© Survivair 2006 RPI PN 670031 9/06

This document provides only an overview of the respiratory products show n. It does not provide
important product warnings and instructions. Survivair recommends all users of respiratory equip-
ment undergo thorough training and that all warnings and instructions provided w ith the products
be thoroughly read and understood prior to use. Failure to read and follow all product warnings and
instructions may result in serious personal injury, illness or death.

Survivair
3001 South Susan Street
Santa Ana, CA 92704 USA
Customer Service: 800.821.7236
w w w.survivair.com

w w w.bacou-dalloz.com
 survivair® product guide

one source | one system more faces and applications

survivair respirators | apr | papr | sar | scba
®

our new survivair® system of respirators is designed to give you a better fit.

Survivair has been protecting firefighters from One Source, One System:
smoke, fumes and toxic gases, and industrial workers Survivair Versatility and Value.
against respiratory hazards in all kinds of environ-
As indicated by the icons below, selected lines of
ments since 1961. Willson ® has been manufacturing
Survivair half mask and full facepiece respirators can
respirators for over 80 years. Now, with the addition
accept both threaded (S-Series) and bayonet (T-
of Willson reusable respiratory products to the
Series) type cartridges.
Survivair line, we offer the industry’s most compre-
hensive system of air purifying respirators (APR), Our S-Series cartridges are approved on all
powered air purifying respirators (PAPR), supplied Survivair reusable facepieces. The traditional
air respirators (SAR) and self-contained breathing threaded design is easy to use and is widely
apparatus (SCBA). With fourteen half mask styles accepted throughout the industry. With the S-
and sizes, six full facepiece configurations, and our Series able to fit our entire reusable respirator
consolidated cartridge line, Survivair respirators pro- line, Survivair can offer a broad selection with
vide one source for more faces and applications. one cartridge system.

In this product guide we have compiled the informa- The T-Series allows an additional option for
tion you need to better understand your respiratory your Survivair reusable respirator. The positive
protection needs and to select the best range of prod- locking cartridge connector offers an audible
ucts for your application. Though abbreviated in this lock to assure correct cartridge attachment as
brochure, full text on all of these products is avail- well as an open flow lid design and large
able on our web site: www.survivair.com inhalation ports for improved breathing resist-
ance.
Survivair products meet or exceed all relevant indus-
try standards, including NIOSH, NFPA, and CBRN. Comfort, protection, versatility and value.
When you’re on the job, you know you can be safe They all add up to Survivair.
and secure with Survivair.
threaded cartridges
For additional information, our customer service rep- This icon indicates selected Survivair® products that
resentatives are always available to answer questions will accept threaded (S SE RI E S )* cartridges.

or help you locate a Survivair distributor in your

area. Call 800.821.7236.

bayonet cartridges
This icon indicates selected Survivair® products that
will accept bayonet (T SE RI E S )* cartridges.

*See individual products for conversion kit ordering information.

Survivair has partnered with OSHAMedCert™ to offer a fully web-based online
respirator medical evaluation and tracking system that is easy to use, reliable and
cost effective. Through this site,www.survivair.com/oshamedcert, users have the
opportunity to receive medical certification in 5 to 10 minutes.
Survivair’s on line medical evaluation program provides certification for
employees that are required to use filtering facepiece respirators (dust masks),
half mask, or full facepiece respirators. Most users qualify by simply completing
the online evaluation. Those that do not qualify on the first attempt may still
qualify after a follow-up on-line Q&A session with a board certified physician.
The follow-up questions are evaluated by the on-line medical staff and a response
will be provided within 24-hours.

230096 OSHAMedCert Online Medical Evaluation

1
 apr air purifying respirators
half masks

step 1 select a half mask

s-series half mask (shown)
t-series half mask
■ survivair valuair® plus (shown)
■ survivair blue 1™
■ survivair 2000 series
■ survivair premier®
■ survivair premier® plus

Survivair VALUAIR® Plus Survivair Blue 1™

economical
Great value and easy to adjust. Dual flange protection with optional
The VALUAIR® Plus series provides an speaking diaphragm. The innovative
excellent choice for limited use, limited Survivair Blue 1™ was the industry’s first
step 2 select a cartridge life applications. VALUAIR® Plus combines silicone half mask respirator, and the first
s-series (shown) | t-series NIOSH-approved protection with low to offer an optional speaking diaphragm.
■ organic vapors breathing resistance and the comfort of Made of comfortable, pliable silicone,
■ acid gasses
more expensive respirators. the mask will not lose elasticity even in
■ organic vapor/acid gasses
■ ammonia/methylamine • Thermoplastic elastomer facepiece reduces cost extreme hot or cold weather. An excellent
■ mercury vapor or chlorine • Soft sealing flange and forward angled choice for professionals, the Survivair
■ multi-contaminent nosepiece easily accommodate eyewear Blue 1™ can accept the full range of
■ nitrogen dioxide • Perspiration port Survivair threaded replacement
■ organic vapors/p100
• Easy to adjust, 3-piece sliding suspension cartridges/filters.
■ acid gasses/p100
■ organic vapor/acid gasses/p100 • Facepiece replacement parts are available
• Available in three sizes • Economical solution for improving wearer
■ ammonia/methylamine/p100 communication
■ mercury vapor or chlorine/p100
• Dual sealing flange provides excellent
■ multi-contaminent/p100
facepiece seal for secure fit
■ nitrogen dioxide/p100
• Easily convertible to Continuous Flow SAR
without the aid of tools
• Available in three sizes

recommended use recommended use

Ideal for limited use, limited life applications Excellent value for professional users in a variety of
without sacrificing comfort and fit. applications who desire a secure, comfortable fit and
an option for speech enhancement.

ordering information ordering information

s-series s-series
step 3 select a filter
301500 Small Basic Facepiece Assembly b210000 Small Basic Assembly
s-series | t-series
302500 Medium Basic Facepiece Assembly b220000 Medium Basic Assembly
n95 | n99 | r95 | p100 303500 Large Basic Facepiece Assembly b230000 Large Basic Assembly
301599 Small Probed Facepiece b210010 Small Assembly with Speaking Diaphragm
302599 Medium Probed Facepiece b220010 Medium Assembly with Speaking Diaphragm
303599 Large Probed Facepiece b230010 Large Assembly with Speaking Diaphragm
b210099 Small Probed Assembly
t-series b220099 Medium Probed Assembly
301000 Small Basic Facepiece Assembly b230099 Large Probed Assembly
302000 Medium Basic Facepiece Assembly
303000 Large Basic Facepiece Assembly
step 4 select a filter base 301099 Small Probed Facepiece
s-series (shown) | t-series 302099 Medium Probed Facepiece
303099 Large Probed Facepiece
301110 Small Respirator with Organic Vapor and n95
302110 Medium Respirator with Organic Vapor
and n95
303110 Large Respirator with Organic Vapor and n95
301120 Small Respirator with Organic Vapor and r95
302120 Medium Respirator with Organic Vapor
step 5 select a filter retainer and r95
s-series (shown) | t-series 303120 Large Respirator with Organic Vapor and r95

2
Survivair 2000 Series Survivair PREMIER® Survivair PREMIER® Plus
premium
Lightweight and easy to maintain. Low breathing resistance for maximum Triple flange design equals superior fit,
With its comfortable silicone facepiece, comfort. One of the easiest breathing comfort and protection. The Survivair
this durable, user-friendly half mask air respirators of its type, the Survivair Premier® Plus is our top-of-the-line half
purifying respirator can withstand years of Premier® incorporates a perspiration port mask respirator. Made of soft silicone,
washing and use. One of the industry’s to reduce facepiece slippage and skin it is extremely comfortable, flexible and
lightest respirators, the 2000 Series irritation. This high quality, silicone durable. A triple flange fits a wide variety
features an innovative yoke design, and respirator includes a soft sealing flange of facial types.
an angled, self-adjusting nose bridge to with rolled edges for increased wearer • Wide, wraparound, pleated silicone facepiece
accommodate safety or prescription comfort. fits a large variety of facial types
eyewear. • Elastic headstraps adjust at the crown for easy fit and • Lateral placement of exhalation valve and
unobstructed vision cartridge ports enhances field of vision
• Durable, lightweight silicone facepiece • Cradle suspension with four-point floating yoke elimi-
construction • Low profile nosepiece allows for compatibility
with eyewear nates pressure points to enhance comfort
• Large, pliable sealing area for secure fit for almost any
• Lower breathing resistance than most other • Available in two sizes: small and medium/large
facial type
• Improved yoke and head harness design available models
reduce facepiece slippage • Available in three sizes
• Sliding adjustment system on head harness
keeps loose straps secure
• Easily converts to belt-mounted PAPR without
the aid of tools
• Available in three sizes

recommended use recommended use recommended use

Professional users who seek a lightweight Ideal for professional users seeking comfort. A triple flange design provides the ultimate in
respirator that will provide protection in a wide variety Low breathing resistance for maximum comfort. comfort and superior fit for extended wear.
of applications.

ordering information ordering information ordering information

s-series s-series s-series
b250000 Small Basic Assembly 311500 Small Basic Assembly with Elastic Headstraps 321500 Small Basic Assembly
b260000 Medium Basic Assembly 312500 Medium Basic Assembly with Elastic 322500 Medium/Large Basic Assembly
b270000 Large Basic Assembly Headstraps 321510 Small Respirator with Organic Vapor
b250099 Small Probed Assembly 313500 Large Basic Assembly with Elastic Headstraps and n95
b260099 Medium Probed Assembly 311510 Small Basic Assembly with Rubber Headstraps 322510 Medium/Large Respirator with Organic
b270099 Large Probed Assembly 312510 Medium Basic Assembly with Rubber Vapor and n95
Headstraps 321599 Small Probed Assembly
313510 Large Basic Assembly with Rubber Headstraps 322599 Medium/Large Probed Assembly
t-series t-series
311000 Small Basic Assembly with Elastic Headstraps 321000 Small Basic Assembly
312000 Medium Basic Assembly with Elastic 322000 Medium/Large Basic Assembly
Headstraps 321020 Small Organic Vapor/ n95
313000 Large Basic Assembly with Elastic Headstraps 322020 Medium/Large Organic Vapor/ n95
311010 Small Basic Assembly with Rubber Headstraps 321099 Small Probed Assembly
312010 Medium Basic Assembly with Rubber 322099 Medium/Large Probed Assembly
Headstraps
313010 Large Basic Assembly with Rubber Headstraps
311099 Small Probed Assembly
312099 Medium Probed Assembly
313099 Large Probed Assembly
311110 Small Respirator with Organic Vapor and n95
312110 Medium Respirator with Organic Vapor
and n95
313110 Large Respirator with Organic Vapor and n95
313120 Small Respirator with Organic Vapor and r95
311130 Medium Respirator with Organic Vapor
and r95
312120 Large Respirator with Organic Vapor and r95
313120 Small Respirator with Unisorb and r95
312820 Medium Respirator with Unisorb and r95
313820 Large Respirator with Unisorb and r95
3
 apr air purifying respirators
full facepieces

step 1 select a full facepiece

s-series full facepiece (shown)
t-series full facepiece
■ survivair opti-fit ™ (shown)
■ survivairmax®
■ survivair 4000 series

