confidence (in percent).
cation process is winning more and more im- Each signal can further contain a number of sub
portance nowadays. It can conduct spectrum -signals with their parameters again.
monitoring both in wide range (bandwidth) and
round the hour with great preciseness and W-SA is integrated in FFT and FFT / Sonagram
efficiency. This space and time advantage out- displays for all radio bands (HF, V/UHF, SAT etc).
performs clearly a human operator, although Detected signals are marked with their sub-
the later has certain skill and experience. signals and parameters.
Results of all detected signals and their sub-
W-CODE signal classification tools include: signals are delivered on the remote control
 W-Spectrum Analysis (SA) interface (XML RCI) as well for third-party de-
 W-Classifier-NB (Narrowband) velopment.
 W-Classifier-WB (Wideband) Detected signals can be saved with their time-
stamp as a structured XML file for database
W-Spectrum Analysis (SA) can detect and meas- compatible display and analysis.
ure all signals in a selected bandwidth with
measuring parameters such as center (Hz),
signal bandwidth (Hz), signal level (dB) and

W-Spectrum Analysis detects 5 signals

in an HF band (96 kHz bandwidth)

W-Spectrum Analysis detects one STANAG-4285 sig-

nal with its sub-signals, display bandwidth 4 kHz

7
W-CODE
Signal Analysis and Processing

Automatic Spectrum Analysis, Classification and Decoding

Powerful analysis and classification unit

W-Classifier measures a signal in its parame- are processed

ters:
 Modulation type Additional functions for wideband classification
(W-Classifier-WB)
 Baud rate or symbol rate
 Signal center frequency  Bandwidth up to 96 kHz
 Number of carriers  Voice detection AM, FM, USB and LSB
 Frequency shift  Baud rates up to 60 kBd
 Carrier spacing or distance
 CW-Morse detection
 8 kHz bandwidth (W-Classifier-NB,
WCL61PC)
 All signals within the classifier bandwidth

Wideband-Classifier display containing 24 identified signals

8
W-CODE
Signal Analysis and Processing

Automatic Spectrum Analysis, Classification and Decoding

Powerful analysis and classification unit

The Classifier also offers a

number of signal visualising
functions like symbol display,
display of real and imaginary
components of the analyzed
signals, baud rate spectrum
and differential symbol dis-
play in a phase plane. Signal
parameters can also be
measured manually.

Classifier with 2,400 Baud 8-PSK STANAG-4285 HF signal

Analysis of an 8,000 Baud GMSK TETRAPOL signal

The monitored frequency band is dis-

played in a spectrum plane. After clas-
sification has completed, the classi-
fied signals are listed below the spec-
trum display.

9
W-CODE
Signal Analysis and Processing

Automatic Spectrum Analysis, Classification and Decoding

Powerful analysis and classification unit

The Classifier-Code-Check CCC is a versa-

tile analysis tool for the classification of
known and unknown signals and the de-
termination of the mode in use. The CCC
will attempt to process all signals within
the bandwidth of the classifier. The classi-
fier attempts to classify the input signals
according to their modulation formats.
The table check works through the sig-
nals against the entries of the selected
mode list. The code check will attempt to
synchronize against classified modes, fi-
nally the signal will be forwarded to a de-
coder for output.

A CCC Table Editor allows extending,

modifying or deleting records in the da-
tabase used for mode look-up. An input
template containing all important pa-
rameters is available for each modula-
tion type. All parameters, the record
name and the file name are user se-
lectable.

The Signal Parameters Editor allows the

entry of an unlimited number of trans-
mission modes, protocols in an XML ta-
bles. Any table can be loaded from the
Code-Check-Settings menu. Tables are
composed according to their frequency
range (HF, VHF/UHF DIR, VHF/UHF SUB or
satellite).

10
W-CODE
Signal Analysis and Processing

Decoders and Demodulators

The implementation of complex

systems for monitoring is only
limited by the number of decod-
ers and the performance of the
hardware and software. A wide
range of system default settings
can be configured, e.g., input sig-
nal level, measuring interval,
center frequency and demodula-
tor type. W-CODE contains more
than 230 transmission modes, all
available in a standard package,
not requiring any additional li-
cense.

