Scribd Logo
Upload

Welcome to Scribd!

  • 11 views

    1.0 MM MTC

    Uploaded by

    Puneet Sharma

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    1.0 MM MTC

    Uploaded by

    Puneet Sharma
    11 views1 page

    Original Title

    1.0 mm mtc

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    11 views1 page

    1.0 MM MTC

    Uploaded by

    Puneet Sharma

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    MILL TEST CERTIFICATE Jindal Stainless Limited.

    (INSPECTION CERTIFICATE) IS 6911

    In Accordance with EN 10204 :2004 Type 3.1

    CM/L 9100015395
    a4c927jnhMDE4NTI1MDQ=
    CUSTOMER Rekha Stainless
    :AADINATH TRADERS CERTIFICATE NO. :JSL-CRD/QA/2024-25/DOM/01852504
    CITY FARIDABAD
    :GHAZIABAD DATE :26.05.2024
    P.O.NO. :1381635_PPP/24feb-31march/sspo 001 PO DATE:24.02.2024 VEHICLE NO. :HR55AF0188
    CUSTOMER SPECIFICATION :As per OA/PO agreement SALES ORDER NO. :0558106502
    SHIPMENT/DELIVERY NO. :6400065926 / 2101240533 NET WT(MT) :7.596

    Material Description/Product Grade / Type Material Specifications Process-Route


    STAINLESS STEEL 304/1.4301 ASME SA 240/SA 240M SEC.II PART A-23, ASTM EF-AOD-LRF-CCS
    A240/A240M-23,EN 10088-2:14/10028-7:16,IS 6911:2017 AMD
    NO.3

    PHYSICAL DESCRIPTION
    SR BATCH NO. HRC/PLATE PKT/PALLET WEIGHT NO. OF HEAT NO. THK WIDTH LENGTH FINISH EDGE QUALITY
    NO. NO. NO. (MT) PCS (mm) (mm) (mm)
    1 H1B0679528 415199 2.530 99 2404J5309 1.000 1,250.00 2,500.00 N4P Mill Edge PRIME
    2 H1B0679529 415199 2.532 99 2404J5309 1.000 1,250.00 2,500.00 N4P Mill Edge PRIME
    3 H1B0679530 415199 2.534 99 2404J5309 1.000 1,250.00 2,500.00 N4P Mill Edge PRIME

    CHEMICAL ANALYSIS (LADLE)


    HEAT NO. %C %Mn %S %P %Si %Ni %Cr %N %Mo %Cu %Ti %Nb %Al
    2404J5309 0.052 1.83 0.005 0.038 0.40 8.03 18.26 0.054 - - - - -

    MECHANICAL PROPERTIES:SAMPLE DIRECTION - TRANSVERSE


    Sr Rp 0.2/ Rp 1.0 Rm/ %EL %EL %EL Hardness Bend Test
    No. YS Mpa TS GL= 50 GL= 80 GL= 5.65 SO HRBW
    Mpa Mpa mm mm mm

    1 303 335 638 59 - - 83 / 82 -

    2 303 335 638 59 - - 83 / 82 -

    3 303 335 638 59 - - 83 / 82 -

    ADDITIONAL INFORMATION
    1)MATERIAL SOLUTION ANNEALED AT TEMPERATURE 1040°C MINIMUM AND QUENCHED IN AIR-WATER MIST AT A SUFFICIENT RATE TO PREVENT RE-PRECIPITATION OF CARBIDES
    2) THE ABOVE MATERIAL FULLY CONFORMS TO IS 6911:2017 AMD NO.3 CHEMICAL & MECHANICAL PROPERTIES OF PRODUCT AS TESTED IN ACCORDANCE WITH THE SCHEME
    OF TESTING & INSPECTION CONTAINED IN BIS CERTIFICATION.
    3) ABOVE MATERIAL ALSO FULFIL THE REQUIREMENTS OF ASTM A480/A480M/ASME SA 480/SA480M
    4) MATERIAL GRADE AS PER IS 6911 :2017 AMD NO.3: 304

    A) FINISHES: HOT ROLLED N1, 1D( "N1" STANDS FOR NO.1) . COLD ROLLED 2D, 2B, BA, N4, BX, HC, LN, MMT, MR, SCB, SL, SR ("N4" STANDS FOR NO.4,
    "BX" STANDS FOR BOX FINISH, "HC" STANDS FOR HONEY COMB, "LN" STANDS FOR LINEN, "MMT" STANDS FOR MACROMAT, "MR" STANDS FOR MOON ROCK,
    "SCB" STANDS FOR SCOTCH BRITE, "SL" STANDS FOR SLIP FREE, "SR" STANDS FOR STRIPE ) "P" STANDS FOR WITH TOP PVC , "H" STANDS FOR WITH BOTH SIDE PVC ,
    B) PLATE: MATERIAL 5 MM AND OVER IN THICKNESS AND OVER 250 MM IN WIDTH (AS PER ASTM/ASME STANDARD) & THICKNESS 3 MM OR OVER (AS PER DIN STANDARD)
    C) SHEET: MATERIAL UNDER 5 MM IN THICKNESS AND 600 MM AND OVER IN WIDTH (AS PER ASTM/ASME STANDARD) & THICKNESS LESS THAN 3 MM (AS PER DIN STANDARD)
    D) COIL:IN "PHYSICAL DESCRIPTION" LENGTH MENTIONED AS "COIL". E) NO WELD REPAIR HAS BEEN DONE ON ANY PRODUCT. F) DIMENSION TOLERANCE AS PER SO/OA

    Jindal Stainless Limited, This is hereby certified that the material was manufactured, sampled, tested & inspected in ISO 9001- 2015
    Cold Rolling Division, accordance with requirements of the material specification, SO/PO and has been found to meet ISO 14001-2015
    O.P. Jindal Marg, HISAR-125005.INDIA, these requirements. The material supplied under this Test Certificate is free from any ISO 45001:2018
    TEL :+91-1662 -222471-83, radioactive contamination as checked by procedures established by Jindal Stainless Limited as ISO 50001:2018
    FAX :+91-1662 -220496, 220476 per the recommendations provided by AERB. CERTIFIED COMPANY
    Email: [email protected]
    Format ref. : QAD-CR/09/F REV.15 Eff.Date 02/03/2023

    Any unauthorised usage of this Test Certificate will warrant Legal Action.
    1/1

    You might also like