Survivair Opti-Fit™ APR SurvivairMAX® APR

Optimum fit, comfort and superior optics Maximize your choice of headgear.
in a full face respirator. The Opti-Fit™ offers SurvivairMax® respirators offer an
the ultimate in performance and affordabil- excellent field of vision, maximizing safety,
ity. With features usually reserved for more comfort and wearer acceptance. Available
expensive respirators, the Opti-Fit™ can with a choice of three headgear styles—
step 2 select a cartridge help you get the most from your respirato- five-strap, Tite-Seal ®, or non-slip mesh for
s-series | t-series (shown) ry protection budget. Opti-Fit™ features a hard hat use.
■ organic vapors distortion-free lens with exceptional view. • High-grade soft silicone facepieces available in
■ acid gasses
Lightweight construction reduces head three sizes
■ organic vapor/acid gasses
■ ammonia/methylamine
and neck stress even during extended wear. • Double-sealing flange for optimum fit
■ mercury vapor or chlorine Three sizes fit almost any facial type. • Distortion-free lens with anti-fog and anti-scratch
■ multi-contaminent coatings provides outstanding optical clarity in the
• Full-feature respirator priced at nearly half the cost of most demanding environments
■ nitrogen dioxide
traditional full facepieces • Optional floating prescription lens insert for spectacle
■ organic vapors/p100
■ acid gasses/p100
• Comfortable, durable silicone skirt and five-strap wearers
■ organic vapor/acid gasses/p100
suspension • Simple disassembly and reassembly for ease of
■ ammonia/methylamine/p100 • Nose cup is a standard feature to prevent fogging maintenance
■ mercury vapor or chlorine/p100 • Lens is replaceable and treated with an anti-scratch • Economy-version also available
■ multi-contaminent/p100 coating • Available accessories include clear and tinted lens
■ nitrogen dioxide/p100 • Easily converts to CF SAR covers, headstrap and neckstrap kits, spectacles kit,
• Available accessories include clear and tinted lens anti-fog wipes and anti-fog solution
covers, headstrap and neckstrap kits, spectacles kit,
anti-fog wipes and anti-fog solution

recommended use recommended use

Offers the ultimate level of value and functionality, Three optional headgear options provide maximum
while helping users get the most out of their versatility to suit most any application.
respiratory protection budget.

ordering information ordering information

s-series s-series
752000 Small Opti-Fit™ APR 801500 Small Economy Facepiece, 5-Strap
step 3 select a filter 762000 Medium Opti-Fit™ APR 802500 Medium Economy Facepiece, 5-Strap
s-series | t-series 772000 Large Opti-Fit™ APR 803500 Large Economy Facepiece, 5-Strap
n95 | n99 | r95 | p100
t-series t-series
758000 Small Opti-Fit™ APR 821000 Small Facepiece, 5-Strap
768000 Medium Opti-Fit™ APR 822000 Medium Facepiece, 5-Strap
778000 Large Opti-Fit™ APR 823000 Large Facepiece, 5-Strap
831000 Small Facepiece, Tite-Seal
accessories 832000 Medium Facepiece, Tite-Seal
702074 Small Clear Nosecup 833000 Large Facepiece, Tite-Seal
step 4 select a filter base 702075 Medium Clear Nosecup 841000 Small Facepiece, Mesh
s-series | t-series (shown) 702076 Large Clear Nosecup 842000 Medium Facepiece, Mesh
763076 Gas Mask Bag 843000 Large Facepiece, Mesh
702019 Tinted Peel-off Lens Covers (25 Each) 851000 Small Economy Facepiece, 5-Strap
702028 Clear Peel-off Lens Covers (25 Each) 852000 Medium Economy Facepiece, 5-Strap
702031 Neckstrap Kit 853000 Large Economy Facepiece, 5-Strap
702042 Operation & Maintenance Video (English) 821099 Small Probed 5-Strap
702046 Operation & Maintenance CD-ROM (English) 822099 Medium Probed 5-Strap
962260 Spectacles Kit 823099 Large Probed 5-Strap
step 5 select a filter retainer 981803 Anti-Fog Wipes (Box of 100) 831099 Small Probed Tite-Seal
s-series | t-series (shown) 951015 Lens Anti-Fog Solution (1 oz.) 832099 Medium Probed Tite-Seal
951016 Lens Anti-Fog Solution (16 oz.) 833099 Large Probed Tite-Seal
841099 Small Probed Mesh
842099 Medium Probed Mesh
843099 Large Probed Mesh
accessories
14901010 Prescription Spectacle Adapter
14901011 Clear Lens Cover
14901012 Blue Lens Cover
14901017 Prescription Spectacle Adapter Mounting
4 14900043 Neckstrap Kit
 apr air purifying respirators
s-series cartridges and filters

filters
n95 filter
95% efficient against particulate
aerosols free of oil
filter base b140074
filter 106010
retainer 140170 (2/pkg)
niosh approval tc-84a-1426 (hm)
tc-84a-1413 (4000)
tc-84a-1419 (of, max)
tc-84a-1433 (bm)

gas | vapor protection

organic vapors ov/n95 filter
Approved for use against Organic Vapors cartridge B100100
s-series s01 filter 106010
organic vapors cartridge b100100 retainer 140170 (2/pkg)
(ov) niosh approval tc-23c-287 (hm) niosh approval tc-84a-1427 (hm)
tc-23c-351 (4000) tc-84a-1414 (4000)
tc-23c-1782 (of, max) tc-84a-1420 (of, max)
tc-84a-1434 (bm)

acid gases ag/n95 filter

Approved for use against Chlorine | Hydrogen Chloride | cartridge b100200
Sulfur Dioxide | Formaldehyde
filter 106010
acid gases s-series s06 retainer 140170 (2/pkg)
(ag) cartridge b100200 niosh approval tc-84a-1428 (hm)
niosh approval tc-23c-430 (hm) tc-84a-1415 (4000)
tc-23c-429 (4000) tc-84a-1421 (of, max)
tc-23c-1783 (of, max) tc-84a-1435 (bm)

organic vapors | acid gases ov/ag/n95 filter

Approved for use against Organic Vapors | Chlorine | cartridge b100300
Hydrogen Chloride | Sulfur Dioxide | Chlorine Dioxide |
filter 106010
organic vapors/ Hydrogen Fluoride | Hydrogen Sulfide (Escape)
retainer 140170 (2/pkg)
acid gases s-series s05 niosh approval tc-84a-1429 (hm)
(ov/ag) cartridge b100300 tc-84a-1416 (4000)
niosh approval tc-23c-318 (hm) tc-84a-1422 (of, max)
tc-23c-454 (4000) tc-84a-1436 (bm)
tc-23c-1784 (of, max)

ammonia | methylamine am/ma/n95 filter

Approved for use against Ammonia | Methylamine cartridge b100400
s-series s04 filter 106010
ammonia/ retainer 140170 (2/pkg)
methylamine cartridge b100400
niosh approval tc-84a-1430 (hm)
niosh approval tc-23c-422 (hm)
(am/ma) tc-23c-423 (4000) tc-84a-1417 (4000)
tc-84a-1423 (of, max)
tc-23c-1785 (of, max)
tc-84a-1437 (bm)

multi-contaminant mc/n95 filter

Approved for use against Organic Vapors | Ammonia | cartridge 100800
Methylamine | Chlorine | Hydrogen Chloride |
Sulfur Dioxide | Chlorine Dioxide | Hydrogen Fluoride | filter 106010
multi-contaminant Hydrogen Sulfide (Escape) | Formaldehyde | Nitrogen Dioxide retainer 140170 (2/pkg)
(mc) niosh approval tc-84a-1432 (hm)
s-series s08 tc-84a-1418 (4000)
cartridge 100800 tc-84a-1425 (of, max)
niosh approval tc-23c-1803 (hm) tc-23c-1806 (of, max) tc-84a-1439 (bm)
tc-23c-1804 (4000) tc-23c-1805 (bm)

mercury vapor or chlorine mv/cl/n95 filter

Approved for use against Mercury | Chlorine Vapor cartridge 100600
s-series s07 filter 106010
mercury vapor cartridge 100600 retainer 140170 (2/pkg)
or chlorine niosh approval tc-23c-1483 (hm) niosh approval tc-84a-1431 (hm)
(mv/cl) tc-23c-1786 (of, max) tc-84a-1424 (of, max)
tc-23c-1483 (bm) tc-84a-1438 (bm)

6
 combined cartridges
n99 filter r95 filter p100 filters
99% efficient against particulate 95% efficient against oil | 99.97% efficient against all particulate
aerosols free of oil 99% efficient against non-oil based aerosols
particulates | Time use restrictions
filter base b140074 apply for oil-based particulates s-series (micro)
filter 107010 filter 105005
retainer 140170 (2/pkg) filter base b140074 niosh approval tc-84a-1239 (hm)
niosh approval tc-84a-1804 (hm) filter 107010 tc-84a-1240 (4000)
tc-84a-1791 (4000) retainer 140170 (2/pkg) tc-84A-1242 (of, max)
tc-84a-1797 (of, max) niosh approval tc-84a-1804 (hm) tc-84a-1241 (bm)
tc-84a-1811 (bm) tc-84a-1791 (4000)
tc-84a-1797 (of, max) s-series (slimline)
tc-84a-1811 (bm) filter 119010
niosh approval tc-84a-3066 (hm)
tc-84a-3067 (4000)
tc-84a-3072 (of, max)
tc-84a-3068 (bm)
ov/n99 filter ov/r95 filter ov/p100 filter
cartridge b100100 cartridge b100100 cartridge 105110
filter 107010 filter 107010 niosh approval tc-84a-0439 (hm)
retainer 140170 (2/pkg) retainer 140170 (2/pkg) tc-84a-0440 (4000)
niosh approval tc-84a-1805 (hm) niosh approval tc-84a-1805 (hm) tc-84a-0877 (of, max)
tc-84a-1792 (4000) tc-84a-1792 (4000) TC-84a-2001 (bm)
tc-84a-1798 (of, max) tc-84a-1798 (of, max)
tc-84a-1812 (bm) tc-84a-1812 (bm)

