GeM Bidding 6677564
GeM Bidding 6677564
GeM Bidding 6677564
GEM/2024/B/5193966
Dated/ दनांक : 23-07-2024
Total Quantity/कुल मा ा 2
1/5
EMD Detail/ईएमड ववरण
Required/आव यकता No
Required/आव यकता No
Splitting/ वभाजन
1. Purchase preference will be given to MSEs having valid Udyam Registration and whose credentials are
validated online through Udyam Registration portal as defined in Public Procurement Policy for Micro and Small
Enterprises (MSEs) Order, 2012 dated 23.03.2012 issued by Ministry of Micro, Small and Medium Enterprises and
its subsequent Orders/Notifications issued by concerned Ministry. If the bidder wants to avail themselves of the
Purchase preference, the bidder must be the manufacturer / OEM of the offered product on GeM. Traders are
excluded from the purview of Public Procurement Policy for Micro and Small Enterprises and hence resellers
offering products manufactured by some other OEM are not eligible for any purchase preference. In respect of bid
for Services, the bidder must be the Service provider of the offered Service. Relevant documentary evidence in
this regard shall be uploaded along with the bid in respect of the offered product or service and Buyer will decide
eligibility for purchase preference based on documentary evidence submitted, while evaluating the bid. If L-1 is
not an MSE and MSE Seller (s) has / have quoted price within L-1+ 15% (Selected by Buyer) of margin of
purchase preference /price band defined in relevant policy, such MSE Seller shall be given opportunity to match
L-1 price and contract will be awarded for 25% (selected by Buyer) percentage of total quantity. The buyers are
advised to refer the OM No. F.1/4/2021-PPD dated 18.05.2023 OM_No.1_4_2021_PPD_dated_18.05.2023 for
compliance of Concurrent application of Public Procurement Policy for Micro and Small Enterprises Order, 2012
and Public Procurement (Preference to Make in India) Order, 2017. Benefits of MSE will be allowed only if seller is
validated on-line in GeM profile as well as validated and approved by Buyer after evaluation of documents
submitted.
2. Estimated Bid Value indicated above is being declared solely for the purpose of guidance on EMD amount and
for determining the Eligibility Criteria related to Turn Over, Past Performance and Project / Past Experience etc.
This has no relevance or bearing on the price to be quoted by the bidders and is also not going to have any
impact on bid participation. Also this is not going to be used as a criteria in determining reasonableness of
quoted prices which would be determined by the buyer based on its own assessment of reasonableness and
based on competitive prices received in Bid / RA process.
2/5
* As per GeM Category Specification/जेम केटे गर विश के अनुसार
No. Of Poles 4
Additional Specification Parameters - MCCB With Thermal Magnetic / Microprocessor Based Trip Unit
( 2 pieces )
Specification Parameter
Bid Requirement (Allowed Values)
Name
(1) The bidder shall submit complete technical details of the item offered
Documents to be submitted along with the offer. (2) Necessary test report proving conformance to the
standard specified shall be submitted along with the supply.
Moulded Case Circuit Breaker (MCCB), 630A, 4 Pole, 415V AC, 50HZ, IP40,
Item description Vertical mounting, Rotary operating mechanism (Direct/Extended), Electrical
operating mechanism, Mechanical interlocking kit & Spreader terminals.
Consignee
S.No./ . Reporting/Officer/ Delivery Days/ डलीवर के
परे षती/ रपो टग Address/पता Quantity/मा ा
सं. दन
अिधकार
3/5
Consignee
S.No./ . Reporting/Officer/ Delivery Days/ डलीवर के
परे षती/ रपो टग Address/पता Quantity/मा ा
सं. दन
अिधकार
600038,INTEGRAL COACH
1 Vijayaditya Jaiswal FACTORY MINISTRY OF 2 30
RAILWAYS CHENNAI - 38
Buyer Added Bid Specific Terms and Conditions/ े ता ारा जोड़ गई बड क वशेष शत
1. Generic
OPTION CLAUSE: The Purchaser reserves the right to increase or decrease the quantity to be ordered up
to 25 percent of bid quantity at the time of placement of contract. The purchaser also reserves the right to
increase the ordered quantity by up to 25% of the contracted quantity during the currency of the
contract at the contracted rates. Bidders are bound to accept the orders accordingly.