Decoded GW-OFDM from HF

Decoded STANAG-4285 from HF

TETRA decoded from UHF

Decoded satellite SAT-C-TDM transmission

Live examples of decoding are available as flash movies at

http://www.wavecom.ch/product-presentation.php

11
W-CODE
Signal Analysis and Processing

Measurement and Analysis

The determination of signal charac-

teristics is assisted by a large number
of analysis and measurement func-
tions. The numerous integrated anal-
ysis tools contain several different
methods and visualization options
for HF, VHF, UHF, SHF and satellite
emissions. The GUI assists the opera-
tor in analyzing the important signal
parameters. Dynamic zoom functions
allow magnification of details in any
selected window and the scroll buff-
ering feature makes it possible to
move backward and forward in time Sonagram and FFT spectrum display
over the input signal.

FFT
Sonagram
FFT & Sonagram
Waterfall
Oscilloscope

FSK Analysis
FSK Code Check

PSK Symbol Rate

PSK Phase Plane
PSK Code Check
MIL-STANAG Code Check MFSK analysis with tone measurement, graphical
display and FFT
MFSK Analysis
MFSK Code Check

Classifier
Classifier Code Check

Autocorrelation
Bit Correlation
Bit Length Analyis

Demodulated Bit Stream

Some analysis tools

Signal correlating at 9600 bits

12
W-CODE
Signal Analysis and Processing

Simultaneous Processing of Multiple Signals

W-CODE allows up to eight simultaneous in- An advantageous “Workstation License” with a

stances and inputs on the same host PC or work- proper number of licenses can be configured on
station. The instances are completely independ- one single license carrier (USB dongle). This can
ent. DDC or SDR may provide the input signal, be plugged in a PC, all W-CODE instances in a
additional hardware is not required. W-CODE same network can capture licenses from the li-
license is measured on its decoding capacity. cense carrier in a first come-first serve fashion.
Each instance occupies a license when running.

Simultaneous operation with W-

CLOUD of two W-CODE instances
from an Internet I/Q stream.

Simultaneous decoding and symbol

rate analysis using two W-CODE in-
stances. This setup can be further ex-
panded as required. W-PCI and W-PCIe
also allow two inputs with complete
DDC functionality. Software Defined
Radio SDR multi-input is available since
Software V9.0.00.

13
W-CODE
Signal Analysis and Processing

HF - Protocols

ALE-400 EFR POL-ARQ

ALF-RDS FEC-A PRESS-FAX
ALIS FELDHELL PSK-10
ALIS-2 FM-HELL PSK-125 (BPSK, QPSK) with FLARC
ARQ6-90 FT8 PSK-125F
ARQ6-98 GMDSS/DSC-HF PSK-220F
ARQ-E G-TOR PSK-250 (BPSK, QPSK) with FLARC
ARQ-E3 GW-FSK PSK-31 (BPSK, QPSK)
ARQ-M2-242 GW-OFDM PSK-31-FEC
ARQ-M2-342 GW-PSK PSK-63 (BPSK, QPSK) with FLARC
ARQ-M4-242 HC-ARQ PSK-63F
ARQ-M4-342 HF-ACARS (HF-DL) PSK-AM
ARQ-N HNG-FEC ROBUST-PACKET
ASCII ICAO-SELCAL (ANNEX 10) RUM-FEC
AUM-13 LINK-11 (CLEW) SI-ARQ
AUTOSPEC MD-674 SI-AUTO
BAUDOT MFSK-16 SI-FEC
BR-6028 (ITA-2 and ITA-5) MFSK-20 SITOR-ARQ
BULG-ASCII MFSK-8 SITOR-AUTO
CHN 4+4 MIL-188-110-16TONE SITOR-FEC
(-110A/B App. A)
CHU SP-14
MIL-188-110-39TONE
CIS-11 (-110A/B App. B) SPREAD-11, 21, 51
CIS-12 (HEX output) MIL-188-110A SSTV Automatic
Serial Tones, 75-4800 bps
CIS-14 SSTV Martin 1, 2, 3, 4
MIL-188-110A-MOD
CIS-36 SSTV Robot 8s, 12s, 24s, 36s
MIL-188-110B (App. C)
CIS-36-50 STANAG 4539 SSTV SC-1 16, 32s
CIS-50-50 MIL-188-110B SSTV SC-1 8s, 16s, 32s
CLOVER-2 (ARQ, all CRCs) 3200-12800 bps SSTV Scottie 1, 2, 3, 4
CLOVER-2000 (ARQ, all CRCs) MIL-188-141A (ALE) SSTV Wraase SC-1 24s - 96s
CLOVER-2500 MIL-188-141B SSTV Wraase SC-2 20s - 180s
(BW0, BW1, BW4 data)
CODAN-CHIRP STANAG 4285 75-3600 bps
MIL-188-141B
CODAN-SELCAL (BW2, BW3 ID) STANAG 4415 75 bps
MIL-M-55529 NB/WB (NATO ROBUST)
CODAN-3212
OLIVIA STANAG 4481-FSK (KG-84)
CODAN-9001
PACKET-300/600 STANAG 4481-PSK
COQUELET-8
PACTOR (all CRCs) STANAG 4529 75-1800 bps
COQUELET-13
PACTOR-FEC (all CRCs) STANAG 4539 3200-12800 bps
COQUELET-80
PACTOR-II (all CRCs) STANAG 5065-FSK
CV-786
PACTOR-II-AUTO (all CRCs) SWED-ARQ
CW-MORSE
PACTOR-II-FEC (all CRCs) THROB
DCS SELCAL
PACTOR-III (all CRCs) THROBX
DGPS
PACTOR-4 TWINPLEX
DUP-ARQ
PICCOLO-MK12 VISEL
DUP-ARQ-2
PICCOLO-MK6 WEATHER-FAX
DUP-FEC-2