ag/n99 filter ag/r95 filter ag/p100 filter

cartridge b100200 cartridge b100200 cartridge 105210
filter 107010 filter 107010 niosh approval tc-84a-0441 (hm)
retainer 140170 (2/pkg) retainer 140170 (2/pkg) tc-84a-0442 (4000)
niosh approval tc-84a-1806 (hm) niosh approval tc-84a-1806 (hm) tc-84a-0878 (of, max)
tc-84a-1793 (4000) tc-84a-1793 (4000) tc-84a-2002 (bm)
tc-84a-1799 (of, max) tc-84a-1799 (of, max)
tc-84a-1813 (bm) tc-84a-1813 (bm)

ov/ag/n99 filter ov/ag/r95 filter ov/ag/p100 filter

cartridge b100300 cartridge b100300 cartridge 105310
filter 107010 filter 107010 niosh approval tc-84a-0443 (hm) ValuAir ® Plus
retainer 140170 (2/pkg) retainer 140170 (2/pkg) tc-84a-0444 (4000) Blue 1 ™
niosh approval tc-84a-1807 (hm) niosh approval tc-84a-1807 (hm) tc-84a-0879 (of, max) 2000 Series
tc-84a-1794 (4000) tc-84a-1794 (4000) tc-84a-0445 (bm) Premier ®
tc-84a-1800 (of, max) tc-84a-1800 (of, max) Premier ® Plus
tc-84a-1814 (bm) tc-84a-1814 (bm) Opti-Fit ™
SurvivairMax ®
4000 Series
am/ma/n99 filter am/ma/r95 filter am/ma/p100 filter
HM = Half Mask
cartridge b100400 cartridge b100400 cartridge 105410 FF = Full Facepiece
filter 107010 filter 107010 niosh approval tc-84a-0446 (hm) 4000 = Classic Mask
retainer 140170 (2/pkg) retainer 140170 (2/pkg) tc-84a-0447 (4000) OF = Opti-Fit™
niosh approval tc-84a-1808 (hm) niosh approval tc-84a-1808 (hm) tc-84a-0880 (of, max) Max = SurvivairMax®
tc-84a-1795 (4000) tc-84a-1795 (4000) tc-84a-2003 (bm) BM = Half Mask Belt Mount
tc-84a-1801 (of, max) tc-84a-1801 (of, max)
tc-84a-1815 (bm) tc-84a-1815 (bm) Organic Vapors (OV)

mc/n99 filter mc/r95 filter mc/p100 filter Acid Gases (AG)

cartridge 100800 cartridge 100800 cartridge 105810
filter 107010 filter 107010 niosh approval tc-84a-1022 (hm) Organic Vapors | Acid Gases (OV/AG)
retainer 140170 (2/pkg) retainer 140170 (2/pkg) tc-84a-1023 (4000)
niosh approval tc-84a-1810 (hm) niosh approval tc-84a-1810 (hm) tc-84a-1024 (of, max)
Ammonia | Methylamine (AM/MA)
tc-84a-1796 (4000) tc-84a-1796 (4000) tc-84a-2004 (bm)
tc-84a-1803 (of, max) tc-84a-1803 (of, max)
tc-84a-1817 (bm) tc-84a-1817 (bm) Multi-Contaminant (MC)

mv/cl/n99 filter mv/cl/r95 filter mv/cl/p100 filter Mercury Vapor or Chlorine (MV/CL)

cartridge 100600 cartridge 100600 cartridge 105610

p100 – Radioactive Material
filter 107010 filter 107010 niosh approval tc-84a-0448 (hm)
retainer 140170 (2/pkg) retainer 140170 (2/pkg) tc-84a-0881 (of, max)
niosh approval tc-84a-1809 (hm) niosh approval tc-84a-1809 (hm) tc-84a-0449 (bm)
tc-84a-1802 (of, max) tc-84a-1802 (of, max)
tc-84a-1816 (bm) tc-84a-1816 (bm)

7
 combined cartridges
n99 filter r95 filter p100 filters
99% efficient against particulate 95% efficient against oil | 99.97% efficient against all particulate
aerosols free of oil Time use restrictions apply for aerosols
oil-based particulates
filter base 14900578 (rp21) filter t105005
filter t107010 filter base 14900578 (rp21) niosh approval tc-84a-236 ( hm)
retainer 14900975 (rp22r) filter t117010 tc-84a-2649 (of, max)
niosh approval tc-84a-733 (hm) retainer 14900975 (rp22r)
t-series (low profile)
tc-84a-2637 (of, max) niosh approval tc-84a-4182 (hm)
tc-84a-4124 (of, max) filter t108010
niosh approval tc-84a-2904 (hm)
tc-84a-2905 (of, max)

ov/n99 filter ov/r95 filter ov/p100 filter

cartridge t100100 cartridge t100100 cartridge t105110
filter t107010 filter t117010 niosh approval tc-84a-238(hm)
retainer 14900975 (rp22r) retainer 14900975 (rp22r) tc-84a-2650 (of, max)
niosh approval tc-84a-735 (hm) niosh approval tc-84a-4183 (hm)
tc-84a-2638 (of, max) tc-84a-4125 (of, max)

ag/n99 filter ag/r95 filter ag/p100 filter

cartridge t100200 cartridge t100200 cartridge t105210
filter t107010 filter t117010 niosh approval tc-84a-244 (hm)
retainer 14900975 (rp22r) retainer 14900975 (rp22r) tc-84a-2653 (of, max)
niosh approval tc-84a-741 (hm) niosh approval tc-84a-4186 (hm)
tc-84a-2641 (of, max) tc-84a-4128 (of, max)

ov/ag/n99 filter ov/ag/r95 filter ov/ag/p100 filter

cartridge t100300 cartridge t100300 cartridge t105310
filter t107010 filter t117010 niosh approval tc-84a-242 (hm)
retainer 14900975 (rp22r) retainer 14900975 (rp22r) tc-84a-2652 (of, max)
niosh approval tc-84a-739 (hm) niosh approval tc-84a-4185 (hm)
tc-84a-2640 (of, max) tc-84a-4127 (of, max)

ValuAir ® Plus
Premier ®
Premier ® Plus
am/ma/n99 filter am/ma/r95 filter am/ma/p100 filter Opti-Fit ™
cartridge t100400 cartridge t100400 cartridge t105410 SurvivairMax ®
filter t107010 filter t117010 niosh approval tc-84a-240 (hm) HM = Half Mask
retainer 14900975 (rp22r) retainer 14900975 (rp22r) tc-84a-2651 (of, max) OF = Opti-Fit™
niosh approval tc-84a-737 (hm) niosh approval tc-84a-4184 (hm) Max = SurvivairMax®
tc-84a-2639 (of, max) tc-84a-4126 (of, max)
Organic Vapors (OV)

Acid Gases (AG)

mc/n99 filter mc/r95 filter mc/p100 filter
cartridge t100800 cartridge t100800 cartridge t105810 Organic Vapors | Acid Gases (OV/AG)
filter t107010 filter t117010 niosh approval tc-84a-246 (hm)
retainer 14900975 (rp22r) retainer 14900975 (rp22r) tc-84a-2654 (of, max)
Ammonia | Methylamine (AM/MA)
niosh approval tc-84a-743 (hm) niosh approval tc-84a-4187 (hm)
tc-84a-2642 (of, max) tc-84a-4129 (of, max)
Multi-Contaminant (MC)

Nitrogen Dioxide (ND)

nd/n99 filter nd/r95 filter nd/p100 filter
cartridge t100900 cartridge t100900 cartridge t105910 Mercury Vapor or Chlorine (MV/CL)
filter t107010 filter t117010 niosh approval tc-84a-3232 (hm)
retainer 14900975 (rp22r) retainer 14900975 (rp22r) tc-84a-3231 (of, max) p100 – Radioactive Material
niosh approval tc-84a-3216 (hm) niosh approval tc-84a-4232 (hm)
tc-84a-3212 (of, max) tc-84a-4181 (of, max)

mv/cl/r95 filter mv/cl/p100 filter

cartridge t100600 cartridge t105610
filter t117010 niosh approval tc-84a-2982 (hm)
retainer 14900975 (rp22r) tc-84a-2984 (of, max)
niosh approval tc-84a-4231 (hm)
tc-84a-4179 (of, max)

9
 apr air purifying respirators
apr accessories escape respirators

Welding Mask and Accessories Respiratory Fit Test Kits Survivair Mouthbit
• Survivair’s welding products include a unique Survivair OSHA-accepted fit test kits The Survivair mouthbit air purifying
low-profile, belt-mounted half mask respirator that provide you with an easy and affordable respirator provides simple, comfortable
has been designed to work with traditional welding method of qualitative fit testing for both and convenient filtered air in an acid gas
shields and helmets. The cartridges and/or filters are disposable particulate and reusable emergency escape situation. Extremely
suspended from a single low-pressure hose on a
respirators. lightweight, with a narrow profile design
plenum that’s worn over the shoulder and out of the
way, on the user’s back
and low breathing resistance, the unit
irritant smoke fit test kit can be donned in ten seconds or less.
• The welding shield attachment easily clamps onto
• Simple and accurate method of fit testing
the Survivair 4000 Series (black only) facepiece lens • Mouthpiece and nose clip made of soft, pliable
without the use of tools or mask disassembly • Available with either a low flow pump or a
squeeze bulb material
• Each Welding Shield includes a choice of either a • Breakaway lanyard included
shade 10 lens, an Auto-Darkening Fixed Shade 10 • Each kit includes 6 smoke tubes that provide testing
of approximately 25 wearers per tube • Resealable, tamper-resistant packaging with
lens, or an Auto-Darkening Variable Shade 9-12 lens instructions
• Flame retardant bibs are also available which • Respirator must be equipped with p100 filters
• Optional reusable nylon carry pouch
easily snap onto any welding shield providing isoamyl acetate (iaa) fit test kit
extra protection to a wearer’s neck, forehead and recommended use
• Handles up to 50 tests with 2 replacement
cartridges/filters
vials of IAA and a test enclosure Mouthbit respirator for escape from chlorine, chlorine
• Respirator must be equipped with organic vapor dioxide, sulfur dioxide, hydrogen sulfide, or hydrogen
cartridges chloride.
bitrex fit test kits ordering information
• Extremely bitter solution (Denatonium Benzoate) 600200 Acid Gas Mouthbit Respirator
that will be easily detected by the test subject
• Respirator must be equipped with minimum accessories
n95 filters 600250 Nylon Carrying Pouch
600251 Mouthpiece Cover
saccharin fit test kits 600265 Lanyard
• Eliminates the need for special filters 600267 Belt Clip
• Useful for dust/mist respirators
fit test videos
Survivair Fit Test Videos provide step-by-step
instructions to ensure your fit testing complies
with OSHA-accepted guidelines.
mask assemblies