2. Scope of Supply
Scope of supply (Bid price to include all cost components) : Only supply of Goods
3. Certificates
Bidder's offer is liable to be rejected if they don't upload any of the certificates / documents sought in the
Bid document, ATC and Corrigendum if any.
4. Certificates
Material Test Certificate Should Be Sent Along with The Supply. The Material Will Be Checked by Buyer’s
Lab & the Results of the Lab will be the Sole Criteria for Acceptance of the Item.
5. Certificates
To be eligible for award of contract, Bidder / OEM must possess following Certificates / Test Reports on the
date of bid opening (to be uploaded with bid):
Complete technical details of the item offered along with the offer.
.
Disclaimer/अ वीकरण
The additional terms and conditions have been incorporated by the Buyer after approval of the Competent
Authority in Buyer Organization, whereby Buyer organization is solely responsible for the impact of these clauses
on the bidding process, its outcome, and consequences thereof including any eccentricity / restriction arising in
the bidding process due to these ATCs and due to modification of technical specifications and / or terms and
conditions governing the bid. If any clause(s) is / are incorporated by the Buyer regarding following, the bid and
resultant contracts shall be treated as null and void and such bids may be cancelled by GeM at any stage of
bidding process without any notice:-
1. Definition of Class I and Class II suppliers in the bid not in line with the extant Order / Office Memorandum
issued by DPIIT in this regard.
2. Seeking EMD submission from bidder(s), including via Additional Terms & Conditions, in contravention to
exemption provided to such sellers under GeM GTC.
3. Publishing Custom / BOQ bids for items for which regular GeM categories are available without any
Category item bunched with it.
4/5
4. Creating BoQ bid for single item.
5. Mentioning specific Brand or Make or Model or Manufacturer or Dealer name.
6. Mandating submission of documents in physical form as a pre-requisite to qualify bidders.
7. Floating / creation of work contracts as Custom Bids in Services.
8. Seeking sample with bid or approval of samples during bid evaluation process. (However, in bids for
attached categories, trials are allowed as per approved procurement policy of the buyer nodal Ministries)
9. Mandating foreign / international certifications even in case of existence of Indian Standards without
specifying equivalent Indian Certification / standards.
10. Seeking experience from specific organization / department / institute only or from foreign / export
experience.
11. Creating bid for items from irrelevant categories.
12. Incorporating any clause against the MSME policy and Preference to Make in India Policy.
13. Reference of conditions published on any external site or reference to external documents/clauses.
14. Asking for any Tender fee / Bid Participation fee / Auction fee in case of Bids / Forward Auction, as the
case may be.
Further, if any seller has any objection/grievance against these additional clauses or otherwise on any aspect of
this bid, they can raise their representation against the same by using the Representation window provided in
the bid details field in Seller dashboard after logging in as a seller within 4 days of bid publication on GeM. Buyer
is duty bound to reply to all such representations and would not be allowed to open bids if he fails to reply to
such representations.
This Bid is also governed by the General Terms and Conditions/ यह बड सामा य शत के अंतगत भी शािसत है
In terms of GeM GTC clause 26 regarding Restrictions on procurement from a bidder of a country which shares a land border with India, any bidder from a country which
shares a land border with India will be eligible to bid in this tender only if the bidder is registered with the Competent Authority. While participating in bid, Bidder has to
undertake compliance of this and any false declaration and non-compliance of this would be a ground for immediate termination of the contract and further legal action
in accordance with the laws./ जेम क सामा य शत के खंड 26 के संदभ म भारत के साथ भूिम सीमा साझा करने वाले दे श के बडर से खर द
पर ितबंध के संबंध म भारत के साथ भूिम सीमा साझा करने वाले दे श का कोई भी बडर इस िन वदा म बड दे ने के िलए तभी पा होगा
जब वह बड दे ने वाला स म ािधकार के पास पंजीकृ त हो। बड म भाग लेते समय बडर को इसका अनुपालन करना होगा और कोई भी
गलत घोषणा कए जाने व इसका अनुपालन न करने पर अनुबंध को त काल समा करने और कानून के अनुसार आगे क कानूनी कारवाई
का आधार होगा।
5/5