14
W-CODE
Signal Analysis and Processing

VHF/UHF - Protocols

ACARS EEA (Selcal analog) PACKET-9600

AIS EIA (Selcal analog) PCCIR (Selcal analog)
APCO-25 (P25, with live voice) ERMES PDZVEI (Selcal analog)
ASCII EURO (Selcal analog) POCSAG
ATIS (Selcal digital) FLEX PZVEI (Selcal analog)
BIIS FMS-BOS (Selcal digital) SKYPER (POCSAG)
CCIR-1 (Selcal analog) GMDSS/DSC-VHF TETRA (with live voice)
CCIR-2 (Selcal analog) GOLAY/GSC TETRAPOL (with live voice)
CCIR-7 (Selcal analog) MOBITEX-1200 (with OVLS) VDEW (Selcal analog)
CCITT (Selcal analog) MOBITEX-8000 VDL-M2
CTCSS MODAT (Selcal analog) X.25
DCS-SELCAL MPT-1327 (with ITA-5) ZVEI-1 (Selcal analog)
DGPS NATEL (Selcal analog) ZVEI-2 (Selcal analog)
DMR with decryption (basic, ARC- NMT-450 ZVEI-3 (Selcal analog)
4 and AES modes *) and live voice
NWR-SAME ZVEI-VDEW (Selcal digital)
dPMR (with live voice)
NXDN with decryption (basic, DES
DTMF (Selcal analog) and AES) and live voice *) with license of Motorola Solu-
DZVEI (Selcal analog) PACKET-1200 tions®

SATELLITE - Protocols

AMSAT-P3-D INMARSAT-B-TEL (forward, with INMARSAT-M-TEL (forward, with

live voice) live voice)
INMARSAT-AERO-P (L-band)
INMARSAT-B-TELEX-MM (forward) INMARSAT-mM-DATA (forward)
INMARSAT-AERO-C (L-band)
INMARSAT-B-TELEX-SM (forward) INMARSAT-mM-FAX (forward)
INMARSAT-AERO-R (C-band)
INMARSAT-C-EGC (Enhanced INMARSAT-mM-TEL (forward)
INMARSAT-AERO-T (C-band) Group Call)
INMARSAT-B-C-TFC (return) INMARSAT-mM-HSD (High Speed
INMARSAT-C-TDM Data)
INMARSAT-B-Data (forward) INMARSAT-C-TDM-EGC INMARSAT-mM-C-HSD (C band
INMARSAT-B-FAX (forward) High Speed Data)
INMARSAT-C-TDMA
INMARSAT-B-HSD (forward, high INMARSAT-M-DATA (forward) NOAA-GEO SAT
speed data) ORBCOMM
INMARSAT-M-FAX (forward)

FAX-G3 and MODEM - Protocols

FAX-G3 T4 / T6 / JPEG / JBIG T.30 BELL103 V.26 / V.26bis

protocol with ECMM
BELL212A V.32 / V.32bis
FAX-G3-V.17
V.21 V.34 / V.34bis
FAX-G3-V.27ter
V.22 / V.22bis V.90
FAX-G3-V.29
V.23 V.92
FAX-G3-V.34hdx