ordering information ordering information

250050 Small belt-mounted 2000 Series half 140090 Irritant Smoke Fit Test Kit
mask assembly with breathing hose and 140038 Replacement Tubes, Irritant Smoke – 6/Box
belt-mounted plenum 14901014 Irritant Smoke Fit Test Kit with Pump
260050 Medium belt-mounted 2000 Series half 193140 Isoamyl Acetate (IAA) Fit Test Kit
mask assembly with breathing hose and 193170 Bitrex Fit Test Kit
belt-mounted plenum
193171 Bitrex Fit Solution
270050 Large belt-mounted 2000 Series half
mask assembly with breathing hose and 193172 Bitrex Sensisitivity Solution
belt-mounted plenum 194040 Deluxe Fit Test Kit, IAA Escape Breathing Apparatus (EBA)
410079 Small, Black, 4000 Series 5-pt full facepiece 420025 Probed Fit Test Adapter, QNFT, S-Series
with nose cup facepieces The Survivair Escape Breathing Apparatus
420079 Standard, Black, 4000 Series 5-pt full 193120 Saccharin Fit Test Kit (EBA-5 and EBA-10) is easy to use, it can be
facepiece with nose cup 193107 Replacement hood for Saccharin
donned and functioning in seconds.
Fit Test Kit
apr accessories 194064 Fit Test Cards, Replacement The EBA-5/10 supplies five or ten minutes
200101 Survivair Tote Bag 260108 Video, Respirator Care & Maintenance
b140096 Mask Cleaning Wipes – 100 Wipes/Box of emergency breathing air, giving your
260109 CD-ROM, Respirator Care & Maintenance
140082 Mask Cleaning Wipes – 220 Wipes/Canister 260089 Video, Fit Testing
workers the time they need to safely escape
940118 Half Mask and Full Facepiece Zipper from toxic or oxygen-deficient atmospheres.
Storage Bag – 13 x 15"
430000 Shade with #10 Lens
430030 Shade with Auto-darkening Variable #9–12 975080 5-Minute Escape Breathing Apparatus (EBA-5)
430035 Replacement Auto-darkening Variable 975090 10-Minute Escape Breathing Apparatus (EBA-10
#9–12 975190 5-Minute High-Flow Escape Breathing
430005 Lower Bib Apparatus (EBA-HF5)
430010 Upper Bib
140105 Spark Covers for Slimline P100 Filters
apr conversion kits (s-series)
981415 CF Conversion Kit (Opti-Fit™ APR to CF SAR)
with tube
981416 CF Conversion Kit (Opti-Fit™ APR to CF SAR)
with upgraded tube
764020 Nozzel Kit (Opti-Fit™ APR to PAPR)
Includes Nozzle and Cover
981209 Hose Conversion Kit, SAR with P100 Filter
(4000 Series)
981205 Hose Conversion Kit, SAR (4000 Series)

10
papr powered air purifying respirators

step 1 select a style

mask mounted Mask-Mounted Belt-Mounted
■ opti-fit mask mounted
■ 4000 series mask mounted • Lightweight unit will not slow worker efficiency • Available in silicone full facepiece, half mask or
with 4-point headstrap • Silicone facepiece offers high durability and Tyvek® hood
■ 4000 series mask mounted unmatched comfort • Single bib hood offers flexible alternative to
with 5-point headstrap • Speaking diaphragm enhances wearer tight-fitting facepieces
belt mounted communication • Battery pack and blower kit and filters fit
■ opti-fit belt mounted • Easily converts to Air Purifying (APR) or CF SAR comfortably on wearer’s hips
• Long-lasting battery pack with trouble-free • Motor provides high air flow rate
■ 4000 series belt mounted
with 4-point headstrap recharging • Long-lasting battery pack with trouble-free
• Water resistant battery pack is contoured for recharging
■ 4000 series belt mounted
with 5-point headstrap wearer comfort • Water resistant battery pack is contoured for
• Includes: facepiece, blower, battery charger, wearer comfort
■ 2ooo series half mask for
belt mounted blower and battery power cord, HE filter, belt and air flow tester • Includes facepiece and breathing tube
• Blower kit and high efficiency filters sold separately

ordering information ordering information

520500 Small Opti-Fit™ PAPR, Mask-Mounted, 540510 Small Opti-Fit™ PAPR Facepiece Kit for
With Battery and Blower Belt-Mounted Blower and Battery
520600 Medium Opti-Fit™ PAPR, Mask-Mounted, 540610 Medium Opti-Fit™ PAPR Facepiece Kit for
With Battery and Blower Belt-Mounted Blower and Battery
520700 Large Opti-Fit™ PAPR, Mask-Mounted, 540710 Large Opti-Fit™ PAPR Facepiece Kit for
With Battery and Blower Belt-Mounted Blower and Battery
510000 Small 4000 Series Facepiece, with 4-Point 530083 Small 4000 Series Facepiece Kit,
Headstrap, Battery and Blower with 5-Point Headstrap for Belt Mounted
520000 Standard 4000 Series Facepiece, with Blower and Battery
4-Point Headstrap, Battery and Blower 540083 Standard 4000 Series Facepiece Kit,
510015 Small 4000 Series Facepiece, with 5-Point with 5-Point Headstrap for Belt Mounted
Headstrap, Battery and Blower Blower and Battery
520015 Standard 4000 Series Facepiece, with 530085 Small 4000 Series Facepiece Kit,
5-Point Headstrap, Battery and Blower with 4-Point Headstrap for Belt Mounted
Blower and Battery
parts & accessories 540085 Standard 4000 Series Facepiece Kit,
108000 PAPR Filter, High Efficiency (HE) with 4-Point Headstrap for Belt Mounted
step 2 select a blower | battery kit (Box of 4/Each) Blower and Battery
required for belt mounted 108044 PAPR Filter, High Efficiency (HE) 550085 Small 2000 Series Half Mask Kit for Belt
(Bulk Pack - 84/Each) Mounted Blower and Battery
520020 Blower Unit, Mask-Mounted 560085 Medium 2000 Series Half Mask Kit for Belt
520030 Power Cord, Mask-Mounted Mounted Blower and Battery
520060 Battery Pack, Mask-Mounted 570085 Large 2000 Series Facepiece Kit for Belt
520072 Ten Unit Battery Charger Mounted Blower and Battery
981177 Filter Shower Cap With Holes 500085 Belt-Mounted PAPR Blower and Battery
981178 Filter Shower Cap Without Holes Kit Assembly
590085 Tyvek Single Bib Hood
parts & accessories
108000 PAPR Filter, High Efficiency (HE)
(Box of 4/Each)
108044 PAPR Filter, High Efficiency (HE)
(Bulk Pack - 84/Each)
540050 Blower Unit, Belt-Mounted
540030 Power Cord, Belt-Mounted
540060 Battery Pack, Belt-Mounted
981177 Filter Shower Cap With Holes
981178 Filter Shower Cap Without Holes
981814 Hard Hat Adapter for Hood (#891820)
Hard Hat Not Included

11
 sar supplied air respirators
standard hoods | facepieces

At Survivair, we understand
your need for interchangeable
blue 4000 | p100 egress
respiratory products and
systems. We provide one of the
most comprehensive lines of
respiratory protection equip-
ment in the industry, with an
emphasis on products that
convert easily for specific
blue 1™
applications. Stated simply,
we meet more worker’s needs
with less inventory. Like our
Pressure Demand and
Continuous Flow Supplied
Air Respirators. Their fully
interchangeable components hood with acetate lens blue 4000

deliver the highest level of opti-fit™

performance and significant
cost savings. For example,
our Pressure Demand Full
Facepiece converts to SCBA
and Hip-Pac applications.
Our Continuous Flow Full
Facepiece and Hoods convert
to Powered Air Purifying
Respirator uses, while the w4k hoods | facepieces
Full Facepiece and Half Mask
convert to Air Purifying
Respirators.

We also offer an extensive

selection of air and filtration
sources, including our Air
Cart, TravelPanels, Ambient
Air Pumps, and Cascade
components, to individualize
an SAR system that’s right for
you. Our unmatched variety premier®

and product flexibility ensure

that we always meet your
changing needs.

hood with polyester lens

hood with acetate lens

8600 series

12
standard couplings standard hoses standard pumps

schraeder

ambient air pumps

Survivair’s 1/4, 3/4 and 1-1/2
hansen horsepower Ambient Air Pumps are
sold separately. The 1/4 and 3/4
horsepower pumps are available as
complete SAR systems, including
high performance facepiece, air line hose and couplings.
These lightweight, highly portable air
foster sources are ideal for a variety of
applications including spray painting
and clean-up of hazardous materials.
Powered by 115-volt electric motors,
Survivair’s Ambient Air Pumps come
obac completely assembled and ready
lightweight for use.

w4k couplings w4k hoses w4k pumps

schraeder

ambient air pumps

hansen Survivair’s 1/4, 3/4 and 1-1/2
horsepower Ambient Air Pumps are
sold separately. The 1/4 and 3/4
3/8 inch horsepower pumps are available as
inside diameter hose complete SAR systems, including
industrial facepiece, air line hose and couplings.
interchange These lightweight, highly portable air
sources are ideal for a variety of
applications including spray painting
and clean-up of hazardous materials.
Powered by 115-volt electric motors,
snap tite 1/2 inch Survivair’s Ambient Air Pumps come
inside diameter hose completely assembled and ready
for use.

