Scribd
Upload
27 views2 pages

Message Passing Interface Support For Parallel Computing 192

Uploaded by

NH Kim
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
27 views2 pages

Message Passing Interface Support For Parallel Computing 192

Uploaded by

NH Kim
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Message Passing Interface Support for Parallel Computing

Release 19.2

ANSYS Products Supported MPI Interconnect Notations

R Windows 7 IBM Platform MPI 9.1.4 Consult the MPI vendor for supported
DANSYS* Mechanical * Distributed ANSYS (including AUTODYN and Explicit STR)
R Windows 10 Intel MPI 2017.3.210 (default) interconnect hardware.

R Windows 7 IBM Platform MPI 9.1.4 (default) Protocols are supported for GIGE and
ANSYS Fluent
R Windows 10 Intel MPI 2017.3.210 Infiniband interconnects.
64-bit Windows

R Windows 7 IBM Platform MPI 9.1.4 Protocols are supported for GIGE and
ANSYS CFX
R Windows 10 Intel MPI 2017.3.210 (default) Infiniband interconnects.

R Windows 7 Consult the MPI vendor for supported


ANSYS Forte Intel MPI 2017.3.210 (default)
R Windows 10 interconnect hardware.

R Windows 7 ANSYS HFSS, Maxwell IBM Platform MPI 9.1.4 (default) Consult the MPI vendor for supported
R Windows 10 & Q3D Extractor Intel MPI 2018.1 interconnect hardware.

R Windows Server 2012 R2 Consult the MPI vendor for supported * Distributed ANSYS (including AUTODYN and Explicit STR)
DANSYS* Mechanical Microsoft HPC Pack (MS MPI)
R Windows Server 2016** interconnect hardware. ** Requires HPC pack 2016 update 1
Windows Servers 2012 & 2016

R Windows Server 2012 R2 Protocols are supported for GIGE and


ANSYS Fluent Microsoft HPC Pack (MS MPI)
R Windows Server 2016 Infiniband interconnects.

R Windows Server 2012 R2 Protocols are supported for GIGE and


ANSYS CFX Microsoft HPC Pack (MS MPI) ** Requires HPC pack 2016 update 1
R Windows Server 2016** Infiniband interconnects.

R Windows Server 2012 R2 Consult the MPI vendor for supported


ANSYS Forte Intel MPI 2017 3.210 (default)
R Windows Server 2016 interconnect hardware.

R Windows Server 2012 R2 ANSYS HFSS, Maxwell IBM Platform MPI 9.1.4 Consult the MPI vendor for supported
** Requires HPC pack 2016 update 1
R Windows Server 2016** & Q3D Extractor Intel MPI 2018.1 interconnect hardware.
ANSYS Products Supported MPI Interconnect Notations

R Red Hat 6.8 / 6.9


R Red Hat 7.2 / 7.3/ 7.4
R SLES / SLED 11 (SP3 - SP4) DANSYS* Mechanical
IBM Platform MPI 9.1.4 Consult the MPI vendor for supported
* Distributed ANSYS (including AUTODYN and Explicit STR)
R SLES / SLED 12 (SP1 - SP3) Intel MPI 2017.3.196 (default) interconnect hardware.
R CentOS 7.3
R CentOS 7.4

** Preferred for Omni-Path Architecture; functions with OFED 10.2 & higher
R Red Hat 6.8 / 6.9
*** Cray MPI is supported on all Cray XE and XC systems; Linux versions require a
R Red Hat 7.2 / 7.3 / 7.4 IBM Platform MPI 9.1.4 (default) Protocols are supported for GIGE and
minimum of Cray Linux Environment 6.0 update 03 (based on SUSE Linux Enterprise
R SLES / SLED 12 (SP1 - SP3) ANSYS Fluent Intel MPI 2017.3.196** Infiniband interconnects, including
Server 12); MPT versions require Cray MPT 7.x default for Fluent, and Cray MPT 5.x for
R CentOS 7.3 Cray MPI*** Omni-Path fabric. Fluent with special flags.
R CentOS 7.4

Omni-Path Architecture; functions with OFED 10.2 & higher


R Red Hat 6.8 / 6.9
64-bit Linux

R Red Hat 7.2 / 7.3 / 7.4


IBM Platform MPI 9.1.4 Protocols are supported for GIGE and *** Cray MPI is supported on all Cray XE and Cray XC systems: Linux versions require
R SLES / SLED 11 (SP3 - SP4)
ANSYS CFX Intel MPI 2017.3.196 (default) Infiniband interconnects, including a minimum of Cray Linux Environment 6.0 update 03 (based on SUSE Linux Enterprise
R SLES / SLED 12 (SP1 - SP3) Cray MPI*** Omni-Path fabric. Server 12); MPT versions require Cray MPT 7.x default for CFX.
R CentOS 7.3
R CentOS 7.4

R Red Hat 6.8 / 6.9


R Red Hat 7.2 / 7.3 / 7.4
R SLES / SLED 11 (SP3 - SP4) Consult the MPI vendor for supported
ANSYS Forte Intel MPI 2017.3.196 (default)
R SLES / SLED 12 (SP1 - SP3) interconnect hardware.
R CentOS 7.3
R CentOS 7.4

R Red Hat 6.8 / 6.9


R Red Hat 7.2 / 7.3 / 7.4
R SLES / SLED 11 (SP3-SP4) ANSYS HFSS, Maxwell IBM Platform MPI 9.1.4 (default) Consult the MPI vendor for supported
R SLES / SLED 12 (SP1 - SP3) & Q3D Extractor Intel MPI 2018.1 interconnect hardware.
R CentOS 7.3
R CentOS 7.4

You might also like