15
W-CODE
Signal Analysis and Processing

Alphabets

Chinese (7-bit ASCII) ITA-2 Swedish Morse Arabic

HEX ITA-2 TASS Cyrillic Morse Cyrillic
ITA-1 Latin ITA-2 Third Shift Cyrillic Morse Greek
ITA-2 Baghdad70 Arabic ITA-2 Third Shift Greek Morse Hebrew
ITA-2 Baghdad80 Arabic ITA-5 Bulgarian Morse Latin
ITA-2 Cyrillic ITA-5 Danish-Norwegian Morse Scandinavian
ITA-2 Danish-Norwegian ITA-5 French Morse Spanish
ITA-2 Hebrew ITA-5 German User defined 5-bit alphabets
based on UNICODE
ITA-2 Latin ITA-5 Swedish
ITA-2 Latin Transparent ITA-5 US

Demodulators

AM for METEOSAT and NOAA-GEOSAT FAX transmissions FFSK, 10-12000 Baud, Shift 50 Hz-16 kHz
BPSK, 10-12000 symbols/s FSK, 10-2400 Baud, Shift 50 Hz-3.5 kHz
Center frequency 0.5 kHz-3.5 kHz
CTCSS
GFSK, 10-12000 Baud, Shift 50 Hz-16 kHz
CW Morse, 10-500 WPM, Center frequency 0.5 kHz-3.5
kHz, Bandwidth 100 Hz-1.2 kHz, AFC On/Off Mark-Space FSK, 10-300 Baud, Shift 50 Hz-3.5 kHz
Center frequency 0.5 kHz-3.5 kHz
DPSK, DBPSK, DQPSK, D8PSK, D16PSK, 10-12000 symbols/s
MFSK, Tone length 4-1000 ms, max. 64 Tones
DTMF
Shift 50 Hz-3.5 kHz
DXPSK, dual carrier adaptive modulation, 2DPSK-D16PSK,
OFDM, 12-32 carriers, DQPSK, 62.5 symbols/s
100 Baud
OQPSK, 10-12000 symbols/s
FAX-G3-V.17, FAX-G3-V.27ter, FAX-G3-V.29
FAX-G3-V.34hdx QPSK, 10-12000 symbols/s

BELL103, BELL212A, V.21, V.22/V22bis, V.23 Software AM demodulator for VHF/UHF SUB IF inputs
V.26/V26bis, V.32/V.32bis, V.34, V.90, V.92
Software FM demodulator for VHF/UHF SUB IF inputs

Classifier Code Check (CCC) with look-up table and XML-editor for all modulation variants

Process Steps P1 Only classification is performed, but no decoding

P2 Classification and table check are performed, but no decoding
P3 Classification, table check and code check are performed, but no decoding
P4 Classification and table check are performed and finally the signal is decoded if a mode
with an associated, valid detector was found
P5 Classification, table check and code check are performed and finally the signal is decoded
if a mode with an associated, valid detector was found

16
W-CODE
Signal Analysis and Processing

Analysis Functions

Autocorrelation up to 200.000 bits MFSK analysis graphical display of MFSK tone spectrum
with histogram
Automatic analysis and decoding software for all data and
FAX-G3 modulation types Phase plane analysis HF BPSK, QPSK, OQPSK, DPSK and
I/Q 10-2400 Baud
Automatic CRC recognition of all PACTOR-II and PACTOR-II
-FEC systems Phase plane analysis VHF/UHF-DIR BPSK, DPSK, QPSK and
OQPSK 100-12000 Baud
Automatic message type detection (ITA-2, ITA-5 and sync/
async), LSB/MSB for STANAG and MIL-STD modes Phase plane analysis VHF/UHF-SUB BPSK, QPSK, OQPSK,
DPSK and I/Q 50-4000 Baud
Bit correlation analysis. Raw FSK analysis - graphical dis-
play of demodulated data on a raster time line. For visual Real-time FFT, averaging: 1-64 values, bandwidth 0.5, 1, 2,
recognition of character and block lengths 4, 24, 48 kHz and 96 kHz and adjustable cursors, 20
frames/sec
Bit length analysis. Graphical display of demodulated da-
ta, with automatic calculation of bit length and bit pattern Sonagram and FFT tuning display
display
Sonagram, real-time display with cursor functions and
Code check for PSK, FSK, MFSK and MIL-STANAG modes history (full scrolling)
Manual measurement of the frequency shift(s) with mov- Sound card calibration tool
able cursors
Graphical data display for selcal signal analysis
Oscilloscope, real time, resolution up to 200 us/div Waterfall, real-time display with cursor functions