13
 sar supplied air respirators
survivair standard supplied air hoods and facepieces for grade d breathing air use

Survivair supplied air hoods have polyester lenses that are resistant to solvents
step 1 select a hood | facepiece and clean easily, making them ideal for automotive, painting, and other solvent
■ hood with polester lens based applications.
■ blue 1™ half mask
■ black 4000 full facepiece
■ blue 4000 full facepiece ordering information
■ opti-fit™ full facepiece (shown) hoods | facepieces
981820 Hood with Polyester Lens, Single Bib, Knit Collar
981310/00/20 Blue 1™ Mask Continuous Flow Supplied Air Respirator – Small | Medium | Large
981292/0 Black 4000 with 5-Point Suspension – Small | Standard Size
981214/04 Blue 4000 Full Facepiece with 4-Point Suspension and P100 Egress – Small | Standard Size
981212/00 Blue 40000 Full Facepiece with 4-Point Suspension – Small | Standard Size
981404/5/6 Opti-Fit™ Continuous Flow Supplied Air Respirator, Side Port – Small | Medium | Large
couplings
930820 Schraeder Kit
930830 Hansen Kit
930810 Foster Kit
930840 OBAC Kit
hoses
930801 3/8" Standard Pressure | 25'
930802 3/8" Standard Pressure | 50'
930804 3/8" Standard Pressure | 100'
930801 3/8" High Performance | 25'
930802 3/8" High Performance | 50'
930804 3/8" High Performance | 100'
accessories
step 2 select a coupling 981825 Clear Protective Lens Cover for Hoods
■ schraeder kit (shown)
981814 Hard Hat Strap for 4000 Series Full Facepiece
■ hansen kit 140635 Smoke-Tinted Polyester Peel-Off Lens Covers for 4000 Series Full Facepiece
■ foster kit b140095 Clear Polyester Peel-Off Lens Covers for 4000 Series Full Facepiece
■ obac kit 980003 Spectacles Kit for 4000 Series Full Facepiece
702019 Tinted Peel-Away Lens Covers for Opti-Fit ™Full Facepiece
702028 Clear Peel-Away Lens Covers for Opti-Fit™ Full Facepiece
962260 Spectacles Kit for Opti-Fit™ Full Facepiece
981847 Vortex Cooler Assy (Requires a minimum of 40 psi)

step 3 select a hose

3/8" x 25' | 50' | 100'
■ lightweight pressure
■ high performance
vortex cooler
for use with standard
or w4k sar’s

Cooling hot and humid ambient air by as much as 30° F (17°

C), Survivair’s Vortex Cooler keeps workers comfortable and
protective. It requires a minimum of 40 psi to operate. The
Survivair Vortex Cooler is NIOSH- certified for use with all of
Survivair’s Continuous Flow supplied Air respirators. The
Survivair Vortex Cooler has no moving or electrical parts to
break or repair. It is not compatible with Survivair Ambient
step 4 select a coupling Air Pumps or Pressure Demand SARs.
must match step2
ordering information
981847 Vortex Cooler Assembly (shown above)
14900724 W4K Personal Air Cooler (shown below)

14
survivair standard supplied air hoods and facepieces for ambient air pump use

step 1 select a hood | facepiece Survivair supplied air hoods have polyester lenses that are resistant to solvents
■ hood with polester lens and clean easily, making them ideal for automotive, painting, and other solvent
■ blue 1™ half mask based applications.
■ black 4000 full facepiece
■ blue 4000 full facepiece
■ opti-fit™ full facepiece ordering information
hoods | facepieces
981820 Hood with Polyester Lens, Single Bib, Knit Collar
981310/00/20 Blue 1™ Mask Continuous Flow Supplied Air Respirator – Small | Medium | Large
981292/0 Black 4000 with 5-Point Suspension – Small | Standard Size
981214/04 Blue 4000 Full Facepiece with 4-Point Suspension and P100 Egress – Small | Standard Size
981212/00 Blue 4000 Full Facepiece with 4-Point Suspension – Small | Standard Size
hoses
985241 Hose with OBAC Couplings for Ambient Air Pumps | 25'
985242 Hose with OBAC Couplings for Ambient Air Pumps | 50'
985244 Hose with OBAC Couplings for Ambient Air Pumps | 100'
air sources
985200 3/4 Horsepower Pump (Operates 1 Hood or 2 Tight-Fitting Facepieces)
985210 1/4 Horsepower Pump (Operates 1 Tight-Fitting Facepiece)
985225 1-1/2 Horsepower Pump (Operates 3 Hoods or 4 Tight-Fitting Facepieces)
985242 1/4 Horsepower Pump (Operates 1 Tight-Fitting Facepiece)
985244 1-1/2 Horsepower pump (Operates 3 Hoods or 4 Tight-Fitting Facepieces)
accessories
981825 Clear Protective Lens Cover for Hood for Hoods
981814 Hard Hat Strap for 4000 Series Full Facepiece
140635 Smoke-Tinted Polyester Peel-Off Lens Covers for 4000 Series Full Facepiece
b140095 Clear Polyester Peel-Off Lens Covers for 4000 Series Full Facepiece
980003 Spectacles Kit for 4000 Series Full Facepiece
702019 Tinted Peel-Away Lens Covers for Opti-Fit™ Full Facepiece
702028 Clear Peel-Away Lens Covers for Opti-Fit™ Full Facepiece
step 2 include coupling 962260 Spectacles Kit for Opti-Fit™ Full Facepiece
■ obac kit 981847 Vortex Cooler Assy for Hood (Requires a minimum of 40 psi)

step 3 select a hose

25' | 50' | 100'
with obac couplings for
ambient air pumps

standard sar assemblies

step 5 select air source
■ 1/4 horsepower ambient air pump ordering information
■ 3/4 horsepower ambient air pump 981441 Opti-Fit™ Small SAR | One-Person 1/4 hp Pump
■ 1-1/2 horsepower ambient air pump 981442 Opti-Fit™ Medium SAR | One-Person 1/4 hp Pump
981443 Opti-Fit™ Large SAR | One-Person 1/4 hp Pump
981451 One Opti-Fit™ Small SAR | One-Person/Two-Person 3/4 hp Pump
981452 One Opti-Fit™ Medium SAR | One-Person/Two-Person 3/4 hp Pump
981453 One Opti-Fit™ Large SAR | One-Person/Two-Person 3/4 hp Pump
981461 Two Opti-Fit™ Small SARs | Two-Person 3/4 hp Pump
981462 Two Opti-Fit™ Medium SARs | Two-Person 3/4 hp Pump
981463 Two Opti-Fit™ Large SARs | Two-Person 3/4 hp Pump
981852 Full SAR Hood | One-Person 3/4 hp Pump

15
 sar supplied air respirators
survivair w4k supplied air hoods and tight fitting for grade d breathing air use

step 1 select a hood | facepiece Survivair w4k supplied air hoods are used widely in pharmaceutical and other applications
hoods where solvent exposure is not an issue. Survivair polyester lenses are resistant to solvents
■ hood with acetate lens and clean easily, making them ideal for automotive, painting, and other solvent based
■ hood with polyester lens applications.
tight fitting
■ premier series half mask Biosystems™ TravelPanel
■ 8600 series full facepiece
ordering information 50MP Portable Air Filtration System
hoods
14510028 Acetate Lens with Single Bib, The Biosystems TravelPanel 50mp is a portable air
Standard Suspension and No Fitting filtration system designed to purify compressed
14510021 Acetate Lens with Double Bib, breathing air by removing water, oil, and
Ratchet Suspension and No Fitting particulates as small as 0.01 microns, organic
14510004 Acetate Lens with Single Bib,
Standard Suspension and Schraeder Fitting substances and odors, to provide Grade-D
14510019 Acetate Lens with Double Bib, breathing air for 1 to 4 workers using supplied
Ratchet Suspension and Schraeder Fitting air respirators. The TravelPanel 50mp can supply
14800027 Acetate Lens with Double Bib, 50 cubic feet per minute (CFM) of purified air and
Personal Air Cooler and Schraeder Fitting
14510030 Polyester Lens with Single Bib, regulates the outlet pressure to comply with
Hard Hat and Schraeder Fitting NIOSH requirements for your respirator. An
14510025 Polyester Lens with Double Bib, incorporated MultiPro™ gas detector monitors
Ratchet Suspension and Schraeder Fitting the air for CO (carbon monoxide) and the optional
tight fitting O2 sensor can also monitor the oxygen level. The
14310042/3/4 Premier® Series Silicone Half Mask MultiPro offers blackbox recording, calibration
with Schraeder Fitting –
Small | Medium | Large reminder and one button automatic calibration
14320151/2/3 8600 Series Silicone Facepiece with as standard features, all within the TravelPanel’s
TiteSeal and Schraeder Fitting – durable housing. Additional TravelPanel 50mp
Small | Medium | Large accessories include: built-in locking stabilizer legs,
14320148/9/50 8600 Series Silicon Facepiece with
5-Strap Headgear and Schraeder a bright red LED strobe, low pressure alarm, a
Fitting – Small | Medium | Large choice of alkaline or rechargeable batteries and a
coupling sets choice of Hansen or Schraeder outlet fittings.
step 2 select a coupling
■ schraeder kit 14900530/14900517 Industrial Interchange Set
14900532/14900531 Hansen Set ordering information
■ hansen kit
■ industrial interchange set 14900537/14900536 Snap Tite Set 54-50-abcdef TravelPanel 50MP with standard accessories.
14900357/14900524 Schraeder Set For code breakdown for ABCDE see Options
■ snap tite set (shown) below.
note: Choose when ordering hose with Schraeder fitting.
A = 1 CO
hoses 3 CO and O2
14900743 3/8" Hose with MPT | 25' B = 0 No Options
14900744 3/8" Hose with MPT | 50' 1 LED Strobe Light
14900745 3/8" Hose with MPT | 100' 2 Locking Stabilizer Legs
14900746 1/2" Hose with MPT | 50' 3 Both
step 3 select a hose 14900747 1/2" Hose with MPT | 100' C = 0 No Option
3/8" x 25' | 50' | 100' 14900748 3/8" Coiled Hose with MPT | 25' 1 Low Pressure Alarm
1/2" x 25' | 50' | 100' 14900744 3/8" Coiled Hose with MPT | 50' D= N Rechargeable
option: comes with mpt 14900185 3/8" Hose with Schraeder Fitting | 25' A Alkaline*
schrader fitting 14900186 3/8" Hose with Schraeder Fitting | 50' E = H Hansen outlet fitting
14900188 3/8" Hose with Schraeder Fitting | 100' S Schraeder outlet fitting
14900503 1/2" Hose with Schraeder Fitting | 50' F = 0 No Options
14900417 1/2" Hose with Schraeder Fitting | 100' 1 MultiPro with Full Datalogging Option
14900466 3/8" Coiled Hose with Schraeder Fitting | 25' 2 Dust Covers
14900509 3/8" Coiled Hose with Schraeder Fitting | 50' 3 Both
note: You must order an additional coupling set if 54-50-331nh Travel Panel 50MP with CO/O2 sensors,
you do not select a hose with Schraeder fittings. LED Strobe Light, Locking Stabilizer Legs, Low
Pressure Alarm, Rechargeable Battery, and
accessories Hansen Outlet Fittings
14900415 Clear Lens Cover 54-50-100nh Hansen Outlet Fittings
14900724 Personal Air Cooler 54-50-100ns Schraeder Outlet Fittings
14901010 Spectacles Kit travelpanel 50mp accessories
14900043 Neckstrap Kit 54-49-01 CO Sensor
step 4 select a coupling set 14901011 Clear Peel-Away Lens Covers
must match step 2 54-49-90 O2 Sensor
14901012 Blue Peel-Away Lens Covers 54-9033 Calibration/Test Gas, CO 50 ppm,
103 liters (requires 12-023 regulator)
54-9036 Calibration/Test Gas, CO 50 ppm,
34 liters (requires 12-022 regulator)
12-022 Regulator for 54-9036
12-023 Regulator for 54-9033
54-51-001 Calibration Kit
(includes 54-9033 CO calibration/test gas, 12-
023 regulator and foam lined plastic
carrying case)
54-51-002 Value Calibration Kit (includes 54-9036
CO calibration/test gas, 12-022 regulator
and carrying case)
54-51-003 Filter Kit (includes Pre-filter, Coalescing
filter, Charcoal filter and O-rings)
For additional information and to order the TravelPanel 50MP,
please visit www.biosystems.com or call Biosystems Customer
16 Service at 800.711.6776.
sar supplied air respirators
survivair w4k supplied air hoods and tight fitting for aaba use

step 1 select a hood | facepiece Survivair w4k supplied air hoods are used widely in pharmaceutical and other applications
hoods where solvent exposure is not an issue. Survivair polyester lenses are resistant to solvents
■ hood with acetate lens and clean easily, making them ideal for automotive, painting, and other solvent based
■ hood with polyester lens applications.
tight fitting
■ premier® series half mask (shown)
ordering information
■ 8600 series full facepiece
hoods
14510028 Acetate Lens with Single Bib, Standard Suspension and No Fitting
14510021 Acetate Lens with Double Bib, Ratchet Suspension and No Fitting
14510004 Acetate Lens with Single Bib, Standard Suspension and Schraeder Fitting
14510019 Acetate Lens with Double Bib, Ratchet Suspension and Schraeder Fitting
14510030 Polyester Lens with Single Bib, Hard Hat and Schraeder Fitting
14510025 Polyester Lens with Double Bib, Ratchet Suspension and Schraeder Fitting
tight fitting
14310042/3/4 Premier® Series Silicone Half Mask with Schraeder Fitting – Small | Medium | Large
14320151/2/3 8600 Series Silicone Facepiece with TiteSeal and Schraeder Fitting – Small | Medium | Large
14320148/9/50 8600 Series Silicon Facepiece with 5-Strap Headgear and Schraeder Fitting –
Small | Medium | Large
coupling sets
14900530/14900517 Industrial Interchange Set
14900532/14900531 Hansen Set
14900537/14900536 Snap Tite Set
14900357/14900524 Schraeder Set note: Choose when ordering hose with Schraeder fitting.
hoses
14900743 3/8" Hose with MPT | 25'
14900744 3/8" Hose with MPT | 50'
step 2 select a coupling 14900745 3/8" Hose with MPT | 100'
■ schraeder kit 14900746 1/2" Hose with MPT | 50'
■ hansen kit (shown) 14900747 1/2" Hose with MPT | 100'
■ industrial interchange set 14900185 3/8" Hose with Schraeder Fitting | 25'
■ snap tite set
14900186 3/8" Hose with Schraeder Fitting | 50'
14900188 3/8" Hose with Schraeder Fitting | 100'
14900503 1/2" Hose with Schraeder Fitting | 50'
14900417 1/2" Hose with Schraeder Fitting | 100'
14900466 3/8" Coiled Hose with Schraeder Fitting | 25'
step 3 select a hose 14900509 3/8" Coiled Hose with Schraeder Fitting | 50'
3/8" x 25' | 50' | 100' air sources
1/2" x 25' | 50' | 100' 14810178 Open Drip 1/4 Horsepower Pump (Operates 1 Tight-Fitting Facepiece)
option: comes with mpt 14810179 Open Drip 3/4 Horsepower Pump (Operates 1 Hood or 1 Tight-Fitting Facepiece)
schrader fitting 14810160 Open Drip 3/4 Horsepower Pump (Operates 1 Hood or 2 Tight-Fitting Facepieces)
14810028 Totally Enclosed 1-1/2 Horsepower Pump (Operates 2 Hoods or 3 Tight-Fitting Facepieces)
14810180 Explosion Proof 1-1/2 Horsepower Pump (Operates 2 Hoods or 3 Tight-Fitting Facepieces)
14810048 Totally Enclosed 3 Horsepower Pump (Operates 3 Hoods or 5 Tight-Fitting Facepieces)
14810169 Totally Enclosed 8a/230v, 1-1/2 Horsepower Pump (Operates 2 Hoods or 3 Tight-Fitting Facepieces)
14810181 Totally Enclosed 15a/230v, 3 Horsepower Pump (Operates 3 Hoods or 5 Tight-Fitting Facepieces)
accessories
14900415 Clear Lens Cover
14901010 Spectacles Kit
14900043 Neckstrap Kit
14901011 Clear Peel-Away Lens Covers
step 4 select a coupling 14901012 Blue Peel-Away Lens Covers
must match step 2

w4k sar assemblies

step 5 select air source
ordering information
■ 1/4 horsepower ambient air pump 14810188 One Worker Half Mask System
■ 3/4 horsepower ambient air pump 14810189 One Worker Full Facepiece System
■ 1-1/2 horsepower ambient air pump 14810214 One Worker Hooded System
14810190 Two Worker Full Facepiece System

17
 sar supplied air respirators
pressure demand

Survivair Pressure Demand (PD) Supplied

Air Respirators and Hip-Pacs provide the
highest level of interchangeability, protection,
and ease of operation.
• Full Facepiece PD SARs offer the simplicity and reliability
of Panther® mask-mounted regulators
• Hip-Pacs enhance protection in environments
immediately dangerous to life or health (IDLH),
with 5-, 10-, or 15-minute escape cylinders
• Panther PD SARs and Hip-Pacs provide significant cost
savings and convenience as part of fully interchangeable
respirator systems

tight-fitting pressure demand sar air line coupling hardware

ordering information ordering information
panther series, mask-mounted regulator air line coupling kits and individual couplings
p968446 Full Facepiece (Small), No Coupling, tc-19c-302 930810 Foster Kit (1 Each, Male and Female)
p968445 Full Facepiece (Medium), No Coupling, tc-19c-302 930424 Foster Coupling
p968447 Full Facepiece (Large), No Coupling, tc-19c-302 930429 Foster Plug
p968435 Full Facepiece (Classic), With P100, No Coupling, tc-84a-0229 930820 Schraeder Kit (1 Each, Male and Female)
p968437 Full Facepiece (Classic), Black (Welding), With p100 Escape, 930437 Schraeder Coupling
No Coupling, tc-84a-0229 930433 Schraeder Plug
panther series, mask-mounted regulator, 930830 Hansen Kit (1 Each, Male and Female)
930465 Hansen Coupling
with emergency escape
930466 Hansen Plug
p968455 Panther Hip-Pac®, With 5-Minute Escape (2216 psig, Aluminum),
Without Quick Disconnect, No Coupling, tc-13f-300 945007 Hansen Kit – Stainless Steel (1 Each, Male and Female)
p968457 Panther Hip-Pac, With 5-Minute Escape (2216 psig, Aluminum), 945010 Hansen Stainless Steel Coupling
With Quick Disconnect, No Coupling, tc-13f-300 945011 Hansen Stainless Steel Plug
p968475 Panther Hip-Pac, With 10-Minute Escape (3000 psig, Aluminum),
With Quick Disconnect, No Coupling, tc-13f-301 air line hose
p968477 Panther Hip-Pac, With 10-Minute Escape (3000 psig, Aluminum),
Without Quick Disconnect, No Coupling, tc-13f-301 ordering information
p968605 Panther Hip-Pac, With 10-Minute Escape (4500 psig, Fully Wrapped Carbon),
With Quick Disconnect, No Coupling, tc-13f-482 lightweight 3/8" hose
p968615 Panther Hip-Pac, With 10-Minute Escape (4500 psig, Fully Wrapped Carbon), 930801 25-Foot Hose Without Couplings
With Quick Disconnect, No Coupling, With COMPASS Integrated PASS Device, 930802 50 Foot Hose Without Couplings
With Buddy Breather, tc-13f-482 930804 100-Foot Hose Without Couplings
p968500 Panther Hip-Pac, With 15-Minute Escape (3000 psig, Hoop-Wrapped Fiberglass), high performance 3/8" hose
With Quick Disconnect, No Coupling, tc-13f-307
930870 10-Foot Hose Without Couplings
panther series, pressure demand sar and 930861 25-Foot Hose Without Couplings
hip-pac upgrade and conversion kits 930862 50-Foot Hose Without Couplings
p968452 Panther 5-Minute SCBA Conversion Kit (Hip-Pac Without Facepiece and 930864 100-Foot Hose Without Couplings
Regulator, With Quick Disconnect), No Coupling
p968453 Panther 5-Minute SAR Upgrade Kit (to Convert Pressure Demand SAR to Hip-Pac) standard accessories
p968472 Panther 10-Minute SCBA Conversion Kit (Hip-Pac, Aluminum Cylinder,
Without Facepiece and Regulator, With Quick Disconnect), No Coupling
ordering information
p968473 Panther 10-Minute SAR Upgrade Kit (to Convert Pressure Demand SAR
to Hip-Pac) 951015 Anti-Fog Solution (1 Ounce)
p968540 Panther 15-Minute SCBA Conversion Kit (Hip-Pac, Without Facepiece 951016 Anti-Fog Solution (16 Ounces)
and Regulator, With Quick Disconnect), No Coupling 962900 APR Adapter/Quantitative Fit Test Adapter, Pressure Demand SAR
p968535 Panther 15-Minute SAR Upgrade Kit (to Convert Pressure Demand SAR (No Nose Cup Included – TwentyTwenty/Twenty Twenty Plus Facepiece
to Hip-Pac) 962911 APR Adapter/Quantitative Fit Test Adapter, Pressure Demand SAR (Slotted
Medium Nose Cup Included – TwentyTwenty/TwentyTwenty Plus Facepiece
spare hip-pac cylinders 962912 APR Adapter/Quantitative Fit Test Adapter, Pressure Demand SAR
975081 Spare Cylinder (2216 psig, Aluminum), 5-Minute Hip-Pac (Slotted Standard Nose Cup Included – Classic Facepiece
975154 Spare Cylinder (3000 psig, Aluminum), 10-Minute Hip-Pac 962913 APR Adapter/Quantitative Fit Test Adapter, Pressure Demand SAR
917250 Spare Cylinder (4500 psig, Fully Wrapped Carbon), 10-Minute Hip-Pac (Slotted Large Nose Cup Included – Classic Facepiece
968513 Spare Cylinder (3000 psig, Hoop-Wrapped Fiberglass), 15-Minute Hip-Pac b140096 Facepiece Cleaner Box (100 Each)
140082 Facepiece Cleaner Canister (220 Each)
conversion kits for xl-style hip-pacs to panther hip-pacs 980500 Fit Test Adapter, Mark 2-Style Pressure Demand SAR
p968454 Panther Hip-Pac Without Cylinder, With Quick Disconnect, No Coupling 966065 Hip-Pac Bag
p968459 Panther Hip-Pac Without Cylinder, Without Quick Disconnect, No Coupling 968027 Hip-Pac Carrying Case (All Models)
b140095 Lens Cover (25 Each) – Classic Facepiece
702028 Lens Cover, Clear (25 Each) – TwentyTwenty Plus Facepiece
941899 Probed Full Facepiece Lens Kit – Classic Facepiece
962253 Probed Full Facepiece Lens Kit – TwentyTwenty Facepiece
962262 Probed Full Facepiece Lens Kit – TwentyTwenty Plus Facepiece
962920 Quantitative Fit Test Adapter, Panther-Style Pressure Demand SAR
(Requires 962900/11/12)
995605 SAR Video
941107 Spectacles Kit – XL-Style Facepiece
980003 Spectacles Kit – Classic Facepiece
962260 Spectacles Kit – TwentyTwenty/TwentyTwenty Plus Facepiece
980200 Suit Pass-Through Kit
940118 Zipper Facepiece Bag
18
 5 | 6 man regulator without couplings
12 | 13 isolation and bleed valve
8 | 9 audible alarm