Overall Software Characteristics

Media Player/Recorder, recording and playback of signals Live voice to output decoded / decrypted voice to the
speaker in real-time
ALARM MONITOR, automatically detected text-string sav-
ing to HD or network SMS output SERIAL LINK, serial data output to PC serial interface COM
1 - 16
Automatic insertion of time stamps (in 1 ms)
STANAG5066 parser in MIL-STD and STANAG codes
Synchronized PSK and FSK raw bitstream available through
remote control interface TCP/IP direct data (IQ and PCM) interface for streaming
and for digital receivers (PXGF, IP-CONF, VITA-49)
File formats TXT, JPG, BMP, Unicode, WAVECOM (with
timestamps) TCP/IP remote control with Wavecom GUI, full functionali-
ty over LAN or Internet (encrypted and speed optimized)
PSK, FSK and MFSK baudrate history display with full
graphical recall, averaging and cursor functions Unlimited scroll-back buffers for text and graphics

FSK shift history display with graphical recall, averaging Up to 8 decoders may be installed on one host PC
and cursor functions
WiNRadio VSC and Virtual Audio Cable (VAC) support
Configurable message type for most MIL-STD and STANAG
Sound card input, 8-bit and 16-bit, 8 kHz to 192 kHz, ste-
codes
reo and mono left/right
Pass-band filters in most modes
License on a USB dongle or SD card
Pass-band tuning in FFT display in most modes
WAV files playback and decoding, loop mode
End-to-end decryption option to get clear voice and text
XML Remote Control Interface API for C++ and C#, XML
output
over TCP/IP

17
18
19
W-CODE
Signal Analysis and Processing

Since more than thirty years Wavecom Elektronik of the data communication may be arbitrary, but
AG has developed, manufactured and distributed commonly contains text, images and voice. The
high quality devices and software for the decoding company is internationally established within this
and retrieval of information from wireless data industry and maintains a longstanding, world-wide
communication in all frequency bands. The nature network of distributors and business partners.

Product Information

Products http://www.wavecom.ch/product-summary.php
Datasheets http://www.wavecom.ch/brochures.php
Specifications http://www.wavecom.ch/product-specifications.php
Documentation http://www.wavecom.ch/manuals.php
Online help http://www.wavecom.ch/content/ext/DecoderOnlineHelp/default.htm
Software warranty One year free releases and bug fixes, update by DVD
Hardware warranty Two years hardware warranty
Prices http://www.wavecom.ch/contact-us.php

System Requirements and Ordering Information

Minimum Recommended
CPU P4 Dual-Core 2.4 GHz Core i5 or Core i7 2.8 GHz
Memory 2 GB RAM 4 - 8 GB RAM
OS Windows XP Windows 7 32-bit or Windows 7 64-bit

Product Code Description

WCODE Standard decoder software for all products. Client and server (floating) license
WLV Vocoder live voice output to the speaker. Option for W-CODE, W74PC, W-PCIe, W-PCI and W-SPECTRA
End-to-end decryption option to get clear voice and text. For W-CODE, W74PC, W-PCIe, W-PCI and W-
WCPT
SPECTRA

Distributors and Regional Contacts

You will find a list of distributors and regional contacts at http://www.wavecom.ch/distributors.php

WAVECOM ELEKTRONIK AG
8090 Zurich, Switzerland
E-Mail: [email protected]
Internet: www.wavecom.ch

© WAVECOM ELEKTRONIK AG - Brochure 2023 - All rights reserved

Microsoft, Encarta, MSN and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. ICOM® logo is a registered trade-
mark of Icom Incorporated (Japan) in Japan. Winradio® is a registered trademark of Radixon Group Pty. Ltd. and Rosetta Laboratories Pty Ltd. INMARSAT® is a trademark of the International
Mobile Satellite Organisation. Orbcomm® is a registered trademark by Orbcomm Llc, ORBCOMM Global, L.P. MOBITEX® is a registered trademark by Mobitex Technology AB, Sweden. PACTOR®
is a registered trademark of SCS, Hanau, Germany. TETRA (Trans-European Trunked Radio Architecture) is a registered trademark of ETSI (European Telecommunication Standards Institute).
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the iconic M are registered trademarks of Motorola Trademark Holdings, LLC.

20