1 | 2 tee connector
relief valve

plug
coupling
coupling
10 manifold with threaded plugs
11 threaded plug
12 | 13 isolation and bleed valve
3 | 4 pigtail hose

1 | 2 tee connector
air cart
Used as either a primary
air source or an emergency
air supply, the Survivair Air
Cart can contain up to two
independently operating 30-, 45-,
or 60-minute high pressure (4500 psig) cylinders, or up 3 | 4 pigtail hose

to two independently operating 30-minute low pressure cascade system 12 | 13 isolation and bleed valve
(2216 psig) cylinders. An inlet allows a regulated air source
to be used with an optional bypass to allow an unregulated A Cascade System consists of at least two storage cylinders interconnected
air source. The built-in manifold allows up to five Foster, by a series of couplings and pigtails. Compressed and purified Grade “D”
Hansen, or Schraeder quick-disconnect couplings to supply (minimum) air stored in the cylinders is drawn off through a pressure
air for up to five workers. A built-in low air warning whistle reducing regulator and supplied to the SAR system at the required pressure
sounds at 550 psig. level. A manifold can be used when supplying air for two or more workers.
A central filling station, typically located next to the storage cylinders can
provided the compressed and purified air to the cylinders in the Cascade
ordering information
System.
low pressure (2216 psig)
731200 Without Cylinders, Without Fittings
731240 High Pressure Bypass ordering information
cascade system components
note: Quick-Disconnect Sold Separately 1. 238010 Tee Connection, CGA 346 (3000 psi maximum)
high pressure (4500 psig) 2. 238009 Tee Connection, CGA 347 (5500 psi maximum)
731250 Without Cylinders, Without Fittings 3. 731158 Pigtail Hose, CGA 346 to CGA 347 (3000 psi maximum)
731245 High Pressure Bypass 4. 731157 Pigtail Hose, CGA 346 to CGA 347 (5500 psi maximum)
5. 912005 5-Man Regulator without Couplings (3000 psi Maximum)
6. 731020 5-Man Regulator Without Couplings (5500 psi maximum)
7. 960020 Relief Valve
8. 960603 Audible Alarm, CGA 346LP
9. 960642 Audible Alarm, CGA 347 HP
sar attachment kit for 10. 960050 Manifold With Threaded Plugs
1997-style panther and 11. 960056 Threaded Plug
cougar/puma scba’s 12. 731012 Isolation or Bleed Valve (3000 psi maximum)
13. 731013 Isolation or Bleed Valve (6000 psi maximum)
This kit enables Survivair Panther
SCBA users to utilize supplied
air sources easily and conveniently.
The kit contains: a short pigtail
hose with a Rectus male connector
on one end and a bare opposite end suit pass-through kit
(for use with Foster, Schraeder,
or Hansen quick-disconnect This NIOSH-certified fitting safely supplies air to
couplings); a strap and retainer Class A chemical suits, keeping out contaminants
which attach to the Survivair Panther waist strap to hold while allowing a quick-disconnect if escape is
the pigtail and incoming hose line; and a check valve which necessary. The pass-through can be used with Foster or
mounts onto the buddy breathing adapter block. The kit Schraeder quick-disconnect couplings. It is constructed of
requires the prior installation of a Survivair Panther buddy stainless steel and brass components to give it maximum
breathing kit (961148). The 961522 SAR attachment kit is resistance to corrosive chemicals. The pass-through is
available for the 2002-style Panther SCBA. recommended for use with suits of .020" to .080" thickness.

ordering information ordering information

961800 Supplied Air Attachment Kit, 1997-Style 980200 Suit Pass-Through Kit
Panther/Cougar/Puma SCBA
961522 Supplied Air Attachment Kit, 2002-Style Panther SCBA

19
 sar supplied air respirators
survivair w4k supplied air hoods and tight fitting for grade d breathing air use

step 1 select a hood | facepiece Survivair w4k supplied air hoods are used widely in pharmaceutical and other applications
hoods where solvent exposure is not an issue. Survivair polyester lenses are resistant to solvents
■ hood with acetate lens and clean easily, making them ideal for automotive, painting, and other solvent based
■ hood with polyester lens applications.
tight fitting
■ premier series half mask Biosystems™ TravelPanel
■ 8600 series full facepiece
ordering information 50MP Portable Air Filtration System
hoods
14510028 Acetate Lens with Single Bib, The Biosystems TravelPanel 50mp is a portable air
Standard Suspension and No Fitting filtration system designed to purify compressed
14510021 Acetate Lens with Double Bib, breathing air by removing water, oil, and
Ratchet Suspension and No Fitting particulates as small as 0.01 microns, organic
14510004 Acetate Lens with Single Bib,
Standard Suspension and Schraeder Fitting substances and odors, to provide Grade-D
14510019 Acetate Lens with Double Bib, breathing air for 1 to 4 workers using supplied
Ratchet Suspension and Schraeder Fitting air respirators. The TravelPanel 50mp can supply
14800027 Acetate Lens with Double Bib, 50 cubic feet per minute (CFM) of purified air and
Personal Air Cooler and Schraeder Fitting
14510030 Polyester Lens with Single Bib, regulates the outlet pressure to comply with
Hard Hat and Schraeder Fitting NIOSH requirements for your respirator. An
14510025 Polyester Lens with Double Bib, incorporated MultiPro™ gas detector monitors
Ratchet Suspension and Schraeder Fitting the air for CO (carbon monoxide) and the optional
tight fitting O2 sensor can also monitor the oxygen level. The
14310042/3/4 Premier® Series Silicone Half Mask MultiPro offers blackbox recording, calibration
with Schraeder Fitting –
Small | Medium | Large reminder and one button automatic calibration
14320151/2/3 8600 Series Silicone Facepiece with as standard features, all within the TravelPanel’s
TiteSeal and Schraeder Fitting – durable housing. Additional TravelPanel 50mp
Small | Medium | Large accessories include: built-in locking stabilizer legs,
14320148/9/50 8600 Series Silicon Facepiece with
5-Strap Headgear and Schraeder a bright red LED strobe, low pressure alarm, a
Fitting – Small | Medium | Large choice of alkaline or rechargeable batteries and a
coupling sets choice of Hansen or Schraeder outlet fittings.
step 2 select a coupling
■ schraeder kit 14900530/14900517 Industrial Interchange Set
14900532/14900531 Hansen Set ordering information
■ hansen kit
■ industrial interchange set 14900537/14900536 Snap Tite Set 54-50-abcdef TravelPanel 50MP with standard accessories.
14900357/14900524 Schraeder Set For code breakdown for ABCDE see Options
■ snap tite set (shown) below.
note: Choose when ordering hose with Schraeder fitting.
A = 1 CO
hoses 3 CO and O2
14900743 3/8" Hose with MPT | 25' B = 0 No Options
14900744 3/8" Hose with MPT | 50' 1 LED Strobe Light
14900745 3/8" Hose with MPT | 100' 2 Locking Stabilizer Legs
14900746 1/2" Hose with MPT | 50' 3 Both
step 3 select a hose 14900747 1/2" Hose with MPT | 100' C = 0 No Option
3/8" x 25' | 50' | 100' 14900748 3/8" Coiled Hose with MPT | 25' 1 Low Pressure Alarm
1/2" x 25' | 50' | 100' 14900744 3/8" Coiled Hose with MPT | 50' D= N Rechargeable
option: comes with mpt 14900185 3/8" Hose with Schraeder Fitting | 25' A Alkaline*
schrader fitting 14900186 3/8" Hose with Schraeder Fitting | 50' E = H Hansen outlet fitting
14900188 3/8" Hose with Schraeder Fitting | 100' S Schraeder outlet fitting
14900503 1/2" Hose with Schraeder Fitting | 50' F = 0 No Options
14900417 1/2" Hose with Schraeder Fitting | 100' 1 MultiPro with Full Datalogging Option
14900466 3/8" Coiled Hose with Schraeder Fitting | 25' 2 Dust Covers
14900509 3/8" Coiled Hose with Schraeder Fitting | 50' 3 Both
note: You must order an additional coupling set if 54-50-331nh Travel Panel 50MP with CO/O2 sensors,
you do not select a hose with Schraeder fittings. LED Strobe Light, Locking Stabilizer Legs, Low
Pressure Alarm, Rechargeable Battery, and
accessories Hansen Outlet Fittings
14900415 Clear Lens Cover 54-50-100nh Hansen Outlet Fittings
14900724 Personal Air Cooler 54-50-100ns Schraeder Outlet Fittings
14901010 Spectacles Kit travelpanel 50mp accessories
14900043 Neckstrap Kit 54-49-01 CO Sensor
step 4 select a coupling set 14901011 Clear Peel-Away Lens Covers
must match step 2 54-49-90 O2 Sensor
14901012 Blue Peel-Away Lens Covers 54-9033 Calibration/Test Gas, CO 50 ppm,
103 liters (requires 12-023 regulator)
54-9036 Calibration/Test Gas, CO 50 ppm,
34 liters (requires 12-022 regulator)
12-022 Regulator for 54-9036
12-023 Regulator for 54-9033
54-51-001 Calibration Kit
(includes 54-9033 CO calibration/test gas, 12-
023 regulator and foam lined plastic
carrying case)
54-51-002 Value Calibration Kit (includes 54-9036
CO calibration/test gas, 12-022 regulator
and carrying case)
54-51-003 Filter Kit (includes Pre-filter, Coalescing
filter, Charcoal filter and O-rings)
For additional information and to order the TravelPanel 50MP,
please visit www.biosystems.com or call Biosystems Customer
16 Service at 800.711.6776.
sar supplied air respirators
survivair w4k supplied air hoods and tight fitting for aaba use

step 1 select a hood | facepiece Survivair w4k supplied air hoods are used widely in pharmaceutical and other applications
hoods where solvent exposure is not an issue. Survivair polyester lenses are resistant to solvents
■ hood with acetate lens and clean easily, making them ideal for automotive, painting, and other solvent based
■ hood with polyester lens applications.
tight fitting
■ premier® series half mask (shown)
ordering information
■ 8600 series full facepiece
hoods
14510028 Acetate Lens with Single Bib, Standard Suspension and No Fitting
14510021 Acetate Lens with Double Bib, Ratchet Suspension and No Fitting
14510004 Acetate Lens with Single Bib, Standard Suspension and Schraeder Fitting
14510019 Acetate Lens with Double Bib, Ratchet Suspension and Schraeder Fitting
14510030 Polyester Lens with Single Bib, Hard Hat and Schraeder Fitting
14510025 Polyester Lens with Double Bib, Ratchet Suspension and Schraeder Fitting
tight fitting
14310042/3/4 Premier® Series Silicone Half Mask with Schraeder Fitting – Small | Medium | Large
14320151/2/3 8600 Series Silicone Facepiece with TiteSeal and Schraeder Fitting – Small | Medium | Large
14320148/9/50 8600 Series Silicon Facepiece with 5-Strap Headgear and Schraeder Fitting –
Small | Medium | Large
coupling sets
14900530/14900517 Industrial Interchange Set
14900532/14900531 Hansen Set
14900537/14900536 Snap Tite Set
14900357/14900524 Schraeder Set note: Choose when ordering hose with Schraeder fitting.
hoses
14900743 3/8" Hose with MPT | 25'
14900744 3/8" Hose with MPT | 50'
step 2 select a coupling 14900745 3/8" Hose with MPT | 100'
■ schraeder kit 14900746 1/2" Hose with MPT | 50'
■ hansen kit (shown) 14900747 1/2" Hose with MPT | 100'
■ industrial interchange set 14900185 3/8" Hose with Schraeder Fitting | 25'
■ snap tite set
14900186 3/8" Hose with Schraeder Fitting | 50'
14900188 3/8" Hose with Schraeder Fitting | 100'
14900503 1/2" Hose with Schraeder Fitting | 50'
14900417 1/2" Hose with Schraeder Fitting | 100'
14900466 3/8" Coiled Hose with Schraeder Fitting | 25'
step 3 select a hose 14900509 3/8" Coiled Hose with Schraeder Fitting | 50'
3/8" x 25' | 50' | 100' air sources
1/2" x 25' | 50' | 100' 14810178 Open Drip 1/4 Horsepower Pump (Operates 1 Tight-Fitting Facepiece)
option: comes with mpt 14810179 Open Drip 3/4 Horsepower Pump (Operates 1 Hood or 1 Tight-Fitting Facepiece)
schrader fitting 14810160 Open Drip 3/4 Horsepower Pump (Operates 1 Hood or 2 Tight-Fitting Facepieces)
14810028 Totally Enclosed 1-1/2 Horsepower Pump (Operates 2 Hoods or 3 Tight-Fitting Facepieces)
14810180 Explosion Proof 1-1/2 Horsepower Pump (Operates 2 Hoods or 3 Tight-Fitting Facepieces)
14810048 Totally Enclosed 3 Horsepower Pump (Operates 3 Hoods or 5 Tight-Fitting Facepieces)
14810169 Totally Enclosed 8a/230v, 1-1/2 Horsepower Pump (Operates 2 Hoods or 3 Tight-Fitting Facepieces)
14810181 Totally Enclosed 15a/230v, 3 Horsepower Pump (Operates 3 Hoods or 5 Tight-Fitting Facepieces)
accessories
14900415 Clear Lens Cover
14901010 Spectacles Kit
14900043 Neckstrap Kit
14901011 Clear Peel-Away Lens Covers
step 4 select a coupling 14901012 Blue Peel-Away Lens Covers
must match step 2

w4k sar assemblies

step 5 select air source
ordering information
■ 1/4 horsepower ambient air pump 14810188 One Worker Half Mask System
■ 3/4 horsepower ambient air pump 14810189 One Worker Full Facepiece System
■ 1-1/2 horsepower ambient air pump 14810214 One Worker Hooded System
14810190 Two Worker Full Facepiece System

17
 scba industrial self contained breathing apparatus
survivair cougar™ survivair puma™

The Survivair Cougar meets the demands Survivair’s Puma is the first NIOSH-
of industrial users who want the finest certified, OSHA-compliant, hooded
respiratory protection against environments pressure demand SCBA designed to fit
that are immediately dangerous to life or over beards and glasses. The Puma is a
health (IDLH), but do not require the Cougar with a tight-fitting hood and is
performance of an NFPA-compliant SCBA. rated for entry into IDLH environments.
The Cougar design eliminates unnecessary The hood is made from Responder ®
fire fighting features, keeping costs under material, one of the finest hazmat suit
control for today’s dollar-conscious materials available. The Puma has a flexible
industrial users, yet provides superior neoprene neck seal that allows the user
safety and comfort. to wear a beard, so long as it doesn’t break
the seal. Nor is there a need for spectacles
facepiece kits — the user can wear normal street
• Silicone rubber provides unsurpassed comfort and glasses (although sports straps on the
durability, even in extreme heat or cold. Won’t oxidize temples are useful to keep the glasses in
or react with ozone. Also provides better sealing ability
for improved comfort and fit. Five-strap head harness
place while donning).
and skirt are available in three color-coded sizes
(TwentyTwenty® Plus facepiece). Available in small and hood features
standard sizes in blue and black (Classic™ facepiece). • Coated, Responder® multi-layer polypropylene material
• Optional Headnet™ mesh-style head harness provides permeation barrier
• Easily removable exhalation valve for faster and easier • Flexible neoprene neck seal provides excellent protec-
servicing tion against contaminants in IDLH atmospheres
• Easily removable exhalation valve for fast and easy serv-
first stage regulator icing
• Minimal moving parts dramatically enhances reliability, • Factory-installed silicone nose cup; available in 3 sizes;
while reducing maintenance costs. Choice of three low reduces fogging and CO2 buildup in hood
air alarms – bell, plain whistle, or warbling whistle
ordering information
second stage regulator
777777 puma
• Compact, low profile
• Air Klic™ fastening system Stock configuration includes: Cougar, 2216 psig, without
alarm, without cylinder, without facepiece, with Panther-
• First-Breath-On style first stage with bell alarm (p964323). 2216 psig,
• Better downward vision, less chance of damage 30-minute aluminum cylinder, without locking collar
• Allows attachment in any orientation (915141). (968006) Puma hood with medium nose cup.
• Regulator holder on waist strap allows regulator to be Pumas are configured in the same manner as Cougars,
kept in stand-by mode with many choices available. See your local Survivair
distributor for more information.
backpack
Mighty-Light® is one of the lightest, easiest to use, and
most comfortable backpacks in the industry
• No tools required – no bolts or screws on harness for
quick, easy disassembly and assembly

ordering information
888888 cougar
Stock configuration includes: Cougar, 2216 psig, without
alarm, without cylinder, without facepiece, with Panther-
style first stage with bell alarm (p964323). 2216 psig,
30-minute aluminum cylinder, without locking collar
(915141). TwentyTwenty® Plus facepiece, medium, black,
medium nose cup, silicone headstrap (252022).
Cougars may be ordered in many additional
configurations.
See your local Survivair distributor for more information.

20
survivair panther® | crbn scba – ask us about our cbrn approved panther scba!

The Survivair Panther is the strongest, heads-up display (hud)

most rugged SCBA we have ever made. • Hard-wired for enhanced reliability
Panther’s design is based on consultation • Single lithium battery provides long life, less hassle
with hundreds of firefighters and on and expense
• Battery indicator on transducer module provides
Survivair’s many years of experience in at-a-glance status
the industry. Its many features to enhance • Display module with colored LEDs on second
function and fit—including our new stage regulator displays cylinder pressure status
Heads-Up Display (HUD)—have made continuously.
Panther one of the leading SCBAs in the • Protected display easily seen by user; wide-span
“gas gauge” style easy to read
industry.
• 50%, 25%, and 10% low air visual alarms keep users
informed of pressure milestones
twentytwenty® plus facepiece • Photodiode senses ambient light conditions, dims and
• Surgical grade silicone skirt provides superior comfort brightens for optimum visibility
and fit. Rugged and durable, it will not melt or burn in • External low air visual alarm alerts others to user’s
high heat or direct flame 25% and 10% low air status
• Hard-coated polycarbonate lens resists scratching;
rugged and durable under extreme conditions accessories
• Rims, nozzle cover and Air Klic™ made of super-tough Panther is available with a wide range of options
plastic; able to withstand drops up to 30 feet onto and accessories, including voice amplification, radio
concrete communications, integrated PASS device, back-mounted
• Separate paths for inhalation and exhalation eliminate remote alarm module for integrated PASS device, buddy
cross-contamination. Low exhalation resistance breather, auxiliary coupling for rapid intervention
• Multiple skirt and nose cup sizes, choice of silicone “daisy chaining,” supplied air attachment, and more.
or mesh head harness, and choice of skirt colors
ordering information
mighty-light® backpack 999999 panther
• Ergonomically designed, strong and comfortable,
Stock configuration includes: Panther, 4500 psig, without
Mighty-Light is one of the lightest backpacks on the
cylinder, without facepiece, with warbling whistle alarm
market (969008). 4500 psig, 30-minute carbon cylinder, without
• Fiberglass-filled nylon backplate and blended Kevlar® locking collar (917133). TwentyTwenty® Plus facepiece,
and Nomex® harness provide high heat and flame medium, black, medium nose cup, Headnet (252026).
resistance COMPASS integrated PASS device (x963700). Over-the-
• Functional design allows weight to be carried on hips, shoulder buddy breather with SAR check valve (x965119).
not shoulders Panthers may be ordered in many additional
configurations.
first stage pressure reducer
See your local Survivair distributor for more information.
• Piston and spring fail-safe design is simple and reliable,
with few moving parts. Does not require adjustment
• Choice of audible alarms (bell, plain whistle, or warbling
whistle)
• Rapid Intervention Crew/Company Universal Air
Connection (RIC UAC) satisfies NFPA 1981 requirements
for fast fill for rapid intervention
• Attaches directly to cylinder valve via CGA connection;
eliminates potential safety hazard of high-pressure
hose

second stage regulator

• Simple, reliable pilot valve makes regulator light and
compact. Few moving parts require less maintenance
• Air Klic fastening system provides easy, quick
attachment
• First-Breath-On (FBO) mechanism automatically
activates air flow. Shutoff button resets FBO and
stops air flow
• Super tough plastic withstands drops of 30 feet
onto concrete